I currently have a MIUI android ROM installed but want to go back to WinMo 6.5 (stock). Now when i try to flash the ROM like i did before, its says on my PC USB Init failed, connection problem. The bootloader screen does say usb. Also when I try to flash trough the MAGLDR flash modus there is USB standing but i cant flash. I've also tried flashing the stock ROM from my SD card as an NBH file but it wont work.. Also repartitioning and all the stuff dont work because they all have te connection problem. I have tried multiple USB cables. Anyone know a solution??
you say that the SD flash doesn't work, can you elaborate a bit more?
explain everything you did, what ROM did you try, if you can give me the whole step by step you tried to SD card flash, including and file name changes etc
SD flash is usually the last resort and if you tried it with a genuine original Stock ROM it should work, albeit it will change the RADIO, SPL and ROM at the same time...
Hello,
I intend to downgrade my hd2 Europe version, from Android with Magldr, to stock Rom,
because of some bootloops i encounter after trying install wp7, so i want to start from scratch and try flashing wp7 or Android again!
I have HSPL 2.08 and i want to flash a Greek Stock Rom
(RUU_Leo_S_HTC_ELL_3.14.482.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship)
OR
(HTC HD2-RUU_Leo_HTC_ELL_1.66.482.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship_2).
My radio is 2.15.50.14.
So far i have made some research and i understand that:
1st. i must flash a stock Rom from SD.
2nd. The hspl will be replaced with stock SPL. Do i need to flash HSPL 3.03, as 3.14 ROMs on HTC HD2 Eu require SPL 3.03.0000 or HSPL 3.03, before flashing stock Rom from SD? What about 1.66 Rom?
The stock SPL version depends from the Rom which i would choose, or will be the same?
after that I just need to run HSPL4, install HSPL2.08 and continue with Magldr as i have done in the past?
Is there something I should be extremely careful so as not I have a fatal problem?
Thanks in advance everyone who will help a confused man!!!
(i don't wanted to start a new thread, so i posted here because of the title)
cmour said:
Hello,
I intend to downgrade my hd2 Europe version, from Android with Magldr, to stock Rom,
because of some bootloops i encounter after trying install wp7, so i want to start from scratch and try flashing wp7 or Android again!
I have HSPL 2.08 and i want to flash a Greek Stock Rom
(RUU_Leo_S_HTC_ELL_3.14.482.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship)
OR
(HTC HD2-RUU_Leo_HTC_ELL_1.66.482.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship_2).
My radio is 2.15.50.14.
So far i have made some research and i understand that:
1st. i must flash a stock Rom from SD.
2nd. The hspl will be replaced with stock SPL. Do i need to flash HSPL 3.03, as 3.14 ROMs on HTC HD2 Eu require SPL 3.03.0000 or HSPL 3.03, before flashing stock Rom from SD? What about 1.66 Rom?
The stock SPL version depends from the Rom which i would choose, or will be the same?
after that I just need to run HSPL4, install HSPL2.08 and continue with Magldr as i have done in the past?
Is there something I should be extremely careful so as not I have a fatal problem?
Thanks in advance everyone who will help a confused man!!!
(i don't wanted to start a new thread, so i posted here because of the title)
Click to expand...
Click to collapse
just follow the guide on the relevant ROM that your interested in
but if your playing with WP then use HSPL 2.08
if your flashing a stock ROM via SD as you pointed out it will replace the SLP with the one that comes with that ROM, so it doesn't matter what you do, then you can use HSPL4 to install the required version for the ROM that you want to use. You can use HSPL 4 to revert back to a stock SPL as well, but if you have any doubt at all then just re flash a original stock ROM, you cant go wrong at all then
Well, if i try to flash anything from my pc it says connection error. When I use flasher modus the HD2 freezes and i need to pull out the battery. I also tried flashing the stock ROM from my SD card but that also doesnt work. I use MAGLDR 1.13 and HSPL 2.08 i think. The current ROM is MyMIUI V11.
i managed to install the stock rom but now i cannot install magldr. When i start the installation the hd2 shows bootloader, then goes into the installation screen but after 1 second it flashes back to bootloader.. any help?
are you putting the phone in to the tri coloured bootloader with the word "serial" at the bottom? plug in to a USB port and the word changes to "USB" then install MAGLDR?
just so im clear what you have tried
Related
Like the title says, im just stuck at bootloader and instead of booting to the white screen it just stays on bootloader and says "SERIAL".
