so i was wanting to load the bionix rom, so i did a nandroid on my last rom. bionix was "okay" so i decided i wanted to go back to my eugene rom.
so i use rom manager to load the old image, and while doing so it gives me some error that i should report to rom manager. i cant exactly say what it was. so i told it to reboot, but now im back on bionix, and all my apps are crashing. i cant get into the launcher or anything. so getting to rom manager was out of the question.
so i call my friend who says i probably need to load a stock image, which thats fine whatever. so i do some googlin' and i come across this method forum.xda-developers.com/showthread.php?t=734475 (new user..cant post links)
i try to follow the directions best i could. ive never used odin before. so for the "pit" i select the "samsung galaxy s firmware flasher" (which was the only file my computer let me pick) and for the pda part i selected t959uvjd.tar file they also had listed. also the instructions said i didnt need to select the other boxes (phone, csc, etc)
so i put it in recovery, hit start, after a few minutes my screen just shows the little android guy and a caution sign. odin still says "file analysis" and its been like this for about 20 minutes...
so....where do i go now? please be as descriptive as possible..apparently im still a lil green at all this
How did you get into recovery mode? Are you sure it wasn't download mode? Did you use the hardware way with vol up +dwn and power or did you use adb
http://lmgtfy.com/?q=did+i+brick+my+vibrant
splayer7 said:
How did you get into recovery mode? Are you sure it wasn't download mode? Did you use the hardware way with vol up +dwn and power or did you use adb
Click to expand...
Click to collapse
i used adb to get into recovery. i figured out its not bricked. i restarted it and its doing the same thing. by that i mean it boots up, but all my apps are crashing still..so i guess i gotta figure out how to actually use odin to mount the stock image.
before you use odin, make sure you are hardware unlocked. I bricked one that was hardware locked using odin. Read, read, read.
The android guy and the caution sign is download mode, what you need to flash odin. Odin can be finicky. Once your in dl mode on your phone, unplug it from the usb cable, then launch odin and load the files. Reconnect your pc and you should see a com port light up in odin. If it doesn't light up, disconnect and reconnect again, or relaunch odin, reload the files and then reconnect the usb. Sometimes it takes some playing with it to find the right combo to make it work. After that its happy flashing time, you should see the progress under the selected com port in odin, kick back and wait for the reboot.
Be sure you have the GalaxyS drivers loaded on your pc too, your comp will never see your phone in dl mode without the drivers
Sent from my SGH-T959 + bionix 1.3 (= sexiness) using XDA App
BossDj said:
The android guy and the caution sign is download mode, what you need to flash odin. Odin can be finicky. Once your in dl mode on your phone, unplug it from the usb cable, then launch odin and load the files. Reconnect your pc and you should see a com port light up in odin. If it doesn't light up, disconnect and reconnect again, or relaunch odin, reload the files and then reconnect the usb. Sometimes it takes some playing with it to find the right combo to make it work. After that its happy flashing time, you should see the progress under the selected com port in odin, kick back and wait for the reboot.
Be sure you have the GalaxyS drivers loaded on your pc too, your comp will never see your phone in dl mode without the drivers
Sent from my SGH-T959 + bionix 1.3 (= sexiness) using XDA App
Click to expand...
Click to collapse
Download mode for me is an android guy is IN a triangular caution sign & says "downloading..."
Stock recovery with the MENU button pressed shows me an android standing next to a caution sign. Think the op should clarify.
All~G1 said:
Download mode for me is an android guy is IN a triangular caution sign & says "downloading..."
Stock recovery with the MENU button pressed shows me an android standing next to a caution sign. Think the op should clarify.
Click to expand...
Click to collapse
I do remember the little andriod guy and the caution sign from the one and only time i got stuck in stock recovery. I can't boot to it with any button combo, but the first time I tried to make an update.zip myself, well, yeah i got rebooted to stock recovery. My mind went to dl mode when I read the op, as thats what I have the most experience using, and luckily can boot to that way easily on my phone. I think you are correct G1, op may be booting to recovery mode and attempting to flash, when dl mode is whats necessary.
Sent from my SGH-T959 (+ bionix 1.3 + kingklicks kernel = sexiness) using XDA App
BossDj said:
The android guy and the caution sign is download mode, what you need to flash odin. Odin can be finicky. Once your in dl mode on your phone, unplug it from the usb cable, then launch odin and load the files. Reconnect your pc and you should see a com port light up in odin. If it doesn't light up, disconnect and reconnect again, or relaunch odin, reload the files and then reconnect the usb. Sometimes it takes some playing with it to find the right combo to make it work. After that its happy flashing time, you should see the progress under the selected com port in odin, kick back and wait for the reboot.
