Please help I can't get my vibrant off brick? it went crazy this afternoon when I installed a ROM and I was able to reboot into recovery and wipe the phone to get it working I decided i would try then to use odin and make the phone stock again but idk what happened and now I can't get the phone into dl mode to use odin. my screen is black but my icons are lit up wtf! i've tried every thread i can see to get into DL mode! please help me!
when the phone turns on it does the tmo stock sound and screen then does the galazy s screen then does nothing! adb keep saying "error device not found"
same thing happen to me and i ended up returning my phone.. hopefully you are still in the buyers remorse period and can still exchange your phone.. have you tried removing the battery, plug in the usb cable in the phone and computer, then hold down the vol+ and vol - and power button and then put the battery in?
pinoiryder said:
same thing happen to me and i ended up returning my phone.. hopefully you are still in the buyers remorse period and can still exchange your phone.. have you tried removing the battery, plug in the usb cable in the phone and computer, then hold down the vol+ and vol - and power button and then put the battery in?
Click to expand...
Click to collapse
i tried. i can't seem to get into download mode in any damn way. wtf.
i have my warranty so i might just go to a store tomorrow morning. sigh...
Same thing happened to me yesterday. I had to take mine back to a Tmobile store and are sending me a new one because its under warranty and I have insurance.
But yeah My phone goes therough the TMobile boot animation, the audio seems off set..it used to play when the letters were coming into sequence and now it plays after the TMobile logo has been created for a bit. Then the infinite Galaxy S logo boot screen that sit there for ever than finally just goes black. After which the Four Buttons on the phone will light up but not turn off.
ibuddha said:
Please help I can't get my vibrant off brick? it went crazy this afternoon when I installed a ROM and I was able to reboot into recovery and wipe the phone to get it working I decided i would try then to use odin and make the phone stock again but idk what happened and now I can't get the phone into dl mode to use odin. my screen is black but my icons are lit up wtf! i've tried every thread i can see to get into DL mode! please help me!
when the phone turns on it does the tmo stock sound and screen then does the galazy s screen then does nothing! adb keep saying "error device not found"
Click to expand...
Click to collapse
Did you ever get a resolution to your problem? I am in the same exact boat. No USB, no Odin, no recovery just stuck in a bootloop with a robotic voice stating "Convert data partition, not enough space on partition"
Thanks
You need to Odin back to stock. Did you try installing a rom?
Sent from my SGH-T959 using XDA App
Related
First of all, I'm not sure if my Vibrant is "hardware-locked" or not - the battery has a date of 8/25/10 printed on it, the sticker behind the battery says "10.09." Either way, I cannot get into download mode. The phone was purchased 1 week ago today. I was simply attempting to disable the voodoo lag fix (using bionix 1.3 rom). I have tried every combination of getting the phone into download mode that I can find - is it possible? I sometimes think it's close to working because during the process a window on my computer pops up that says "hardware not installed correctly" which to me means that I was close. Someone please tell me if it's even possible to get my phone into download mode - it will start up, do the samsung galaxy animation, then go to black screen with the bottom buttons lit up. Thank you for any help you can provide - it makes me ill that I spent $500 on this 1 week ago and am now faced with a complete brick.
dsmithok said:
First of all, I'm not sure if my Vibrant is "hardware-locked" or not - the battery has a date of 8/25/10 printed on it, the sticker behind the battery says "10.09." Either way, I cannot get into download mode. The phone was purchased 1 week ago today. I was simply attempting to disable the voodoo lag fix (using bionix 1.3 rom). I have tried every combination of getting the phone into download mode that I can find - is it possible? I sometimes think it's close to working because during the process a window on my computer pops up that says "hardware not installed correctly" which to me means that I was close. Someone please tell me if it's even possible to get my phone into download mode - it will start up, do the samsung galaxy animation, then go to black screen with the bottom buttons lit up. Thank you for any help you can provide - it makes me ill that I spent $500 on this 1 week ago and am now faced with a complete brick.
Click to expand...
Click to collapse
Were you using one click root?
nomadrider123 said:
Were you using one click root?
Click to expand...
