I keep trying to uninstall hspl3 but it wont let me
i download the rom from the htc website and get the nbh file out of it, chance the name and then pu it on my formatted fat32 8gb sd card. but when i put it on my hd2 it gets stuck at the muliti coloured screen with serial on it.
PLEASE HELP
try smaller sd card. fair few people reported 8gb not working.
alternatively run hspl and choose your stock spl from there.
That worked
samsamuel said:
alternatively run hspl and choose your stock spl from there.
Click to expand...
Click to collapse
Reran the setup for HSPL3 and was able to uninstall as suggested.
How to get SPL 1.42
samsamuel said:
try smaller sd card. fair few people reported 8gb not working.
alternatively run hspl and choose your stock spl from there.
Click to expand...
Click to collapse
When I run HSPL3 again I can only choose 2.08 spl and I wanted to get back to the original 1.42 spl - any hints?
The reason is because I want to install the new official 3.14 rom from HTC and I've read that this is not so good with HSPL3 on the phone.
dan_p said:
When I run HSPL3 again I can only choose 2.08 spl and I wanted to get back to the original 1.42 spl - any hints?
The reason is because I want to install the new official 3.14 rom from HTC and I've read that this is not so good with HSPL3 on the phone.
Click to expand...
Click to collapse
The 2.08 SPL is also an official/original SPL version (don't choose SPL2.08 HSPL!!).
If you have 2.08 SPL, you can also upgrade safely to the new 3.14 ROM.
Grtz,
Degake
degake said:
The 2.08 SPL is also an official/original SPL version (don't choose SPL2.08 HSPL!!).
If you have 2.08 SPL, you can also upgrade safely to the new 3.14 ROM.
Grtz,
Degake
Click to expand...
Click to collapse
Thanks.
But can I, after I've used HSPL3 to install SPL 2.08, install an old official 1.66 rom with SPL 1.42? and will this remove HSPL3 and return my phone to SPL 1.42?
I asking because I've read on this great site, that the new rom 3.14 uses spl 3.03 and it's incompatible with spl 2.08 as well as with HSPL3?
dan_p said:
Thanks.
But can I, after I've used HSPL3 to install SPL 2.08, install an old official 1.66 rom with SPL 1.42? and will this remove HSPL3 and return my phone to SPL 1.42?
Click to expand...
Click to collapse
depends how you flash it, , over usb, hspl will remain, via sd card, hspl will be removed. You can also do it by running hspl2 and choosing 1.42.0000, no need to flash anything
I asking because I've read on this great site, that the new rom 3.14 uses spl 3.03 and it's incompatible with spl 2.08 as well as with HSPL3?
Click to expand...
Click to collapse
correct, you would show only 50 meg ram (I believe, i havent tried it yet, gonna wait till hspl or my carier version of 3.x comes out)
samsamuel said:
depends how you flash it, , over usb, hspl will remain, via sd card, hspl will be removed. You can also do it by running hspl2 and choosing 1.42.0000, no need to flash anything
Click to expand...
Click to collapse
Already tried to flash official 1.66 rom via sd card, but was unsuccesfull - no errors but nothing happened - didn't remove hspl3.
Can I use hspl2 on the phone eventhough I already used HSPL3?
sorry for all the noob questions!
dan_p said:
Already tried to flash official 1.66 rom via sd card, but was unsuccesfull - no errors but nothing happened - didn't remove hspl3.
Click to expand...
Click to collapse
strange, , freshly formatted fat32 sd card smaller than 8gb, correct?
Can I use hspl2 on the phone eventhough I already used HSPL3?
Click to expand...
Click to collapse
sure, the actual 2.08 spl/hspl contained in hspl3 is exactly the same as in hspl2, only difference is that hspl2 is more versatile (more spl/hspl options) and hspl3 supports telstra and tmous phones.
For regular hd2 users, hspl2 is the better option.
(Plus hspl2 detects what you currently have running, and offers you the opposite, so if it detects spl 1.66.0000 it defaults to offering you 1.66.hspl.
hspl3 on the other hand always offers you 2.08.0000 and many MANY noobs have just simply hit 'go' without changing the dropdown and then think they now have hspl installed, and they dont, causing much confusion and hundreds of 'oh my god it doesnt work' posts.)
samsamuel said:
strange, , freshly formatted fat32 sd card smaller than 8gb, correct?
Click to expand...
Click to collapse
Yes freshly formatted fat32 1gb card - and nothing. But I have the spl 2.08 hspl and not the spl 2.08 on the phone. Perhaps thats the reason?
I'll try and find the hspl 2 and see if I can change to spl 1.42 that way and then I'll install old stock rom 1.66 via sd to remove hspl and then upgrade to the new 3.14 rom.
Does this sound like an ok approach?
dan_p said:
I'll try and find the hspl 2 and see if I can change to spl 1.42 that way and then I'll install old stock rom 1.66 via sd to remove hspl and then upgrade to the new 3.14 rom.
Click to expand...
