Searched and did not find this in the Vibrant forum.
My Vibrant suddenly will not mount. I have it set to MASS STORAGE as it always has been, and now it won't bring up the USB notification on the phone and I get a USB Device not recognized error in Windows XP and Windows 7.
The phone is NOT rooted. I flashed JI2 with ODIN. I know it worked after that because I copied back my music movies and games back to the Vibrant from pc's running XP and 7.
Any ideas?
I had that happen to me, too, after I had soft-bricked my phone and then tried to use Odin to recover. I ended up getting the phone back through Clockwork Recovery, but by then it had stopped being recognized in Windows. Try re-installing the drivers (available here http://forum.xda-developers.com/showthread.php?t=728929). That fixed the problem for me.
Tried those, don't work for me. Not sure what the heck is going on. Finally get the phone working nicely with the JI2 update and now this...sheesh.
Any other suggestions?? I confirmed that it's not a driver issue, I tried my coworkers vibrant on my PC and his and it mounts fine. When I connect mine, same old error. I even did a factory reset, same results.
I have the exact same problem.. my vibrant soft bricked, so I reflashed stock rom with ODIN and it seemed to be fine.. then after a while it just stopped being recognized on my computer. Tried both on mine and my husband's. It's not the drivers, I've installed and reinstalled. There doesn't seem to be any fix for this??
sorry to bump an old thread but was there ever a solution for this?
Same happend to me today . I nandroid back to a point it was working and did not help . I read somewhere that formatting the drives help some but im not sure I want to lose all my **** .
AgentFour20 said:
Same happend to me today . I nandroid back to a point it was working and did not help . I read somewhere that formatting the drives help some but im not sure I want to lose all my **** .
Click to expand...
Click to collapse
I don't know if it's the drivers. I think it has something to do with Odin. I softbricked my vibrant twice and had to use Eugene's Froyo that won't brick then back to 2.1 and finally a custom rom. I think somewhere in there something happened...
I havent used odin lately . It was working fine then it just stoped working . I got the drives to show up but it window say "One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it" .
Couple of things you can try:
1) Try setting the USB mode to Samsung Kies. Somehow, mass storage never worked for me, but Kies mode works just fine.
2) Try installing ES File Explorer from the market. With that you can get into a home network while on WiFi, thus allowing you to transfer data between your computer and phone using your WiFi network, thereby eliminating the need for cables.
So far I've done a few things and i still get "USB device not recognized" .
Here's what I've done .
1) reinstalled drivers
2) formatted internal and external
3) restored to a previous nandroid
guruchimi said:
Couple of things you can try:
1) Try setting the USB mode to Samsung Kies. Somehow, mass storage never worked for me, but Kies mode works just fine.
2) Try installing ES File Explorer from the market. With that you can get into a home network while on WiFi, thus allowing you to transfer data between your computer and phone using your WiFi network, thereby eliminating the need for cables.
Click to expand...
Click to collapse
It is recognized when switched to kies but the drive int/ex still dont show up . I was going to odin to stock but odin does see it . Im probly going to download a the stk nandroid and exchange it .
sorry, I have to bump this up in hopes of the night crowd having an idea. Seriously wtf...
help please
heeeeeeelp
Is it recognized in any other computer ?
Sent from my SGH-T959 using XDA App
Mine is not recognized by any computer, by odin or kies at all. This happened after I flashed a rom using odin fixing a soft brick. I don't know if it is a hardware problem or not, I have flashed to different roms using rom manager and usb is still not being recognized.
Sent from my SGH-T959 using XDA App
Related
My computer wont recognize my phone at all, it just says 'USB device not recognized'. I have tried reinstalling drivers, using different USB cables, USB debugging mode, mass storage mode and mounting the SD card ALL of that.. so I know it's something wrong with the phone rather than my drivers or me being stupid. I have searched to try and find a fix for this but nothing is forthcoming.. I think it may be a faulty USB port on my phone.
Anyway, this means I can't use ODIN to flash my phone back to stock so what I want to do is flash my phone back to stock T959UVJI6 using a zip file and ROM manager if possible.. but I have looked everywhere and can't find a zip for stock ROM... Every method I've seen says to use ODIN which is impossible for me.
