Related
is there anyway i can g4 unlock on Vista?
yes please i want to know the answer i can`t even use shelltool "this is a custom rom " can any one help please
elhamy said:
yes please i want to know the answer i can`t even use shelltool "this is a custom rom " can any one help please
Click to expand...
Click to collapse
Have you tried this yet? [solution] G4 SoftSPL Flash any ROM to CID locked G4 [UPDATED]
You should be able to use SoftSPL with Vista without much of a problem HOWEVER, it is reccomended you use a computer with XP because should the update fail, Vista cannot communicate with the phone in tri-color mode(bootloader).
it says
it says will not work on vista...
I do not know what ancient version of shelltools you use or what strange ROM you try to flash... I used shelltools multiple times without problems (faria real thing, crossbow reloaded, pandora. xda mobile, wrcx. tnt and others, sometimes in several versions). All these were custom WM6 ROMs.
Mirek
yea
i have been using shell tool for the pass couple of months im tired of the precautions taken with it and if gives you headaches when you reflash
I do this when using shelltools:
1. I flash my provider's ROM
2. I use the CAB files acccompanying shelltools (cert...cab, enablerapi.cab)
3. I restart Wizard
4. Again point 2.
5. I flash the ROM I want with shelltools
6. If the ST do not end, I cut it after 30 minutes (all will be ok)
If anything goes wrong (it happened only once) I flash my providrer's ROM and repeat.
As far as I understand it is *impossible* to brick the Wizard with shelltools. So complete safety.
Mirek
i tried shelltool on a xp machine and im still getting custom rom error any help will be appreciated please
No idea. Maybe try to get another version of shelltools... Maybe the one you use is wrong...
And what ROM do you try to flash?
Mirek
after ur post i downloaded shell tool from another location and im still getting the same comment i even tried another rom "wizard love "
The picture is ok, I guess you misunderstood how the ST works...
a) Press "Extract OS".
b) After the OS is extracted, the button "Flash OS" will be allowed. Press it.
c) Then it will flash.
Mirek
mirekluza thanks alot man im officially now on WM6 "tnt 5 "
NOTE : for every one using windows VISTA when u click flash OS the app will be "waiting for response " Don`t panic just wait for 45 min and unplug the usb and make a hard reset it will work fine after the rest
theres many roms you can flash...all you have to do is just be patient and not to get eiger while flashing alot of people misunderstand when you enableRapi Reboot your Phone.
i just flashed a new rom just follow the basic intructions given plz dont leave the detail parts out
Using Shelltool on Vista
As mentioned previously, when you run Shelltool on Vista it generally won't ever return and tell you it's finished! However, you can actually tell when it's done for sure, rather than just waiting a certain amount of time.
When you're ready to start Shelltool, that is, you've enabled RAPI, rebooted your Wizard, and connected it to your system, open File Explorer on your desktop at the top level ("Computer") and open Pocket_PC (or whatever you've named your Wizard). Go to the root folder of the Wizard and just leave the Explorer window open. (Note: you have to have the explorer window open BEFORE you start to flash, or you won't be able to open your Pocket_PC folders.)
Start Shelltool as instructed and start the flash process. Now go back to the explorer window and refresh it. You'll see a file called "itsutils.log" in the top level folder of the Wizard. Open the file, and you'll see the detailed logging of each block that Shelltool writes. The logging for each block is five or six lines long (I don't have an example right now.) Regardless, the OS is 0x38e0000 (hexadecimal) blocks long. When the log file reaches block 38e0000 it starts spewing error messages with that block number over and over again. (Note: you have to close the file and reopen it to get it to update. So, it it's not yet reached block 38e0000, just close it and wait a little longer.)
When it starts doing that, the flashing process is done!
It seems that, at least on Vista, Shelltool is not looking for the end of the data file correctly, so it tries to write block 38e0000 over and over again, but, since there is no block 38e0000, it just logs an error message.
At this point, if you disconnect the USB cable, Shelltool will THEN issue an "end" message. Hard reset as instructed.
I should point out that one of the problems with Shelltool is that you can ONLY flash the OS, not the extended ROM, radio, splash screen, etc. That makes it sorta limiting.