Be sure you have the GalaxyS drivers loaded on your pc too, your comp will never see your phone in dl mode without the drivers
Sent from my SGH-T959 + bionix 1.3 (= sexiness) using XDA App
Click to expand...
Click to collapse
well origionally i was not in download mode, i only saw the screen i was talking about once, but i ended up actually getting it into download mode and using odin tried flashing the stock roms. it would hang everytime. the only rom i was able to get working was eugenes froyo port. its incredibly buggy and a whole lot of things dont work correctly on my phone. i tried the unlocking method to see if that helps, but my phone is really fighting everything i do right now.
but i do have a replacement coming, so im just gonna deal with a phone that wigs out whenever i try to do stuff for a few days.
Related
I googled how to reset my phone back to factory settings and they gave me this link
"[STOCK ROM] Odin3 One-Click Downloader"
(cant link links)
i misread that it was for the captivate, and i went through with all the directions.
now my phone keeps flashing an AT&T bootscreen and i cant get it in recovery mode..
help?
same here... that odin thing isn't working. Im just stuck at the vibrant boot screen. I know how to get into download mode but my pc or ODin doesnt recognize that i have my phone in. it's suppose to light up yellow or something. the tar files and all of that stuff is so confusing.
nevermind, i found the Odin program for the samsung vibrant and re did it.. but i still have BOTH at&t boot screen at the tmobile vibrant boot screen.. anyone know how to get rid of that? it would be much appreciated thanks!
http://forum.xda-developers.com/showthread.php?t=741027
where did u find it.. please share..
Edit: NVM..
stepinmyworld said:
same here... that odin thing isn't working. Im just stuck at the vibrant boot screen. I know how to get into download mode but my pc or ODin doesnt recognize that i have my phone in. it's suppose to light up yellow or something. the tar files and all of that stuff is so confusing.
Click to expand...
Click to collapse
You may have tried this but these are the steps that eventually worked for me.
1. Put your phone in download mode by plugging it in and then holding Vol Up+Down and Power. As SOON as the screen goes black release power but NOT Vol Up+Down.
2. Launch Odin
3. Unplug your phone.
4. Load the pit and pda files into odin.
5. Plug your phone back in. You should now see one of the small blocks turn yellow and show you the com port. If not, something is wrong with your drivers.
6. Click start. If it flashes, great. If it hangs at File analasys then repeat 1-5.
6a. If Odin hangs at cache.rfs then move on to 6b.
6b. Unplug your phone (Odin will say it was removed) and remove the battery. DO NOT SHUT DOWN ODIN!!!!!!
6c. Put the battery back in and plug it back into your computer and put it back into download mode using step 1.
6d. Press start on Odin and it should now flash.
Again, this worked for me, it may have been a fluke and I'm not willing to try it again. Good luck!!!
Does not boot!
What if the phone does not boot. All happened after I tried to flash the kernel back to the stock one. USB plugged in, battery is fully charged- still no sign of life. Any solution for that? No recover or download mode!
setzer715 said:
You may have tried this but these are the steps that eventually worked for me.
1. Put your phone in download mode by plugging it in and then holding Vol Up+Down and Power. As SOON as the screen goes black release power but NOT Vol Up+Down.
2. Launch Odin
3. Unplug your phone.
4. Load the pit and pda files into odin.
5. Plug your phone back in. You should now see one of the small blocks turn yellow and show you the com port. If not, something is wrong with your drivers.
6. Click start. If it flashes, great. If it hangs at File analasys then repeat 1-5.
6a. If Odin hangs at cache.rfs then move on to 6b.
6b. Unplug your phone (Odin will say it was removed) and remove the battery. DO NOT SHUT DOWN ODIN!!!!!!
6c. Put the battery back in and plug it back into your computer and put it back into download mode using step 1.
6d. Press start on Odin and it should now flash.
Again, this worked for me, it may have been a fluke and I'm not willing to try it again. Good luck!!!
Click to expand...
Click to collapse
i am completely lost when it comes to ODIN. I need to know the exact program to use. I have Odin Multi Downloader v4.03.. but it keeps giving me file path error and stuff. I have the right drivers i think because it does recognize my phone. im just so confused with this rar tar stuff. I would pay someone 20 dollars through paypal if they can walk me through this.
stepinmyworld said:
i am completely lost when it comes to ODIN. I need to know the exact program to use. I have Odin Multi Downloader v4.03.. but it keeps giving me file path error and stuff. I have the right drivers i think because it does recognize my phone. im just so confused with this rar tar stuff. I would pay someone 20 dollars through paypal if they can walk me through this.
Click to expand...
