Vibrant voodoo bricked help - Vibrant Q&A, Help & Troubleshooting

Sorry for being a noob.
but i install the voodoo lag fix through recovery mode and it stucked at vibrant/samsung loading page for 30 mins..i think something is not right..
i pull the battery. and reinstalled it. it stays in vibrant/samsung loading page now.
i tried recovery mode wipe all data...nothing work.
then i tried flash the origianl stock rom and it stucks...
i tried odin flashed the voodoo again...nothing works..
what should i do?should i flash another rom?

We'll need some more background on your current setup.
What Rom are you flashing Voodoo on and which voodoo are you flashing? You need to pick a voodoo that closest matches what the Rom is built on.
When flashing voodoo through clockwork, do you hear Linda? She should be telling you what progress you're making. It does take a bit of time so if you're hearing her then be patient.
Head on over to the developer section and flash Axura 2.2.5.7 which comes with voodoo. Easy peasy.

i m running stock tmobile 2.1 rom
download the Voodoo lagfix-only 3.0 Update.zip
i dont hear linda.
i am flashing the stock kernel and rom right now ..
waiting to see the out come after flash...

and i have a samsung captivate as well..
i know the processes of linda..
vibrant is not my phone..so...i really worried..

ok..stock kernal flashed..
stock rom flashed..
loading the tmobile and galaxys start page..then run into black screen.

chaolanren said:
ok..stock kernal flashed..
stock rom flashed..
Click to expand...
Click to collapse
Well lets get the phone working again first.
Did you use the .512 .pit and JFD .tar for a Vibrant?

yes i am flashing with 512 and stock rom.
i will try custom now..

From what I'm gathering the 3.0 voodoo update.zip is for the I9000 and not specifically for the Vibrant. I can't seem to find any Vibrant Eclair voodoo kernals.
Here's Supercurio's post for Vibrant Kernals Link. All of these are 2.2 Froyo Kernals.
Just to be clear that you got the true stock firmware read Here.
I personally would try any custom Roms until you get back to stock.

did i break my kernel or baseband?
i flahsed the true roms.....it is just not getting into the home page..

chaolanren said:
did i break my kernel or baseband?
i flahsed the true roms.....it is just not getting into the home page..
Click to expand...
Click to collapse
Try to flash them again using the link above.
Make sure you have Odin 1.3 or greater as well. 1.0 is known to be buggy.
I believe you broke your Kernal.
Try to download the files I linked to make sure yours aren't corrupt.
You can always try Eugene's froyo that doesn't brick. I can't find it on XDA at this time though...
EDIT - Here's working .pit and .tar stock files.
512.pit
T959UVJFD.tar

Hey drew if im out of line I apologize. But he said he had a captivate. Would the firmware be the same for our vibrants and the cappy.
Powered by Axura with a dash of Voodoo

thx bro,
trying again..even i use the same files..
but i realize i used odin 1.0 the 2nd time..
using 1.3 again to see.

he said it was stuck on the vibrant screen then he is also saying that he doesn't have a vibrant. Maybe he's flashing the wrong .tar that's why odin isn't working.
dude what's really your phone?

i m working on vibrant.
i m flashing vibrant rom on virbrant.
i have a captive. nothing to do with this
flashed again.. still black screen. after tmobile/samsung logo.

try to use this.
http://forum.xda-developers.com/showthread.php?t=790026
did you try checking the re-partitions?

i used 1.3 odin
and tried re-partitions.
well..i think...i need to try flash custom rom

can anybody tell me which rom i can flash through odin?
i see all rom manager ones..

