Nand Android Working - Touch Dual, MDA Touch Plus ROM Development

Hard SPL your phone first before proceeding.
Don't let your battery to discharge completely, if it happens, connect the charger (red led appears), take out the battery (with the charger still connected, red led remains on), put the battery back (orange led appears) and then fast turn the phone on and enter bootloader mode because there the phone is charging even that no led is on.
Google Android kernel build working from NAND memory.
I am glad to introduce you the result of our hard work, based on the android kernel and tinboot bootloader, made by DZO. I am, vsavichev, working on kernel, my friend hrustile- on design and system, and my friend blyha- on the hardware researching and testing part.
HOWTO Installation process.
Doing on the security unlocked phone under your own responsibility, all unlocking info is here: http://forum.xda-developers.com/showthread.php?t=355730
1. Download Nikeimg.7z, archive contain 2 images, for 20 or 16 keys keyboard.
2. Flash it like usual firmware, which means:
2.2 From the SDcard:rename file NIKEIMG16K(20K).nbh to NIKEIMG.nbh and put it to the root of SD card. Make folder named "andboot" in the root of your SD card and put there android build itself, which usually named "androidinstall.tar",if not, rename it. My recommendation is this one, from my friend hrustile : http://www.multiupload.com/OYW85PFMH1. No need to format SD card or remove any files. Turn off your phone and reboot to bootoader mode (e.g. hold CAMERA and POWER buttons) Then phone will detect itself that there is a firmware is on your SD card and will ask your to press POWER button, so press it. Flashing takes about 20 seconds, after it's over pull the battery or press reset.
2.3 From the PC: same procedure exept no need to put NIKEIMG.NBH on the SD card. You need to put it to the folder with flasher on the PC. The rest same as SD card flashing.
But it's not all!!!
3. Turn device on and wait until i says "Hold down Volume Up or DPad Center to launch installer" press and hold central button, you'll see installer menu. If you missed yo press button- reset and press it directly after seeing some output on the screen.
Choose Data & Sys on "(*) NAND" and press Install android, then answer yes twice. Now installation process is started, wait for a minute or so.
4 And at last after installation is over press Quit, first boot takes some time so be patient. Then enjoy your Android.
Click to expand...
Click to collapse
Working:
1. Sound
1.1 Loud speaker
1.2 Voice speaker
1.3 Headset
1.4 Volume adjusting
2. Network
2.2 Bluetooth
2.3 GSM
2.4 GPRS/EDGE/3G
3. Camera
3.1 Main
3.2 Front
4. Hard Buttons
5. Display
5.1 Touch
5.2 Calibration
6. Power Managment
6.1 Hybernation(Sleep)
6.2 Brightness Adjustment
7. Vibration
Works/Not works
Click to expand...
Click to collapse
Here are the last tested images, archive contains 20k and 16k version. I tried some radios, the best one was 1.71k.

Thank you for your hard work!

Darkforcesteam HD2 Forum developed the android, not a simulation. You can contact them, it is possible to obtain some information. If you need darkforcesteam forum account can contact me, my mailbox [email protected]. My English is poor, which is out through Google translations. Sorry.

Can you solve the BUG android on Chinese support it?Thank you

No, chinese is so far from me, im russian.

First, thanks for the advanced work!
I try this last night, and it looks great and smooth, but I have a problem for it.
Mine is Niki100, the screen touch function seems not working properly. I can't finished unlocking the phone, the screen froze after I slide it from left to right.
Anything I can try?

Looks strange for me, if problem is in locked screen only you can unlock it with double pressing of camera button. Then, if screen is still frezed, long press on POWER and then the RED PHONE, sometimes helps. Anyway, the work is very far from over, so i hope there will be a lot of improovments, this build i put here only to show that there is a hope, because all the previos threeds ended so hopeless.

thank u for your work!
but my phone raido is 1.59,your rom can't work on my phone ,if you fix this BUG, it will be perfect!

I don't think it's possible to fix a kernel for a specific radio, but it will be very useful for me, if everyone who tests my build will post the issues wich he will have for sure and the radio version, so i can find the problems, caused by radio and the problems, caused by kernel.

Latest news, now internet connection working.

What's new? Network connection in my cell phone is normal.

Some improvements, now we have all the functions, like under HARET.

How to install?

It seems when I long-pressed the icon (want to delete home screen shortcut), the screen touch works no more. Sometimes It randomly happened when I press several time short-pressed. Other than that, the phone function works fine, and 3g connection is fine too.

vsavichev said:
Some improvements, now we have all the functions, like under HARET.
Click to expand...
Click to collapse
Do we have update for niki16k ?

poyfoster How long does the screen touch work before freeze? Or it happens just after boot? Please, post your radio version, i need it for statistics too.
About 16k update- you are the first to ask, no problem, i'll make one for you in a couple of hours.