Ive googled, youtubed, and searched here, and many have the same problem, but i have yet to seen a solution to this.
I have tried android and many custom roms, and now im back on original ROM and everything works great. BUT i have HSPL in my phone and i dont want it for now.
It is a very easy procedure in the guides and should not be a problem, but please how can i get my LEOIMG.nbh to boot from my memorycard?
It is formated FAT32, and i have tried redownload the stock rom and unpacked it with winrar several times, but the result is always the same.
Is there some way to go around this? I Just wanna boot from the memorycard and restore my phone.
FYI, the restore is just for warranty issues.. I just want to be able to go back just to be on the safe side..
Then after that i can try the cooked roms all days
Thanks!
What size is the microSD card? As there has been reports of problems flashing from 16GB cards.
While in bootloader mode, you can plug in the microUSB and the 'Serial' should be replaced by 'USB'. This means that you can run the flashing from the computer (just ignore the requirement for ActiveSync).
Thanks for the quick reply!
I have a 8 GB memorycard.
Just before i read your post i inserted the usbcable and the screen on my htc says "USB".
But how do i uninstall HSPL from my PC in usbmode? Use customRUU and place LEOIMG.nbh in that folder?
If you install either the HTC Stock or your mobile provider's ROM (what ever you need for warranty requirements), they will flash your phone with SPL, ROM and RADIO.
These ROMs are avaiable from your mobile provider's website or via a link in the ROM Section.
Sounds great!
So i just run the original .exe file from my PC when my HTC HD2 is in bootloader screen in USB-mode, correct?
I have alreade flashed with original rom from PC when my phone was online. But then the HSPL did not go away even though my original rom was installed.
I could use alittle help too
when i try to update it stops at 4% tried to flash other energy roms with the same issue. don't know what todo to get past 4%
fred_up said:
If you install either the HTC Stock or your mobile provider's ROM (what ever you need for warranty requirements), they will flash your phone with SPL, ROM and RADIO.
These ROMs are avaiable from your mobile provider's website or via a link in the ROM Section.
Click to expand...
Click to collapse
won't flash the spl over usb whilst hspl is installed.
H4z3 said:
Sounds great!
So i just run the original .exe file from my PC when my HTC HD2 is in bootloader screen in USB-mode, correct?
I have alreade flashed with original rom from PC when my phone was online. But then the HSPL did not go away even though my original rom was installed.
Click to expand...
Click to collapse
use the hspl.exe program to remove hspl just like you used it to apply it. just choose a stock spl instead of the hspl.
example, regular hd2, wants to go back to o2 stock everything.
run hspl2, choose 1.66.0000
run the o2 1.72.exe rom over usb.
all done.
if the rom doesn't flash its not the correct stock rom.
samsamuel said:
use the hspl.exe program to remove hspl just like you used it to apply it. just choose a stock spl instead of the hspl.
example, regular hd2, wants to go back to o2 stock everything.
run hspl2, choose 1.66.0000
run the o2 1.72.exe rom over usb.
all done.
if the rom doesn't flash its not the correct stock rom.
Click to expand...
Click to collapse
At first i used HSPL 3 to install 2.08.0000 HSPL.
But if i run that file again i only have the choice 2.08.0000.
I downloaded a previous version of HSPL, and there i could choose SPL 1.42.0000 wich was my original SPL version before the flash.