Click to collapse
yes, when i rooted it, i used 1-click
Try this:
Take battery out
Put battery back in
DO NOT TURN ON PHONE!
Plug in USB
Wait for the green battery screen
Hold vol+ and vol- at the same time
Hold power
When the battery screen goes black, let go power ONLY.
I had a HW locked phone and this method allowed me to get into DL mode--still couldn't get into recovery, but at least I could use ODIN. Was a null point as the phone is bricked and a new one is on its way...
When you say a new one is on its way, did T-Mobile exchange it under warranty even though it was rooted?
TheSneakerWhore said:
Try this:
Take battery out
Put battery back in
DO NOT TURN ON PHONE!
Plug in USB
Wait for the green battery screen
Hold vol+ and vol- at the same time
Hold power
When the battery screen goes black, let go power ONLY.
I had a HW locked phone and this method allowed me to get into DL mode--still couldn't get into recovery, but at least I could use ODIN. Was a null point as the phone is bricked and a new one is on its way...
Click to expand...
Click to collapse
Sent from my HTC Magic using XDA App
If the above doesn't work.
Plug in USB to PC only
Insure Phone is off
Hold in Vol + and -
Plug in USB to Phone Holding Vol + and -
Release Vol + and -
Walla you are in Download Mode
Neither of these methods worked. what are the chances of t-mobile performing an exchange for me if all else fails?
you could try this too, it worked for me.
remove battery and put it back in.
plug in usb
hold vol up, vol down and power button.
when you see the vibrant home screen, keep holding the three buttons until the screen turns dark.
let go the power button and vol up but keep vol down pressed, you should be in download mode.
hope this help.
Sent from my SGH-T959 using XDA App
Since we all seem to have our own variations of this method, I can tell you the one that worked for me 99.99% of the time on the first try when I was stuck at the Phone ! Computer screen.
1) Remove battery
2) Hold Vol - and Power
3) Insert battery while holding these buttons
4) Plug in USB if it works.
Some have reported T-Mo swapping the device due to the inability to access download/recovery mode, but it doesn't seem to be something they will regularly do. Others have been successful by using the inaccurate GPS issue to get a replacement. Specifically by insisting it is not just inaccurate, but downright non-functional.
dsmithok said:
When you say a new one is on its way, did T-Mobile exchange it under warranty even though it was rooted?
Sent from my HTC Magic using XDA App
Click to expand...
Click to collapse
Yea...I tried relashing the stock rom using ODIN--for 4 hours over and over. It said "successful" in ODIN, but the phone was toast (would go past S boot screen then nothing. Just walked into TMO, said it "just would not do anything" with a feigned puzzled look and after a amateur cursory inspection the rep. just did his thing on the computer and a new phone is being sent to my house via UPS.
I tried to upgrade to froyo using the odin method from this thread http://forum.xda-developers.com/showthread.php?t=853950. After everything was successfully done my phone shut off and now it won't turn on. I don't get a battery charge screen or anything. The phone's just blank.....
First, Get the Shipping rom (pit and tar files) so you can ODIN back to stock
Be sure you have the newest version of ODIN
Then remove the battery, plug the USB to the PC.
Now put the battery back.
Press both vol keys (up and down) and hold.
That should get you in Download Mode.
If it does not work, take battery out, unmplug USB.
Put battery back and try again to go into download mode.
Now you put the wrong version of froyo, if your keys maps are changed you may be screwed
If so, good luck! You are gonna need a lot of research to see if you can save it
i think i'm screwed.....nothing is working
If anyone else could help me with this, it would be great. I'm in between a rock and a wall right now with my phone.
you flashed the wrong rom. You didn't know that, did you?
iynfynity said:
you flashed the wrong rom. You didn't know that, did you?
Click to expand...
Click to collapse
No I didn't know that sadly. Is there anyway I can save my phone?
Hehehehe...I bricked mine yesterday. I disabled voodoo via Voodoo Toggle and waited for Linda to convert. I loaded up Odin and put in my pit & tar for JFD, which I always use, and hit start. I was on Nero v3 going to flash Nero v4 when it came out. I got a Fail part of the way through. The phone won't power on at all.....A popup says Windows can't recognize the device plugged into usb...
