Related
Good evening all!
It seems that I may have made a mistake! Either that or my mind is to tired to think strait! Please help!
Firstly, after having several successful attempts at flashing custom roms/radios and experimenting with my device, I thought I had finally found the ROM of choice! Here's what I have done: performed a task29 run to clean up any straggling files ... normal process right!? No! I forgot the most important step to the process before totally wiping all information off my phone. I formatted my SD card without adding any type of rom to my device before running task29. I've tried running the customRUU tool from my PC and have had zero luck. My phone attempts to boot with none of the red text in the loading screen and just hangs. I can enter the bootloader screen but I still have zero luck on getting anything to work from the customruu tool.
Any information that anyone could willing provide would be greatly apprecaited!! I apologies for wasting anyones time!
Thanks in advance,
Braizy <<<< (Noob!)
Braizy said:
Good evening all!
It seems that I may have made a mistake! Either that or my mind is to tired to think strait! Please help!
Firstly, after having several successful attempts at flashing custom roms/radios and experimenting with my device, I thought I had finally found the ROM of choice! Here's what I have done: performed a task29 run to clean up any straggling files ... normal process right!? No! I forgot the most important step to the process before totally wiping all information off my phone. I formatted my SD card without adding any type of rom to my device before running task29. I've tried running the customRUU tool from my PC and have had zero luck. My phone attempts to boot with none of the red text in the loading screen and just hangs. I can enter the bootloader screen but I still have zero luck on getting anything to work from the customruu tool.
Any information that anyone could willing provide would be greatly apprecaited!! I apologies for wasting anyones time!
Thanks in advance,
Braizy <<<< (Noob!)
Click to expand...
Click to collapse
Dude, you should be able to hold down the volume down button before powering on the device. You should get to the bootloader screen with no issues and be able to establish an ActiveSync <--> USB connection from there with your PC and flash using the CustomRUU.exe tool.
Braizy said:
Good evening all!
It seems that I may have made a mistake! Either that or my mind is to tired to think strait! Please help!
Firstly, after having several successful attempts at flashing custom roms/radios and experimenting with my device, I thought I had finally found the ROM of choice! Here's what I have done: performed a task29 run to clean up any straggling files ... normal process right!? No! I forgot the most important step to the process before totally wiping all information off my phone. I formatted my SD card without adding any type of rom to my device before running task29. I've tried running the customRUU tool from my PC and have had zero luck. My phone attempts to boot with none of the red text in the loading screen and just hangs. I can enter the bootloader screen but I still have zero luck on getting anything to work from the customruu tool.
Any information that anyone could willing provide would be greatly apprecaited!! I apologies for wasting anyones time!
Thanks in advance,
Braizy <<<< (Noob!)
Click to expand...
Click to collapse
Next time use FlashaholicRUU as it will perform task29+flash the ROM.. (won't let you proceed if you don't include an .nbh)
agupta80 said:
Dude, you should be able to hold down the volume down button before powering on the device. You should get to the bootloader screen with no issues and be able to establish an ActiveSync <--> USB connection from there with your PC and flash using the CustomRUU.exe tool.
Click to expand...
Click to collapse
That's what I thought as well ... I have my device connected via USB, looking at the bootloader screen as we speak and it's still not showing my anything under ActiveSync. I've tried installing a different Radio as well, still no change.
Here's exactly what I'm looking at on the bootloader screen:
PB81120 SS-B3
SPL-2.08.HSPL 8G XE
0X05
CotullaHSPL 0X50
USB
That's it! I can attempt to boot normal as if I were just powering on the device and I get the white "stick together" t-mobile splash screen.
Scabes24 said:
Next time use FlashaholicRUU as it will perform task29+flash the ROM.. (won't let you proceed if you don't include an .nbh)
Click to expand...
Click to collapse
I tried using FlashaholicRUU just now. I was able to perform the task29 process successfully, I held the volume down button at 100% and let the phone enter into the bootloader screen. I then continue with the on screen prompts from PC to start the ROM update process ... only for the update utility to tell me;
ERROR [240] : FILE OPEN The Update Utility can not open the requested file. Please check your update Utility.