Is this a correct way to do this?
I am asking again because even though i now am at the original ROM and Original SPL version the Radio and Protokoll-version differs from the versions when i bought the telephone.
radio and protocol doesn't matter. yes you've done it right. so long as its a stock rom and the spl ends 0000 then it's fine.
Ok thanks!
Then everything is ok now and i am very happy for that, so thanks for all answers!
I can also add that i took my original SD-card (2GB) and put the LEOIMG.nbh on it.
The bootsequence then started ok when holding down volumebutton and power on.
But the result was exactly the same as it was when flashing to stock SPL with HSPL2 utility.
So the booting-problem was memorycard related.. So it seems that even some 8 gb memorymodules have problems.
Just thought you should know.
Howdy all,
Had ANdroid on the HD2 and wanting to revert back to the original ROM.
Have downloaded a stock rom (3.14 WWE) and have used task 29 to clean up the phone.
Trying to install the rom gives an error: 209: Invalid Vendor ID.
THe phone shows it get to 1% and then reset itself.
I have tried 1.32 Radio, 1.66 and 2.08, all giving the same result (Except for 2.08 wouldnt even get to 1%)
Completely stuck here...
Any help would be great.
Also, read about flashing from SD, but because i've used task 29 the phone has no ROM to boot to. Plus I couldnt figure out how to extract the RUU_signed.nbh from the original .exe
Maybe i've done something wrong?
Any help would be great.
Cheers
Oky, lets start with the beginning.
Error: 209: (Invalid Vendor ID) means that the stock ROM you are try to install isn't the right one. Probably you have a branded device; ore you need to install a otter aria Rom.
Secondly Stock ROM 3.14 isn't compatible with HSPL; so you need to remove it (use HSPL2_RUN.exe to remove HSPL and select SPL 1.66 instead.)
PS, you don't need to install separately a Radio version. Ons you have install Stock Rom 3.14 you will have automatic Radio 2.15.50.14
The important thing is to install a correct stock ROM who match with your device. (witch was your official ROM version?)
kurt-willems said:
Oky, lets start with the beginning.
Error: 209: (Invalid Vendor ID) means that the stock ROM you are try to install isn't the right one. Probably you have a branded device; ore you need to install a otter aria Rom.
Secondly Stock ROM 3.14 isn't compatible with HSPL; so you need to remove it (use HSPL2_RUN.exe to remove HSPL and select SPL 1.66 instead.)
PS, you don't need to install separately a Radio version. Ons you have install Stock Rom 3.14 you will have automatic Radio 2.15.50.14
The important thing is to install a correct stock ROM who match with your device. (witch was your official ROM version?)
Click to expand...
Click to collapse
Sorry i meant SPL.....
Bought the phone from Mobicity and it was imported from Thailand originally....I have previously installed this exact same ROM i am trying to install now....
but after putting Andriod on the device...trying to revert it back is proving impossible.....
I am giving the phone to a friend and thats why i want a stock ROM back on it.....
ftosam said:
Sorry i meant SPL.....
Bought the phone from Mobicity and it was imported from Thailand originally....I have previously installed this exact same ROM i am trying to install now....
but after putting Andriod on the device...trying to revert it back is proving impossible.....
I am giving the phone to a friend and thats why i want a stock ROM back on it.....
Click to expand...
Click to collapse
Stock ROM 3.14 WWE (3.14.413.2) can't be install on a Thailand Rom version !?
Secondly Task 29 isn't compatible with SPL 3.03 neater.
Thirdly I don't see way you need to revers back to a stock ROM (because you mention that Android was the reason (Android isn't install on your device, but on SD. So it don't change your internal ROM))
Okay; what you can try to do is flashing over SD.
but you need to use a original stock ROM and not the WWE (3.14.413.2) you need the version of Thailand (if this was your original!?) (Asia_WWE_3.14.707.3)
- Download your original stock ROM
- Use WinZip to extract it; and extract the RUU_signed.nbh file
- Rename the .nbh file to "leoimg.nbh" place it on a SD (take a 2GB SD) who was been format (FAT32)
- Shut Down your device, enter your SD, hold volume down button, and shortly press on the power button.
