I have a very big problem. Yesterday i decidet to instal NAND Androin into my HTC HD2. In first step on my 1.66 stock ROM i instaled this http://forum.xda-developers.com/showpost.php?p=6891358&postcount=1893 (HSPL3 and choose 2.08.0000). Everything flashing great but after thad i sow that i have a 2.07.51.22_2 radio version... so i decided to install 3.14 stock rom but i cant I was trying remove hspl but in boot screen i only seen "loading..." (my 2GB SD card was formated in FAT32 and i extracted file from ship but it doeosn't work). My question is what should i do to upgrade my phine to stock 3.14 ? Please help me
Sorry for my english
XFarellX said:
I have a very big problem. Yesterday i decidet to instal NAND Androin into my HTC HD2. In first step on my 1.66 stock ROM i instaled this http://forum.xda-developers.com/showpost.php?p=6891358&postcount=1893 (HSPL3 and choose 2.08.0000). Everything flashing great but after thad i sow that i have a 2.07.51.22_2 radio version... so i decided to install 3.14 stock rom but i cant I was trying remove hspl but in boot screen i only seen "loading..." (my 2GB SD card was formated in FAT32 and i extracted file from ship but it doeosn't work). My question is what should i do to upgrade my phine to stock 3.14 ? Please help me
Sorry for my english
Click to expand...
Click to collapse
Don"t use stock ROM 3.14 if you will install/use NAND!
Stock ROM 3.14 isn't compatible with HSPL; and you will need HSPL for NAND.
Just install/upgrade your Radio version on your 1.66 stock ROM.
hmm but i want to have a 3.14 rom version costum or stock but i dont know how to do it. Could you help me ? How can i upgrade radio version ?? If i do this can i instal NAND Android ?
XFarellX said:
hmm but i want to have a 3.14 rom version costum or stock but i dont know how to do it. Could you help me ? How can i upgrade radio version ?? If i do this can i instal NAND Android ?
Click to expand...
Click to collapse
Like I mentioned before, if your attention is to use/install NA ROMND.
DON'T use stock ROM 3.14! NAND needs HSPL, and this isn't possible in combination with stock ROM 3.14!!!
Just upgrade your radio.
Yeah u should just upgrade your radio. no need to upgrade to 3.14.
I do not see the necessitiy to upgrade to 3.14 if you want to run Android NAND.
What you need to do is to start all over again.
1. Extract RUU_unsigned.nbh from stock 1.66 ROM, rename as leoimg.nbh, copy this file to the root of your SDCard.
2. Pop SDCard into device, Activate bootloader and it will load back your device to 1.66 stock condition.
3. HSPL your device again using HSPL3.
4. Upgrade your radio to whatever your liking (e.g 2.15 etc)
5. Flash any 3.14 custom ROM avaialble at this wonderful site.
cymagnus said:
5. Flash any 3.14 custom ROM available at this wonderful site.
Click to expand...
Click to collapse
Finally got an answer, so HSPL only not recommended for stock 3.14 ROM, but for custom ROM it's doesn't matter. Then we should use SSPL to flash this custom ROM right?
Thanks
cymagnus said:
Yeah u should just upgrade your radio. no need to upgrade to 3.14.
I do not see the necessitiy to upgrade to 3.14 if you want to run Android NAND.
What you need to do is to start all over again.
1. Extract RUU_unsigned.nbh from stock 1.66 ROM, rename as leoimg.nbh, copy this file to the root of your SDCard.
2. Pop SDCard into device, Activate bootloader and it will load back your device to 1.66 stock condition.
3. HSPL your device again using HSPL3.
4. Upgrade your radio to whatever your liking (e.g 2.15 etc)
5. Flash any 3.14 custom ROM avaialble at this wonderful site.
Click to expand...
Click to collapse
Ok, but in stock ship i have a RUU_signed.nbh not unsigned
XFarellX said:
Ok, but in stock ship i have a RUU_signed.nbh not unsigned
Click to expand...
Click to collapse
Yes you are right, maybe cymagnus mean was RUU_signed.nbh
erwinpiero said:
Finally got an answer, so HSPL only not recommended for stock 3.14 ROM, but for custom ROM it's doesn't matter. Then we should use SSPL to flash this custom ROM right?
Thanks
Click to expand...
Click to collapse
The only problem using SSPL is that you cant flash radio and you cant do task 29
As suggested in forums, you have to do task 29 before flashing rom in order to clean up the memory. If you use SSPL, you cant do that. So there is possibility that you will find bug(s) originating from previous rom.