Im having some issues with my x10i that i put Nordic 2.1 on a few weeks ago.
Some apps fail to open every now and then, and the stock android alarm doesnt work (the app seems fine, but when the alarm goes off there is no noise, yes ive tried volume etc, yes ive tried downloading a 3rd party alarm)
So id like to put a fresh 2.1 rom on, ive tried these:
http://forum.xda-developers.com/showthread.php?t=825675
http://forum.xda-developers.com/showthread.php?t=827065
But i cant get them to work, the .bat files of the flasher fail at the connection stage (2nd step after selecting windows vr)
Im having a lot of problems,, main one is that i cant install the driver for the x10 in flash mode, windows cant find the driver.
If anyone could kindly tell me exactly what i have to do, starting from connecting the x10 to a virgin win xp (no drivers installed for the x10), id be happy to donate $20USD into your paypal account
Ok let me see if I can help you a title here....
1. Root your device using this http://forum.xda-developers.com/attachment.php?attachmentid=453551&d=1291188836 its really simple and fast...
2. Once you've root your device use this application http://www.mediafire.com/?ewf9e41ybw2eazz
to install the Xrecovery menu on your phone... It's very simple as well....
3. Download this file http://hotfile.com/dl/87564842/7e80127/SE_update-shipped-full.zip.html
and save it to your SD Card into any folder you want, I recommend you to do it in a new one with any name you want, that will make easier the next step...
4. Reboot your phone and right after the white letters with Sony Ericsson logo appear press the back key a few times , if the Xrecovery menu has been installed correctly you will see a weird image of and Android with troll face lol... and a bunch of options like reboot, install update zip etc....
5. Choose Install Custom Zip and then go to the folder you created with the downloaded zip file... from step 3... Then select it and click in yes... Wait for a few minutes and when the phone tells you done click on reboot and wait for the firmware to load...
6. Enjoy the SE 2.1 firmware with JIT enabled.
7. Read your inbox...
Jimmy
Sent from my AOSP on Xperia (Guatemala)
Siddy1200 said:
If anyone could kindly tell me exactly what i have to do, starting from connecting the x10 to a virgin win xp (no drivers installed for the x10)
Click to expand...
Click to collapse
Put XP in safemode, run seus, put phone in flashmode when prompted so it installs the drivers, try the flashtool again, while in safemode on XP.
Or if you'd rather go for something simpler.. try rooting (if you haven't already) then follow this - http://forum.xda-developers.com/showthread.php?t=828163 to flash to global generic.
i cant even get the phone to tunr on atm, but if i get it to work ill send $20 ur way jimbo, thanks everyone
jimbo, actually your links are broken so i cant follow your guide cause u just say "use this application" - but link is down
ok, i found a new link for that one, but i cant install it cause when i connect my phone to the pc, it just starts charging, it wont mount the sd??
"If anyone could kindly tell me exactly what i have to do, starting from connecting the x10 to a virgin win xp..."
ok i put xrecovery on the sd card through a pc, installed the app and ran the app, clicked Install Xrevovery, error
already have root access, xreovery was granted superuser, but doesnt work
tried the new root app just in case, it just switched off my phone... none of this works
does anyone live in Sydney and can do it for me????
Have you installed BusyBox too?
Hi, everyone I just joined this forum. I have X10i with firmware 2.1. While searching the thread i came acrosss terms like root, xrecovery, flashing, MT, generic etc. Can someone help me out what these terms mean. I wanted to upgrade my phone to gingerbread. Previously I am an iphone user So i am total noob to this OS and the phone
Thanks in advance
good get away from iphone
root--same thing as jailbreak
xrecovery-- a badass tool that lets you flash roms onto your phone.
flashing-- umm... it is like installing a modified version of even the legit version on the device
generic-- A product having no brand name or registered trademark
example= for device there is branded or non branded
branded means that a company like ATT or Rogers approves that firmware or OS version. So when you turn your phone on, you will usually see something related to them. like an animation of the att world
generic--- clean install. no company restrictions. just regular
ok links for all that crap above
2.3.3 firmware (does not matter if you download x10a or x10i)
Generic-----
http://forum.xda-developers.com/showthread.php?t=936733
do yourself a favor and read
http://forum.xda-developers.com/showthread.php?t=936733 before and download the program WINDOWS only
Thanks for your help. I am going to upgrade my phone soon so is their any problem in doing so and by the way should i just use the SEUS or flash tool
angel eyes said:
Thanks for your help. I am going to upgrade my phone soon so is their any problem in doing so and by the way should i just use the SEUS or flash tool
Click to expand...
