[Q]Blackberry Connect...ATT Rom's only? - Touch Pro, Fuze ROM Development

Is anyone using a non-ATT rom with Blackberry Connect? I cannot seem to get it to work with any of the non-ATT rom's...I know with my tilt I had to change the AKU to .0.4.2 and then it would work but I have had not luck with the ROmeos rom, while NATF and other ATT Rom's seem to work without tampering just load it and it goes....I want to be able to have a little more variety to pick from so advise would be welcome...

Yep. U need version .103
Works on all with AKU # .1.4.0

Thank you!!! I already made a cab to automatically change the AKU so that I can run it during UC and auto install both the AKU and BBConnect like I did with my tilt....now I am flashing the PROven Rom...hopefully all works well. Thanks again...I love this forum....

I'm using the BB connect .103 with AKU .1.2.8 and it's a custom ROM. I have downloaded the newest .104 cab and will try that when I upgrade to the next ROM.

In case anyone wants it...this cab will automatically change the aku...if you throw it in with your UC you can put Blackberry Connect last and it will auto install without issues...

So, I JUST got BBConnect working on my Fuze running NATF's ROM. So far so good.
I've also noticed ALOT of battery consumption off this BBConnection-- even with the BB connections suspended... thats odd...
Are there any BBConnect Specific ROMs available that utilize BBC a bit, meaning, isolate the BB side of the device from the fun side?
Correct me if I'm wrong, but I keep my Blackberry Connection to my company offline manually through the Settings tab. I turn this on, sync my email, and kill the connection accordingly. Instead of going through all this, I thought maybe this was incorporated in some add-in in either some ROM or some Inbox so it would be more accessable.
Thoughts? Tweaks? Etc?

Related

HELP!!!!

I would like to start off by saying, you guys rock! Especially the ROM kitchen! I just installed the newest wm2003 t-mobile rom. I like it a lot, but I have USB connection problems. I can install programs, but the connection dies if I try to change the rom. Its all good though, since I am satisfied with the rom that I am using
The problem that I have though, is I am located in Los Angeles. I am using T-Mobile. My GPRS works. My Internet explorer works. But I cant get AIM 2.0, or MSN Messanger to work. The downloaded ROM had IMOV on there, but that doesnt work either.
Anybody else have this problem? Any suggestions? It may sound funny, but AIM is something I use to communicate with my employees. I need this working asap.