- follow the instructions on your screen.
But like mention early'r you need to use the right stock ROM version!
kurt-willems said:
Stock ROM 3.14 WWE (3.14.413.2) can't be install on a Thailand Rom version !?
Secondly Task 29 isn't compatible with SPL 3.03 neater.
Thirdly I don't see way you need to revers back to a stock ROM (because you mention that Android was the reason (Android isn't install on your device, but on SD. So it don't change your internal ROM))
Okay; what you can try to do is flashing over SD.
but you need to use a original stock ROM and not the WWE (3.14.413.2) you need the version of Thailand (if this was your original!?) (Asia_WWE_3.14.707.3)
- Download your original stock ROM
- Use WinZip to extract it; and extract the RUU_signed.nbh file
- Rename the .nbh file to "leoimg.nbh" place it on a SD (take a 2GB SD) who was been format (FAT32)
- Shut Down your device, enter your SD, hold volume down button, and shortly press on the power button.
- follow the instructions on your screen.
But like mention early'r you need to use the right stock ROM version!
Click to expand...
Click to collapse
Thanks! that worked, but now it is stuck in Taiwanese ? is there a way to change it to english, as when i purchased the phone it was all in english?
ftosam said:
Thanks! that worked, but now it is stuck in Taiwanese ? is there a way to change it to english, as when i purchased the phone it was all in english?
Click to expand...
Click to collapse
Based on the fact that stock ROM 3.14 use SPL 3.03 who isn't compatible with HSPL you can't change your stock ROM version by using HSPL.
But if you used the GoldCard technique you can install a otter stock ROM version.
kurt-willems said:
Based on the fact that stock ROM 3.14 use SPL 3.03 who isn't compatible with HSPL you can't change your stock ROM version by using HSPL.
But if you used the GoldCard technique you can install a otter stock ROM version.
Click to expand...
Click to collapse
HSPL is not on my phone, only SPL 1.66 ...... I had to flash using USB as SD card way would not work .....
There must be a way of doing this only because when i received my phone it was in english so i really dont understand,,,,i just want a stock ROM in english.....
ftosam said:
HSPL is not on my phone, only SPL 1.66 ...... I had to flash using USB as SD card way would not work .....
There must be a way of doing this only because when i received my phone it was in english so i really dont understand,,,,i just want a stock ROM in english.....
Click to expand...
Click to collapse
Sorry sir, I can't follow you
You mentioned to have install Stock rom 3.14 correctly; but now you mention to have "SPL 1.66"
If you have install stock ROM 3.14 correctly like mention before you will have SPL 3.03!
And like I mention before if you will install latest stock ROM 3.14 WWE (3.14.413.2) on your Taiwanese device (x.XX.707.x) you need to use the GoldCard technique!
We dont have spl 3 could that be why the other ROMs woulnt work?
How do i get Spl 3?
ftosam said:
We dont have spl 3 could that be why the other ROMs woulnt work?
How do i get Spl 3?
Click to expand...
Click to collapse
When you install stock ROM 3.14 correctly it will upgrade automatically your SPL version to 3.03!
But it seems fore one ore a other reason it didn't do it correctly.
Connect your device by active sync, and run "RUU_Leo_S_hTC_Asia_WWE_3.14.707.3" as administrator, to install it again.
I don't know from where you get the original stock ROM; but to be sure download it again: RUU_Leo_S_hTC_Asia_WWE_3.14.707.3
I have no idea why it is still not working getting the same error as before, the only ROM that will install is the one that is not in english
I wont work it still gives me the same error as before invalid vendor .....