Click to expand...
Click to collapse
Update:
I was finally able to get it flashed and operational. I found a ROM that had a customRUU packaged with the download and a good radio. I used the Utility in the package and all is working now. Not to pleased with the ROM but it's only temporary. Thanks a bunch for everyone's help and input.
Excuse me while I wipe the sweat from my forehead!
-Braizy
Greetings All,
I rooted my phone few months ago and have installed few ROM's. Sadly the one I had for sometime was a battery hog and couldnt even last for a day. I thought its time to change it and tried installing elinux and looks like I messed up my phone.
I installed elinux update.zip and it rebooted and is giving me boot loop. It just gets struck at htc screen and does not move ahead. I also dont see recovery in hboot. most of the times I cant get to hboot and when I do it shows me error message which is in the lines of no image - error . Can someone please ,please tell me what to do? of what I read online, I can install recovery image using adb..but in my case, I cant as I cant enable that usb debugging option.
please please help me...
phone : HTC hero - Asian
Thanks a ton and appreciate you reading this
My prepared answer for all such questions: Try a RUU install from PC It always works
thanks for reading my question.
Can you please tell me more about installing ruu from system. how do I do that? How can I install ruu or anythin like that when I cant connect my phone to my com[puter and change the usb debugging. I would really appreciate if you can let me know. thanks a ton
The trick is, you don't need usb debugging checked for installing ruu Booting into fastboot is enough (Power+Back).
In this case, You'll ned to download a proper official ruu for your device ASIA_HTC_HERO +verson for example, just google it). then connect usb cabel, power into fastboot wait a little for drivers, and run the ruu exe file. It will do all the work.
You just need to find the right RUU for your regional phone version.
Didnt want to mess it up without knowing what am doing. Took it to a shop and its up and running. Thanks for your help buddy.
Admins : Please delete or close this thread. Thks
Ive opened this thread coz many people are finding my tutorial usefull
so here goes and if it helps let me know and give me a thanks
Hi i was new to all this and installed dynamics v2.0 fully unlocked rom the other day and this is how i went about it
download this
RUU_Mozart_Orange_UK_1.24.061.35_Radio_5.50.09.18_22.24.50.09U
http://www8.zippyshare.com/v/48117282/file.html
this is a load your phone back to 1.24
to install it i did this
turn phone off hold down volume down and turn phone on you should go to the bootloader screen then plug in your usb cable to the pc,
then on the white line at the bottom on phone screen should say usb instead of serial but maybe it will need to install some drivers cant remember 100%
when it is ready open that file and click the RomUpdateUtility.exe and follow the steps in that then you will have your phone back to 1.24
next you can follow this post here and download the attachment at the bottom named DFT_XSPL_WP7FG1.rar this what u need for this step
http://forum.xda-developers.com/showthread.php?t=1195647
basically this is the install procedure u may need to install active sync (XP) or windows mobile device center (vista and 7) but i did not have to my phone automatically did this
DFT_RSPL_WP7FG1_LAUNCH allows you to load RSPL on the device:
1. Extract ALL files from RAR archive.
2. Run DFT_RSPL_WP7FG1_LAUNCH (with administrative rights to access USB)
3. Mindfully reads information text. Press “Next” button.
4. Reset your device and hold “Volume Down” button during reset to enter OSPL mode.
5. Connect your device to PC via USB cable.
6. Now you may need to install proper USB drivers. They come with Active Sync / Windows Mobile Device Center.
7. Install drivers if required.
8. Make sure device show “USB” at the bottom instead of “Serial”.
9. Press “Next” button in the wizard. It should detect your phone.
10. If you are using WCEUSBHS driver under Windows Vista/7 (for MTTY or MAGLDR TTY for example), you should apply “Windows XP compatible mode” in the properties of EXE file to get connection.
