Hi,
I looked the forum up and down, but can't find my answer.
So here my Q.
I had HSPL2.
After I installed the official ROM 3.14NL I started having memory problems.
I switched to SPL 2.08.
Still the same problem.
Do I have to reinstall the ROM 3.14?
It seems I need to have the SPL 3.03.0000?
Will it go automaticly to SPL 3.03.0000 with the reinstall?
Thanks.
Shadow62 said:
Hi,
I looked the forum up and down, but can't find my answer.
So here my Q.
I had HSPL2.
After I installed the official ROM 3.14NL I started having memory problems.
I switched to SPL 2.08.
Still the same problem.
Do I have to reinstall the ROM 3.14?
It seems I need to have the SPL 3.03.0000?
Will it go automaticly to SPL 3.03.0000 with the reinstall?
Thanks.
Click to expand...
Click to collapse
Yes; reinstall Stock ROM 3.14
The problems you mention are normal; Stock ROM 3.14 isn't compatible with HSPL and it needs SPL 3.03 (the original from stock ROM 3.14)
kurt-willems said:
Yes; reinstall Stock ROM 3.14
The problems you mention are normal; Stock ROM 3.14 isn't compatible with HSPL and it needs SPL 3.03 (the original from stock ROM 3.14)
Click to expand...
Click to collapse
Hi, thanks for your quick answer.
I'm now trying to update (reinstall) the 3.14 stock ROM.
However, the install procedure begins and holds at 0%.
So it does not start the update.
What can I do to resolve this problem?
Thanks.
Shadow62 said:
Hi, thanks for your quick answer.
I'm now trying to update (reinstall) the 3.14 stock ROM.
However, the install procedure begins and holds at 0%.
So it does not start the update.
What can I do to resolve this problem?
Thanks.
Click to expand...
Click to collapse
Using the right stock ROM.
Go to the HTC webpage and download with your S/N the stock ROM. and use this.
The problem would probably be do to a non compatible stock ROM.
And flash it then over SD; here you have the steps.
1) Download the correct Stock ROM from the HTC Webpage by using your S/N. (you will get a RUU_Leo_xxx_x.XX.xxx.x_Radio_xx.xx.xx.xU_x.xx.xx.x_LEO_Ship file.)
2) Right click on the RUU_Leo_xxx_x.XX.xxx.x_Radio_xx.xx.xx.xU_x.xx.xx.x_LEO_Ship file and select extract with 7Zip/WinZip
3) Prepared your SD-card (use a 2 or 4GB SD no bigger) and format it by FAT32
4)Take the "RUU_signed.nbh" from it and copy it to SD card.
5) Rename the "RUU_signed.nbh" to "leoimg.nbh"
6) Reset the device while pressing the volume down button
7) Follow the instructions mention on your device screen
Click to expand...
Click to collapse
Thanks again for your quickness.
But when I want to get my 3.14 on the HD2 it now says "Ongeldige verkoper-ID" - "Invalid Vendor-ID"
I don't understand, I had the 3.14 on the HD2.
It only did not have the SPL 3.03.0000.
?ow I have the SPL 1.66.0000
So, what do I have dto do now?
Sorry.
Shadow62 said:
Thanks again for your quickness.
But when I want to get my 3.14 on the HD2 it now says "Ongeldige verkoper-ID" - "Invalid Vendor-ID"
I don't understand, I had the 3.14 on the HD2.
It only did not have the SPL 3.03.0000.
?ow I have the SPL 1.66.0000
So, what do I have dto do now?
Sorry.
Click to expand...
Click to collapse
The "Ongeldige verkoper-ID" is the error that say's you that you are trying to install a stock ROM that don't match your device.
Mostly because peoples have a branded device and are trying to install a normal stock ROM.
Did you use your (not from someone els) S/N to download the stock ROM from the HTC Webpage?
Nope, used the Netherlands S/N from XDA Developers.
Bought the phone in Germany, and there was allready a HSPL on it.
Not sure wich ROM originaly was on it.
Think I'm going back to Stock ROM 1.66.
Worked fine.
Strange that I could replace it by 3.14 though.
But of course the SPL did not change to 3.03
Shadow62 said:
Nope, used the Netherlands S/N from XDA Developers.
Bought the phone in Germany, and there was allready a HSPL on it.
Not sure wich ROM originaly was on it.
Think I'm going back to Stock ROM 1.66.
Worked fine.
Strange that I could replace it by 3.14 though.
But of course the SPL did not change to 3.03
Click to expand...
Click to collapse
That's the problem sir. Your device is a originally German Device.
Like I mention before for Stock ROM 3.14 you can't use HSPL and you need to use YOUR S/N to download/install the correct 3.14 stock ROM.
Ons you have install the right/correct stock ROM (German version in your case) than extract the NLD 3.14 stock rom and use the RUU_signed.nbh from the NLD stock ROM and install this by using SSPL_RUU.exe
So, conclusion:
- Don't use HSPL
- Install the correct 3.14 stock ROM (German version)
- Install then the NLD version by using SSPL_RUU
Thanks again.
Excellent and detailed info.
Bur with my own number it now says that my S/N does not qualify for download an available Stock ROM 3.14 from the HTC site.
So I think it's a WWE version?
I downgraded again to 1.66.
Al programs working fine.
Will a HSPL 3.03 follow in the future?
Again, thanks for your effort.
Shadow62 said:
Thanks again.
Excellent and detailed info.
Bur with my own number it now says that my S/N does not qualify for download an available Stock ROM 3.14 from the HTC site.
So I think it's a WWE version?
I downgraded again to 1.66.
Al programs working fine.
Will a HSPL 3.03 follow in the future?