Cheers...
XFarellX said:
I have a very big problem. Yesterday i decidet to instal NAND Androin into my HTC HD2. In first step on my 1.66 stock ROM i instaled this http://forum.xda-developers.com/showpost.php?p=6891358&postcount=1893 (HSPL3 and choose 2.08.0000). Everything flashing great but after thad i sow that i have a 2.07.51.22_2 radio version... so i decided to install 3.14 stock rom but i cant I was trying remove hspl but in boot screen i only seen "loading..." (my 2GB SD card was formated in FAT32 and i extracted file from ship but it doeosn't work). My question is what should i do to upgrade my phine to stock 3.14 ? Please help me
Sorry for my english
Click to expand...
Click to collapse
Firstly, 2.08.0000 is NOT hspl, it is a stock spl version. You need to select 2.08.hspl when running HSPL3. To flash a new radio there is no need to install the whole rom, just download and flash the radio. Click on the link in my signature for my radio and there are plenty of standalone radio roms there. Flash the same way as a rom (as long as you have hspl installed).
If you are wanting to go Android don't install 3.14, just do the abovementioned items. If you really do want to go stock 3.14 rom, then you can do this once hspl is installed BUT it is not recommended and it is better to use the Goldcard method.
silverwind said:
The only problem using SSPL is that you cant flash radio and you cant do task 29
As suggested in forums, you have to do task 29 before flashing rom in order to clean up the memory. If you use SSPL, you cant do that. So there is possibility that you will find bug(s) originating from previous rom.
Cheers...
Click to expand...
Click to collapse
Ow i see, thank you for your clear explanation Mas, yes when we had HSPL then we can play a lot and it's a must to use task29. My misunderstanding too, if we flash HSPL then we could flash any ROMs, so we don't need SSPL. But still HSPL was not recommended for 3.14 stock ROM. I hope my conclusion is right.
Thank You
dude u need to go to the bootloader power and vol down.. and then flash... not the usb flasher in magldr.. hit thanks if this was the problem
erwinpiero said:
Yes you are right, maybe cymagnus mean was RUU_signed.nbh
Click to expand...
Click to collapse
Opps.. yeah it's RUU_signed.nbh. Got mix up with Nokia stuffs. lol.
ClydeB1 said:
Firstly, 2.08.0000 is NOT hspl, it is a stock spl version. You need to select 2.08.hspl when running HSPL3. To flash a new radio there is no need to install the whole rom, just download and flash the radio. Click on the link in my signature for my radio and there are plenty of standalone radio roms there. Flash the same way as a rom (as long as you have hspl installed).
If you are wanting to go Android don't install 3.14, just do the abovementioned items. If you really do want to go stock 3.14 rom, then you can do this once hspl is installed BUT it is not recommended and it is better to use the Goldcard method.
Click to expand...
Click to collapse
Thanks a lot !! Could you tell me how to instal stock 3.14 step by step ? I feel green in this topic
Stock 3.14 ROM won't be a good idea. There are many beautiful ROMs over there which give you the freedom to enjoy 576MB of RAM with proper radio versions. Stock is no good.. Be careful of what radio version you have while flashing ROMs as incompatible radio may prevent the phone from booting. Before installing android, check the compatible radio versions and install one before doing anything Check this for more info step by step http://forum.xda-developers.com/showthread.php?t=732380
Thanks, but i want install stoc rom 3.14 and i don't know how to do it because i have spl 2.08.0000 instaled via HSPL3. Someone can help me ? I don't wanna install android or any costum rom. Please help... i need stock rom 3.14
Okay! Download the 3.14 ROM from correct HTC website for your country. Once downloaded, open with WinRAR and extract RUU_signed.nbh to any folder. Rename it to LEOIMG.nbh and copy it to the root of your memory card. Make sure your memory card is formatted with FAT32 partition method. Insert the card in your phone (while phone is switched off) and hold the 'Volume down' button. Press power button while the Vol down button is pressed. Your phone will enter bootloader and you'll be able to flash the ROM. By this method, even if you have HSPL installed, it will be overwritten by stock SPL 3.03
Happy flashing! Dont forget to backup your personal data!
XFarellX said:
Thanks, but i want install stoc rom 3.14 and i don't know how to do it because i have spl 2.08.0000 instaled via HSPL3. Someone can help me ? I don't wanna install android or any costum rom. Please help... i need stock rom 3.14
Click to expand...
