So i unrooted my phone. And flashed true stock firmware for the vibrant via ODIN, it said PASS,and completed at the bottom.But now all it shows is a black screen. It loads up normal, passes the vibrant screen, after that its just a black screen. Any suggestions on how to fix this? also when it boots into recovery it says ''DATA WIPE FAILED''
I would like to ask what stock rom or nanroid did you flash? Was it original stock and what pit file in odin?
Yea, i found out i flashed over Bionix rom & didn't disable VOODOO lag fix..So i searched a bit more after posting and found the problem..
Flash the froyo rom through odin then flash back to stock. That will fix your issue.
^^^ to be more specific flash "eugene's froyo that doesn't brick" ROM, then the true stock.
esebrown23 said:
Yea, i found out i flashed over Bionix rom & didn't disable VOODOO lag fix..So i searched a bit more after posting and found the problem..
Click to expand...
Click to collapse
Hey, i'm experiencing the same exact problem.
can you please share your wisdom with details?
thx
Related
I flashed the accurate battery mod with the ji6 update and now it won't boot. I'm stuck in force closes during the boot process. I downloaded the stock battery file to my pc, but can't figure out how to get it on the sd card. currently I am able to boot into recovery mode, but it won't let me access my files to put the stock battery zip back on the phone. Can someone please help me with this
jstein222 said:
I flashed the accurate battery mod with the ji6 update and now it won't boot. I'm stuck in force closes during the boot process. I downloaded the stock battery file to my pc, but can't figure out how to get it on the sd card. currently I am able to boot into recovery mode, but it won't let me access my files to put the stock battery zip back on the phone. Can someone please help me with this
Click to expand...
Click to collapse
should have read to see if it's compatible with JI6 before flashing
you need to flash back to stock with Odin
flash froyo from euguene that won't brick with odin then downgrade to ji6 i suggest you after you downgrade flash bionix 1.7 with ji2 modem is the best rom and fastest out there
Intel_x said:
flash froyo from euguene that won't brick with odin then downgrade to ji6 i suggest you after you downgrade flash bionix 1.7 with ji2 modem is the best rom and fastest out there
Click to expand...
Click to collapse
why?
just reflash JI6 with Odin
problem fixed
his framework file is ****ed up, that's it
hydrogenman said:
should have read to see if it's compatible with JI6 before flashing
you need to flash back to stock with Odin
Click to expand...
Click to collapse
I was told in another thread that it should work. Do I need to flash back to stock, couldn't I just put the stock battery back on to essentially undo what I did?
hydrogenman said:
why?
just reflash JI6 with Odin
problem fixed
his framework file is ****ed up, that's it
Click to expand...
Click to collapse
That worked! thanks for the help
Re-Boot to "Recovery Mode" and "Wipe" Menu 3, 4
then reboot the phone again. It's work for me.
Please post questions in the Q&A forum or as part of the thread in which you found the item that caused the problem. This keeps the development forum from getting crowded.
Thread moved.
As far as modifications to the themes or anything else related to the framework, they tend to be VERY framework specific and frameworks change on each ROM version.
Sorry for being a noob.
but i install the voodoo lag fix through recovery mode and it stucked at vibrant/samsung loading page for 30 mins..i think something is not right..
i pull the battery. and reinstalled it. it stays in vibrant/samsung loading page now.
i tried recovery mode wipe all data...nothing work.
then i tried flash the origianl stock rom and it stucks...
i tried odin flashed the voodoo again...nothing works..
what should i do?should i flash another rom?
We'll need some more background on your current setup.
What Rom are you flashing Voodoo on and which voodoo are you flashing? You need to pick a voodoo that closest matches what the Rom is built on.
When flashing voodoo through clockwork, do you hear Linda? She should be telling you what progress you're making. It does take a bit of time so if you're hearing her then be patient.
Head on over to the developer section and flash Axura 2.2.5.7 which comes with voodoo. Easy peasy.
i m running stock tmobile 2.1 rom
download the Voodoo lagfix-only 3.0 Update.zip
i dont hear linda.
i am flashing the stock kernel and rom right now ..
waiting to see the out come after flash...
and i have a samsung captivate as well..
i know the processes of linda..
vibrant is not my phone..so...i really worried..
ok..stock kernal flashed..
stock rom flashed..
loading the tmobile and galaxys start page..then run into black screen.
chaolanren said:
ok..stock kernal flashed..
stock rom flashed..