Click to collapse
Either will do.
ok thanks for the advice going for the upgrade now lets hope everything goes smoothly will post the results
Now this is the end result of upgrading my phone I used SEUS to upgrade my X10i the phone went into flash mode and the SEUS detect that new software is available soit downloads it but when it comes to installing it stopped at about 15% and said that updATE cannot continue check battary is fully charged and than again try. As far is i remember phone was fully charged when i put it for update now what should i do. The phone doesnt restarts now and when I power up my phone only th egreen led blinks and it vibrates for split second than nothing I waited for it but the phone is not responding what should i do now
HELP NEEDED
to tell you the truth i dont know what SEUS is
i think it is for drivers or something but you should use PC comapanion for drivers
ok
use flashtool in the first link i gave you and download one of the 2.3.3 files
or use a 2.3.3 rom
and flash the sucker on
it should work
Try flashtool if doesn't work let your phone on charge for 1 hour and take it off try again whit seus should be good to go
Sent from my X10i using xda premium
Thanks for the help guys now i have downlaoded flashtool 0.2.8, 2.9,3.0 i also downloaded the firmware and did all the steps according to the toturiol but that what happens it detect the phone in flash mode the flashing starts but at fato1.sin it gives as error message "error flashing abort". I also tried other firmwares but the same error.
Now guys I think I am great trouble so need help
What to do next
And I used the desktop charger to charge the battery for whole two houra but SEUS gives the same error plus pc companion gives error as well i am stuck
Go to pc application manager, close seus and pc companion. Try flashtool tool once again http://forum.xda-developers.com/showthread.php?t=928343. I hope this work for you.
Sent from my SO-01C using Tapatalk
Ok i will try that one too thanks alot lets see wat happens
ok tried that too nu luck
What should i Do now One thing more i was goignaround the threads looking for solution So in one thread it said that firmware can ber installed through flash tool 0.2.5
I tried that too and amazingly the flashing goes all the way to the end on 0.2.5 in the end i get the msg that flashing complete and remove the phone but when i remove the phone and turn it on it just vibrates and small blip of green flash led than nothing
What could be the problem
1. Download Flashtool from
http://doomlord.sylvester20007.com/x10/x10_gb/FlashTool_0.2.9.1-GBready_root_xRec.exe
2. Download the generic 2.3 ROM of your choice
http://forum.xda-developers.com/showpost.php?p=11038646&postcount=1
Personally I would get the Global version unless you can find your country specific one.
Global version download - http://www.multiupload.com/JEXUAHAZTL
3.
a) connect your phone to your PC, make sure it installs the drivers (if your Sony software is working it is fine)
b) Extract Flashtool into a directory you know
c) Extract the firmware file you downloaded. And move the ftf file into the "firmware" directory of Flashtool
d) Make sure your phone is not connected to the PC and is off.
e) Run Flashtool, click on Flash and select the firmware you have just downloaded.
f) It will give you the same instruction - holding the "back" key, (phone still off) connect it to the PC. If you did this correctly, the light will be green and it will start flashing your phone.
g) After it is completed, reboot your phone once or twice and check that it is working.
4. Installing xrecovery and rooting refer to instructions (you already have all the files from when you download in step 1)
http://forum.xda-developers.com/showthread.php?t=1196808
Let me know when you have completed the steps above.
Thanks for advice downloading it now and going to try and will let now about the results
sasukewa said:
1. Download Flashtool from
http://doomlord.sylvester20007.com/x10/x10_gb/FlashTool_0.2.9.1-GBready_root_xRec.exe
2. Download the generic 2.3 ROM of your choice
http://forum.xda-developers.com/showpost.php?p=11038646&postcount=1
Personally I would get the Global version unless you can find your country specific one.
