Related
odin froze, yellow ! phone/computer symbol, cant get into download mode
ive read all the threads still cant get it to work, i was trying to flash back to stock rom.
this thing will no go into download mode at all, ive tried every method.
scooterman said:
odin froze, yellow ! phone/computer symbol, cant get into download mode
ive read all the threads still cant get it to work, i was trying to flash back to stock rom.
this thing will no go into download mode at all, ive tried every method.
Click to expand...
Click to collapse
yeah ur pretty much ****ed. you got the locked vibrant. call tmo tell them to send u another one
scooterman said:
odin froze, yellow ! phone/computer symbol, cant get into download mode
ive read all the threads still cant get it to work, i was trying to flash back to stock rom.
this thing will no go into download mode at all, ive tried every method.
Click to expand...
Click to collapse
relax, remove battery and turn the phone on again. you should be ok.
i took the battery out like 25 times still wouldn't work.
a replacement is coming
When I got that screen, holding down the vol up and vol down then popping the battery in launched me right into dl mode, and was the only way of all the methods that worked. Be sure you remove your sd and sim cards too. Good luck
Sent from my SGH-T959 + bionix 1.3 (= sexiness) using XDA App
I had this twice yesterday. You've got to wait longer when trying to get into dl mode, but that screen will flash black, when it does, let go of power.
Happened to me this morning.
After trying several methods with no luck I damn near had a heart attack.
Thankfully I found a thread by senior member Anderoid entitled "Solution to fix any brick". I followed the directions to the "t" and it worked like a charm.
I would suggest giving it a try if you have not already.
A way that has seem to work for me every time is while the phone is "OFF" hold the Vol +/- and at the same time plug the USB cable into my "phone" while the other end is already plugged in to your PC.
easiest way out of this screen (if your phone isnt hardware locked) is to hold the 3 buttons down, screen will flash black, then back to the phone ! computer, keep holding the 3 buttons down, screen will flash black again, release power.
Works every time for me.
Well, after spending almost 11 hours trying to boot into recovery or download, I know for sure that there is something going on with my phone re: hardware locked. The date on my box is 7-16. It is an early Vibrant. But no matter what I do, I cannot get into download or recovery which means my ****ing phone is literally worthless.
I have tried all possible thousands of combination's of buttons, batteries, and cords while booting and nothing happens.
The Vibrant logo shows, then it shows the pink, annoying as hell T-mobile logo, than goes to the Galaxy S logo which loads for a little bit and then just leads me to a black screen. Eventually the 4 buttons on the front of the phone turn on and then nothing else happens. It will just sit like this forever.
I know all I need to do is get a working ROM loaded but it is literally impossible to do so.
Can anyone offer any suggestions? Or are anyone else having the same problem?
I guess the only way I can get a working phone is to get in touch with T-mobile and do a Warranty exchange. That's a damn shame too, because I will be without a working phone for a week.
What about using adb?
adb reboot recovery -or- adb reboot download ?
I had a hw locked vibrant, never tried the adb reboot download, recovery did work.. I added another line on my account last night for somone, who got a vibrant, theirs wasn't hw locked, so I traded 'em ;P
Agree with the above poster I have been stuck on the vibrant screen or dark screen and adb still worked to save me
when i try to use adb, it just tells me that it cant find the device. i'm not able to boot into android OS at all.... screen just hangs. so my computer is never getting a chance to see my phone hence why i cant use adb to reboot it into recovery or download.
I believe your device has to go into recovery mode then check with and devices and if you see a device I THINK it is and reboot download, I am 90% certain
Sent from my SGH-T959 using Tapatalk
have you installed the drivers? phone DOES NOT have to boot into android for adb to read it.
98classic said:
have you installed the drivers? phone DOES NOT have to boot into android for adb to read it.
Click to expand...