It's this a rom?

How to install ? Its only androidinstall.tar and ZIMAGE. There is no default.txt and Haret and initr.gz, I download this package but still dont know how tu run it. Maybe someone can explain me, my device is HTC touch dual NIKKI 20 keys

It works from NAND, wich means your windows mobile will be gone. So you need to be very sure what are you doing before do something.
So if you still want to flash android, you need to put NIKEIMG.nbh on the rootof sd card,
androidinstall.tar and androidupdate.tgz to /andboot/ folder.
Turn off the device, hold CAMERA and POWER buttons, until you get to bootloader, then press power again.
Now press reset or pull battery off, then power on your phone. After splash screens you will see some fast running output, when you see something like "Hold center or volume up button to install" you need to hold center button. All the other stuff is like usual HARET installation, exept you need to put systrm and data on NAND in installer. After install complete, you need to install update before exit.

I need 16K,thanks

Related

[Q] Several issues with my HD2 and am running out of ideas

This week I stalled an app which totally ****ed up my HD2. I don't remember the name of the app, but installing it resulted in the following:
-Whenever I press the home hardbutton my navipanel starts up and it is very hard to turn it off.
-Whenever I open an sms or email the screen automatically tilts to the landscape mode and doesn't tilt back.
-Whenever I open opera browser the screen automatically tilts to the landscape mode and doesn't tilt back.
-Start softbutton not working.
This is all quite annoying so I did a reset to factory settings. However this didn't solve the problem, so I am assuming that dreadfull app I installed did an override on the factory settings.
So the next thing I tried was installing the latest rom from the htc website, which should have been an easy thing. However it failed midway. Now the issue is that my computer doesn't not recognize my HD2 anymore when I connect it with the cable.
So the question is? What do I do now? I was hoping anyone could help me with this problem. Before when I was a student I had plenty of time to search the net/forums for a solution, but now I am working full time and I already spend most of my weekend trying to solve this issue. So please anyone help me out
whopper said:
This week I stalled an app which totally ****ed up my HD2. I don't remember the name of the app, but installing it resulted in the following:
-Whenever I press the home hardbutton my navipanel starts up and it is very hard to turn it off.
-Whenever I open an sms or email the screen automatically tilts to the landscape mode and doesn't tilt back.
-Whenever I open opera browser the screen automatically tilts to the landscape mode and doesn't tilt back.
This is all quite annoying so I did a reset to factory settings. However this didn't solve the problem, so I am assuming that dreadfull app I installed did an override on the factory settings.
So the next thing I tried was installing the latest rom from the htc website, which should have been an easy thing. However it failed midway. Now the issue is that my computer doesn't not recognize my HD2 anymore when I connect it with the cable.
So the question is? What do I do now? I was hoping anyone could help me with this problem. Before when I was a student I had plenty of time to search the net/forums for a solution, but now I am working full time and I already spend most of my weekend trying to solve this issue. So please anyone help me out
Click to expand...
Click to collapse
i have to leave for work in 5 minutes so i won't be able to follow this up...but..
when you say factory reset, did everything else go back to what it was as you bought it?
1- can you get to bootloader (when booting up phone hold the "down volume"-- i think it is down, may be up. try it.)
2- if so you are good.
3- in bootloader flash hspl
4- flash new rom
I performed the factory reset multiple times and by 2 methods.