This is Eugene's Froyo that doesn't brick.
http://www.4shared.com/file/dJiyRz3v/EUGENE373_SamsungS_Froyo_PDA.htm
But wait for the suggestions of others before you flash this. Literally, how many minutes are you waiting for when it boots?

about half hour now..

iynfynity said:
This is Eugene's Froyo that doesn't brick.
http://www.4shared.com/file/dJiyRz3v/EUGENE373_SamsungS_Froyo_PDA.htm
But wait for the suggestions of others before you flash this. Literally, how many minutes are you waiting for when it boots?
Click to expand...
Click to collapse
this is for vibrant right?‘
also i see this is zip. does it include tar inside? thx

Related

[Q] Flashed Stock Firmware via ODIN

So i unrooted my phone. And flashed true stock firmware for the vibrant via ODIN, it said PASS,and completed at the bottom.But now all it shows is a black screen. It loads up normal, passes the vibrant screen, after that its just a black screen. Any suggestions on how to fix this? also when it boots into recovery it says ''DATA WIPE FAILED''
I would like to ask what stock rom or nanroid did you flash? Was it original stock and what pit file in odin?
Yea, i found out i flashed over Bionix rom & didn't disable VOODOO lag fix..So i searched a bit more after posting and found the problem..
Flash the froyo rom through odin then flash back to stock. That will fix your issue.
^^^ to be more specific flash "eugene's froyo that doesn't brick" ROM, then the true stock.
esebrown23 said:
Yea, i found out i flashed over Bionix rom & didn't disable VOODOO lag fix..So i searched a bit more after posting and found the problem..
Click to expand...
Click to collapse
Hey, i'm experiencing the same exact problem.
can you please share your wisdom with details?
thx