Click to collapse
I don't want your money, but if you PM me I will try to type up a detailed how to.
mffu said:
What if the phone does not boot. All happened after I tried to flash the kernel back to the stock one. USB plugged in, battery is fully charged- still no sign of life. Any solution for that? No recover or download mode!
Click to expand...
Click to collapse
What have you done to put it in download mode? You should power off your phone, plug it into your computer. It should then enter the charge mode where you see a picture of your battery being charged (or if you were like me and screwed up somewhere you may see a little picture of a phone, computer and yellow triangle in between them). If you get either of those then press and hold all three VOL up, VOL down and power. AS SOON AS the screen goes black release ONLY Power and it should go into download mode.
If you plug your phone into your computer (powered off) and nothing happens then you just be bricked. Call TMO and play dumb and hopefully get a replacement.
Ok,
The_Chrome_Coyote really helped me!!!! Thank you so much and im back up and running. There was something missing from the original tutorial, not that we should be spoon fed but I didn't have the WinRAR program on my pc and didn't know I needed to extract anything. I was looking for exe. for it to be a program and just open it. It's a little more complicated than that. I added my additions in BOLD
The_Chrome_Coyote's Original post to me:
Odin isnt that hard, its just REALLY picky about working.
Firstly you need to download the Samsung drivers for your OS which can be found:
http://forum.xda-developers.com/showthread.php?t=728929
added:
Second you need to make sure you download WinRAR x86 (32 bit) 3.93 (google it and you should be able to get it) otherwise if your pc doesn't have a program to recognize rar and tar files, you are out of luck.
then read this thread from JAC:
http://forum.xda-developers.com/showthread.php?t=734475
1. Now, Extract ODIN from its .rar and place the .exe on your desktop
2. Extract the .pit file from its.rar and place that on your desktop
3. Place the JFD .tar file on your desktop but DO NOT EXTRACT
Now you can use ODIN
4. Start ODIN Odin3. [Android + SLP], through ODIN select the .pit file
5. Hit "PDA" button, and through ODIN select the .tar file
6. Plug your TURNED OFF PHONE into the USB cable
7. Wait for the Battery/ charging indicator to start
8. HOLD VOL UP+ VOL DOWN+ POWER, as soon as the screen goes black RELEASE POWER, and continue to HOLD VOL UP+ VOL DOWN Until it enters download mode. Which should happen quickly and looks like a men at work highway sign.
9. If a COM port has turned Yellow in ODIN, then the device has been recognized. If it hasnt, unplug and plug your phone back in.
10. Dont select any options other than whats set at default.
11. Hit Start and be patient, takes me maybe 5 minutes to get back up and running.
NOTE: If you do not see a blue progress bar on the phone's screen after a minute;
11a. Turn your phone off by pulling the battery.
11b. CLOSE ODIN
11c. Start at step 4 again.
ODIN needs to be open and ready to flash before the phone is plugged in, in my experience. Its very picking about this, and not everyone has this issue, but I did and following all these steps helped me flash my phone more times than I can count the other day haha.
Hope this helped! and your $20, donate it to Wes, JAC, or Eugene to keep them making great stuff for our phone.
Reply With Quote
Thank you thank you thank you
mffu said:
What if the phone does not boot. All happened after I tried to flash the kernel back to the stock one. USB plugged in, battery is fully charged- still no sign of life. Any solution for that? No recover or download mode!
Click to expand...
Click to collapse
Same thing happened to mine when i tried odin. Now all i get sometime when it come on. are 7 rows of text that seems to be a code on screen in amber. Ishipped back 2 samsung. Since t-mobile won't take it after 14 days.
ok I screwed up guys.
I installed ROM manager from the market, flashed clockwork, it asked me if I wanted to partition and I said yes.
Now I just get a black screen at boot. I've managed to run odin and it says success. But I still just get a black screen after boot.
Little help?
I do have to say that if YOU DO NOT KNOW HOW TO EXTRACT A COMPRESSED FILE (RAR, ZIP,ETC) YOU HAVE NO BUSINESS FLASHING YOU'RE PHONE!! Odin or otherwise.
I am not being mean but at least stick to update.zip files flashed through recovery and make sure you read reviews of other users first, and understand the instructions completely.
Sent from my SGH-T959 using Tapatalk
daddysays said:
I do have to say that if YOU DO NOT KNOW HOW TO EXTRACT A COMPRESSED FILE (RAR, ZIP,ETC) YOU HAVE NO BUSINESS FLASHING YOU'RE PHONE!! Odin or otherwise.
I am not being mean but at least stick to update.zip files flashed through recovery and make sure you read reviews of other users first, and understand the instructions completely.
