I have HTC hero (bought in india).
i had updated it 2.1 using OTA updates.
Recently i rooted the devices using one touch and had installed Rom manager to put a recovery image of cynagoenmod recovery image.
and later when i tried to update the lock screen of vanilla using update method of recovery mode i happened to crash my Hero.
I have tried the following to get it working but all have failed.
1. Put the HEROIMG.zip on sdcard and try the HBOOT method. - failed.
2. tried the fastboot method using recovery image but got the no remote found error
3. using RUU RUU_Hero_HTC_WWE_2.73.405.66_WWE_test_signed_NoDriver which says USB connection errror.
now i need some help to get my Hero working. any help would be appreciated..please help me get this working..
Have you got the correct drivers for seeing the device in fastboot?
And same applies for RUU. ruu needs the htc sync drivers iirc
Have you gone back into your recovery and restored the nandroid backup? (which everyone should be making before doing anything to their system)
Assuming you haven't done this - couldn't you just go back into recovery - turn on the usb-ms setting and place a rooted update zip of which ever rom you want onto the sd card and flash that instead. You can even get official ones with root enabled (though i can't remember where I saw them).
Alternatively pulsar's method will also work - get the correct HTC Sync drivers installed (by installing the latest version) and you'll have the right drivers in fastboot mode so the rru should install.
1st thank you for ur response Pulsar and btdag.
My device shows in fastboot.
I have also have HTC sync installed.
but since my phone doesnt boot up i tried using the RUU with the phone in fastboot.
this give me USB connection error.
Then i disabled the firewall of windows 7, still no help.
Please let me know if i am doing anything wrong here..
another point , i had done backup when my phone was going in recovery mode.
but now when i try the home and power key devices stucks on exclamation ! screen which prompted me to go for RUU.
i havent done any goldcard backup as suggested in ur complete step by step guide.
If i put the update.zip on my sdcard i would need to be in recovery mode for installing that rt?
Also to mention the HBOOT mode doesnt recognize any zip...
Hi,
I traded a phone with someone and the rom they had was acting up.. the Infected Rom (cdma verizon)... When I got the phone, I told him he could keep his SD card and I could keep mine.. i guess the P something image file was on there and now Im just rooted with Teamwin recovery and not able to flash any rom or restore the Infected rom i nandroid backed up.
I have fastboot 1.50 S On but unlocked
Now imma be at work and not have a working phone. This isn't cool. PLEASE GET BACK TO ME IF YOU CAN HELP peeps. I would really appreciate it.
I also tried the unlocking method all over again but the Java SDK wont install.. it tells me to disable my virus protection (I did) and then it says unable to install it. This is just a mess man.
stepinmyworld said:
Hi,
I traded a phone with someone and the rom they had was acting up.. the Infected Rom (cdma verizon)... When I got the phone, I told him he could keep his SD card and I could keep mine.. i guess the P something image file was on there and now Im just rooted with Teamwin recovery and not able to flash any rom or restore the Infected rom i nandroid backed up.
I have fastboot 1.50 S On but unlocked
Now imma be at work and not have a working phone. This isn't cool. PLEASE GET BACK TO ME IF YOU CAN HELP peeps. I would really appreciate it.
I also tried the unlocking method all over again but the Java SDK wont install.. it tells me to disable my virus protection (I did) and then it says unable to install it. This is just a mess man.
Click to expand...
Click to collapse
If you're interested in reverting back to completely stock, the RUU files are available at http://www.goo-inside.me/shooter/ruu . Both the PG86IMG.zip and the .exe files are available there.
Interesting the device is flashed to verizon, at least you mention the device is on CDMA verizon. The only issues I can forsee here will be 3G data/MMS might not work via Verizon if using a stock Sprint ROM.
Of course, these *might* work and they can also be *tweaked* but I doubt, out of the box, they will work. Phone calls and SMS should work over verizon using the stock sprint ROM.
Here is my usual lecture, reading this will save you a lot of time and headache, regarding flashing a ROM and kernels on the EVO 3D with hboot 1.5 and htc's unlock method:
Essentially, if you're looking to flash a kernel or ROM (which many times also include a kernel), there are three basic methods (two seem the easier) with hboot 1.50 and htc's unlock method:
1) For Kernel Flashing: From Android mode, using my application, Flash Image GUI. Put the kernel .zip file on your sdcard, select from inside the application and flash.
For ROM Flashing: Pull out the kernel file (usually named boot.img) out of the ROM .zip and push to sdcard. Flash using Flash Image GUI.
If you're away from a computer and want to flash any kernel, this is a great tool!
2) Load the custom recovery, NOT using the traditional method (reboot recovery, bootloader -> recovery, etc), but a specific method for Hboot 1.5. From the prompt use: fastboot boot c:\downloads\cwm-recovery.img.
This will temporarily boot the custom recovery image and the HTC unlock method will grant it write access to the boot partition while in this mode.
In this temporarily booted recovery mode, when a full ROM (with kernel included) is flashed, the kernel will flash correctly.