[Q] Stuck at vibrant screen after odin

Ok, I was restoring my phone to stock with odin following these stpes
Disable Voodoo
Odin to eugenes froyo that wont brick
sticks at vibrant screen
tried odining to JFD
odin completes but still hangs at the vibrant screen
I have tried with and with out repartition checked and I am able to enter and exit download mode freely, I have tried 3 differnt versions of odin and 2 different downloads of the pda and pits. Any help would be great.
EDIT, Odin is finishing at the pass stage when the phone attempts to boot Currently flashing the JI6 seeing if it works.
Still not getting anywhere, I have now tried to odin to eugenes froyo, JFD, JI6, all which end the same with out a boot screen, I can get download but no recovery.
From my understanding when you flash eugenes froyo that wont brick the boot animation should change to the international one, mine has not done that so I am starting to wonder if there is an issue with the flashes themself.
How long did you wait after flashing the stock firmware? The first boot usually takes a while after an Odin. Did Odin finish flashing everything to the point that it said restart in blue?
You can find instructions to revert to stock http://forum.xda-developers.com/showthread.php?t=734475
I've gotten myself out of some pretty bad "bricks" with JFD and ODIN... make sure you also use the stock .pit file and you can check repartition, use JFD and should fix you right up.
I have waited for 10-15 minutes after it says restart and then sometimes after it says pass, and I have done to jfd and stock pit.
left phone at boot fell asleep woke up hr or so later still at vibrant screen, still cannot access recovery but can access download mode.
To OP. What custom rom did you run before flashing back to stock? Have you recovered?
iynfynity said:
To OP. What custom rom did you run before flashing back to stock? Have you recovered?
Click to expand...
Click to collapse
I was on axura the newest one and did not like it that much tbh had tons of processes starting nonstop and was constantly down to 35m of memory while idle. No I have not recoverd, I have flashed every combo I can think of with ODIN but alas have had no luck.
Currently it is being warrantied out for a free replacement.
ionic7 said:
I was on axura the newest one and did not like it that much tbh had tons of processes starting nonstop and was constantly down to 35m of memory while idle. No I have not recoverd, I have flashed every combo I can think of with ODIN but alas have had no luck.
Currently it is being warrantied out for a free replacement.
Click to expand...
Click to collapse
orage
So tired.... I am in the same boat. But I get to flash Eugenes froyo but i have 0 room in app storage. Then When I try to Odin to stock JFD and stock .pit it all goes well untill I get to recovery and it tells me in red text "data wipe failed"
The phone reboots and goes black after the galaxy s animation.
You think samsung will fix it for me? I go the phone in July 2010.
To OP.
have you tried flashing eugenes froyo that doesn't brick? I can't understand why a lot of these bricks are happening right now. Especially when you do flash your phone back to stock.
iynfynity said:
To OP.
have you tried flashing eugenes froyo that doesn't brick? I can't understand why a lot of these bricks are happening right now. Especially when you do flash your phone back to stock.
Click to expand...
Click to collapse
Yes read the first post it says what i have flashed.
Charlie Brown said:
orage
So tired.... I am in the same boat. But I get to flash Eugenes froyo but i have 0 room in app storage. Then When I try to Odin to stock JFD and stock .pit it all goes well untill I get to recovery and it tells me in red text "data wipe failed"
The phone reboots and goes black after the galaxy s animation.
You think samsung will fix it for me? I go the phone in July 2010.
Click to expand...
Click to collapse
How would I know if samsung will fix it.. I called tmobile said it got bricked while doing JI6 boom problem solved. Their support is not that great though he was having me try to access root by calling it a secert master menu, then asked if i tethered my comp to it but his definition of tether was syncing files I was just playing dumb and letting him ask me his questions
ionic7 said:
How would I know if samsung will fix it.. I called tmobile said it got bricked while doing JI6 boom problem solved. Their support is not that great though he was having me try to access root by calling it a secert master menu, then asked if i tethered my comp to it but his definition of tether was syncing files I was just playing dumb and letting him ask me his questions
Click to expand...
Click to collapse
Rooting your device and flashing custom roms onto it voids your warranty from t-mobile. You are wasting your time trying to see if they will help, This is NOT in their job description. They might laugh at you.
@OP Try flashing to a TRUE stock firmware, I personally would not flash from a custom rom to another custom rom, does that make sense? You should go back to t-mobiles legit 2.1. There is a link in the Bible here under the Dev forum. But, The link is broken. So Ive uploaded it here http://www.mediafire.com/?8kw71bx06an0vwg
Don't give up on odin yet, try things like changing your usb ports on the computer, this has worked for me. I also have a video tutorial using odin, it might be of some help to you. http://forum.xda-developers.com/showpost.php?p=10207377&postcount=1
Good luck!
ionic7 said:
Yes read the first post it says what i have flashed.
Click to expand...
Click to collapse
try that again.
Sent from my SGH-T959 using XDA App
Im having the same issue with, "Data Wipe Failed" and have 0.00 space in Application storage but my phone reboots into eugenes 2.2 perfectly fine and works, but the application storage seems to be empty still...very frustrating.
cvibe88 said:
Rooting your device and flashing custom roms onto it voids your warranty from t-mobile. You are wasting your time trying to see if they will help, This is NOT in their job description. They might laugh at you.
@OP Try flashing to a TRUE stock firmware, I personally would not flash from a custom rom to another custom rom, does that make sense? You should go back to t-mobiles legit 2.1. There is a link in the Bible here under the Dev forum. But, The link is broken. So Ive uploaded it here http://www.mediafire.com/?8kw71bx06an0vwg
Don't give up on odin yet, try things like changing your usb ports on the computer, this has worked for me. I also have a video tutorial using odin, it might be of some help to you. http://forum.xda-developers.com/showpost.php?p=10207377&postcount=1
Good luck!
Click to expand...
Click to collapse
have changed usb cord, port, computer, have flashed jfd ji6 froyo that wont brick, 512 pit,513 pit,and they have not laughed at me in anyway they are sending my new phone now and a g2 to try out soo either way I have something soon. I also was going from axura to stock to a custom rom not from one to the other and I do know how to use odin, I know what I am doing just need help figuring this one out has to be something im missing or its just not gonna work. 50 odins and nothing kinda says it all.
I am in the same boat.. tried ODIN + stock ROM from various sources, nothing seems to work.. am I out of luck ??