Click to expand...
Click to collapse
Well lets get the phone working again first.
Did you use the .512 .pit and JFD .tar for a Vibrant?
yes i am flashing with 512 and stock rom.
i will try custom now..
From what I'm gathering the 3.0 voodoo update.zip is for the I9000 and not specifically for the Vibrant. I can't seem to find any Vibrant Eclair voodoo kernals.
Here's Supercurio's post for Vibrant Kernals Link. All of these are 2.2 Froyo Kernals.
Just to be clear that you got the true stock firmware read Here.
I personally would try any custom Roms until you get back to stock.
did i break my kernel or baseband?
i flahsed the true roms.....it is just not getting into the home page..
chaolanren said:
did i break my kernel or baseband?
i flahsed the true roms.....it is just not getting into the home page..
Click to expand...
Click to collapse
Try to flash them again using the link above.
Make sure you have Odin 1.3 or greater as well. 1.0 is known to be buggy.
I believe you broke your Kernal.
Try to download the files I linked to make sure yours aren't corrupt.
You can always try Eugene's froyo that doesn't brick. I can't find it on XDA at this time though...
EDIT - Here's working .pit and .tar stock files.
512.pit
T959UVJFD.tar
Hey drew if im out of line I apologize. But he said he had a captivate. Would the firmware be the same for our vibrants and the cappy.
Powered by Axura with a dash of Voodoo
thx bro,
trying again..even i use the same files..
but i realize i used odin 1.0 the 2nd time..
using 1.3 again to see.
he said it was stuck on the vibrant screen then he is also saying that he doesn't have a vibrant. Maybe he's flashing the wrong .tar that's why odin isn't working.
dude what's really your phone?
i m working on vibrant.
i m flashing vibrant rom on virbrant.
i have a captive. nothing to do with this
flashed again.. still black screen. after tmobile/samsung logo.
try to use this.
http://forum.xda-developers.com/showthread.php?t=790026
did you try checking the re-partitions?
i used 1.3 odin
and tried re-partitions.
well..i think...i need to try flash custom rom
can anybody tell me which rom i can flash through odin?
i see all rom manager ones..
This is Eugene's Froyo that doesn't brick.
http://www.4shared.com/file/dJiyRz3v/EUGENE373_SamsungS_Froyo_PDA.htm
But wait for the suggestions of others before you flash this. Literally, how many minutes are you waiting for when it boots?
about half hour now..
iynfynity said:
This is Eugene's Froyo that doesn't brick.
http://www.4shared.com/file/dJiyRz3v/EUGENE373_SamsungS_Froyo_PDA.htm
But wait for the suggestions of others before you flash this. Literally, how many minutes are you waiting for when it boots?
Click to expand...
Click to collapse
this is for vibrant right?‘
also i see this is zip. does it include tar inside? thx
Ok, I was restoring my phone to stock with odin following these stpes
Disable Voodoo
Odin to eugenes froyo that wont brick
sticks at vibrant screen
tried odining to JFD
odin completes but still hangs at the vibrant screen
I have tried with and with out repartition checked and I am able to enter and exit download mode freely, I have tried 3 differnt versions of odin and 2 different downloads of the pda and pits. Any help would be great.
EDIT, Odin is finishing at the pass stage when the phone attempts to boot Currently flashing the JI6 seeing if it works.
Still not getting anywhere, I have now tried to odin to eugenes froyo, JFD, JI6, all which end the same with out a boot screen, I can get download but no recovery.
From my understanding when you flash eugenes froyo that wont brick the boot animation should change to the international one, mine has not done that so I am starting to wonder if there is an issue with the flashes themself.
How long did you wait after flashing the stock firmware? The first boot usually takes a while after an Odin. Did Odin finish flashing everything to the point that it said restart in blue?
You can find instructions to revert to stock http://forum.xda-developers.com/showthread.php?t=734475
I've gotten myself out of some pretty bad "bricks" with JFD and ODIN... make sure you also use the stock .pit file and you can check repartition, use JFD and should fix you right up.
I have waited for 10-15 minutes after it says restart and then sometimes after it says pass, and I have done to jfd and stock pit.
left phone at boot fell asleep woke up hr or so later still at vibrant screen, still cannot access recovery but can access download mode.
