So I have the TG01 and I have tried multiple roms with multiple radios and I have the following issues that I have yet to find solutions to.
My caller id is intermittent it doesn't always work but with my previous phone I had no issue.
Also my SMS timestamp is 4 hours behinda and I have tried every .cab out there.
I am wondering if there are any other Canadians out there using these phones and perhaps not having these issues can shed some light on what their setup is.
Regards,
After testing FFBOY'S TG01 WM6.1 21057+Manila2016 i have found that all my issues were solved however i wonder why i cant achieve this on 6.5.
I found out it has nothing to do with radio or wm version but it had to do with the fact when roaming on at&t it works fine but when on fido it isnt as consistant so I shall call Fido to have my caller id fixed hopefully.
I have the same issue with my fido mobile phone. A short call from any representative can easily fix this or before that try to check your settings and update your dates and time else call the representative or visit any offical store nearest you.
so you have yours fixed?
i already called and they said since its not a fido phone they can not do anything and this is an issue apparently that affects alot of users...
Related
When I first got my xda many months ago, whenever someone called me I would get their number displayed before I pick up. Now it just says "Unknown" and no number. This is an intermittent problem. Occassionally it works, most of the time it doesn't. I have tested this from many phones.
Has anyone else experienced this problem and what can I do about it?
Thanks in advance
Stephen
PS I am using Special edition rom 1.1 and my SP is O2 :?
If it's the same problem with other XDAs or mobiles, then it's related to your SIM or your service provider network. Call them and ask about the service CNIR (Caller Number Identification Restriction). It's a GSM network parameter for each SIM. I believe that some one has activated this service on your SIM by mistake.
Does that cause a intermittent problem? I thought it would either show caller display or not, not a bit of both or am I wrong?
Cheers
Stephen
If it's that intermittent, check in different locations ... sometimes it's a location based problem ... as a good practice, replace the SIM in all cases.
Is it just me or is anyone experiencing a "Forbidden" error when sending/receiving MMS after updating to AT&T's new ROM with 1.14.25.35 Radio?
I've reflashed the updated AT&T ROM and then flashed NRG's latest 6.5 ROM with the correct Rilphone.dll and still have the Error. I even tried sending from the new stock ROM and got the error. I did this multiple times to make sure it wasn't a bad flash and still have the "Forbidden" error. Did I do something wrong when I flashed the new ROM and Radio? The settings in MMS are correct and I didn't load anything else prior to testing MMS.
At first I thought it was AT&T and wasted over 30 minutes with a rep that knew next to nothing. Then it dawned on me that this all started after I updated to the new ROM/Radio release for AT&T on HTC's website. So, I reverted back to the original shipped ROM with 1.02.25.32 Radio, flashed NRG's latest 6.5 ROM and can now send/receive MMS.
I had the same forbidden error and had to talk to tech support from att.. apparently it's because i had placed my sim into an iphone and we all know iphones can't send mms so it registered into their system that i was using an iphone thereby causing the iphones imei to register to my number hence why it's forbidden to send/receive a mms. did you perhaps do something similar?
ATT0001 file can't open it
Hey Guys... sorry than I can't help to solve your problem.. But i have a problem too with the MMS... what happens is that every time I send or receive a mms to a windows mobile phone comes as ATT0001 file and I can not open .. I need help with this thanks
Loner2DEnd: I did but only to unlock one. I've done this before and have never had that problem up. I only noticed that I wasn't able to send/receive MMS after I had the official update from HTC for the FUZE. I was on the phone with the tech and they told me that using my SIM in an iPhone wouldn't have updated my account. You can log onto your online account with AT&T and see what phone/IMEI is registered with your account. Mine still has my FUZE and correct IMEI. Everything is working now that I reflashed the original shipped ROM with the 1.02.25.32 Radio.
I downloaded another copy of the ROM update from HTC for the FUZE and ran the same tests to see if maybe it was a corrupted file/bad flash and I still had the same issues with MMS. My internet still worked but I got the same Forbidden Error. For now, I'm going to just stay with my current (original shipped) Radio since everything's working.
Dannyedilber: I'm not familiar with that Error. Sorry man. I don't know much about MMS and had to do some homework and some trial and error to finally find this solution. Maybe one of the seniors can answer your question.
I've had this problem a few times but usually fixes itself after a reset or a quick disconnect/reconnect of the radio.
I find that if I leave my data on for an extended period of time, it seems to happen. Almost like AT&T is seeing the high traffic and cutting me off.
Also check to make sure you guys don't have Data disabled in your accounts.
@Dannyedilber: I don't even know what an "ATT0001" file is?
@Loner2DEnd: My wife just returned her iPhone because she said it sucks compared to Windows Mobile (smart girl eh?) and went back to her old Samsung Blackjack. We did this yesterday, after her having the iPhone for a little under 30 days. I just sent her a picture and she got it.
From AT&T
The data network works for all of our devices and the Windows Mobile devices are the only ones that seem to have had some issues with the way the data network is configured. Rather than trying to re-configure and potentially break the network for other users, we have been working on a fix for the Windows Mobile issue. We have a fix that will be implemented by the end of this quarter and we should have the problem resolved at that time.
Click to expand...
Click to collapse
From AT&T
Just wanted to let you know that I did get an update. The project to "fix" the 403 error is moving forward. Right now we plan to have the implementation complete in June with Project closure in Early July. I will follow up again in about a month to see the status and provide closure information.
Just for clarification: This project hasn't slipped a month, we keep the project open during a "soak" period to ensure that everything is going as expected. Also, as we apply the fix to the elements in the network the fix will be applied to certain markets and complaints should drop for that market dramatically. I haven't seen this issue in a while here so I believe that the patch has been applied for the Minneapolis market.
Click to expand...
Click to collapse
An easy temporary fix is to put your phone into flight mode and then take it out. A new data connection almost always works. Worst case scenario soft reset the phone.
so its by market then?
I flashed the new rom about last week, had no issues receiving and sending MMS on it and on NATF's 4.7 rom.
Still No MMS
nmbr6 said:
...An easy temporary fix is to put your phone into flight mode and then take it out. A new data connection almost always works. Worst case scenario soft reset the phone.
Click to expand...
Click to collapse
My MMS is not working incoming or outgoing. I have tried it from TF3D2, Titanium, after reset, after airplane mode and reset with no success. I put my SIM card in my backup phone and MMS send and receive worked flawlessly. I do not get the forbidden error message some of you have gotten; it just does not work. I have reset the RegEdit keys several times and they are currently set at 1.2mb. I know that 6oo K is at&t max, but the two test MMS messages are 77K and 317k. Thanks - David.
Black C5 said:
My MMS is not working incoming or outgoing. I have tried it from TF3D2, Titanium, after reset, after airplane mode and reset with no success. I put my SIM card in my backup phone and MMS send and receive worked flawlessly. I do not get the forbidden error message some of you have gotten; it just does not work. I have reset the RegEdit keys several times and they are currently set at 1.2mb. I know that 6oo K is at&t max, but the two test MMS messages are 77K and 317k. Thanks - David.
Click to expand...
Click to collapse
It sounds like you have a different issue altogether. My posts were answers from AT&T strictly for the 403 forbidden issue.
Player911 sorry that I was not very specific...whats happening is when I send a ATT MMS to someone who have a HTC touch pro to her hotmail account.. she can't open it because the picture come as ATT0001.. even when I send att MMS to myself at my email account I receive as a ATT0001
Need help with this guys.. please
Sorry my english
Hi All:
First off thank you for the info in resolving this issue. Since swithing back to the original shipped ROM with radio 1.02.25.32 then flashing EnergyROM 3.0 Phoenix 6/12, I've had no problems with MMS Forbidden Error. It's been a week now and I've had no data/network issues either. I'll try again with the new Radio/ROM this weekend when I have some free time and will report back. Thanks everyone!
Tru using a registry editor and go in and change the registry in Arcsoft under HKLM>Software>Arcsoft>Arcsoft MMS UA>Config>MM1>MMSCSetting>SampleMMSC>Wap1SendDefault and Wap2SendDefault and change to a desired number. For instance, I have 102400 set to send up to 1MB.
See if that allows you to send.
try enabling ATT's proxy. This always works for me.
1. Enable the proxy
2. Kill the data connection
3. Reconnect data
4. Try sending or receiving.
This has worked countless times for me.
I have a huge problem sending text messages.
After typing a messages and trying to send the message it sometimes takes about 30 min. before it is gone. The same problem is with receiving if someone types a message to me and sends it away it sometime takes up to 2h. before i'm receiving.
I already tried serveral radios, changing settings in phone under Services but nothing worked.
Other people with the same Mobile provider don't experience this problem...
Anybody know a solution for this?
Thanks in advanced
I recall reading some posts from other members with similar issues on different carrier networks.
One member ended up contacting the carrier to have them reset his profile.
Another member had to contact the carrier and have them send a new SIM card.
HTH,
i had a problem where I couldn't send or receive them at all.... it occured after I reverted the phone back to stock for warranty... i loaded the latest fuze update, then reverted the spl to 1.90.... wouldnt do sms.... i fixed it by loading the update again, letting it override the spl 1.90 for the newer one 5.10, or whatever it said, i can't remember....
doubt anything i just said has any relevance to ur issue, disregard it all if it doesnt....