Click to collapse
Will you make your mind up. Firstly you wanted Android installed, then it was 3.14 custom or stock and now it is only 3.14 Stock ROM.
Thankfully you have the SPL of 2.08.0000, which means that HSPL has been removed.
Go to HTC's website and download the 3.14 ROM with your phone's serial number. If you are allowed to download the file, then there should be no problem in running it from your PC. If you get a 'you are not allowed to download this file', then you have to use the GoldCard method.
Whats wrong... I download from HTC site stock rom 3.14. Program found my phone and current instal version (1.66), when i click update status bar is still on 0% (after 20 minutes i desconect phone and turn on - everything works great but in 1.66 rom :/). After that i was trying updated via gold card method ( i prepared 2GB micro SD card - format in FAT32 and copy rename nbh file) but when i'm swith on my HD2 holding volume down button on the screen i can see "loading..." and nothing more
XFarellX said:
Whats wrong... I download from HTC site stock rom 3.14. Program found my phone and current instal version (1.66), when i click update status bar is still on 0% (after 20 minutes i desconect phone and turn on - everything works great but in 1.66 rom :/). After that i was trying updated via gold card method ( i prepared 2GB micro SD card - format in FAT32 and copy rename nbh file) but when i'm swith on my HD2 holding volume down button on the screen i can see "loading..." and nothing more
Click to expand...
Click to collapse
Did you downloaded the right stock ROM by using your S/N?
Related
Howdy all,
Had ANdroid on the HD2 and wanting to revert back to the original ROM.
Have downloaded a stock rom (3.14 WWE) and have used task 29 to clean up the phone.
Trying to install the rom gives an error: 209: Invalid Vendor ID.
THe phone shows it get to 1% and then reset itself.
I have tried 1.32 Radio, 1.66 and 2.08, all giving the same result (Except for 2.08 wouldnt even get to 1%)
Completely stuck here...
Any help would be great.
Also, read about flashing from SD, but because i've used task 29 the phone has no ROM to boot to. Plus I couldnt figure out how to extract the RUU_signed.nbh from the original .exe
Maybe i've done something wrong?
Any help would be great.
Cheers
Oky, lets start with the beginning.
Error: 209: (Invalid Vendor ID) means that the stock ROM you are try to install isn't the right one. Probably you have a branded device; ore you need to install a otter aria Rom.
Secondly Stock ROM 3.14 isn't compatible with HSPL; so you need to remove it (use HSPL2_RUN.exe to remove HSPL and select SPL 1.66 instead.)
PS, you don't need to install separately a Radio version. Ons you have install Stock Rom 3.14 you will have automatic Radio 2.15.50.14
The important thing is to install a correct stock ROM who match with your device. (witch was your official ROM version?)
kurt-willems said:
Oky, lets start with the beginning.
Error: 209: (Invalid Vendor ID) means that the stock ROM you are try to install isn't the right one. Probably you have a branded device; ore you need to install a otter aria Rom.
Secondly Stock ROM 3.14 isn't compatible with HSPL; so you need to remove it (use HSPL2_RUN.exe to remove HSPL and select SPL 1.66 instead.)
PS, you don't need to install separately a Radio version. Ons you have install Stock Rom 3.14 you will have automatic Radio 2.15.50.14
The important thing is to install a correct stock ROM who match with your device. (witch was your official ROM version?)
Click to expand...
Click to collapse
Sorry i meant SPL.....
Bought the phone from Mobicity and it was imported from Thailand originally....I have previously installed this exact same ROM i am trying to install now....
but after putting Andriod on the device...trying to revert it back is proving impossible.....
I am giving the phone to a friend and thats why i want a stock ROM back on it.....
ftosam said:
Sorry i meant SPL.....
Bought the phone from Mobicity and it was imported from Thailand originally....I have previously installed this exact same ROM i am trying to install now....
but after putting Andriod on the device...trying to revert it back is proving impossible.....
I am giving the phone to a friend and thats why i want a stock ROM back on it.....
Click to expand...
Click to collapse
Stock ROM 3.14 WWE (3.14.413.2) can't be install on a Thailand Rom version !?
Secondly Task 29 isn't compatible with SPL 3.03 neater.