I dont know how to fix this i just want a stock ROM in english....
ftosam said:
I wont work it still gives me the same error as before invalid vendor .....
I dont know how to fix this i just want a stock ROM in english....
Click to expand...
Click to collapse
ftosam said:
I have no idea why it is still not working getting the same error as before, the only ROM that will install is the one that is not in english
Click to expand...
Click to collapse
Sir did you listen/follow my previous instructions!!!???
You can't install a WWE stock ROM (3.14.413.2) on your Taiwanese device (x.XX.707.x) you need to use the GoldCard!!!
It didnt work, it still gives error and i tried the goldcard way but it doesn't load anything i quickly flashes a screen that says loading and then it goes back to the boot loader and just stays there.....
ftosam said:
It didnt work, it still gives error and i tried the goldcard way but it doesn't load anything i quickly flashes a screen that says loading and then it goes back to the boot loader and just stays there.....
Click to expand...
Click to collapse
I have the impression that you are doing something that's isn't correct.
Lot of peoples who I know have used the Goldcard technique; and all without issues.
Ended up getting the goldcard to work (Used a different SD Card)....
However it STILL comes up with the same error. (If I try flashing wwe Asia from the sd card, it says " Not Allowed")
We have previously used all sorts or ROMs on this phone... but the same ROMs now seem to be giving this Vendor Error... It just doesnt make sense...
I have a very big problem. Yesterday i decidet to instal NAND Androin into my HTC HD2. In first step on my 1.66 stock ROM i instaled this http://forum.xda-developers.com/showpost.php?p=6891358&postcount=1893 (HSPL3 and choose 2.08.0000). Everything flashing great but after thad i sow that i have a 2.07.51.22_2 radio version... so i decided to install 3.14 stock rom but i cant I was trying remove hspl but in boot screen i only seen "loading..." (my 2GB SD card was formated in FAT32 and i extracted file from ship but it doeosn't work). My question is what should i do to upgrade my phine to stock 3.14 ? Please help me
Sorry for my english
XFarellX said:
I have a very big problem. Yesterday i decidet to instal NAND Androin into my HTC HD2. In first step on my 1.66 stock ROM i instaled this http://forum.xda-developers.com/showpost.php?p=6891358&postcount=1893 (HSPL3 and choose 2.08.0000). Everything flashing great but after thad i sow that i have a 2.07.51.22_2 radio version... so i decided to install 3.14 stock rom but i cant I was trying remove hspl but in boot screen i only seen "loading..." (my 2GB SD card was formated in FAT32 and i extracted file from ship but it doeosn't work). My question is what should i do to upgrade my phine to stock 3.14 ? Please help me
Sorry for my english
Click to expand...
Click to collapse
Don"t use stock ROM 3.14 if you will install/use NAND!
Stock ROM 3.14 isn't compatible with HSPL; and you will need HSPL for NAND.
Just install/upgrade your Radio version on your 1.66 stock ROM.
hmm but i want to have a 3.14 rom version costum or stock but i dont know how to do it. Could you help me ? How can i upgrade radio version ?? If i do this can i instal NAND Android ?
XFarellX said:
hmm but i want to have a 3.14 rom version costum or stock but i dont know how to do it. Could you help me ? How can i upgrade radio version ?? If i do this can i instal NAND Android ?
Click to expand...
Click to collapse
Like I mentioned before, if your attention is to use/install NA ROMND.
DON'T use stock ROM 3.14! NAND needs HSPL, and this isn't possible in combination with stock ROM 3.14!!!
Just upgrade your radio.
Yeah u should just upgrade your radio. no need to upgrade to 3.14.
I do not see the necessitiy to upgrade to 3.14 if you want to run Android NAND.
What you need to do is to start all over again.