Global version download - http://www.multiupload.com/JEXUAHAZTL
3.
a) connect your phone to your PC, make sure it installs the drivers (if your Sony software is working it is fine)
b) Extract Flashtool into a directory you know
c) Extract the firmware file you downloaded. And move the ftf file into the "firmware" directory of Flashtool
d) Make sure your phone is not connected to the PC and is off.
e) Run Flashtool, click on Flash and select the firmware you have just downloaded.
f) It will give you the same instruction - holding the "back" key, (phone still off) connect it to the PC. If you did this correctly, the light will be green and it will start flashing your phone.
g) After it is completed, reboot your phone once or twice and check that it is working.
4. Installing xrecovery and rooting refer to instructions (you already have all the files from when you download in step 1)
http://forum.xda-developers.com/showthread.php?t=1196808
Let me know when you have completed the steps above.
Click to expand...
Click to collapse
I have done it as adviced but no luck flashing aborts in the middle and giving error message now wehat should i do
Do you have the new flash tool?
angel eyes said:
I have done it as adviced but no luck flashing aborts in the middle and giving error message now wehat should i do
Click to expand...
Click to collapse
Can u do a screen shot or tell us what the error message is?
Thx.
Dark Nightmare said:
Do you have the new flash tool?
Click to expand...
Click to collapse
I have flash tool 0.2.5,0.2.8,0.2.9,0.3.0
Have tried them all only 0.2.5 goes all the way to the end but when i turn on the phone it only virbrates and green led flashes for sec than nothing
When you reboot is there anything showing on the screen? Sony logo...anything? If yes, wait it can take a long time for a new rom to install. If no, I think you need to revert back to the 2.1 rom, root and install busybox, superuser, and xrecovery. once thats done you can backup your rom and data so you don't get stuck updating or if you have trouble with a custom rom etc. Also I think your battery stats should be wiped using xrecovery, it sounds like SEUS checked this and the file said your battery was too low to continue the update. Here is a good place to start.
http://forum.xda-developers.com/showthread.php?t=928343&highlight=flashtool+for+noobs
Here is a video on youtube that may help too:http://www.youtube.com/watch?v=HmX-IYNYqL8
Hope this helps you, Good Luck.
angel eyes said:
I have flash tool 0.2.5,0.2.8,0.2.9,0.3.0
Have tried them all only 0.2.5 goes all the way to the end but when i turn on the phone it only virbrates and green led flashes for sec than nothing
Click to expand...
Click to collapse
Try taking the battery out and then try flashing again. Which ftf file are you flashing or selecting in the flash program. You need to use at least a 0.2.9 version of the flashtool.... if you use 0.2.5 start with the 2.1.54 ROM first.
Hi everybody,
i'm stuck on WSOD.
I stil can access bootloader, the red,green,blue, white screen.
It displays as follow:
PB81100 HX-BC
SPL-2.0.8.HSPL 8G XE
RIFFBOX 0x05
Any clue on how to get out of this?
Thanks in advance
bump!
is the phone bricked?
No its not bricked.
Download a stock ROM from the HTC support site for your country with your S/N,connect your HD2 while on the bootloader (colored screen) and start flashing the ROM.
I think you can also get the spesific ROM for your device from here at the ROM Development section.
Hi, htc site downloads only the latest rom, i can't find the section where to put a serial number... anyway, i've downloaded the latest one for my country and from the SD it stucks on grey screen "Loading..." from USB it stucks on 0% (black screen with loading bar and no HTC logo)
Do someone knows where the htc site accepts s/n for downloading?
Can you tell what version of HSPL and FW do you have ,and what is your original FW country?
Edit:
http://forum.xda-developers.com/showthread.php?t=623283
In this thread you can find the official stock ROM of your device.
1-download it to your PC.
2-Connect your phone to the computer.
3-Run the Active Sync.
4-Run the Downloaded ROM,I think its RUU,5- read and follow the on screen instructions.
hagba said:
Can you tell what version of HSPL and FW do you have ,and what is your original FW country?
Edit:
http://forum.xda-developers.com/showthread.php?t=623283
In this thread you can find the official stock ROM of your device.
1-download it to your PC.
2-Connect your phone to the computer.
3-Run the Active Sync.
4-Run the Downloaded ROM,I think its RUU,5- read and follow the on screen instructions.