I think people are confusing things here and there...if your phone won't power on at all, you can't get help...you can't get into download mode to odin or recover it.
Like mine, for instance, there is no amount of times taking the battery out or doing this or that is gonna fix it..We need to read the post before we try to offer help...IF IT WON'T POWER ON how can people post ways to ODIN or RECOVER...
I'm just sayin....
jmcghee1973 said:
Hehehehe...I bricked mine yesterday. I disabled voodoo via Voodoo Toggle and waited for Linda to convert. I loaded up Odin and put in my pit & tar for JFD, which I always use, and hit start. I was on Nero v3 going to flash Nero v4 when it came out. I got a Fail part of the way through. The phone won't power on at all.....A popup says Windows can't recognize the device plugged into usb...
I think people are confusing things here and there...if your phone won't power on at all, you can't get help...you can't get into download mode to odin or recover it.
Like mine, for instance, there is no amount of times taking the battery out or doing this or that is gonna fix it..We need to read the post before we try to offer help...IF IT WON'T POWER ON how can people post ways to ODIN or RECOVER...
I'm just sayin....
Click to expand...
Click to collapse
Well right now I'm simply trying to get the phone to turn on which it won't, I was not asking for help to odin or recover. I was trying to ask if anyone else had this problem and if my phone is totally killed or if there's a possibility that i can save it. But thanks for your 2 cents.
Me too
I had ordered Samsung Vibrant Unlocked from T-Mobile USA around a month back. I am well past the 30 day replacement now.
I Rooted it updated to Axura 2.2.5.9
After all the procedure got completed, I rebooted the phone and now it just won't start at all.
My piece is Hardware Locked wherein I can't get into the Recovery Mode, but can get into the Download Mode. But I am not even able to get into the Download mode now.
It just won't freaking turn on.
If I send it over for repair, as the phone is a rooted one, will I void the warranty ?
Please reply quickly. I am starting to freak out.
OK... I want to be the first to eat my words here!!!!!
I tried one last time...just now
I took everything out and only held the volume keys. I plugged in the USB cable to the PC and then to the phone & put the battery in and BAM!!!!! it came on in Download mode
This way has NEVER worked for me without holding the power button. This phone was in all senses of the word "DEAD". I figured I would give it a try with just the volume keys.
jmcghee1973 said:
OK... I want to be the first to eat my words here!!!!!
I tried one last time...just now
I took everything out and only held the volume keys. I plugged in the USB cable to the PC and then to the phone & put the battery in and BAM!!!!! it came on in Download mode
This way has NEVER worked for me without holding the power button. This phone was in all senses of the word "DEAD". I figured I would give it a try with just the volume keys.
Click to expand...
Click to collapse
lol you must be very happy after that, good to great that.
Sent from my SGH-T959 using XDA App
jmcghee1973 said:
OK... I want to be the first to eat my words here!!!!!
I tried one last time...just now
I took everything out and only held the volume keys. I plugged in the USB cable to the PC and then to the phone & put the battery in and BAM!!!!! it came on in Download mode
This way has NEVER worked for me without holding the power button. This phone was in all senses of the word "DEAD". I figured I would give it a try with just the volume keys.
Click to expand...
Click to collapse
I got the same issue and this isn't working for me.
are there any other ideas?
it is completely dead. I am using a new battery and a known good usb cable to the computer.
I have tried holding all three buttons...just the vol up and down...vol up and power...etc... and nothing.
I even created that little JTAG thingy that I found on YouTube...that did nothing also
Different Situation
I have a similar problem with my Vibrant.
I reset my battery stats and also disabled VooDoo lagfix, and after i tried to reboot the phone, it froze on the vibrant screen.
I tried using soome of the methods that you guys posted before me, but then after i turn it on it shows an icon that there is a connection problem between the phone and PC.
I CAN turn on the phone, is there a way to just like reset everything? and if so how?
Thanks!
IClassStriker said:
I have a similar problem with my Vibrant.
