Related
Hello everyone,
I have tried the two reg patch by Sin () to add the Handsfree profile to my Qtek 2020 (with WM2003SE). I use the very good Bluetooth headset by Globalsat BTH-808, and I have seen these things:
- When in Headset mode: the blu BT Led on the Globalsat flash one time per second. If one call incomes, an icon on the top bar light on in my Qtek and I can use the Globalsat to answer the call, or I can transfer audio back to Qtek and use it to answer the call.
- When in Handsfree mode: the blu BT Led on the Globalsat flash three time per second (awful). An icon noticing the HF Profile is ever on the top bar (with or without a call incoming, and this is not good, i think). If one call incomes, I can use at the same time the Globalsat or the Qtek (audio comes out from the Qtek and from the Globalsat).
Where is the good useful way of this? Why do I need the Handsfree profile too? to make voice dialing (adding relative software)? I didn't liked it and I disabled back the HF profile...
Can someone explain to me how the Hadsfree profile is good?
Thank's
facts
Hands free mode is great when using the right OS.
hands free is more robust. It offers caller ID, etc.
Headset will not do caller ID but I believe it may offer better battery life.
Also with your 2.02-2.06, you will notice while in hands free that the mic on the headset does not work, only the one on the phone.. Even though you can hear sound on the headset!!
If I am wrong, please tell me.
One OS that supports Hands free is the 2.20 translated or in original Chinese. But the caller ID is not consistent on some if not all devices. The caller ID will not be displayed if you have already received the call or if it is in your contacts. It also has some bugs when someone calls on the call waiting and you switch over to it, you will loose the sound on both the headset and the phone until you turn off hands free and then back on.
The other OS, 2005, is GREAT with the Hands free and the phone program, no bugs AT ALL with bluetooth and the phone, BUT, the contacts, email and calendar database are different so it will not work with many programs and the memory size is messed up and small.
I am switching back to my 2.20 translated today.
I wish someone wuld fix it.
Re: facts
ccrrazzzy said:
Hands free mode is great when using the right OS.
hands free is more robust. It offers caller ID, etc.
Click to expand...
Click to collapse
Hmmm, no... with my device (Qtek 2020, aka XDA II/MDA II and WM2003 SE 2.06) the CallerID works great with either Headset profile and Handfree Profile...
ccrrazzzy said:
Headset will not do caller ID but I believe it may offer better battery life.
Click to expand...
Click to collapse
Yes this is real: Headset is more light for battery life cause it lets BT headset to go online only during call incoming...
ccrrazzzy said:
Also with your 2.02-2.06, you will notice while in hands free that the mic on the headset does not work, only the one on the phone.. Even though you can hear sound on the headset!!
If I am wrong, please tell me.
Click to expand...
Click to collapse
According to me you are wrong, cause my device have the headset mic working in either Headset and Handfree profile. The only practic difference between the two profiles are that HS goes idle and come online only during call incoming, instead HF is online not stop.
ccrrazzzy said:
One OS that supports Hands free is the 2.20 translated or in original Chinese. But the caller ID is not consistent on some if not all devices. The caller ID will not be displayed if you have already received the call or if it is in your contacts. It also has some bugs when someone calls on the call waiting and you switch over to it, you will loose the sound on both the headset and the phone until you turn off hands free and then back on.
Click to expand...
Click to collapse
Again... with my device all works fine, but I don't like the headset all time in waiting/online modem with its led blinking speedly and the boring icon on the top bar (so if you miss a call or receive a sms, you see the baloon tooltip to advice you that more than 1 alert are waiting). I don't know about your bugs cause I never tested these cases
ccrrazzzy said:
The other OS, 2005, is GREAT with the Hands free and the phone program, no bugs AT ALL with bluetooth and the phone, BUT, the contacts, email and calendar database are different so it will not work with many programs and the memory size is messed up and small.
Click to expand...
Click to collapse
I am yet not happy about the WM2003SE 2.06WWE speed on booting and its stability... so I will not go further on with Magneto/WM2005... When I will be able to do, I will buy a new device with Magneto natively working...
ccrrazzzy said:
I am switching back to my 2.20 translated today.
I wish someone wuld fix it.
Click to expand...
Click to collapse
Good flashing and have a nice weekend!
The difference between the two right now using WM2k3SE is:
Handsfree allows you to redial the last number using your BT headset (hold headset button for 2-3 secs).