Any help on this or a link to where I can download a stock ROM zip would be appreciated.
ok I managed to flash Bionix Fusion 1.2 which is ok, seems to be running fine. I still can't connect to my computer though I guess I will have to get the USB port checked out.
Sounds like an issue on the PC side if it recognized the phone was connected. You sure you got the drivers... are you using the cable that came with the phone? Sounds crazy, but i had issues using my nexus one cable one time.
I tried with the cable that came with my phone and also my husband's micro usb cable.. I downloaded the drivers from the link given in the XDA forums, tried to restore drivers from KIES, downloaded drivers from other spots too.. none of them work. I also tried to connect to my husband's PC and it said 'USB device not recognized' as well. I noticed a couple of other posts where this has happened to people and there seems to be no software/using different cable solution.. I am guessing I'll just have to get the phone looked at as I'm not savvy enough to go about it myself! Thanks for the advice though
Here is the stock JK6
http://forum.xda-developers.com/showthread.php?t=857974
Thank you, I will flash this one when I get home
i have tried to flash a overclock kernal over cm9 via mobile odin my phone went strait into bootloop and wont go past the samsung s2 logo. it still goes into recovery and download but cwm has gone its on stock 3e?? i wiped everything and tried to reboot with no luck so now i found a thread to unbrick but i cant connect my phone to my laptop. says drivers not installed properly. having trouble just getting to recognize my phone. so i cant flash anything via odin because it just wont recognize please help its doing my nut it. its not even my phone either its the misses. haha she'll kill me now. i blinging a brand new gnote ;p
I changed the USB cable and it sorted my problems. Needs to be official Samsung cable.
Sent from my GT-I9100 using xda premium
KevandLynds said:
I changed the USB cable and it sorted my problems. Needs to be official Samsung cable.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Not actually true. It just needs to be a working micro USB cable. I use a generic micro USB cable (originally for a BlackBerry, I think) for all my flashing. Works fine.
this doesnt work guys, iv tried 3 different usb cables. nothing is happening it just wont connect. is it a way of installing a usb driver for my phone so it will reckonise my phone??
please help some one need help
But you try reboot into download mode before connect to your pc?
vol- + menu + power off
blackgf said:
But you try reboot into download mode before connect to your pc?
vol- + menu + power off
Click to expand...
Click to collapse
Yes i tried all that with no luck i just cant get my phone connected to my laptoo if i could I
could unbrick
Check for Windoze updates if you're unable to get your PC & phone to recognise each other after trying the obvious (different USB ports, different cables, different versions of Odin, making sure Kies/its processes aren't running in Task Manager on PC. Try *all* of these).
This has solved the issue for a few people over the last week or so. Failing that, uninstall Kies from your PC, reboot, redownload it, reinstall it, reboot & try again.
If that doesn't work, try a different PC.
Bratcher123 said:
i have tried to flash a overclock kernal over cm9 via mobile odin my phone went strait into bootloop and wont go past the samsung s2 logo. it still goes into recovery and download but cwm has gone its on stock 3e?? i wiped everything and tried to reboot with no luck so now i found a thread to unbrick but i cant connect my phone to my laptop. says drivers not installed properly. having trouble just getting to recognize my phone. so i cant flash anything via odin because it just wont recognize please help its doing my nut it. its not even my phone either its the misses. haha she'll kill me now. i blinging a brand new gnote ;p
Click to expand...
Click to collapse
This method not required to connect your mobile to PC.
Just need external sdcard and ics based recovery
If you are ics recovery version , we can come from this issue.
1, download any ics ROM ( stock based ) and copy to your external sdcard.
2, root the mobile using this way
http://forum.xda-developers.com/showthread.php?t=1501719
[GUIDE] ROOT/UNROOT Stock ICS Firmware without flashing unsecure kernel
3, as per the above guide once you flashed cwm.zip , you will get cwm based recovery screen.
4, wipe system and cache
5, install the custom ROM from external sdcard
I believe this method will work for you.
