Related
How to flash gene via memory card?
if possible give the instructions please
it is very easy so no one answer ?
OR it is impossible so no one answer ?
sd card flashing
polifon said:
How to flash gene via memory card?
if possible give the instructions please
Click to expand...
Click to collapse
hi, you must place the rom on the sd card and then softrest while holding down the camera button. this will make the phone enter the bootloader and look for a rom on the sd card. i think that roms have to be specially cooked to be flashef in this way
zinzar said:
it is very easy so no one answer ?
OR it is impossible so no one answer ?
Click to expand...
Click to collapse
yes it is too easy with a search in this forum so no one bother to reply...i think....
Format SD-Card as FAT32.
rename RUU_Siged.nbh to GENEIMG.nbh, Put GENEIMG.nbh on SD-CARD (root).
Charge your device at 100%!
Insert SD-Card in Gene, press AND HOLD "Camera" button, and do soft-reset.
If you see white screen with "Reading SD content":
Release "Camera" button, wait, and when countdown (start from 10s) in left-bottom corner of screen is appear, press "Power" button. Flashing is begin, and approx. 8 minutes long. After you will see "Success. Press any key". Do soft-reset. Congratulation.
PS: not all the rom can be flash via SD card, if you failed, do it the normal way with USB RUU
rexypow said:
yes it is too easy with a search in this forum so no one bother to reply...i think....
Format SD-Card as FAT32.
rename RUU_Siged.nbh to GENEIMG.nbh, Put GENEIMG.nbh on SD-CARD (root).
Charge your device at 100%...........................
PS: not all the rom can be flash via SD card, if you failed, do it the normal way with USB RUU
Click to expand...
Click to collapse
One thing more
In normal way by flashing using PC i make this before
1.Olipro's SPL for Old Gene
2. i have now white screen so i can flash the rom otherwise the device will breakdown if i did not jump the spl
SO by sd card there is no need to jump spl or what , explain please
greate very usefull info thanks
@Zinzar: I have never used JumpSPL trick, right from the time i flashed my first ROM, i flashed the HardSPL and as mine is a New Gene the Olipro method bricked it and then i unbricked it using Orefkov's method. HardSPL is permanently applied and is never needed to apply again. After that you can flash your phone in both way, RUU and SD Card. NO special thing is needed to do. just format the sd card with Fat32, 4096 kb cluster size (the default one), put the RUU_Signed.nbh on sd card and rename it to GENEIMG.nbh, reboot the phone in bootloader mode and it will read the rom file from sd card. After that just follow the onscreen instructions.
I hope i have answered your query coz i dont really got your question.
active sync not working after rom upgrade from sd card
hi all,
i have recently upgrade rom ver 6.5 21501 using sd card method.
now my gene could not connet with my pc for active sync.
i want to use other rom like 19971wwe_fusion9.nbh by lomlom. i like it very much.
when i soft-reset with camera button pressed, there is a try colour screen but don't show there below "usb", when i connect my phone to pc using cable.
please provide me the solution...
thanks to all....
during update from SD card...... it says reading second OS from SD, and then says "SD FAT update failed !!!"....... also is there a deriver for the 64-bit version of the USB method???
How to flash rom on gene from the sd card
hi
pls see below details for the same
.HOW TO FLASH ROM ON GENE FROM THE SD CARD
1. Rename the .nbh file of your rom of choice to GENEIMG.nbh, drop into the root of your SD card.
2.Poweroff your phone
3.hold the volume down key and while continuing to hold it power on ur phone
4. The Phone will go into the bootloader mode, and will auto detect the rom image from the SD Card and ask if you want to proceed by hitting the power button. Hit the power button and the rom will install
Note : it should take about 10-15 mins (as of now i have not tried this try at ur own risk )
also make sure that ur SD card is Fat32 or format the same to Fat32 & use a smaller memory card the smaller the better
this is as per my experience using the above method on my previous phone ie gene(P3400i)
correct me if im wrong
thanks
hari
i exactly did that..... i'm using a 2GB micro SD with an adapter.... it detects, starts, but at the reading second OS stage it fails with the error...........
Also RUU fails for 64bit system (Using Win7 HP x64).... did it on a friends 32bit....
shantanuthatte said:
i exactly did that..... i'm using a 2GB micro SD with an adapter.... it detects, starts, but at the reading second OS stage it fails with the error...........