-setting->return to factory settings
-turning off the device-> press down the volume up/down buttons and press cancel call button
All settings were turned back to the original settings however the 2 problems (1: tilting screens and 2: unable to detect device on computer) did not disappear.
I tried to do what jsmccabe78 said, but my device just booted up like normal. No bootloader screen or anything.
I have anyone else has an idea.
Make a backup of your contact list.
And make a Hard reset!
In difficult situations, you can maybe use/do a "Task 29"
using the second option I described is a hard reset
try reflashing a stock ROM.
whopper said:
I performed the factory reset multiple times and by 2 methods.
-setting->return to factory settings
-turning off the device-> press down the volume up/down buttons and press cancel call button
All settings were turned back to the original settings however the 2 problems (1: tilting screens and 2: unable to detect device on computer) did not disappear.
I tried to do what jsmccabe78 said, but my device just booted up like normal. No bootloader screen or anything.
I have anyone else has an idea.
Click to expand...
Click to collapse
now what do you see when you boot your phone? have you tried deleting the settings for your phone on your computer for wmdc/activsync? 0have you tried uninstalling wmdc and reinstalling? try those first.
now, if your computer still does not recognize your phone your next option is to load another rom - whether it is a newer official rom or a customized one (your choice.) if you cannot connect your phone you will need to do this with bootloader.
if you can boot your phone, you can get into bootloader.
to get to bootloader:
turn phone off.
hold "volume down" button key.
turn phone on.
this will get you to bootloader. if this doesn't work, i am out of ideas. you need a new rom and you can flash from an storage card, but you need to have hspl first.
let me know.
now you can 1- flash hspl and 2- flash new rom
Sorry for the late response jsmccabe78. Thank you for your response. I got my phone into bootloader mode which enabled me to make a link to my computer. I ran the stock rom that I downloaded from the htc website and it installed succesfully.
Unfortunately this did not solve the problems I described in the OP.
-Whenever I press the home hardbutton my navipanel starts up and it is very hard to turn it off.
-Whenever I open an sms or email the screen automatically tilts to the landscape mode and doesn't tilt back.
-Whenever I open opera browser the screen automatically tilts to the landscape mode and doesn't tilt back.
-Start softbutton not working.
Click to expand...
Click to collapse
Also my computer still doesn't not recognize my HD2 outside of bootloader mode. Reinstalling WMDC did not solve this issue.
I am still thinking these issues are software related and not hardware related. But reinstalling the stockrom should have fixed the issues if it was software related shoud it not?
So 2 questions remain;
1) How do I fix the issues in the OP
2) How do I get my computer to recognize my HD2 outside of bootloader
I hope anyone can help me solve this mystery.
Try it with no sd card in and see if you still have the problems? If you do :Take out your sd card and put it into your pc with card adaptor. Then delete the application data folder on your sd card. If that doesn't work make a back up of whatever stuff is on your sd card and then re-format it, then and copy back your apps and stuff. If you had a rough idea of what it was you installed try and leave that out when you copy your files back to sd. If you didnt have much on your sd card i would suggest to just wipe it totally and start again. Hopefully this should sort it, if not im out of ideas. Hope this helps if not soz but thought id try
I formatted my SD card, used the return-to-factory-settings function again and still the same issues. No connection to my computer and all the above issues... getting a bit desperate here...
Does anyone have an idea what could be the problem here?