Click to collapse
if hspl has been removed you don't need to flash from sd card. the spl will be updated by normal usb flash. only need to use sd card if hspl is still installed.
just flashed mine.......great
I am having the same problem HSPL 2.08 and trying to flash from a FAT 32 2GB SD card with Stock rom 3.14 (LEOIMG.NBH) and I get to the grey screen saying loading and it just stays there.
Any advice?
I put on HSPL 2.08 (though Bootloader just reads 2.08).
Will try tnad flash to 1.42 using HSPL and see if I have any luck.
it doesn't "just read 2.08" it reads either 2.08.0000 or 2.08.hspl, there's a huge difference.
also, if you need hspl because there isn't a stock 3.14 for your phone, you should know that
o sdcard i that nstall 3.14 it won't flash anyway. (step one of sd card flashing is the spl gets updated to 3.03, second it checks the cid and region, finds they don't match, and you get rom upgrade code error.
if you use hspl to customruu install 3.14 it will install and run but be very buggy and only 60mb free ram because spl isn't 3.03.
Ok so I flashed my device to 2.08.hspl - 3.14 then installed happy days.
Not content I decided to run task29 then install 3.14 off the SD card. It got have way through and errored. It changed my SPL from 2.08.hspl to 3.03.0000 but gave a wrong ROM code error please try again.
I think I need to put on the stock rom (it's a stock HTC phone) but it wont accept the 3.14 I have nor the 1.48 I have downloaded.
I try to download 3.14 off the HTC software support site but it tells me that software is'nt for my phone?! it's a late 2010 model (got it mid nov 2010 already had 3.14 when I got it.)
I tried to revert it back to 2.08.hspl but HSPL3 wont recognise the SPL.
Any ideas?
YOU CANNOT INSTALL 3.14 USING HSPL - YOU GET LOW MEMORY AND UNSTABLE PHONE.
you now need to flash back to a correct stock rom. usb is fine, no need for sd card.
Thanks,
I've figured as much but when I try to install the correct stock rom (3.14.405.2 unbranded WWE) it wont load up!
Just does 1% then goes to the software update failed please try again.
so basically my question is what is the correct stock rom for me? because the Stock 3.14 and Stock 1.48 file I downloaded neither work!
Message on bootloader screen as follows -
RUUNBH
PB81100 SS-BC
SPL-3.03.0000 XE
MicroP (LED) 0x05
MicroP(Touch) 0x05
Upgrade ROM Code Error
Please Try again
Just spoke with HTC informed I have a Swiss device!!!! so basically Exspansys sent me a swiss device with WWE 3.14 rom how the hell did they do that or why even?! any way i degress.
Installing the German 3.14 rom now seems to be working will then enternain thenotion of switching languages using goldcard....cherrs for your help.
no need for goldcard.
you already have spl 3.03.0000 from the german rom so just use SSPL to flash.
Tried 3.14 WWE using SSPL_RUU
It gives the usual 00028002 erorr (or 294 Invalid Vendor ID)
I was under the impression now I have a German HD2 with the correct German 3.14 rom with the correct 3.03 SPL I cant flash any other roms with out going down the HSPL route (which cannot be done correctly with 3.03 any way)
I want the stock WWE 3.14 rom and it looks like the only way is the goldcard method? Unless you have any ideas?!?!!?!?
Cheers
Related
if im in the us where can i find this version to down load it. i cant track it down on htc support.
spl comes as part of stock roms.
assuming you have a tmous?
if so, any rom that includes 1.42.0000 spl will brick your phone permanently.
care to give more detail what you are trying to achieve, including your phone model?
i have the htc hd2
screen after teh volume reset is
PB81120 SS-B3
SPL-2.10.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
its how i have it since i bought it i havent done the update that has been released by t-mobile yet. Id like to get it to where i can flash other roms on it but its at 2.10.0000 and of course wehn i run the program to put HSPL on there it tells me i need first SPL 1.42.0000. any advice would help
i think there are different hspl designed for each spl is
okay, take carefull note of this
you have a 'tmous' or 't mobile us' version of the hd2.
This is important, you WILL kill your phone if you try to flash ANY official rom other than those for the tmous.
You don't need spl 1.42.0000, you need spl 2.08.0000, and that will allow you to use hspl1024 (see in my sig)
go to '[ROM]Leo 1.5 T-MOBILE Test & Stock ROMS' thread in the tmous rom development thread,
find and download rom 2.10.0
connect to usb, run the .exe, let it install, and voila, , , your spl is now 2.08.0000 and hspl1024 will now work.
You are currently in the regular hd2 section, you do not have a regular hd2, you should bookmark THIS and do all your rom finding, etc. there.
Apps, and themes from teh regular hd2 section will work fine on your tmous, but not roms, and especially not radios.