Again, thanks for your effort.
Click to expand...
Click to collapse
Hmm, I see.
About a compatible HSPL version with SPL 3.03 It's a wail now that SPL 3.03 exist and till here there is no feedback/reply if a new HSPL version will/and when it will be created.
But concern your cases; probably you have a branded German device (who don't have received a 3.14 stock ROM updated.)
The only thing you can do is use the GoldCard Technique. >> Read more info about it here <<
Don't think it's branded.
I was able to put Stock ROM 3.14NL on it, with HSPL.
Only issue was that SPL did not change.
Shadow62 said:
Don't think it's branded.
I was able to put Stock ROM 3.14NL on it, with HSPL.
Only issue was that SPL did not change.
Click to expand...
Click to collapse
Trust me; it's branded.
And yes, it is normal that you can install a other stock ROM on your device if you have/use HSPL (that's the force of HSPL).
But like you already know, HSPL isn't compatible with Stock ROM 3.14 so the only solution left if you will upgrade to 3.14 stock ROM is to use the GoldCard technique.
Related
I keep trying to uninstall hspl3 but it wont let me
i download the rom from the htc website and get the nbh file out of it, chance the name and then pu it on my formatted fat32 8gb sd card. but when i put it on my hd2 it gets stuck at the muliti coloured screen with serial on it.
PLEASE HELP
try smaller sd card. fair few people reported 8gb not working.
alternatively run hspl and choose your stock spl from there.
That worked
samsamuel said:
alternatively run hspl and choose your stock spl from there.
Click to expand...
Click to collapse
Reran the setup for HSPL3 and was able to uninstall as suggested.
How to get SPL 1.42
samsamuel said:
try smaller sd card. fair few people reported 8gb not working.
alternatively run hspl and choose your stock spl from there.
Click to expand...
Click to collapse
When I run HSPL3 again I can only choose 2.08 spl and I wanted to get back to the original 1.42 spl - any hints?
The reason is because I want to install the new official 3.14 rom from HTC and I've read that this is not so good with HSPL3 on the phone.
dan_p said:
When I run HSPL3 again I can only choose 2.08 spl and I wanted to get back to the original 1.42 spl - any hints?
The reason is because I want to install the new official 3.14 rom from HTC and I've read that this is not so good with HSPL3 on the phone.
Click to expand...
Click to collapse
The 2.08 SPL is also an official/original SPL version (don't choose SPL2.08 HSPL!!).
If you have 2.08 SPL, you can also upgrade safely to the new 3.14 ROM.
Grtz,
Degake
degake said:
The 2.08 SPL is also an official/original SPL version (don't choose SPL2.08 HSPL!!).
If you have 2.08 SPL, you can also upgrade safely to the new 3.14 ROM.
Grtz,
Degake
Click to expand...
Click to collapse
Thanks.
But can I, after I've used HSPL3 to install SPL 2.08, install an old official 1.66 rom with SPL 1.42? and will this remove HSPL3 and return my phone to SPL 1.42?
I asking because I've read on this great site, that the new rom 3.14 uses spl 3.03 and it's incompatible with spl 2.08 as well as with HSPL3?
dan_p said:
Thanks.
But can I, after I've used HSPL3 to install SPL 2.08, install an old official 1.66 rom with SPL 1.42? and will this remove HSPL3 and return my phone to SPL 1.42?
Click to expand...
Click to collapse
depends how you flash it, , over usb, hspl will remain, via sd card, hspl will be removed. You can also do it by running hspl2 and choosing 1.42.0000, no need to flash anything
I asking because I've read on this great site, that the new rom 3.14 uses spl 3.03 and it's incompatible with spl 2.08 as well as with HSPL3?
Click to expand...
Click to collapse
correct, you would show only 50 meg ram (I believe, i havent tried it yet, gonna wait till hspl or my carier version of 3.x comes out)
samsamuel said:
depends how you flash it, , over usb, hspl will remain, via sd card, hspl will be removed. You can also do it by running hspl2 and choosing 1.42.0000, no need to flash anything
Click to expand...
Click to collapse
Already tried to flash official 1.66 rom via sd card, but was unsuccesfull - no errors but nothing happened - didn't remove hspl3.
Can I use hspl2 on the phone eventhough I already used HSPL3?
sorry for all the noob questions!
dan_p said:
Already tried to flash official 1.66 rom via sd card, but was unsuccesfull - no errors but nothing happened - didn't remove hspl3.
Click to expand...
Click to collapse
strange, , freshly formatted fat32 sd card smaller than 8gb, correct?
Can I use hspl2 on the phone eventhough I already used HSPL3?
Click to expand...
Click to collapse
sure, the actual 2.08 spl/hspl contained in hspl3 is exactly the same as in hspl2, only difference is that hspl2 is more versatile (more spl/hspl options) and hspl3 supports telstra and tmous phones.
For regular hd2 users, hspl2 is the better option.
(Plus hspl2 detects what you currently have running, and offers you the opposite, so if it detects spl 1.66.0000 it defaults to offering you 1.66.hspl.
hspl3 on the other hand always offers you 2.08.0000 and many MANY noobs have just simply hit 'go' without changing the dropdown and then think they now have hspl installed, and they dont, causing much confusion and hundreds of 'oh my god it doesnt work' posts.)
samsamuel said:
strange, , freshly formatted fat32 sd card smaller than 8gb, correct?
Click to expand...
Click to collapse
Yes freshly formatted fat32 1gb card - and nothing. But I have the spl 2.08 hspl and not the spl 2.08 on the phone. Perhaps thats the reason?