1. Extract RUU_unsigned.nbh from stock 1.66 ROM, rename as leoimg.nbh, copy this file to the root of your SDCard.
2. Pop SDCard into device, Activate bootloader and it will load back your device to 1.66 stock condition.
3. HSPL your device again using HSPL3.
4. Upgrade your radio to whatever your liking (e.g 2.15 etc)
5. Flash any 3.14 custom ROM avaialble at this wonderful site.
cymagnus said:
5. Flash any 3.14 custom ROM available at this wonderful site.
Click to expand...
Click to collapse
Finally got an answer, so HSPL only not recommended for stock 3.14 ROM, but for custom ROM it's doesn't matter. Then we should use SSPL to flash this custom ROM right?
Thanks
cymagnus said:
Yeah u should just upgrade your radio. no need to upgrade to 3.14.
I do not see the necessitiy to upgrade to 3.14 if you want to run Android NAND.
What you need to do is to start all over again.
1. Extract RUU_unsigned.nbh from stock 1.66 ROM, rename as leoimg.nbh, copy this file to the root of your SDCard.
2. Pop SDCard into device, Activate bootloader and it will load back your device to 1.66 stock condition.
3. HSPL your device again using HSPL3.
4. Upgrade your radio to whatever your liking (e.g 2.15 etc)
5. Flash any 3.14 custom ROM avaialble at this wonderful site.
Click to expand...
Click to collapse
Ok, but in stock ship i have a RUU_signed.nbh not unsigned
XFarellX said:
Ok, but in stock ship i have a RUU_signed.nbh not unsigned
Click to expand...
Click to collapse
Yes you are right, maybe cymagnus mean was RUU_signed.nbh
erwinpiero said:
Finally got an answer, so HSPL only not recommended for stock 3.14 ROM, but for custom ROM it's doesn't matter. Then we should use SSPL to flash this custom ROM right?
Thanks
Click to expand...
Click to collapse
The only problem using SSPL is that you cant flash radio and you cant do task 29
As suggested in forums, you have to do task 29 before flashing rom in order to clean up the memory. If you use SSPL, you cant do that. So there is possibility that you will find bug(s) originating from previous rom.
Cheers...
XFarellX said:
I have a very big problem. Yesterday i decidet to instal NAND Androin into my HTC HD2. In first step on my 1.66 stock ROM i instaled this http://forum.xda-developers.com/showpost.php?p=6891358&postcount=1893 (HSPL3 and choose 2.08.0000). Everything flashing great but after thad i sow that i have a 2.07.51.22_2 radio version... so i decided to install 3.14 stock rom but i cant I was trying remove hspl but in boot screen i only seen "loading..." (my 2GB SD card was formated in FAT32 and i extracted file from ship but it doeosn't work). My question is what should i do to upgrade my phine to stock 3.14 ? Please help me
Sorry for my english
Click to expand...
Click to collapse
Firstly, 2.08.0000 is NOT hspl, it is a stock spl version. You need to select 2.08.hspl when running HSPL3. To flash a new radio there is no need to install the whole rom, just download and flash the radio. Click on the link in my signature for my radio and there are plenty of standalone radio roms there. Flash the same way as a rom (as long as you have hspl installed).
If you are wanting to go Android don't install 3.14, just do the abovementioned items. If you really do want to go stock 3.14 rom, then you can do this once hspl is installed BUT it is not recommended and it is better to use the Goldcard method.
silverwind said:
The only problem using SSPL is that you cant flash radio and you cant do task 29
As suggested in forums, you have to do task 29 before flashing rom in order to clean up the memory. If you use SSPL, you cant do that. So there is possibility that you will find bug(s) originating from previous rom.
Cheers...
Click to expand...
Click to collapse
Ow i see, thank you for your clear explanation Mas, yes when we had HSPL then we can play a lot and it's a must to use task29. My misunderstanding too, if we flash HSPL then we could flash any ROMs, so we don't need SSPL. But still HSPL was not recommended for 3.14 stock ROM. I hope my conclusion is right.