All the best
Sent from my GT-I9100 using XDA
sendhiloo7 said:
I believe this method will work for you.
Click to expand...
Click to collapse
I believe it won't since he bricked his device and can't even start the phone.
Do what MistahBungle said + make sure that you install Kies first so that you have the proper drivers for Odin.
i have tried this methed. copied all the files on to the sd card, inserted back into the phone put into recovery but would not read external sd card only internal comes up????
That's nice.
Now have you tried the other suggestions that have been made ? If your phone & PC can't/won't recognise each other, you need to fix that first. Forget about CW not working. It's not relevant. You're not going to fix this without an Odin flash and making that happen should be your focus/priority.
Bratcher123 said:
i have tried this methed. copied all the files on to the sd card, inserted back into the phone put into recovery but would not read external sd card only internal comes up????
Click to expand...
Click to collapse
I'm having the same issue today, i flashed the siyah kernel beta and now recovery doesn't work and phone stays on Samsung logo.
I can get into download mode but pc says unrecognised device . It was working fine a few days earlier.
Unfortunately my Samsung USB cable appears to have vanished too but I don't see why my other cable shouldn't work as long as it supports data? Maybe the cable is the issue though??
Might be. Try the (many) suggestions on the first page. Any one of those could be/resolve the problem. In addition to those suggestions, you can also try uninstalling Kies on your PC, rebooting, re-downloading it, reinstalling it, rebooting & then seeing if your PC & phone recognise each other.
But definitely try those other suggestions first.
crunchie-uk said:
I'm having the same issue today, i flashed the siyah kernel beta and now recovery doesn't work and phone stays on Samsung logo.
I can get into download mode but pc says unrecognised device . It was working fine a few days earlier.
Unfortunately my Samsung USB cable appears to have vanished too but I don't see why my other cable shouldn't work as long as it supports data? Maybe the cable is the issue though??
Click to expand...
Click to collapse
This is definitely NOT a cable issue. I have the same problem, and i too was using Siyah. It's something with the kernel.
trell959 said:
This is definitely NOT a cable issue. I have the same problem, and i too was using Siyah. It's something with the kernel.
Click to expand...
Click to collapse
I use Siyah, and have no such problems.
crunchie-uk said:
I'm having the same issue today, i flashed the siyah kernel beta and now recovery doesn't work and phone stays on Samsung logo.
I can get into download mode but pc says unrecognised device . It was working fine a few days earlier.
Unfortunately my Samsung USB cable appears to have vanished too but I don't see why my other cable shouldn't work as long as it supports data? Maybe the cable is the issue though??
Click to expand...
Click to collapse
OK have had this problem, CWM is gone bye bye - bootloop, download recovery mode possible on phone but can't connect using Odin. Right??
See this thread
http://forum.xda-developers.com/showthread.php?t=1449771
You will need all the files, make sure Keis is not messing with Odin so check to make sure it's not running on the PC.
Have had this happen to me - keep the files safe and you will fix pretty much any brick u manage to do. Mine was in CM9 - dropped and battery fell out had to do the full repair job to fix.
grungysquash said:
OK have had this problem, CWM is gone bye bye - bootloop, download recovery mode possible on phone but can't connect using Odin. Right??
See this thread
http://forum.xda-developers.com/showthread.php?t=1449771
You will need all the files, make sure Keis is not messing with Odin so check to make sure it's not running on the PC.
Have had this happen to me - keep the files safe and you will fix pretty much any brick u manage to do. Mine was in CM9 - dropped and battery fell out had to do the full repair job to fix.
Click to expand...
Click to collapse
That doesnt help as Odin doesnt recognise the phone in Download mode.
crunchie-uk said:
That doesnt help as Odin doesnt recognise the phone in Download mode.
Click to expand...
Click to collapse
+1 10char.....
If you have a memory card slot in your laptop, couldn't you take it out of your phone, put it in laptop. Download stock 2.3.5 firmware put it Back in then reboot into recovery and flash? Just an idea. Hope you find a solution soon!