11. After successful connection it should show device codename and allows to choose installed OSPL version.
12. You should look at the screen and select OSPL version in drop down list box. You need do this because it’s not possible to detect installed version via USB.
If your current SPL version doesn't present in the list, you can choose nearest version,
BUT ONLY IF IT HAS SAME FIRST NUMBER!!
Example: You have 4.XX on the device. Do NOT choose 1.XX 2.XX 3.XX.
13. Press “Next”. Wait until comes final page.
14. Read and close window
15. Look at the device – it must reboot to RSPL.
16. If you see RSPLX.Y.Z and “CotullaRSPL” on the screen – the task done! Otherwise, please report in this thread about your problems.
17. Put some feedback in this thread for community and developers.
Installing HSPL
DFT_HSPL_WP7FG1_INSTALL allows you to install HSPL on the device:
1. Launch RSPL on the device like described above.
2. Be sure that you close RSPL wizard window.
3. Run DFT_HSPL_WP7FG1_INSTALL.exe (with administrative rights to access USB)
4. Mindfully reads information text. Press “Next” button.
5. Proper drivers already must be installed in RSPL step.
6. Press “Next” button in the wizard. It should detect your phone.
7. If you are using WCEUSBHS driver under Windows Vista/7 (for MTTY or MAGLDR TTY for example), you should apply “Windows XP compatible mode” in the properties of EXE file to get connection.
8. After successful connection it should show device codename and allows to choose HSPL or OSPL version to install. OSPL means you install stock SPL back.
9. Check device codename, if something wrong turn off computer and run to the nearest forest. Grab some water with yourself.
10. Press “Next”. Wait until comes final page.
11. Device will reboot and start to boot OS.
12. Reset it and enter SPL mode again. Be sure there HSPLX.Y.Z and “CotullaHSPL” appear.
13. Put some feedback in this thread for community and developers.
Now u are ready
you can find what custom rom you want i used dynamics v2.0 which can be found here and its fully unlocked aswell so all i all im pleased with it
http://forum.xda-developers.com/showthread.php?t=1520352
download it and install the same way we installed the 1.24 rom in the begining of this post
turn phone off hold down volume down and turn phone on you should go to the bootloader screen then plug in your usb cable to the pc,
then on the white line at the bottom on phone screen should say usb instead of serial
when it is ready open that file and click the RomUpdateUtility.exe and follow the steps in that and then you will have loaded your desired custom rom onto your phone
I hope this helps some of u out and happy modding
best regards
steve
1.24
Great guide thanks, my phone is network unlocked do you know if that will revert once upgraded? also you mention rolling back to 1.24 what does 1.24 mean,and how do i find out if my device is on 1.24 already? one last Question how are you finding the rom any issues with it?
cheers
Geoff
geofferz said:
Great guide thanks, my phone is network unlocked do you know if that will revert once upgraded? also you mention rolling back to 1.24 what does 1.24 mean,and how do i find out if my device is on 1.24 already? one last Question how are you finding the rom any issues with it?
cheers
Geoff
Click to expand...
Click to collapse
1.24 im refering to the SPL you can find your version by turning the phone off holding volume down and power button and u will see your SPL at the top,
im not sure about the unlocked sim/network im new to all this aswell maybe do a search on the forums and see if you can find the answer, but i dont know this 1 sorry :/
rom is good no issues had a cable issue yesterday that wouldnt let me charge my phone but thats down to my dodgy cable
you dont have to install this rom you can use any custom rom you like or might find out there
anyways hope this helps
Launch RSPL
Thanks a great help.. ok to use to add tunes via zune? last bit on installing the custom Rom, what ruu option do I choose?
Cheers
hehe the first stage 1.2 spl.. when I open the rom update it gives a error 208? the update utility cannot open the requested file? any ideas and do i have to down to 1.2?
edit..Windows Mobile Device has been installed but when I open it, its not connected!! I powered of the phone with volume down. I can see the spl and usb at the bottom and it installed usb drivers etc, Im I missing a driver?
thanks once again
geofferz said:
hehe the first stage 1.2 spl.. when I open the rom update it gives a error 208? the update utility cannot open the requested file? any ideas and do i have to down to 1.2?
edit..Windows Mobile Device has been installed but when I open it, its not connected!! I powered of the phone with volume down. I can see the spl and usb at the bottom and it installed usb drivers etc, Im I missing a driver?
thanks once again
Click to expand...