[Q] LG P500 random shutdown

My O1 shuts down every few hours by itself. As everybody told me, i removed the sd card to see if that is the problem, but it still shuts down. Al this "shutdown frenzy" started after i flashed the first custom rom, Void.
I flashed back via nand recovery, i did all possible stuff, but nothing. As i tried reinstalling the original firmware i found out that i coudnt, theres no firmware for Romania, and the KDZ crashez on my machine...
Any suggestions on this one?
Ruwin said:
My O1 shuts down every few hours by itself. As everybody told me, i removed the sd card to see if that is the problem, but it still shuts down. Al this "shutdown frenzy" started after i flashed the first custom rom, Void.
I flashed back via nand recovery, i did all possible stuff, but nothing. As i tried reinstalling the original firmware i found out that i coudnt, theres no firmware for Romania, and the KDZ crashez on my machine...
Any suggestions on this one?
Click to expand...
Click to collapse
Strange... it's really hard way to resolve, but what about some logging on SDCARD? Problem is that it can be really huge file. And Murphy law... it definitely will not restart for many hours...
I just bought a class 6 sd card, i'm testing it, maybe it's the card that shuts down the phone... i'll post the result tomorrow.
Lol man , I have the V10B for romania . I can give it to you on messenger if you add me : zerobarat1 .
Cheers
I had void with gapps, gingerbread, kernel, a2sd, blink, tapps folders on sd. Then I flashed milk_os kernel. Everything was fine.
Then I created stage fright and hwacc folders for quadrant testing. Something happened my neocore score was only 9 fps (though quadrant was 1100). I deleted stage fright, hwacc and kernel folders. Phone was fine again. But was going to sleep of death after some time of non usage. Didn't reboot even from power button. Had to take put and reinsert battery.
So I created the kernel folder again and rebooted. Went into recovery again and applied milk_os kernel again and rebooted. Everything is fine now.
Something remotely similar happened to me a while ago. I found the phone turned off without any particular reason and it refused to power on until I removed and reinserted the battery. It had me worried, but fortunately this didn't happened again ever since.
My problem seems unsolved. I also found my phone dead two times again only in last 4 hours.
Guys any solution. I have void with a2sd enabled and with mik_os kernel 1.1
Did you have the same problem when you were on stock? It might be a physical fault rather than the rom. Also, I believe the latest void already have mik_os kernel 1.1? So there was no need to flash it again.
a2sd maybe? I read quite a lot of issues with that thing.
Miks kernel 1.1 has some scrolling bugs, flash 1.0 and maybe problems solved
I applied mik_os v 1.0. Now everything seems ok for last 16 hours. Will notice further.
Everything ok till now. May be it was something related to mik_ os 1.1.
With 1.0 problem seems to be fixed as of now.
Try dev kernel v3, it's enhanced version of mik's v1.0 kernel
Sorry to say, but this damn bug stroke again. I just found my phone dead, unwilling to reboot unless I took out the battery (which, by the way, was 94% full).
I'm using void #alpha with a2sd and mik_os kernel 1.0 and I don't have the sdcard unmount problem. I can't tell if this also happens on stock ROM since I don't intend to go back to stock ROM until LG rolls out the 2.3 version.
Waiting for some stock ROM user input, but my guess is that this is hardware related.
Any help?
That happens to me all the time!! I took it to LG center and they said it's because of software problem. Anyway, now my phone has one problem. I accidentally made the locker apps to make default screen and it totally black out my home screen. I can't access to my setting to get rid of this apps or can't make even calls. I tried restarting again and again but it doesn't work. How can I uninstall the apps on phone storage by using PC? Or any better way to solve it. I'm a beginner to Android. So, please kindly help me. It is so annoying.
Hit the search button on phone and if search screen appears, type settings in it. If you are able to reach settings, you can do everything from there. Try playing with the search button on the phone.
If this does not help, you will have to do a factory reset. You can do a factory reset by the pressing the combo of home + vol down + power on buttons if you are on stock rom. If other rom, do via recovery.
winnie34 said:
That happens to me all the time!! I took it to LG center and they said it's because of software problem. Anyway, now my phone has one problem. I accidentally made the locker apps to make default screen and it totally black out my home screen. I can't access to my setting to get rid of this apps or can't make even calls. I tried restarting again and again but it doesn't work. How can I uninstall the apps on phone storage by using PC? Or any better way to solve it. I'm a beginner to Android. So, please kindly help me. It is so annoying.
Click to expand...
Click to collapse
same here too .... (when the phone turn off the screen automatically...or auto suspend...is the same) i have the #echo and .... i have the random power off and... some times... it keeps on the boot loop when it supous to suspend... butn when i suspend the phone whit the power button ... the phone keeps working fine... i dont know what to do... XD
I got the class 6 SD and since then i had no problems with shutdown. Though at the time i'm writing, my O1 is at service. It seemed that the shutdowns are related to the sd, even if you don't get any unmount errors. My logs say that each time the phone shut down, it was trying to access a service from the sd memory, and, guess what, there was no sd! So it closed all the services.
could it be unmounting sd card?
After a long time of checking how to fix this, I, finally found it.
I had this error several times, and, I always tried to check where it was the error. I did a factory reset and, suddenly this error stopped. But I needed to know exactly by "doing what" this error appeared.
This error appears in one of this two:
- if you dissactivate the "rotation" in your phone.
- if you dissable bluetooth in your phone
One of those two. If I dissable this two, my phone, in about 1 hour, it suddenly shutdown. But inmmediatly if I enable this options, its stops to crash.
You can toogle this options with the "battery" widget in your phone.
I hope this will help you, as it helped me. Plz, tell all the ppl about, how to fix this.

Huawei Sonic U8650 - (root, custom rom, integrate flash, general topic)