Sent from my GT-I9100 using XDA Premium HD app
AntAust1513 said:
If you have a memory card slot in your laptop, couldn't you take it out of your phone, put it in laptop. Download stock 2.3.5 firmware put it Back in then reboot into recovery and flash? Just an idea. Hope you find a solution soon!
Sent from my GT-I9100 using XDA Premium HD app
Click to expand...
Click to collapse
Well I thought of that, but none of us can get into recovery at all.
Sent from my SGH-I897 using XDA
Ok, please, anyone, help me!
I've rooted my phone, using a zerg method ive seen on galaxys2root.com, at first everything worked brilliantly, customs roms and all, but the phone usb drivers are gone.
no pc or mac ive tried can detect my phone, i cant move any files (unless i do it over wi-fi), i cant select usb debug mode, it say cable is connected even when there is no cable connected, ive tried many methods to connect the phone but none work.
so now i cant use odin to flash anything since my phone is always being detected as an unknown device.
im desperate, i dont know what to do.
so please anyone help me out there ... i guess all i can offer for help is a 10$ steam game to whoever finds a solutiin
im not quite sure whats wrong with your usb but you can try mobile odin to flash.
The are 2 things that I Would try, try this first:
Download the CWM version of "Siyah kernel" (v3 is best)
Here is a link
http://www.gokhanmoral.com/gm/2012/05/10/siyahkernel-v3-2-1/
Flash it in to CWM recovery (if you need instructions on how to flash in to CWM let me know) (to enter cwm recovery do the following:
Turn phone off
Press the home+ volume up+ power button, and do not release your fingers off the buttons till you see the sgs2 boot logo)
If your phone still doesn't work properly after the above, do the following:
Find a CWM flasherble rom (any will do as you are only flashing it so as to be able to use Odin for what ever rom it is you want to install, although you can also find a nice rom that is cwm flasherble, pure ics v7. 3 is very nice!) and download it from your phone
Make titanium backup of all your apps
Go in to CWM recovery and select "install zip from sd card"
Click "yes"
And hopefully when that has finished it should have fixed the issue you are having, and then you can install the rom you were on originally or a rom that you like.
Hope this helped
Cheers
corey
Sent from my GT-I9100 using xda premium
Probable not following instruction like
Question in wrong forum
Clean Slate for those that balls up the firmware .Or need to return to service or decide if its hardware/firmware problem .
Backup data first if phone is working .
Boot CWM recovery
Mounts and Storage
Format cache data system sd card .
Remove battery
Boot to download mode
Open Odin
Install correct stock firmware .
jje
Well, thanks for the reply guys but still not working, its driving me nuts, no pc can pick up my phone, its only being seen as unknown device, ODIN cant see my phone when its in download mode.
i installed that room, ICS resurrection remix, the problem managed to find its away to that also.
EDIT: Sorry about posting in the wrong forum.
Stuff to try when Odin doesn't work:-
*Must run Odin as administrator in Windoze.
*Ensure Kies & it's processes aren't running in Windoze task manager. Kill them if they are.
*Try different USB ports; you must be using a 'powered' or mainboard port.
*Try different USB cables (particularly the cable that came with the phone if you're not using it now)
*Try different versions of Odin (search on here/Google).
*Uninstall Kies, reboot, redownload & reinstall it, reboot, try the flash again.
*Check the rom/kernel you download for corruption. Programs like 7Zip, IZarc, WinRar, etc will allow you to 'test' the rom file you download. If there are any errors/any of the files fail the test, bad download. Try again/try downloading with a different internet connection if it keeps happening.
*Run Windoze Update.
Try all of these steps if necessary.
And if all this fails, try a different PC. And if the different PC doesn't work first try, go thru all the above steps on the different PC if necessary.
And if you still don't have any joy, probably user error somewhere along the line or a hardware issue.
I'm sure its a user error, cause the phone realizes that usb is connected when i connect. but no other device can recognize the phone (i tried 2 windows pc's and one os x machine).
I'm not an expert but is it possible that the phone information got deleted?
maxneo said:
I'm sure its a user error, cause the phone realizes that usb is connected when i connect. but no other device can recognize the phone (i tried 2 windows pc's and one os x machine).