3) Boot into recovery using the traditional methods, reboot recovery, bootloader -> recovery, etc, and after the custom recovery has loaded, flash the ROM. Reboot into fastboot mode and then separately flash the kernel from the computer: fastboot flash boot c:\boot.img.
Downside to this method would be if a zImage is included instead of the boot.img for the kernel, won't flash correctly.
Being without a phone is rough now a days! Hope that helps and points in the right direction!
so sorry.. i meant to say CDMA Sprint.. i probably was so frustrated and typed verizon. I am about to read what you post completly.
Thank you so much for the reply! I purchased the GUI App from the market a few days ago and I wasnt sure if it would work on my phone because that PG86IMG.zip wasn't on the root of my SD card (it's on the other guy's sd card) I will try your method to flash a ROM.
I was able to get the Rom restored from the nandroid backup someone last night.. I still need a new rom because this one has touch screen problems. Thanks again
Hi.
While trying to upgrade my tablet to a later version of Android, something borked the bootloader. The tablet boots fine to a bare ICS (no gapps, but ROM MANAGER installed, though it does nothing but hang), but trying to boot into recovery mode hangs it (black screen with android robot, OEM info).
I can install apks to the tablet. I have installed ADB on my PC and it sees my tablet.
Where do I go from here ?
I have no clue
- what exact file(s) I need (my tablet is an Ainol novo8 advanced)
- where I need to put them
- what the commands are to do that
- it should be rooted (the superuser app aloows me to grant su privileges to apps)
Any help that can bring my tablet back to life would be very welcome.
Olivier
obarthelemy said:
Hi.
While trying to upgrade my tablet to a later version of Android, something borked the bootloader. The tablet boots fine to a bare ICS (no gapps, but ROM MANAGER installed, though it does nothing but hang), but trying to boot into recovery mode hangs it (black screen with android robot, OEM info).
I can install apks to the tablet. I have installed ADB on my PC and it sees my tablet.
Where do I go from here ?
I have no clue
- what exact file(s) I need (my tablet is an Ainol novo8 advanced)
- where I need to put them
- what the commands are to do that
- it should be rooted (the superuser app aloows me to grant su privileges to apps)
Any help that can bring my tablet back to life would be very welcome.
Olivier
Click to expand...
Click to collapse
If you can still use ADB your tablets bootloader is likely not messed up, it sounds like you booted the tablet into fastboot mode not recovery. To get into recovery you can enter it by holding a key combination the most common combination is holding volume up plus the power button at the same time. If that doesn't work from ADB you should be able to get into recovery by running the command:
Code:
adb reboot recovery
Also ROM manger doesn't always work right with every device so I would recommend just uninstalling ROM Manager for now. If it is booting fine into bare ICS then your tablet should be ok, if your looking for Google Apps for ICS they can be found here http://cmw.22aaf3.com/gapps/gapps-ics-20120317-signed.zip. Let me know if you still have questions .
Sent from my SCH-I535 using xda premium
Thanks a lot for your answer.
I'm sorry I didn't describe the issue well: I can no longer access the recovery mode.
I used to get to it by cold-booting the tablet holding Vol+ and Power. I used that to install ICS, gaps, powertools and 3D tools as described in http://forum.xda-developers.com/showthread.php?p=36059461#post36059461. The first package (recovery CWM) failed to installed because it was unsigned), the others installed, but in the end it seems I only got ICS: I have no gapps.
Now doing Vol+ and Power only gets me to the boot screen (a green android with OEM info, on a black background). Your "adb reboot recovery" does the same. I can only exit that screen by a hard reset.
During a normal boot, that screen flashes by for a couple of thesconds, then another, then the ICS colorful boot animation.
I have no clue how the recovery boot process works. I'm guessing it's reading a file of the internal Flash, and that file or dependencies got corrupted or partly overwritten by one of the packages I installed ? I'm not even sure if CWM recovery replaces the default recovery mode, or if it chains right after it ? I do have a supposedly-working CWM recovery .zip from the authors of the CM10 hack, as well as the "original" files listed here: http://forum.xda-developers.com/showpost.php?p=31089682&postcount=286 (official images from an out-of-the-box, unhacked tablet).
PS: the recovery mode I used to have was very rustic, only taking "update.zip" as an input, so when I did the update I had to go back and forth renaming the first package to "update.zip", applying it, renaming it "update1.zip, then on the the second package, etc, etc... It said Android System Recovery (3e), so maybe 3e was the version.
last but not least, if I could at least get the gapps onto the tablet, even w/o fixing the recovery mode, it would be very useful. I can install apks, or follow instructions to do it via adb ?
obarthelemy said:
Thanks a lot for your answer.
I'm sorry I didn't describe the issue well: I can no longer access the recovery mode.
I used to get to it by cold-booting the tablet holding Vol+ and Power. I used that to install ICS, gaps, powertools and 3D tools as described in http://forum.xda-developers.com/showthread.php?p=36059461#post36059461. The first package (recovery CWM) failed to installed because it was unsigned), the others installed, but in the end it seems I only got ICS: I have no gapps.
