During the upgrade of jasjar to wm6.5
After synchronization by activesynic and format the old version
Restart the machine work and entered the boot Loader system
Screen appears, written by usb from the top and bottom of v1.00
And a message from windows xp says usb device not recognised
And stop everything ....
I tried to install the driver of the usb from the cd but the pc does not accept
also tried more pc by xp, seven, vista
But the same thing ....
What is the solution
Related
Hi,
I have been upgrading to my 2.06.00WWE to 1.60a wm2k5 But when i connected and run bootloader mode and trying to run HimaUpgradeUt.exe or himaupgradeut_noID.exe was crashing or bootloader mode writings was dissappear so It says "101 communication error" so I put the HimaClearJumpCode.exe and run HimaUpgradeUt without bootloader mode when my Himalaya was runing it started and it run to just "removing your old rom" ad then it crashed again when I tried to restart my pocketpc It stuck to bootloader mode again and again.
I tried my old rom to upgrade but the same thing happens as bootloader screen writings disappear or crushings occur.I have an Tmobile mda.Thanks nad please help
I also tried to run himaupgradeut_noID.exe and when this bootloader writings disappear I disconnet it and open in bootloader mode to return writings and connect it to cradle again.Everything goes ok but when It comes to deleting and writing stage It gives me some error ocured and does not say which error is because there is blank
i would try using another pc
try using another pc that can be a error in windows
and do you have power aplied tothe xda when update?
I tried on my friends laptop win xp with sp2 and yes i applied the power to the cradle.. but it doesnt seem to work... bootloader mode shuts itself off when i start the HimaUpgradeUt.exe then it (the exe) crushes.
Zool said:
I tried on my friends laptop win xp with sp2 and yes i applied the power to the cradle.. but it doesnt seem to work... bootloader mode shuts itself off when i start the HimaUpgradeUt.exe then it (the exe) crushes.
Click to expand...
Click to collapse
The blank screen is normal. The display will return as soon as you confirm upgrade on PC screen prompt & it starts erasing the PPC ROM.
Have you tried waiting 'long enough' (at least 2 minutes) before the upgrade prompt confirmation displays in your PC?
When you said 'crashes' which one the PC or the PPC? Any message in your PC/Laptop? Have you installed Active Sync Version 4? Have you gone through with the Magneto Upgrade 'sticky' of XdaIIJojo & check for the prerequisites in upgrading?
Pls. check those 1st!
HimaUpgradeUt.exe crashes.Pc or PPC does not crash.I cant try it because of HimaUpgradeUt.exe crashes even ActiveSync 4.0 and says;
AppName: himaupgradeut.exe AppVer: 1.2.0.0 ModName: himaupgradeut.exe
ModVer: 1.2.0.0 Offset: 00010ed9
I have tried 3 different computer but the same HimaUpgradeUt.exe crashes.
I cant go on Magneto Upgrade 'sticky' of XdaIIJojo & because on this thread there is just a big picture.
Sorry to disappoint you Zool but, my setup is O2 Xda II & there could be some difference with your T.Mobile MDA.
Isnt there any other option ?
Apologies but have scoured all the threads and cannot seem to get to a straight answer!
Have a tocuh-dual which I attempted to update to the latest ROM from HTC and now I have the "tri-colour screen of death!) and can get no further,
The screen shows in thered band - RUUNBH | NIKI100 | SPL-1.16.0000 | CPLD-4. The white band shows "serial" and when I connect the USB lead it shows "USB".
But the PC does not recognise it at all and when I try to load a ROM or run MTTY nothing is found. How can I run a program on the touch if the PC will noit see it through the USB connection?
Any ideas?
Does your PC have active Sync installed? I had a similar problem when I installed a broken rom that would not boot up. I did a device reset using the stylus in the whole next to the USB, while holding the camera and power button to boot into the tri color screen. Once hear i plugged in my USB cable and ran a ROM install.
I hope this helps.
uncheck allow usb-connection in Active Sync
run mtty connect by USB
type "boot" without quotes.
same problem
i have got the same problem and can't get out of the tri-colour.
I try to connect with mtty and it says usb port cannot open. my pc can recognise it and in da phone it shows usb though, i don't really know why its not taking. if i type "boot" in mtty what will happen? cos when i click on com3 its opening but when i write "boot" nothing happening even with boot. any ideas guys? how to solve the problem????
Regards
u have to unckeck allow usb connection in active sync! then u can connect with mtty
Just one point - I am using Vista which does not use Activesync but Sync Centre and that does not give you the option to disable as far as I can see?
use xp
bodonline said:
Just one point - I am using Vista which does not use Activesync but Sync Centre and that does not give you the option to disable as far as I can see?
Click to expand...
Click to collapse
Use xp mate, cos vista has got some problems. normally for unlocking and upgrading i use xp. blow up the vista .
Regards
I will crank one up and let you know how it goes!
kill the task in the Task Manager... then u can connect with mtty
Tried killing the process but MTTY still says "USB port cannot open" - no idea what else to do?
If any Program use the USB Port ... no other Program can use the USB at the same time!
I was installing my Titan2 device on my Windows7 x64 desktop when downlaoding a podcast. It is a AMD system.
When I plugged in the Titan2, the installer started by now I keep gettings an error (!) givign a code 10 driver installation error.
Driver Error for Windows Phone 7 driver (under portable devices in device manager)
"This device cannot start. (Code 10)"
Every time I plug in my titan2 cable onto the PC, the driver attempts to install but always returns with this error. So basically Zune doesn't see my PC. The error (according to MS) seems to be a driver version issue. I can uninstall the device through the USB (connected devices) Eject Windows 7. It seems it doesn't recognize this is a Titan2. Any suggestions
ms driver
For Windows driver issues no matter which version of Windows or type of connected device, I would normally suggest uninstalling the driver through device manager if you have the original driver or can download it through Windows update, rebooting to be sure all the driver hooks are removed, then plugging your device back in and letting the driver be downloaded and installed fresh.
Good Luck!
mf2112
When i connect my SGS2 to my computer a little message pops up in the notification bar saying :
"the last device you connected to this computer malfunctioned" and when i go into Device manager i have a little yellow triangle next to an usb sayig "Unknown usb deivce" ,i've attached an image/screenshot that tells a better story.
Also when i connect the phone nothing happens on the phone (no icons, nothing).Just get that beep from the Windows.
I have tried :
- reinstalling the samsung drivers for the windows (event tried with Kies)
- tried mounting it from Recovery
- trying installing/reinstalling those windos usb drivers for that usb
nothing helps...any1 ?
Phone :
Custom rom , kitkat with TWRP recovery 2.7
PC :
Windows 8.1 64bit.
~ i have never had this problem before, i havent connected my phone to my pc in a long time so i dont know what could have caused this
So I got Xperia Ray, but it is simlocked to some carrier. I would like to unlock it's bootloader. As it is 11W37 it should be possible with s1tool.
But how to make this program work with Windows 8.1 (x64 if it's important)? Once per ten tries s1tool's window blinks and that's all I can get
Tried to start it as admin and as Win7 and Xp, but it didn't help...
Both OSes have all the drivers installed, except Zeus on Win 8.1 as it just installed it as some Qualcomm device, however as s1tool didn't work on this OS I just didn't bother with the drivers.
So I booted VMware and Windows XP SP3. There I was able to start s1tool and had no problems till app asked to PLEASE ATTACH TURNED OFF PHONE NOW. When I connected it with or without battery it wasn't recognised either as how (8.1) or as VMware XP...
So I'm stuck as I cannot launch s1tool on host and make guest to see turned off device
Any idea?