IR with DCD 3.0.1 and latest Sprint Rom

I have seen several post stating IR not working, IR working with this fix, etc..
I need to know if IR works with any of the latest roms.
I am running DCD 3.0.1 after I installed Sprint Rom so I have latest radio. Im on Alltel if that matters but doubt it. I have a Application that renews security on Electronic keys for work that uses the ir port, connects to server via phones evdo and reauthorizes the keys for the next 24 hours.
So I need to get that program working somehow. I have never installed it before yesterday so I haven't had a chance to test on other roms. Thought I'd ask here for I beat my head against the wall trying different things.
What works?? Any Roms?
Thanks
Brad
from 3.35 stock OEMDrivers rgu:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Obex]
"IsEnabled"=dword:1 ; After coldboot, device setting both are correct, but enable/disable beam item can not work on AKU19181
You will need to change this reg key back to IsEnabled=1 in order for IR to work on my rom.
i had a hard time understanding that DCD. my IR stil isnt working and I have the it set to 1. My beam is set to accept all and my bluetooth is set as well. What else could we be doing wrong?
dcd1182 said:
from 3.35 stock OEMDrivers rgu:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Obex]
"IsEnabled"=dword:1 ; After coldboot, device setting both are correct, but enable/disable beam item can not work on AKU19181
You will need to change this reg key back to IsEnabled=1 in order for IR to work on my rom.
Click to expand...
Click to collapse
What does that mean in simple english dcd? Not sure what that AKU19181 is? thx
What he says is that you have to manually enable it in the registry with the parameters that he mention....... everything else is just specifying the version of the mobile operating system.
thats basically a comment from htc saying IR is screwed up in wm6.1, and their registry workaround for it, by leaving obex always enabled. i have not tested but supposedly you just have to manually set that reg key.
dcd1182 said:
thats basically a comment from htc saying IR is screwed up in wm6.1, and their registry workaround for it, by leaving obex always enabled. i have not tested but supposedly you just have to manually set that reg key.
Click to expand...
Click to collapse
To clarify something. I have used your ROM's before and all I had to do to enable OBEX was to enable it in the bluetooth settings and Also in the Commanager for those who have BEAM as a setting.
Usually the 6-10 Commanagers have this option.
I know because before OBEX wouldn't work until I enabled it in the Commanager.
You don't need to enable it in the registry only if you wan't to have it enabled 24/7 but if you only use it here and there just enable it from the Commanager, this saves up battery life.
You can test it also by enabling it in Commanager and going to the registry and you will see that it changes the Value from 0 to 1 once you refresh it.
so i did all this and my beam doesn't work yet!! help
[email protected]$ said:
To clarify something. I have used your ROM's before and all I had to do to enable OBEX was to enable it in the bluetooth settings and Also in the Commanager for those who have BEAM as a setting.
Usually the 6-10 Commanagers have this option.
I know because before OBEX wouldn't work until I enabled it in the Commanager.
You don't need to enable it in the registry only if you wan't to have it enabled 24/7 but if you only use it here and there just enable it from the Commanager, this saves up battery life.
You can test it also by enabling it in Commanager and going to the registry and you will see that it changes the Value from 0 to 1 once you refresh it.
Click to expand...
Click to collapse
Still having issues with this. the enabling in the prefs everywhere and in the registry just changes the checked value in the bluetooth settings. My bluetooth works perfect. no qualms there about anything. But my IR is still not doing a thing.
Thats a trip. What carrier ROM are you guys using? Maybe the issue is carrier based.
I have Verizon and havent had any issue so far with DCD's kitchens or ROMS.
How are you guys testing your OBEX / IR connections?
im on the alltel flash. currently on DCDs newest. bluetooth is an easy test of course, just sending files from my comp and using the PAN. as far as IR, i have a machine at my alltel retail store that uses ir to send files to phones, it will send to every phone except mine. my girlfriend has a 6700, stock, and it wont let me use the ir to send anything to hers or to recieve anything from hers
Mills00013 said:
im on the alltel flash. currently on DCDs newest. bluetooth is an easy test of course, just sending files from my comp and using the PAN. as far as IR, i have a machine at my alltel retail store that uses ir to send files to phones, it will send to every phone except mine. my girlfriend has a 6700, stock, and it wont let me use the ir to send anything to hers or to recieve anything from hers
Click to expand...
Click to collapse
do you have the allow incoming beams tab enabled? how about making your device visible?
I tested mine with my old moto Q and it works.... I wonder if there is a flaw in alltel's ROM.
thats what im beginning to wonder. both are enabled. and i have also changed the reg key too to "isenabled" but still no go. idk its weird. i can live without it though, i would just like to figure it out
Yeah I'm on the sprint version....my bluetooth also works fine but the IR just isn't workin'....I'm really about to give up!!!! i might just get threaded sms and go to sprint update, heard it's great with battery life anyways
[email protected]$ said:
do you have the allow incoming beams tab enabled? how about making your device visible?
I tested mine with my old moto Q and it works.... I wonder if there is a flaw in alltel's ROM.
Click to expand...
Click to collapse
I'm running DCD 3.0.1 - Sprint and IR is broken. I tried all of the suggestions but it refuses to see anyone to send to or receive from. I test it using my laptop which worked fine with the official ROMs.
Yeah I agree... I think i might just have to go to an official rom...plus better battery life, though I love dcd rom man!!!!
swinn said:
I'm running DCD 3.0.1 - Sprint and IR is broken. I tried all of the suggestions but it refuses to see anyone to send to or receive from. I test it using my laptop which worked fine with the official ROMs.
Click to expand...
Click to collapse
UPDATE
after reviewing my result. I didnt fully test it out completely. lol.
I tried sending something to my moto Q through IR and it finds it and sends but it cuts the tranmission. It doesn't send through all the way so i guess it doesn't work after all.
oh well, if this is the only price i have to pay to use 6.1, then so be it
confirmed here also ... IR doesn't work with DCD's ROM ... bummer, i really liked it ... look like it's back to the official ROM for me
For those on Sprint you guys might luck out in a couple of months when Sprint officially releases WM6.1 for the Mogul.
This release might fix all the issues that have been found (hopefully since they will release a newer build of WM6.1)
And even better, we can share the love among all the TITAN users.

Irus Ultra Vanilla rom questions...

OK i have decided to run with the Irus Ultra Vanilla 6.1 rom. everything seems to be working great as I am installing my programs...then I notice after setting up my exchange email account...the microsoft direct push doesent seem to be working..i try to sync my exchange account and it says it cant connect with the current connection settings. and if I try using the comm manager i cant activate the direct push...any advice on this? Now after flashing the rom I never got the Tmobile settings detection thing that I've always had before...could it be something not set for tmobile? Thanks in advance..I really need access to my work email
touchlasvegas said:
OK i have decided to run with the Irus Ultra Vanilla 6.1 rom. everything seems to be working great as I am installing my programs...then I notice after setting up my exchange email account...the microsoft direct push doesent seem to be working..i try to sync my exchange account and it says it cant connect with the current connection settings. and if I try using the comm manager i cant activate the direct push...any advice on this? Now after flashing the rom I never got the Tmobile settings detection thing that I've always had before...could it be something not set for tmobile? Thanks in advance..I really need access to my work email
Click to expand...
Click to collapse
Just set up the t-mobile connections manually and you should be fine.
ok, forgive me for being spoiled with autoconfiguration....I think I found the settings on tmobiles web page...but i cant seem to find where to put them. I think ive looked under all the connection settings and havent found anything...i vaugly remember seeing like a manual configuration wizard that i ran back on another rom...but I doubt thats included in the ultra vanilla.
touchlasvegas said:
ok, forgive me for being spoiled with autoconfiguration....I think I found the settings on tmobiles web page...but i cant seem to find where to put them. I think ive looked under all the connection settings and havent found anything...i vaugly remember seeing like a manual configuration wizard that i ran back on another rom...but I doubt thats included in the ultra vanilla.
Click to expand...
Click to collapse
You go to Start>Setting>Connection, then you will see an icon called "Connections". The iconn has c omputer, two mobile phones and a globe. Click on that, and click on "Add a new modem connection" . Enter the name of your Tmobile company, and in the select a modem window, choose "Cellular GPRS". On the next screen, enter the Access Point Name. If you don't know what is the access point name, call your phone company and ask them.
Thats' it. Very simple.
ok, i setup a tmobile mms connection and all I did was input wap.voicestream.com into the APN and then clicked finish. Now my direct push email is working and the net is working as well. Does anyone know if that should be all I need setup to access my full tmobile data plan that I have?
ok, everything seems to be working now except my receiving of picture messages....I had a friend send me a pic and i got the text from the picture message as a normal sms, not mms. once I tried to open the sms, it gave me an error that It couldnt download the msg and it would be left in the inbox....gotta be another setting somewhere....
touchlasvegas said:
ok, everything seems to be working now except my receiving of picture messages....I had a friend send me a pic and i got the text from the picture message as a normal sms, not mms. once I tried to open the sms, it gave me an error that It couldnt download the msg and it would be left in the inbox....gotta be another setting somewhere....
Click to expand...
Click to collapse
I think you have to set up the servers in Menu/MMS Options in the mms inbox screen
I hope touchlasvegas dont mind if I ask a "few" questions.
1. I'm interested in flashing this ROM, can I go back to AP4 if I choose to? There wont be a problem with the repartitioning when its already done right?
2. In the addons, did Irus put the Windows Live and MSN messenger v10.6..... or is it a previous version?
3. Also in addons, which Windows Mobile is in there....is it the same one in AP4? I'm also looking for the Comm Manager and USB to PC from Ap4?
If I can get just these few things.....I'm ready to install this more stable ROM!!!
Thanks
depends on what SPL your using...I'm on SPL 1.2 so i can bounce around on various roms as long as they are the same SPL. I believe Irus has an spl 1.2 AP4 rom, but do you know which spl you are running? I do not remember seeing the windows live and messenger apps in the addons but i may have overlooked them...easy enough to download the latest versions though. Pretty much each little piece of software you need...you'll need to get the latest version and download it. I'm lovin the speed of the ultra vanilla though, all menus are snappy instead of the slug I had been used to.