I'm not an expert but is it possible that the phone information got deleted?
Click to expand...
Click to collapse
Yes if Kies is not installed no USB drivers .
Also clean USB port on the phone .
Getting a lot of i used that xxx site and rooted or flashed now broke help asked from here without knowing what the original site asked you to do or firmware used .It becomes hard to guess what's wrong .
jje
Did you o a factory reset, and full wipe before you installed the rom?
Sent from my GT-I9100 using xda premium
Ok, Kies is installed with drivers, everything was working fine, then i used a Zerg method i found on galaxys2root.com to root the phone, after that it all went to hell.
Well, for the heck of it, i install MIUI, and usb mount is still not working, this is driving me nuts!
Did you make sure you did a full wipe of the phone before you installed the rom?.
And have you tried flashing siyah v3.2?
Flash the kernel and tell me how you get on.
Cheers corey
Sent from my GT-I9100 using xda premium
i made a full swipe, well ill flash siyah with miui now, just a sec mate, and really, thanks for replying everyone.
fishingfon, i installed Siyah, rebooted the phone, the pc picked it up and opened the autoplay, then it declared it as unkown device and back to square one.
everytime i reboot the phone, the pc sees it for a few secs now then unknown device... i THINK that we're on to something o.o
Have you tried using another usb cable? As if it is broken that would explain the problems you are having. Abd have you tried it of a different pc?
And if you have an external sd card in the phone, try removing it And then rebooting.
Cheers corey
Sent from my GT-I9100 using xda premium
And make sure you "uncheck" the "usb debugging" in developer options,I dont know why but I have often not been able to connect my phone to the pc if the above is kept checked.
Cheers corey
Sent from my GT-I9100 using xda premium
Same thing, could be an appilcation conflict on the phone ? when i reboot the window show and then goes, maybe the phone is a loading an app which screws up with the USB?
Have you tried the above?.
Have you tried enabling usb mass storage?.
I dint think it would be an app, as they are apps that people use all the time.
Did you make sure you used the currect root method for your model?
Did you make sure your phone was either a I9100 or and I9100T model before before tou rooted. If it was the wring model rhat might explain your problems, what model is your phone?
If none of the above works the only thing I can think of is that the phones hardware is broken.
Sent from my GT-I9100 using xda premium
If you remove the backplate off the phone, and remove the battery, rhe should be a label with the model on it
Sent from my GT-I9100 using xda premium
You could try downloading Mobile Odin Pro from Google Play. Then go to Samfirmware.com and download your original firmware that came with the phone,( NOT A CUSTOM ROM). Put the firmware on the root directory of your sd card. Run Mobile Odin and install the firmware.
Sent from my I9100P using Tapatalk 2
Hello all, I have a GS3 international GT-I9300
I'll try to go through the story as fast as I can and give as much detail so you guys can understand how I got here.
Bought the phone unlocked, I was stock, I rooted and then I decided to install a new ROM. I went with Resurrection Remix, it was working great. I did this on a desktop back home. They released a new update to RR so I did a OTA update with "Update Me" apparently the thing flashed but it didn't, the phone still worked but NFC wasn't working as well as having lost root access and some other stuff wasn't working correctly, but I lived with it.
I moved to Florida (home is in NY) and I have a laptop with me, for some reason my laptop used to be able to transfer files to my S3, but it wasn't doing it any more after a while. So it would just charge it. I was in a hotel room last week trying to tether via USB but the PC wasnt having it, it could not locate the phone. This week I moved to a different hotel with internet and decided I would flash stock on my S3 to get rid of all these bugs and get root again, I tried flashing stock through recovery and it wasn't going, so I tried flashing RR again (this time downloaded from the site RR site) and it worked. Still no USB connection but I had root back. I looked around my PC and apparently the Samsung drives are not installing or something on my PC. I installed Kies, but nothing, I tried a stand alone driver install and nothing, so I just gave up and bought Mobile Odin pro from Gplay to try to flash again.