When picking a rom, be sure that the chef has marked it as 'tmous compatible'. If you aren't sure, don't bother.
all is good
i think i made a huge mistake..anyway i'm a noob (still)...so this is my story:
i flashed succesfully wp7 on my hd2 ..so i didn't liked it and i decided to go back on wm6.5 and flashed with a stock rom with 1.42 spl...
now i'm trying again to flash hspl so i can have a cooked rom like before but it gives me an error...it says that i need spl 1.42 in order to do that...but when i flashed the stock rom the spl remained 2.08 and it looks like this:
spl-2.08.hspl 8g XE
cotulla HSPL 0x05 0x40
can anyone help me?
now i made it with hspl2. i have spl 1.42 hspl but i can't flash a custom rom or radio :error code 240?
fix robotic voice running android 2.2 via sd card.
running andriod 2.2 via sd seemed to work ok apart from the robotic voice during calls i'm led to believe that you need to change the radio version which opened up whole new kettle of fish
Tried to install HSPL, which it wont because it requires spl version 1.42 to install HSPL
Can anyone shed any light on how this is done without bricking the phone permanently? or is there a better way to ultimately run android 2.2 from the sd card.
current spec
os 5.2.21913
rom 3.14.405.2
radio 2.15.50.14
spl -3.03.0000
any feedback much appreciated.
barryhd2 said:
Tried to install HSPL, which it wont because it requires spl version 1.42 to install HSPL
Click to expand...
Click to collapse
that version of hspl went out of date ten months ago. use hspl2 which works with any spl.
barryhd2 said:
Tried to install HSPL, which it wont because it requires spl version 1.42 to install HSPL
Click to expand...
Click to collapse
that version of hspl went out of date ten months ago. use hspl2 (download from teh same hspl thread, the link directly underneath the one you downloaded.) which works with any spl except 3.03.0000
Hi i had my hd2 repaired by htc now the spl is spl3.03.0000
so the question is which hspl do i put on as i really am not sure thanks
anubis1126 said:
Hi i had my hd2 repaired by htc now the spl is spl3.03.0000
so the question is which hspl do i put on as i really am not sure thanks
Click to expand...
Click to collapse
There is no HSPL version present yet who is compatible with SPL 3.03
We need to wait sir
Ow Ps, do you have a Branded UK Orange device?
no its unbranded
Any updates on hspl for this yet
if its unbranded just flash a stock 1.66 to downgrade the spl then hspl as before.
Hi. I am on 3.14, i would need to downgrade too...
would this file i found online be good? :
RUU_Leo_HTC_NLD_1.66.404.1_Radio_Signed_15.30.50.0 ΒΆ
7U_2.06.51.07_Ship
Its 1.66.404.1 but not 1.66.0000.. is this a problem?
I need to find a stock rom on NLD (dutch) to downgrade before putting my HSPL... Why is it so hard to find an original file from factory, say 1.42 in everylanguage?
And what is the difference by downgrading to 1.42 or 1.66?
Thank you kind sirs
1.66.404.1 is rom version,,, 1.66.0000 is the spl version.
yes that rom should be fine assuming you have an unbranded hd2. doesn't matter which you downgrade to, they both will allow hspl.
its not at all difficult to find them.
look for "leo official roms" thread, in rom development section, and in there, first post first link takes you to most of the roms.
Samsamuel, thx a lot for that positive answer HD2 is indeed unbranded.
makes me feel better, been in despair with my dutch HD2...
So its finally clearer to me, 0000 is SPL and XXX is rom version
But to Downgrade, a non SPL version is ok then?
But to install HSPL, i need an SPL version?
And one last thing, can i install all of this stuff without booting from SDmini?
Those were the old procedures, no?
Thx!
all stock roms come with a version of spl, but it doesn't say which spl in the filename.
1.43 and 1.48 roms come with spl 1.42.0000
1.66 and 1.72 roms have spl 1.66.0000
3.14 comes with spl 3.03.0000 and hspl doesn't work with it.
the numbers you see in the filename are rom (1.66.404.1) and radio (2.06.51.07) versions, not spl.
when you look in bootloader at spl, it will always end either .0000 or .hspl where 0000 is stock.
it doesn't matter which spl you have, so long as it isn't spl 3.03 then hspl will work and allow you to flash roms andradios.
Thx! Even clearer now
Unfortunately, i am currently on 3.14.. i tried installing a lower version ROM (1.66, the link i put earlier) but it didnt work..
How can i downgrade to those versions who enable me to use HSPL? Once u have a higher rom, it detects lower and u cant downgrade?
Is the only method to flash with SDcard?
zewill said:
i tried installing a lower version ROM (1.66, the link i put earlier) but it didnt work..
Click to expand...
Click to collapse
Then that isn't your stock rom. (Although you didnt say why it didnt work, , ) if its teh right rom it will work
I think i managed to install my English pack allright!
I installed the earliest official pack from HTC, rom 1.48
Then installed HSPL3, then my official HTC WWE 3.14 rom!
Confirmed, it works!!!
Again, Thank you for your time and your explanations of roms!
See you around on the forums, mate!
dont smile too soon, if you flashed a 3.14 rom whilst spl is installed then you will have memory and stability issues.