Click to collapse
i do believe i have the correct drivers installed. i was able to use adb to run lagfixes before i was having this problem. when i boot my phone, i get a sound from my computer saying that it recognizes a usb device. the two drives in the vibrant show up in My Computer but i cannot access them as windows says they are not accessable at the moment.
at what point will adb be able to recognize my phone when booting? no matter what i do when i try adb shell i get error: device not found
It could be the phone not bring in debugging mode, either because it's been turned off or the os isn't getting far enough to turn it on. I think I've been able to get adb to recognize my phone even while it was booting up (at the white vibrant screen). Maybe you can try adb then?
Same problem here. I probably just have to sell it fast on ebay or something. Hopefully some kind of fix starts by the end of the week. First phone in my smartphone life to brick from a simple Voodoo lag fix. Please XDA gods find a solution.
crazycaveman said:
It could be the phone not bring in debugging mode, either because it's been turned off or the os isn't getting far enough to turn it on. I think I've been able to get adb to recognize my phone even while it was booting up (at the white vibrant screen). Maybe you can try adb then?
Click to expand...
Click to collapse
nope, no go. adb will not recognize my device no matter what. and the device isnt loading the OS so i cannot turn debugging on. i guess this is a real "brick" then.
This sounds like a rant rather than a question. Just sayin'.
DKYang said:
This sounds like a rant rather than a question. Just sayin'.
Click to expand...
Click to collapse
fixed that. my bad.
Check my thread in the dev section... I can get ADB working when you are stuck at the vibrant screen... MIGHT... just might work in your situation...
My thread is probably fallen back a few pages now... its a [Guide] [Think Tank]
renocivik said:
Check my thread in the dev section... I can get ADB working when you are stuck at the vibrant screen... MIGHT... just might work in your situation...
My thread is probably fallen back a few pages now... its a [Guide] [Think Tank]
Click to expand...
Click to collapse
thanks for the suggestion. i found your thread and went through the steps in the OP... still no luck. no matter what i do, i cannot get passed the black screen the loads after the galaxy s logo. i also cannot get into download mode or recovery no matter what combination of button presses i use.
just do the following , i used to have the problem of going into the download mode and this is what realy worked to me :
1- turn off the phone.
2- plug in the USB cable.
3- wait until the battery green charging start.
4- press the vol + , vol - , the power botton together.
5- when the screen gose black release the power botton only.
you should now be in the downloading mode
core99 said:
just do the following , i used to have the problem of going into the download mode and this is what realy worked to me :
1- turn off the phone.
2- plug in the USB cable.
3- wait until the battery green charging start.
4- press the vol + , vol - , the power botton together.
5- when the screen gose black release the power botton only.
you should now be in the downloading mode
Click to expand...
Click to collapse
this isnt working either. :-(
I just fixed this on my phone. Your phone will go into download mode. Plug the phone in and wait for the battery symbol to fully load. Hold Vol + and _ and PWR until it goes black, then release the PWR button only. It will go into DL mode. Fire up Odin, and flash the "Froyo that does not brick" ROM. It will boot into the i9000 recovery mode and give you an error. Hold the Vol + and - and PWR again and release PWR when the phone goes black. It will go into DL mode again. Now with Odin, flash the factory firmware, making sure to click re-partition this time. After the phone reboots, it will fire right up into the factory ROM.
atoz350 said:
I just fixed this on my phone. Your phone will go into download mode. Plug the phone in and wait for the battery symbol to fully load. Hold Vol + and _ and PWR until it goes black, then release the PWR button only. It will go into DL mode. Fire up Odin, and flash the "Froyo that does not brick" ROM. It will boot into the i9000 recovery mode and give you an error. Hold the Vol + and - and PWR again and release PWR when the phone goes black. It will go into DL mode again. Now with Odin, flash the factory firmware, making sure to click re-partition this time. After the phone reboots, it will fire right up into the factory ROM.
Click to expand...
