HardSPL is not installing - HD2 Windows Mobile 6.5 Q&A, Help & Troubleshooting

I just got my phone back from repair and I'm trying to install HardSPL. The installer for some reason isn't able to tell that the phone is connected and even though the phone says "USB" in the bootloader, HSPL doesn't see it.
HSPL is just stuck saying "Waiting for USB..."
Any hints? I'm using windows 7

pkchips said:
I just got my phone back from repair and I'm trying to install HardSPL. The installer for some reason isn't able to tell that the phone is connected and even though the phone says "USB" in the bootloader, HSPL doesn't see it.
HSPL is just stuck saying "Waiting for USB..."
Any hints? I'm using windows 7
Click to expand...
Click to collapse
make sure u are conected to the internet for driver update
chek your cable ))

make sure that your usb connection is set to active sync (on your device)

I had already tried all of the above and it didn't work.
(with regards to the activesync thing, the HSPL installer automatically took my phone into bootloader mode. So I don't think there was any issue there)
In the end, I just went and used a different computer.

I have a laptop, and i had the same problem. My solution was to connect my phone through another usb port on my computer (main usb port) try it with the other usb ports.
Hope this helped you

sahus said:
I have a laptop, and i had the same problem. My solution was to connect my phone through another usb port on my computer (main usb port) try it with the other usb ports.
Hope this helped you
Click to expand...
Click to collapse
Hmmm interesting....
However, the same USB port on my computer works for flashing ROMs and Radios so I doubt that is the problem. In fact, I used the same USB port for flashing the NRG rom straight after I hard spl'd my phone!
My solution was to just use another computer.
Thanks for your response. Hopefully this thread might help some guy in the future in a similar situation.

However, the same USB port on my computer works for flashing ROMs and Radios so I doubt that is the problem. In fact, I used the same USB port for flashing the NRG rom straight after I hard spl'd my phone!
,
Click to expand...
Click to collapse
actually just cos a port works for flashing means nothing. you can flash and sync through case mounted ports and usb hubs, but hspl won't work on those same ports.

Related

USB Sync Failure : Device Not Recognized/Malfunction

I seem to have a problem with my XDA II (Dopod 696). The device won't sync via USB, but it will sync via infrared. When i plug the USB cradle/cable in, the computer complains that "USB Device not Recognized" saying that one of the USB devices attached to this computer has malfunctioned, etc..
Now the problem is, this phone comes in Chinese software. If i have to active sync via BT normally it would be fine, but i need USB support to reflash in WWE ROM to the phone.
Or has someone come out with a total solution for flashing the phone via SD card already? I have tried the ROM 1.72 bootloader but it does not work at all. My bootloader is 1.02.
THe strange thing about this all is that when loaded into bootloader mode, the phone says Serial. When i plug in the cradle/cable, the phone can recognize the connection and it changes to USB. But it is still detected as a malfunctioning device on all 4 of my computers (WinXP x2 Win2k x2).
Help, somebody!
can't you put it in bootloader usb and then run an upgrade ?
M4io said:
can't you put it in bootloader usb and then run an upgrade ?
Click to expand...
Click to collapse
no..what kind of an upgrade would run on a undetected USB connection?
Even mttyl won't work.
So is a general SD-solution available yet? Or should I try by restoring a backup from another XDA II?
Anonymous said:
So is a general SD-solution available yet? Or should I try by restoring a backup from another XDA II?
Click to expand...
Click to collapse
Solved the problem..
Believe it or not, the connector on the bottom of the XDA II had actually had 4 pins twisted down...in particular the USBDATA+ and - pins clamped to ground (i think) thank goodness the device still works.
Managed to restore them to the original position with a blade, tweezers and a very nervous 20 minutes.
Have no idea what a replacement connector would have cost locally here. Probably another bomb (or as the "generic" solution goes.. Err, sir.. We need to replace your motherboard RUBBISH!

