Related
Searched and did not find this in the Vibrant forum.
My Vibrant suddenly will not mount. I have it set to MASS STORAGE as it always has been, and now it won't bring up the USB notification on the phone and I get a USB Device not recognized error in Windows XP and Windows 7.
The phone is NOT rooted. I flashed JI2 with ODIN. I know it worked after that because I copied back my music movies and games back to the Vibrant from pc's running XP and 7.
Any ideas?
I had that happen to me, too, after I had soft-bricked my phone and then tried to use Odin to recover. I ended up getting the phone back through Clockwork Recovery, but by then it had stopped being recognized in Windows. Try re-installing the drivers (available here http://forum.xda-developers.com/showthread.php?t=728929). That fixed the problem for me.
Tried those, don't work for me. Not sure what the heck is going on. Finally get the phone working nicely with the JI2 update and now this...sheesh.
Any other suggestions?? I confirmed that it's not a driver issue, I tried my coworkers vibrant on my PC and his and it mounts fine. When I connect mine, same old error. I even did a factory reset, same results.
I have the exact same problem.. my vibrant soft bricked, so I reflashed stock rom with ODIN and it seemed to be fine.. then after a while it just stopped being recognized on my computer. Tried both on mine and my husband's. It's not the drivers, I've installed and reinstalled. There doesn't seem to be any fix for this??
sorry to bump an old thread but was there ever a solution for this?
Same happend to me today . I nandroid back to a point it was working and did not help . I read somewhere that formatting the drives help some but im not sure I want to lose all my **** .
AgentFour20 said:
Same happend to me today . I nandroid back to a point it was working and did not help . I read somewhere that formatting the drives help some but im not sure I want to lose all my **** .
Click to expand...
Click to collapse
I don't know if it's the drivers. I think it has something to do with Odin. I softbricked my vibrant twice and had to use Eugene's Froyo that won't brick then back to 2.1 and finally a custom rom. I think somewhere in there something happened...
I havent used odin lately . It was working fine then it just stoped working . I got the drives to show up but it window say "One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it" .
Couple of things you can try:
1) Try setting the USB mode to Samsung Kies. Somehow, mass storage never worked for me, but Kies mode works just fine.
2) Try installing ES File Explorer from the market. With that you can get into a home network while on WiFi, thus allowing you to transfer data between your computer and phone using your WiFi network, thereby eliminating the need for cables.
So far I've done a few things and i still get "USB device not recognized" .
Here's what I've done .
1) reinstalled drivers
2) formatted internal and external
3) restored to a previous nandroid
guruchimi said:
Couple of things you can try:
1) Try setting the USB mode to Samsung Kies. Somehow, mass storage never worked for me, but Kies mode works just fine.
2) Try installing ES File Explorer from the market. With that you can get into a home network while on WiFi, thus allowing you to transfer data between your computer and phone using your WiFi network, thereby eliminating the need for cables.
Click to expand...
Click to collapse
It is recognized when switched to kies but the drive int/ex still dont show up . I was going to odin to stock but odin does see it . Im probly going to download a the stk nandroid and exchange it .
sorry, I have to bump this up in hopes of the night crowd having an idea. Seriously wtf...
help please
heeeeeeelp
Is it recognized in any other computer ?
Sent from my SGH-T959 using XDA App
Mine is not recognized by any computer, by odin or kies at all. This happened after I flashed a rom using odin fixing a soft brick. I don't know if it is a hardware problem or not, I have flashed to different roms using rom manager and usb is still not being recognized.
Sent from my SGH-T959 using XDA App
So I was hoping some of you guys could help me out.
Recently my Vibrant started to give me trouble with my computer. But it's only my vibrant with my computer. I can connect to any other computer no problem. Any other device is easily recognized by my computer except the vibrant.
It started after using PDANET's tethering app. I was at one point tethering all the time putting my phone in usb debugging mode and running pdanet on my computer. Then I also started using the bluetooth tethering. Once I finally got internet at my new place i stopped using the tethering option. But then I realized when i tried to get files off my phone my computer wouldnt recognized my phone anymore.
The error I get is
USB Device Not Recognized.
One of the usb devices on this computer has malfunctioned and windows does not recognized it.
