I've flashed more than 15 roms ( nrgz ,elegancia, dutty ,.....) after task 29 of course and after formating the sd and my problem is :
The phone recognise and connect to the headset and the other devices but the BT devices doesn't work .Is it a driver problem or what ?
What BT device are you trying?
Model, company,etc. ...
my sony ericsson mw600 has the same problem, i think its not so old edition to be excluded from the drivers, its only connecting as headset but fails at bt stereo, it happened with Nrgz roms18/10 and 26/10 editions, i think you must be carefull with the type of drivers you use.
thank you
my bt :nokia , samsung and sony ericsson....5 headsets ,1 car kit , 1wrist watch
All connects ,none works
Related
Please me fix my Bluetooth...
I cannot see the percentage when beaming a file over BT.
Also Device fails after having succesfully paired up with other device and loses connection ...
Thank you
what other bluetooth device are you pairing with? is the problem consistent when pairing with other devices? most of the problems on bluetooth that i've had were from the hardware that i usd in my pc. mostly due to the driver being used.
palmmanpalm said:
what other bluetooth device are you pairing with? is the problem consistent when pairing with other devices? most of the problems on bluetooth that i've had were from the hardware that i usd in my pc. mostly due to the driver being used.
Click to expand...
Click to collapse
Up to I have tried ... Motorola KrZRed, HTC Touch , Sony Ericsson Z710i.
....
Doesn;t establish connection even after sucessful pairing...
Doesn't show Progress bar...
What rom you using? This can effect bluetooth sometimes..Cheers...
ultramag69 said:
What rom you using? This can effect bluetooth sometimes..Cheers...
Click to expand...
Click to collapse
ROM version : CRCs PHKv12r9
ROM Date : 11/06/07
Radio version : 1.16.00.00
Protocol Version : 32.53.7018.01H
I have installed Resco Explorer and this does help when I Transfer/Beam a file to someone.
When I receive a beam/BT connection it doesn't show a Progress Bar.
Also eventhough this works ... I lose connection and have to pair device over and over again ... Very Frustrating ... Is there a Fix ?
Hello,
I am an owner of Xperia X10 mini pro running 2.1 version of android (latest official firmware release). After the update to 2.1, I am experiencing some difficulties with the connection to a bluetooth handsfree in my car (Parrot CK3000 Evolution). The problem is that I am able to pair the phone with the device, however I cannot connect to it (it is still shown in the bluetooth device list as Parrot v5.10D with a description "Paired but not connected").
Before the update, it worked perfectly with android 1.6.
Because now I am very annoyed of this problem, I have started to investigate more and managed to log some error messages:
I/bluetoothd( 5496): link_key_request (sba=58:17:0C:FA:F4:B8, dba=00:12:1C:EB:25:ED)
E/BluetoothEventLoop.cpp( 1192): event_filter: Received signal org.bluez.DeviceropertyChanged from /org/bluez/5496/hci0/dev_00_12_1C_EB_25_ED
E/BluetoothEventLoop.cpp( 1192): event_filter: Received signal org.bluez.AdaptereviceFound from /org/bluez/5496/hci0
E/bluetoothd( 5496): rec is NULL
E/bluetooth_common.cpp( 1192): dbus_func_args_timeout_valist: D-Bus error in GetServiceAttributeValue: org.bluez.Error.Failed (GetServiceAttribute Failed)
D/dalvikvm( 1610): GC freed 439 objects / 16592 bytes in 169ms
I/bluetoothd( 5496): link_key_request (sba=58:17:0C:FA:F4:B8, dba=00:12:1C:EB:25:ED)
I/BluetoothEventLoop.cpp( 1192): agent_event_filter: Received method org.bluez.Agent:Authorize
I/BluetoothEventLoop( 1192): Rejecting incoming 0000111F-0000-1000-8000-00805F9B34FB connection from 00:12:1C:EB:25:ED
D/BluetoothEventLoop( 1192): onAgentAuthorize(/org/bluez/5496/hci0/dev_00_12_1C_EB_25_ED, 0000111F-0000-1000-8000-00805F9B34FB) = false
E/bluetoothd( 5496): Agent replied with an error: org.bluez.Error.Rejected, Authorization rejected
E/bluetoothd( 5496): Access denied: Authorization rejected
Click to expand...