Sent from my SGH-T959 using Tapatalk
Click to expand...
Click to collapse
First: everyone was a noob at one time, so simmer down.
Second: Pleast post an update.zip that will make my phone work.
Cannot get past Galaxy S boot screen
I was using clockwork recovery installed through an update.zip file on my sd card. everything was working fine for about a day and then when i powered my phone off the next day and powered it back on it would not boot up past the Galaxy S screen. it goes to the Galaxy S screen and then goes blank but my hard keys stay lit up while my lcd is completely blank. I tried using the Odin method described in this thread and it seemed like it was going to work but i still cannot get past the boot screen. please help. willing to donate if needed
jmoney1017 said:
I was using clockwork recovery installed through an update.zip file on my sd card. everything was working fine for about a day and then when i powered my phone off the next day and powered it back on it would not boot up past the Galaxy S screen. it goes to the Galaxy S screen and then goes blank but my hard keys stay lit up while my lcd is completely blank. I tried using the Odin method described in this thread and it seemed like it was going to work but i still cannot get past the boot screen. please help. willing to donate if needed
Click to expand...
Click to collapse
If you can see the samsung logo you are fine. Load up recovery and try a full wipe first. If that fails then you can odin back to stock and root again.
Sent from my SGH-T959 using XDA App
1. If you have questions, there is a q and a forum for this device!!!!!!
2. THIS IS THE DEV PART OF THE FORUM. IE FOR DEVS POSTING STUFF FOR THE PHONE!!!!!
3. Learn how to Google. Not that hard. Example, you don't know what the *.rar extension is. GOOGLE IT!! Google knows everything.
4. If you don't have basic android or computer skills, don't try anything stupid. You do have a chance to brick your phone, even the pros like cyanogen have bricked their phones.
5. Don't offer cash for someone to fix your phone. Keep it in qna and some one will help you. Save your cash for the development that work hard on making these things work.
6. Can a mod please move this thread to qna.
7. THE MOST IMPORTANT THING. USE THE SEARCH FINCTION BUILT ONTO THE FORUMS. IT WILL SAVE YOU TIME AND THEN YOU WILL NOT LOOK LIKE NOOBS THAT JUST GOT THIS PHONE BECAUSE IT HAD AVITAR IN THE BOX!!!!!
Sent from my SGH-T959 using XDA App
cache.fs problem in odin
setzer715 said:
What have you done to put it in download mode? You should power off your phone, plug it into your computer. It should then enter the charge mode where you see a picture of your battery being charged (or if you were like me and screwed up somewhere you may see a little picture of a phone, computer and yellow triangle in between them). If you get either of those then press and hold all three VOL up, VOL down and power. AS SOON AS the screen goes black release ONLY Power and it should go into download mode.
If you plug your phone into your computer (powered off) and nothing happens then you just be bricked. Call TMO and play dumb and hopefully get a replacement.
Click to expand...
Click to collapse
I FOUND A SOLUTION TO THE CACHE.RFS PROBLEM!!
http://www.fractionalphones.com/?p=121
Okay so i ditched the stock rom for axura 1.0 and am using it...but i changed my mind and want to go back to stock...but never made a backup of my stock rom in clockwork like a moron. Now i tried Odin and here is the weird part it detects my phone in recovery mode...but not download mode so now im stuck trying to get back to stock vibrant 2.1...any suggestions?
Thank You
Start odin first, then hold the volume keys, then insert the usb cable
This always works for me when odin doesn't detect my phone
Sent from my SGH-T959 using XDA App
S4BRE2121 said:
Start odin first, then hold the volume keys, then insert the usb cable
This always works for me when odin doesn't detect my phone
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
I Have the same problem I did all the steps even tried to do the step you told us to. Still didnt work. what should i do?
Sometimes reinstalling drivers works for me when Odin doesn't see it.
cgol92 said:
Okay so i ditched the stock rom for axura 1.0 and am using it...but i changed my mind and want to go back to stock...but never made a backup of my stock rom in clockwork like a moron. Now i tried Odin and here is the weird part it detects my phone in recovery mode...but not download mode so now im stuck trying to get back to stock vibrant 2.1...any suggestions?
Thank You
Click to expand...
Click to collapse
This is the easiest way. Download Terminal from Market and enter SU (gives you root access) and then type reboot download
Your phone will reboot into Download mode
i tried the su reboot download and it didnt detect it and i reinstalled the drvers too no luck cuz it says usb device not reconized when in download mode but when in recovery or normal mode it is detected no issue
Here's how I do it if everything else fails. Have ODIN v1.3 opened up first. Next, make sure phone is in debug mode and make sure its checked . Next,while phone still connected to pc, remove back cover and pull battery out. Before inserting the battery back in, hold the phone side ways while pressing the volume up/down at the same time now insert the battery. Your screen should now display yellow big letters -
Download Mode - Do not turn off target.
cgol92 said:
i tried the su reboot download and it didnt detect it and i reinstalled the drvers too no luck cuz it says usb device not reconized when in download mode but when in recovery or normal mode it is detected no issue
Click to expand...