Thank You
dude u need to go to the bootloader power and vol down.. and then flash... not the usb flasher in magldr.. hit thanks if this was the problem
erwinpiero said:
Yes you are right, maybe cymagnus mean was RUU_signed.nbh
Click to expand...
Click to collapse
Opps.. yeah it's RUU_signed.nbh. Got mix up with Nokia stuffs. lol.
ClydeB1 said:
Firstly, 2.08.0000 is NOT hspl, it is a stock spl version. You need to select 2.08.hspl when running HSPL3. To flash a new radio there is no need to install the whole rom, just download and flash the radio. Click on the link in my signature for my radio and there are plenty of standalone radio roms there. Flash the same way as a rom (as long as you have hspl installed).
If you are wanting to go Android don't install 3.14, just do the abovementioned items. If you really do want to go stock 3.14 rom, then you can do this once hspl is installed BUT it is not recommended and it is better to use the Goldcard method.
Click to expand...
Click to collapse
Thanks a lot !! Could you tell me how to instal stock 3.14 step by step ? I feel green in this topic
Stock 3.14 ROM won't be a good idea. There are many beautiful ROMs over there which give you the freedom to enjoy 576MB of RAM with proper radio versions. Stock is no good.. Be careful of what radio version you have while flashing ROMs as incompatible radio may prevent the phone from booting. Before installing android, check the compatible radio versions and install one before doing anything Check this for more info step by step http://forum.xda-developers.com/showthread.php?t=732380
Thanks, but i want install stoc rom 3.14 and i don't know how to do it because i have spl 2.08.0000 instaled via HSPL3. Someone can help me ? I don't wanna install android or any costum rom. Please help... i need stock rom 3.14
Okay! Download the 3.14 ROM from correct HTC website for your country. Once downloaded, open with WinRAR and extract RUU_signed.nbh to any folder. Rename it to LEOIMG.nbh and copy it to the root of your memory card. Make sure your memory card is formatted with FAT32 partition method. Insert the card in your phone (while phone is switched off) and hold the 'Volume down' button. Press power button while the Vol down button is pressed. Your phone will enter bootloader and you'll be able to flash the ROM. By this method, even if you have HSPL installed, it will be overwritten by stock SPL 3.03
Happy flashing! Dont forget to backup your personal data!
XFarellX said:
Thanks, but i want install stoc rom 3.14 and i don't know how to do it because i have spl 2.08.0000 instaled via HSPL3. Someone can help me ? I don't wanna install android or any costum rom. Please help... i need stock rom 3.14
Click to expand...
Click to collapse
Will you make your mind up. Firstly you wanted Android installed, then it was 3.14 custom or stock and now it is only 3.14 Stock ROM.
Thankfully you have the SPL of 2.08.0000, which means that HSPL has been removed.
Go to HTC's website and download the 3.14 ROM with your phone's serial number. If you are allowed to download the file, then there should be no problem in running it from your PC. If you get a 'you are not allowed to download this file', then you have to use the GoldCard method.
Whats wrong... I download from HTC site stock rom 3.14. Program found my phone and current instal version (1.66), when i click update status bar is still on 0% (after 20 minutes i desconect phone and turn on - everything works great but in 1.66 rom :/). After that i was trying updated via gold card method ( i prepared 2GB micro SD card - format in FAT32 and copy rename nbh file) but when i'm swith on my HD2 holding volume down button on the screen i can see "loading..." and nothing more
XFarellX said:
Whats wrong... I download from HTC site stock rom 3.14. Program found my phone and current instal version (1.66), when i click update status bar is still on 0% (after 20 minutes i desconect phone and turn on - everything works great but in 1.66 rom :/). After that i was trying updated via gold card method ( i prepared 2GB micro SD card - format in FAT32 and copy rename nbh file) but when i'm swith on my HD2 holding volume down button on the screen i can see "loading..." and nothing more
Click to expand...