Usb Root Hub Unknown device.
Try Reconnecting the device if windows still does not recognized it replace the device.
In the device manager the properties of the "unknown device" says
Status: Windows has stopped this device because it has reported problems. (Code 43)
I've tried the solution posted under here
USB Fix - Win7 x64 - USB Device not Recognized
and I've used both drivers from Samsung Kies and here
[Drivers] MS Windows x86 and x64 USB Drivers for Samsung Galaxy S
(Sorry can't post links apparently)
When I try to update the driver manually for the unknown device it says that it has already selected the best driver for the device. So i don't know if it really updated it.
Any Suggestions would be really helpful. Thanks!
espy1988 said:
So I was hoping some of you guys could help me out.
Recently my Vibrant started to give me trouble with my computer. But it's only my vibrant with my computer. I can connect to any other computer no problem. Any other device is easily recognized by my computer except the vibrant.
It started after using PDANET's tethering app. I was at one point tethering all the time putting my phone in usb debugging mode and running pdanet on my computer. Then I also started using the bluetooth tethering. Once I finally got internet at my new place i stopped using the tethering option. But then I realized when i tried to get files off my phone my computer wouldnt recognized my phone anymore.
The error I get is
USB Device Not Recognized.
One of the usb devices on this computer has malfunctioned and windows does not recognized it.
Usb Root Hub Unknown device.
Try Reconnecting the device if windows still does not recognized it replace the device.
In the device manager the properties of the "unknown device" says
Status: Windows has stopped this device because it has reported problems. (Code 43)
I've tried the solution posted under here
USB Fix - Win7 x64 - USB Device not Recognized
and I've used both drivers from Samsung Kies and here
[Drivers] MS Windows x86 and x64 USB Drivers for Samsung Galaxy S
(Sorry can't post links apparently)
When I try to update the driver manually for the unknown device it says that it has already selected the best driver for the device. So i don't know if it really updated it.
Any Suggestions would be really helpful. Thanks!
Click to expand...
Click to collapse
I have the same problem on my PC. I would plug in the phone and my mouse would stop working. No tethering app installed or anything.
Anyway, I just tried the ports on the back of the PC and those worked. Try a port closer to the MB
I've tried all my ports. It's still not recognized.
Check the cable and power source. Be sure cable is with good quality. I hade the same issue. I fixed it with original HTC cable and back panel USB from my deskop computer. Front USB of desktop computers often are not enough to power that consumption.
After updating to Froyo it started working again. Thanks though. I still have no clue what caused it.
Bumping to confirm, I found this thread after getting the same error. I had tried several of the USB ports on my computer but after reading this tried the 2 I hadn't yet, they both worked. Not sure why only those work now, but they do work.
Hope this helps someone.
I have a bricked galaxy s which doesn't do anything. Windows 7 reconizes an unknown device and it's not possible to install the samsung driver. Windows says that it allready has the right driver.
I can't seems to reincarnate my galaxy s. Only this small sign of live in windows 7.
It happened when I was flashing 2.3.5 and the connection went down just seconds after the start of flashing so I guess the bootloaders are corrupt.
Anyone any idea how to solve this one?
Vibrant UnBrickable Mod
The same thing is happening to my Vibrant. Tried Rooting and installing various ROMs and it is still "Not Recognized". Tried all ports on all PCs (4) and Laptops (1) and non of them work. espy1988, how did you upgrade to Froyo 2.2 if you could not connect to PC and Kies? This used to work without an issue.
Thanks
Tombias said:
I have a bricked galaxy s which doesn't do anything. Windows 7 reconizes an unknown device and it's not possible to install the samsung driver. Windows says that it allready has the right driver.
I can't seems to reincarnate my galaxy s. Only this small sign of live in windows 7.
It happened when I was flashing 2.3.5 and the connection went down just seconds after the start of flashing so I guess the bootloaders are corrupt.
Anyone any idea how to solve this one?
Click to expand...
Click to collapse
Like said above u might need to be debricked.
seems like ur phone is hard bricked.
---------- Post added at 04:33 AM ---------- Previous post was at 04:26 AM ----------
have u tried Odin back to stock using Odin or hemidal ?