Click to collapse
Please anyone, have you ever seen such problem? Do you have any suggestions how to deal with it? I also tried to manually use hcitool and hidd to connect to the device (found on the androidobex homepage), but hidd --connect gave me an "Unknown Error". I do not know if this is a bluez bug or anything else, but I am stuck now.
Any help/suggestions would be appreciated.
Thanks!
Marian
mbystrican said:
Hello,
I am an owner of Xperia X10 mini pro running 2.1 version of android (latest official firmware release). After the update to 2.1, I am experiencing some difficulties with the connection to a bluetooth handsfree in my car (Parrot CK3000 Evolution). The problem is that I am able to pair the phone with the device, however I cannot connect to it (it is still shown in the bluetooth device list as Parrot v5.10D with a description "Paired but not connected").
Before the update, it worked perfectly with android 1.6.
Because now I am very annoyed of this problem, I have started to investigate more and managed to log some error messages:
Please anyone, have you ever seen such problem? Do you have any suggestions how to deal with it? I also tried to manually use hcitool and hidd to connect to the device (found on the androidobex homepage), but hidd --connect gave me an "Unknown Error". I do not know if this is a bluez bug or anything else, but I am stuck now.
Any help/suggestions would be appreciated.
Thanks!
Marian
Click to expand...
Click to collapse
Sry man, I dont use bluetooth handsfree, but if problem persist, you can downgrade to 1.6, or trying installing some custom rom.
mbystrican said:
Hello,
I am an owner of Xperia X10 mini pro running 2.1 version of android (latest official firmware release). After the update to 2.1, I am experiencing some difficulties with the connection to a bluetooth handsfree in my car (Parrot CK3000 Evolution). The problem is that I am able to pair the phone with the device, however I cannot connect to it (it is still shown in the bluetooth device list as Parrot v5.10D with a description "Paired but not connected").
Before the update, it worked perfectly with android 1.6.
Because now I am very annoyed of this problem, I have started to investigate more and managed to log some error messages:
Please anyone, have you ever seen such problem? Do you have any suggestions how to deal with it? I also tried to manually use hcitool and hidd to connect to the device (found on the androidobex homepage), but hidd --connect gave me an "Unknown Error". I do not know if this is a bluez bug or anything else, but I am stuck now.
Any help/suggestions would be appreciated.
Thanks!
Marian
Click to expand...
Click to collapse
I had this problem a few months ago, but I directly had the 2.1 version, so I don't know if it worked with 1.6 firmware.
The problem was in the ck3000 I updated it to version 5.25C and it started to work perfectly.
Whatever, before update your handsfree try to weap its memory pressing both buttons at time for a few seconds, erase the device from your bluetooth devices list in the phone, then try to connect them again. (password 1234 in ck3000 evolution, if you don't remind it).
If it doesn't work... you should have to update it in a garage or repair shop, because this handsfree doesn't admit bluetooth update.
I promise you that with that ck3000 firmware version and the original sony version of the x10 mini pro firmware 2.1 it works.
In other kind of things... Now I have problems with cyanogen minicm7pro v21 and this bluetooth. It connects, speakers and the microphone work perfect, but buttons to pick up and down calls don't work.
Do you know something about?
I'm looking in forums but I don't find anything...
PD: Sorry about my english, it is not my natural language
Delete paired connection and reboot. Again pair device. May this help you.
Sent from my U20i using XDA Premium App
I have installed an cyanogem 9 Fx 125, and i can't pair my phone with another devices(notebook, cellphone), someone can help me?
In my device name is displayed how "bluez", another devices no conect with me too...
What to do, to fix this issue?
My phone model: Xperia Neo
P.S:Translated by Google Tradutor
make sure your device is "discoverable"
zmbutt said:
make sure your device is "discoverable"
Click to expand...