Click to collapse
this is exactly the method i want to try. but unfortunately i cannot get the phone into recovery or download mode. i have tried at least 100 times now with many different combination's of plugging the usb cord in and pressing the volume and power buttons.
two ideas: one, is it possible that i wiped recovery and download mode from my phone on accident? the reason why i ask is that i was super tired and flashing roms and kernels to my phone. i flashed back to my original stock rom and then i flashed the kernel. for some reason, i selected wipe date/cache in Rom Manager before flashing the kernel. i have no idea why i did this. seriously. totally noob move. so im assuming i have a kernel flashed but now there is no ROM installed for the phone to boot into.
two, if above is not the issue, than im going to assume that the phone is not recognizing any button presses while its off, so when i turn it on it just recognizes that the power was pressed and ignores the volume presses, thus not booting the phone into recovery or download.
edit: i should mention again that at no time does adb recognize my device. so i cannot use adb to reboot the phone into the mode i need.
just a comment for the OP - the vibrant isnt worthless, it is something that YOU did to get the phone into its current state. So dont blame the phone for something that it didnt do on its own.
/end rant
byt3b0mb said:
just a comment for the OP - the vibrant isnt worthless, it is something that YOU did to get the phone into its current state. So dont blame the phone for something that it didnt do on its own.
/end rant
Click to expand...
Click to collapse
I understand what you mean. I appreciate your criticism of my original post. Let me say that I wrote it while frustrated. But I know that isn't an excuse.
The device is fantastic. I know that I did this to it myself. It's unfortunate.
Anyways, I received a replacement phone. I will be more careful this time.
Hi All,
So, I tried to flash Cyanogen mod last night using the instructions here: http://wiki.cyanogenmod.com/wiki/Samsung_Vibrant:_Full_Update_Guide. I was coming from a BIONIX ROM that flashed fine.
Anyways, the phone went into a reboot loop in the recovery screen and I foolishly just held the power button until it stopped. When I turned it back on it was broken. That is, now all it does is display the white Vibrant logo in the middle of the screen with the smaller Samsung logo below it. If I hold the power button for about 8 seconds the screen goes black for about 2 seconds and then comes right back up to where it was. I can't seem to even turn the phone off any more. It just stays on that screen permanently unless I hold the power button, in which case the screen is off for 2 out of every 10 seconds. Yanking the battery of course turns it off, but putting it back in immediately returns it to the state I've described.
I've scoured these forums and tried every button press + battery state + cable state + SD card/SIM state combo suggested, but the phone won't go to download or recovery mode. I found one thread describing the exact same problem. The OP said he'd try a jig and then disappeared without any further updates. I'm going to try to get my friend to make a jig using one of these sets of instructions
http://forum.xda-developers.com/showthread.php?t=819551
http://factoidz.com/how-to-unbrick-your-samsung-vibrant-galaxy-s/
but until then my questions is: does anyone have any experience with this problem (can't even turn the phone off)? If so, do you have any recommendations? Did a Jig work?
keep trying to get to download mode, pull battery, plug usb in to computer and to the phone, while holding both volume up and volume down pop in the battery. People have tried hundreds of times with it not working and then all of a sudden *bam* download mode.
So... my friend made me a jig and it works in that I can see the shoveling droid indicating download mode. However Heimdall/Odin won't recognize my phone. Heimdall's zadig utility won't locate the phone either, even with the cable plugged in. I'm, once again, stumped.
Just an update; I've tried Odin on three different computers, two Windows 7 (64 bit) and a Mac (with Heimdall). None of them seem to recognize the phone. Device manager on the Windows 7 machine does not update when I plug the phone in (in Download mode via the jig or not) and I can't find anything about Samsung in it anywhere. However I have installed the Samsung drivers; a few different sets I've found around the forums. I've also tried a couple utilities like the Vibrant toolbox and one click unbrick. Nothing seems to have any effect. I was so hopeful when the jig worked and got me to download mode, but now it's seeming I'm actually bricked. Has anyone seen a phone that could get to download mode but still be bricked? Oh, and I checked the cable using a friend's phone; her Mac recognized her phone using the cable. Haven't tried her phone on my Window's machines though.
Once again, any help is more than appreciated.
Have you tried to see if adb is working? If it does then try adb reboot recovery? If it works there is a file I can post for you later (is in my pc) that can restore your sbl.bin and fix your download mode problems.