Headset allows to use the BT headset to talk on the phone.
Other than that they don't do anything else with the current OS (at least for me)
tesking
I am using a Jabra BT800 and I have talked to people who are using Erickson HBH200 and HBH660 and one guy who is using an xLive. The people I have talked to using 2.02 or 2.06 or Sin's 2.02-2.06 merge, all said these devices are not having the caller ID working and the Hands Free would give them the stereo affect.
You are the first.
I have tried 2.02, 2.06 and the Sin's combined one. All would not display properly with the caller ID on my BT800. And even with the addition of the reg key, hkey local machine, software, Microsoft, Bluetooth, "HandsfreeProfileOn", I would get the caller ID, only if the number was not in my contacts and it was not already in my call history of the BT device.
I have also tried BT tools, I have tried every patch and tried all the widcomm stuff too.
I am very curious to know what you have for a ROM and any BT additions or patches and I am very interested to know what caller ID BT device you have.
Maybe you misunderstood what I was saying as well, please know that I was talking about caller ID being displayed upon the BT device, not the phone.
One other thing that Hands free does is allows for the possibility of BT activated voice dial. Like the the voicesignal program on my MPX300.
There has to be a hardware specific driver for each device so when you press the button, it transfers the audio and Mic to the BT headset and starts the voice recognition program. Other wise, we would have had BT voice dial on our HTC devices by now. http://forum.xda-developers.com/viewtopic.php?t=15191&start=50
ccrrazzzy
I misunderstood the BT device you're using for caller ID (I don't have such device, I was talking about the phone itself).
As far as redialing using the Headset, I am using the Motorola HS850 and I was able to use it to redial the last number. However I end up turning the Handfree off when I don't need it in order to avoid the Mic issue on the headset. When I paired the headset, I chose headset profile only. When ever I need the handfree capability, I normall go under Start/Settings/Connections/Bluetooth/Devices hold my stylus on the device (HS850) then choose "Set as Hands-free" on the pop menu.
For Crrrrraaaazzzyyy:
For Crrrrraaaazzzyyy:
Sorry for your device... I can tell you that with the Globalsat BTH-808 (see the ebay link below), it works smooth in headset Profile (1 or 2 seconds and I can answer from the headset button), and it works smooth in Handfree profile (but as I said, i don't like the behaviour): you can buy the headset from here
http://cgi.ebay.it/ws/eBayISAPI.dll?ViewItem&item=6334980179
Have a nice day!
BT
Sorry I was not clearer at first. I was speaking about the caller ID on the BT headset or in a BT car audio system.
Hands free is needed to have features like caller ID on the BT device and voice dial and to be able to scroll through the BT device's caller ID history and make calls from that while leaving your cell phone safely tucked in your briefcase or hip case.
With my MPX300, because it supports BT voice dial through the BT headset, and with my caller ID on my Jabra BT800 BT headset, I can have all the power of my phone on my ear; being able to make calls through the caller ID history and through dialing via voice dial by speaking the phone number OR speaking the contacts name AND be able to see who is calling me, all while my cell phone-PDA is about 30 feet away!
I just wish we had this on the XDAII because I hate my MPX300; small screen and low memory make it useless.
Through the 2.20 OS, I am able to get caller ID functioning somewhat, but I have to disable call waiting. However to get BT voice dial to work, we will need someone to make a driver like the one that is in the MPX300 and use software like FONIX or www.voicesignal.com
Here is how we can make voicedial work on BT.
http://forum.xda-developers.com/viewtopic.php?t=19233&highlight=
XDAII-TSM500 and Jabra BT800 incompatibility ???
I cannot use neither the microphone nor the headphone of the BT800 instead of the XDAII for listennig mp3 files or recording notes.
When I use headset mode, I can speak and hear throuhg BT800 and it is possible to use the buttons to answer and hang during a phone calling, but is not possible to dial, see the caller number and other features.
When I use handsfree mode, I can get most of features but the BT800 microphone does not work and I have to use the one of the PDA.
Any way, only it is possible to use the BT800 in phone mode, not in PDA mode. However it works perfectly whit my IPAQ.
Could anybody give me any idea ?
BT
Please read everything.
Again,
With a caller ID device like the BT800, it needs Hands Free mode to work right. 2.02 and 2.06 do not do Hands Free well.