To OP. What custom rom did you run before flashing back to stock? Have you recovered?
iynfynity said:
To OP. What custom rom did you run before flashing back to stock? Have you recovered?
Click to expand...
Click to collapse
I was on axura the newest one and did not like it that much tbh had tons of processes starting nonstop and was constantly down to 35m of memory while idle. No I have not recoverd, I have flashed every combo I can think of with ODIN but alas have had no luck.
Currently it is being warrantied out for a free replacement.
ionic7 said:
I was on axura the newest one and did not like it that much tbh had tons of processes starting nonstop and was constantly down to 35m of memory while idle. No I have not recoverd, I have flashed every combo I can think of with ODIN but alas have had no luck.
Currently it is being warrantied out for a free replacement.
Click to expand...
Click to collapse
orage
So tired.... I am in the same boat. But I get to flash Eugenes froyo but i have 0 room in app storage. Then When I try to Odin to stock JFD and stock .pit it all goes well untill I get to recovery and it tells me in red text "data wipe failed"
The phone reboots and goes black after the galaxy s animation.
You think samsung will fix it for me? I go the phone in July 2010.
To OP.
have you tried flashing eugenes froyo that doesn't brick? I can't understand why a lot of these bricks are happening right now. Especially when you do flash your phone back to stock.
iynfynity said:
To OP.
have you tried flashing eugenes froyo that doesn't brick? I can't understand why a lot of these bricks are happening right now. Especially when you do flash your phone back to stock.
Click to expand...
Click to collapse
Yes read the first post it says what i have flashed.
Charlie Brown said:
orage
So tired.... I am in the same boat. But I get to flash Eugenes froyo but i have 0 room in app storage. Then When I try to Odin to stock JFD and stock .pit it all goes well untill I get to recovery and it tells me in red text "data wipe failed"
The phone reboots and goes black after the galaxy s animation.
You think samsung will fix it for me? I go the phone in July 2010.
Click to expand...
Click to collapse
How would I know if samsung will fix it.. I called tmobile said it got bricked while doing JI6 boom problem solved. Their support is not that great though he was having me try to access root by calling it a secert master menu, then asked if i tethered my comp to it but his definition of tether was syncing files I was just playing dumb and letting him ask me his questions
ionic7 said:
How would I know if samsung will fix it.. I called tmobile said it got bricked while doing JI6 boom problem solved. Their support is not that great though he was having me try to access root by calling it a secert master menu, then asked if i tethered my comp to it but his definition of tether was syncing files I was just playing dumb and letting him ask me his questions
Click to expand...
Click to collapse
Rooting your device and flashing custom roms onto it voids your warranty from t-mobile. You are wasting your time trying to see if they will help, This is NOT in their job description. They might laugh at you.
@OP Try flashing to a TRUE stock firmware, I personally would not flash from a custom rom to another custom rom, does that make sense? You should go back to t-mobiles legit 2.1. There is a link in the Bible here under the Dev forum. But, The link is broken. So Ive uploaded it here http://www.mediafire.com/?8kw71bx06an0vwg
Don't give up on odin yet, try things like changing your usb ports on the computer, this has worked for me. I also have a video tutorial using odin, it might be of some help to you. http://forum.xda-developers.com/showpost.php?p=10207377&postcount=1
Good luck!
ionic7 said:
Yes read the first post it says what i have flashed.
Click to expand...
Click to collapse
try that again.
Sent from my SGH-T959 using XDA App
Im having the same issue with, "Data Wipe Failed" and have 0.00 space in Application storage but my phone reboots into eugenes 2.2 perfectly fine and works, but the application storage seems to be empty still...very frustrating.
cvibe88 said:
Rooting your device and flashing custom roms onto it voids your warranty from t-mobile. You are wasting your time trying to see if they will help, This is NOT in their job description. They might laugh at you.
@OP Try flashing to a TRUE stock firmware, I personally would not flash from a custom rom to another custom rom, does that make sense? You should go back to t-mobiles legit 2.1. There is a link in the Bible here under the Dev forum. But, The link is broken. So Ive uploaded it here http://www.mediafire.com/?8kw71bx06an0vwg
Don't give up on odin yet, try things like changing your usb ports on the computer, this has worked for me. I also have a video tutorial using odin, it might be of some help to you. http://forum.xda-developers.com/showpost.php?p=10207377&postcount=1
Good luck!