and to anyone else concerned, I tracked down the connection wizard cab in another thread, ran that and it setup all my tmobile settings perfectly...so its all good now. I have one last issue, not being able to change the softkeys...I would prefer it to say just email...or mail, instead of Gmail at the bottom right. By chance anyone know of a cab file that would remove the bottom bar totally?
I'm running Ap4.0 3.5spl. I just dont know if any of the things that I'm looking for is available in his addons.
So the answer to the first question is....."yes" I can re-flash the PK Ap4.0 ROm if I want to go back to it?
I believe you can, I wish someone else with spl 3.5 could chime in..I do not have that spl yet, so I dont have any experience with it. It would make sense that you could change between any 3.5 spl roms though
Thanks for the help touchlasvegas.
A couple questions for you. What SIP's are apart of this ROM? Is teksoft fingertouch in there?
Would you recommend IYHO to flash to this ROM? I'm reading nothing but good stuff about it!
touchlasvegas said:
I believe you can, I wish someone else with spl 3.5 could chime in..I do not have that spl yet, so I dont have any experience with it. It would make sense that you could change between any 3.5 spl roms though
Click to expand...
Click to collapse
Yes, that's the way it works.
You can change between any SPL 3.5 rom!
CRU2008 said:
Thanks for the help touchlasvegas.
A couple questions for you. What SIP's are apart of this ROM? Is teksoft fingertouch in there?
Would you recommend IYHO to flash to this ROM? I'm reading nothing but good stuff about it!
Click to expand...
Click to collapse
Hi CRU2008,
I hope you don't mind that i'm answering some of your questions.
Fingertouch is not included because Irus has no permission by Teksoftco to provide it.
This rom is great, very fast and stable. I had some annoying issues with the bluetooth stack and my Cardo BT headset. Every time a call came in, after a few seconds the bluetooth connection was lost.
So i had to go back to AP4 (i disabled all that fingertouch and automatic orientation stuff), because i have to use my Ameo in a professional manner.
MDA_Junkie said:
Hi CRU2008,
I hope you don't mind that i'm answering some of your questions.
Fingertouch is not included because Irus has no permission by Teksoftco to provide it.
This rom is great, very fast and stable. I had some annoying issues with the bluetooth stack and my Cardo BT headset. Every time a call came in, after a few seconds the bluetooth connection was lost.
So i had to go back to AP4 (i disabled all that fingertouch and automatic orientation stuff), because i have to use my Ameo in a professional manner.
Click to expand...
Click to collapse
Hi
I had the same Bluetooth problem then i have to switch rom. I have switched to Irus TaxistV10 it works great and faster than Ap4. It is upto you which rom you choose, but i recommend the V10 rom. Reasons for that
Bluetooth stack is great
Wireless manager works on 96DPI
faster
Good luck
touchlasvegas said:
and to anyone else concerned, I tracked down the connection wizard cab in another thread, ran that and it setup all my tmobile settings perfectly...so its all good now. I have one last issue, not being able to change the softkeys...I would prefer it to say just email...or mail, instead of Gmail at the bottom right. By chance anyone know of a cab file that would remove the bottom bar totally?
Click to expand...
Click to collapse
Hi touchlasvegas,
would you mind to give the direct link here to this connection wizzard cab?
I've tried 2 or 3 three connection wizzard cabs and all refuses to start under this rom.
sabes143 said:
Hi
I had the same Bluetooth problem then i have to switch rom. I have switched to Irus TaxistV10 it works great and faster Ap4. It is upto you which rom you choose, but i recommend the V10 rom. Reasons for that
Bluetooth stack is great
Wireless manager works on 96DPI
faster
Good luck
Click to expand...
Click to collapse
Hi Sabes 143,
thank you for your advice!
I think i will give this TaxistV10 rom a try.
MDA_Junkie said:
Hi touchlasvegas,
would you mind to give the direct link here to this connection wizzard cab?
I've tried 2 or 3 three connection wizzard cabs and all refuses to start under this rom.
Click to expand...
Click to collapse
if your still lookin for the connection wizard, follow http://forum.xda-developers.com/showthread.php?t=356330 to this thread and in POST # 3, there is a list of addons. Your going to download "Shamanix HTC ConnectionSetup v1.0.31247.2.cab" after struggling to enter manual settings, this got internet, data, and MMS all working perfectly for tmobile automatically.
I'm also very lucky, as I just dont have a need to depend on a bluetooth with my advantage...if I cant talk on the speaker due to privacy at the moment, then I just send a text, not a big deal to me. I have yet to run into any problems with the Irus Ultra Vanilla rom, it just takes time to get everything working because almost everythings been removed from the rom to make it ultra vanilla, and thats what I wanted...emilination of the junk so I can pick and choose what I want.