Thirdly I don't see way you need to revers back to a stock ROM (because you mention that Android was the reason (Android isn't install on your device, but on SD. So it don't change your internal ROM))
Okay; what you can try to do is flashing over SD.
but you need to use a original stock ROM and not the WWE (3.14.413.2) you need the version of Thailand (if this was your original!?) (Asia_WWE_3.14.707.3)
- Download your original stock ROM
- Use WinZip to extract it; and extract the RUU_signed.nbh file
- Rename the .nbh file to "leoimg.nbh" place it on a SD (take a 2GB SD) who was been format (FAT32)
- Shut Down your device, enter your SD, hold volume down button, and shortly press on the power button.
- follow the instructions on your screen.
But like mention early'r you need to use the right stock ROM version!
kurt-willems said:
Stock ROM 3.14 WWE (3.14.413.2) can't be install on a Thailand Rom version !?
Secondly Task 29 isn't compatible with SPL 3.03 neater.
Thirdly I don't see way you need to revers back to a stock ROM (because you mention that Android was the reason (Android isn't install on your device, but on SD. So it don't change your internal ROM))
Okay; what you can try to do is flashing over SD.
but you need to use a original stock ROM and not the WWE (3.14.413.2) you need the version of Thailand (if this was your original!?) (Asia_WWE_3.14.707.3)
- Download your original stock ROM
- Use WinZip to extract it; and extract the RUU_signed.nbh file
- Rename the .nbh file to "leoimg.nbh" place it on a SD (take a 2GB SD) who was been format (FAT32)
- Shut Down your device, enter your SD, hold volume down button, and shortly press on the power button.
- follow the instructions on your screen.
But like mention early'r you need to use the right stock ROM version!
Click to expand...
Click to collapse
Thanks! that worked, but now it is stuck in Taiwanese ? is there a way to change it to english, as when i purchased the phone it was all in english?
ftosam said:
Thanks! that worked, but now it is stuck in Taiwanese ? is there a way to change it to english, as when i purchased the phone it was all in english?
Click to expand...
Click to collapse
Based on the fact that stock ROM 3.14 use SPL 3.03 who isn't compatible with HSPL you can't change your stock ROM version by using HSPL.
But if you used the GoldCard technique you can install a otter stock ROM version.
kurt-willems said:
Based on the fact that stock ROM 3.14 use SPL 3.03 who isn't compatible with HSPL you can't change your stock ROM version by using HSPL.
But if you used the GoldCard technique you can install a otter stock ROM version.
Click to expand...
Click to collapse
HSPL is not on my phone, only SPL 1.66 ...... I had to flash using USB as SD card way would not work .....
There must be a way of doing this only because when i received my phone it was in english so i really dont understand,,,,i just want a stock ROM in english.....
ftosam said:
HSPL is not on my phone, only SPL 1.66 ...... I had to flash using USB as SD card way would not work .....
There must be a way of doing this only because when i received my phone it was in english so i really dont understand,,,,i just want a stock ROM in english.....
Click to expand...
Click to collapse
Sorry sir, I can't follow you
You mentioned to have install Stock rom 3.14 correctly; but now you mention to have "SPL 1.66"
If you have install stock ROM 3.14 correctly like mention before you will have SPL 3.03!
And like I mention before if you will install latest stock ROM 3.14 WWE (3.14.413.2) on your Taiwanese device (x.XX.707.x) you need to use the GoldCard technique!
We dont have spl 3 could that be why the other ROMs woulnt work?
How do i get Spl 3?
ftosam said:
We dont have spl 3 could that be why the other ROMs woulnt work?
How do i get Spl 3?
Click to expand...
Click to collapse
When you install stock ROM 3.14 correctly it will upgrade automatically your SPL version to 3.03!
But it seems fore one ore a other reason it didn't do it correctly.
Connect your device by active sync, and run "RUU_Leo_S_hTC_Asia_WWE_3.14.707.3" as administrator, to install it again.
I don't know from where you get the original stock ROM; but to be sure download it again: RUU_Leo_S_hTC_Asia_WWE_3.14.707.3
I have no idea why it is still not working getting the same error as before, the only ROM that will install is the one that is not in english
I wont work it still gives me the same error as before invalid vendor .....
I dont know how to fix this i just want a stock ROM in english....
ftosam said:
I wont work it still gives me the same error as before invalid vendor .....
I dont know how to fix this i just want a stock ROM in english....
Click to expand...
Click to collapse
ftosam said:
I have no idea why it is still not working getting the same error as before, the only ROM that will install is the one that is not in english
Click to expand...
Click to collapse
Sir did you listen/follow my previous instructions!!!???