First of all I would like to apologize for not so perfect English
I have U8650 and i would like to make this topic general topic for it. I know there are few topics but there is no much info in them.
I have made same topic on croatian forum for phones so i think it will be better if its on xda because there are much more people that are good in cooking cracking etc.
So lets begin
Detailed specifications can be seen on the LINK, however, the battery is 1400mAh[/ B] and not 1250 (i have sent email to gsmarena to change it but nothing hapend...)
ROOT and the original ROM
After playing with the phone I wanted too root it, after a good deal of trouble, and around 40 readed topics (without overdoing it) I came up with some knowledge, of course the problem is that the phone is currently on only few markets. (spain, croatia, turkey, australia and china i think)
To root U8650 you should flash it with original Rom, Spanish devices dont need original rom to root dont know why it is but it is
ROM
It is necessary to download an official ROM
LINK
After you download it unrar it and dload folder copy to memory card
Path should look like \ dload \ update
to flash device you need to
turn it off
remove the battery for 5 seconds
put the battery back in
press the buttons "VOL +" + "VOL-" + "ON" (all three keys at once)
and will start automatic firmware upgrade
for 3-4 minutes cell is debranded
If you get error not found firmware that means that you did not put the firmware on the SD card like you should (I got it a few times) just off the device and repeat the procedure.
root
After flashing unbranded firmware we can throw at root
software needed for the root LINK
This is similar to debranding.
download root file
Put it on SD card
turn off the phone
remove the battery for 3 seconds
Press "VOL +" + "ON" (without the vol-)
When you open the "bios like" menu use the volume keys up/down to select the update from memory card called root
after this procedure just reboot the phone and you have rooted phone
UNLOCK
My wife is on vip network so I had need to unlock cell
Recommendation for Tibor Szabo's
[email protected] [/ email]
contact the man, he tells you to pay € 13 at [email] [email protected] [/ email]
Send him mail with the payment for approximately 12 hours with you (he said 2-3 days al always come to 24h)[/SIZE]
if this is forbiden on xda i will remove it
If you have any questions please ask, this all is wrote on xda and some other forums i just put all together
[B]Do not think i am responsible if anything goes wrong I have done in exactly those steps and everything works normally. Everything you do yo do at your own risk.[/B]
So: D after a slightly longer introduction with u8650 came the day to put Custom rom.
Of course, for custom rom you will need root thus described above tutorial.
After puting custom rom phone is like 20% faster
few main features
Integrated flash (load all ads from the flash) loads test flash from Adobe i didnt test it much more because yesterday i put custom firmware
new driver for the camera from turkcell that means 5MP camera resolution
Better battery life
overclock processors at 780MHz (you can set it manualy)
Here is the complete list of modifications that is taken with [URL="http://www.htcmania.com/showthread.php?t=262489"]LINK[/URL]
In principle, this entire tutorial is taken from [B]Zadkyn[/B] and translated becuse he is hard spanish guy nothing is on english he is not very good at answering questions but thanks to him we have custom roms and all the improvements.
list of improvements (in English)
[QUOTE]Overall performance improved a lot (it is also the little battery somprendente Spends now even with the 3G)
-Changed icons graphically and manufactures factory setting, added percentage battery icon factory
-Added adobe flash compatible and running (with the strip overlock well)
-Lower spending on drums (set the minimum cpu for this)
-Restored and changed some other applications (all zipiling passed by lower consumption of RAM)
-GPU rendering enabled
Battery-drain slower, less consumption.
Grate black-on camera to make photo with overlock fixed
Overlock-stable up to 780 (no more restarts) to give to more than 722 problems.
-Added and removed other applications
Overlock-Kernel to 844
Unlocked-Kernel
-Operates any headphones
New menu-configuration, more optimized and icons removed rom China.
Bootanimation custom-added, now you can put your wish bootanimation
-Added run-part BusyBox
-Added Apps2SD
Added bash-shell
Zipalign all-in app
New-look graphic
Huawei-optimized new launcher (and consumed as Zeami or less)
-Fix bootanimation
Init.d-scripts folder added
Scrip-added ramscrip
-Applications optimized to consume less RAM
Boot-unlocked
-Data Applications (to uninstall and market updates)
Root-shell
-Added new root
Application-Acrchivos disassembler (ODEX files only is crap and problems)
Removed sea processes on startup
-Original Sources
-Some of deleted applications including Telstra
-Optimize graphics
New Market-added
New menu-bright
-Back to the white menu
-Implement improvements in order to run 3D accelerated 3D notification bar
Added applications-highly recommended.
-More RAM optimized for removing (less processes on startup)
Optimized sub-mic, and works well, you can check any call recording.
Completely changed-Topic icons like systems.
-Removed garbage Telstra [/ color]
, As implemented VoIP, voice dial ip menu to call.
Configuraccion-optimized menu and changed the color to black.
To-quality photos and video recording improved.
Jpg Image-Viewer improved.
-Pixel camera increased significantly (software, which the Turks have for any)
Best answer-ram and optimization (42m).
-Red 2 g 3g and improved (more coverage)
Energia-saving implemented.
Netfilter-range increased.
Less force-closure errors in some applications as well as more support.
-Some more things.[/QUOTE]
I put 1.5 version because it has corrected a couple of bugs.
Biggest object is that he removed default camera app imho it's not a problem because you can instal lg camera.
So here is tutorial
What you will not learn from linked topic (and I found out by sheer luck) is that you need to install drivers and custom "bios" to be able to put custom rom
So first things first
You will need to do procedure in this topic [URL="http://www.htcmania.com/showthread.php?t=256095"]LINK[/URL]
First download the driver for Windows 7 [URL="http://www.mediafire.com/?3bvp3p42t4iqwt2"]LINK[/URL]
So these are the drivers that you install and run you will have a screen with two options press instal drivers
If you have XP and these drivers dont work download this [URL="http://www.mediafire.com/?20qkr711ceuna0n"]LINK[/URL]
I have W7 so I leave to you if this is working for xp (it should work because no one has yet complained )
The second step is to download this file [URL="http://www.mediafire.com/?k421vgl3xy1fgpa"]LINK[/URL] unzip it and run Instalador.bat
You have fine hacker green screen and bunch of Spanish. luckily it doesn't interest us. Go to the next step and that is putting the phone in Fastboot mode.
The third step unplug the battery cell out/in pressing VOLUME - (or the volume down) and the power button and hold for 10 seconds.
it will show you only the Huawei logo and it should only show you that.
Step Four Connect the mobile phone with the USB cable, wait until computer detects it and after a few seconds go ti fine spanish green screen and press any key
It will flash "bios" of the phone it should be ready in a minute or two there is no hurry.
then reset the cell and you should have a fine new "bios".
Check this by turning off cell battery out / in and press the Volume + (volume up) and the power button for 10 seconds.
It should appear with orange letters like from the picture
[IMG]http://postimage.org/image/2d31ltan8/[/IMG]
After you have fine new "bios" you want to put fine new rom
The first step with this rom download [URL="http://www.mediafire.com/?8qd05qhv5flhips"]LINK[/URL]
The second step is to put the zip in the root of your memory card.
The third step going into the BIOS mod So turn off the cell battery out / in the volume + power button for 10 seconds.
You get orange letter menu now navigate with the volume + and - and with the power Buton you confirm it.
The fourth step choose the factory data wipe, then wipe the cache and then advanced wipe devil cache (not the exact name but you will seen it)
Each time when you choose wipe you need to confirm it, always navigate to yes i want to wipe.
Fifth step Return to start of the BIOS and select the custom recovery and navigate to the zip file called zadkin and select it.
When you choose it will start to flash for me lasted about 4minute when it's finished, reboot the system and if everything went well (and there is no reason why not) you will get the boot menu with zad logo.
For first time cell loaded few minutes so patience.
After that you have a nice Costum rom that is faster and more economical with better battery life stronger processor and better camera
If you have questions feel free to shoot.
The same as in the first part of post you do all on yours risk and I am not responsible for any problems and errors. I did everything according to these instructions and I got what i wanted.
[B]CODES[/B]
codes for the service menu
[B]*#*# 2846579 #*#*[/B]
code for the info on your phone
[B]*#*# 4636 #*#*[/B]
All of this is wroted on few forums and i just wanted to put all in one place on the most visited forum for android (xda)
Also i would very like if someone with more expirience can read this tutorial and suggest something.
one more thing that i left out is RAM limitation and i hope to get some answers about that.
also if this helps someone feel free to thank me
Best regards
just flashed your custom rom without problems. its amazing what people can do..!! it seems based on the yoigo firmware and you have english and spanish as languages. everything you need is included filemanager app2sd etc. i like it very much.. thanks.
edit: could you kindly tell what the flashing of the bios (with pc) exactly is for?! thanks
If you dont flash that bios you cant wiPe devilk cache and you cant instal modified rom so basicly puting new bio is must for moded roms
It will be great if someone else can try this
As for wiping the data, there was only one thing possible to wipe. everything else was just a line of "NO" without option to change it.
I now have like 3 programs running in background thats cool... and of course its cool that many programs are removed that cant be removed otherwise (like documents2go trial)
But thE stock yoigo firmware is good too... It already comes with the possibility to install apps to SD u dont need extra program for that
EDIT :and i just come back to phone.. i left it on charger over night.. and its in the orange BIOS MODE !!!! so it crashed i guess ??? bad
EDIT2: Couldnt access 3g internet even tho i had the right profile .... will test some more
Unofrtunately the custom ROM has still a lot of bugs, be careful :-(