I reset my battery stats and also disabled VooDoo lagfix, and after i tried to reboot the phone, it froze on the vibrant screen.
I tried using soome of the methods that you guys posted before me, but then after i turn it on it shows an icon that there is a connection problem between the phone and PC.
I CAN turn on the phone, is there a way to just like reset everything? and if so how?
Thanks!
Click to expand...
Click to collapse
If your phone powers on at all, you should be able to get into DL mode. Follow the instructions on how to revert to stock via ODIN.
In reply to the OP, if you tried the download mode method:
connect phone to usb
pull out battery
hold both volume sticks
put in batttery
and the phone still does not turn on even after multiple tries , well you're a bit screwed. But, Samsung cannot detect if the phone has been rooted if it cannot even turn on. Just tell them the Kies Mini update bricked the phone.
omg leave ur phone on charger for 10 min, pull battery out when hooked up to charger put battery back in , let sit for few min pull battery out hook up phone to computer hold vol up vol down pop battery in , helped ? np this has been answered gazilion times in other threads
btw it takes few try this way to get it back up running so dont stop on first , hey .
If you have the phone!pc problem..connect to odin & see if your showing a COM port .... just flash pit & tar if you do. Without download mode
Sent from Bionix V powered Vibrant
my phone shut off and now it won't turn on. I don't get a battery charge screen or anything. The phone's just blank.....
If you have the phone!pc problem..connect to odin & see if your showing a COM port .... just flash pit & tar if you do. Without download mode
yes u do that it makes sense lol
gmoney007 said:
I got the same issue and this isn't working for me.
are there any other ideas?
it is completely dead. I am using a new battery and a known good usb cable to the computer.
I have tried holding all three buttons...just the vol up and down...vol up and power...etc... and nothing.
I even created that little JTAG thingy that I found on YouTube...that did nothing also
Click to expand...
Click to collapse
You're talking about a DIY Jig. A JTAG is completely different. They cost $150-300. You can pay to have a local repair shop jtag it for around $50 or send it to Samsung to repair/replace. I'm still trying to find out how much Samsung would charge for the repair if it's deemed out of warranty.
If your phone refuses to turn on no matter what you do and it gets warm or hot if you leave the battery in it, read on:
I hope my suggestion is not too late. I was in the situation before. I tried everything everyone said here and somewhere else. None of them works.
The reason that those methods don't work because you cannot get to download or recovery mode or even the pc-phone screen since your phone won't turn on. The reason that your phone doesn't turn on because the bootloader has been messed up. A jig will work only if your phone can be turned on somehow.
Three possible solutions:
1. Repair or replace it with T-mobile, or
2. Get someone to repair it with a riff box or other similar tool, or
3. Get the box and fix it yourself (not recommended if you are not familiar with electronic stuff.)
This is the link for the same problem you have; this guy bought the box and has his phone fixed himself. If you live in US, he may do it for you if you have no place to go. It does hurt to ask.
http://forum.xda-developers.com/showthread.php?t=974862&page=6
Hi everyone
My SGS 2 won't start anymore
I charged my phone, then went somewhere, used the phone, put it back in my pocket and the next time i looked at it it was shut down and i couldn't turn it on anymore, nothing happens at all.
theres no problem with the battery (it works on another SGS 2)
I rooted my phone and put lightning rom 1.2 on it. i had no problem rooting the phone and its the first rom since stockrom.
What should I do?
So you mean your phone won't boot anymore? There is no Samsung logo or anything?
Sent from my GT-I9100 using XDA App
no logo, no vibration, just black
tried normal startup as well as "vol down, home, power"
Recovery vol up + home + pwr release at splash screen .
You can either try the usb recovery jig though this poster says it does not work but in my view worth a try.
http://forum.xda-developers.com/showthread.php?t=1206967
Or take your chance and return the phone under warranty .
jje
Did you try removing battery, replacing and then turning on. I had the same issue yesterday and this worked for me.