Thanks for your help everyone, the problem was apparently resolved by a new cable; which is strange because the old one works for data transfers... just not for flashing apaprently. :S
Sometimes my I5500 won't turn on.
This has already happened 2 times (with two different firmwares I5500XWJPL and I5503TTLPJP9). The phone shows absolutely no signs of life - screen is black, no sounds, nothing.
I tried everything: pressing VolumeDown+Center+Power, VolumeDown+Home+Power, with or without battery/SIM/charger/SD. Tried removing battery for 30 minutes, charging battery in external charger.
Sometimes when charger is connected, it shows green battery on the screen, but still won't boot.
Last times I spent several hours fiddling with it until it finally turned on..
Can someone tell my if there is a fast way to revive the phone next time this happens?
Maybe your arm11boot is damaged, but still partly working. You need replace that partition. I saw arm11boot partition image in one Russian FW. I can't remember actual name. You can try that, but caution. You might brick your phone compleatly!
sorry for reviving this thread.
but I got the same problem now. Tried to use ROM Manager to install CWM Recovery (following a blogpost explaining how to install a Custom ROM on the SG5). Might have accidentally clicked a different CWM Rec. version than I thought I did. However, ROM manager showed a message, telling me that CWMR was installed correctly.
So I wanted to boot into CWMR up to flash my device with the latest CyanogenMod 7 port from MADTeam. Used the "boot into recovery" option from ROM manager for that purpose. The next thing I know is my phone not reacting to anything.
Tried all methods mentioned afore (Vol- + Home + Power / Vol- + Center + Power, with/w.o. SD card and/or battery inserted). Screen keeps being off, no sign of life, phone wont even do anything when plugged to my PC or a charger.
The phone has been rooted properly before and was running Stock 2.1. Houston, we've got a problem.
Rigardi said:
sorry for reviving this thread.
but I got the same problem now. Tried to use ROM Manager to install CWM Recovery (following a blogpost explaining how to install a Custom ROM on the SG5). Might have accidentally clicked a different CWM Rec. version than I thought I did. However, ROM manager showed a message, telling me that CWMR was installed correctly.
So I wanted to boot into CWMR up to flash my device with the latest CyanogenMod 7 port from MADTeam. Used the "boot into recovery" option from ROM manager for that purpose. The next thing I know is my phone not reacting to anything.
Tried all methods mentioned afore (Vol- + Home + Power / Vol- + Center + Power, with/w.o. SD card and/or battery inserted). Screen keeps being off, no sign of life, phone wont even do anything when plugged to my PC or a charger.
The phone has been rooted properly before and was running Stock 2.1. Houston, we've got a problem.
Click to expand...
Click to collapse
Take your battery out, put it back in and turn your phone on, then it will boot up into recovery mode. I also have this problem from time to time, sometimes it boots into recovery, sometimes not and i have to remove/replace the battery.
I actually thought that this might be a useful feature for say - if you wanted to upgrade a friends phone to cyanogenmod in the pub, for example.
did try that. now even had the battery removed for about an hour. put it back in. still no reaction on pressing the power button or one of the combinations that should put it into recovery or download mode. no sign of life when plugging the phone to my computer or the charger.
I do fear the worst, though I dont know how ROM manager was actually able to brick the phone that badly.
Rigardi said:
did try that. now even had the battery removed for about an hour. put it back in. still no reaction on pressing the power button or one of the combinations that should put it into recovery or download mode. no sign of life when plugging the phone to my computer or the charger.
I do fear the worst, though I dont know how ROM manager was actually able to brick the phone that badly.
Click to expand...
Click to collapse
In that case then this also happened to me - While exploring the rom manager application after first ever flashing my phone i accidentally selected the wrong phone model from the 'flash clockworkmod recovery' option and my phone was gone forever. Perhaps your problem is similar.