Only 2.20 and 2005 but 2005 has other bugs. In 2.20 you must disable call waiting or live with clicking upon Tools, Hands-Free Off, then Tools, Hands-Free On to resume the sound on the BT headset when you try to switch back to the first call. You will have to do this even if you ignore a call.
2005 works VERY well with BT and the phone but there are other bugs like lack of memory and database not compatible with third party programs.
I am sorry ccrrazzzy
I did not mention I have two other poblems:
One is that I am a beginner whith these machines, less than two weeks working whith them, and some concepts are confusing to me.
The other is, my short english (obvious ?) make me misunderstand things and to explain them is even worse.
I understood that all problems appear using the phone and not using the PDA for listening mp3 files, for example. When I use the BT800 whith my IPAQ 5500 (headset only) works like a wired headphones and I thought that it should work in the same way whith the XDA, forgeting the phone features.
I will try whith 2.20.
Many thanks for your answer and excuse me.
mp3 will not work unless you get http://www.bluetake.com/products/BT420EX.htm or the HP one.
While using Headset profile, in 2.02, 2.06 and 2.20, The BT800 will work but I experienced an 8 or 9 second delay before call is transfered to the headset when someone call me. Calling out is OK.
Hands free and 2.20 is only good way with BT800.
No audio on BT headset on the XDAII, no matter what OS... Like the mono audio on your other pda, it will not work on xdaii.
I am trying the xLive now, will post results. It has built in MP3 player and is BT cell phone Hands free. Only $90.
These will not make you look like you are from outer space
http://www.itechdynamic.com/html/border22.htm
Support HiFi audio, stereo but I doubt they will work on the XDAII.
You could make them work with the widcomm stack but that stack does not work with Hands Free and I forget if it works with Headset.
If this thing had caller ID and worked for sure with the XDAII, I would get it.
Anybody using the SE HBH-DS970 bluetooth headset with the Hermes and if so what is your experience?
Thanks
i use that one waht is your wonder?
I wanted to know if everything works fine and if you are happy with the experience (sound quality, responsiveness, etc.).
I tried it briefly at a store and everything seemed to work except when I received a call I could not hear the person talking. It may just be that I needed to do a soft reset but if I know it is working with the Tytn for someone else I will buy it.
Thanks!
No Good.
1. Sound Quality is very poor even with the A2DP hack. Far from my M600i. It's much better with the original usb headset. so I guess maybe Sony Ericsson has a different A2DP encoding implement or have some tricks on the media player?
2. Only the Call Key and Volume keys work. I don't know if there any PPC music player support DS970's music keys.
1. After registry twiks the sound quality is super.. seems even better than native usb headset.. Only one problem I couldn't solve so far.. it is skipping every 40-50 sec. I am using now original rom from o2 germany. I am going to try imate rom or at least new radio rom. Let see, if it helps
2. All keys are working with native Windows Media Player.
I am using it with PocketPlayer. Works fine with every button. Sound quality is super after the hack. But I got the same problem as SWayf, music got skippy every while...
Multipoint Function with PC Headset profile?
Has anyone tried to pair this headset with a Hermes and simultaneously with a PC that supports the bluetooth headset profile so that it is possible to switch from VoIP (eg Skype) and the mobile phone easily?
Following on my previous post, I now have the headset in hand and although I can connect to my PC and phone simultaneously using the multipoint functionality, the PC connection is only for music playback, ie the microphone is disabled, so I cannot use the headset for VoIP calls. The Bluetooth Service Class is listed as "Audio Sink" rather than "Headset". I don't suppose anyone knows of a way to activate the microphone in this mode?
SWayf said:
1. After registry twiks the sound quality is super.. seems even better than native usb headset.. QUOTE]
wud u please tell that what exactly u did, caz i m new at ppc's
thx
Click to expand...
Click to collapse
Really regret buying it.. Tried the A2DP tweak with the Hermes Tweaker but no luck. Better soundquality but sound keeps skipping every 30-40 seconds, useless for listening to music... I would got nuts having to listen to those skips that often..
Anyone found any tweak to get rid of the skipping problem?
Buttons works fine for controlling Tytn audio quality is ok and I love the looks of it, if I just could get rid of that skipping..
How sick is this! I found this tip on another forum.
Try installing this taskmanager, start wmp and then the task manager, close any apps you don't need to use and then set it to monitor system load.
http://www.iaccarino.de/silvio/ppcstuff.htm
As long as it's running NO SKIPPING so far, have been listening to three full songs so far....
Which of you gurus can figure this one out??? So it must be possible to fix the problem by emulating what this software does??
Any updates on this?
Considering buying one, but wont if there's no fix to the skipping
I've just bought one of these headsets. God, the sound is atrocious. Can someone please fill me in on the hack that was mentioned earlier? I've got the Fit4cat ap on my Hermes but the sound is still rubbish even after adjusting the the "improve BT A2DP sound quality" setting to "excellent". Is this the hack that was referred to earlier or is there another I am not aware of??? Please, can anyone help with this. I feel I have wasted a serious amount of cash on this
http://forum.xda-developers.com/showthread.php?t=284974
This is what you need to read/download.
Hi!
Got hermes and ds970 to work (almost) perfectly
I did this, step by step:
-Hard reset hermes (got o2 xda trion with latest htc wwe rom 1.35 radio 1.18)
-installed ms voice command 1.6
-installed beta version from jetware and their hermes fix
(all files can be found here http://www.jetwaremobile.com/beta.htm don't forget to soft-reset after installation of the "code signing certificate")
-installed a2dpfix
-get HTweakC and set a2dp quality to "medium" do not set it any higher, as the sound quality will be better on medium than on e.g. "excellent"
Configure Jetware Software to show CallerID etc...
Working:
-CallerID shows name!! AND number (alternating) everytime
-A2dp quality is quite good (could be better, but definately very usable)
-Voice command quite usable (still rarely switches back to device speaker)
-very stable bluetooth connection
-remote control of windows media player
not working:
-display doesnt show song title, but i guess we'll never get that on a wm5 device...hope i'm wrong.
Wanna thank everyone on the hermes gps thread...keep up the good work!!
so you can stream media player to the headset too as well as controlling VC1.6? Does VC1.6 fire up when pressing headset button?
Hi!
When I'm listening to music, and press the headset button:
-Mediaplayer goes on pause
-after 2-3 seconds I hear the voice command ding-sound and can say my command. Then hear the lady from microsoft ;-) respond (on long responses the sound sometimes switches back to the device speaker such as when the lady asks me what number-entry to dial and there are 5 numbers in the contact.)
-then switches back to playing mediaplayer for about 2 seconds until the phone initiates the call and then pauses mediaplayer again and switches the headset to the call.
-after the call sound again goes to a2dp and the song resumes playing.
Hope it stays that way...I'll be very very carefull what programs I install.
programs I got installed at this point are:
spb diary
prssreader
navigon mobile navigator 5
google maps (the new not java one)
wakeitup
pocketstreets 2005
tcpmp
clearvue pdf
spb gprs monitor
totalcommander
+the ones mentioned in my post above
(all programs, if not mentioned otherwise, are the latest versions)
oh BTW I tried setting a2dp quality to "low". I can't hear the difference to "medium" and think it will be less stress on the cpu.
what does not work, is also that the announciation of new messages from voice command 1.6 when set to "announce only over bluetooth" still come out of the device speaker.
Hope it works for you, too.
excellent. i'll try these settings. thanks for detailed message
got myself a ds970 and followed your instructions Brevi. music streams brilliantly but i can't transfer calls to the headset,make calls from the headset nor can i get VC1.6 to fire up when i press the headset button. if i start VC1.6 on phone, then i can say command on the headset and that works.
Do you install the JetDial app?
What settings did you configure in the Jetware settings?
any ideas?
i have the "new" btagext.dll which fixed VC1.5 and mono headset - do you think that's the issue?
Update: Aha, i uninstalled the JetDial app (stupid or what) and now everything works except starting VC1.6 using the headset button. i suspect, JetDial has left some reg keys that need removing. No idea what though
Hi! Yeah, you probably need to do a hard-reset to get a clean install of all the little "helpers". I'm confident it will work then.
Tell me if you get the "play reminders only over bluetooth handsfree" option in vc1.6 to work maybe with the btagext.dll. I'm away from my main computer for a couple of days and unfortunately can't mess with my phone till I get back.
Hi.. has anyone use mw600 on x10?.. I've try It but no caller or music id displayed on it.. just caller phone number..
Sent from my X10i using XDA App
lazirahs said:
Hi.. has anyone use mw600 on x10?.. I've try It but no caller or music id displayed on it.. just caller phone number..
Click to expand...
Click to collapse
It's not a bug. That's just how it is with the X10.
Ok.. thank you very much...
Sent from my X10i using XDA App
Been using the X10 with the MW600 for 3 months now.
You can:
-be synched to your laptop and when you receive a call, the phone will take over.
-listen to radio and answer calls.
-See the phone number of whomever is calling you.
-double press the talk button to redial last outgoing contact.
-Use the play, rewind and forward buttons to control mediascape.
You can't:
-See the name of the contact even if it is saved in your phonebook.
-See the name of the track.
The two can'ts are what stands the mw600 out, but I honestly do not regret getting it as for it has decent audio transmission. Plus, there is a chance of this all being fixed after update by SE
trojjanhorse:
Good info.. thanks..
Listening music from notebook and receive call from x10.. I'm happy with it..
Sent from my X10i using XDA App
lazirahs said:
trojjanhorse:
Good info.. thanks..
Listening music from notebook and receive call from x10.. I'm happy with it..
Sent from my X10i using XDA App
Click to expand...
Click to collapse
no problem.
I use a mac, so I don't know if this will hold true for you as well. When I use the MW600 as a "headset" the audio quality diminishes, but when I use it as "stereo headphones", the audio quality is great.
Its all in the profiles...
trojjanhorse said:
no problem.
I use a mac, so I don't know if this will hold true for you as well. When I use the MW600 as a "headset" the audio quality diminishes, but when I use it as "stereo headphones", the audio quality is great.
Click to expand...
Click to collapse
This is essentially true for all bluetooth capable PCs as well. In bluetooth terminology the term "headset" and "headphones" refer to what is called as bluetooth profiles. More info here:
https://secure.wikimedia.org/wikipedia/en/wiki/Bluetooth_profile
The "headphones" or the Advanced Audio Distribution Profile (A2DP) is designed to provide high quality audio (stereo or mono) transmission capabilities between two bluetooth capable devices. Hence, the difference that you notice.
j4mm3r said:
This is essentially true for all bluetooth capable PCs as well. In bluetooth terminology the term "headset" and "headphones" refer to what is called as bluetooth profiles. More info here:
https://secure.wikimedia.org/wikipedia/en/wiki/Bluetooth_profile
The "headphones" or the Advanced Audio Distribution Profile (A2DP) is designed to provide high quality audio (stereo or mono) transmission capabilities between two bluetooth capable devices. Hence, the difference that you notice.
Click to expand...
Click to collapse
good to know, thanks mate.
Just a quick dumb question: Can I use the X10's charger to charge the MW600? I am going on a trip soon and just want to carry one charger. Thanks.
visitador02 said:
Just a quick dumb question: Can I use the X10's charger to charge the MW600? I am going on a trip soon and just want to carry one charger. Thanks.
Click to expand...
Click to collapse
Yes, you can use either or.
MW600 also works fine with spotify. Recommend the AKG K 450 headset with the short cable
With android 2.1 the x10 will be able to show track names and caller names as it doesn't lack the blutooth profiles which android 1.6 doesn't have.
Ps: just sitting in the train listening music with astro player through mw 600
Sent from my X10i
Does thw mw 600 come in white ??
Sent from my X10i using XDA App
afaik, there is no specific profile for displaying music track names, but caller ID work off the phonebook access profile (PBAP). so i'm guessing music track titles work off the phone's pbap as well?
I've just got mine, the quality is really good.
Additional bad points for me:
Mediscape: I can use the play/pause & skip tracks on the video, but doesn't work on the music !?
No "hold" on the buttons, as I keep accidentally touching the volume controls as volume control is touch sensitive
I haven't tried the voice activated calling though...
xtekm said:
I've just got mine, the quality is really good.
Additional bad points for me:
Mediscape: I can use the play/pause & skip tracks on the video, but doesn't work on the music !?
No "hold" on the buttons, as I keep accidentally touching the volume controls as volume control is touch sensitive
I haven't tried the voice activated calling though...
Click to expand...
Click to collapse
Weird.. it worked for the music for me.
for the touch sensitive volume button, you should hold it, not swipe it if you want to use the pause/play/next/prev buttons. it shouldn't that hard.
Mine definitely doesn't work with the music (in Mediascape), only with the video...
When I press on any of the 3 buttons:
PREVIOUS KEY / PLAY-PAUSE KEY / NEXT KEY
the light either side of middle button of the x10 lights up, but that's it.
I'm on standard R2BA020 (yeah, I tried switching it off and on again = didn't fix it!)
- also tried SEUS, it said no update for me - followed instructions (including taking the battery out etc)
I've only got one other music app = tuneWiki = the buttons work on that.
So, for me, Must be something wrong with Mediascape's Music program
== Quick Update ==
I've just rooted my x10i / debranded it, and managed further update the firmware (via SEUS) to R2BA026
= Still no joy on the playback controls for Mediascape's Music.
I've resetted the Headset
= Still no joy on the playback controls for Mediascape's Music.
Hope the next major update will fix this for me...
Instead of using the headphones can you activate the speaker phone to listen to the radio?
i just got my mw600 today. I havent used it for the gf's x10 yet (im in charge of the phone, she's just the end user) but it works fine on my k790a. It displays the name of the caller, the song titles and all the buttons work as suggested.
Im curious as to why this old ass phone from 2006 is capable of doing all this while the flagship x10 cant....
I am running the current leak of Froyo... if I bluetooth connect to my car audio system for hands free calling I lose all external sound when I disconnect. I have gone through all the audio settings with nothing appearing out of place. The first Froyo rom I tried redirected the ringer out the earpiece, the new leak kills it completely. All ideas welcome.... I will try anything. Thanks in advance!
Sent from my SGH-T959 using XDA App
I will take one more swing at this. Anyone?
Sent from my SGH-T959 using XDA App
Download this widget it will toggle the audio and should give you external sound let me know if this works worked for me
http://code.google.com/p/toggleheadset/
Onyx powered vibrant
Thanks for info, unfortunately it didn't fix the issue for me. Back to square one.
Sent from my SGH-T959 using XDA App
I'm having the same issue. each time I connect to my car's bluetooth audio and made a call, I'll lose the notification sounds. even calls won't ring.
currently had to resort to phone's speaker function, but that won't do.
am scouring the net for some answers, and will update if i found anything.
Samsung Galaxy S
How was there no reply to this? I have had the same issue on every samsung vibrant 2.2 rom, including custom roms. now i am having the same issue on my stock galaxy s 4G! Help?
Bump!
Running Nero on Galaxy S.
Same problem with Vibrant + Froyo 2.2
Sounds strikingly similar to my experience with my Samsung Vibrant running Froyo 2.2 + custom Axura 2.3.1.3 ROM.
After disconnecting any bluetooth device, in some cases the phone's speaker is completely muted (media/system/notification volumes all cranked to max) until I either reboot or make a voice call and enable speakerphone.
I've hunted high and low on the webternets for a solution and have come up dry.
I smell a bug.
Same problem Stock Vibrant 2.2
Bughound said:
After disconnecting any bluetooth device, in some cases the phone's speaker is completely muted (media/system/notification volumes all cranked to max) until I either reboot or make a voice call and enable speakerphone.
Click to expand...
Click to collapse
Thanks, I guess - at least I don't have to keep rebooting since the voice call/speakerphone workaround gets my sound back. This is a PITA.
I have the same issue in MIUI_Au since 1.10.x revisions (previous versions worked OK). I had exactly the same problem 6 months ago with Villain ROM and it was the reason I dumped it. It seems to be a CM7 issue...
Bughound said:
make a voice call and enable speakerphone.
Click to expand...
Click to collapse
Thanks for that...keeps me from having to reboot. And I'm even running (embarrassingly) the 2.2 update direct from Samsung. Need to finally take the time to root…
I use A2DP with JABRA headset e.g. with Sygic + Navigon route planners.
Every time when a spoken instruction is started the BT radio is swithed on but appearently needs some time to go alive and you always miss the first part of the instruction on the headset.
I sincerely hoped (this is my main application for the flyer) that after the official FOTA of HC this would be somehow fixed but sadly it is not.
Does anyone know a workaround or a solution for this?
Is there a way to not switch off the BT radio with silence while BT is switched on? (nevermind the battery use!)
Thanks
Ronald
Clearly I need to find another forum for this issue.
Any suggestions where?
Clearly
Sent from my PG41200 using XDA App
Clearly,,,,
but its not the radio turning off, if the radio turned off, it would disconnect/ this happens on a lot of devices, especially hands-free car devices, they miss the first part of audio when its not continuously streaming. Happens on my Flyer and Moto and Samsung phones with my Moto BT car device. There's no solution available.