Sent from my GT-I9100 using XDA Premium App
Samsung GS2 - System Crashed black screen
+1 Here. I got the same thing
I’m really newbie, first time play on Android phone and got crash
However, below are what I did in chronological order
1) I did and success
http://www.inspiredgeek.com/2011/04...ng-odin-and-superoneclick-step-by-step-guide/
2) Did & Success
http://forum.xda-developers.com/showthread.php?t=1154252
3) Did & fail
http://forum.xda-developers.com/showthread.php?t=892297
4) Outcome
It restarted, and keep restarting at Samsung start-up flash screen repeatly, can not load into mobile home screen.
I bought to Malaysia Samsung Service Center. They mention can try to flash my phone but not guaranteed. Worst still, Result:- black out, can’t start the phone even pressing power button.
Thanks, appreciate that
ps: I bought from Bangkok, is Malaysia version different? Btw, I did try to do the hard reset but same. (Vol Up + Home + Power button, then Wipe Data/ Factory Reset)
I screen capture baseband version is DXKF1, Build number is Gingerbread.DXKF4
Thanks alot man. Truly appreciate if any alternative solution or suggestion?
Having the exact same problem,
Charged phone
Listened to some music for 30 minutes
put the phone away on the table
Two hours later I noticed the phone had shut down.
Trying to boot it nothing.
Nothing when put in wall socket charger.
Nothing when connected to USB.
Vol Up + Home + Power button does nothing.
running Lightning rom 1.2 or 1.3
Phone is 2.5months old.
You may have your last try - USB jig
Same problem here, shut down the phone to put a new microsd and when i try to start it only a black screen, no samsung logo, no vibrate, no nothing....
I try to remove sim and microsd and no result, changed battery, no result, battery works in another SGS2....
Any solution?
EDIT: WORKS AGIAN!!!! i leave it alone without battery around 30 mins then put battery and working again...
my phone won't turn on. I set it down around 26% battery and went to check it about 30 min later. BLACK. plugged it in. battery break still nothing... no vibrate no lights nothing!
im leaving battery out for the night and will try it back in in the morning but im doubtful! my life sucks.
tylerlaczko said:
my phone won't turn on. I set it down around 26% battery and went to check it about 30 min later. BLACK. plugged it in. battery break still nothing... no vibrate no lights nothing!
im leaving battery out for the night and will try it back in in the morning but im doubtful! my life sucks.
Click to expand...
Click to collapse
Tried many things and not working. Sending it in for warranty. At least they wont know its hacked until they fix it. Maybe they wont charge me...
tylerlaczko said:
Tried many things and not working. Sending it in for warranty. At least they wont know its hacked until they fix it. Maybe they wont charge me...
Click to expand...
Click to collapse
So what happened? Did they work out that it was hacked and were you charged?
Hello,
Don't know if this has been asked but I have been looking for it for a while. Cant seem to fine a solution.
I flashed my phone wrong with hemdall now my phone wont turn on. Screen completely black i reboot pulled out the battery everything I can think of can you give me a suggestion. I was thinking about buying a USB Jig.
I'm in the same boat and I bought the Jig. However I think Josh just acts as a middle man on this one and shipping is actually from overseas. But you can find it here. http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-s-download-mode-jig/ I suggest a little extra shipping cost.
However the other suggestion if that is not working (I think I killed my phone) is to have Josh do a Jtag on the phone. You can find that at http://mobiletechvideos.mybigcommerce.com/samsung-vibrant-jtag-brick-repair/
Can you get into download mode? Remove battery, plug usb, press up+down vol buttons and insert battery.
hey i having same problem but i could see the vibrant samsung screen but my phone won't pass that and like you say about the usb cable and then plugging the battery i can do that as well but how can i get my phone back and running another rom!!!
Monster809 said:
hey i having same problem but i could see the vibrant samsung screen but my phone won't pass that and like you say about the usb cable and then plugging the battery i can do that as well but how can i get my phone back and running another rom!!!
Click to expand...
Click to collapse
If you can see the Vibrant Samsung screen just use Odin to flash back to stock
Kabiigon said:
Hello,
Don't know if this has been asked but I have been looking for it for a while. Cant seem to fine a solution.
I flashed my phone wrong with heimdall now my phone wont turn on. Screen completely black i reboot pulled out the battery everything I can think of can you give me a suggestion. I was thinking about buying a USB Jig.