HSPL Error

Hello,
I found this forum, I have found a lot of things ... Intrigued me too reinstalling all of you cell phone, while I found some great ROM, so I thought I'll try it, I've read that if I want to install unofficial ROM, so I had to unlock the phone, but that is the problem when you want to unblock HSPL3 through, so I always get kind of error ... The program I run, I do, then connect phone via ActiveSync, while it is doing something and then I will write this error:
DFT HSPL3 for HTC Leo
CRITICAL ERROR
Flow:00000001
Error code:00000002
Discription: USB Connect failed!
Someone please advise me what can I do?
btw sorry for bad English... :/
did you try different usb ports?
do you use a desktop or notebook? if you use a desktop, make sure you plug the hd2 directly into the mainboard, not into a front usb port.
DN41
Yes, I tried all 4 USB ports, the error is still the same :/... And I have a notebook.... When I want to transfer files via the USB port, so in that there is no problem, it goes all the USB ports in order, just off this for me makes this error
did you try to flash hspl right out of the bootloader?
if not, put your phone into bootloader (power off and volume down button).
connect it via usb with your notebook. if the bootloader shows USB, you're connected. try to flash it now...
no warranty that it'll work..afaik its no problem, i did that some times before with success
DN41
notepad ports are likely to run through a single header, so could be the reason.
got a pc you can try?
I don't know whether this will solve the problem. I'm on Vista, using a notebook computer.
When I try to install, I always get error. But right-clicking on the file, then installing as administrator solved the problem for me. Maybe you could try?
Sorry if it doesn't work...
DN41 said:
did you try to flash hspl right out of the bootloader?
if not, put your phone into bootloader (power off and volume down button).
connect it via usb with your notebook. if the bootloader shows USB, you're connected. try to flash it now...
no warranty that it'll work..afaik its no problem, i did that some times before with success
DN41
Click to expand...
Click to collapse
Muhehe, had I succeeded to do, thank you DN41. I love you!
it's a pleasure
have fun with your "unlocked" phone
DN41
DN41 said:
it's a pleasure
have fun with your "unlocked" phone
DN41
Click to expand...
Click to collapse
Sure, thanks .
btw: you also a fan of unofficial ROM? Or do you have an official ROM, what is in your signature? I would only if you tell me to be a great ROM could not recommend . I found ChuckyROM, so I installed it, what do you say it?