I have the same problem now. I have had my Vibrant for over a year never with an issue. I have Odined it back to JFD dozens of times but now it will not recognize the usb device.
I have GB bootloaders, but never a problem before. When changing Roms I usually Odin back to JFD first and start clean.
My problem started with the phone getting stuck in landscape mode. I was running a 2.3.4 GB rom Sensation. I reflashed a few times but whenever a restored anything from Titanium it would revert back to landscape only. I decided to go back to a 2.2 rom and plugged in the phone to Odin and it was not recognized, also not as a mass storage device, no go. I used Samba to copy a 2.2 rom, Trigger, to the phone and flashed from there. The phone is good now except the computer still won't recognize it. I can use Samba to access the SDCard but I hate not being able to use Odin if things go south. Tried all usb ports and a new cable, no go. Really wierd.
Looking for suggestions......
If you're still under warranty claim it & send it.
Had same problem. There is no fix short of replacing USB port.
I found my problem. It was dirty/corroded usb port. I carefully cleaned it out (took a few times) and it's all functioning again. I also cleaned the contacts on my original usb cord and it is working again also.
I'm just now having this problem for the first time. I've tried all USB ports and cleaning the port on the phone with no luck so far. Can someone point me to the unbrickable mod mentioned early in this thread?
jnusz said:
I'm just now having this problem for the first time. I've tried all USB ports and cleaning the port on the phone with no luck so far. Can someone point me to the unbrickable mod mentioned early in this thread?
Click to expand...
Click to collapse
Have you tried installing the installing/re-installing the Samsung drivers (LINK), using another USB cable, or even another computer? I just want to make sure you've tried it all before attempting to do a hardware mod.
Anyhow, you can find a link to the unbrickable mod and other hardware mods in the "Official XDA Vibrant Bible Thread", under the "MODS/SCRIPTS" section (LINK).
Mine is the cable btw. My wife has a GSII and I was able to use her cable.
I just bought a pre-rooted fascinate. The dude i bought it from said he had MIUI flashed on it, and I trusted the guy. The rom was a TSM Voodoo kernel based Rom. I was dumb and didn't read up on Voodoo and MTD. Since I know that MIUI and CM7 are very similar, I flashed CM7 on top of the rom running.
Everything runs fine, except USB DOES NOT WORK! I cant even enter download mode to use Odin. Is there a way to get this fixed?
Thanks in advance!
The Mtd based roms such as cm7 and miui actually use the nexus drivers of I am remembering right. If I were near my computer I would gram you a link to one of the threads
Sent from my cm7 SCH-I500 using Tapatalk
It is not the fact that the computer will not recognize the phone.
The phone itself does not recognize the fact that a usb is plugged in even with the usb debugging on it does not pop up with any usb commands on the phone. usb mass storage will not come up and because the phone will not recognize the usb i am not able to get the phone to access download mode.
couple simple things to try..
1) make sure your using a factory oem usb cable
2) clean the usb port with some contact cleaner(make sure phone is off and battery pulled)
if this does nothing than maybe the phone itself has a problem and will need to be repaired/or replaced.
I know you probably already tried this but, have you got the latest samsung drivers installed on your computer you are using. From what I have seen it it most likely doesn't use these drivers but, it is worth a shot I guess. Like the guy said before there might be something wrong with the USB port. Even when I have completely bricked my phone and it will do absolutely nothing, I am always able to get into download mode. That mode is like a pre-boot mode that doesn't use any drivers or files associated with any of the roms we flash on them (as far as I am aware of). May be the reason the guy sold it to you in the first place. He couldn't do anything with it.
People!, I'm about to pull all my hair out on this one
Vibrant is soft bricked in a boot loop after a incomplete flash, I am able to get it into download mode but both my windows machines say USB device isnot recognized, and thus, I cant use ODIN to return to stock. When I try to manually point windows to the samsung drivers I get nothing…
So far I have tried drivers from:
-Bay_wolf's AIO Vibrant Toolbox 2.5
-USB drivers for vibrant from samsung support site
-Drivers from samsung keyes
Side notes that might help: I was perviously using a Hellybean Rom. My device displays "Galaxy S gt-9000" on boot... not sure when that came to be but maybe some rom changed some important recognition stuff??...
