I have installed an cyanogem 9 Fx 125, and i can't pair my phone with another devices(notebook, cellphone), someone can help me?
In my device name is displayed how "bluez", another devices no conect with me too...
What to do, to fix this issue?
My phone model: Xperia Neo
P.S:Translated by Google Tradutor
make sure your device is "discoverable"
zmbutt said:
make sure your device is "discoverable"
Click to expand...
Click to collapse
I tried the notebook and on some phones, but when they are unable to pair.
My cell phone appears like a wireless hd, named "Bluez", no one can pair with it.
News
Now my laptop found and add my phone in Bluetooth devices, but the bluetooth operations don't work(audio, serial com ports, etc) i receive this message from windows: "This device don't' support com ports".
Other phones can see my phone but can not pair with it.
Change tO FXP 126
I migrate to FXP 126, but the problem persists... please someone help.
SLASH32 said:
I migrate to FXP 126, but the problem persists... please someone help.
Click to expand...
Click to collapse
Try to pair other Bluetooth Device with PC/Phone it will clear where is the Issue
If PC Issue
Uninstall PC Bluetooth Suite than Re-install it.
Phone Issue
You may re-flash Bluetooth Module
Hit Thanks if it helps
Related
Please me fix my Bluetooth...
I cannot see the percentage when beaming a file over BT.
Also Device fails after having succesfully paired up with other device and loses connection ...
Thank you
what other bluetooth device are you pairing with? is the problem consistent when pairing with other devices? most of the problems on bluetooth that i've had were from the hardware that i usd in my pc. mostly due to the driver being used.
palmmanpalm said:
what other bluetooth device are you pairing with? is the problem consistent when pairing with other devices? most of the problems on bluetooth that i've had were from the hardware that i usd in my pc. mostly due to the driver being used.
Click to expand...
Click to collapse
Up to I have tried ... Motorola KrZRed, HTC Touch , Sony Ericsson Z710i.
....
Doesn;t establish connection even after sucessful pairing...
Doesn't show Progress bar...
What rom you using? This can effect bluetooth sometimes..Cheers...
ultramag69 said:
What rom you using? This can effect bluetooth sometimes..Cheers...
Click to expand...
Click to collapse
ROM version : CRCs PHKv12r9
ROM Date : 11/06/07
Radio version : 1.16.00.00
Protocol Version : 32.53.7018.01H
I have installed Resco Explorer and this does help when I Transfer/Beam a file to someone.
When I receive a beam/BT connection it doesn't show a Progress Bar.
Also eventhough this works ... I lose connection and have to pair device over and over again ... Very Frustrating ... Is there a Fix ?
Hi dear,
I have TG01 WM 6.5 and I'm trying to use headset WH-203 that came with the set. Once I connect it to TG01 the following massage appears:
(Unidentified USB Device
Enter the name of the device driver for this device. For information, see the device manufacturer's documentation.)
Note that this headset came with the set, so for sure it is compatible.
Do you have any idea to solve this problem?
try to hard reset the device
I did, but the poplem still exists.
any other idea.
HDSSWDN said:
Hi dear,
I have TG01 WM 6.5 and I'm trying to use headset WH-203 that came with the set. Once I connect it to TG01 the following massage appears:
(Unidentified USB Device
Enter the name of the device driver for this device. For information, see the device manufacturer's documentation.)
Note that this headset came with the set, so for sure it is compatible.
Do you have any idea to solve this problem?
Click to expand...
Click to collapse
Try
Go to Start > Settings > Connections > USB to PC. Check or uncheck Advanced network functionality. Now try to connect.
If this don't solve the issue, hard reset.
If that don't solve the issue, you have missing drivers which sounds very odd, as I use this USB cable all the time to connect my usb to it and never had any problems!
Still
In fact, I tried hard reset, and I tried using the headset befor restoring my data from the backup, but the same massage appears.
I think there should be a driver associated with it which is not available.
Any one knows?
Thank you
HDSSWDN said:
In fact, I tried hard reset, and I tried using the headset befor restoring my data from the backup, but the same massage appears.
I think there should be a driver associated with it which is not available.
Any one knows?
Thank you
Click to expand...
Click to collapse
When you connect to ActiveSync doesn't it automatically download drivers? :s Did you install Windows Device/Mobile Center using the CD that comes with the box? It generally downloads all your drivers on connection (or so I presume!)
Hi since today when i connect my phone to the USB Cable it's only charging, i don't see USB mode... Did someone have same problem, i looking for solution pls
Can someone tell me in settings>wireless and network do you have USB Settings?
Lenks said:
Can someone tell me in settings>wireless and network do you have USB Settings?
Click to expand...
Click to collapse
Hey!
Nope!
CHEERS!
Lenks said:
Hi since today when i connect my phone to the USB Cable it's only charging, i don't see USB mode... Did someone have same problem, i looking for solution pls
Click to expand...
Click to collapse
Do you have Samsung Kies ?
Sent from my Awesome Ace with fla.sh ROM and TAPATALK
I have KIES, i try on my PC, and on my Laptop. Reinstall KIES and drivers, nothing help. I read on google and i think is a cable problem, (same problem whit other android phones, like HTC) i purchase new one but will came after few weeks, so i need to wait If anyone have problem like this, or have any idea please share...