I'll try and find the hspl 2 and see if I can change to spl 1.42 that way and then I'll install old stock rom 1.66 via sd to remove hspl and then upgrade to the new 3.14 rom.
Does this sound like an ok approach?
dan_p said:
I'll try and find the hspl 2 and see if I can change to spl 1.42 that way and then I'll install old stock rom 1.66 via sd to remove hspl and then upgrade to the new 3.14 rom.
Click to expand...
Click to collapse
if hspl has been removed you don't need to flash from sd card. the spl will be updated by normal usb flash. only need to use sd card if hspl is still installed.
just flashed mine.......great
I am having the same problem HSPL 2.08 and trying to flash from a FAT 32 2GB SD card with Stock rom 3.14 (LEOIMG.NBH) and I get to the grey screen saying loading and it just stays there.
Any advice?
I put on HSPL 2.08 (though Bootloader just reads 2.08).
Will try tnad flash to 1.42 using HSPL and see if I have any luck.
it doesn't "just read 2.08" it reads either 2.08.0000 or 2.08.hspl, there's a huge difference.
also, if you need hspl because there isn't a stock 3.14 for your phone, you should know that
o sdcard i that nstall 3.14 it won't flash anyway. (step one of sd card flashing is the spl gets updated to 3.03, second it checks the cid and region, finds they don't match, and you get rom upgrade code error.
if you use hspl to customruu install 3.14 it will install and run but be very buggy and only 60mb free ram because spl isn't 3.03.
Ok so I flashed my device to 2.08.hspl - 3.14 then installed happy days.
Not content I decided to run task29 then install 3.14 off the SD card. It got have way through and errored. It changed my SPL from 2.08.hspl to 3.03.0000 but gave a wrong ROM code error please try again.
I think I need to put on the stock rom (it's a stock HTC phone) but it wont accept the 3.14 I have nor the 1.48 I have downloaded.
I try to download 3.14 off the HTC software support site but it tells me that software is'nt for my phone?! it's a late 2010 model (got it mid nov 2010 already had 3.14 when I got it.)
I tried to revert it back to 2.08.hspl but HSPL3 wont recognise the SPL.
Any ideas?
YOU CANNOT INSTALL 3.14 USING HSPL - YOU GET LOW MEMORY AND UNSTABLE PHONE.
you now need to flash back to a correct stock rom. usb is fine, no need for sd card.
Thanks,
I've figured as much but when I try to install the correct stock rom (3.14.405.2 unbranded WWE) it wont load up!
Just does 1% then goes to the software update failed please try again.
so basically my question is what is the correct stock rom for me? because the Stock 3.14 and Stock 1.48 file I downloaded neither work!
Message on bootloader screen as follows -
RUUNBH
PB81100 SS-BC
SPL-3.03.0000 XE
MicroP (LED) 0x05
MicroP(Touch) 0x05
Upgrade ROM Code Error
Please Try again
Just spoke with HTC informed I have a Swiss device!!!! so basically Exspansys sent me a swiss device with WWE 3.14 rom how the hell did they do that or why even?! any way i degress.
Installing the German 3.14 rom now seems to be working will then enternain thenotion of switching languages using goldcard....cherrs for your help.
no need for goldcard.
you already have spl 3.03.0000 from the german rom so just use SSPL to flash.
Tried 3.14 WWE using SSPL_RUU
It gives the usual 00028002 erorr (or 294 Invalid Vendor ID)
I was under the impression now I have a German HD2 with the correct German 3.14 rom with the correct 3.03 SPL I cant flash any other roms with out going down the HSPL route (which cannot be done correctly with 3.03 any way)
I want the stock WWE 3.14 rom and it looks like the only way is the goldcard method? Unless you have any ideas?!?!!?!?
Cheers
Morning.
Is there a method to revert back to an old SPL from 3.03.0000 ?
I have searched and searched but to no avail yet. I have tried HSPL2 and 3. I have read that applying a old stock from from SD card does not work either.
The situation is that my HD2 has come back from warantee repair (overheating/reboot issue) and is running SPL 3.03 with their stock rom. This means that I cannot run a lightweight windows rom and therefore cannot properly run my favourite Android rom(s).
I have read a few people in the same boat so thought I would create a new thread as I couldn't find one yet.
Thank you so much.
Yans.
Hello!
I've had this problem too. You have to flash an ORIGINAL ROM from HTC homepage for your device. You will need the serial number (under the battery) of your HD2. Flash the Original Rom that you downloaded from HTC. After this you will have the old SPL version on your HD2.
Hackedieter said:
Hello!
I've had this problem too. You have to flash an ORIGINAL ROM from HTC homepage for your device. You will need the serial number (under the battery) of your HD2. Flash the Original Rom that you downloaded from HTC. After this you will have the old SPL version on your HD2.
Click to expand...
Click to collapse
* Please note that this upgrade will erase any data stored on the device. Once you proceed with the upgrade, the system can not be downgraded again.
I think theres no normal way (means u cant downgrade official roms, without hspl) of downgrading. U have to use hspl, if it capable of removing the 3.03 spl. If HSPL2-3 cant do that, u have to wait for the new hspl.
Correct me if im wrong.
spl 3.03.0000
Hallo
Install the old original Htc Rom on your HD2 from your PC.
tdi2461 said:
Hallo
Install the old original Htc Rom on your HD2 from your PC.
Click to expand...
Click to collapse
As i told u guys before. U cant install official roms via activesync. Theres only 1 way and that is HSPL.
U cant downgrade officials rom via activesync or sd card.
* Please note that this upgrade will erase any data stored on the device. Once you proceed with the upgrade, the system can not be downgraded again.
The only way is HSPl.
Hi.
Don't be fooled.