Thnx for helping I tried an other sim from an other provider and no problems at all. After searching the forum for a bit I red a lot about changing the sim because it is too old... (1/2 year )
Hey all, i originally posted this problem in January, still no fix.
Wondering if any of the new folks to the forum have any suggestions.
I am using an unlocked TG01 from Orange (UK) on Rogers in Canada (GMT -5), using the official 6.5 ROM. CE OS 5.2.21840 (Build 21840.5.0.60)
My SMS messages recieved are logged 5 hours behind current time. My SMS messages sent are logged at the current time. My suspicion is that it has to do with the origin of the phone, from the UK.
I have searched xda forums and modaco forums, microsoft, and google.
I have total commander, and have modified the registry in a few was, as described below:
I have added the TrustTimeZoneField field dword (in HKLM\System\Phone Settings\OEM ... or whatever it was.)
I have modifed HKLM\Time Zones to include Eastern Standard Time with the proper TZI file.
I have tried to set the timezone to another setting (like GMT -3) reset the phone, and then change it back, and it doesn't not work.
I have download a cab file that was supposed to fix it too.
I am looking for any other ideas, please, and thanks.
Rogers Canada Connections Settings
I followed rogers settings I found on from another site , but although I managed to get the sms working, MMS is still ignoring me. I also cannot connect to the internet/skype using 3G, only wifi, which is quite annoying.
Anyhow, give this a try and see where you get. I found that the Toshiba framework doesn't allow you to add all of these settings, so that might be part of the problem. Anyone have a .cab that might allow for a more comprehensive wifi/3G settings input?
Settings: I followed this from another site , but although I managed to get the sms working, MMS is still ignoring me. I also cannot connect to the internet/skype using 3G, only wifi, which is quite annoying.
Anyhow, give this a try and see where you get. I found that the Toshiba framework doesn't allow you to add all of these settings, so that might be part of the problem. Anyone have a .cab that might allow for a more comprehensive wifi/3G settings input?
source site:modmymoto, forums, thread 17207
Could you provide a direct link to that thread? I'm not able to find it.
ya i got the same problem but with the topaz
Anyone out there got a "new" fix?
Rogers settings
Hi, I can't remember where i found this, but here is a .cab file for rogers EDGE, and sms settings. Works easy for hard resets.
that_dood said:
Hi, I can't remember where i found this, but here is a .cab file for rogers EDGE, and sms settings. Works easy for hard resets.
Click to expand...
Click to collapse
Thanks for the reply. I applied the cab, soft reset, test SMS has the same problem. Time sent 2:16am, time recieved 10:16pm
Bump...........
mms
Did you ever get your mms working?? I got mine going with this http://www.stephenwagner.com/?p=33
I have a T-Mob G2 and sipdroid installed on it. Using a VoIP provider in UK. I have a speedtest app installed which shows 5 mbps download speed 3 mbps upload
People report that they can hear me clear as a bell but I can hear almost nothing. I hear a half second of incoming sound followed by a second or two of silence, then another half second of sound, repeating about 10 times till all incoming sound stops completely.
VoIP provider says yes, some other users OF THEIRS have reported this problem and this is an inherent problem with Android and Android users cant use VoIP. They allude to some mysterious latency problem (which is identifyable on line except that users say it affects OUTGOING sound, not incoming so): I say baloney: There is something wrong with their server. Or can T-Mob recognise that I am trying to use VoIP and i suppose there is a remote chance they are blocking something to prevent me using any VoIP service other than their own (which uses their minutes!!). Cant imagine what they could do to stop me but i can sure imagine why they would want to try!
.
Thread moved. Would advise you to read forum rules and post in correct section.
Sorry about that, I just did a check on questions posted on VoIP and found all of them had been in this section headed 'question and answer'
Sorry I forgot to update this posting for the benefit of others who do a search and find it.
There are only two or three settings which need to be changed from default with most VoIP services, - the sip server, userID and password.
The problem is device and software specific. Unless you have got something obvious VERY wrong indeed, if you have apparently insuperable problems with anything on VoIP, change software. My provider says users have success with lots of different softwares which dont work on my G2 (or my BA or Wizard or 8525 or Wing). They said that most users have success with 3CXPhone which didnt work for me at all.
Immediately I changed to various other ones, the problem completely disappeared. Sometimes new problems arose (they specifically recommend SipDroid with similar lousy results) until I settled on CSipSimple. Since I started using it, I have had no problems at all and it even worked when I switched to a Galaxy S111.
Dont worry too much about the packages which supposedly have all settings pre-installed for your specific provider! Just keep switching apps until you find one which works.