Go to
settings menu all settings system memory, what does it show for free program memory? around 50meg? should be about 140.
Couldnt really find "memory settings" but what if ound was this:
Total storage: 176 mb
Used storage 56
Free storage 119 mb
TOtal programm 208 MB
Used program 163 mb
free programm 45 mb
NO SD CARD (must buy one tomorrow lol)
So, as u said, its around 40 mb.. What should have i done better?
Also, what is the difference in the SPL?
I mean, from factory settings, i upgraded to 3.14.
With HSPL, i upgraded to 3.14
What difference does it make, isnt it the same? Doesnt 3.03 spl install itself?
Anyways, will be glad to hear your comments on my new problem then haha
not through usb flash. If hspl is installed it remains installed.
3.14 roms must have spl 3.03.0000
Before the 3.14 roms it didnt matter, all roms worked on any version spl, but the 3.14 roms dont.
You should have removed hspl first, (so that your spl ends .0000) then flashed the 3.14 rom, , this allows it to upgrade spl to 3.03.0000
Hhm, i really dont wanna brick my HD2 with all those stability issues.. is there a risk if i leave it like that?
Anyways, i'll restart the instalations then. I checked on bootloader, currently this is what i have: SPL-2.08 HSPL 8G XE
How should i proceed? Should i flash from SD card a 3.14 directly WWE? I have nothing yet on my HD2, (using 3.14 WWE official rom from HTC website) so i dont really care about flashing, reinstalling, hard resets
Just give me advice on how to proceed to have the perfect installation
Is a flash from SD card obligatory? But that would get rid of HSPL, no? and if i get rid of HSPL, my HD2 is going to go back to its original language (DUTCH), right? I want to avoid putting my HD2 in that language...
Say, if i SDFLASH the latest rom WWE (even though my HD2 previously to HSPL only accepted NLD (hence dutch) roms), will it work?
Sorry for taking up so much of ur time, but ur comments are so helpful
connect to usb, put the phone in bootloader.
then
run hspl2
choose 1.66.0000
when phone reboots, quickly hold voldown to reenter bootloader
run the 3.14.exe
Thx for the quick reply.
Why would i use HSPL 2 now, i was using the HSPL 3 before? Isnt it the latest most stable one tu use?
Can i still run HSPL3 and choose 1.66? (i think not actually i only had choice of 2.08)..
So can i run HSPL3 and then re run with HSPL2??? It wont have compatibility issues?
And how to install the exe while in bootloader? Is it a flash from SD Card?
What will happen if i leave my 3.14 in the 2.08 SPL? only stability issues? No risk of bricking, or long term affecting negatively the phone?
So many questions.. hope u can answer all of them..
Also, one last big question: Now that HSPL is installed, isnt it easier to simply, when i recieve my SD card, to flash a WWE official rom 3.14? wouldnt that do the trick? Or i need to go through HSPL2 for sure?
Thx again!
the .exe's are just installers, the spl/hspl inside is the same. So, the 2.08.hspl in hspl3, the actual code that gets flashed to your bootloader, is IDENTICAL to 2.08.hspl in hspl2.
But, hspl3 only has 2.08.0000 and 2.08.hspl as options, but since spl 2.08 isn't stock for your phone, if you ever needed to get back to stock, you can do that with hspl2, but not hspl3, so since the one version of spl/hspl that they both contain (2.08) is teh same, and hspl2 has extra options for a non tmous user, why use hspl3? there is no reason.
Oh, and whilst we're at it, hspl2 detects which spl you currently have and offers you the opposite (so if it finds 1.42.0000 it sets the dropdown to 1.42.hspl)
HSPL3 doesnt do this, it always offers you 2.08.0000 until you manually change it, and many a newb has just clicked OK and thinks they have installed hspl, when in fact they haven't.
Lol, i be one of the many noobs.. But in my bootloader, it says i have installed HSPL, so.. i guess its installed!
Will follow your recommendations, but just one last thing
How to remove this current HSPL3 then and restart the steps with HSPL2? You said that
"But, hspl3 only has 2.08.0000 and 2.08.hspl as options, but since spl 2.08 isn't stock for your phone, if you ever needed to get back to stock, you can do that with hspl2, but not hspl3, so since the one version of spl/hspl that they both contain (2.08) is teh same, and hspl2 has extra options for a non tmous user, why use hspl3? there is no reason"
I used HSPL3 because i read on forums thats its better to use the latest HSPL as the previous versions usually are out of date.. seems i was mistaken then... Also, i used HSPL3 because it was compatible with any 1.XX rom, and i could only downgrade as low as 1.48. Would HSPL2 be able to be installed on 1.48 official rom? I thought highest HSPL2 could work on was 1.42?
So you say that now that i have installed HSPL3, i cannot go back to stock? Im sure there would be a way, but what should i do then?
Should i just flash some stock rom from SD card, hoping it takes HSPL3 away, and restart procedure with HSPL2?
Or with USB sync i can restart the procedure, by just openiong HSPL2 without touching any rom?