Click to expand...
Click to collapse
I don't have a HSPL right now its a SPL 2.08.0000ii and the country is ITALY.
I've downladed the latest 3.14 rom from italian website and i've attached it by usb and tried to flash, stuck at 0%.
as far as I remember SPL 2,08 is not for the FW version 3.14 its for older ROM.
Ok here is what you have to do:
1-from this thread download and install the HSPL2,you should do this by downloading to your PC and connecting your HD2 to Active Sync,read the thread the information is there.
http://forum.xda-developers.com/showthread.php?t=611433
2-from this thread download one of these Custom ROMs,anyone you like,and install the same way you did the HSPL2 and through the Active Sync.Dont wurry too many ROMs to chose from if you dont like it.
http://forum.xda-developers.com/showthread.php?t=612580
3- Do lot of reading and ask anything that you want an explanation.
4-Wahtever you do dont Flash anything from you phones SD card! just through the computer with Active Syng.
hagba said:
as far as I remember SPL 2,08 is not for the FW version 3.14 its for older ROM.
Ok here is what you have to do:
1-from this thread download and install the HSPL2,you should do this by downloading to your PC and connecting your HD2 to Active Sync,read the thread the information is there.
http://forum.xda-developers.com/showthread.php?t=611433
2-from this thread download one of these Custom ROMs,anyone you like,and install the same way you did the HSPL2 and through the Active Sync.Dont wurry too many ROMs to chose from if you dont like it.
http://forum.xda-developers.com/showthread.php?t=612580
3- Do lot of reading and ask anything that you want an explanation.
4-Wahtever you do dont Flash anything from you phones SD card! just through the computer with Active Syng.
Click to expand...
Click to collapse
As for the point 2: how can i connect it to active sync if it does not boot?
i've tried all options of HSPL and it won't flash anything, any version 1.66, 2.08 or 3.03.
If you are on tri color screen the pc and Active Sync must be able to recognize it.
however if you cannot Flash the HSPL your only hope is that you Flash a stock official ROM of your Devices original country and to do that you must know the exact region for your FW.
Same also happened to me once,I discovered that my HD2 FW country was South East Asia !! so after downloading and flashin it evrything started working once again.
Anyway if it didnk work,just go to the below link and ask help there from a guy called Anthony,register or use you facebook account for faster reply,he ussualy hangs around there and is always willing to help.
http://www.gsmarena.com/htc_hd2-reviews-2957.php
hagba said:
If you are on tri color screen the pc and Active Sync must be able to recognize it.
however if you cannot Flash the HSPL your only hope is that you Flash a stock official ROM of your Devices original country and to do that you must know the exact region for your FW.
Same also happened to me once,I discovered that my HD2 FW country was South East Asia !! so after downloading and flashin it evrything started working once again.
Anyway if it didnk work,just go to the below link and ask help there from a guy called Anthony,register or use you facebook account for faster reply,he ussualy hangs around there and is always willing to help.
http://www.gsmarena.com/htc_hd2-reviews-2957.php
Click to expand...
Click to collapse
i'm on tri color screen, the pc recognizes it and the "serial" changes to "usb" but activesync says its not connected for sync.
i've tried to flash any stock italian rom from 1.43 to latest 3.14 and always stuck at 0%, only sometimes at 1% then reboot...
May be you should try reinstall your Windows mobile Center,look for updates,it looks more like a PC software problem than a phone,did you try a different computer?
hagba said:
May be you should try reinstall your Windows mobile Center,look for updates,it looks more like a PC software problem than a phone,did you try a different computer?
Click to expand...
Click to collapse
i've tried 3 pcs, 1 with windows 7 and two with windows XP, same results...
Can't flash radio
Hi there,
After some different succesfull android installations I decided to do a task29. After that I couldn't flash the radio. Even with SD-method (renaming nbh-file on SD-card) I kept a white screen with HTC-logo, no RDG info on the buttom of my screen.
Then I flashed a stock winmo rom, succesfully. However, I want to go back to android. First think of checking some roms on SD. They all seem to get stuck on booting (or what ever). No progress, even after maybe 30 / 40 minutes. This is not normal, right?
I am reluctant to flashing any other stuff, scared of bricking my phone.
