A major problem has developed with my qtek. All the programs have disappeared. When I press start I am greeted with a completely blank page.
All the shortcuts on the mian screen are invalid and I can't run anything.
The phone is still funtional and I can access my contacts and calendar information but I can't sync it because it looks as though activesync is missing.
I have tried a soft reset (battery out) but the problem persists
I even tried a hard reset using the power on soft key method but this didn't actually go into the hard reset screen. It looks as though the rom is corrupt - has anyone had an experience of this?
I am now getting device low on memory messages all the time but can't even attempt to remove anything as I can't access any programs - please help!!
Please read the other thread where you asked what buttons the softkeys were.
Hardresetting will probably work, or installing the latest rom from your distributer might also work, but try the hardreset first.
That is what I thought - altough hard reset does not work and all the programs are missing including activesync so I can't put a new rom on it either!
Hard SPL your phone first before proceeding.
Don't let your battery to discharge completely, if it happens, connect the charger (red led appears), take out the battery (with the charger still connected, red led remains on), put the battery back (orange led appears) and then fast turn the phone on and enter bootloader mode because there the phone is charging even that no led is on.
Google Android kernel build working from NAND memory.
I am glad to introduce you the result of our hard work, based on the android kernel and tinboot bootloader, made by DZO. I am, vsavichev, working on kernel, my friend hrustile- on design and system, and my friend blyha- on the hardware researching and testing part.
HOWTO Installation process.
Doing on the security unlocked phone under your own responsibility, all unlocking info is here: http://forum.xda-developers.com/showthread.php?t=355730
1. Download Nikeimg.7z, archive contain 2 images, for 20 or 16 keys keyboard.
2. Flash it like usual firmware, which means:
2.2 From the SDcard:rename file NIKEIMG16K(20K).nbh to NIKEIMG.nbh and put it to the root of SD card. Make folder named "andboot" in the root of your SD card and put there android build itself, which usually named "androidinstall.tar",if not, rename it. My recommendation is this one, from my friend hrustile : http://www.multiupload.com/OYW85PFMH1. No need to format SD card or remove any files. Turn off your phone and reboot to bootoader mode (e.g. hold CAMERA and POWER buttons) Then phone will detect itself that there is a firmware is on your SD card and will ask your to press POWER button, so press it. Flashing takes about 20 seconds, after it's over pull the battery or press reset.
2.3 From the PC: same procedure exept no need to put NIKEIMG.NBH on the SD card. You need to put it to the folder with flasher on the PC. The rest same as SD card flashing.
But it's not all!!!
3. Turn device on and wait until i says "Hold down Volume Up or DPad Center to launch installer" press and hold central button, you'll see installer menu. If you missed yo press button- reset and press it directly after seeing some output on the screen.
Choose Data & Sys on "(*) NAND" and press Install android, then answer yes twice. Now installation process is started, wait for a minute or so.
4 And at last after installation is over press Quit, first boot takes some time so be patient. Then enjoy your Android.
Click to expand...
Click to collapse
Working:
1. Sound
1.1 Loud speaker
1.2 Voice speaker
1.3 Headset
1.4 Volume adjusting
2. Network
2.2 Bluetooth
2.3 GSM
2.4 GPRS/EDGE/3G
3. Camera
3.1 Main
3.2 Front
4. Hard Buttons
5. Display
5.1 Touch
5.2 Calibration
6. Power Managment
6.1 Hybernation(Sleep)
6.2 Brightness Adjustment
7. Vibration
Works/Not works
Click to expand...
Click to collapse
Here are the last tested images, archive contains 20k and 16k version. I tried some radios, the best one was 1.71k.
Thank you for your hard work！
Darkforcesteam HD2 Forum developed the android, not a simulation. You can contact them, it is possible to obtain some information. If you need darkforcesteam forum account can contact me, my mailbox [email protected]. My English is poor, which is out through Google translations. Sorry.