I have upgraded and downgraded, and upgraded and downgraded and upgraded again using only the .exe files downloaded from htc.com
Look at this post:
http://forum.xda-developers.com/showpost.php?p=8704559&postcount=26073
Originally Posted by Dic3ptor View Post
is it possible to flash a 1.66 stock ROM after upgrading to 3.14 and install HSPL again? Or must i stay at the new stock 3.14 after flash it ones.
Let me check for you....
EDIT:
Just went back to spl-1.42.0000 by just flashing to 1.48 stock WWE rom.
So I guess you can go back to any rom easily.
Now flashing back to 3.14....
TwanVeugelers said:
Hi.
Don't be fooled.
I have upgraded and downgraded, and upgraded and downgraded and upgraded again using only the .exe files downloaded from htc.com
Look at this post:
http://forum.xda-developers.com/showpost.php?p=8704559&postcount=26073
Originally Posted by Dic3ptor View Post
is it possible to flash a 1.66 stock ROM after upgrading to 3.14 and install HSPL again? Or must i stay at the new stock 3.14 after flash it ones.
Let me check for you....
EDIT:
Just went back to spl-1.42.0000 by just flashing to 1.48 stock WWE rom.
So I guess you can go back to any rom easily.
Now flashing back to 3.14....
Click to expand...
Click to collapse
Copied that stuff from HTC.COM
Flashing without HSPL? Via activesync?
dictator4 said:
Copied that stuff from HTC.COM
Flashing without HSPL? Via activesync?
Click to expand...
Click to collapse
Of course you can downgrade.
What they mean is that your data is permanently lost. Nothing else.
dictator4 said:
Copied that stuff from HTC.COM
Flashing without HSPL? Via activesync?
Click to expand...
Click to collapse
Downloaded the Roms through the support part of HTC.com
Connect phone with activesync.
Run downloaded .exe
That's it.
Easy as that.
If HTC.com does not take your serial (IE branded phone) look at this topic for the new rom:
http://forum.xda-developers.com/showpost.php?p=8725893&postcount=26187
And here for older stock rom:
http://forum.xda-developers.com/showthread.php?t=577717
TwanVeugelers said:
Downloaded the Roms through the support part of HTC.com
Connect phone with activesync.
Run downloaded .exe
That's it.
Easy as that.
If HTC.com does not take your serial (IE branded phone) look at this topic for the new rom:
http://forum.xda-developers.com/showpost.php?p=8725893&postcount=26187
And here for older stock rom:
http://forum.xda-developers.com/showthread.php?t=577717
Click to expand...
Click to collapse
Well, i remember i tried to downgrade once, and i got a message, that i have newer rom, so it cant downgrade.
But i belive u, and still htc says its not possibile.
Thank you
Thank you everyone for your assistance. i am back on HSPL 2.08.
I already had the stock rom from HTC website because I put it on to send the phone back for repairs. I put this back on a moment ago and it put SPL 1.42 back on, PERFECT!
The only reason I didn't do this before (after reading other posts) is because when I did this initially (for sending the phone back) it didn’t touch the SPL but now I realise this was down to the fact it was running HSPL and not SPL.
So I have now incremented SPL 1.42 to HPSL 2.08 and running ChuchDroid for my lovely Android rom. Excellent.
Thank you all
Yans.
Go to your local HTC.com website,go to the support page,look for ROM upgrades for your device(HD2),if the old ROM is removed from the website you most probably wont be able to downgrade,now if you find there 2 ROM updates,say like 3.14.xxx and 166.XXX,chose the older version and enter your S/N if accepts its good to go
Hey guys. Im having this problem over at this thread: /showthread.php?t=814656
My problem is that Activesync does not detect my phone. So I can't downgrade.. But if I somehow get one of the official ROM's (say 1.48) and get the .nbh file onto the sd card, could that work?
YES I DID IT!! Multi card reader for the win!
Flashed WWE rom below but SPL still shows old one HSDL 1.42
Should it not upgrade to SPL 3.03?
"RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship"
murattiss said:
Flashed WWE rom below but SPL still shows old one HSDL 1.42
Should it not upgrade to SPL 3.03?
"RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship"
Click to expand...
Click to collapse
it wont upgrade it whilst hspl is installed unless you flash from sd card.
will it upgrade when I revert back to SPL 1.42 or 1.66 with HSPL2 tool?
murattiss said:
will it upgrade when I revert back to SPL 1.42 or 1.66 with HSPL2 tool?
Click to expand...
Click to collapse
yes it should, but only if your phone is an unbranded wwe one, else it won't flash.
yeeyyyyyyy thank you so much guys...with your help i could get back to 1.42. from 3.03 now im gonna look for some nice wm and android roms thank you so so much guys you made my day
Great to know.
My HD2 died with an unresponsive touchscreen, whilst having hspl 1.42 on.
I got the latest ROM off HTC with my serial, flashed with EXE but HSPL was not overwritten, so I thought that flashing through activesync didn't upgrade the SPL.
Hence I flashed latest rom via microSD and I got the SPL 3.03 there, sure that there was a HSPL for that too.
When I realized there wasn't, I was left with the nightmare of getting back from warranty a bloathed system I couldn't get back to operating conditions.
Now I discover that all it takes to downgrade SPL 3.03 is running the official exe for your device off an older ROM.
Nice.
H-KaN said:
yeeyyyyyyy thank you so much guys...with your help i could get back to 1.42. from 3.03 now im gonna look for some nice wm and android roms thank you so so much guys you made my day
Click to expand...
Click to collapse
Dear friend;
i would like to know how did you down grade spl?
hi all
Is there a way to break hspl 3.03.0000 there?