Also RUU fails for 64bit system (Using Win7 HP x64).... did it on a friends 32bit....
Click to expand...
Click to collapse
rename the ruu_signed.nbh to GENEIMG.nbh and the flash a custom rom via storage card.
rom upgrading works very fine on win7 64bit.you Just need to use the right drivers for the same.
karan999 said:
rename the ruu_signed.nbh to GENEIMG.nbh and the flash a custom rom via storage card.
rom upgrading works very fine on win7 64bit.you Just need to use the right drivers for the same.
Click to expand...
Click to collapse
yes i did rename the file, then formated using fat32, 4096 allocation size.... copy the renamed file, inserted in phone, reset + camera button.... then power befor 10secs........ the process saarts but as i said... fails when it tries to read second OS......... the driver specifies for win7, vista in the guide works only for 32bit systems....
shantanuthatte said:
yes i did rename the file, then formated using fat32, 4096 allocation size.... copy the renamed file, inserted in phone, reset + camera button.... then power befor 10secs........ the process saarts but as i said... fails when it tries to read second OS......... the driver specifies for win7, vista in the guide works only for 32bit systems....
Click to expand...
Click to collapse
hi
make sure u put the rom on the root of ur SD not inside any folder OK
thanks
hari
yes there is only one file.... GENEIMG.nbh, no folder, no other file..... I tried with three ROMs, two customs by others, third one my own but a stock 21911 ie without changing anything all fail at same stage.... I has earlier (long before) HardSLP'ed mine to Oref.........
hi,all,the money slot of my atom life is BAD,and the rom is Atom Life WM6 ROM Upgrade (ENG) WWE_RC2140907B2 from http://www.myxda.com
now i want update wm6.1(wm6.5 is ok too),then how can i do?what download the file?
thx all.
Smile [28Sep] Atom Life Wm6.5 COM2-21859 COM3-23053 COM4-23414 + How To Build the k
nikoused said:
hi,all,the money slot of my atom life is BAD,and the rom is Atom Life WM6 ROM Upgrade (ENG) WWE_RC2140907B2 from http://www.myxda.com
now i want update wm6.1(wm6.5 is ok too),then how can i do?what download the file?
thx all.
Click to expand...
Click to collapse
You can start here
http://forum.xda-developers.com/showthread.php?t=551760
juliuscezar said:
You can start here
http://forum.xda-developers.com/showthread.php?t=551760
Click to expand...
Click to collapse
i download files from http://forum.xda-developers.com/showpost.php?p=4392044&postcount=1
and the file name is AL1.dio
i think al1.dio file must
"
3. Copy AL1.DIO to card. (See to it that there are no other files in the card)
4. Insert card to memory slot of your device. Press and hold record button (beside the camera button) and reset button ?
"
i am wrong?
HOW TO FLASH THE ROM:
1. You must have at least 70% battery.
2. Use mini-SD card and format it to FAT16 (only use 2GB capacity and below, don't use SDHC card for it will not be recognized)
3. Copy AL1.DIO to card. (See to it that there are no other files in the card)
4. Insert card to memory slot of your device. Press and hold record button (beside the camera button) and reset button simultaneously. Wait until BOOTLOADER mode appears saying "SD CARD DETECTED", release the buttons.
5. Wait till it finishes until the O2 logo and splash screen appear. Follow the on screen steps. HAPPY FLASHING!!!
http://forum.xda-developers.com/showpost.php?p=4358549&postcount=1
firestonez said:
HOW TO FLASH THE ROM:
1. You must have at least 70% battery.
2. Use mini-SD card and format it to FAT16 (only use 2GB capacity and below, don't use SDHC card for it will not be recognized)
3. Copy AL1.DIO to card. (See to it that there are no other files in the card)
4. Insert card to memory slot of your device. Press and hold record button (beside the camera button) and reset button simultaneously. Wait until BOOTLOADER mode appears saying "SD CARD DETECTED", release the buttons.
5. Wait till it finishes until the O2 logo and splash screen appear. Follow the on screen steps. HAPPY FLASHING!!!
Click to expand...
Click to collapse
yeah,i talk aout how to flash the rom,
and i think i khnow how to fash the rom with the GOOD mini sd slot
but my slot is NOT work well
anyway ,thanks
Maybe you should change your SD card to test it...