(Luckily it was under warranty and they replaced it. The method worked so well in fact it happened 'accidentally' a second time i acquired a 3rd i5500 out of the box )
bought mine already used, so no chance for a warranty replacement :/
gonna give it a shot with a usb jig now, maybe i can get the thing into d/l mode with that, so I can revive it with odin.
Rigardi said:
bought mine already used, so no chance for a warranty replacement :/
gonna give it a shot with a usb jig now, maybe i can get the thing into d/l mode with that, so I can revive it with odin.
Click to expand...
Click to collapse
what about the Emergency DLoad Mode, which is not the Download Mode? Did you try it?
{ brvsn ~ CM7 on GT-I5500 ~ Tapatalk }
how do I access emergency d/l mode?
UPDATE
I actually CAN get download mode (or what I assume it to be) running by pressing Vol- + Menu + Power (while Vol- + Home + Power wont do anything, nor does the USB jig that arrived today). Took me some time to discover this, as this doesnt seem to be the usual 3-button-combination used. BUT: while the phone is now recognized by my PC, it wont show anything on the screen.
Odin (tried 4.28 and 4.43 on both win7 x64 and x32 and everyting related to Kies shut down) does now detect my phone. However, it always gets stuck at "Setup Connection" when I try to flash the stock rom or CWMR. Tried different approaches (from starting DL-mode with the phone being connected to my PC to separately starting DL mode and then connecting, starting it up with the battery already being in place, starting it up with sliding the battery in place while holding the 3 buttons etc.), none of them gets me further so far.
Another hint I found was setting the Baud-rate of the Samsung mobile modem to 203400, but this, unfortunately, didnt change anything.
Anyone got a lead on how to get Odin finally started properly?
Rigardi said:
UPDATE
I actually CAN get download mode (or what I assume it to be) running by pressing Vol- + Menu + Power (while Vol- + Home + Power wont do anything, nor does the USB jig that arrived today). Took me some time to discover this, as this doesnt seem to be the usual 3-button-combination used. BUT: while the phone is now recognized by my PC, it wont show anything on the screen.
Odin (tried 4.28 and 4.43 on both win7 x64 and x32 and everyting related to Kies shut down) does now detect my phone. However, it always gets stuck at "Setup Connection" when I try to flash the stock rom or CWMR. Tried different approaches (from starting DL-mode with the phone being connected to my PC to separately starting DL mode and then connecting, starting it up with the battery already being in place, starting it up with sliding the battery in place while holding the 3 buttons etc.), none of them gets me further so far.
Another hint I found was setting the Baud-rate of the Samsung mobile modem to 203400, but this, unfortunately, didnt change anything.
Anyone got a lead on how to get Odin finally started properly?
Click to expand...
Click to collapse
ops, sorry: I miss your previous message!!
Now I got it and read this last post.. let some time to think about it, I'll replay soon.. but, generally speaking, at this point there's not so much you can do..
If you can get it into Download or Recovery mode, then you should be fine.
Sent from my GT-I5500 using XDA App
Rigardi said:
UPDATE
I actually CAN get download mode (or what I assume it to be) running by pressing Vol- + Menu + Power (while Vol- + Home + Power wont do anything, nor does the USB jig that arrived today). Took me some time to discover this, as this doesnt seem to be the usual 3-button-combination used. BUT: while the phone is now recognized by my PC, it wont show anything on the screen.
Odin (tried 4.28 and 4.43 on both win7 x64 and x32 and everyting related to Kies shut down) does now detect my phone. However, it always gets stuck at "Setup Connection" when I try to flash the stock rom or CWMR. Tried different approaches (from starting DL-mode with the phone being connected to my PC to separately starting DL mode and then connecting, starting it up with the battery already being in place, starting it up with sliding the battery in place while holding the 3 buttons etc.), none of them gets me further so far.
Another hint I found was setting the Baud-rate of the Samsung mobile modem to 203400, but this, unfortunately, didnt change anything.
Anyone got a lead on how to get Odin finally started properly?
Click to expand...
Click to collapse
download mode is Vol - / Central Button / Power..