Click to collapse
hi u don't need to worry about mobile device center this never picked up my phone either until I installed the custom rom
Don't ask why I've no idea
So what's happening when you press volume down and power you are seeing the multicolored bootloader screen right?
If so I don't know why the rom won't install for you
Maybe I've heard your firmware is at .707 if so you need y cables and its harder to downgrade your sol
tell me the firmware version please and ill try help u its in settings then about then advance on your phone if I remember
Oh also do not extract the 1.24 from the .rar file run everything from there
This is why ur getting that error I think
geofferz said:
Thanks a great help.. ok to use to add tunes via zune? last bit on installing the custom Rom, what ruu option do I choose?
Cheers
Click to expand...
Click to collapse
you dont need to select a option just load ROMUpdateUtility.exe
ive just downlaoded and reinstalled the rom myself to try see what u mean and i dont get this option
when you go to bootloader screen on your phone and it says usb open the rom file and click ROMUpdateUtility.exe
now dont open active sync or mobile tools as it says on the program information
just click the tick boxes and continue through the process
maybe try download the rom again found this
ERROR [208] : FILE OPEN
ERROR [210] : FILE READ
These error messages indicate that RUU lacks certain important files and cannot continue with the update. Please get the complete RUU package again.
but like i sed i have downloaded the file myself and it is working for me without any problems
beany2009 said:
hi u don't need to worry about mobile device center this never picked up my phone either until I installed the custom rom
Don't ask why I've no idea
So what's happening when you press volume down and power you are seeing the multicolored bootloader screen right?
If so I don't know why the rom won't install for you
Maybe I've heard your firmware is at .707 if so you need y cables and its harder to downgrade your sol
tell me the firmware version please and ill try help u its in settings then about then advance on your phone if I remember
Click to expand...
Click to collapse
Thanks for the help.
My firmware is 2250.21.40600.61,hope I don't need y cables for this version..
I see the multi coloured screen, and once plugged in to my pc it says usb at the bottom..
Strangely the 1.24 rom update works sometimes and not others, can you remember when you do done it, did it tell you want version currently on? because it didn't for me, I pressed next until update screen and was on 0% for bout 6-7 mins, my phone also displayed the same, how long did it take roughly
As regards to the Dynamics rom update.exe ( I opened with no phone attached ) It says welcome to the advanced rom update utility for Htc Mozart below that are, two ruu options.. regular (this is default) and below is custom I was thinking or using logic that I don't think i have hehe.. that the custom would be the option? or leave it
I really appreciate your help on this, I have installed many custom rom on android,but this windows phone grr annoying but I wont give up.
geofferz said:
Thanks for the help.
My firmware is 2250.21.40600.61,hope I don't need y cables for this version..
I see the multi coloured screen, and once plugged in to my pc it says usb at the bottom..
Strangely the 1.24 rom update works sometimes and not others, can you remember when you do done it, did it tell you want version currently on? because it didn't for me, I pressed next until update screen and was on 0% for bout 6-7 mins, my phone also displayed the same, how long did it take roughly
As regards to the Dynamics rom update.exe ( I opened with no phone attached ) It says welcome to the advanced rom update utility for Htc Mozart below that are, two ruu options.. regular (this is default) and below is custom I was thinking or using logic that I don't think i have hehe.. that the custom would be the option? or leave it
I really appreciate your help on this, I have installed many custom rom on android,but this windows phone grr annoying but I wont give up.
Click to expand...
