Related
Sorry if this is a dumb Question but I have not been able to find a true answer.
What is the advantage of updating My Radio Rom from 1.20 to either 1.27 or 1.35 or should I leave well enough alone.
Its up to you, the 1.35.00.11 version of the radio has the GPS chip enabled, but as you will see in the GPS thread the GPS chip works but has no antenna. The radio should be more stable, and i noticed an increase in the range of my 3G area with it. Make sure to use the version available here (at the top) because they push "des SSPL" to the phone so you dont need to worry about which bootloader or CID you have (not that it matters about CID with radio upgrades...but you know what i mean )
Thanks, i'll probably upgrade to 1.35 using the link you provided
Just upgraded, very straightforward.
One slight issue. After upgrade and soft reset I could not make a data connection.
I made a voice call just to check that was working . . .
then all was OK.
Don't know if the voice call sorted it or what
just make sure you have GPS off or your battery will be in for a ride
kassper said:
just make sure you have GPS off or your battery will be in for a ride
Click to expand...
Click to collapse
Hi,
I also flashed 1.35 nice and easy. So where can you turn GPS off ?
Thanks for the help
char05
Don't worry, GPS isn't enabled unless you install the VRSerial driver (which aint easy....). Even then, it's only turned on when an application specifically opens the GPS comm port.
Sleuth255 said:
Don't worry, GPS isn't enabled unless you install the VRSerial driver (which aint easy....). Even then, it's only turned on when an application specifically opens the GPS comm port.
Click to expand...
Click to collapse
Hi Sleuth255,
thanks for the help on this issue. I do not indent to install VRSerial. I do have an external GPS mouse which is fine for me.
Greets
char05
I recently upgraded and it was a major improvement for me. Far fewer dropped calls, better reception, etc.
I have noticed a noticeable decrease in in-call volume...is this an issue with this rom? At max volume, I have trouble hearing in a noisey environment...never had this problem before.
RUU_1.35.00.11_radio_only.exe wants to connect to the internet?
I upgraded my radio rom yesterday and kept the installation file, RUU_1.35.00.11_radio_only.exe, on my laptop. I downloaded the file with the link supplied in the wiki page.
Now today I get a warning from my f-secure saying that the exe file “RUU_1.35.00.11_radio_only.exe” wants to connect to the internet. I clicked deny and it kept trying to connect four more times then it stopped. I scanned the file for viruses and Trojans but F-Secure didn’t find any.
Anyone else had the same problem or perhaps knows whats going on?
ricott said:
I upgraded my radio rom yesterday and kept the installation file, RUU_1.35.00.11_radio_only.exe, on my laptop. I downloaded the file with the link supplied in the wiki page.
Now today I get a warning from my f-secure saying that the exe file “RUU_1.35.00.11_radio_only.exe” wants to connect to the internet. I clicked deny and it kept trying to connect four more times then it stopped. I scanned the file for viruses and Trojans but F-Secure didn’t find any.
Anyone else had the same problem or perhaps knows whats going on?
Click to expand...
Click to collapse
its probably thinking that access to the ActiveSync device (which as far as i am aware is via tcp over usb) i wouldnt worry about it. disconnect from the internet if you are.
Hi,
HOUSTON WE HAVE A PROBLEM!!!
After install this radio version, my phone want to start...
WiFi is ok
BT is ok
But the phone remain in of, even i restart it using the wireless manager...
Some suggestion?
Tanks
load up dotFred's taskmanager and see if the RIL service has started.
@ricott:
I built that RUU with an unregistered copy of WinRAR. Maybe it's phoning home for some reason....
vulkanxxv said:
Hi,
HOUSTON WE HAVE A PROBLEM!!!
After install this radio version, my phone want to start...
WiFi is ok
BT is ok
But the phone remain in of, even i restart it using the wireless manager...
Some suggestion?
Tanks
Click to expand...
Click to collapse
Issue resolved!