AFAIK Not on every SD Card supported to flash via SD Slot...so try it first with different SD brand...
cmiiw
Chaly said:
Maybe you should change your SD card to test it...
AFAIK Not on every SD Card supported to flash via SD Slot...so try it first with different SD brand...
cmiiw
Click to expand...
Click to collapse
i have used 4 sd card what all work well on my friend's phones
MY O2 Atom Life's rom is Atom Life WM6 ROM Upgrade (CHT) WWE_RC2140907B2 from seeo2.com,
it is ok, no problem
Hello everybody!
I hope you can help me.
I got HD2 European.First when i unpack it,it was the official firmware 1.66,i downloaded the last one,and flashed it,after i made HSPl.It was good,but the custom that i was downloaded was a bit buggy,so i wanted to make an back up to old,official.I tried to flash it form my sd card,but here starts the most weird thinks.Its not flashing from sd card.I removed the HSPL,by the HSPL method and chose the 2.08.0000(from some forum told me to do that,to remove hspl)
But now i got memory bag,i cant install any program because there is no memory.
Please help me,how can i flash it with original firmware,to make it as it was from the shop?
Why its not flashing from sd card?(i tried on 3 sd cards,but still nothing.....)
I see the boot,starts the loading for a sec,and again boot.
Thx to everyone who can help me.
(I got the last firmware,boot 2080000)
anyone?
Please???
Put the phone into Bootloader Mode (with phone off, press and hold the Volume Down button, then tap the Power button). what does it display?
What size of SD card did you try to use to do the flashing with?
iannius said:
Hello everybody!
I hope you can help me.
I got HD2 European.First when i unpack it,it was the official firmware 1.66,i downloaded the last one,and flashed it,after i made HSPl.It was good,but the custom that i was downloaded was a bit buggy,so i wanted to make an back up to old,official.I tried to flash it form my sd card,but here starts the most weird thinks.Its not flashing from sd card.I removed the HSPL,by the HSPL method and chose the 2.08.0000(from some forum told me to do that,to remove hspl)
But now i got memory bag,i cant install any program because there is no memory.
Please help me,how can i flash it with original firmware,to make it as it was from the shop?
Why its not flashing from sd card?(i tried on 3 sd cards,but still nothing.....)
I see the boot,starts the loading for a sec,and again boot.
Thx to everyone who can help me.
(I got the last firmware,boot 2080000)
Click to expand...
Click to collapse
Hi
Can you flash via your computer with active sync or windows mobile device center?
Its better than using the sd card, as the micro sd i had was corrupted.
If you need stock roms : http://forum.xda-developers.com/showthread.php?t=623283
Russ
I flashed a stock rom
_HTC HD2_RUU_Leo_HTC_NLD_1.66.404.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship
and now I check my bootloader and it says
spl-2.08 cotullahspl
so what's wrong?
I saw around the forum that hspl is erased after stock flash?
whats wrong?
hspl is only erased if you restore an official rom from your microSD card.
This is noted in 4) in the HSPL thread.
dtechnology said:
hspl is only erased if you restore an official rom from your microSD card.
Click to expand...
Click to collapse
so how do I do that?
can it be done with my 8GB / 1GB sd?
what files do I import to my sd and how do I flash it?
You should really put a little more effort in searching yourself than just asking questions. If you read the HSPL thread it is all noted there and this question has been asked 1,000,000.48 times already.
okay, thanks anyways for the answer, I will check into it
Check this
Run HSPL3_PKG.exe and select SPL 1.66.0000 or a different Version with 0000 at the end.
HectiQ said:
so how do I do that?
can it be done with my 8GB / 1GB sd?
what files do I import to my sd and how do I flash it?
Click to expand...
Click to collapse
No sir, Don't use a 8GB SD-card to flashing Stock ROM!
Maximum 2GB is recommended.
Steps:
- Right klick on the HTC HD2_RUU_Leo_HTC_NLD_1.66.404.1_Radio_Signed_15.30. 50.07U_2.06.51.07_Ship select Extract (Winzip/Zip7/...)
- Copy the "RUU_signed.nbh" to SD card
- Rename the "RUU_signed.nbh" to "leoimg.nbh"
- Reset the device while pressing the volume down button.