Click to collapse
lol np mate ill try help as best i can
right i understand your bit now about the dynamics rom u need to select regular on this part
custom i think would be if u want to edit it or some **** but i have no idea so u use regular mate because this is the actual rom file made but remember u must downgrade and load rspl and hspl onto your phone before doing this step
right my firmware is 2250.21.51301.401 but i dont know if this changes on installation of the downgrade and adding the custom rom like i sed im a complete noob with this myself but all went smoothly for me thats why i made the tutorial
and no mate my phone took about 5-10 mins to install the 1.24 orange rom
have u tried a hard reset first and then see if it helps with the installation
ill search around for your firmware and see if there has been issues
edit..........................................
did a search on the forums and your firmware comes up with nothing :/ did a google and only shows this thread did you type the numbers correctly?
also you mean that the rom update works sometimes and not others?
if it works once it should install it mate np's
When you load you phone into bootloader the multicoloured screen can you please type here what u see mainly the top letters and numbers
beany2009 said:
When you load you phone into bootloader the multicoloured screen can you please type here what u see mainly the top letters and numbers
Click to expand...
Click to collapse
again thanks for your help
ok here goes red: PD 67100 ss-BC (4k)
SPL-4.6.2250.0(129193) mng
what you think?
i think my SPL was on that before so i dont know why u are having issues mate :/
maybe wait and see if a developer can read this and give us some info on why its not working for you :/
Thanx For The Help And the Tutorial It Was very Helpfull
Now my phone Is running dynamic 2.0
hey can u tell me what other custom roms are available that i can install on my phone and if there are any different methods of installing them
no problem mate glad it helped
erm the only other custom rom i have seen on mozart is deepdishing v7.0 you can find this in the development thread inside mozart topics
and for me mate im not sure and have not seen another way of installing another custom rom but im new to all this myself
anyway glad this helpped
regards
my computer wont pick up htc 7 mozart in bootloader
can anyone help me its doing my head in .
when you connect your phone to pc in bootloader its not showing as usb on the bottom of bootloader screen?
just serial?
just to confirm. this wont work on Asian handsets.
beany2009 said:
Ive opened this thread coz many people are finding my tutorial usefull
so here goes and if it helps let me know and give me a thanks
steve
Click to expand...
Click to collapse
Thx for the easy to follow guide.
It worked on a telstra brand mozart using windows 8.
Sent from my GT-N7105 using Tapatalk 2
Hello,
I recently switched to kitkat but after flashing I realised that the stock rom has too much bloatware and was practically very annoying to use (I'm looking at you, Norton and LeSave.
Now here's my problem:
I can't flash anything anymore using flashtool, it detects my phone, loads one file, but then goes down to 0bytes/0bps and it keeps hanging there untill I get an error. I tried to get a workaround by rooting and installing TWRP it but nothing works, it refuses to root.
Can anyone help me? I don't know what I did wrong and I'm afraid I messed up my partitions or something.
I just want to go back to Jellybean with a clean rom, no bloatware, preferrably rooted.
Thanks in advance,
Biscuit
Errors I get:
''BROM ERROR: S_FT_READBACK_FAIL (4009)''
Google didn't get me any further ):
VoodooBiscuit said:
Hello,
I recently switched to kitkat but after flashing I realised that the stock rom has too much bloatware and was practically very annoying to use (I'm looking at you, Norton and LeSave.
Now here's my problem:
I can't flash anything anymore using flashtool, it detects my phone, loads one file, but then goes down to 0bytes/0bps and it keeps hanging there untill I get an error. I tried to get a workaround by rooting and installing TWRP it but nothing works, it refuses to root.
Can anyone help me? I don't know what I did wrong and I'm afraid I messed up my partitions or something.
I just want to go back to Jellybean with a clean rom, no bloatware, preferrably rooted.
Thanks in advance,
Biscuit
Errors I get:
''BROM ERROR: S_FT_READBACK_FAIL (4009)''
Google didn't get me any further ):
Click to expand...
Click to collapse
You messed up everything!
Hmmm... you need a custom firmware if you want something light !
Like life 0.7 !
If you want a custom made firmware fot the chinese base but without bloatware and rooted you can try Baralajbi firmware.