Break HSPL? Be more specific.
bricked my leo2??
hello, happy new year for every one
i have the 3 color screens after flashing my leo with the last official rom by sd card.... the spl is 3.03... so i can't flash with 2.08 hspl .... and i have the message rom update error....
i would like to know if i can repair my leo with a hspl 3.03... and if exist....
thanks
ligan35 said:
hello, happy new year for every one
i have the 3 color screens after flashing my leo with the last official rom by sd card.... the spl is 3.03... so i can't flash with 2.08 hspl .... and i have the message rom update error....
i would like to know if i can repair my leo with a hspl 3.03... and if exist....
thanks
Click to expand...
Click to collapse
Install the old 1.72 etc ROM through SD card and it will replace the SPL then you can put HSPL 2.08 for your desired Custom ROM. I hope this helps.?
Yup its simple go to shippedroms.com ... get ur stock rom... flash it... and ya then flash the hspl and radio
Sent from my HTC HD2 using XDA App
Hmmmm, I have the 3.14 ROM with 3.03.000 SPL installed.
What I`m trying to do is Install NAND Android. But to do this I need HSPL 2.08.
Tried downloading one of the older stock roms and then attemped to flash via SD and through the .exe file directly.
From the .exe file it boots to the tri color screen and then reaches the progress bar screen. However it sticks there and the errors out with a code : 262.
Through the SD method after the phone detects the .nbh file it comes back with a "28002 : Not allow" error message.
Have tried this with varoius types of Mem cards but no luck.
Is it actually possible to downgrade a 3.03 SSPL?? I read in some forums here that it isnt.
Question : Since this isnt working, will a task 29 help in this case? From what I understand it formats the filesystem that holds the OS. By doing so, will I then be able to flash one of the older Roms so I can install HSPL 2.08?
xcsi said:
Hmmmm, I have the 3.14 ROM with 3.03.000 SPL installed.
What I`m trying to do is Install NAND Android. But to do this I need HSPL 2.08.
Tried downloading one of the older stock roms and then attemped to flash via SD and through the .exe file directly.
From the .exe file it boots to the tri color screen and then reaches the progress bar screen. However it sticks there and the errors out with a code : 262.
Through the SD method after the phone detects the .nbh file it comes back with a "28002 : Not allow" error message.
Have tried this with varoius types of Mem cards but no luck.
Is it actually possible to downgrade a 3.03 SSPL?? I read in some forums here that it isnt.
Question : Since this isnt working, will a task 29 help in this case? From what I understand it formats the filesystem that holds the OS. By doing so, will I then be able to flash one of the older Roms so I can install HSPL 2.08?
Click to expand...
Click to collapse
Task 29 will not work with SPL 3.03.
You need to go to HTC's website and use your phone's serial number to download an older version of the ROM - you will only be allowed to download ROMs which are allowed for your phone. You cannot download a HTC stock ROM if your phone is restricted to a branded (phone operator's) ROM. You should be able to get a 1.66 or 1.72 or 2.08 or 2.10 ROM (dependant upon branding and country).
Put the phone into BootLoader mode, then connect to your computer and run the downloaded file.
it works!!!
download old original rom like 1.48.479.1_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship
flash it via activesync/ win mobile center(win7)
it will downgrade 3.03.0000 to spl 1.42.0000
Thanks a lot for info!
Hey any clue how downgrading from a indian rom would be possible?
sudeep6258 said:
Hey any clue how downgrading from a indian rom would be possible?
Click to expand...
Click to collapse
Install the 1.47 stock rom
Thank you all
My problem was solved with downgrade
cotulla's but please fix the problem with hacking.
dacochir said:
Thank you all
My problem was solved with downgrade
cotulla's but please fix the problem with hacking.
Click to expand...
Click to collapse
lol, nice timing, its already solved. HSPL4 was released a few days ago, see link in my sig. Works with spl 3.03.0000
samsamuel said:
lol, nice timing, its already solved. HSPL4 was released a few days ago, see link in my sig. Works with spl 3.03.0000
Click to expand...
Click to collapse
Thanks for this message!
I just received my device back from repair, worried about the 3.03.0000
Awesome i don't have to worry about that anymore
hi
i am unable to un-install hspl through sd card, using LEOIMG.nbh (extracted form branded ROM), HD2 doesn't go any further than boot-loader screen, i can install ROMs but seems like not possible to remove hspl, any idea please how to install branded ROM?
i tried energy rom that didnt boot however when i installed Dutty V13 it worked and before that I was running android style Faith OttoMan ROM.
now phone is working fine however I want to remove HSPL 2.08 (so called hspl3) and install Branded ROM?
any suggestions?
netvpn7 said:
hi
i am unable to un-install hspl through sd card, using LEOIMG.nbh (extracted form branded ROM), HD2 doesn't go any further than boot-loader screen, i can install ROMs but seems like not possible to remove hspl, any idea please how to install branded ROM?
i tried energy rom that didnt boot however when i installed Dutty V13 it worked and before that I was running android style Faith OttoMan ROM.
now phone is working fine however I want to remove HSPL 2.08 (so called hspl3) and install Branded ROM?
any suggestions?
Click to expand...
Click to collapse
Did you try with HSPL2_RUN.exe to remove you're HSPL? I mean with this application you can also shoos to set a spl version instead of hspl.
kurt-willems said:
Did you try with HSPL2_RUN.exe to remove you're HSPL? I mean with this application you can also shoos to set a spl version instead of hspl.
Click to expand...
Click to collapse
did you mean when you choose 2.08 and there is drop down for spl 0.00 something like this?
only choose 2.08.0000 if you have a tmous.