USB of LG O1 not getting Detected by PC

First of all I am a big-Noob.
My LG optimus one P-500 is in stock ROM.
My Problem :-
Earlier USB was working fine but now
when I plug it in to the AC Adapter it charges OK but when I plug it in to the USB after that it only charges and neither the Phone nor the PC recognizes the USB data connection.
I have tried
1) Power off the phone and remove the battery for a couple of seconds and power it back up, after doing this the USB does not connects. Not even recognised by PC or Phone
2) Device manager also does not detect anything.
3) Uninstalled modem driver and reinstalled USB driver but no result.
Please help
Thanks in advance
Cheers
Request again
Dear mates
I have really very high respect for the forum so please help me out.
ThanQ
Cheers
This happened to me twice before. I had to send it to LG's Service Center because I saw no way of fixing it since the computer wouldnt know what to do with it...
If you have custom recovery installed, you might be able to flash an original ROM over it. This wasn't an option for me before and it seemed like the only way to fix my phone. Don't take my word for it though. Try for the service center first if possible...
Did you try going to settings and choosing Mass Storage only?
Also, change the USB port of the cable with which you connect your phone (plug the cable in another one - try this with all ports if it doesn't work the first time)...
Before going to any service, do a backup and Factory Reset your device, then try again...
Oh, and disable LG modem from Device Manager after installing the USB drivers.
USB not getting detected
I am trying in choosing Mass Storage only.
"Also, change the USB port of the cable with which you connect your phone (plug the cable in another one - try this with all ports if it doesn't work the first time)..."
Not helping either
Disabled LG modem from Device Manager after installing the USB drivers.
No use
Before going to any service, do a backup and Factory Reset your device, then try again...
I will try this definitely but going to service means 3-4 days without phone . really very scary .
thanks mate
anymore help
Okay , I did face this problem before and I did about hundreds of advice from my friends but this is the step that works.
I discovered that this happens when you do crazy **** on your sd card with applications such as titanium backup or root explorer. Curiousity kills the cat.
Firstly you need:
1) Usb Card Reader [Of course which suits with your sdcard]
2) Computer
Firstly, you want to dismount the sdcard from your phone and mount it to the USB Card Reader.
Connect the Usb Card Reader to your Computer.
You should be able to gain entry to the sdcard
Next,clear everything on your sd card then place your sd card on your phone back and do a factory reset. If you don't do a factory reset then you must do it all over again if you decided to connect the usb to the phone. After reset-ing the phone , try to connect your phone to the computer. Congratulations.
Note: This works for me but it doesn't meant that it will work for you , but I think that this is worth the try.
sanagg1 said:
First of all I am a big-Noob.
My LG optimus one P-500 is in stock ROM.
My Problem :-
Earlier USB was working fine but now
when I plug it in to the AC Adapter it charges OK but when I plug it in to the USB after that it only charges and neither the Phone nor the PC recognizes the USB data connection.
I have tried
1) Power off the phone and remove the battery for a couple of seconds and power it back up, after doing this the USB does not connects. Not even recognised by PC or Phone
2) Device manager also does not detect anything.
3) Uninstalled modem driver and reinstalled USB driver but no result.
Please help
Thanks in advance
Cheers
Click to expand...
Click to collapse
Ur phone charges through usb that means your phone usb port/usb cable is ok. Do this :
Uninstall the drivers, restart the pc and try connecting the phone again. Remember not to install the drivers again. Win7 save a dump of old drivers and i think it will auto detect it. Post results here.
Sent from my LG-P500 using Tapatalk
Got exactly the same situation with USB(on different PCs) and also Emergency mode on every reboot(taking battery out for about an hour helps).
Did SD wipe though not sure about factory reset afterwards, gotta try it one more time...
mansirawat said:
"Ur phone charges through usb that means your phone usb port/usb cable is ok."
Sent from my LG-P500 using Tapatalk
Click to expand...
Click to collapse
I would argue that, I have a samsung omnia that outright refuses to do anything besides charge over usb.
Brainy142 said:
I would argue that, I have a samsung omnia that outright refuses to do anything besides charge over usb.
Click to expand...
Click to collapse
Is it android ?
Lets wait for op reply.
Sent from my LG-P500 using Tapatalk
mansirawat said:
Ur phone charges through usb that means your phone usb port/usb cable is ok. Do this :
Uninstall the drivers, restart the pc and try connecting the phone again. Remember not to install the drivers again. Win7 save a dump of old drivers and i think it will auto detect it. Post results here.
Sent from my LG-P500 using Tapatalk
Click to expand...
Click to collapse
Unfortunately, it did not help either.
any ways,thanks for pointer
Cheers
mansirawat said:
Uninstall the drivers, restart the pc and try connecting the phone again. Remember not to install the drivers again. Win7 save a dump of old drivers and i think it will auto detect it. Post results here.
Click to expand...
Click to collapse
I have tried uninstalling driver and just plugging in with USB but still neither PC nor phone detects USB connection.
I have tried it on Win7, Win Vista and WinXP.
respected mates please help me.
I am on transfer in June so don't want to take chance with Service centre as of Now.
Cheers
Are you sure you are having the latest driver?
try this:
Code:
csmg.lgmobile.com:9002/client/app/B2CAppSetup.exe
install it,
(you may have to choose language from the last tab, 1st or 2nd option)
and choose P500 from "driver installation"
I didnt experience this issue but if i cant help im sorry.
Miasmic said:
Are you sure you are having the latest driver?
try this:
Code:
csmg.lgmobile.com:9002/client/app/B2CAppSetup.exe
install it,
(you may have to choose language from the last tab, 1st or 2nd option)
and choose P500 from "driver installation"
I didnt experience this issue but if i cant help im sorry.
Click to expand...
Click to collapse
I could not find P500.
the names were associated with carrier like T-mobile, verizone etc.
any suggestion
I know i'm stupid
cheers
sanagg1 said:
I could not find P500.
the names were associated with carrier like T-mobile, verizone etc.
any suggestion
I know i'm stupid
cheers
Click to expand...
Click to collapse
Try another cable.
Sent from my LG-P500 using XDA App
None of the above methods worked on mine as well - same results on different cable(pc/os).
Will try to flash rooted original firmware via custom recovery, del custome recovery and root and send it to service.

Semi-dead USB port; root options??