Click to collapse
I tried the notebook and on some phones, but when they are unable to pair.
My cell phone appears like a wireless hd, named "Bluez", no one can pair with it.
News
Now my laptop found and add my phone in Bluetooth devices, but the bluetooth operations don't work(audio, serial com ports, etc) i receive this message from windows: "This device don't' support com ports".
Other phones can see my phone but can not pair with it.
Change tO FXP 126
I migrate to FXP 126, but the problem persists... please someone help.
SLASH32 said:
I migrate to FXP 126, but the problem persists... please someone help.
Click to expand...
Click to collapse
Try to pair other Bluetooth Device with PC/Phone it will clear where is the Issue
If PC Issue
Uninstall PC Bluetooth Suite than Re-install it.
Phone Issue
You may re-flash Bluetooth Module
Hit Thanks if it helps
Evening all I'm hoping someone here might be able to help me sort this little problem I have here. I am trying to pair my phone to my pc which has a small Bluetooth dongle installed in it.
I have windows 7 on the pc and Omega v45 ( 4.2.2 ) yet everytime I try to connect I get various problems. When windowz detects the phone it comes up with an issue locating a driver and just shows Bluetooth peripheral Device driver unknown, ie it can't find it.
I am wanting to run the EVGA Precision app ( https://play.google.com/store/apps/...lt#?t=W251bGwsMSwyLDEsImV2Z2EucHJlY2lzaW9uIl0.) and run that from my phone but no matter what I try I can't get my phone and PC to talk to each other.
Has anyone else had this issue and been able to fix it please.
Hey mate,
does other devices can connect properly to your PC ?
which BT provider do you use ?
eytan123 said:
Hey mate,
does other devices can connect properly to your PC ?
which BT provider do you use ?
Click to expand...
Click to collapse
Everything else works fine i just can't get the bluetooth to sync from the phone to the PC
buy the tablet from china and everything was ok except for the bluetooth, it seems that is unable to connect with any bluetooth device that have more current connection than 2.0, i tried with a TSW of 5.0, also 3 different headphones with 4.0 and a keyboard with 3.0, the only thing that was able to connect was a silly BT speaker with mushroom figure of 5$ and of course BT 2.0, lenovo support tells me it must be a compatibility issue (of course of lots of devices that i can use on my phone or a keyborard maded for the specific model). So i though is a matter of the MAC address of the bluetooth (WLAN MAC is correct), the MAC address of BT is marked as 00:00:00:00:00
I already tried to reboot the WLAN and bluetooth connection, also already made the factory reset, the las thing that i tried is to install the original first ROM unfortunally my PC won´t let me change it with QFIL due a sahara fail (already tried updating the qualcomm drivers, erase it, use the ones from the tablet, changing the version of the QFIL, changing the root of the rom version to the C:/ or to the QFIL folder) but it seems like my PC is just not going to work for it.
Sorry for bother you guys, but i´m out of ideas for fix it, do you have any kind of suggestion or something that you used for fix an issue of BT address? thanks T_T
Have you rooted your device and the stock rom has been replaced?
That BT mac address is obviously invalid. I think the BT issue must result from the current rom.
James_Watson said:
Have you rooted your device and the stock rom has been replaced?
That BT mac address is obviously invalid. I think the BT issue must result from the current rom.
Click to expand...
Click to collapse
mmm no yet, i don´t know what kind of rom i can use for replace it, do you have any recomendation?
already fix it, bluetooth MAC address still on 00:00:00:00:00 but now it can connect to any device, i just install with QPST process the ROM TB-J606F_CN_WIFI_USER_Q00016.0_Q_ZUI_12.0.519_ST_210130 that is a chinese ROM but it can make the BT work even with that address, if your device have the same issue it´s possible that an original rom from the device country can make it work, even with that it´s BT address 00:00:00:00:00 can be a factory issue and if you can´t make the BT work is possible that needs to go to warranty or change the wireless connection chip on the motherboard