I found this thread http://forum.xda-developers.com/showthread.php?t=1008383 but no help...
Any help would be greatly appreciated!!
Try a different USB cable. This happens more than you'd think. Even cables that have worked just fine hundreds of times.
Also.... Locate the drivers in system/device manager and delete them manually and try to install them again. Unplug device and install fresh ones from either aio toolbox or Kies, then plug phone back in.
Best of luck!
Toast6977 said:
Try a different USB cable. This happens more than you'd think. Even cables that have worked just fine hundreds of times.
Also.... Locate the drivers in system/device manager and delete them manually and try to install them again. Unplug device and install fresh ones from either aio toolbox or Kies, then plug phone back in.
Best of luck!
Click to expand...
Click to collapse
Thanks a ton for reply but, sadly, no dice.
Tried connecting the phone, getting the "unrecognized device" prompt, finding "unknown device" in device manager, right clicking to uninstall. rebooting my machine, using various install methods to re-install drivers, re-connecting, and nothing.. same issue...
I lost the original cable a while back, but can't accept that NONE of the other 5 cables used are all broke... specially if the computer recognizes something going on... is it worth buying a new one?
Losing hope here, been like this for 4 days now, think it's time to go get a new phone. :crying:
Even so, it would have been nice to get what was a perfectly working phone back if only to keep it as a mp3 payer.
If anybody in New York, NY has a working odin set up that can do this for me, I have a 6 pack of your favorite beer with your name on it.
It could be a hardbrick such as bootloader getting corrupted that happened to my Sony Xperia Play (now an expensive paper weight).
I assume you boot into download mode by holding the two volume buttons, then connect the cable? Have you tried on a different PC? It can also be the weak powered USB port on the PC. Also when you uninstall the Samsung driver, check the option to also delete USB driver and uninstall any drivers. Also which version of the driver are you using, have you tried version Samsung USB Driver 1.5.3? And the drivers from here: http://www.samsung.com/us/support/owners/product/SGH-T959ZKATMB#
For what its worth, the gt i9000 screen appears after your on a custom GB boot loader and Odin back to stock (or probably Odin flashing any other ROM) you can change it by flashing the GB boot loader again. My phone says its a i9000 too, but I'm just about lazy enough to not bother changing it, lol.
So that's unrelated.
eksasol said:
It could be a hardbrick such as bootloader getting corrupted that happened to my Sony Xperia Play (now an expensive paper weight).
I assume you boot into download mode by holding the two volume buttons, then connect the cable? Have you tried on a different PC? It can also be the weak powered USB port on the PC. Also when you uninstall the Samsung driver, check the option to also delete USB driver and uninstall any drivers. Also which version of the driver are you using, have you tried version Samsung USB Driver 1.5.3? And the drivers from here: http://www.samsung.com/us/support/owners/product/SGH-T959ZKATMB#
Click to expand...
Click to collapse
Ok, faith momentarily restored. But I have questions:
-What do you mean when you say "check the option to also delete USB driver and uninstall any drivers"? I dont get such a prompt from right clicking on "unknown device" and selecting uninstall? Is there another method to uninstalling drivers?
-In the link attached, I can only find "Device(Install),USB Driver (Software) (ver.1.0)" not the 1.5.3 version mentioned. What am i doing wrong here? currently searching google for the 1.5.3 but finding nothing.
I get into download mode by holding volume- up + power. Have 2 PCs ( win xp and win 7) and a mac running mountain lion (but never ever have been able to get Heimdall to work, so devoting time to odin.)
Thank you for the time + help, guys, I really do appreciate it in the time of utter un-nerdness.
If the device is already installed it will have a check box that said "Delete the driver software for this device." If its unknown then obviously not. By "uninstall any driver", I mean uninstall any Android drivers you current have installed and reboot before you reinstall the new driver.
Although I doubt it will make a difference than the one I linked above, you can try the Samsung driver version 1.5.3: http://www.mediafire.com/?r0uc3h413qcy80z
If you did manage to get into download mode and see this: http://images.google.com/search?num=10&hl=en&site=&tbm=isch&source=hp&q=download+mode
Then it mean there is a very good chance you can restore the phone, if you can find a computer to recognize it and Odin to see a COM port.