Now doing Vol+ and Power only gets me to the boot screen (a green android with OEM info, on a black background). Your "adb reboot recovery" does the same. I can only exit that screen by a hard reset.
During a normal boot, that screen flashes by for a couple of thesconds, then another, then the ICS colorful boot animation.
I have no clue how the recovery boot process works. I'm guessing it's reading a file of the internal Flash, and that file or dependencies got corrupted or partly overwritten by one of the packages I installed ? I'm not even sure if CWM recovery replaces the default recovery mode, or if it chains right after it ? I do have a supposedly-working CWM recovery .zip from the authors of the CM10 hack, as well as the "original" files listed here: http://forum.xda-developers.com/showpost.php?p=31089682&postcount=286 (official images from an out-of-the-box, unhacked tablet).
Click to expand...
Click to collapse
obarthelemy said:
PS: the recovery mode I used to have was very rustic, only taking "update.zip" as an input, so when I did the update I had to go back and forth renaming the first package to "update.zip", applying it, renaming it "update1.zip, then on the the second package, etc, etc... It said Android System Recovery (3e), so maybe 3e was the version.
Click to expand...
Click to collapse
obarthelemy said:
last but not least, if I could at least get the gapps onto the tablet, even w/o fixing the recovery mode, it would be very useful. I can install apks, or follow instructions to do it via adb ?
Click to expand...
Click to collapse
The recovery you are referring to is to the standard Android 3e recovery it is included in every version of Android, and will always be like that unless you install a custom recovery such as CWMR and or TWRP. As a general rule you should never install a custom ROM without having a custom recovery image installed first, essentially all the stock 3e recovery is good for is installing OTA updates and preforming a basic factory reset of your phone. You should try and fix your recovery before going any-further, you can sign the un-signed zip by using this tool. Overall, I would focus on trying to fix the recovery to prevent any further damage to your tablet and so that way you have a simple way to recover from anything that might go wrong when flashing ROMs, mods, and other zip files.
issue with the uImage linked
The uImage linked on the download pages for the CM10 and CM9 version ends in ".*"
I have no clue what the normal extension should be; replacing that *.zip doesn't work. Is the file bad, or am I just too clueless about what to do with it ?
Ok so the question is:
1- which "recovery mode" file should I install on my tablet, especially since the mod author's ones seem flaky
2- how do I do that via ADB since my tablet no longer seems to have a working "recovery mode".
I'm sorry to hassle you with those questions... I've looked around, I can't find info nor files I'm confident about ?
So, I've stupidly let my son try and flash a custom rom on his generic chinese tablet (Cambridge Sciences StarPAD 9 SE) and he found a few very similar spec tablet roms on the internet which said they require TWRP to be installed before flashing. So he's installed that, rebooted into recovery but the TWRP doesn't fit the screen in terms of resolution size. Now, that's not the main problem. The main problem is that the touch screen doesn't work at all within TWRP so I can't select any of the options. Whenever I power off the device and power it back up, it reboots to TWRP and doesn't boot to the main ROM. He said that it did originally reboot to the ROM whenever he first installed the TWRP because he said that it was the only way of getting to the recovery. So I thought that I could just use ADB and just force a reboot from there but off course, there is no ADB device driver to be found on the internet.. well not that I can find anyway.
I'll attach a photo for you guys and hopefully someone can help me with this as I've spent the best part of 2 days trying to figure out a fix but am now stuck.
I'm now able to access the device by adb however I don't know what to do from there.
Any help?
Does anyone have any firmware for this device? I can't find anything on the internet at all. If I could get a firmware img then the device will be fixed.
The build number from the firmware is: fiber_evb-eng 4.1.1 master 20130530
the command is "adb reboot" AFAIK
Did he take a nandroid backup before flashing? It looks like a version of twrp that is not compatible with the tablet was installed. Not every device supports touch screen recovery mode. Can you use the volume rocker to navigate?
I can almost guarantee you won't find the firmware for a Chinese tablet. I've just been trying to help someone in a similar situation but the best we could manage was a ROM that had lots of glitches.
Edit how did he flash TWRP if it was incorrectly flashed ie: fastboot flash boot recovery.img instead of fastboot flash recovery recovery.img then that may produce a device that would boot straight into TWRP. I've heard of that happening on a nexus 7
Sent from my C5303 using xda app-developers app
I have an HTC desire 610 and as I was trying to flash the TWRP custom recovery I flashed the recovery image and now it keeps telling me entering recovery each time I boot. I accidentally also flashed the custom recovery to the boot image which makes it impossible to reboot the phone. I don't know what to do and the phone has been rendered useless
Any answer will suffice thank you
Hi!
I was helping a friend with this exact same issue just now, we found that according to a post on this forum, TWRP 3.1 doesn't work.
We tried TWRP 3.0 (https://dl.twrp.me/a3ul/twrp-3.0.2-0-a3ul.img) and it worked fine. Maybe that would work for you?
The post citing 3.1 not working: https://forum.xda-developers.com/showpost.php?p=71672887&postcount=16
That didn't work
I don't know how to do that as it won't boot but thanks for the advice. Any idea if I can do it with a computer?