Anyone working on Build 21018 - last official build of 6.1?

The newest ROM for the Touch HD is AKU 1.6 Build 21018. Does anyone have any plans on creating a Titan kitchen or rom using this? It seems like it will be the last official update to 6.1...
Why work on 6.1 when you can have 6.5?
Still lots of issues for 6.5 on a Titan . . . may be too much for our older babies that are starved for RAM. I'd be interested in the latest/last build of 6.1, at least for a few more months until my 'free very 2' comes around. I'm salivating over all the new devices hitting MWC!
6.5 is still BETA and quite rough - I'd like to have the latest and greatest stable version of 6.1 and the new Iris browser for the best the Titan can be
+1, I'd like to see this too. Make my Titan last as long as it can, till those WM 7 devices start showing up....
Does anyone have a link the original 21108 ROM from which the trinity ROM was created? I need to find an official release somewhere (I am seeking an intact 21018 XIP, not a modified one with mencfilt.dll and cachefilt.dll removed).
Ok I've been searching xda and there's quite a few 21018 roms floating around. I don't know how much some of these are modified however...
http://forum.xda-developers.com/showthread.php?t=486222 -Diamond
http://forum.xda-developers.com/showthread.php?t=483822 - dutty's blackstone rom
http://forum.xda-developers.com/showthread.php?t=485396 - 21018 OEMs but I don't know which rom he used for the dump, might be able to ask.
http://forum.xda-developers.com/showthread.php?t=486216 - TP rom, same as diamond I think.
there's gotta be some more lurking around, but I was just browsing the heavy boards, that's why it's all GSM stuff
Cycomachead said:
Ok I've been searching xda and there's quite a few 21018 roms floating around. I don't know how much some of these are modified however...
http://forum.xda-developers.com/showthread.php?t=486222 -Diamond
http://forum.xda-developers.com/showthread.php?t=483822 - dutty's blackstone rom
http://forum.xda-developers.com/showthread.php?t=485396 - 21018 OEMs but I don't know which rom he used for the dump, might be able to ask.
http://forum.xda-developers.com/showthread.php?t=486216 - TP rom, same as diamond I think.
there's gotta be some more lurking around, but I was just browsing the heavy boards, that's why it's all GSM stuff
Click to expand...
Click to collapse
Drellisdee at PPCGeeks pointed me to a link for a Chinese Blackstone ROM. Grabbed that and got the complete XIP. But the ROM does not include the manifests and individual RGUs to make a usable dump with packages or to recover the SYS. But I was able to use the XIP.
Hello,
Is there an official rom based on the 21018 aku 1.6 ? or it's a beta ?
Great thanks
regards,
Nixeus
activesync is messed up in 21018, use 21015.
dcd1182 said:
activesync is messed up in 21018, use 21015.
Click to expand...
Click to collapse
I disagree. I have been using 21018 for 4 days now, heavy use, including ActiveSync over USB, ActiveSync over Bluetooth, and both with my local desktop as well as an Exchange Server over the air with push mail active. I can't say I've discovered anything broken with 21018.
That said, there was at least one version of 21018 SYS floating around that had a bad .NET load. If you want to try the SYS I'm cooking with, here is a link: http://www.blakemitchellweb.com/former/SYS21018.zip
FormerPalmOS said:
I disagree. I have been using 21018 for 4 days now, heavy use, including ActiveSync over USB, ActiveSync over Bluetooth, and both with my local desktop as well as an Exchange Server over the air with push mail active. I can't say I've discovered anything broken with 21018.
That said, there was at least one version of 21018 SYS floating around that had a bad .NET load. If you want to try the SYS I'm cooking with, here is a link: http://www.blakemitchellweb.com/former/SYS21018.zip
Click to expand...
Click to collapse
Activesync works but the notification to restart the process does not. I have to manually reconnect it anytime the process is killed. My 21018 source is legit, and I use the same .net package with all SYS versions. it seems to be a quirk of the build. The behavior is the same regardless of mxip_notify.vol, and the issue seems to be contained in the repllog.exe binary. I could replace the binary with an earlier build, but it's not my style.