Can any one give me good advise? Like how I can get SD-roms to work for starters.
Thanks,
Mike
hagba said:
May be you should try reinstall your Windows mobile Center,look for updates,it looks more like a PC software problem than a phone,did you try a different computer?
Click to expand...
Click to collapse
A repair centre has done a JTAG without success (or they say so).
is it possibile even JTAG fails?
Ive opened this thread coz many people are finding my tutorial usefull
so here goes and if it helps let me know and give me a thanks
Hi i was new to all this and installed dynamics v2.0 fully unlocked rom the other day and this is how i went about it
download this
RUU_Mozart_Orange_UK_1.24.061.35_Radio_5.50.09.18_22.24.50.09U
http://www8.zippyshare.com/v/48117282/file.html
this is a load your phone back to 1.24
to install it i did this
turn phone off hold down volume down and turn phone on you should go to the bootloader screen then plug in your usb cable to the pc,
then on the white line at the bottom on phone screen should say usb instead of serial but maybe it will need to install some drivers cant remember 100%
when it is ready open that file and click the RomUpdateUtility.exe and follow the steps in that then you will have your phone back to 1.24
next you can follow this post here and download the attachment at the bottom named DFT_XSPL_WP7FG1.rar this what u need for this step
http://forum.xda-developers.com/showthread.php?t=1195647
basically this is the install procedure u may need to install active sync (XP) or windows mobile device center (vista and 7) but i did not have to my phone automatically did this
DFT_RSPL_WP7FG1_LAUNCH allows you to load RSPL on the device:
1. Extract ALL files from RAR archive.
2. Run DFT_RSPL_WP7FG1_LAUNCH (with administrative rights to access USB)
3. Mindfully reads information text. Press “Next” button.
4. Reset your device and hold “Volume Down” button during reset to enter OSPL mode.
5. Connect your device to PC via USB cable.
6. Now you may need to install proper USB drivers. They come with Active Sync / Windows Mobile Device Center.
7. Install drivers if required.
8. Make sure device show “USB” at the bottom instead of “Serial”.
9. Press “Next” button in the wizard. It should detect your phone.
10. If you are using WCEUSBHS driver under Windows Vista/7 (for MTTY or MAGLDR TTY for example), you should apply “Windows XP compatible mode” in the properties of EXE file to get connection.
11. After successful connection it should show device codename and allows to choose installed OSPL version.
12. You should look at the screen and select OSPL version in drop down list box. You need do this because it’s not possible to detect installed version via USB.
If your current SPL version doesn't present in the list, you can choose nearest version,
BUT ONLY IF IT HAS SAME FIRST NUMBER!!
Example: You have 4.XX on the device. Do NOT choose 1.XX 2.XX 3.XX.
13. Press “Next”. Wait until comes final page.
14. Read and close window
15. Look at the device – it must reboot to RSPL.
16. If you see RSPLX.Y.Z and “CotullaRSPL” on the screen – the task done! Otherwise, please report in this thread about your problems.
17. Put some feedback in this thread for community and developers.
Installing HSPL
DFT_HSPL_WP7FG1_INSTALL allows you to install HSPL on the device:
1. Launch RSPL on the device like described above.
2. Be sure that you close RSPL wizard window.
3. Run DFT_HSPL_WP7FG1_INSTALL.exe (with administrative rights to access USB)
4. Mindfully reads information text. Press “Next” button.
5. Proper drivers already must be installed in RSPL step.
6. Press “Next” button in the wizard. It should detect your phone.
7. If you are using WCEUSBHS driver under Windows Vista/7 (for MTTY or MAGLDR TTY for example), you should apply “Windows XP compatible mode” in the properties of EXE file to get connection.
8. After successful connection it should show device codename and allows to choose HSPL or OSPL version to install. OSPL means you install stock SPL back.
9. Check device codename, if something wrong turn off computer and run to the nearest forest. Grab some water with yourself.