Hi all, I've been running HSPL and Stock ROM 3.14.405.2 on my UK T-Mobile HD2. I needed HSPL as its a generic ROM.
I decided to try a cooked ROM (Artemis), which required the removal of HSPL. I extracted "RUU_signed.nbh" from the 3.14 ROM, renamed it to "leoimg.nbh" and stuck it on my SD Card, before resetting and pressing the down volume. It rebooted, asked if i wanted to continue with the installation, and then reset halfway through.
I'm now getting "Upgrade ROM code error. Please Try Again" and sometimes a grey screen with red numbers "00028002" at the top.
I've tried installing a standard 3.14 ROM again, and a 1.66 ROM, but both say they are unable to communicate to the phone.
Any ideas would be greatly appreciated please - I'm gonna have to crack out my Nokia N70 back up soon!!
What haoppened is that when you ran the 3.14 update from sd card, because HSPl was installed it allowed it to start flashing even though its not for your phone. (As hspl should indeed do).
Problem is that step 1 of the update process is to replace the spl(hspl) and instal spl 3.03.0000. The phone then reboots into the new 3.03.0000 bootloader and flashing continues. Except it doesn't, because hspl is no longer there, so your phone rejects the 3.14 rom and you get rom update error and are left with spl 3.03.0000 and no way to apply a 3.14 rom.
Had you tried to flash that rom without hspl, it would have simply failed and done nothing.
The 1.66 rom didnt work because it is an unbranded rom, and you have a branded phone.
You need a t mo uk rom, and you dont need to use sd card, you can flash over usb from bootloader and it will downgrade spl from 3.03.0000 and hspl2 will again work.
Only way, the ONLY way, you can get a 3.14 rom onto your branded hd2 is goldcard. running it as you did with hspl causes instability and only 200 and odd meg ram, with only 50 meg free.
if you would read the install instructions on the first post of the Artemis ROM;
1) you didn't need this thread.
2) you saw the step by step guide on how to do it (available in 3 language!!)
samsamuel said:
What haoppened is that when you ran the 3.14 update from sd card, because HSPl was installed it allowed it to start flashing even though its not for your phone. (As hspl should indeed do).
Problem is that step 1 of the update process is to replace the spl(hspl) and instal spl 3.03.0000. The phone then reboots into the new 3.03.0000 bootloader and flashing continues. Except it doesn't, because hspl is no longer there, so your phone rejects the 3.14 rom and you get rom update error and are left with spl 3.03.0000 and no way to apply a 3.14 rom.
Had you tried to flash that rom without hspl, it would have simply failed and done nothing.
The 1.66 rom didnt work because it is an unbranded rom, and you have a branded phone.
You need a t mo uk rom, and you dont need to use sd card, you can flash over usb from bootloader and it will downgrade spl from 3.03.0000 and hspl2 will again work.
Only way, the ONLY way, you can get a 3.14 rom onto your branded hd2 is goldcard. running it as you did with hspl causes instability and only 200 and odd meg ram, with only 50 meg free.
Click to expand...
Click to collapse
Thanks for the response - I thought something along those lines had happened, so I've gotten TMobile 1.72 from the HTC site.
Ive extraced RUU_signed and renamed it to leoimg, and stuck it on the SD Card. My problem is now, when i boot with the volume held down, It just says "Upgrade ROM code error. Please Try Again" still. It doesnt seem to boot from the SD. Am i missing something or is it totally ballsed?
EDIT: After formatting a different card and trying again, it's working. Wiping now....
As for this goldcard stuff, i assume there's plenty of threads to do that?
samsamuel said:
......Only way, the ONLY way, you can get a 3.14 rom onto your branded hd2 is goldcard. running it as you did with hspl causes instability and only 200 and odd meg ram, with only 50 meg free.
Click to expand...
Click to collapse
Ahhhhhh, that'd explain why performance with 3.14 has been totally rubbish. I had no idea hspl had an overhead like that. Goldcard it is then......if i ever get it working
its not hspl with the overhead, its an incompatibility between the rom and the spl. If you put 3.14 rom on there and then remove hspl leaving say 1.66.0000, you still get the same issues.
As for goldcard, theres a goldcard request thread in rom dev section, post a cid there and ill make a batch of images up later this evening.
samsamuel said:
its not hspl with the overhead, its an incompatibility between the rom and the spl. If you put 3.14 rom on there and then remove hspl leaving say 1.66.0000, you still get the same issues.
As for goldcard, theres a goldcard request thread in rom dev section, post a cid there and ill make a batch of images up later this evening.
Click to expand...
Click to collapse
I see, got it now. I've posted on there earlier, so i look forward to your help. Thanks a lot
kurt-willems said:
if you would read the install instructions on the first post of the Artemis ROM;
1) you didn't need this thread.
2) you saw the step by step guide on how to do it (available in 3 language!!)
Click to expand...