If the phone won't start, after flashing radio 1.35, simply reflash the SO.
mrvanx said:
Its up to you, the 1.35.00.11 version of the radio has the GPS chip enabled, but as you will see in the GPS thread the GPS chip works but has no antenna. The radio should be more stable, and i noticed an increase in the range of my 3G area with it. Make sure to use the version available here (at the top) because they push "des SSPL" to the phone so you dont need to worry about which bootloader or CID you have (not that it matters about CID with radio upgrades...but you know what i mean )
Click to expand...
Click to collapse
Did you upgrade from 1.34.00.10 or a lower version radio ?
Would like to know if there is any "real" advantage to upgrade from 1.34.00.10 to 1.35.00.11 ?
I am experiencing some missed calls due to the always GPRS / 3G connection I am running for emoze push mail.
OK i have decided to run with the Irus Ultra Vanilla 6.1 rom. everything seems to be working great as I am installing my programs...then I notice after setting up my exchange email account...the microsoft direct push doesent seem to be working..i try to sync my exchange account and it says it cant connect with the current connection settings. and if I try using the comm manager i cant activate the direct push...any advice on this? Now after flashing the rom I never got the Tmobile settings detection thing that I've always had before...could it be something not set for tmobile? Thanks in advance..I really need access to my work email
touchlasvegas said:
OK i have decided to run with the Irus Ultra Vanilla 6.1 rom. everything seems to be working great as I am installing my programs...then I notice after setting up my exchange email account...the microsoft direct push doesent seem to be working..i try to sync my exchange account and it says it cant connect with the current connection settings. and if I try using the comm manager i cant activate the direct push...any advice on this? Now after flashing the rom I never got the Tmobile settings detection thing that I've always had before...could it be something not set for tmobile? Thanks in advance..I really need access to my work email
Click to expand...
Click to collapse
Just set up the t-mobile connections manually and you should be fine.
ok, forgive me for being spoiled with autoconfiguration....I think I found the settings on tmobiles web page...but i cant seem to find where to put them. I think ive looked under all the connection settings and havent found anything...i vaugly remember seeing like a manual configuration wizard that i ran back on another rom...but I doubt thats included in the ultra vanilla.
touchlasvegas said:
ok, forgive me for being spoiled with autoconfiguration....I think I found the settings on tmobiles web page...but i cant seem to find where to put them. I think ive looked under all the connection settings and havent found anything...i vaugly remember seeing like a manual configuration wizard that i ran back on another rom...but I doubt thats included in the ultra vanilla.
Click to expand...
Click to collapse
You go to Start>Setting>Connection, then you will see an icon called "Connections". The iconn has c omputer, two mobile phones and a globe. Click on that, and click on "Add a new modem connection" . Enter the name of your Tmobile company, and in the select a modem window, choose "Cellular GPRS". On the next screen, enter the Access Point Name. If you don't know what is the access point name, call your phone company and ask them.
Thats' it. Very simple.
ok, i setup a tmobile mms connection and all I did was input wap.voicestream.com into the APN and then clicked finish. Now my direct push email is working and the net is working as well. Does anyone know if that should be all I need setup to access my full tmobile data plan that I have?
ok, everything seems to be working now except my receiving of picture messages....I had a friend send me a pic and i got the text from the picture message as a normal sms, not mms. once I tried to open the sms, it gave me an error that It couldnt download the msg and it would be left in the inbox....gotta be another setting somewhere....
touchlasvegas said:
ok, everything seems to be working now except my receiving of picture messages....I had a friend send me a pic and i got the text from the picture message as a normal sms, not mms. once I tried to open the sms, it gave me an error that It couldnt download the msg and it would be left in the inbox....gotta be another setting somewhere....
Click to expand...
Click to collapse
I think you have to set up the servers in Menu/MMS Options in the mms inbox screen
I hope touchlasvegas dont mind if I ask a "few" questions.
1. I'm interested in flashing this ROM, can I go back to AP4 if I choose to? There wont be a problem with the repartitioning when its already done right?