10. Press “Next”. Wait until comes final page.
11. Device will reboot and start to boot OS.
12. Reset it and enter SPL mode again. Be sure there HSPLX.Y.Z and “CotullaHSPL” appear.
13. Put some feedback in this thread for community and developers.
Now u are ready
you can find what custom rom you want i used dynamics v2.0 which can be found here and its fully unlocked aswell so all i all im pleased with it
http://forum.xda-developers.com/showthread.php?t=1520352
download it and install the same way we installed the 1.24 rom in the begining of this post
turn phone off hold down volume down and turn phone on you should go to the bootloader screen then plug in your usb cable to the pc,
then on the white line at the bottom on phone screen should say usb instead of serial
when it is ready open that file and click the RomUpdateUtility.exe and follow the steps in that and then you will have loaded your desired custom rom onto your phone
I hope this helps some of u out and happy modding
best regards
steve
1.24
Great guide thanks, my phone is network unlocked do you know if that will revert once upgraded? also you mention rolling back to 1.24 what does 1.24 mean,and how do i find out if my device is on 1.24 already? one last Question how are you finding the rom any issues with it?
cheers
Geoff
geofferz said:
Great guide thanks, my phone is network unlocked do you know if that will revert once upgraded? also you mention rolling back to 1.24 what does 1.24 mean,and how do i find out if my device is on 1.24 already? one last Question how are you finding the rom any issues with it?
cheers
Geoff
Click to expand...
Click to collapse
1.24 im refering to the SPL you can find your version by turning the phone off holding volume down and power button and u will see your SPL at the top,
im not sure about the unlocked sim/network im new to all this aswell maybe do a search on the forums and see if you can find the answer, but i dont know this 1 sorry :/
rom is good no issues had a cable issue yesterday that wouldnt let me charge my phone but thats down to my dodgy cable
you dont have to install this rom you can use any custom rom you like or might find out there
anyways hope this helps
Launch RSPL
Thanks a great help.. ok to use to add tunes via zune? last bit on installing the custom Rom, what ruu option do I choose?
Cheers
hehe the first stage 1.2 spl.. when I open the rom update it gives a error 208? the update utility cannot open the requested file? any ideas and do i have to down to 1.2?
edit..Windows Mobile Device has been installed but when I open it, its not connected!! I powered of the phone with volume down. I can see the spl and usb at the bottom and it installed usb drivers etc, Im I missing a driver?
thanks once again
geofferz said:
hehe the first stage 1.2 spl.. when I open the rom update it gives a error 208? the update utility cannot open the requested file? any ideas and do i have to down to 1.2?
edit..Windows Mobile Device has been installed but when I open it, its not connected!! I powered of the phone with volume down. I can see the spl and usb at the bottom and it installed usb drivers etc, Im I missing a driver?
thanks once again
Click to expand...
Click to collapse
hi u don't need to worry about mobile device center this never picked up my phone either until I installed the custom rom
Don't ask why I've no idea
So what's happening when you press volume down and power you are seeing the multicolored bootloader screen right?
If so I don't know why the rom won't install for you
Maybe I've heard your firmware is at .707 if so you need y cables and its harder to downgrade your sol
tell me the firmware version please and ill try help u its in settings then about then advance on your phone if I remember
Oh also do not extract the 1.24 from the .rar file run everything from there
This is why ur getting that error I think
geofferz said:
Thanks a great help.. ok to use to add tunes via zune? last bit on installing the custom Rom, what ruu option do I choose?
Cheers
Click to expand...
Click to collapse
you dont need to select a option just load ROMUpdateUtility.exe
ive just downlaoded and reinstalled the rom myself to try see what u mean and i dont get this option
when you go to bootloader screen on your phone and it says usb open the rom file and click ROMUpdateUtility.exe
now dont open active sync or mobile tools as it says on the program information
just click the tick boxes and continue through the process
maybe try download the rom again found this
ERROR [208] : FILE OPEN
ERROR [210] : FILE READ
These error messages indicate that RUU lacks certain important files and cannot continue with the update. Please get the complete RUU package again.
but like i sed i have downloaded the file myself and it is working for me without any problems
beany2009 said:
hi u don't need to worry about mobile device center this never picked up my phone either until I installed the custom rom
Don't ask why I've no idea
So what's happening when you press volume down and power you are seeing the multicolored bootloader screen right?