Im aware of that. However, Vol- + Menu + Power is the only key combination that the phone will react upon.
Anyway. Brought it to a mobile phone shop on friday, called them on monday and according to them, the phone should be fixed by tomorrow, wednesday. Seems like ROM manager has done damage that cant be undone without knowing how to handle a JTAG device. But at least its not completely broken. Learning that will cost me 25 Euros, though.
One final update to this: Got the phone back today, they were indeed able to fix it.
Conclusion:
While installing a non-fitting CWM-Recovery through ROM Manager will make your Galaxy 5 unfixable via Odin, it still can be saved by making proper use of a JTAG.
Rigardi said:
One final update to this: Got the phone back today, they were indeed able to fix it.
Conclusion:
While installing a non-fitting CWM-Recovery through ROM Manager will make your Galaxy 5 unfixable via Odin, it still can be saved by making proper use of a JTAG.
Click to expand...
Click to collapse
... for only 25 €!!!
{ brvsn ~ CM7 on GT-I5500 ~ Tapatalk }
My samsung vibrant running 4.0.4 ICS zenwich 1.8.4 randomly shut off today, not even able to turn on, it was the Sleep of Death I have got before, so i pulled battery and reboot, still nothing.
The phone now boots, but their is no display
The phone will literally turn on, have the 4 buttons light up on the bottom, have the screen be responsive to touches, but the physical display is off
I can unlock my phone by swiping, hear the volume up sound, even dial calls by blind touching. It is the same idea as a PC that is plugged in, just so VGA cable to the monitor.
I have tried rebooting to recovery, download mode and tried to heimdall, but it never finds my device, i tried to sdk in and reboot to download mode via cmd prompt but no luck finding device too
I am all out of ideas and nothing is seems to be working
Any advice on resolving this issue would be appreciated
wafflebroski said:
My samsung vibrant running 4.0.4 ICS zenwich 1.8.4 randomly shut off today, not even able to turn on, it was the Sleep of Death I have got before, so i pulled battery and reboot, still nothing.
The phone now boots, but their is no display
The phone will literally turn on, have the 4 buttons light up on the bottom, have the screen be responsive to touches, but the physical display is off
I can unlock my phone by swiping, hear the volume up sound, even dial calls by blind touching. It is the same idea as a PC that is plugged in, just so VGA cable to the monitor.
I have tried rebooting to recovery, download mode and tried to heimdall, but it never finds my device, i tried to sdk in and reboot to download mode via cmd prompt but no luck finding device too
I am all out of ideas and nothing is seems to be working
Any advice on resolving this issue would be appreciated
Click to expand...
Click to collapse
Device Manager show anything is plugged in?
FaultException said:
Device Manager show anything is plugged in?
Click to expand...
Click to collapse
Yes, It shows up as the linusb winusb t-959 but neither heimdall or android sdk find the device.
wafflebroski said:
Yes, It shows up as the linusb winusb t-959 but neither heimdall or android sdk find the device.
Click to expand...
Click to collapse
So were you able to get into Download Mode at all? And if so was the display on then?
FaultException said:
So were you able to get into Download Mode at all? And if so was the display on then?
Click to expand...
Click to collapse
i think it did because it wasnt at a lock screen, and when i touched the soft buttons they would light up, but the phone wasnt in an OS.
the screen was still off though, I can't get anything to make it turn on
wafflebroski said:
i think it did because it wasnt at a lock screen, and when i touched the soft buttons they would light up, but the phone wasnt in an OS.
the screen was still off though, I can't get anything to make it turn on
Click to expand...
Click to collapse
What method did you use to get into Download Mode?
FaultException said:
What method did you use to get into Download Mode?
Click to expand...
Click to collapse
take battery out, hold vol + and - and power button, put battery in while usb connected
wafflebroski said:
take battery out, hold vol + and - and power button, put battery in while usb connected
Click to expand...
Click to collapse
You may've gotten into recovery, I can't really get into download mode like that. Try this:
Unplug USB & remove battery
Insert battery but do not power on.