2. In the addons, did Irus put the Windows Live and MSN messenger v10.6..... or is it a previous version?
3. Also in addons, which Windows Mobile is in there....is it the same one in AP4? I'm also looking for the Comm Manager and USB to PC from Ap4?
If I can get just these few things.....I'm ready to install this more stable ROM!!!
Thanks
depends on what SPL your using...I'm on SPL 1.2 so i can bounce around on various roms as long as they are the same SPL. I believe Irus has an spl 1.2 AP4 rom, but do you know which spl you are running? I do not remember seeing the windows live and messenger apps in the addons but i may have overlooked them...easy enough to download the latest versions though. Pretty much each little piece of software you need...you'll need to get the latest version and download it. I'm lovin the speed of the ultra vanilla though, all menus are snappy instead of the slug I had been used to.
and to anyone else concerned, I tracked down the connection wizard cab in another thread, ran that and it setup all my tmobile settings perfectly...so its all good now. I have one last issue, not being able to change the softkeys...I would prefer it to say just email...or mail, instead of Gmail at the bottom right. By chance anyone know of a cab file that would remove the bottom bar totally?
I'm running Ap4.0 3.5spl. I just dont know if any of the things that I'm looking for is available in his addons.
So the answer to the first question is....."yes" I can re-flash the PK Ap4.0 ROm if I want to go back to it?
I believe you can, I wish someone else with spl 3.5 could chime in..I do not have that spl yet, so I dont have any experience with it. It would make sense that you could change between any 3.5 spl roms though
Thanks for the help touchlasvegas.
A couple questions for you. What SIP's are apart of this ROM? Is teksoft fingertouch in there?
Would you recommend IYHO to flash to this ROM? I'm reading nothing but good stuff about it!
touchlasvegas said:
I believe you can, I wish someone else with spl 3.5 could chime in..I do not have that spl yet, so I dont have any experience with it. It would make sense that you could change between any 3.5 spl roms though
Click to expand...
Click to collapse
Yes, that's the way it works.
You can change between any SPL 3.5 rom!
CRU2008 said:
Thanks for the help touchlasvegas.
A couple questions for you. What SIP's are apart of this ROM? Is teksoft fingertouch in there?
Would you recommend IYHO to flash to this ROM? I'm reading nothing but good stuff about it!
Click to expand...
Click to collapse
Hi CRU2008,
I hope you don't mind that i'm answering some of your questions.
Fingertouch is not included because Irus has no permission by Teksoftco to provide it.
This rom is great, very fast and stable. I had some annoying issues with the bluetooth stack and my Cardo BT headset. Every time a call came in, after a few seconds the bluetooth connection was lost.
So i had to go back to AP4 (i disabled all that fingertouch and automatic orientation stuff), because i have to use my Ameo in a professional manner.
MDA_Junkie said:
Hi CRU2008,
I hope you don't mind that i'm answering some of your questions.
Fingertouch is not included because Irus has no permission by Teksoftco to provide it.
This rom is great, very fast and stable. I had some annoying issues with the bluetooth stack and my Cardo BT headset. Every time a call came in, after a few seconds the bluetooth connection was lost.
So i had to go back to AP4 (i disabled all that fingertouch and automatic orientation stuff), because i have to use my Ameo in a professional manner.
Click to expand...
Click to collapse
Hi
I had the same Bluetooth problem then i have to switch rom. I have switched to Irus TaxistV10 it works great and faster than Ap4. It is upto you which rom you choose, but i recommend the V10 rom. Reasons for that
Bluetooth stack is great
Wireless manager works on 96DPI
faster
Good luck
touchlasvegas said:
and to anyone else concerned, I tracked down the connection wizard cab in another thread, ran that and it setup all my tmobile settings perfectly...so its all good now. I have one last issue, not being able to change the softkeys...I would prefer it to say just email...or mail, instead of Gmail at the bottom right. By chance anyone know of a cab file that would remove the bottom bar totally?
Click to expand...
Click to collapse
Hi touchlasvegas,
would you mind to give the direct link here to this connection wizzard cab?