need help quick cant figure out what is wrong?

so im trying to help my cousin out he wanted me to return his phone to stock because he was having issues with mms and gps. it was on one of the bionix roms i cant remember which version thou. so i was reading all this morning trying to figure out the best way to unroot and odin seemed to be the easiest. i followed this guide (http://forum.xda-developers.com/showthread.php?t=734475) and everything went perfect and when the phone began to boot it showed the 3 boot screens (samsung vibrant, pink stick together, then the blue one with the lil jingle that says galaxy s) and then the screen just goes black and nothing happens.. i have to take the battery out and i can still get into download mode and the android system recovery but idk what to do. ive tried redoing odin back to stock but always the same outcome. for the past 2 hours ive been non stop searching but cant find anything that will help if someone could shed some light on what i need to do that would be awesome. ty
I'll grab the link in a minute and post it for ya. You should try flashing eugene's froyo that doesnt brick via odin, let it reboot to recovery. Pull the battery, boot back to dl mode, then flash the stock jfd via odin selecting repartition the last flash. Be sure you can get to dl mode with the volume button- plug in usb method before flashing the froyo that doesnt brick, you'll need to boot back to dl mode that way after the battery pull.
Edit: http://eb-productions.proboards.com/index.cgi?board=samsungsgs&action=display&thread=8
Hope it helps
Sent from my Loki powered Vibrant on the XDA App
When the phone is rebooting how long does the screen stay black, after the first boot of changing a kernel or any system files the dalvik cache needs to be rebuilt and can take some time (upto 5 minutes) on the first boot. My suggestion is to make sure and use jfd tar file and 512 pit file and then just let the phone sit for about 15 minutes after odin says pass. Once you get a pass from odin the phone is going to work unless something in the tar or pit files was damaged. Just let the phone sit and all should be well.
thanks for the quick replys im going to try both suggestions now and ill get back to u when i find out if they work
Br1cK'd said:
I'll grab the link in a minute and post it for ya. You should try flashing eugene's froyo that doesnt brick via odin, let it reboot to recovery. Pull the battery, boot back to dl mode, then flash the stock jfd via odin selecting repartition the last flash. Be sure you can get to dl mode with the volume button- plug in usb method before flashing the froyo that doesnt brick, you'll need to boot back to dl mode that way after the battery pull.
Edit: http://eb-productions.proboards.com/index.cgi?board=samsungsgs&action=display&thread=8
Hope it helps
Sent from my Loki powered Vibrant on the XDA App
Click to expand...
Click to collapse
+1 this is the sure way to solve this problem
well thanks for both replys Br1ck'd ur method worked his phone is now back on stock! just one last thing how should i go about updating it to the latest stock rom. when i hit software update it says nothing is available. i know there is a newer eclair update but since i dont have a vibrant im not to sure what the latest is. i see there is a froyo update out there but has tmobile released an official that i can load on there for him? and how will i go about getting it?
dylan6879 said:
well thanks for both replys Br1ck'd ur method worked his phone is now back on stock! just one last thing how should i go about updating it to the latest stock rom. when i hit software update it says nothing is available. i know there is a newer eclair update but since i dont have a vibrant im not to sure what the latest is. i see there is a froyo update out there but has tmobile released an official that i can load on there for him? and how will i go about getting it?
Click to expand...
Click to collapse
The only official 2.2 we have for the vibrant wasnt released as an ota. You can snag it through Kies or KiesMini, but it was my understanding that it messed up some peoples sd cards. If youre looking for 2.2, and you want it as stock as possible, your best bet is to dl and flash one of Whitehawkx Ka6, KA7, or KB1 roms in the developement forum. My Loki build is 2.2, but far from stock, and we have a bunch of roms out here that are going to run better than any ota update.
Sent from my Loki powered Vibrant on the XDA App
Br1cK'd said:
The only official 2.2 we have for the vibrant wasnt released as an ota. You can snag it through Kies or KiesMini, but it was my understanding that it messed up some peoples sd cards. If youre looking for 2.2, and you want it as stock as possible, your best bet is to dl and flash one of Whitehawkx Ka6, KA7, or KB1 roms in the developement forum. My Loki build is 2.2, but far from stock, and we have a bunch of roms out here that are going to run better than any ota update.
Sent from my Loki powered Vibrant on the XDA App
Click to expand...
Click to collapse
+1 Loki Rules