Good Luck.
stympy said:
You messed up everything!
Hmmm... you need a custom firmware if you want something light !
Like life 0.7 !
If you want a custom made firmware fot the chinese base but without bloatware and rooted you can try Baralajbi firmware.
Good Luck.
Click to expand...
Click to collapse
I have the same exact problem...
I am trying to flash Baralajbi firmware but it goes down to 0bytes/0bps and it keeps hanging there until I get an error.
How can we flash anything (as you advice) if Flash tools do not work?
Partitions are really messed up. In the recovery menu ("No command" screen with dead android ) I am trying the "apply update from sdcard" option , and it redirects me to the internal memory!
Chinese phone , tried P780_ROW_S228 rom but it is laggy and cellural reception is poor ! Gps malfunctioning also...
katsanos said:
I have the same exact problem...
I am trying to flash Baralajbi firmware but it goes down to 0bytes/0bps and it keeps hanging there until I get an error.
How can we flash anything (as you advice) if Flash tools do not work?
Partitions are really messed up. In the recovery menu ("No command" screen with dead android ) I am trying the "apply update from sdcard" option , and it redirects me to the internal memory!
Chinese phone , tried P780_ROW_S228 rom but it is laggy and cellural reception is poor ! Gps malfunctioning also...
Click to expand...
Click to collapse
Hi. Try this. Retry to flash but this time when flash tool do nothing, open the back cover of your phone and keep the red button pressed for 20 seconds. When you release the button flashing process should start.
Tell me if not.
If not... Reinstall the drivers... and repeat the flashing process.
Sent from my Lenovo P780
stympy said:
Hi. Try this. Retry to flash but this time when flash tool do nothing, open the back cover of your phone and keep the red button pressed for 20 seconds. When you release the button flashing process should start.
Tell me if not.
If not... Reinstall the drivers... and repeat the flashing process.
Sent from my Lenovo P780
Click to expand...
Click to collapse
it didn t work.
The moment i press the reset (red) button ,the classic Flash Tools errors appears . The same as before
When you say "reinstall the drivers" what do you mean?
is it the proccess described here? http://forum.xda-developers.com/lenovo-p780/development/rom-lenovo-p780-pre-rooted-official-t2553725
satanduck said:
Open "Device Manager" on your Windows PC.
Plug in your phone through the micro USB cable. A device will show up for a few seconds in "Device Manager". After that, it will disappear again!
Recognize the device tree where it appeared, and wait for it as you unplug and plug in your phone again (if bootloop, its automatic!)
Catch it with a right click as it appears! Then choose "Update Drivers" and pick the directory where you uncompressed the drivers you downloaded above. Its ok if after catching it the device disconnects. You only need to install the drivers now.
Assuming the drivers are correctly installed, run the Smart Phone Flash Tool.
Click to expand...
Click to collapse
katsanos said:
it didn t work.
The moment i press the reset (red) button ,the classic Flash Tools errors appears . The same as before
When you say "reinstall the drivers" what do you mean?
is it the proccess described here? http://forum.xda-developers.com/lenovo-p780/development/rom-lenovo-p780-pre-rooted-official-t2553725
Click to expand...
Click to collapse
Nope
Tutorial and drivers here.
Scroll down to my seccond post.
stympy said:
Nope
Tutorial and drivers here.
Scroll down to my seccond post.
Click to expand...
Click to collapse
Thanks for all your answers. I think its great that you are helping all those people,like me with our stubborn devices!
Tried what you proposed,but No, it didn t work either. Even tried installing the MTK drivers from scratch to an other "clean" laptop, on which i had never before connected my p780... No luck there either. Still Flash Tools refuse to do anything
katsanos said:
Thanks for all your answers. I think its great that you are helping all those people,like me with our stubborn devices!
Tried what you proposed,but No, it didn t work either. Even tried installing the MTK drivers from scratch to an other "clean" laptop, on which i had never before connected my p780... No luck there either. Still Flash Tools refuse to do anything
Click to expand...
Click to collapse
do you have time for a team viewer sesion ?