Hold VOL-UP + VOL-DOWN
Insert USB and wait a few seconds, while still holding them
FaultException said:
You may've gotten into recovery, I can't really get into download mode like that. Try this:
Unplug USB & remove battery
Insert battery but do not power on.
Hold VOL-UP + VOL-DOWN
Insert USB and wait a few seconds, while still holding them
Click to expand...
Click to collapse
Ok that works, I'm defineatly in download mode, the device shows up in ODIN, but not heimdall. I am not familiar with ODIN, how would I go about flashing the ICS zen rom? I found a tutorial to flash back to stock ROM and wipe all data, but I would like to be able to just reflash the ICS rom
wafflebroski said:
Ok that works, I'm defineatly in download mode, the device shows up in ODIN, but not heimdall. I am not familiar with ODIN, how would I go about flashing the ICS zen rom? I found a tutorial to flash back to stock ROM and wipe all data, but I would like to be able to just reflash the ICS rom
Click to expand...
Click to collapse
Ok, so it shows the download mode on the screen of the phone?
If so, that's good news and means your screen is not shot.
Try to get Heimdall to work. Are you in windows? Then you'll need to uninstall the samsung drivers and do this (from CM update guide):
CM update guide said:
1. Run the included zadig.exe in the drivers folder of the Heimdall Suite.
2. From the menu, choose Options » List All Devices.
3. From the drop down, select Samsung USB Composite Device or Gadget Serial.
4. Click Install Driver.
NOTE: A prompt may appear warning that the installer is unable to verify the publisher of the driver. Ignore it and select "Install this driver anyway."
5. Heimdall can now be used safely on the Windows computer.
Click to expand...
Click to collapse
Once heimdall is running, try grabbing the boot.img out of the zen zip and do this:
Code:
heimdall flash --kernel boot.img
See if anything comes of that.
The screen never turned on.. it just went into download mode and i was able to see from ODIN that it was recognized. So i ODIN'd back to stock rom, i heard the phone reboot, but still no display.
Like before the phone's screen is 100% responsive, i can unlock the phone, hear the usb plugging in noise, just no display. It just blows my mind because the screen works but its not on.. I am very confused
wafflebroski said:
The screen never turned on.. it just went into download mode and i was able to see from ODIN that it was recognized. So i ODIN'd back to stock rom, i heard the phone reboot, but still no display.
Like before the phone's screen is 100% responsive, i can unlock the phone, hear the usb plugging in noise, just no display. It just blows my mind because the screen works but its not on.. I am very confused
Click to expand...
Click to collapse
That's not good. Your phone might be done for then. I once repartitioned with no partition files and still download mode worked on a fresh battery pull.
Maybe try leaving the battery out for a while and see if it fixes itself, since it seems to be an electronics problem, maybe something needs time to reset or something.
Sent from my SGH-T959 using xda premium
Yea I've had the battery out for over 30 mins and nothing. I even opened up my phone last night to check all the ribbon wires and connections, everything looked fine and i removed the motherboard & replugged everything in.. still no luck
it's a good thing my contract is up I think I am going to get the samsung galaxy s 3..
RIP vibrant best phone i ever had, I'm surprised it lasted this long with all the mods I had done to it haha
my xt890 lcd screen and digitizer were broken so i changed them and the phone was working fine for a week, i then wanted to update to kitkat through oem update; everytime i tried it would give me error . i then read that since i unlocked bootloader and rooted my phone and installed cwm recovery i couldnt do an oem update and i had to do a factory reset in order to update through oem, so i did just that ; after the phone finished factory reset and booted i proceeded with oem update while the phone was charging, everything was going fine the file was downloading, i went to the bathroom and came back the display was black, but touch screen was working fine...through more searching i read that this could be from the update, and i should do another reset... since i couldnt see anything even recovery menu. i downloaded moborobo so i can see my screen on pc and proceeded to factory reset ... now i cant even see through moborobo and im stuck. i think im stuck in recovery screen, but no way to be sure , hence i cant get usb debug.Please help.