If so I don't know why the rom won't install for you
Maybe I've heard your firmware is at .707 if so you need y cables and its harder to downgrade your sol
tell me the firmware version please and ill try help u its in settings then about then advance on your phone if I remember
Click to expand...
Click to collapse
Thanks for the help.
My firmware is 2250.21.40600.61,hope I don't need y cables for this version..
I see the multi coloured screen, and once plugged in to my pc it says usb at the bottom..
Strangely the 1.24 rom update works sometimes and not others, can you remember when you do done it, did it tell you want version currently on? because it didn't for me, I pressed next until update screen and was on 0% for bout 6-7 mins, my phone also displayed the same, how long did it take roughly
As regards to the Dynamics rom update.exe ( I opened with no phone attached ) It says welcome to the advanced rom update utility for Htc Mozart below that are, two ruu options.. regular (this is default) and below is custom I was thinking or using logic that I don't think i have hehe.. that the custom would be the option? or leave it
I really appreciate your help on this, I have installed many custom rom on android,but this windows phone grr annoying but I wont give up.
geofferz said:
Thanks for the help.
My firmware is 2250.21.40600.61,hope I don't need y cables for this version..
I see the multi coloured screen, and once plugged in to my pc it says usb at the bottom..
Strangely the 1.24 rom update works sometimes and not others, can you remember when you do done it, did it tell you want version currently on? because it didn't for me, I pressed next until update screen and was on 0% for bout 6-7 mins, my phone also displayed the same, how long did it take roughly
As regards to the Dynamics rom update.exe ( I opened with no phone attached ) It says welcome to the advanced rom update utility for Htc Mozart below that are, two ruu options.. regular (this is default) and below is custom I was thinking or using logic that I don't think i have hehe.. that the custom would be the option? or leave it
I really appreciate your help on this, I have installed many custom rom on android,but this windows phone grr annoying but I wont give up.
Click to expand...
Click to collapse
lol np mate ill try help as best i can
right i understand your bit now about the dynamics rom u need to select regular on this part
custom i think would be if u want to edit it or some **** but i have no idea so u use regular mate because this is the actual rom file made but remember u must downgrade and load rspl and hspl onto your phone before doing this step
right my firmware is 2250.21.51301.401 but i dont know if this changes on installation of the downgrade and adding the custom rom like i sed im a complete noob with this myself but all went smoothly for me thats why i made the tutorial
and no mate my phone took about 5-10 mins to install the 1.24 orange rom
have u tried a hard reset first and then see if it helps with the installation
ill search around for your firmware and see if there has been issues
edit..........................................
did a search on the forums and your firmware comes up with nothing :/ did a google and only shows this thread did you type the numbers correctly?
also you mean that the rom update works sometimes and not others?
if it works once it should install it mate np's
When you load you phone into bootloader the multicoloured screen can you please type here what u see mainly the top letters and numbers
beany2009 said:
When you load you phone into bootloader the multicoloured screen can you please type here what u see mainly the top letters and numbers
Click to expand...
Click to collapse
again thanks for your help
ok here goes red: PD 67100 ss-BC (4k)
SPL-4.6.2250.0(129193) mng
what you think?
i think my SPL was on that before so i dont know why u are having issues mate :/
maybe wait and see if a developer can read this and give us some info on why its not working for you :/
Thanx For The Help And the Tutorial It Was very Helpfull
Now my phone Is running dynamic 2.0
hey can u tell me what other custom roms are available that i can install on my phone and if there are any different methods of installing them
no problem mate glad it helped
erm the only other custom rom i have seen on mozart is deepdishing v7.0 you can find this in the development thread inside mozart topics
and for me mate im not sure and have not seen another way of installing another custom rom but im new to all this myself
anyway glad this helpped
regards
my computer wont pick up htc 7 mozart in bootloader
can anyone help me its doing my head in .
when you connect your phone to pc in bootloader its not showing as usb on the bottom of bootloader screen?
just serial?
just to confirm. this wont work on Asian handsets.
beany2009 said:
Ive opened this thread coz many people are finding my tutorial usefull
so here goes and if it helps let me know and give me a thanks
steve
Click to expand...
Click to collapse
Thx for the easy to follow guide.
It worked on a telstra brand mozart using windows 8.
Sent from my GT-N7105 using Tapatalk 2