I definitely think it would be worth the money to go buy an OEM USB cord. I can't tell you how many times I have seen this and a new USB is the fix.
sent from the depths of helly bean
OK guys...
My friend, who also owns a Vibrant, let me borrow the cable that came with the phone for the last 2 days.
Tried to make ODIN work on both PCs at home, gave Heimdall a shot on my mac, even hijacked a computer at work for the better part of the morning and freshly installed USB drivers 1.5.3 before connecting. All for nothing... “Unknown device” across the board....
At first I felt that with being able to get into download and have SOME kind of a reaction from connecting to PC had to be a good sign. Almost completely convinced that there is some unknown, unworkable hardware problem present. Definitely, officially, unremarkably out of ideas here.
Nothing is beautiful and everything hurts.
Last thoughts? Options at this point?
Also, tried One-click Unbrick tool on mac. I got a "is your phone plugged in, is it on download mode?" error, but anyone reading this down the line with a similar problem should check it out.
http://forum.xda-developers.com/showthread.php?p=15330252
Hi guys,
I'm new to this forum. I've got a Samsung i777 on android 2.3.6 kernel 2.6.35.7 build number gingerbread.uckk6
I've recently bought this phone off ebay
My phone does not get detected by windows 7 or Macbook. I've tried changing the USB flex cable with I9100 v2.3 but still no luck.
When I connect USB port it beeps and shows mtp-initialization/mtp-connected on the phone but it is not shown on windows. It says USB cannot recognise the device. I've got a s3 and ideos x3 both of them are detected.
I've installed kies 3 on my laptop.
I had to swtich off the wifi on the phone because it consumes a lot of battery, I think it is because of the android version I'm using!
I want to root the phone and unlock it!!
Any help is appreciated!
Sent from my SAMSUNG-SGH-I777 using xda app-developers app
I'm guessing the problem is the Samsung drivers you have installed for the s3. Try uninstalling those and installing the correct drivers for s2.
Sent from my GT-p511x
you can check this thread for driver
http://forum.xda-developers.com/showthread.php?t=961956
You most likely need a new cable. Happened to me once! Could be the drivers but I HIGHLY recommend just trying a new USB cable.
Thank you guys for all your help really appreciate it!
I have tried all the steps mentioned above tried to uninstall all the previous drivers I had and installed the new driver as mentioned in the above link but no luck
I tried it on a friends computer with a different cable still it shows the USB device is not recognised!!
kshah1606 said:
Thank you guys for all your help really appreciate it!
I have tried all the steps mentioned above tried to uninstall all the previous drivers I had and installed the new driver as mentioned in the above link but no luck
I tried it on a friends computer with a different cable still it shows the USB device is not recognised!!
Click to expand...
Click to collapse
Did you install another ROM? It might help to Wipe system, Data, ETC! it appears to be a software problem. Or at least my guess is the ROM your using.
The Galaxy phones all use the same USB drivers whether it's an S2, S3, S4, etc., so if the installed drivers were working for your S3, it's unlikely to be a driver issue.
Can you boot it into download mode? If you happen to have a USB jig, that's the easiest. Otherwise, power off the phone, unplug the USB cable, hold Vol +/Vol-, then plug in the USB cable. It should go into ODIN download mode. See if Windows detects the phone that way. If so, it very well could be something weird with the OS installed (although it appears to be stock).
If you can get into download mode, you can flash a stock kernel to make sure you are starting fresh. A good file repository is found here. I recommend the stock UCKH7 image I777_UCKH7_OCD_No_BL.7z (you'll also get root).
And yes, the UCKK6 release had a serious bug related to the wifi that could drain your battery. Best to go with UCKH7.
You could also download an app that allows you to enter download mode.
SighIsAnonymous said:
Did you install another ROM? It might help to Wipe system, Data, ETC! it appears to be a software problem. Or at least my guess is the ROM your using.
Click to expand...
Click to collapse
How would I be able to change the ROM if the phone is not detected
jpasher said:
The Galaxy phones all use the same USB drivers whether it's an S2, S3, S4, etc., so if the installed drivers were working for your S3, it's unlikely to be a driver issue.