Typ *#7284# in your dialer.
And set both to pda.
Worked for my galaxy 3!
i think it came different menu... if someone hace other code...
The menu is named: phoneutil
It open "ServiceMode", if someone know proper code for "PhoneUtil" let share
Lenks said:
Hi since today when i connect my phone to the USB Cable it's only charging, i don't see USB mode... Did someone have same problem, i looking for solution pls
Click to expand...
Click to collapse
I have the same problem, it suddenly stopped working without any change in the environment or phone.
Does someone have a solution for this problem?
Thanks!
i had the same problem. I took a backup of the rom with cwm and restored it and it was working fine, dunno how
Guys you need the Samsung usb drivers ....only then ur pc will recognise the phone ...just google "android 2.3.4 for Samsung galaxy ace androidflip.com ..they share the drivers in the tutorial ...hope I helped ...
Sent from my SGA rocking CM7.2 by vo-1 + all-in-one script
Lenks said:
It open "ServiceMode", if someone know proper code for "PhoneUtil" let share
Click to expand...
Click to collapse
*#*#4986*2650468#*#* PDA, Phone, Hardware, RF Call Date firmware info
*#*#1234#*#* PDA and Phone firmware info
async3 said:
I have the same problem, it suddenly stopped working without any change in the environment or phone.
Does someone have a solution for this problem?
Thanks!
Click to expand...
Click to collapse
Ok, It got solved yesterday this way:
You do not need to reinstall drivers on PC.
You do not need to reinstall ROM or anything on your phone.
You do not need *# special codes.
You do not need a new cable or change USB port or change your phone for a new one.
It seems to me that somehow (probably for debugging, connecting and disconnecting several times) the phone locks itself in a state where it is unable to connect again through USB although it charges.
So how did I solve it? I executed this actions several times even in different order some times: disabled debugging, disconnected cable, restarted phone, connected cable, (still not recognizing), tryed to USB Theter (even when the option was disabled), reenable debugging.
Out of nothing i noticed the USB icon was there again in my phone and i was able to debug copy files etc again.
I tried disconnecting and conneceting again and it kept working correctly.
I hope this helps someone else with the same problem and probably someone fixes the bug on the OS.
Cheers!
Evening all I'm hoping someone here might be able to help me sort this little problem I have here. I am trying to pair my phone to my pc which has a small Bluetooth dongle installed in it.
I have windows 7 on the pc and Omega v45 ( 4.2.2 ) yet everytime I try to connect I get various problems. When windowz detects the phone it comes up with an issue locating a driver and just shows Bluetooth peripheral Device driver unknown, ie it can't find it.
I am wanting to run the EVGA Precision app ( https://play.google.com/store/apps/...lt#?t=W251bGwsMSwyLDEsImV2Z2EucHJlY2lzaW9uIl0.) and run that from my phone but no matter what I try I can't get my phone and PC to talk to each other.
Has anyone else had this issue and been able to fix it please.
Hey mate,
does other devices can connect properly to your PC ?
which BT provider do you use ?
eytan123 said:
Hey mate,
does other devices can connect properly to your PC ?
which BT provider do you use ?
Click to expand...
Click to collapse
Everything else works fine i just can't get the bluetooth to sync from the phone to the PC
buy the tablet from china and everything was ok except for the bluetooth, it seems that is unable to connect with any bluetooth device that have more current connection than 2.0, i tried with a TSW of 5.0, also 3 different headphones with 4.0 and a keyboard with 3.0, the only thing that was able to connect was a silly BT speaker with mushroom figure of 5$ and of course BT 2.0, lenovo support tells me it must be a compatibility issue (of course of lots of devices that i can use on my phone or a keyborard maded for the specific model). So i though is a matter of the MAC address of the bluetooth (WLAN MAC is correct), the MAC address of BT is marked as 00:00:00:00:00
I already tried to reboot the WLAN and bluetooth connection, also already made the factory reset, the las thing that i tried is to install the original first ROM unfortunally my PC won´t let me change it with QFIL due a sahara fail (already tried updating the qualcomm drivers, erase it, use the ones from the tablet, changing the version of the QFIL, changing the root of the rom version to the C:/ or to the QFIL folder) but it seems like my PC is just not going to work for it.
Sorry for bother you guys, but i´m out of ideas for fix it, do you have any kind of suggestion or something that you used for fix an issue of BT address? thanks T_T
Have you rooted your device and the stock rom has been replaced?
That BT mac address is obviously invalid. I think the BT issue must result from the current rom.
James_Watson said:
Have you rooted your device and the stock rom has been replaced?
That BT mac address is obviously invalid. I think the BT issue must result from the current rom.
Click to expand...
Click to collapse
mmm no yet, i don´t know what kind of rom i can use for replace it, do you have any recomendation?
already fix it, bluetooth MAC address still on 00:00:00:00:00 but now it can connect to any device, i just install with QPST process the ROM TB-J606F_CN_WIFI_USER_Q00016.0_Q_ZUI_12.0.519_ST_210130 that is a chinese ROM but it can make the BT work even with that address, if your device have the same issue it´s possible that an original rom from the device country can make it work, even with that it´s BT address 00:00:00:00:00 can be a factory issue and if you can´t make the BT work is possible that needs to go to warranty or change the wireless connection chip on the motherboard