Click to collapse
Did you downloaded the right stock ROM by using your S/N?
I own a new HD2....and now i think i bricked it.
I installed HSPL3 on my device and then MAGLDR113 but after reboot nothing happened just white screen and green htc logo
I tried to uninstall HSPL according to manual stated in you tube but loading got lost just after a blink.
My phone is showing this info in bootloader....
PB81100 SS-BC
SPL-2.08.HSPL 8G XE
0x05
CotullsHSPL 0x50
PLeaseeeeeeee help me out.....i beg all
look at my post sounds like mine
check out post 9 in this thread sounds like mine http://forum.xda-developers.com/showthread.php?t=961001
not sure if you are tmous tho you may want to start with your shipped or test masd 2.02 rom
As far I can remember, all tutorials said that hspl can be just "uninstalled".
The only way to get rid of hspl (and maglr at once) is to flash original rom
BUT FROM SD CARD.
Tutorial how to do that is in the "sticky" (third sticky in this subforum) section.
or better still, finish the process you started. . . apply a rom.
you cant just "apply hspl, apply magldr" and then stop, you gotta enter magldr and flash a wp7/android rom.
also, if you still have the original radio that shipped with your phone, it wont be high enough version to work.
enter bootloader and flash something like radio 2.11.50.x or higher.
This is not an error or fault at all, just plain user failure.
Did you try to flash stock rom? If activesync is not allowing it, then you can try it booting your phone in boot loader mode. But make sure you flash stock rom only.
Alternately you can flash via sd as mentioned by "rtomakov"
Thanks
jeetu1981 said:
Did you try to flash stock rom? If activesync is not allowing it, then you can try it booting your phone in boot loader mode. But make sure you flash stock rom only.
Alternately you can flash via sd as mentioned by "rtomakov"
Thanks
Click to expand...
Click to collapse
Flashing stock rom via usb wont remove hspl!
so dear, you need to know this first...magldr will install in rom replacing your wm6.5......so after you do that you need a nand android build or wp7 to use with magldr or if you want wm 6.5, no need to remove hspl, just reflash the stock 1.48 wwe rom for india...search for that in the forum...this will replace the magldr..........just be sure not to flash the new stock 3.14 wwe rom over hspl..it will produce incompatibilities like small memory....if you want 3.14 rom, first flash stock 1.48 wwe, and then using hspl, uninstall hspl (select 1.42spl )...then install 3.14 wwe rom (be sure to flash india specific roms)
rtomakov said:
Flashing stock rom via usb wont remove hspl!
Click to expand...
Click to collapse
Right, but it will atleast flash a stock ROM, HSPL can be removed later
Thank u ol for helping me out.
Pblm solved I installed new 3.14 rom as it olso upgraded my radio and magldr run after boot successfully.
Now I m using windows7
parkarintl said:
Thank u ol for helping me out.
Pblm solved I installed new 3.14 rom as it olso upgraded my radio and magldr run after boot successfully.
Now I m using windows7
Click to expand...
Click to collapse
That's good to hear. WP7? I flashed it yesterday and then switched back to WM in just 15 minutes, not my cup of tea.
Thanks
This is my first thread so I hope Im not double posting with my question. I am trying to get my HD2 back to stock, I have downloaded the official t-mobile rom from htc. Whenever I try to flash ROM from sd card or any radio it gets stuck at 96% or 99%. I have tried hspl 2.08 and if I do 2.08.0000 nothing will flash at all. I am at my wits end because I have tried every suggestion and have searched high and low through the threads. Any help is appreciated.
Hey! If you installed some other roms (wm, wp or android) you need program task 29!
It will clean your flash memory. After that you need to know what was the original spl on your phone (like 2.08.0000 or 3.05.0000) SPL, not HSPL! Flash your stock SPL! reboot, enter in bootloader again and connect phone in to pc, flash your stock rom while you in bootloader through pc! It works for me 100% Enjoy)