Mobile Odin for some reason (I blame it on myself) wasn't finding/flashing stock so again I decided to try and flash RR and see what would happen. It flashed RR and turned on fine. Then I just decided to look for an NFC fix on XDA. Once I found my NFC fix (http://forum.xda-developers.com/showpost.php?p=32029713&postcount=8367) I decided to just copy the files to the system folder, NFC still not working, rebooted and NFC still no working, so I figured I would try to flash the fix through mobile odin seeing as how I can't get my PC to pick up on the USB. I tried flashing but MO just kept bouncing it back and re-booting into RR. Tried again and no flash. So I decided to again try and flash stock. I tried going into Recovery, the phone shut off like it always does, came back on but stayed in the Galaxy S3 GT-I9300 logo and would not move. I shut it off again, tried turning it on again and still stuck on the galaxy logo. Now, if I leave the phone off and plug in the USB, it won't show the battery charging image, it will actually turn straight onto the galaxy logo again and stay there. I can get the phone into download mode, but like I said my pc won't recognize the drivers.
Now, here are my questions:
What happened?
Can this be fixed?
Am I an idiot?
If I can get the drivers installed on another PC as well as Odin (1.85), will the new PC "see" the S3 or are the drivers on the phone deleted as well? (if that sort of thing can happen, idk.)
I'm going to see if I can borrow a buddy's PC and download the drivers as well as odin to try and bring my S3 back to life, I just want to know, what happens if I can't get the other PC to pick it up ether because the drivers on the phone are deleted (if that's a thing) or what I can expect if it is connected.
What are the steps or guides to follow here? I just got it into Download mode and it says on the top of the screen:
ODIN MODE
Product name: GT-I9300
Custom Binary Download: Yes (2 counts)
Current Binary: Custom
System Status: Custom
sorry , i am sometime getting headache reading long english text so i just briefly look over.
your PC doesn't recognize your S3 ? is that correct ? hmmm , is it possible that your PC (Microsoft Windows I assume?) system is damaged due to something like virus or some reasons ? i have encountered that kinda problem before and be OK after i reinstalled the system.
If it's a soft brick, then it can defiantly be fixed. You might, however, lose your data along the process.
Be glad it's not hard bricked
It happened to me many times, USB error "unknown device" connected. Only fix for it was reinstalling Windows so better if you can use different PC or laptop. Install Kies and other USB drivers. Restart computer, download and run Odin v 3.0x. Flash your phone.
If this doesn't work then maybe your phone have a problem with USB port?
Sent from my GT-I9305 using xda app-developers app
djembey said:
It happened to me many times, USB error "unknown device" connected. Only fix for it was reinstalling Windows so better if you can use different PC or laptop. Install Kies and other USB drivers. Restart computer, download and run Odin v 3.0x. Flash your phone.
If this doesn't work then maybe your phone have a problem with USB port?
Sent from my GT-I9305 using xda app-developers app
Click to expand...
Click to collapse
Don't forget to delete kies as you only need the drivers
Sent from my GT-I9300 using Tapatalk 2
Thanks for the replies guys. I'll try to fix tit today, I didn't get a chance to do it last night. If anything I'll update you guys with what's going on.
Like I was saying, I'll try using a different PC to fix it. Now, if I can't get Odin to recognize the phone, what would be the next step?
I have an unrooted Samsung S3, i just received yesterday the notification of the jelly bean 4.3 update (originally ran on 4.1.2) so i went for it OTA via wifi, long story short, after download was finished and the phone automatically rebooted itself, it got stuck on samsung logo, i have waited for hours beside it (since i have modest experience about this) and finally nothing happened, so i started researching the issue, i have tried wipe data/factory resetting (didn't work) along with wipe cache partition, and no use, i have tried kies emergency firmware upgrade and initialization, but it can't see the phone in Download mode, i tried flashing the phone with Odin307 but it also cannot see my phone in Download mode, and i have heard that if the phones usb debugging was active, the phone would be seen, but i never used it, my phone was stock all the way, please help me get my phone working again.