You can't install a WWE stock ROM (3.14.413.2) on your Taiwanese device (x.XX.707.x) you need to use the GoldCard!!!
It didnt work, it still gives error and i tried the goldcard way but it doesn't load anything i quickly flashes a screen that says loading and then it goes back to the boot loader and just stays there.....
ftosam said:
It didnt work, it still gives error and i tried the goldcard way but it doesn't load anything i quickly flashes a screen that says loading and then it goes back to the boot loader and just stays there.....
Click to expand...
Click to collapse
I have the impression that you are doing something that's isn't correct.
Lot of peoples who I know have used the Goldcard technique; and all without issues.
Ended up getting the goldcard to work (Used a different SD Card)....
However it STILL comes up with the same error. (If I try flashing wwe Asia from the sd card, it says " Not Allowed")
We have previously used all sorts or ROMs on this phone... but the same ROMs now seem to be giving this Vendor Error... It just doesnt make sense...
I have stock 1.66.707.1 (76641) WWE ROM with HSPL3 Installed, now, I want to install the 3.14, should I remove HSPL3 first or what?
and if after installing 3.14, I want to install Android, AFAIK Android needs HSPL3 installed and a custom ROM, but most custom ROM now is base on 3.14..
So how do I Install?
You don't need HSPL3 for Android itself, you need it to flash a compatible radio with Android.
Since 3.14 supplies you with the latest compatible Radio there is no need for HSPL3.
Just remove HSPL then install 3.14 then put on Android, It should work .
(P.S. : You can flash 3.14 with HSPL installed and it won't affect Android, But it will reduce your WinMo RAM very much)
so what do u suggest I do now?
Remove HSPL3, install 3.14 (which have 2.15 radio installed) and install Android?
is the 3.14 even good? I heard many complaints about it
azlan96 said:
so what do u suggest I do now?
Remove HSPL3, install 3.14 (which have 2.15 radio installed) and install Android?
is the 3.14 even good? I heard many complaints about it
Click to expand...
Click to collapse
Stock ROM 3.14 is okay, the only problem is that sometimes some users don't remove HSPL and this cosed problems.
When you have install stock ROM 3.14 (without HSPL) you can install/use Android.
err, OK, how do I remove HSPL3? Do I need to reflash my 1.66 ROM?
and is Android smooth and stable on the 3.14 ROM?
azlan96 said:
err, OK, how do I remove HSPL3? Do I need to reflash my 1.66 ROM?
and is Android smooth and stable on the 3.14 ROM?
Click to expand...
Click to collapse
Normally (if my memory is correct) with the use of HSPL3_RUN.exe you can select a normal SPL version. (In any case HSPL2_RUN have this possibility).
Of course flashing stock ROM over SD will also remove HSPL.
Android is compatible at 100% whit stock ROM 3.14. The only thing what is important is the radio (stock ROM 3.14 have radio 2.15.50.14 (who is working well with Android)) and the Kernel (this is part of Android).
azlan96 said:
err, OK, how do I remove HSPL3? Do I need to reflash my 1.66 ROM?
and is Android smooth and stable on the 3.14 ROM?
Click to expand...
Click to collapse
It depends on your usage.
Basically you if you use Android more often than WinMo then don't bother removing HSPL. But if you're a Winmo user but Sometimes you like to run Android then you should remove it.
If u want to remove HSPL then check this link :
http://forum.xda-developers.com/showthread.php?t=611433
If you want to flash the 3.14 ROM, then go here :
http://forum.xda-developers.com/showthread.php?t=623283
Have Fun Flashing
Edit : Nowadays, Android is smooth and stable, all you have to do is to choose the best build (that satisfy your needs)
Thanks for answering, I have to use Windows Mobile for daily GPS Navigation..
4) Uninstallation
Only way to remove the HSPL is to flash an original SPL from SD card.
- Take any "RUU_signed.nbh" from a ship ROM and copy it to SD card.
- Rename it to "leoimg.nbh"
- Reset the device while pressing the volume down button.
If I did this will it be like a hard reset or what?
azlan96 said:
Thanks for answering, I have to use Windows Mobile for daily GPS Navigation..
4) Uninstallation
Only way to remove the HSPL is to flash an original SPL from SD card.
- Take any "RUU_signed.nbh" from a ship ROM and copy it to SD card.
- Rename it to "leoimg.nbh"
- Reset the device while pressing the volume down button.
If I did this will it be like a hard reset or what?