Can you solve the BUG android on Chinese support it?Thank you
No, chinese is so far from me, im russian.
First, thanks for the advanced work!
I try this last night, and it looks great and smooth, but I have a problem for it.
Mine is Niki100, the screen touch function seems not working properly. I can't finished unlocking the phone, the screen froze after I slide it from left to right.
Anything I can try?
Looks strange for me, if problem is in locked screen only you can unlock it with double pressing of camera button. Then, if screen is still frezed, long press on POWER and then the RED PHONE, sometimes helps. Anyway, the work is very far from over, so i hope there will be a lot of improovments, this build i put here only to show that there is a hope, because all the previos threeds ended so hopeless.
thank u for your work!
but my phone raido is 1.59,your rom can't work on my phone ,if you fix this BUG, it will be perfect!
I don't think it's possible to fix a kernel for a specific radio, but it will be very useful for me, if everyone who tests my build will post the issues wich he will have for sure and the radio version, so i can find the problems, caused by radio and the problems, caused by kernel.
Latest news, now internet connection working.
What's new? Network connection in my cell phone is normal.
Some improvements, now we have all the functions, like under HARET.
How to install?
It seems when I long-pressed the icon (want to delete home screen shortcut), the screen touch works no more. Sometimes It randomly happened when I press several time short-pressed. Other than that, the phone function works fine, and 3g connection is fine too.
vsavichev said:
Some improvements, now we have all the functions, like under HARET.
Click to expand...
Click to collapse
Do we have update for niki16k ?
poyfoster How long does the screen touch work before freeze? Or it happens just after boot? Please, post your radio version, i need it for statistics too.
About 16k update- you are the first to ask, no problem, i'll make one for you in a couple of hours.
It's this a rom?
How to install ? Its only androidinstall.tar and ZIMAGE. There is no default.txt and Haret and initr.gz, I download this package but still dont know how tu run it. Maybe someone can explain me, my device is HTC touch dual NIKKI 20 keys
It works from NAND, wich means your windows mobile will be gone. So you need to be very sure what are you doing before do something.
So if you still want to flash android, you need to put NIKEIMG.nbh on the rootof sd card,
androidinstall.tar and androidupdate.tgz to /andboot/ folder.
Turn off the device, hold CAMERA and POWER buttons, until you get to bootloader, then press power again.
Now press reset or pull battery off, then power on your phone. After splash screens you will see some fast running output, when you see something like "Hold center or volume up button to install" you need to hold center button. All the other stuff is like usual HARET installation, exept you need to put systrm and data on NAND in installer. After install complete, you need to install update before exit.
I need 16K，thanks
Okey, my problem is this.
I have installed the phone locator beta from their website. Like the name says it's an app to see where your phone is if it gets stolen, wipe it through sms and do some other stuff. I did not manage to finish the application setup cause I got a phone call during the process. After that I'm locked out of the phone and the phone screen keeps shutting down. It instantly shuts back down after I turn it on. It stays on for like half a sec sometimes, sometimes less. I have managed to uninstall the application through adb to no avail. I have made a backup through recovery also hoping I will be able to restore it without getting the same problem.
But it appears that if I restore the data I get the same thing happening.
Other things I have tried:
Reflashing ROM. It's the stock one from Vodafone.
Reflashing CF-Root Kernel.
Trying to figure out which process I have to kill through adb. But I'm not experienced enough with this to do it.
Trying to remove everything about the app I find out. Still did not work.
Anyone has another idea. I really had a lot of data I don't want to lose.
Thank you.
Update: Solved in post 3.
justrome0 said:
Okey, my problem is this.
I have installed the phone locator beta from their website. Like the name says it's an app to see where your phone is if it gets stolen, wipe it through sms and do some other stuff. I did not manage to finish the application setup cause I got a phone call during the process. After that I'm locked out of the phone and the phone screen keeps shutting down. It instantly shuts back down after I turn it on. It stays on for like half a sec sometimes, sometimes less. I have managed to uninstall the application through adb to no avail. I have made a backup through recovery also hoping I will be able to restore it without getting the same problem.