Can you boot it into download mode? If you happen to have a USB jig, that's the easiest. Otherwise, power off the phone, unplug the USB cable, hold Vol +/Vol-, then plug in the USB cable. It should go into ODIN download mode. See if Windows detects the phone that way. If so, it very well could be something weird with the OS installed (although it appears to be stock).
If you can get into download mode, you can flash a stock kernel to make sure you are starting fresh. A good file repository is found here. I recommend the stock UCKH7 image I777_UCKH7_OCD_No_BL.7z (you'll also get root).
And yes, the UCKK6 release had a serious bug related to the wifi that could drain your battery. Best to go with UCKH7.
Click to expand...
Click to collapse
I was able to boot to download mode by holding the vol +/- key and then plugging in the USB cable but there is no movement from the computer it doesn't make a sound nor does it detect. I tried restarting the phone then I get a notification on windows that USB device not recognised!
Yes I guess this rom is useless, if the wifi is switched on then battery would not even last 6 hrs!
kshah1606 said:
I was able to boot to download mode by holding the vol +/- key and then plugging in the USB cable but there is no movement from the computer it doesn't make a sound nor does it detect. I tried restarting the phone then I get a notification on windows that USB device not recognised!
Click to expand...
Click to collapse
Are you saying to get a balloon notification in the tray that says the USB device is not recognized? A possible reason for that is a faulty USB cable or USB port (funny enough, I actually got that message last night when I was playing around with my Captivate, and switching USB ports made it work). I know you said you've tried other computers an another USB cable, but that's about my only idea. Maybe there's some debris inside the connector that's messing up the connection.
When you say you changed the "USB flex cable", are you talking about the internal connector and board inside the phone? If so, perhaps the I777 connector board is actually a little different than the I9100 board and causing a compatibility issue.
The bug in UCKK6 related to wifi didn't affect everybody, but it definitely affected a lot of people (based upon reports here).
kshah1606 said:
How would I be able to change the ROM if the phone is not detected
Click to expand...
Click to collapse
If you have an SD card, you can download another ROM on that SD card from your computer and then you can install custom recovery (CWM) and then install the ROM from SD card.
kshah1606 said:
How would I be able to change the ROM if the phone is not detected
Click to expand...
Click to collapse
First ill run you through the problem I had. Just for reference did you use Mr. Cooks script before flashing Cyanogenmod 11? One of his scripts for cleaning before flashing, actually deletes a certain file, not to keen on which one. What it results in though is not being able to flash OF ROMS and some certain custom ROMS! So id recommend alliance's ROM! As for the "Getting the ROM on your device, you could put the ROM on your SD though recovery "Mount and storage/Mount mass storage/" or just use a micro sd card adapter and move it on there that way.
Thanks for your reply. Would you mind sending me the link on how to do that step by step as mentioned I'm new to Samsung phones and also this forum.
Your help is appreciated
Sent from my SAMSUNG-SGH-I777 using xda app-developers app
kshah1606 said:
Thanks for your reply. Would you mind sending me the link on how to do that step by step as mentioned I'm new to Samsung phones and also this forum.
Click to expand...
Click to collapse
What state is your phone currently in? Is it still not detected by the computer? You are still on 2.3.6, correct?
If it's still not being detected by your computer, I'm not sure if you can flash anything needed using the stock recovery. I know that when I flashed stock JB, I was able to boot into stock recovery and directly apply the standard CWM update file here. It will give boot into a temporary CWM that should allow you to flash other ZIP files (like a ROM), although I had trouble doing that (so I ended up flashing the AJK_v4.9_NoSwap.zip kernel using the MobileOdin android app, which gave a permanent CWM recovery).
I'm not sure if this same process works with the 2.3.6 recovery. However, in order to get the stock recovery to see the internal SD card, I had to run adb shell commands to mount the partition (meaning I had to have a working connection from the computer).
Solved!!!
HI Guys,
Many many thanks for all your responses!
I have changed the USB flex cable again to an older version v2.2 and my phone is currently being detected by kies! So relieved thanks a lot for all your help..now the rooting begins!!:laugh: