Soft Keys Vibrate after JI5 update - Vibrant Q&A, Help & Troubleshooting

I upgrade to the new JI5 yesterday and everything seems to be work great except i can not get the soft keys ( Menu, Home, Back, Search )
i have the Haptic feedback checked in the setting menu
anyone have nay suggestions?
thanks

mines work just fine, just flashed ji5 via odin and re rooted.
try wiping and a reflash via odin?

i used the one click lag fix from the market and that was what was causing the issue
undone the one click lag fix
and issue resolved

Related

[Q] Saurom ROM - Home Button stopped working?

Flashed the Rom, I searched the thread and found nothing, but after flashing and restoring my apps+data my home button stopped working. Not the feedback, just the entire button itself, gone.
Anyone have an idea of how to fix this?
Edit:: Reflashed ROM and it's working now, forgot to do the ATT fix before I rebooted, hopefully I can just reapply it now and it'll be fine >_<

[Q] Help x10a screen touch not working after flash

Hi,
I flashed my x10a with latest flashtool with 2.3.3 firmware. The flash was successful, but after the flash it's screen touch is no more working. I thought that there might be problem with the firmware that I used, so I again checked with many firmwares, but none of them solved my problem.
Then I tried to repair my phone with Pc Companion, it says that no software is available for my phone. Also I tried with Sony Update Service, this also said no software for my phone.
I am tired now. I tried all the methods that I found on internet. Isn't there any solution for me now? I know that It's not a hardware problem because before flashing its screen was working without any problem. I know you guys here are expert in android problems. So hope you will help me in this problem? I am from Nepal. There isn't sony service in my country. What is the solution for me? I need your help....:crying:
could you tell us exactly what you flashed with flashtool ?
and what i understand is that your phone DOES work it fully loads up but not responding to your touchscreen ?
and any other info on what you might have flashed ?
it could just be freezing (so it seems like its not responding)
Bjornlindekens said:
could you tell us exactly what you flashed with flashtool ?
and what i understand is that your phone DOES work it fully loads up but not responding to your touchscreen ?
and any other info on what you might have flashed ?
it could just be freezing (so it seems like its not responding)
Click to expand...
Click to collapse
Bro thanks for your reply, I flashed X10a_2.1update1_r2.1.A.0.435_Generic.ftf, X10a_3.0.1.G.0.75_AMERICA-US GENERIC 1233-8200.ftf, and few more firmwares like this. I used flashtool-0.8.0.0-windows_2.exe to flash the phone. Ya you are right my phone DOES work it fully loads up but not responding to my touchscreen
Keys are working well, volume keys, back keys all are working. After flashing finished option comes to choose the language and I can't go ahead than that because screen touch will not work.
me.amar said:
Keys are working well, volume keys, back keys all are working. After flashing finished option comes to choose the language and I can't go ahead than that because screen touch will not work.
Click to expand...
Click to collapse
did your touchscreen worked on 2.1 firmware
as im googling for this problem EVRYTHING leads to software problems.
for example this post
"''The touchscreen on my phone stopped working. Everything else is working (buttons), except the touchscreen. It shows everything but I can't do nothing with my finger.. I've had this problem before, but then it could be fixed by simply taking out the battery and rebooting that way. This time that didn't work. First thing that I tried was factory resetting the phone, clearing all caches, etc. Touchscreen still not working after booting. Then I flashed SonyStyle V1.1 touchscreen still not working. Then I 'repaired' it with SEUS, touchscreen was working fine.""
so the best thing you can do right now is use SEUS to get back to original firmware.
http://sony-ericsson-update-service.en.uptodown.com/
and a guide to help
http://www.esato.com/board/viewtopic.php?topic=171599
if it works then you are absolutly sure its not a hardware problem.
techdevilisnowmonster said:
did your touchscreen worked on 2.1 firmware
Click to expand...
Click to collapse
Before flashing it was working.But after flashing it didn't worked on any firmware
Bjornlindekens said:
as im googling for this problem EVRYTHING leads to software problems.
for example this post
"''The touchscreen on my phone stopped working. Everything else is working (buttons), except the touchscreen. It shows everything but I can't do nothing with my finger.. I've had this problem before, but then it could be fixed by simply taking out the battery and rebooting that way. This time that didn't work. First thing that I tried was factory resetting the phone, clearing all caches, etc. Touchscreen still not working after booting. Then I flashed SonyStyle V1.1 touchscreen still not working. Then I 'repaired' it with SEUS, touchscreen was working fine.""
so the best thing you can do right now is use SEUS to get back to original firmware.
http://sony-ericsson-update-service.en.uptodown.com/
and a guide to help
http://www.esato.com/board/viewtopic.php?topic=171599
if it works then you are absolutly sure its not a hardware problem.
Click to expand...
Click to collapse
Does this works for android phones?
yes the tutorial is just wrong i noticed .
you could just use it as a guideline tough my apolegies

Changing Firmware - small problems

Hi,
Originally my phone was from the UK Carphone Warehouse (CPW)
I have upgraded it from 2.2 to 2.3 etc...
The last time I did a firmware upgrade to ICS was a few months back and I didn't have any problem doing it.
After the upgrade, I had a few bugs. I used this file - GT-I9100_XEO_I9100XXLPW_I9100OXALPW_I9100XXLPW.tar and the main bugs I have are - The screen won't lock and when I press the Power Button, it will turn the screen off but when I hold it for 1 second the phone closes down.
So today I thought, lets see if I can change my firmware to a CPW version, so I downloaded GT-I9100_XEU_I9100XWLP7_I9100XXLPS_I9100XEULP5.tar and installed that. It went through the usual stuff and upon restarting I was getting an "android.core" crash. The screen stops working and after several reboots nothing change. I also booted up and cleared the cache, and this didn't do anything either.
I have just reverted back to the first ICS upgrade but still has not screen lock or when I press the power button for 1 second it closes down.
I wondered if anyone else has had these problems or could recommend to me what may fix it.
I appreciate all help
Thanks
TBS
TheBritScott said:
Hi,
Originally my phone was from the UK Carphone Warehouse (CPW)
I have upgraded it from 2.2 to 2.3 etc...
The last time I did a firmware upgrade to ICS was a few months back and I didn't have any problem doing it.
After the upgrade, I had a few bugs. I used this file - GT-I9100_XEO_I9100XXLPW_I9100OXALPW_I9100XXLPW.tar and the main bugs I have are - The screen won't lock and when I press the Power Button, it will turn the screen off but when I hold it for 1 second the phone closes down.
So today I thought, lets see if I can change my firmware to a CPW version, so I downloaded GT-I9100_XEU_I9100XWLP7_I9100XXLPS_I9100XEULP5.tar and installed that. It went through the usual stuff and upon restarting I was getting an "android.core" crash. The screen stops working and after several reboots nothing change. I also booted up and cleared the cache, and this didn't do anything either.
I have just reverted back to the first ICS upgrade but still has not screen lock or when I press the power button for 1 second it closes down.
I wondered if anyone else has had these problems or could recommend to me what may fix it.
I appreciate all help
Thanks
TBS
Click to expand...
Click to collapse
You're in the wrong section, this has nothing to do with development
Sent from my SGH-I777 using Tapatalk 2
First of all wrong section mate... By the way u hav written it seems that u hav not wiping the DATA or factory reset after every flash. Try wiping DATA before and after flashing.. Also wipe cache..

Soft Buttons Not Working

Hi guys,
A couple of months ago my soft buttons stopped responding and not lighting up (even in recovery). However I flashed the Omega rom again, restored by backup and they worked.
Now it has happened again. Tried a mega wipe, flashed Omega v51 and they were not working.
Any ideas before I return to stock?
Cheers.
http://forum.xda-developers.com/showthread.php?t=1835931
Flashed that. Still not working.
To the service centre?
Do the buttons working on other ROMs?
mat48 said:
Do the buttons working on other ROMs?
Click to expand...
Click to collapse
Don't even work with Philz Touch Recovery. They also don't light up during boot.
Looks like hardware issue. Warranty.
An update for anyone else with this issue...
Took it to my local Samsung service centre and it has been returned fixed. They apparently 'cleaned and adjusted the contacts' for the soft buttons.

[Q] 4.3 OTA bug for SCH-I535

After updating to the OTA 4.3 my S3 now has a glitch causing the screen to occasionally black out, mostly during phone calls but also after screen timeouts when i hit the power button to turn the screen back on it'll stay black for awhile, the menu and back buttons light up and the touch sensor still works even when black. it work flawlessly before the update. I tried to root and was successful at it using the saferoot method but because of the know being lock I can not install a custom rom or recovery and the problem was still there because I was still using the 4.3 rom. So I used odin3 vs3.07 and put the stock rom back on and unrooted and the problem is still there. does anyone know how to fix this glitch or does anyone know how i can go back to the 4.2.1 rom or install the 4.4.2 rom because 4.3 has been nothing but a headache for me.
johnwilliams-84 said:
After updating to the OTA 4.3 my S3 now has a glitch causing the screen to occasionally black out, mostly during phone calls but also after screen timeouts when i hit the power button to turn the screen back on it'll stay black for awhile, the menu and back buttons light up and the touch sensor still works even when black. it work flawlessly before the update. I tried to root and was successful at it using the saferoot method but because of the know being lock I can not install a custom rom or recovery and the problem was still there because I was still using the 4.3 rom. So I used odin3 vs3.07 and put the stock rom back on and unrooted and the problem is still there. does anyone know how to fix this glitch or does anyone know how i can go back to the 4.2.1 rom or install the 4.4.2 rom because 4.3 has been nothing but a headache for me.
Click to expand...
Click to collapse
Wrong forum my friend >> http://forum.xda-developers.com/galaxy-s3-verizon <<

Categories

Resources