I'll diff your source anyways though just out of curiosity. Thanks.
just FYI, the Shell rgu in your source has the typical chinese idiotic destruction. I wish those guys at xbeta.cn would figure out that modifying rgu in SYS is counterproductive.
I have repaired the rgu here.
dcd1182 said:
just FYI, the Shell rgu in your source has the typical chinese idiotic destruction. I wish those guys at xbeta.cn would figure out that modifying rgu in SYS is counterproductive.
I have repaired the rgu here.
Click to expand...
Click to collapse
Thank you!
dcd1182 said:
Activesync works but the notification to restart the process does not. I have to manually reconnect it anytime the process is killed. My 21018 source is legit, and I use the same .net package with all SYS versions. it seems to be a quirk of the build. The behavior is the same regardless of mxip_notify.vol, and the issue seems to be contained in the repllog.exe binary. I could replace the binary with an earlier build, but it's not my style.
I'll diff your source anyways though just out of curiosity. Thanks.
Click to expand...
Click to collapse
Do you have a CDMA or GSM device? Could be a difference in the ability of or implementation of simultaneous voice and data calls - which I believe GSM can do and CDMA cannot. I have a CDMA device - so it would have to restart any data connections after a voice call - so maybe there's something making that happen which is why I don't see the issue you see. For some reason maybe your data session is disconnecting during a voice call but ActiveSync doesn't know? Just reaching here.
Did you look at the ActiveSync log - anything strange there?
FormerPalmOS said:
Do you have a CDMA or GSM device? Could be a difference in the ability of or implementation of simultaneous voice and data calls - which I believe GSM can do and CDMA cannot. I have a CDMA device - so it would have to restart any data connections after a voice call - so maybe there's something making that happen which is why I don't see the issue you see. For some reason maybe your data session is disconnecting during a voice call but ActiveSync doesn't know? Just reaching here.
Did you look at the ActiveSync log - anything strange there?
Click to expand...
Click to collapse
I have a CDMA titan on Sprint.
Activesync works fine when the process is running. Without going off topic, some of the other things I do require me to kill processes, and AS gets killed pretty often. The problem I am seeing is that the process does not get restarted by the OS if it is killed. Normally, there should be a notification that runs the process upon certain events, ie plugging in a cable. The notification exists in the notifications database, mxip_notify.vol, but for some reason repllog.exe does not launch. As the process is not starting, the log isn't getting anything.
I do not setup my data connection to be persistent. Because I sync with exchange using "as items arrive", AS keeps my data connection active. I would have probably not even noticed the issue (I never look at AS) if I had not noticed the lack of data arrows, meaning no data connection.
I can replace mxip_notify.vol with 21015 version and no change. If I use repllog.exe from 21015, all is well.
However I have seen several other differences in your 21018 source and my own. I may swap your whole SYS in later if I get time.
dcd1182 said:
I have a CDMA titan on Sprint.
Activesync works fine when the process is running. Without going off topic, some of the other things I do require me to kill processes, and AS gets killed pretty often. The problem I am seeing is that the process does not get restarted by the OS if it is killed. Normally, there should be a notification that runs the process upon certain events, ie plugging in a cable. The notification exists in the notifications database, mxip_notify.vol, but for some reason repllog.exe does not launch. As the process is not starting, the log isn't getting anything.
I do not setup my data connection to be persistent. Because I sync with exchange using "as items arrive", AS keeps my data connection active. I would have probably not even noticed the issue (I never look at AS) if I had not noticed the lack of data arrows, meaning no data connection.