Click to expand...
Click to collapse
Yes sir, almost the same effect.
Nice, now I need a
1. a 1.66.707.1 ROM
2 a 3.14.707.1 ROM
Please help me finding these two, thankyou..
azlan96 said:
Nice, now I need a
1. a 1.66.707.1 ROM
2 a 3.14.707.1 ROM
Please help me finding these two, thankyou..
Click to expand...
Click to collapse
Why do you need a 1.66 ROM ? you don't need it anymore, and choose the 3.14 ROM you want from here :
kawazaki said:
http://forum.xda-developers.com/showthread.php?t=623283
Click to expand...
Click to collapse
^
cause I need to remove HSPL3, using the SD card method, or can I remove it with ActiveSync? if I can, HOw?
how i can change this rom,
task29 and raid can't complete instalation block in 0%
pleazzzzzz help me!!!!
HSPL3 dont work
HSPL and stock ROM 3.14 isn't compatible sir.
you need to remove HSPL before you install stock ROM 3.14
how i can remove hspl
rom 3.14.73.2 it's official rom of orange
ghazi_hd2 said:
how i can remove hspl
rom 3.14.73.2 it's official rom of orange
Click to expand...
Click to collapse
If you have install the 3.14 stock ROM already; return beck on previous stock ROM by flashing it over SD.
Or just tern back by flashing previous stock ROM over ActiveSync; and then by running HSPL2_RUN.exe you select a SPL value.
with activsynchro it block also in 0%
but with sd i don't know how i can do this
This may not help but..., can you access the Bootloader? If you can..., look at the Radio and ROM numbers...., then look for a previous Radio and ROM...., say 2 issues back ..., try to flash with an earlier original or custom ROM.
I've been told that rarely works but Imust have been...., the one time I needed a solution to a similiar situation ..., that worked.
ghazi_hd2 said:
with activsynchro it block also in 0%
but with sd i don't know how i can do this
Click to expand...
Click to collapse
If you will flash over ActivSync, set your device on Bootloader, and make sure that your Antivirus Program is temporary deactivated.
If you will flash over SD:
Take a look on my thread I opened in the past; and read the instructions mentioned on:
Q;How to remove HSPL?
Remove HSPL by flashing an original SPL from SD card.
Here the link.
Hi,
I looked the forum up and down, but can't find my answer.
So here my Q.
I had HSPL2.
After I installed the official ROM 3.14NL I started having memory problems.
I switched to SPL 2.08.
Still the same problem.
Do I have to reinstall the ROM 3.14?
It seems I need to have the SPL 3.03.0000?
Will it go automaticly to SPL 3.03.0000 with the reinstall?
Thanks.
Shadow62 said:
Hi,
I looked the forum up and down, but can't find my answer.
So here my Q.
I had HSPL2.
After I installed the official ROM 3.14NL I started having memory problems.
I switched to SPL 2.08.
Still the same problem.
Do I have to reinstall the ROM 3.14?
It seems I need to have the SPL 3.03.0000?
Will it go automaticly to SPL 3.03.0000 with the reinstall?
Thanks.
Click to expand...
Click to collapse
Yes; reinstall Stock ROM 3.14
The problems you mention are normal; Stock ROM 3.14 isn't compatible with HSPL and it needs SPL 3.03 (the original from stock ROM 3.14)
kurt-willems said:
Yes; reinstall Stock ROM 3.14
The problems you mention are normal; Stock ROM 3.14 isn't compatible with HSPL and it needs SPL 3.03 (the original from stock ROM 3.14)
Click to expand...
Click to collapse
Hi, thanks for your quick answer.
I'm now trying to update (reinstall) the 3.14 stock ROM.
However, the install procedure begins and holds at 0%.
So it does not start the update.
What can I do to resolve this problem?
Thanks.
Shadow62 said:
Hi, thanks for your quick answer.
I'm now trying to update (reinstall) the 3.14 stock ROM.
However, the install procedure begins and holds at 0%.
So it does not start the update.
What can I do to resolve this problem?
Thanks.
Click to expand...
Click to collapse
Using the right stock ROM.
Go to the HTC webpage and download with your S/N the stock ROM. and use this.
The problem would probably be do to a non compatible stock ROM.
And flash it then over SD; here you have the steps.
1) Download the correct Stock ROM from the HTC Webpage by using your S/N. (you will get a RUU_Leo_xxx_x.XX.xxx.x_Radio_xx.xx.xx.xU_x.xx.xx.x_LEO_Ship file.)