Click to expand...
Click to collapse
have changed usb cord, port, computer, have flashed jfd ji6 froyo that wont brick, 512 pit,513 pit,and they have not laughed at me in anyway they are sending my new phone now and a g2 to try out soo either way I have something soon. I also was going from axura to stock to a custom rom not from one to the other and I do know how to use odin, I know what I am doing just need help figuring this one out has to be something im missing or its just not gonna work. 50 odins and nothing kinda says it all.
I am in the same boat.. tried ODIN + stock ROM from various sources, nothing seems to work.. am I out of luck ??
I have seen numerous of threads with this same question, but no answer. The issue I have is that my Vibrant has BOTH the I9000 boot image and stock Vibrant image. I9000 comes on for about 2 seconds then the stock Vibrant image comes on. I've tried Odin back to stock JFD and the rom flashed successful, but the boot image won't change. I've read that it doesn't matter what rom you use itsilk not touch the bootloader image. Do any one know the necessary steps to erase the I9000 image and just keep the stock image?
The only reason I need the stock image is because I'm sending my Vibrant in for a new one and I don't want to be charged for tampering with this one. Please help me out. Thanks.
Sent from my SGH-T959 using XDA App
sounds like you flashed a I9K rom that had the I9K sbl.bin in the updates folder.
You need to look through the vibrant bible and flash the Vibrant sbl.bin.
This will fix your issue.
Thank you very much, I will try this soon as I get home. Where/how do I go about doing this? Use Odin? If which to use PDA, PHONE, CSC, or PIT? Also do I tick PHONE BOOTLOADER UPDATE? Thank you very much.
Btw I did not flash an I9000 rom. I used this so called 3 button fix and I guess it only works for the I9000.
Sent from my SGH-T959 using XDA App
there is a CWM flashable fix in the bible.
The 3button fix is what caused your issue. you flashed the one for the i9k, not the vibrant.
All it is, is a sbl.bin from a working phone.
OuncE718 said:
I have seen numerous of threads with this same question, but no answer. The issue I have is that my Vibrant has BOTH the I9000 boot image and stock Vibrant image. I9000 comes on for about 2 seconds then the stock Vibrant image comes on. I've tried Odin back to stock JFD and the rom flashed successful, but the boot image won't change. I've read that it doesn't matter what rom you use itsilk not touch the bootloader image. Do any one know the necessary steps to erase the I9000 image and just keep the stock image?
The only reason I need the stock image is because I'm sending my Vibrant in for a new one and I don't want to be charged for tampering with this one. Please help me out. Thanks.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
Have you found a fix for this yet? I'm having the same issue
Has anybody found a solution to this problem? I'm having the same issue.
Other threads say that the i9000 bootloaders overwrote the vibrant ones and that they are not included in the files when you odin back to stock jfd. (The files are boot.bin and sbl.bin). AND I also heard that those files aren't going to be found anywhere because they were hardware encrypted?
What vibrant rom can I flash to that overwrites boot.bin and sbl.bin, which will not brick my phone?
Eugene's JK2 froyo...not the one that doesn't brick...
I accidentally flashed a international GTI9100 rom and lost my original deep dark colors. The tint is a lot lighter and yellow/green. I have looked everywhere to find a solution and have used the restore thread and everything is back perfectly except the awesome color the AMOLED screen. HELP PLEASE!!
Have you tried to wipe it all and flash a stock ROM?
QuarkZ26 said:
Have you tried to wipe it all and flash a stock ROM?
Click to expand...
Click to collapse
Yes but still no luck. I used odin or whatever to ref lash the stock rom and modem.
I do remember using odin and flashing the modem, pda, and the CSC? I've reflashed the modem and pda but I haven't seen a CSC file anywhere for this phone? Could that maybe be it?
Same thing happened to me yesterday when i tried rooting my phone and i used the uks version software thinking it would be the same ... go to the frequently asked questions part here and go where it says root and download the right software for your phone which is the one that ends in UCKH7 ... and run it thru odin ... thats it ... mine lost its tint and i couldnt hear anyone when they called me, and my back button didnt work ... but this fixed it