If you have a regular hd2 run hspl2 (hspl3 isn't 'better' than hspl2, hspl3 just has less options) then choose 1.66.0000
samsamuel said:
only choose 2.08.0000 if you have a tmous.
If you have a regular hd2 run hspl2 (hspl3 isn't 'better' than hspl2, hspl3 just has less options) then choose 1.66.0000
Click to expand...
Click to collapse
thanks for the tip, i managed to install 1.66.0000 but after that it does not read from sd card through LEOIMG.nbh, if I install it normal way should it work? through msactive sync..
netvpn7 said:
thanks for the tip, i managed to install 1.66.0000 but after that it does not read from sd card through LEOIMG.nbh, if I install it normal way should it work? through msactive sync..
Click to expand...
Click to collapse
Yes sir you can flash stock ROM over ActiveSync.
kurt-willems said:
Yes sir you can flash stock ROM over ActiveSync.
Click to expand...
Click to collapse
many thanks for your help, it means the 1.66.0000 is the default spl that comes with branded ROM??? and it does not violate the warranty issues?
regards
any spl that ends 0000 is stock and warranty is valid.
as for sd card, is it a 4gb or bigger card? if so, thats why it doesnt work. best results use a 2gb card.
samsamuel said:
any spl that ends 0000 is stock and warranty is valid.
as for sd card, is it a 4gb or bigger card? if so, thats why it doesnt work. best results use a 2gb card.
Click to expand...
Click to collapse
thanks for confirming, i am using 2gb card.
on my current ROM am keep getting low phone memory errors now, even i install a fresh ROM i get the same error msg..?any help
Finally 8Gb Card worked instead of 2gb..through sd card. all done.
Thank to you all
netvpn7 said:
thanks for confirming, i am using 2gb card.
on my current ROM am keep getting low phone memory errors now, even i install a fresh ROM i get the same error msg..?any help
Click to expand...
Click to collapse
I suppose you have installed stock ROM 3.14.
Can you communicate us the SPL/HSPL value that you see on the bootscreen.
issue getting worse ?
kurt-willems said:
I suppose you have installed stock ROM 3.14.
Can you communicate us the SPL/HSPL value that you see on the bootscreen.
Click to expand...
Click to collapse
oohh noo...another problem, I managed to install LEOIMG.nbh through sd card but now it wont boot and STUCK on HTC Logo, then to get it working I installed dutty v13 ROM that worked without any problem? couldnt understand how and why as where LEOIMG.nbh was installed without any error..
now I am on hspl 2.08
dutty v13 ROM
2.15.50
after fresh install phone memory is 11.30mb???
another thing i noticed when i installed dutty v13 the custom ruu.exe shows no ROM previously installed but when I click upgrade/update then it shows dutty v13 will be installed..i dont know why it didnt shown me the branded ROM installed already like 1.72 etc.. I hope you understand what I mean.
I tried to install Energy latest ROm as well that didnt boot either, only Dutty works??
Please guide me what to do?
Regards
it doesn't show the previous rom info if you put the phone in bootloader yourself before running customruu. this is because the "upgrade from" info gets taken from the registry which it can't do when the phone is in bootloader. its nothing to worry about.
samsamuel said:
it doesn't show the previous rom info if you put the phone in bootloader yourself before running customruu. This is because the "upgrade from" info gets taken from the registry which it can't do when the phone is in bootloader. Its nothing to worry about.
Click to expand...
Click to collapse
but how can i downgrade to branded rom please, it wont boot if i install
also i just installed artemis 48.1 and phone memory is 11.30 mb available?
You keep on saying that it is a branded phone - to whom is it branded (O2, Vodafone, etc) and which country?
the 1.66 ROM is the HTC unbranded version. 1.72 ROMs are the branded versions (except for the T-Mobile USA versions).
Boot up into BootLoader (Press and Hold the Volume Down button then tap the Power button); tell us what it says on the coloured screen.
netvpn7 said:
but how can i downgrade to branded rom please, it wont boot if i install
also i just installed artemis 48.1 and phone memory is 11.30 mb available?
Click to expand...
Click to collapse
Sir the problem of small available memory is mostly cause to the combination of stock ROM 3.14 and HSPL.
So remove your HSPL before installing stock ROM 3.14
fred_up said:
You keep on saying that it is a branded phone - to whom is it branded (O2, Vodafone, etc) and which country?
the 1.66 ROM is the HTC unbranded version. 1.72 ROMs are the branded versions (except for the T-Mobile USA versions).
Boot up into BootLoader (Press and Hold the Volume Down button then tap the Power button); tell us what it says on the coloured screen.
Click to expand...
Click to collapse
hspl 2.08 was installed when I was using Dutty V13 on HD2 however to install Artemis 48.1 I used SSPL so now my boot loader screen shows 1.42.6666 etc.
I tried to flash with SD card to put Branded ROM 02 1.72 that didnt boot and stuck on HTC Logo..
kurt-willems said:
Sir the problem of small available memory is mostly cause to the combination of stock ROM 3.14 and HSPL.
So remove your HSPL before installing stock ROM 3.14
Click to expand...
Click to collapse
i think my stock o2 rom is 1.72 and they not yet released 3.14, you think this could be the reason I am unable to downgrade to stock ROM from 3.14 and that's why only Dutty ROM works with HSPL 2.08 and Artemis with SSPL 1.42.666 etc..
netvpn7 said:
i think my stock o2 rom is 1.72 and they not yet released 3.14, you think this could be the reason I am unable to downgrade to stock ROM from 3.14 and that's why only Dutty ROM works with HSPL 2.08 and Artemis with SSPL 1.42.666 etc..
Click to expand...