2) Right click on the RUU_Leo_xxx_x.XX.xxx.x_Radio_xx.xx.xx.xU_x.xx.xx.x_LEO_Ship file and select extract with 7Zip/WinZip
3) Prepared your SD-card (use a 2 or 4GB SD no bigger) and format it by FAT32
4)Take the "RUU_signed.nbh" from it and copy it to SD card.
5) Rename the "RUU_signed.nbh" to "leoimg.nbh"
6) Reset the device while pressing the volume down button
7) Follow the instructions mention on your device screen
Click to expand...
Click to collapse
Thanks again for your quickness.
But when I want to get my 3.14 on the HD2 it now says "Ongeldige verkoper-ID" - "Invalid Vendor-ID"
I don't understand, I had the 3.14 on the HD2.
It only did not have the SPL 3.03.0000.
?ow I have the SPL 1.66.0000
So, what do I have dto do now?
Sorry.
Shadow62 said:
Thanks again for your quickness.
But when I want to get my 3.14 on the HD2 it now says "Ongeldige verkoper-ID" - "Invalid Vendor-ID"
I don't understand, I had the 3.14 on the HD2.
It only did not have the SPL 3.03.0000.
?ow I have the SPL 1.66.0000
So, what do I have dto do now?
Sorry.
Click to expand...
Click to collapse
The "Ongeldige verkoper-ID" is the error that say's you that you are trying to install a stock ROM that don't match your device.
Mostly because peoples have a branded device and are trying to install a normal stock ROM.
Did you use your (not from someone els) S/N to download the stock ROM from the HTC Webpage?
Nope, used the Netherlands S/N from XDA Developers.
Bought the phone in Germany, and there was allready a HSPL on it.
Not sure wich ROM originaly was on it.
Think I'm going back to Stock ROM 1.66.
Worked fine.
Strange that I could replace it by 3.14 though.
But of course the SPL did not change to 3.03
Shadow62 said:
Nope, used the Netherlands S/N from XDA Developers.
Bought the phone in Germany, and there was allready a HSPL on it.
Not sure wich ROM originaly was on it.
Think I'm going back to Stock ROM 1.66.
Worked fine.
Strange that I could replace it by 3.14 though.
But of course the SPL did not change to 3.03
Click to expand...
Click to collapse
That's the problem sir. Your device is a originally German Device.
Like I mention before for Stock ROM 3.14 you can't use HSPL and you need to use YOUR S/N to download/install the correct 3.14 stock ROM.
Ons you have install the right/correct stock ROM (German version in your case) than extract the NLD 3.14 stock rom and use the RUU_signed.nbh from the NLD stock ROM and install this by using SSPL_RUU.exe
So, conclusion:
- Don't use HSPL
- Install the correct 3.14 stock ROM (German version)
- Install then the NLD version by using SSPL_RUU
Thanks again.
Excellent and detailed info.
Bur with my own number it now says that my S/N does not qualify for download an available Stock ROM 3.14 from the HTC site.
So I think it's a WWE version?
I downgraded again to 1.66.
Al programs working fine.
Will a HSPL 3.03 follow in the future?
Again, thanks for your effort.
Shadow62 said:
Thanks again.
Excellent and detailed info.
Bur with my own number it now says that my S/N does not qualify for download an available Stock ROM 3.14 from the HTC site.
So I think it's a WWE version?
I downgraded again to 1.66.
Al programs working fine.
Will a HSPL 3.03 follow in the future?
Again, thanks for your effort.
Click to expand...
Click to collapse
Hmm, I see.
About a compatible HSPL version with SPL 3.03 It's a wail now that SPL 3.03 exist and till here there is no feedback/reply if a new HSPL version will/and when it will be created.
But concern your cases; probably you have a branded German device (who don't have received a 3.14 stock ROM updated.)
The only thing you can do is use the GoldCard Technique. >> Read more info about it here <<
Don't think it's branded.
I was able to put Stock ROM 3.14NL on it, with HSPL.
Only issue was that SPL did not change.
Shadow62 said:
Don't think it's branded.
I was able to put Stock ROM 3.14NL on it, with HSPL.
Only issue was that SPL did not change.
Click to expand...
Click to collapse
Trust me; it's branded.
And yes, it is normal that you can install a other stock ROM on your device if you have/use HSPL (that's the force of HSPL).