Click to collapse
All valid points, but not very helpful seeing as this is a thread requesting.....help.
hi
i am unable to un-install hspl through sd card, using LEOIMG.nbh (extracted form branded ROM), HD2 doesn't go any further than boot-loader screen, i can install ROMs but seems like not possible to remove hspl, any idea please how to install branded ROM?
i tried energy rom that didnt boot however when i installed Dutty V13 it worked and before that I was running android style Faith OttoMan ROM.
now phone is working fine however I want to remove HSPL 2.08 (so called hspl3) and install Branded ROM?
any suggestions?
netvpn7 said:
hi
i am unable to un-install hspl through sd card, using LEOIMG.nbh (extracted form branded ROM), HD2 doesn't go any further than boot-loader screen, i can install ROMs but seems like not possible to remove hspl, any idea please how to install branded ROM?
i tried energy rom that didnt boot however when i installed Dutty V13 it worked and before that I was running android style Faith OttoMan ROM.
now phone is working fine however I want to remove HSPL 2.08 (so called hspl3) and install Branded ROM?
any suggestions?
Click to expand...
Click to collapse
Did you try with HSPL2_RUN.exe to remove you're HSPL? I mean with this application you can also shoos to set a spl version instead of hspl.
kurt-willems said:
Did you try with HSPL2_RUN.exe to remove you're HSPL? I mean with this application you can also shoos to set a spl version instead of hspl.
Click to expand...
Click to collapse
did you mean when you choose 2.08 and there is drop down for spl 0.00 something like this?
only choose 2.08.0000 if you have a tmous.
If you have a regular hd2 run hspl2 (hspl3 isn't 'better' than hspl2, hspl3 just has less options) then choose 1.66.0000
samsamuel said:
only choose 2.08.0000 if you have a tmous.
If you have a regular hd2 run hspl2 (hspl3 isn't 'better' than hspl2, hspl3 just has less options) then choose 1.66.0000
Click to expand...
Click to collapse
thanks for the tip, i managed to install 1.66.0000 but after that it does not read from sd card through LEOIMG.nbh, if I install it normal way should it work? through msactive sync..
netvpn7 said:
thanks for the tip, i managed to install 1.66.0000 but after that it does not read from sd card through LEOIMG.nbh, if I install it normal way should it work? through msactive sync..
Click to expand...
Click to collapse
Yes sir you can flash stock ROM over ActiveSync.
kurt-willems said:
Yes sir you can flash stock ROM over ActiveSync.
Click to expand...
Click to collapse
many thanks for your help, it means the 1.66.0000 is the default spl that comes with branded ROM??? and it does not violate the warranty issues?
regards
any spl that ends 0000 is stock and warranty is valid.
as for sd card, is it a 4gb or bigger card? if so, thats why it doesnt work. best results use a 2gb card.
samsamuel said:
any spl that ends 0000 is stock and warranty is valid.
as for sd card, is it a 4gb or bigger card? if so, thats why it doesnt work. best results use a 2gb card.
Click to expand...
Click to collapse
thanks for confirming, i am using 2gb card.
on my current ROM am keep getting low phone memory errors now, even i install a fresh ROM i get the same error msg..?any help
Finally 8Gb Card worked instead of 2gb..through sd card. all done.
Thank to you all
netvpn7 said:
thanks for confirming, i am using 2gb card.
on my current ROM am keep getting low phone memory errors now, even i install a fresh ROM i get the same error msg..?any help
Click to expand...
Click to collapse
I suppose you have installed stock ROM 3.14.
Can you communicate us the SPL/HSPL value that you see on the bootscreen.
issue getting worse ?
kurt-willems said:
I suppose you have installed stock ROM 3.14.
Can you communicate us the SPL/HSPL value that you see on the bootscreen.
Click to expand...
Click to collapse
oohh noo...another problem, I managed to install LEOIMG.nbh through sd card but now it wont boot and STUCK on HTC Logo, then to get it working I installed dutty v13 ROM that worked without any problem? couldnt understand how and why as where LEOIMG.nbh was installed without any error..
now I am on hspl 2.08
dutty v13 ROM
2.15.50
after fresh install phone memory is 11.30mb???
another thing i noticed when i installed dutty v13 the custom ruu.exe shows no ROM previously installed but when I click upgrade/update then it shows dutty v13 will be installed..i dont know why it didnt shown me the branded ROM installed already like 1.72 etc.. I hope you understand what I mean.
I tried to install Energy latest ROm as well that didnt boot either, only Dutty works??
Please guide me what to do?
Regards
it doesn't show the previous rom info if you put the phone in bootloader yourself before running customruu. this is because the "upgrade from" info gets taken from the registry which it can't do when the phone is in bootloader. its nothing to worry about.
samsamuel said:
it doesn't show the previous rom info if you put the phone in bootloader yourself before running customruu. This is because the "upgrade from" info gets taken from the registry which it can't do when the phone is in bootloader. Its nothing to worry about.
Click to expand...
Click to collapse
but how can i downgrade to branded rom please, it wont boot if i install
also i just installed artemis 48.1 and phone memory is 11.30 mb available?