yeah its BS... i am going back to original yoigo at least there i can make it install all aps to SD automatically .... this hacked firmware cant even transfer most new aps to SD..
i hope i will have no problems cos of flashed bios...
thanks anyways both of you
edit: 2 more bugs.. adblock dont work (some java error crash) and the 11mb adobe flash cant be copied to sd or removed at all
out of 27 apps (a few downloaded by me) 7 can be copied to SD and 20 cant
is there anyone who tested cyan mode for this phone ?
this guy
http://translate.google.de/translat...ania.com/showthread.php?p=2880783#post2880783
check that forum out they also have Cyanogen7.2-benru89 [Android 2.3.7] [LEDs] !!
do anybody knows how to make back key to just leave app and not go to home screen
i have instaled cyan 7.2 spartan 1.2 ver and when i enter app drawer and start app lasts say camera i push back key and it lands me in home screen and not in appdrawer.
hope you understand what i am saying
problem
I had a problem when i tried to root my phone. I copyed the zip file into my sdcard but it could find the file.
I got other things in my sd if it matters idont know.
I would be very thankfull if someone could help me!
huawei u 8650 phone is dead
hi ,after installing official firmware ,my phone got brick.i also made backup with cwm recovery,but now my phone only show black screen only alittle blink of light when i push power bottom,how can i solve this problem
I don't understand, if you root your phone yo unlock it from its carrier? I mean, free to use with whatever sim card from any mobile company?
Didnot work on U8652
12/14/11: I tried the rom upgrade on U8652 ATT fusion and received "install error' after unpacking.
Any suggestions?
12/15/11: I successfully installed the 'recoveryclockmod' after finding the proper android usb driver for winXp - 'pulse drivers'
then installed the custom rom. But the phone details on the installed custom rom says its a U8650 model not U8652.
Thanks OP
Thanks OP
I followed your instructions and installed recoveryclockmod and cyanogen_u8650-benru on my U8652. Now I finally have root and a nice ROM to play around with. Thanks OP
Does the root part work on a Huawei U8650 Sonic that came with android 2.3.5 and newer ROM ( U8650V100R001C343B851 ) ?
I need to root it to be able to use reverse USB tethering
dark0153 said:
Does the root part work on a Huawei U8650 Sonic that came with android 2.3.5 and newer ROM ( U8650V100R001C343B851 ) ?
I need to root it to be able to use reverse USB tethering
Click to expand...
Click to collapse
Try with
http://unlockroot.com/
From lastest version they support huawei U8650. You can always put recovery and custom rom (google htcmania or read first post)
sipe1 said:
Try with
unlockroot.com
From lastest version they support huawei U8650. You can always put recovery and custom rom (google htcmania or read first post)
Click to expand...
Click to collapse
unlockroot doesn't work, i tried the latest version (2.2) and i get the same error "Failed to get shell root !"
I have fried my U8650
I attempted a firmware update (official)... stage one completed... phone restarted and got stuck with a grey screen (no logo nothing just blank grey screen) all the soft buttons are turned on. constantly.
It wont go in to recovery, a simple touch to the power button turns it on and then it wont turn off unless I take the battery out.
I tried flashing with DC unlocker but my system wont detect it, I have installed the drivers provided at huawei site.
the phone was just a week old and am real pissed.
worst part, i did all that after reading this post
Anyone has any idea, how i can get it to work once again.
friedroid said:
I attempted a firmware update (official)... stage one completed... phone restarted and got stuck with a grey screen (no logo nothing just blank grey screen) all the soft buttons are turned on. constantly.
It wont go in to recovery, a simple touch to the power button turns it on and then it wont turn off unless I take the battery out.
I tried flashing with DC unlocker but my system wont detect it, I have installed the drivers provided at huawei site.
the phone was just a week old and am real pissed.
worst part, i did all that after reading this post
Anyone has any idea, how i can get it to work once again.
Click to expand...
Click to collapse
I didn't try this method and I'm only suggesting it because it sound like you almost bricked your phone.
You could try installing ClockworkMod recovery using fastboot (here is a guide for that androidforums.com/sonic-all-things-root/476263-root-guide.html just follow 1-9 ) and then flash the original rom for your phone (I found a list of stock roms here android.modaco.com/topic/350367-huawei-u8650 )
Dont forget to wipe data/cache before flashing the new rom ( this might be the cause for the state your phone is in now )
Update:
Got the drivers by installing hi space and letting it search for appropriate drivers. Worked real smooth.
Now Computer detects phone. But the instalador.bat keeps on searching for device :S
Stuck and stumped once again.
I want to believe but all I see is darkness... or a mildly lit lcd with greyness to be precise. thoughts, ideas anyone.
Thanks man. A ray of hope finally.
Only one problem.
My system won't detect the phone. When i plug it in via usb, it turns on. I mean all the buttons turn on, screen turns dark grey from dead black. But that is it. Computer wont detect it. I am running on windows 7.
Another system detected it which was running on XP but it wouldn't accept the drivers.