But it appears that if I restore the data I get the same thing happening.
Other things I have tried:
Reflashing ROM. It's the stock one from Vodafone.
Reflashing CF-Root Kernel.
Trying to figure out which process I have to kill through adb. But I'm not experienced enough with this to do it.
Trying to remove everything about the app I find out. Still did not work.
Anyone has another idea. I really had a lot of data I don't want to lose.
Thank you.
Click to expand...
Click to collapse
What I would do is enter recovery mode. From there mount usb storage and transfer everything that's important to PC. Then wipe everything, format system, format sd card and reflash a ROM through CWM. Obviously mount again usb storage to push the ROM from PC to sd card. Maybe it's a little drastic but I can't think of anything else since I'm not a pro user or anything. Well, just an idea.
Hey thomas. Thanks a lot.
I think that's a great idea. At least it's something I did not try and might work well.
I just found out that you can enter usb storage from recovery, right now it seems I can only see the /mnt/sdcard partition. I will play with it a little to see if I can mount the other partitions before mounting USB. I think the application data is in /data/data am I right?
Okey I have managed to fixed it in the most stupid way possible.
I have noticed that if I leave the screen off for like 15 seconds then I get like 2 seconds window before the screen turns off again. I have managed to go to the screen timeout settings and it seems like the application changed that to a very low value as none of the defaults value were ticked. I have ticked the 1 minute value and now the screen stays on.
I have uninstalled the app and I'm really afraid to test it again I should probably make another backup in this state
First off all, I'm not sure if this question is answered else where.
I have my S2 almost since the day it came out in NL.
Today a problem occurred. After I boot my phone it keeps rebooting the launcher (not sure if that's the correct name). The phone it self stay's on, I don't go back to the Samsung logo or what else - just Android it self keeps rebooting.
I run Go Launcher Ex for a long time, never had problems with it.
I assume it's a memory problem.
Had a similar problem about a year ago, where my internal memory was stuffed. After removing some apps etc. my phone was just fine again. Problem today is I cant do anything. Connection with pc fails, because of the rebooting software. I'm not even fast enough to get to the Android settings.
Edit: I tried booting in Safe Mode. Which works, till it reboots into normal mode.. and keeps rebooting. And of course there's no time to get something done in safe mode.
- Phone get's really hot when this all happens. An other indication for a stuffed memory(card) I think?
- Removed the SD + SIM, no changes.
Edit:
I was quick enough to change the launcher to something else (i believe Nova, via Home Switcher). Then reboot my phone in Safe Mode with Nova on, then the reboot of the software starts again.. and it forces itself into Go Launcher Ex without Safe Mode.
Thanks in advance,
DrushNL said:
First off all, I'm not sure if this question is answered else where.
I have my S2 almost since the day it came out in NL.
Today a problem occurred. After I boot my phone it keeps rebooting the launcher (not sure if that's the correct name). The phone it self stay's on, I don't go back to the Samsung logo or what else - just Android it self keeps rebooting.
I run Go Launcher Ex for a long time, never had problems with it.
I assume it's a memory problem.
Had a similar problem about a year ago, where my internal memory was stuffed. After removing some apps etc. my phone was just fine again. Problem today is I cant do anything. Connection with pc fails, because of the rebooting software. I'm not even fast enough to get to the Android settings.
Edit: I tried booting in Safe Mode. Which works, till it reboots into normal mode.. and keeps rebooting. And of course there's no time to get something done in safe mode.
- Phone get's really hot when this all happens. An other indication for a stuffed memory(card) I think?
- Removed the SD + SIM, no changes.
Edit:
I was quick enough to change the launcher to something else (i believe Nova, via Home Switcher). Then reboot my phone in Safe Mode with Nova on, then the reboot of the software starts again.. and it forces itself into Go Launcher Ex without Safe Mode.
Thanks in advance,
Click to expand...
Click to collapse
go in e3 recovery and perform factory reset
DrushNL said:
First off all, I'm not sure if this question is answered else where.
I have my S2 almost since the day it came out in NL.
Today a problem occurred. After I boot my phone it keeps rebooting the launcher (not sure if that's the correct name). The phone it self stay's on, I don't go back to the Samsung logo or what else - just Android it self keeps rebooting.
I run Go Launcher Ex for a long time, never had problems with it.
I assume it's a memory problem.
Had a similar problem about a year ago, where my internal memory was stuffed. After removing some apps etc. my phone was just fine again. Problem today is I cant do anything. Connection with pc fails, because of the rebooting software. I'm not even fast enough to get to the Android settings.
Edit: I tried booting in Safe Mode. Which works, till it reboots into normal mode.. and keeps rebooting. And of course there's no time to get something done in safe mode.
- Phone get's really hot when this all happens. An other indication for a stuffed memory(card) I think?
- Removed the SD + SIM, no changes.
Edit:
I was quick enough to change the launcher to something else (i believe Nova, via Home Switcher). Then reboot my phone in Safe Mode with Nova on, then the reboot of the software starts again.. and it forces itself into Go Launcher Ex without Safe Mode.
Thanks in advance,
Click to expand...
Click to collapse
Go to recovery and wipe cache and wipe dalvik Cache. If still not working then do Factory Reset. If the problem is still there than flash the rom again.
Sent from my GT-I9100 using Tapatalk
As my main goal was to get my data from the phone I suprised myself a lot and I'm copying as we speak the whole /emmc/ via SDK tools.
It's gonna take a while - I assume it's copying the whole 16GB.
After that I'll try factory reset's etc. and check if I can use my phone again.
Hi,
So here's my problem. (Sorry, it's a long story)
I purchased a phone from a french company ("Archos") three months ago. The Android phone was working fine until lately when I've been getting random freezes. When I would scroll on an app (Twitter's Feed, Reddit Homepage), the phone would freeze. The only way to solve this problem was by rebooting entirely the phone. Sometimes, the phone would also freeze at random moments (on the Lock Screen, the Homepage, etc...) with the only issue being to restart the phone.
I tried to factory reset the phone but it kept on freezing, even freezing on the first page of the Android Setup Wizard (The one with the "Welcome" label and the "Get Started" button) preventing me from touching the "Get Started" button. After multiple reboots and factory resets the phone was still freezing randomnly.
One thing to know is that the phone was apparently running Cyanogenmod since it's primary launcher was Trebuchet. So, I tried to install a stock copy of Android Nougat (7.0) hoping it would fix the problem. The thing is, there's no TWRP image available for my device (Archos Sense 55S). Instead, I used an tool name "SP Flash Tool" to flash directly a copy of Android onto my phone (I managed to find one online).
But the problem did not get solved. Now, it's worse. Before, even though the phone kept on freezing on the first page of the Android Setup Wizard, 1/12 of the time, it would let me touch the "Get Started" button and proceed with the rest. Now, it won't let me touch the button at all, it seems like the application is not receiving any input at all. I know the screen isn't broken because the "Enter SIM Card password" prompt works perfectly fine and when I want to turn off the phone, I can easily select "Power Off", "Reboot", confirms "OK" on the "The Phone will restart" dialog box, adjust the volume levels, the screens responds! But on the Android Setup Wizard: nothing's happening.
I am desperate. It feels like I have tried everything. I cannot install anything else (through ADB & Fastboot) since I can't unlock the bootloader because I can't allow OEM and/or USB debugging (I can't access the settings without completing the Android Setup Wizard). My question is there a way to install a custom rom with SP Flash tool? If so, is it recommend? Won't that brick the phone? Or is it too late now, and it's over?
Thank you for your time.