Click to collapse
O2 users who will like to use a 3.14 stock ROM need to use the GoldCard technique.
netvpn7 said:
hspl 2.08 was installed when I was using Dutty V13 on HD2 however to install Artemis 48.1 I used SSPL so now my boot loader screen shows 1.42.6666 etc.
I tried to flash with SD card to put Branded ROM 02 1.72 that didnt boot and stuck on HTC Logo..
Click to expand...
Click to collapse
To go from your allowed 1.72 ROM or HSPL'd Dutty V13 ROM to Artemis 48.1 ROM, then you need to remove the HSPL (use HSPL2 and change SPL to 1.66.0000) and then READ the Artemis ROM thread.
You can only use Gold Card method to get Artemis 48.1 ROM flashing. SSPL is only used if you already have a Artemis 4X.X ROM or another 3.14 ROM already running.
netvpn7 said:
SSPL so now my boot loader screen shows 1.42.6666
Click to expand...
Click to collapse
for info the spl only shows 1.42.6666 for one reboot cycle. once you reboot the phone, the spl returns to what it was before.
I have a very big problem. Yesterday i decidet to instal NAND Androin into my HTC HD2. In first step on my 1.66 stock ROM i instaled this http://forum.xda-developers.com/showpost.php?p=6891358&postcount=1893 (HSPL3 and choose 2.08.0000). Everything flashing great but after thad i sow that i have a 2.07.51.22_2 radio version... so i decided to install 3.14 stock rom but i cant I was trying remove hspl but in boot screen i only seen "loading..." (my 2GB SD card was formated in FAT32 and i extracted file from ship but it doeosn't work). My question is what should i do to upgrade my phine to stock 3.14 ? Please help me
Sorry for my english
XFarellX said:
I have a very big problem. Yesterday i decidet to instal NAND Androin into my HTC HD2. In first step on my 1.66 stock ROM i instaled this http://forum.xda-developers.com/showpost.php?p=6891358&postcount=1893 (HSPL3 and choose 2.08.0000). Everything flashing great but after thad i sow that i have a 2.07.51.22_2 radio version... so i decided to install 3.14 stock rom but i cant I was trying remove hspl but in boot screen i only seen "loading..." (my 2GB SD card was formated in FAT32 and i extracted file from ship but it doeosn't work). My question is what should i do to upgrade my phine to stock 3.14 ? Please help me
Sorry for my english
Click to expand...
Click to collapse
Don"t use stock ROM 3.14 if you will install/use NAND!
Stock ROM 3.14 isn't compatible with HSPL; and you will need HSPL for NAND.
Just install/upgrade your Radio version on your 1.66 stock ROM.
hmm but i want to have a 3.14 rom version costum or stock but i dont know how to do it. Could you help me ? How can i upgrade radio version ?? If i do this can i instal NAND Android ?
XFarellX said:
hmm but i want to have a 3.14 rom version costum or stock but i dont know how to do it. Could you help me ? How can i upgrade radio version ?? If i do this can i instal NAND Android ?
Click to expand...
Click to collapse
Like I mentioned before, if your attention is to use/install NA ROMND.
DON'T use stock ROM 3.14! NAND needs HSPL, and this isn't possible in combination with stock ROM 3.14!!!
Just upgrade your radio.
Yeah u should just upgrade your radio. no need to upgrade to 3.14.
I do not see the necessitiy to upgrade to 3.14 if you want to run Android NAND.
What you need to do is to start all over again.
1. Extract RUU_unsigned.nbh from stock 1.66 ROM, rename as leoimg.nbh, copy this file to the root of your SDCard.
2. Pop SDCard into device, Activate bootloader and it will load back your device to 1.66 stock condition.
3. HSPL your device again using HSPL3.
4. Upgrade your radio to whatever your liking (e.g 2.15 etc)
5. Flash any 3.14 custom ROM avaialble at this wonderful site.
cymagnus said:
5. Flash any 3.14 custom ROM available at this wonderful site.
Click to expand...
Click to collapse
Finally got an answer, so HSPL only not recommended for stock 3.14 ROM, but for custom ROM it's doesn't matter. Then we should use SSPL to flash this custom ROM right?
Thanks
cymagnus said:
Yeah u should just upgrade your radio. no need to upgrade to 3.14.
I do not see the necessitiy to upgrade to 3.14 if you want to run Android NAND.
What you need to do is to start all over again.
1. Extract RUU_unsigned.nbh from stock 1.66 ROM, rename as leoimg.nbh, copy this file to the root of your SDCard.
2. Pop SDCard into device, Activate bootloader and it will load back your device to 1.66 stock condition.
3. HSPL your device again using HSPL3.
4. Upgrade your radio to whatever your liking (e.g 2.15 etc)
5. Flash any 3.14 custom ROM avaialble at this wonderful site.
Click to expand...
Click to collapse
Ok, but in stock ship i have a RUU_signed.nbh not unsigned
XFarellX said:
Ok, but in stock ship i have a RUU_signed.nbh not unsigned
Click to expand...
Click to collapse
Yes you are right, maybe cymagnus mean was RUU_signed.nbh
erwinpiero said:
Finally got an answer, so HSPL only not recommended for stock 3.14 ROM, but for custom ROM it's doesn't matter. Then we should use SSPL to flash this custom ROM right?
Thanks
Click to expand...
Click to collapse
The only problem using SSPL is that you cant flash radio and you cant do task 29
As suggested in forums, you have to do task 29 before flashing rom in order to clean up the memory. If you use SSPL, you cant do that. So there is possibility that you will find bug(s) originating from previous rom.
Cheers...