But like you already know, HSPL isn't compatible with Stock ROM 3.14 so the only solution left if you will upgrade to 3.14 stock ROM is to use the GoldCard technique.
I currently have a MIUI android ROM installed but want to go back to WinMo 6.5 (stock). Now when i try to flash the ROM like i did before, its says on my PC USB Init failed, connection problem. The bootloader screen does say usb. Also when I try to flash trough the MAGLDR flash modus there is USB standing but i cant flash. I've also tried flashing the stock ROM from my SD card as an NBH file but it wont work.. Also repartitioning and all the stuff dont work because they all have te connection problem. I have tried multiple USB cables. Anyone know a solution??
you say that the SD flash doesn't work, can you elaborate a bit more?
explain everything you did, what ROM did you try, if you can give me the whole step by step you tried to SD card flash, including and file name changes etc
SD flash is usually the last resort and if you tried it with a genuine original Stock ROM it should work, albeit it will change the RADIO, SPL and ROM at the same time...
Hello,
I intend to downgrade my hd2 Europe version, from Android with Magldr, to stock Rom,
because of some bootloops i encounter after trying install wp7, so i want to start from scratch and try flashing wp7 or Android again!
I have HSPL 2.08 and i want to flash a Greek Stock Rom
(RUU_Leo_S_HTC_ELL_3.14.482.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship)
OR
(HTC HD2-RUU_Leo_HTC_ELL_1.66.482.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship_2).
My radio is 2.15.50.14.
So far i have made some research and i understand that:
1st. i must flash a stock Rom from SD.
2nd. The hspl will be replaced with stock SPL. Do i need to flash HSPL 3.03, as 3.14 ROMs on HTC HD2 Eu require SPL 3.03.0000 or HSPL 3.03, before flashing stock Rom from SD? What about 1.66 Rom?
The stock SPL version depends from the Rom which i would choose, or will be the same?
after that I just need to run HSPL4, install HSPL2.08 and continue with Magldr as i have done in the past?
Is there something I should be extremely careful so as not I have a fatal problem?
Thanks in advance everyone who will help a confused man!!!
(i don't wanted to start a new thread, so i posted here because of the title)
cmour said:
Hello,
I intend to downgrade my hd2 Europe version, from Android with Magldr, to stock Rom,
because of some bootloops i encounter after trying install wp7, so i want to start from scratch and try flashing wp7 or Android again!
I have HSPL 2.08 and i want to flash a Greek Stock Rom
(RUU_Leo_S_HTC_ELL_3.14.482.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship)
OR
(HTC HD2-RUU_Leo_HTC_ELL_1.66.482.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship_2).
My radio is 2.15.50.14.
So far i have made some research and i understand that:
1st. i must flash a stock Rom from SD.
2nd. The hspl will be replaced with stock SPL. Do i need to flash HSPL 3.03, as 3.14 ROMs on HTC HD2 Eu require SPL 3.03.0000 or HSPL 3.03, before flashing stock Rom from SD? What about 1.66 Rom?
The stock SPL version depends from the Rom which i would choose, or will be the same?
after that I just need to run HSPL4, install HSPL2.08 and continue with Magldr as i have done in the past?
Is there something I should be extremely careful so as not I have a fatal problem?
Thanks in advance everyone who will help a confused man!!!
(i don't wanted to start a new thread, so i posted here because of the title)
Click to expand...
Click to collapse
just follow the guide on the relevant ROM that your interested in
but if your playing with WP then use HSPL 2.08
if your flashing a stock ROM via SD as you pointed out it will replace the SLP with the one that comes with that ROM, so it doesn't matter what you do, then you can use HSPL4 to install the required version for the ROM that you want to use. You can use HSPL 4 to revert back to a stock SPL as well, but if you have any doubt at all then just re flash a original stock ROM, you cant go wrong at all then
Well, if i try to flash anything from my pc it says connection error. When I use flasher modus the HD2 freezes and i need to pull out the battery. I also tried flashing the stock ROM from my SD card but that also doesnt work. I use MAGLDR 1.13 and HSPL 2.08 i think. The current ROM is MyMIUI V11.
i managed to install the stock rom but now i cannot install magldr. When i start the installation the hd2 shows bootloader, then goes into the installation screen but after 1 second it flashes back to bootloader.. any help?
are you putting the phone in to the tri coloured bootloader with the word "serial" at the bottom? plug in to a USB port and the word changes to "USB" then install MAGLDR?
just so im clear what you have tried