Click to collapse
Read the Vibrant Bible here http://forum.xda-developers.com/showthread.php?t=771111 . Read the top 2 sections --Useful links and Odin.
By the way, is your phone rooted?
Have you tried using a different USB port? Sometimes that helps.
yes the phone is rooted and i tried using odin v1.0 and 1.7 ill try 1.3 idk if it makes a difference
One method I've read on the boards is to flash "Eugene's froyo that doesnt' Brick". Of course that is an Odin file so...we need to get Odin working for you. Like icandy said, try a different USB port and see if that works. If nothing else also post in Master's Axura thread and ask him/her what the best method of downgrading to 2.1 is. I'm not sure if you'd have to flash Eugene's Kernel Back Support or not. I know this isn't too helpful but hopefully it'll give you a few ideas.
~SB
So here is what happened. Running Nero 3 w/voodoo enabled. Disabled Voodoo and rebooted, got stuck at Vibrant screen for an hour, booted into recovery and confirmed voodoo was disabled. Rebooted and am stuck on the boot loop with a crazy voice saying something I can't understand.
So I am trying to use Odin 3 1.7 to reflash to stock. But Odin doesn't recognize my phone.
This is what I've done so far (after searching around for hours): After going into download mode, my computer only found a "gadget serial". I installed the SAMSUNG Android Composite ADB Interface driver and now my computer recognizes it. But it says "device cannot start".
Any help/ideas/thoughts would be much appreciated!
take the simplest approach, put nero v3 back on your internal and flash it.
the voice was LINDA (android voice) disabling voodoo, this can take up to 10 minutes (usually a little less).
What were you wanting to change to, from nero v3? (why did you disable voodoo, I assume you were going to flash something).
Just throwing this out there, because I almost made this mistake...
Are you sure you didn't jump the gun during the reboot? It can take a while to
complete and Linda chimes in a few times with stuff you can't hear unless it's quiet and your volume is up.
I would love to just go back to Nero 3 and wasn't trying to flash anything new, I just wanted to disable voodoo in case I forgot later on.
I would also love to be able to flash anything, but I can't get into recovery mode at all anymore. Any suggestions on that?
And I can't get Odin to see the device and the computer (Win 7) says the device can't start.
To connect to Odin is the phone off?
Shut off the phone and hold the volume +- then plug in the usb.
If that doesn't work take the battery out and plug in the usb. While holding volume +- put the battery in the phone.
Hopefully one of those gets it to connect to Odin. You will see a com port light up in Odin.
Yes, the phone is on. I have the download screen lit up. My problem is that in device manager, it appears that the computer is saying that the device won't start. I'm stumped. I am going to try a different computer. Maybe its Windows 7.
zedgar said:
Yes, the phone is on. I have the download screen lit up. My problem is that in device manager, it appears that the computer is saying that the device won't start. I'm stumped. I am going to try a different computer. Maybe its Windows 7.
Click to expand...
Click to collapse
Open Odin before connecting the phone in download mode. The phone should be off when connecting to Odin.
Still no luck, off or on when connecting to Odin. Odd, b/c I've used Odin before. I am still thinking it is a driver issue.
If you used ODIN on that same pc, it is not a driver issue.
take the battery out.
put it back in.
open ODIN
plug USB into PC
hold both volume buttons (and keep them held)
plug usb cable into phone
download mode, right?
did ODIN show a COM# in yellow, yes right?
load the pit and tar files (I use the files in my noob guide alt method since it keeps root)
press start, nothing else, wait for it to reboot.
damn. even if you follow the instructions, sometimes something bad will happen.
Sent from my SGH-T959 using XDA App
I am actually using a different PC at work. This is why I think it is the driver. I follow all the steps and still no yellow box in the COM. When I go into device manager, I see the device but the warning that it cannot start (code 10). So hopefully everything will work out on my computer (XP) at home where I used Odin before.
I will update once I do that
So here is an update. Got home and Odin recognizes the device. The problem I now have is that it stays stuck on SetupConnection. Do I just wait a number of hours or is there something else I've done wrong?
Do you have the right stock rom TAR file and PIT file? Did you check box repartition?