Yes, of course . I am sending you a pm
Sent from my SM-T310 using Tapatalk
stympy said:
do you have time for a team viewer sesion ?
Click to expand...
Click to collapse
thanks for everything ! :good::good:
everything seems allright now
katsanos said:
thanks for everything ! :good::good:
everything seems allright now
Click to expand...
Click to collapse
You are wellcome!
heres wha i have done and my problem, sure hope theres some help an i havent broken it. Since FuHu has removed the updates i decided to give it a whir myself. I read and read on the nabi and differant ways to update, but none worked. Somehow i deleted the OS, but i figured no problem and found the xda site for the nabi stuff. I was able to install twrp 2.2.2, it wouldnt read the micros sd card, i up graded the twro to 2.8 version, everythig semed to work except the deggone "slide button" id recon youd call it. Back to the drawing board. I down loaded twrp 2.6 for the nabi and installed. Have no idea what went wrong, but now, i fire up the nabi, go into recovery kernal ( without being plugged into the pc ) it just sits there, when i plug the usb cable into nabi then the laptop, it automaticall connects to the driver, and goes to a screen that has,,
bootloader
continue
reboot-bootloader
reboot
power off
now if i press the vol - again it goes to a screen....
boot normally
fastboot protocol
recovery kernal
forced recovery
it just keep fliping back and forth betwen thos 2 screens,it shows connected on my laptop,but try to load anything and it says no device connected..
Truley baffeled,, any help is appreciated
Thank you
Rascle
did you still need help with this i can help you if so i just went through this
buksh0t80.. .. .. yes please, i havent done anything with it for quite some time other than think of using it for target practice
buksh0t80 said:
did you still need help with this i can help you if so i just went through this
Click to expand...
Click to collapse
...
buksh0t80.. .. .. yes please, i havent done anything with it for quite some time other than think of using it for target practice
I just went through the same thing and this helped me fix mine from not even powering on .. go to bootloader where fastboot is in menu and go to forced recovery and download the NABI2RESIZE.zip from https://forum.xda-developers.com/showthread.php?t=2101277&page=13
and follow those instructions in that post make sure you have apx drivers installed .. let me know if you have problems downloading i will upload the files i have used for you to dl but it should fix it .. if not let me know i have become a nabi brick unbrick expert over the last year lmao
i am pretty sure you shouldn't have any problems .. make sure bootloader is unlocked
let me know if you need help i will chat with you somewhere and walk you through it .
buksh0t80 said:
I just went through the same thing and this helped me fix mine from not even powering on .. go to bootloader where fastboot is in menu and go to forced recovery and download the NABI2RESIZE.zip from https://forum.xda-developers.com/showthread.php?t=2101277&page=13
and follow those instructions in that post make sure you have apx drivers installed .. let me know if you have problems downloading i will upload the files i have used for you to dl but it should fix it .. if not let me know i have become a nabi brick unbrick expert over the last year lmao
i am pretty sure you shouldn't have any problems .. make sure bootloader is unlocked
let me know if you need help i will chat with you somewhere and walk you through it .
Click to expand...
Click to collapse
you must have the patience of a cat, i tried for 30 minutes to get to the download, all i got was a page wanting to know if i was a robot and a car page.
Rascle53 said:
you must have the patience of a cat, i tried for 30 minutes to get to the download, all i got was a page wanting to know if i was a robot and a car page.
Click to expand...
Click to collapse
Ok i got the file downloaded today, wont be able to do anything with it untill Monday, we have the grandkids this weekend. Thank you for all your help, will get back to you to let you know how things went.
ok
buksh0t80;
UPDATE...... got the file down loaded an have been trying to use it, however now im fighting driver problems, i was using a samsung driver for it in the past, but now its no recognizing it in usb,says it cannot be found. tried installing pdanet,but same thing. I have a nabi2 that is working, and it wont recognize it either. ive tried 4 differant laptops with windows 7 and one with win 10. So id recoin the update part is im searching for driver that will work