[Q] how to test touchscreen with adb

Hello, all ROM makers, developers, hackers and advanced users.
I have a problem and hope you can give me some good advice.
Here is my sad story
You can read the full description if you want. Or you can skip it - the main question in the end of this post..
I have bought a new Sony ericsson Live! with walkman (wt19i) phone during my newyear holydays in Prague. It seemd to be working fine.
It is from rev.3, manufacture date 11/49 (mounth/week)
When I came back home and started using it, I saw that after some inactivity period (about couple hours or maybe more) the touch screen, back and menu snsor buttons stops any responsing. Hardware buttons (home, volume, camera, walkman and power) are still working. The system also continues to work as usual, so I can turn it on (but can not slide to unlock), I can hear if somebody calls me (but can not answer). Alarms, notifications and all another functions are still working.
Once or twise it started to work again (by itself, without any actions by me) but after few time the problem repeated. I was very unhappy and sure it was a hardware problem (and of course the Czech warranty does not work in Russia), but now i'm not so sure.
The phone had 4.0.2.A.0.58 firmware (android 2.3.4) from the box. First of all I tried to install SE PC Companion software, connect phone with usb and make factory reset... touchscreen started to work! But soon I saw this problem again.
The next day a new update was released and installed it (firmware .62). My phone was working again, but with the same result after some time.
You shoud know, that simple softreset (or ejecting and inserting battery) has absolutesy no effect on problem. After system starts I can not even unlock it. But flashing a new (or even the same) firmware (with flash tool or SE PCC) makes touchscreen and buttons working for some time. Have no idea why, but installing ROM with CWM (even with full wipe) does not make touch working.
Then I tried to use another custom kernels and ROMs. I unlocked the bootloader with fastboot tool, flashed one of custom ROMs from this forum (pre-rooted and with CWM). Then tried to use CM7.2 ROM... then another kernel and another ROM. Official, official-based, totally unofficial. The problem was with me each time after couple hours
I thought it is because some troubles in lock screen. Tried to install "no lock" app, so my phone did not use lock... but after some time touch freezes in home screen.
I disabled screen off while charging in settings and tried to leave the phone "wired" for some time... actually it worked fine all the time, and when I dicsonnected it it was still working... for couple hours.
I tried to install "no sleep" applications that does not allow CPU and screen to suspend. But it have no influense.
I even flashed CM9.0 ICS (very) beta ROM with the same result.
If it is just hardware problem - why it solves (for some time, but solves) with flashing? If it is a software problem - why it doesnt solve with new kernels and ROMs? My brain is ready to explode.
Now I have only one last idea and ask you to help me.
The question is:
How can I use adb or adb shell comands to get more information about the problem with touch?
I saw there is some log (logcat, stderr) tools, debug tools. I saw working lsmod, dmesg and mount commands in shell.
I think I shoud get all this information when all is ok. And then get it again when touch stops working and then compare, is it a good idea?
Where exactly shoud I see? How to test or get some touch input device info with adb? Is there any item in /dev that i can explore? Or something in dmesg? Where are touch driver located and how can I check if it is working?
I have some basic linux and andriond skills, but have not enought expierence.
I very (VERY) hope somebody can give me any useful advice to continue solving the problem. Where to see, what to do?
Thank you
P.S.: and sorry for mistakes, of course. English is not my native language.
P.P.S.: i am not sure where is the best place for this question: here or in xperia subforums. But I decided that this question is not xperia-specific and can be useful for other people in future.
Anybody? I have Lenovo Yoga B6000 with touchscreen problem and will be good if anyone know how can i test TS through ADB or shell.

[Q] Need an Experts help

Help!
I have a unlocked AT&T Motorola Backflip (I know its old) and have been trying to install Android 2.3.7 CyanogenMod7. I go through making a recovery image and use Superuser to do a Wipe All. I then flash from the SDcard the zipped file. Everything appears to work fine. After the reboot the phone comes up in the Home page where I can see the apps ect. The issue is that when the phone goes to sleep or restarts I am at the initial power up screen ( where you would select phone, home or return). It is at this point that the home button fails to do anything. I get a short vibration indicating that the phone recognizes I have pushed the button but nothing else happens. When I restore the recovery image everything works fine.
It appears that the link between the home button and the location of the home page is missing.
I would really appreciate expert advice on how to proceed.
Thanks
Ram
CyanogenMod 7.1 mapping
Thanks for the information. If I may pose a follow-up. Based on my description, do you think there is different mapping with Android 2.1.1 and Andriod 2.3.7?
Also, is there a way to tell what mapping is being used in Android 2.3.7 or CyanogenMod7?
I appreciate you help.

Categories

Resources