Sent from my SGH-T959 using XDA App
Thanks to all and Further update:
I got it to start downloading but now Odin stalls at factoryfs.rfs
I'm running 512 PIT and JFD tar.
I've taken out the SIM/External SDs and have tried all the USB Ports. Any thoughts? It seems so close but yet so far away.
I am downloading the tar and pit files again and will reboot, etc. Hopefully that will get me over the edge.
Did you check the repartition box when you tried to odin? Place pit file with pit section obviously. Place tar file with pda section. Check the repartition box. Do you remember if the voice actually said "voodoo is now disabled"? If not it still might have been activated which will make it much more difficult.
Sent from my SGH-T959 using XDA App
Solved (hopefully)!
What I did was download the all_in_one zip that had two .tars in it and used the "original" one. For some reason I can't find a link to that thread or I would certainly post it here and give my thanks etc. If someone has that handy, please post it.
I will check to make sure everything is working fine, but so far so good.
Overall lessons...this is a tough phone to brick and the excellent people here can help. Even just brainstorming leads to one finding a solution on their own.
The combo of different downloads of the .tar/.pit rebooting, different ports somehow worked.
Glad to hear it worked
Sent from my SGH-T959 using XDA App
Today was I was watching the video on how to flash darky's resurrection.zip rom,
then zi tried flashing it to my wifes Vibrant , I folloeed the video step by step. I used odin I get the green light saying the phone passed then when it reboots it get stuck on the galaxyi900 screen and it doesnt boot up. Ive flashed the thing with odin at least 10 -15 times after and still no luck, it keeps getting stuck at the opening. My wife says if I dont fix it I have to buy her a new phone. Someone save me please!!!!!!
LMAO........... yeah my wife said the same thing...... sounds like you may have not disabled the voodoo lagfix before the flash.
you will probably need to flash back to stock. I am not sure what is stock on this phone I am going to assume it is the same Vibrant.
If you can get into recovery and you did have voodoo installed disable it. If not you can disable it on your phone and copy the folder and then load it into the internal sd card messed up phone and replace the old folder.
Then you may need to use Eugenes froyo that does not brick as a intermediary flash. if you can Odin that (use Odin 1.7) then when it you flash it do not check the repartition box. When it is beginning to reboot, do not let it fully reboot, pull the battery. Then Redo the Odin as described below:
Open Odin.exe and plug a usb cable to your computer that will connect to your phone (do not plug it in to the phone yet, just the computer)
Hold down both volume buttons at the same time and while holding them down plug the usb into your phone. You should see a COM message show up in Odin.
Leave all check boxes the way they are. Check the repartition box.
Click the PIT button and select the 512.pit file
Click the PDA button and select T959JFD.tar and then click Start
When it is done you will be back at stock. Then Root the phone and go from there.
still getting the loop! this phone is jacked up. I can enter download without pressing the power button, cause it turns on and off itself
My phone just keeps flashing the opening Samsung galaxy s gt-i9000
Oh good I don't know the pit or .tar files sorry
Sent from my SGH-T959 using XDA App
Omar50 said:
still getting the loop! this phone is jacked up. I can enter download without pressing the power button, cause it turns on and off itself
Click to expand...
Click to collapse
take the battery out, wait 30 seconds, plug the usb cable in, and then hold both the volume buttons and slide the battery in. Presto! Download mode.
This has saved me numerous times lol. Then just flash JDF like oka said
i dont have problem entering download mode. When I flash with odin I get a pass on it. but when the phone reboots it stays on the opening screen go on and off
i download the heimdall suite 1.1.1 and the necessary windows program to run it. when i plug my phone into download mode heimdall start button isn't accessable. am i missing something?
figured out hoew to get access to start button, dont use partition. now it gets error on recognizing the device. Im so frustrated right now I need a smoke!!!!!!!
Omar50 said:
figured out hoew to get access to start button, dont use partition. now it gets error on recognizing the device. Im so frustrated right now I need a smoke!!!!!!!
Click to expand...
Click to collapse
Depends on what you smoke........
You may need the pit 513 file instead of the pit 512 file, these mapping files are a bit different and it may be a cause. Hard to know without seeing the phone
Also you could do a full wipe if you can get into recovery, wipe cache, phone reset and dalvik wipe (in advanced) then try That may work better for you.
It is recoverable.......... and also the best way to get your wife to calm down......... a romantic restaurant with candle light........ you go on Tuesday and she goes on Thursday........