I can replace mxip_notify.vol with 21015 version and no change. If I use repllog.exe from 21015, all is well.
However I have seen several other differences in your 21018 source and my own. I may swap your whole SYS in later if I get time.
Click to expand...
Click to collapse
Good info - thanks. I did notice that if I kill repllog.exe it doesn't re-start on its own unless I plug in my USB cable or otherwise activate a data connection. I also notice that in my notifications queue I have repllog entries for RS232 events, RNDISFN events and time change events - but nothing that would trigger it to restart, though this explains why it launches when I plug-in USB. If I switch the ActiveSync schedule from "As Items Arive" to "Every 5 minutes" a new notification gets pushed onto the queue, but the time is now, not 5 minutes from now or anything. HOwever after I manually sync, the top-of-the-queue notification changes to 5 minutes from now - meaning if repllog did die, it should re-start.
Note - if you close the ActiveSync GUI, it also shuts down repllog.exe. I guess a huge question is this - is there something broken in 21018 with the pushmail notification - i.e. when the phone receives the push notification over the paging channel (like an SMS) and repllog isn't running, will it restart repllog? I'll test this out.
So it would seem that I would have the same issue as you - except maybe my ActiveSync isn't shutting off on voice calls? I'll play with this a bit - something different to do in an otherwise boring day.
FormerPalmOS said:
Good info - thanks. I did notice that if I kill repllog.exe it doesn't re-start on its own unless I plug in my USB cable or otherwise activate a data connection. I also notice that in my notifications queue I have repllog entries for RS232 events, RNDISFN events and time change events - but nothing that would trigger it to restart, though this explains why it launches when I plug-in USB. If I switch the ActiveSync schedule from "As Items Arive" to "Every 5 minutes" a new notification gets pushed onto the queue, but the time is now, not 5 minutes from now or anything. HOwever after I manually sync, the top-of-the-queue notification changes to 5 minutes from now - meaning if repllog did die, it should re-start.
Note - if you close the ActiveSync GUI, it also shuts down repllog.exe. I guess a huge question is this - is there something broken in 21018 with the pushmail notification - i.e. when the phone receives the push notification over the paging channel (like an SMS) and repllog isn't running, will it restart repllog? I'll test this out.
So it would seem that I would have the same issue as you - except maybe my ActiveSync isn't shutting off on voice calls? I'll play with this a bit - something different to do in an otherwise boring day.
Click to expand...
Click to collapse
OK - tried the following. Set ActiveSync schedule to "As items arrive". Then killed repllog.exe. Then sent myself an e-mail. Repllog.exe did restart on its own and the e-mail was received.
so does this sys work better than 15 or not?
dcd have you looked at any of these builds 21027, 21028, 21032
dcd or anyone else was wondering if you had any opinions on these builds 21027, 21028, 21032 (looks like they are 6.1 builds not sure report from ppcgeeks they are 21027 is supposed to be from HTC Rhodium. 21028 & 21032 are rumored to be from Diamond2 & Touch Pro2 devices.)
http://forum.ppcgeeks.com/showthread.php?t=60512

Help

Ok so i am using football's leo 1.5 and the radio that accompanies it, on a german hd2 ... everything is really smooth and non-buggy. however i have no data access and im not really sure whats wrong. can anyone help please, i really want to have my mail and gtalk back...
Droski said:
I have installed football's leo 1.5 wwe and the radio specified for it on a german hd2, everything is reponsive and calls work fine, however i do not have access to email, internet, gps is there something i have to do. I have been seraching for a couple of days now and no data connection is kinda #$^y. Thanks to anyone that can help.
Click to expand...
Click to collapse
if you mean the new 3.14 tmous rom, it is because the tmous roms do not contain the "connectionsetup" that all the other roms come with.
find "connectionsetup.cab" and install it, then when you restart it will set up data and mms for you.

Categories

Resources