You keep on saying that it is a branded phone - to whom is it branded (O2, Vodafone, etc) and which country?
the 1.66 ROM is the HTC unbranded version. 1.72 ROMs are the branded versions (except for the T-Mobile USA versions).
Boot up into BootLoader (Press and Hold the Volume Down button then tap the Power button); tell us what it says on the coloured screen.
netvpn7 said:
but how can i downgrade to branded rom please, it wont boot if i install
also i just installed artemis 48.1 and phone memory is 11.30 mb available?
Click to expand...
Click to collapse
Sir the problem of small available memory is mostly cause to the combination of stock ROM 3.14 and HSPL.
So remove your HSPL before installing stock ROM 3.14
fred_up said:
You keep on saying that it is a branded phone - to whom is it branded (O2, Vodafone, etc) and which country?
the 1.66 ROM is the HTC unbranded version. 1.72 ROMs are the branded versions (except for the T-Mobile USA versions).
Boot up into BootLoader (Press and Hold the Volume Down button then tap the Power button); tell us what it says on the coloured screen.
Click to expand...
Click to collapse
hspl 2.08 was installed when I was using Dutty V13 on HD2 however to install Artemis 48.1 I used SSPL so now my boot loader screen shows 1.42.6666 etc.
I tried to flash with SD card to put Branded ROM 02 1.72 that didnt boot and stuck on HTC Logo..
kurt-willems said:
Sir the problem of small available memory is mostly cause to the combination of stock ROM 3.14 and HSPL.
So remove your HSPL before installing stock ROM 3.14
Click to expand...
Click to collapse
i think my stock o2 rom is 1.72 and they not yet released 3.14, you think this could be the reason I am unable to downgrade to stock ROM from 3.14 and that's why only Dutty ROM works with HSPL 2.08 and Artemis with SSPL 1.42.666 etc..
netvpn7 said:
i think my stock o2 rom is 1.72 and they not yet released 3.14, you think this could be the reason I am unable to downgrade to stock ROM from 3.14 and that's why only Dutty ROM works with HSPL 2.08 and Artemis with SSPL 1.42.666 etc..
Click to expand...
Click to collapse
O2 users who will like to use a 3.14 stock ROM need to use the GoldCard technique.
netvpn7 said:
hspl 2.08 was installed when I was using Dutty V13 on HD2 however to install Artemis 48.1 I used SSPL so now my boot loader screen shows 1.42.6666 etc.
I tried to flash with SD card to put Branded ROM 02 1.72 that didnt boot and stuck on HTC Logo..
Click to expand...
Click to collapse
To go from your allowed 1.72 ROM or HSPL'd Dutty V13 ROM to Artemis 48.1 ROM, then you need to remove the HSPL (use HSPL2 and change SPL to 1.66.0000) and then READ the Artemis ROM thread.
You can only use Gold Card method to get Artemis 48.1 ROM flashing. SSPL is only used if you already have a Artemis 4X.X ROM or another 3.14 ROM already running.
netvpn7 said:
SSPL so now my boot loader screen shows 1.42.6666
Click to expand...
Click to collapse
for info the spl only shows 1.42.6666 for one reboot cycle. once you reboot the phone, the spl returns to what it was before.
Hi,
I looked the forum up and down, but can't find my answer.
So here my Q.
I had HSPL2.
After I installed the official ROM 3.14NL I started having memory problems.
I switched to SPL 2.08.
Still the same problem.
Do I have to reinstall the ROM 3.14?
It seems I need to have the SPL 3.03.0000?
Will it go automaticly to SPL 3.03.0000 with the reinstall?
Thanks.
Shadow62 said:
Hi,
I looked the forum up and down, but can't find my answer.
So here my Q.
I had HSPL2.
After I installed the official ROM 3.14NL I started having memory problems.
I switched to SPL 2.08.
Still the same problem.
Do I have to reinstall the ROM 3.14?
It seems I need to have the SPL 3.03.0000?
Will it go automaticly to SPL 3.03.0000 with the reinstall?
Thanks.
Click to expand...
Click to collapse
Yes; reinstall Stock ROM 3.14
The problems you mention are normal; Stock ROM 3.14 isn't compatible with HSPL and it needs SPL 3.03 (the original from stock ROM 3.14)
kurt-willems said:
Yes; reinstall Stock ROM 3.14
The problems you mention are normal; Stock ROM 3.14 isn't compatible with HSPL and it needs SPL 3.03 (the original from stock ROM 3.14)
Click to expand...
Click to collapse
Hi, thanks for your quick answer.
I'm now trying to update (reinstall) the 3.14 stock ROM.
However, the install procedure begins and holds at 0%.
So it does not start the update.
What can I do to resolve this problem?
Thanks.
Shadow62 said:
Hi, thanks for your quick answer.
I'm now trying to update (reinstall) the 3.14 stock ROM.
However, the install procedure begins and holds at 0%.
So it does not start the update.