I've tried 2 or 3 three connection wizzard cabs and all refuses to start under this rom.
sabes143 said:
Hi
I had the same Bluetooth problem then i have to switch rom. I have switched to Irus TaxistV10 it works great and faster Ap4. It is upto you which rom you choose, but i recommend the V10 rom. Reasons for that
Bluetooth stack is great
Wireless manager works on 96DPI
faster
Good luck
Click to expand...
Click to collapse
Hi Sabes 143,
thank you for your advice!
I think i will give this TaxistV10 rom a try.
MDA_Junkie said:
Hi touchlasvegas,
would you mind to give the direct link here to this connection wizzard cab?
I've tried 2 or 3 three connection wizzard cabs and all refuses to start under this rom.
Click to expand...
Click to collapse
if your still lookin for the connection wizard, follow http://forum.xda-developers.com/showthread.php?t=356330 to this thread and in POST # 3, there is a list of addons. Your going to download "Shamanix HTC ConnectionSetup v1.0.31247.2.cab" after struggling to enter manual settings, this got internet, data, and MMS all working perfectly for tmobile automatically.
I'm also very lucky, as I just dont have a need to depend on a bluetooth with my advantage...if I cant talk on the speaker due to privacy at the moment, then I just send a text, not a big deal to me. I have yet to run into any problems with the Irus Ultra Vanilla rom, it just takes time to get everything working because almost everythings been removed from the rom to make it ultra vanilla, and thats what I wanted...emilination of the junk so I can pick and choose what I want.
i downloaded and ran the olipro 2.40, then ran the titan radio 3.42.30 program. i cannot get past the alltel screen now. the reason i ran the radio rom first was because after reading the upgrade path it was suggest to run the radio program first. the only number on the htc screen that changed was the 3.42.30, the number below reads 2.14.
i did this with the usb cradle. is there a way to go back? fix?
also i wasnt able to get back to the tri color screen, it went straight to the htc/alltel screen so i wasnt able to do the dcd rom update i downloaded.
kelvinb said:
i downloaded and ran the olipro 2.40, then ran the titan radio 3.42.30 program. i cannot get past the alltel screen now. the reason i ran the radio rom first was because after reading the upgrade path it was suggest to run the radio program first. the only number on the htc screen that changed was the 3.42.30, the number below reads 2.14.
i did this with the usb cradle. is there a way to go back? fix?
Click to expand...
Click to collapse
Run exitbootloader after disabling USB connections in activesync options.
You didn't brick your phone.
isnt it now a known thing that if you are using the .exe to upgrade your radio that you need version 1.2 of bootloader?
kelvinb said:
also i wasnt able to get back to the tri color screen, it went straight to the htc/alltel screen so i wasnt able to do the dcd rom update i downloaded.
Click to expand...
Click to collapse
Instead of powering on normally, hold power, camera, and hold in the soft-reboot for about 2 seconds, then let go. it should put you in the tri-color bootloader screen.
Then you can flash a ROM.
kflipproductions said:
isnt it now a known thing that if you are using the .exe to upgrade your radio that you need version 1.2 of bootloader?
Click to expand...
Click to collapse
And no, you can upgrade radio on 2.40 but after flashing a radio, you can't do another radio via the RUU for some reason. You have to update using MicroSD or a packaged RUU from then on...
kflipproductions said:
isnt it now a known thing that if you are using the .exe to upgrade your radio that you need version 1.2 of bootloader?
Click to expand...
Click to collapse
Good catch, that is his problem. I forget that some people are still using executable over SD for radio upgrades.
i am at the tri color screen now. i will do the dcd upgrade now and hopefully i should be good. i tried this before and was at the same screen (alltel screen) and thought it was done so i got a new one. thanks for the assistance!
wow amazing. it works thank you everyone very much. i did the *228 and activated my phone and it works fine now. now i need to read through and see how i can get picture/video messaging to work (no choice to send)
kelvinb said:
wow amazing. it works thank you everyone very much. i did the *228 and activated my phone and it works fine now. now i need to read through and see how i can get picture/video messaging to work (no choice to send)
Click to expand...
Click to collapse
i think you gotta install something like Arcsoft MMS for MMS messaging
I've never been able to get mms working with any consitency on Alltel with dcd's roms. I've installed the "Lenny" Alltel Arcsoft cab and it'll work occasionally when I run tests, but then won't work 10 minutes later or I won't receive an mms from someone. I've never been able to come up with a valid, consistent fix, so unfortunately I've stuck with the stock roms lately as mms is more important to me than WM 6.1.
I'm currently trying to add Alltel support to my MMS project, though I'll need some beta testers. It's not ready yet, but if you want to pm me with your email address, I can shoot out a mass email letting everyone who wants to test know when it's good to go.
I am having similar issue but mine is stuck on the
vzw page..anything work for this ?
petey310 said:
I am having similar issue but mine is stuck on the
vzw page..anything work for this ?
Click to expand...
Click to collapse
Tell us what you have done. Did you flash anything?
phone is working great now, but mms is not working. here are my settings
server name alltel mmsc
gateway mms.alltel.net
port number 8080
server address http://mms.alltel.net/servlets/mms
connect via the internet
arcsoft mms composer 5.0.31.16
wm6.1
dcd 3.2.2
i have tried switching .net to .com and still same error *unable to send your message*
i can recieve pictures but they will not download.
also i got a regedit program and my waptype is 1 not 0. any ideas?
OK all, I have just read inescpbl's post regarding his unfortunate upgrades, and I'm happy to say I didn't bung things up the same way, but more want to get your thoughts on my P4000's current state, and if there are any further updates that could smooth things over.
Basically, I did the following:
Upgraded bootloader to 2.40
Installed Radio 3.39
Installed No2chem's latest
Nothing worked.
Installed DCD 3.2.3
Installed Radio 3.42.50
Installed Telus CAB to allow for internet
Was able to surf internet and use google maps
Updated programming and PRL with *22803
Now, I can make calls but internet is like a yo-yo, with 90% of the time not working. When it does, Google Maps is unable to receive GPS satellites.
My question is, after all of this, the setup feels buggy. Is there something I have missed or should do?
Thanks in advance to anyone with their 2 cents to spare...
I've never had to update prl. Im with telus too. only thing i've done other than flash new roms is do the GC14 gps fix. Never had a problem with the P4000 being 'buggy' as you say it.
Is anyone using a non-ATT rom with Blackberry Connect? I cannot seem to get it to work with any of the non-ATT rom's...I know with my tilt I had to change the AKU to .0.4.2 and then it would work but I have had not luck with the ROmeos rom, while NATF and other ATT Rom's seem to work without tampering just load it and it goes....I want to be able to have a little more variety to pick from so advise would be welcome...
Yep. U need version .103
Works on all with AKU # .1.4.0
Thank you!!! I already made a cab to automatically change the AKU so that I can run it during UC and auto install both the AKU and BBConnect like I did with my tilt....now I am flashing the PROven Rom...hopefully all works well. Thanks again...I love this forum....
I'm using the BB connect .103 with AKU .1.2.8 and it's a custom ROM. I have downloaded the newest .104 cab and will try that when I upgrade to the next ROM.
In case anyone wants it...this cab will automatically change the aku...if you throw it in with your UC you can put Blackberry Connect last and it will auto install without issues...
So, I JUST got BBConnect working on my Fuze running NATF's ROM. So far so good.
I've also noticed ALOT of battery consumption off this BBConnection-- even with the BB connections suspended... thats odd...
Are there any BBConnect Specific ROMs available that utilize BBC a bit, meaning, isolate the BB side of the device from the fun side?
Correct me if I'm wrong, but I keep my Blackberry Connection to my company offline manually through the Settings tab. I turn this on, sync my email, and kill the connection accordingly. Instead of going through all this, I thought maybe this was incorporated in some add-in in either some ROM or some Inbox so it would be more accessable.
Thoughts? Tweaks? Etc?