- Follow the steps on your device.
Why wouldn't you be able to use a 8GB card? The only card I have is 8GB and I've used it 2 times to restore stock rom and it has gone perfectly...
[edit]
I just tried it again it at least works perfectly for me:
1. Format SD card through windows (FAT32)
2. place leoimg.nbh of official rom on it
3. Hold voldown and power to enter bootloader screen and press power to flash
It dit restart once about 20% through with a big exclimation mark, but restarted immidiatly and completed the flashing.
This has happened once before when I had HSPL'ed my device and restored it this way.
[/edit]
dtechnology said:
Why wouldn't you be able to use a 8GB card? The only card I have is 8GB and I've used it 2 times to restore stock rom and it has gone perfectly...
Click to expand...
Click to collapse
The reason way I mentioned (don't use a 8GB SD-card) is based on the feedback of users.
Flash stock ROM over a 8GB SD_cards don't work in almost 70% of the cases. so to prevent (lot of troubles) We mention to use preferable a 2GB or a 4GB SD (the latest who works in 85% of the cases)
ok guys, thanks for the feedback
+1 thanks for everyone
Here's the problem I had WP7 nand, micro usb broke, sent it away I need a new main-board (boooo) so dual booted with android for a while, now I have flashed via sd card but feel its very laggy due to not been formatted, is there a way to task 29 with the need of a usb cable yet???
I no its a long shot but worth a go
Demon_man said:
Here's the problem I had WP7 nand, micro usb broke, sent it away I need a new main-board (boooo) so dual booted with android for a while, now I have flashed via sd card but feel its very laggy due to not been formatted, is there a way to task 29 with the need of a usb cable yet???
I no its a long shot but worth a go
Click to expand...
Click to collapse
Extract the task 29.exe file. Find the file named "RUU_signed.nbh"
Rename it with "leoimg.nbh". Copy it to the root of SD card.
Turn off the phone. Go into bootloader (press vol down + power on buttons).
Make sure you have HSPL installed before doing it.
And keep in mind it will erase MAGLDR + ROM. You cannot reflash MAGLDR via SD Card.
Good luck
well this is what I know about Task 29. It has to have a .nbh file to flash, but Task 29 runs after the .nbh has been flashed. So I am not really sure if this is possible or not as this means the actual task 29.exe is seperate from the .nbh meaning it is not contained in the .nbh file.
silverwind said:
Extract the task 29.exe file. Find the file named "RUU_signed.nbh"
Rename it with "leoimg.nbh". Copy it to the root of SD card.
Turn off the phone. Go into bootloader (press vol down + power on buttons).
Make sure you have HSPL installed before doing it.
And keep in mind it will erase MAGLDR + ROM. You cannot reflash MAGLDR via SD Card.
Good luck
Click to expand...
Click to collapse
I am stupid here and seeking knowledge. I thought that would just flash the radio, to actually perform the Task 29 or initiate the Task 29.exe file you would have to be using a RUU.
I mean a official ROM runs a Task 28 before flashing a ROM package when flashing via RUU. But I thought you had to have the RUU to initiate the Task 28.exe file. Like I said in my other post the Task 29.exe and Task 28.exe files are not contained in the .nbh files and that is what you are flashing when flashing via SD card. the other files that are in a rom zip file are all used by the RUU.
So I need to get my self a stock rom and grab the task.exe, I don't wanna go back to stock, I wanna re-flash this custom rom, so i can re-name it to LEOIMG.nbh whack both files on a blank formatted FAT32 sd card.
Whats the chances of this not working, will it go wrong or would it just flash the rom anyhow, like I said I have no usb at all, so i can only use my sd cards.
oh yeah I already lost magdlr as far as i no by going back to winmo, im not bothered about that if i want android again i can boot from sd
There's a 100% chance that it wont task29.
as outlined above, the nbh file is only there because ruu wont run without one, which is why you can use boot image nbh, radio nbh or even a blank nbh with task29.exe. The task29 ruu is a standard ruu hex edited to perform the task29, so flashing the nbh from SD will do just that... flash the nbh.
Putting the. Exe onto SD wont help since it isn't a winmo exe.
Thanks Sam I kinda thought that after I read through these post's again, I have changed to NRG rom and all seems fine now anyway, but like I said in the first post was worth a shot to see if it could be done,