Hope you get it fixed..........
thanks for the support but no luck I tried 513 pit nothing my phone still wont boot up I still get the opening screen then it shuts off and starts again.
im really having a bad day now i tried flashing the stock rom 2.2 with odin now the phone wont even power on! i guess its really a brick. i bought myself a paper weight
Hello All,
First, let me say how much I've enjoyed reading this Forum and how much I LOVED my TMobile Samsung Vibrant 3G. While it worked for a long time running Froyo 2.2 with a Bionix Next-Gen V2 ROM, it was fantastic, but lately the microphone had been dying (I sounded more and more muffled no matter what I did). So I flashed up to ICS and installed Chimera to see if that might help. While the phone ran beautifully except for several apps that were rather wonky, I was getting more and more muffled.
So the other day I decided to restore my Nandroid backup, however when I flashed back I got stuck on the Vibrant boot screen. No matter what I do, I can't seem to get to Recovery.
How do I get back to Recovery from this? I have never used Odin, the only time I've ever hooked the phone up to the computer was when I originally flashed from Eclair to Froyo many moons ago. So please let me know if I'm missing something.
Any assistance would be greatly appreciated!
You made a mistake when you tried to restore a 2.2 based backup from ICS base ROM. Now you must Odin to stock, its not that hard. First you will need to download the Odin program. I'm assuming you have device drivers on your PC but double check. Next you need 2 files, the 512 pit and jfd firmware file. Once you have those files you need to get in download mode.
I will link a thread with files and directions. http://forum.xda-developers.com/showthread.php?p=9375927
I approve this message.
samsgun357 short and sweet as always
samsgun357 said:
You made a mistake when you tried to restore a 2.2 based backup from ICS base ROM. Now you must Odin to stock, its not that hard. First you will need to download the Odin program. I'm assuming you have device drivers on your PC but double check. Next you need 2 files, the 512 pit and jfd firmware file. Once you have those files you need to get in download mode.
I will link a thread with files and directions. http://forum.xda-developers.com/showthread.php?p=9375927
I approve this message.
Click to expand...
Click to collapse
OK I installed Odin and the necessary files and drivers, I plugged in the phone, but when I try to turn it on into Download Mode the Vibrant doesn't respond. There's just the little spinning light in the center of the screen. Odin doesn't recognize the phone either.
Anything else I can do?
Odin won't recognize unless you are in DL mode. I linked a video, I know it says captivate. Don't worry about the mod etc just follow it to get in download mode.
https://www.youtube.com/watch?v=qXMqLpnTPh0&feature=youtube_gdata_player
I approve this message.
If this won't play just search download mode vibrant on YouTube.
samsgun357 said:
Odin won't recognize unless you are in DL mode. I linked a video, I know it says captivate. Don't worry about the mod etc just follow it to get in download mode.
https://www.youtube.com/watch?v=qXMqLpnTPh0&feature=youtube_gdata_player
I approve this message.
If this won't play just search download mode vibrant on YouTube.
Click to expand...
Click to collapse
OK watched the video, but 2 things:
-when I try to boot into Recovery it gets stuck on the Vibrant Samsung initial splash screen and never moves, even when holding down the 3 buttons;
-this video assumes I can access the phone to install the fix or anything else. I can't, it just stays stuck in the splash screen;
-I tried holding down the 3 buttons and simultaneously plugging in the USB cable, and still nothing but the splash screen;
-is there any way to turn on the device while hooked into the computer so Odin or something else can use the necessary files to turn it on and make it accessible?
Thanks all for your patience and advice, it's much appreciated. I LOVE this little phone and really want to heal her!
Hi,
I think you have tried to go to recovery mode using 3 button combo. But in order to use ODIN device has to be in DOWNLOAD MODE which can be done using following steps
1)start off with phone turned off
2)press down volume up, and volume down at same time, and never let go until you get into download mode. DON'T touch the power button
3) while holding down both volume buttons get your usb cable which is connected to your computer
4)plug in the usb cable into your phone, while you still hold down both up/down volume buttons at same time. Don't touch the power button.
5)As soon as you plug your usb cable into your phone, the phone will instantly go into Download mode.
6)You may now release the volume buttons
Click to expand...
Click to collapse
hope this will help you to go on
tc
NOTE: here is a link I found. Just take a look http://www.ithinkdiff.com/how-to-access-download-and-recovery-mode-in-samsung-vibrant/
OK we are trying to get download mode not recovery. Your phone must be off for download mode. If it flashes vibrant screen you have gone to far and something is wrong. I specifically said pay no attention to the mod in video. Regardless I think you might need a jig to get in download mode.
I approve this message.
OK, noob error (smacks head), I kept saying Recovery Mode when what I needed was DL Mode, my sincerest apologies.
I got into DL Mode finally by holding down the Volume buttons (not the Power button), then plugging in the USB cable. The Vibrant promptly went into DL mode. Odin recognized the phone and off we went. It's now back to Stock Eclair (yuck).