XFarellX said:
I have a very big problem. Yesterday i decidet to instal NAND Androin into my HTC HD2. In first step on my 1.66 stock ROM i instaled this http://forum.xda-developers.com/showpost.php?p=6891358&postcount=1893 (HSPL3 and choose 2.08.0000). Everything flashing great but after thad i sow that i have a 2.07.51.22_2 radio version... so i decided to install 3.14 stock rom but i cant I was trying remove hspl but in boot screen i only seen "loading..." (my 2GB SD card was formated in FAT32 and i extracted file from ship but it doeosn't work). My question is what should i do to upgrade my phine to stock 3.14 ? Please help me
Sorry for my english
Click to expand...
Click to collapse
Firstly, 2.08.0000 is NOT hspl, it is a stock spl version. You need to select 2.08.hspl when running HSPL3. To flash a new radio there is no need to install the whole rom, just download and flash the radio. Click on the link in my signature for my radio and there are plenty of standalone radio roms there. Flash the same way as a rom (as long as you have hspl installed).
If you are wanting to go Android don't install 3.14, just do the abovementioned items. If you really do want to go stock 3.14 rom, then you can do this once hspl is installed BUT it is not recommended and it is better to use the Goldcard method.
silverwind said:
The only problem using SSPL is that you cant flash radio and you cant do task 29
As suggested in forums, you have to do task 29 before flashing rom in order to clean up the memory. If you use SSPL, you cant do that. So there is possibility that you will find bug(s) originating from previous rom.
Cheers...
Click to expand...
Click to collapse
Ow i see, thank you for your clear explanation Mas, yes when we had HSPL then we can play a lot and it's a must to use task29. My misunderstanding too, if we flash HSPL then we could flash any ROMs, so we don't need SSPL. But still HSPL was not recommended for 3.14 stock ROM. I hope my conclusion is right.
Thank You
dude u need to go to the bootloader power and vol down.. and then flash... not the usb flasher in magldr.. hit thanks if this was the problem
erwinpiero said:
Yes you are right, maybe cymagnus mean was RUU_signed.nbh
Click to expand...
Click to collapse
Opps.. yeah it's RUU_signed.nbh. Got mix up with Nokia stuffs. lol.
ClydeB1 said:
Firstly, 2.08.0000 is NOT hspl, it is a stock spl version. You need to select 2.08.hspl when running HSPL3. To flash a new radio there is no need to install the whole rom, just download and flash the radio. Click on the link in my signature for my radio and there are plenty of standalone radio roms there. Flash the same way as a rom (as long as you have hspl installed).
If you are wanting to go Android don't install 3.14, just do the abovementioned items. If you really do want to go stock 3.14 rom, then you can do this once hspl is installed BUT it is not recommended and it is better to use the Goldcard method.
Click to expand...
Click to collapse
Thanks a lot !! Could you tell me how to instal stock 3.14 step by step ? I feel green in this topic
Stock 3.14 ROM won't be a good idea. There are many beautiful ROMs over there which give you the freedom to enjoy 576MB of RAM with proper radio versions. Stock is no good.. Be careful of what radio version you have while flashing ROMs as incompatible radio may prevent the phone from booting. Before installing android, check the compatible radio versions and install one before doing anything Check this for more info step by step http://forum.xda-developers.com/showthread.php?t=732380
Thanks, but i want install stoc rom 3.14 and i don't know how to do it because i have spl 2.08.0000 instaled via HSPL3. Someone can help me ? I don't wanna install android or any costum rom. Please help... i need stock rom 3.14
Okay! Download the 3.14 ROM from correct HTC website for your country. Once downloaded, open with WinRAR and extract RUU_signed.nbh to any folder. Rename it to LEOIMG.nbh and copy it to the root of your memory card. Make sure your memory card is formatted with FAT32 partition method. Insert the card in your phone (while phone is switched off) and hold the 'Volume down' button. Press power button while the Vol down button is pressed. Your phone will enter bootloader and you'll be able to flash the ROM. By this method, even if you have HSPL installed, it will be overwritten by stock SPL 3.03
Happy flashing! Dont forget to backup your personal data!
XFarellX said:
Thanks, but i want install stoc rom 3.14 and i don't know how to do it because i have spl 2.08.0000 instaled via HSPL3. Someone can help me ? I don't wanna install android or any costum rom. Please help... i need stock rom 3.14
Click to expand...
Click to collapse
Will you make your mind up. Firstly you wanted Android installed, then it was 3.14 custom or stock and now it is only 3.14 Stock ROM.
Thankfully you have the SPL of 2.08.0000, which means that HSPL has been removed.
Go to HTC's website and download the 3.14 ROM with your phone's serial number. If you are allowed to download the file, then there should be no problem in running it from your PC. If you get a 'you are not allowed to download this file', then you have to use the GoldCard method.
Whats wrong... I download from HTC site stock rom 3.14. Program found my phone and current instal version (1.66), when i click update status bar is still on 0% (after 20 minutes i desconect phone and turn on - everything works great but in 1.66 rom :/). After that i was trying updated via gold card method ( i prepared 2GB micro SD card - format in FAT32 and copy rename nbh file) but when i'm swith on my HD2 holding volume down button on the screen i can see "loading..." and nothing more
XFarellX said:
Whats wrong... I download from HTC site stock rom 3.14. Program found my phone and current instal version (1.66), when i click update status bar is still on 0% (after 20 minutes i desconect phone and turn on - everything works great but in 1.66 rom :/). After that i was trying updated via gold card method ( i prepared 2GB micro SD card - format in FAT32 and copy rename nbh file) but when i'm swith on my HD2 holding volume down button on the screen i can see "loading..." and nothing more
Click to expand...
Click to collapse
Did you downloaded the right stock ROM by using your S/N?