Make sure kies is completely shut down and retry. You could also try reinstalling driver's and Odin and different USB lead or different PC/laptop
please check in device manager if you can see your device , try reinstalling the device drivers, try different cable or it could be charging port .. Good luck ..
andrewwright said:
Make sure kies is completely shut down and retry. You could also try reinstalling driver's and Odin and different USB lead or different PC/laptop
Click to expand...
Click to collapse
actually i have done all of that, i ran odin while kies was completely shut down (killed all kies from task manager) and downloaded latest drivers from samsung and installed them, tried 3 different wires on 2 different PCS, still my phone cannot be seen inside odin or kies
that is why i'm frustrated
is it possible to use the option "apply update from external storage" from system recovery menu? since my phone cannot be seen by any software, and if possible to use that option, what are the files that i should add to my MicroSD Card? and from where should i download them?
In download mode is the product name blank?
Sent from my GT-I9300 using Tapatalk
herculese911 said:
actually i have done all of that, i ran odin while kies was completely shut down (killed all kies from task manager) and downloaded latest drivers from samsung and installed them, tried 3 different wires on 2 different PCS, still my phone cannot be seen inside odin or kies
that is why i'm frustrated
is it possible to use the option "apply update from external storage" from system recovery menu? since my phone cannot be seen by any software, and if possible to use that option, what are the files that i should add to my MicroSD Card? and from where should i download them?
Click to expand...
Click to collapse
i guess problem is in charging port than , try fixing charging port , have you checked if you can see your device in device manager ???
Brownpanda said:
i guess problem is in charging port than , try fixing charging port , have you checked if you can see your device in device manager ???
Click to expand...
Click to collapse
before the update, the charging port worked just fine, the phone was recognized in windows in device manager, and inside KIES, now both of them can't see it, so how could it be faulty?
and for the record guys, i'm not lazy, i never post a thread until i have exhausted all other researching methods
boomboomer said:
In download mode is the product name blank?
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
no its not, showing GT-I9300
In that case try a different pc, lead, version of odin. Either your problem is with the pc (most common) or your bootloader is corrupt, which is very unusual and difficult to fix.
Sent from my GT-I9300 using Tapatalk
Try ODIN v1.85. It always worked fine for me, other versions don't.
Here is a compatibility list for what is worth it.
Brownpanda said:
please check in device manager if you can see your device , try reinstalling the device drivers, try different cable or it could be charging port .. Good luck ..
Click to expand...
Click to collapse
Can you get into recovery still??
boomboomer said:
In that case try a different pc, lead, version of odin. Either your problem is with the pc (most common) or your bootloader is corrupt, which is very unusual and difficult to fix.
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
Thank you so much for your suggestions, but actually none of the above, i have done the fix that i was asking about (recovering from external card), its a twisted fix but it worked for eventually, i have added the Android 4.3 file (1.43 GB) to my Micro SD Card, and started recovery mode, and went for that option, the device started reading it, and then restarted itself but still stuck on samsung logo, but what i have noticed is that this time when i hooked up my phone to pc, the sweet sound of discovering my phone played, so i know that now i could use odin or even kies, so i went for odin, it recognized the phone, flashed it with the version i downloaded, and it worked. what a relieve
thanks to all of you guys for your help, i hope that this thread would help someone else who hit a dead end.
Best Regards,
herculese911
herculese911 said:
Thank you so much for your suggestions, but actually none of the above, i have done the fix that i was asking about (recovering from external card), its a twisted fix but it worked for eventually, i have added the Android 4.3 file (1.43 GB) to my Micro SD Card, and started recovery mode, and went for that option, the device started reading it, and then restarted itself but still stuck on samsung logo, but what i have noticed is that this time when i hooked up my phone to pc, the sweet sound of discovering my phone played, so i know that now i could use odin or even kies, so i went for odin, it recognized the phone, flashed it with the version i downloaded, and it worked. what a relieve
thanks to all of you guys for your help, i hope that this thread would help someone else who hit a dead end.
Best Regards,
herculese911
Click to expand...
Click to collapse
Thanks for sharing your experience
Hey, i have the same issue.
Can you please link me to the recovery from external sd??
Thanks.
Shahar.