My Amaze 4G's USB port is semi-dead. It only charges the battery, but won't connect to PC. PC keeps saying "USB device not recognized." Tried different machines with Win7 or WinXP and different cables, but no luck.
I OTA upgraded to Telus ICS 4.0.3 and USB port is still dead. I have not unlock the bootloader yet.
I tried to get Telus to warranty the phone, but was refused as the phone is 2nd hand.
Any suggestion how to get 1) USB fixed and/or 2) root without USB?
Thanks!
f22b1 said:
My Amaze 4G's USB port is semi-dead. It only charges the battery, but won't connect to PC. PC keeps saying "USB device not recognized." Tried different machines with Win7 or WinXP and different cables, but no luck.
I OTA upgraded to Telus ICS 4.0.3 and USB port is still dead. I have not unlock the bootloader yet.
I tried to get Telus to warranty the phone, but was refused as the phone is 2nd hand.
Any suggestion how to get 1) USB fixed and/or 2) root without USB?
Thanks!
Click to expand...
Click to collapse
Call htc, you can send it to them to have it repaired via warranty once it's under a year old, which it is. All for free, though you'll have to get a backup device for a week or two.
Did you install the drivers in the first place...?
hasoon2000 said:
Did you install the drivers in the first place...?
Click to expand...
Click to collapse
I did install the HTCSync software on all the machines before plugging in my phone..
Try using Hasoon's tool, install the drivers from the tool and see what happens?
Actually, I had the same problem last night, and what I'd recommend you to try is to download a small program called usbdeview
it should be from nirsoft and then load that up (as an administrator) , look for all HTC/android listings and then uninstall all of them
restart your computer, and then download the latest HTC sync drivers and install it.
But if that doesn't work, I believe that would lean over to be a hardware issue.
.
Sent from my HTC_Amaze_4G using XDA

USB Problem

Okay guys ive tried really bad to not create a new thread bout it but i need help
ive searched for every single thread about usb problems on l9 but neither one helped
tried installing lg drivers new/old ones,installin LG Suite restarting pc/phone but still gettin same error
The problem is when i plug my usb cable in pc then phone ive get error (USB Device not recognized)
(USB Device not recognized) , and phone only start to charging ://
Sometimes it starts to download some drivers but it always get error on some MTP driver ://
I just want to root my phone badly
thanks in advance
karisha91 said:
Okay guys ive tried really bad to not create a new thread bout it but i need help
ive searched for every single thread about usb problems on l9 but neither one helped
tried installing lg drivers new/old ones,installin LG Suite restarting pc/phone but still gettin same error
The problem is when i plug my usb cable in pc then phone ive get error (USB Device not recognized)
(USB Device not recognized) , and phone only start to charging ://
Sometimes it starts to download some drivers but it always get error on some MTP driver ://
I just want to root my phone badly
thanks in advance
Click to expand...
Click to collapse
Try booting computer into safe mode and see what happens.
kevev said:
Try booting computer into safe mode and see what happens.
Click to expand...
Click to collapse
ive tried still gettin USB Device not recognized :// and starts chargin
only one time i connected my phone with usb i think thats the first time when i bought phone few days ago and that was last time
is it PC problem or phone?
please help )
karisha91 said:
ive tried still gettin USB Device not recognized :// and starts chargin
only one time i connected my phone with usb i think thats the first time when i bought phone few days ago and that was last time
is it PC problem or phone?
please help )
Click to expand...
Click to collapse
Hard to tell. Check the device manager. You may need to manually select the driver that the device uses. Also, try another computer.
kevev said:
Hard to tell. Check the device manager. You may need to manually select the driver that the device uses. Also, try another computer.
Click to expand...
Click to collapse
ill try another pc ,but thanks ,if some find out a solution post it thanks )
im looking forward it
karisha91 said:
Okay guys ive tried really bad to not create a new thread bout it but i need help
ive searched for every single thread about usb problems on l9 but neither one helped
tried installing lg drivers new/old ones,installin LG Suite restarting pc/phone but still gettin same error
The problem is when i plug my usb cable in pc then phone ive get error (USB Device not recognized)
(USB Device not recognized) , and phone only start to charging ://
Sometimes it starts to download some drivers but it always get error on some MTP driver ://
I just want to root my phone badly
thanks in advance
Click to expand...
Click to collapse
I am not sure, but have you tried connecting directly to the pc at backside usb? the usb on motherboard? well the symptoms are exactly same when you put on front usb port on pc.
I hope you are using original cable. Sometimes bad and lengthy cables do loss signals and this happens. Voltage passes but not the data making it undetectable. feedback.
cmahendra said:
I am not sure, but have you tried connecting directly to the pc at backside usb? the usb on motherboard? well the symptoms are exactly same when you put on front usb port on pc.
I hope you are using original cable. Sometimes bad and lengthy cables do loss signals and this happens. Voltage passes but not the data making it undetectable. feedback.
Click to expand...
Click to collapse
tried but nothing :/ windows cant install driver ,guess no root for me (
Have you got Windows Media Player? If not install media feature pack.

Categories

Resources