Click to expand...
Click to collapse
The real solution here i doing a JTAG to your phone or make the Unbrickable MOD (It's very dangerous, a person with Welding and electronic skills must do this).
Another thing you can do is buy a broken Screen phone from Ebay (it more cheaply) and change the motherboard!!
My suggestion would be to continue to try to get into Download mode on the phone. My phone was DEAD no life at all plugged into the wall or PC. I kept trying to get it into download mode and magically after hours of failures, ODIN recognized the device! The phone was still DEAD no life at all on the screen but ODIN had recognized that my device WAS indeed connected. So I continued to flash back to stock and as always with a little patience ODIN was there to save me. The phone automatically rebooted after ODIN was done and BOOM! Good2Go
Goodluck!
^^I'm gonna try that and hopefully with some patience it will work. Otherwise I'm also gonna be ordering a jig, they're not that expensive. My problem is the same as the OP's. My vibrant will just not give any signs of life. I was trying to odin to stock from one cosmics ics RC3.1. Wanted to start on a fresh install for AOKP build 25. But then odin decided to fail on modem.bin. then it just hung and phone turned off, haven't been able to turn it on since. I've spent the last two hours trying to put in different combinations and keys and usb attachments to bring any hints of life, but so far nothing. Bootloader update was not checked on odin so I'm pretty confident that its not due to bootloader mismatch but someone correct me if I'm wrong. Sending it back to samsung or tmobile is very far of an option since I've modified the phone to add FFC. If anyone has any advice or hints it would be greatly appreciated. I'm kind of hating myself and flashing now since I was very happy with the rom that I had and how everything was setup. I just wanted to try something new for fun and this went and blew everything up.
^^I literally held down the buttons > plugged in the cord > put in the battery > and counted in my head the amount of seconds it took the phone to "normally" boot to where I would "normally" let go of the power button to get into Download mode, lol I know it sounds ridiculous but that's how I did it. It helped that I had my sisters working Vibrant right there, I used her phone to get into download mode and timed the process and used that as a baseline for the timing of trying to get the "DEAD" Vibrant into download mode.
If all else fails a JTAG as mentioned should fix your problem fosho!
Goodluck!
Ye I fixed it. One day I did what I had been doing the whole time and it just decided to work. Got into download mode then went back to stock. Our phone is so freaking weird yet I love the damn thing. It really is unbrickable. To anyone in this situation just never give up.
Sent from my SGH-T959 using XDA App
Today while getting lunch my GS4 shut off and wouldn't turn back on. I am running Hyperdrive RLS18.1, and it has been working fine up until today. I have tried everything to get it to boot past the samsung custom logo. The steps I take to get it to the logo are- 1) Take out the battery 2) Put battery back in 3) Screen boots up with samsung logo(if it is plugged into the charger it shows the charging battery then goes to black) 4)the screen turns off. I have tried putting it into download mode by holding the home-power button-volume button combo, but it won't boot into download mode. I tried plugging it into the computer and it doesnt recognize it because it is off. I have two different batteries that I tried to put in the back, but they both do the same thing. Does anyone have any suggestions on how to go about fixing this? And if I go into the verizon store and my phone gives the samsung logo with custom underneath it will they uphold the warranty? I doubt since rooting voids it....Thanks for any help in advance!
After trying some more options to fix the phone, I was able to get it into download mode, but then the screen turned off again. I realize that the problem is the screen won't stay on for more than a second or two. No matter what comes up, the screen turns off. But when plugged into the computer, it also just shuts down.
can you get into safestrap?
bamige1 said:
can you get into safestrap?
Click to expand...
Click to collapse
I actually had this phone before the bootloader was locked, I think. I never had to use it to root.
I have no idea why this worked, but after letting my phone sit all night, I tried this video -https://www.youtube.com/watch?annotation_id=annotation_1286109531&feature=iv&src_vid=SSLZFmhmBlc&v=uc0afHKahR4 . I have no idea why it worked, but it did. So if anyone comes upon this thread and has this problem, feel free to contact me and I will try to help you fix the problem.