So next question: am I rooted or do I have to do that all over again? And if so, what's the fastest way to do it so I can flash to the ROMs I knew and loved?
Lastly, a great big THANK YOU to samsgun357 & haarsh for all your assistance, you guys ROCK! :good:
No you are not rooted after using Odin to go back to stock. Glad you got it buddy! Now use this guide to get root and cwm recovery. Option b is probably what you want
http://forum.xda-developers.com/showthread.php?p=9375927
I approve this message.
Glad you are successfully ODINed and you are in perfect position to make things BETTER
Still the device is not rooted as samsgun357 said. but no worries it is a simple process to get rooted and go ahead. I will post an video and hope it will also ease up your task
tc and its a pleasure to help you
Happy Flashing :good:
Yep, got it rooted and flashed Cyanogen7, then flashed up to an ICS ROM (started with Chimera but it's a tad wonky so flashed over to Euphoria, we'll see how that goes).
That said, the microphone is still sounding very muffled, so I think it's a hardware issue. I was due for an upgrade anyway so I picked up the Samsung 4G Blaze (nice since the Vibrant I had was the 3G). So right now I'm just having fun exploring Android on the Vibrant while I read up on how to root and improve the Blaze.
I will miss this little phone though, it was light and super fast and agile, perfectly sized, especially compared to the mini-tablets coming out lately like the Samsung SIII and LG L9 or HTC One. I prefer smaller phones, so the Blaze fits the bill right now even though it's heavier than my old Vibrant.
Thanks again for everyone's assistance, VERY much appreciated! :good:
Hey guys,
I'm having the same problem w/ my phone (see img).
I can't get out of the little loading pinwheel.
I've tried all the prescribed methods in this thread.
Thoughts?
Sorry, also, I can't get to DL or the splash page. When I turn the phone on, it goes directly to the spinning pinwheel.
check this thread : http://forum.xda-developers.com/showthread.php?t=848737
Gingerbread Bootloaders
Key Maps
For Recovery - Lower Volume Key + Power Button
For Download - Upper Volume Key + Power Button
Froyo Bootloader
Key Maps
For Recovery - Both Volume Keys + Power Button
For Download - Both Volume Keys and Connect USB Cable
Click to expand...
Click to collapse
tc
hoss9009 said:
Sorry, also, I can't get to DL or the splash page. When I turn the phone on, it goes directly to the spinning pinwheel.
Click to expand...
Click to collapse
Download mode IS what you need to use Odin a get back to stock.
The above post shows the button combo for DL mode and recovery based on which bootloaders you're running (thanks haarsh). If you haven't flashed GB boots, you have froyo boots.
Now make sure you have the correct Odin files and drivers on your PC.
The goal here is to get power to the phone, while holding button combo, from the PC.
Do a battery pull/replace. Plug USB into computer
While holding your button combo (see above) plug the phone in.
Hopefully you see DL mode
Also try pulling battery, plug USB in PC and phone
While holding button combo, pop the battery back in.
This can be tricky sometimes so don't give up.
OK. Let me backup and give you more info.
So sorry...
I rooted, but was unable to download ROM manager from the Store (im assuming bc it was running Froyo).
I was able to get CMW to install via update.zip. Once installed the phone was going directly into recovery when asked (3 button method). It would go into the Anroid recovery, first and then from continually installing CMW, go into CMW.
From there i installed a CM10 nightly.
Install went fine, but no mobile data connection. I went back to CMW and restored the original ROM, rebooted and am stuck w/ the pinwheel.
I can't get into to download mode AT ALL. I've tried the various button methods with no luck.
From what I did, I can assume that 2.1 IS installed on the phone.
Thoughts?
Thank you so much for the help.
Well the issue you have was caused by going back to a 2.1 or 2.2 build from cm10 through cwm. You should have used Odin to get back to stock.
If you can't get in DL mode manually you will need to buy a DL jig. You can get them from www.mobiletechvideos.com also from amazon I think. You can also make one yourself, just search USB download jig, you should find it.
Sent from my SGH-T959 using xda premium
samsgun357 said:
Well the issue you have was caused by going back to a 2.1 or 2.2 build from cm10 through cwm. You should have used Odin to get back to stock.
If you can't get in DL mode manually you will need to buy a DL jig. You can get them from www.mobiletechvideos.com also from amazon I think. You can also make one yourself, just search USB download jig, you should find it.
Sent from my SGH-T959 using xda premium
Click to expand...
Click to collapse
Ok.. nothing at against your advice, but do they really work?
Yes they do. Look them up, I'm sure there are testimonials.
Sent from my SGH-T959 using xda premium