What can I do to resolve this problem?
Thanks.
Click to expand...
Click to collapse
Using the right stock ROM.
Go to the HTC webpage and download with your S/N the stock ROM. and use this.
The problem would probably be do to a non compatible stock ROM.
And flash it then over SD; here you have the steps.
1) Download the correct Stock ROM from the HTC Webpage by using your S/N. (you will get a RUU_Leo_xxx_x.XX.xxx.x_Radio_xx.xx.xx.xU_x.xx.xx.x_LEO_Ship file.)
2) Right click on the RUU_Leo_xxx_x.XX.xxx.x_Radio_xx.xx.xx.xU_x.xx.xx.x_LEO_Ship file and select extract with 7Zip/WinZip
3) Prepared your SD-card (use a 2 or 4GB SD no bigger) and format it by FAT32
4)Take the "RUU_signed.nbh" from it and copy it to SD card.
5) Rename the "RUU_signed.nbh" to "leoimg.nbh"
6) Reset the device while pressing the volume down button
7) Follow the instructions mention on your device screen
Click to expand...
Click to collapse
Thanks again for your quickness.
But when I want to get my 3.14 on the HD2 it now says "Ongeldige verkoper-ID" - "Invalid Vendor-ID"
I don't understand, I had the 3.14 on the HD2.
It only did not have the SPL 3.03.0000.
?ow I have the SPL 1.66.0000
So, what do I have dto do now?
Sorry.
Shadow62 said:
Thanks again for your quickness.
But when I want to get my 3.14 on the HD2 it now says "Ongeldige verkoper-ID" - "Invalid Vendor-ID"
I don't understand, I had the 3.14 on the HD2.
It only did not have the SPL 3.03.0000.
?ow I have the SPL 1.66.0000
So, what do I have dto do now?
Sorry.
Click to expand...
Click to collapse
The "Ongeldige verkoper-ID" is the error that say's you that you are trying to install a stock ROM that don't match your device.
Mostly because peoples have a branded device and are trying to install a normal stock ROM.
Did you use your (not from someone els) S/N to download the stock ROM from the HTC Webpage?
Nope, used the Netherlands S/N from XDA Developers.
Bought the phone in Germany, and there was allready a HSPL on it.
Not sure wich ROM originaly was on it.
Think I'm going back to Stock ROM 1.66.
Worked fine.
Strange that I could replace it by 3.14 though.
But of course the SPL did not change to 3.03
Shadow62 said:
Nope, used the Netherlands S/N from XDA Developers.
Bought the phone in Germany, and there was allready a HSPL on it.
Not sure wich ROM originaly was on it.
Think I'm going back to Stock ROM 1.66.
Worked fine.
Strange that I could replace it by 3.14 though.
But of course the SPL did not change to 3.03
Click to expand...
Click to collapse
That's the problem sir. Your device is a originally German Device.
Like I mention before for Stock ROM 3.14 you can't use HSPL and you need to use YOUR S/N to download/install the correct 3.14 stock ROM.
Ons you have install the right/correct stock ROM (German version in your case) than extract the NLD 3.14 stock rom and use the RUU_signed.nbh from the NLD stock ROM and install this by using SSPL_RUU.exe
So, conclusion:
- Don't use HSPL
- Install the correct 3.14 stock ROM (German version)
- Install then the NLD version by using SSPL_RUU
Thanks again.
Excellent and detailed info.
Bur with my own number it now says that my S/N does not qualify for download an available Stock ROM 3.14 from the HTC site.
So I think it's a WWE version?
I downgraded again to 1.66.
Al programs working fine.
Will a HSPL 3.03 follow in the future?
Again, thanks for your effort.
Shadow62 said:
Thanks again.
Excellent and detailed info.
Bur with my own number it now says that my S/N does not qualify for download an available Stock ROM 3.14 from the HTC site.
So I think it's a WWE version?
I downgraded again to 1.66.
Al programs working fine.
Will a HSPL 3.03 follow in the future?
Again, thanks for your effort.
Click to expand...
Click to collapse
Hmm, I see.
About a compatible HSPL version with SPL 3.03 It's a wail now that SPL 3.03 exist and till here there is no feedback/reply if a new HSPL version will/and when it will be created.
But concern your cases; probably you have a branded German device (who don't have received a 3.14 stock ROM updated.)
The only thing you can do is use the GoldCard Technique. >> Read more info about it here <<
Don't think it's branded.
I was able to put Stock ROM 3.14NL on it, with HSPL.
Only issue was that SPL did not change.
Shadow62 said:
Don't think it's branded.
I was able to put Stock ROM 3.14NL on it, with HSPL.
Only issue was that SPL did not change.
Click to expand...
Click to collapse
Trust me; it's branded.
And yes, it is normal that you can install a other stock ROM on your device if you have/use HSPL (that's the force of HSPL).
But like you already know, HSPL isn't compatible with Stock ROM 3.14 so the only solution left if you will upgrade to 3.14 stock ROM is to use the GoldCard technique.