Spent 12 hours and no go HELP ME PLEASE

Okay I used Baywolfs vibrant toolbox and odin back to 2.1, used samsung kies to upgrade back to 2.2 KA6....NOW I'm back to stock again. This is very frusterating. Is it this hard always to load a kernal......What is the best way to get this loaded on my phone.
I have tried CWM, but cant get it to get to green letters, there always BLUE
I have Odin supercurios KA6 with voodoo and twice it loads but say not enough partion space? But voodoo is enabled and I get red recovery. Then flash the Overstock zip which is on internal card. It loads but device hangs up after Samsung splash screen, even rebooting it does the samething.
Im at a loss...I need help
the drugstore said:
Okay I used Baywolfs vibrant toolbox and odin back to 2.1, used samsung kies to upgrade back to 2.2 KA6....NOW I'm back to stock again. This is very frusterating. Is it this hard always to load a kernal......What is the best way to get this loaded on my phone.
I have tried CWM, but cant get it to get to green letters, there always BLUE
I have Odin supercurios KA6 with voodoo and twice it loads but say not enough partion space? But voodoo is enabled and I get red recovery. Then flash the Overstock zip which is on internal card. It loads but device hangs up after Samsung splash screen, even rebooting it does the samething.
Im at a loss...I need help
Click to expand...
Click to collapse
Ok..i'm gonna try this again....this time i'll tell you what I would do...others may disagree..
1. Odin back to stock 2.1 and re-root
2. Download ROM Manager from market and flash CWM Recovery
3. Let it flash, when it reboots into stock recovery hit re-isntall packages...it'll reboot again and you should have CWM Recovery, if it does't then hit "Reinstall packages again and it'll send you straight there
4. Get a custom ROM (Bionix-V, Axura, Trigger, Loki,...etc..) and flash it....any of those will give you a VooDoo enabled kernel (a red one).....also you'll be on Android 2.2 if you use these ROMs....after that flash OverStock 1.4...
Like i said , you or others may disagree but this is what i would personally do.....like i said before i rarely see folks on stock....and its too much trouble (to me) to work from stock 2.2....this is just a suggestion...any others?
EDIT: Also...if you flash a red VooDoo enabled kernel....then expect it to hang a little and expect a robotic voice to talk to you...that would be Linda activating the VooDoo lagfix...it usually takes about 5 mins and she will tell you the progress
thats what I did
nomadrider123 said:
thats what I did
Click to expand...
Click to collapse
In your OP you stated you used Kies to flash KA6 2.2 after using Odin to flash 2.1. I believe that stock recovery from the Kies version won't work when trying to flash Clockwork, should give a file signature verification error when you hit reinstall packages. Instead of using Kies to flash KA6, flash this one: http://eb-productions.proboards.com/index.cgi?board=samsungsgs&action=display&thread=3
Eugene's KA6 Odin file has the modified 2e recovery that will allow you to flash Clockwork from stock recovery. Hope this helps.

[ROM][Radio][4.10.11]EC01

EC01 must be old, right? Not so. I cannot give you the build date however, per request of...someone else. Its considerably newer than EC10, however. For some it may be hard to take my word for it, but I have never lied to anyone here.
In here you will find a new shiny radio, a voodoo or non voodoo EC10 kernel, courtesy of JT1134, and...a ROM!
No more hacking pieces together from other devices. No more crappy radios (hopefully). No more poor GPS (hopefully).
Please do not ask where it came from. I will not tell you. All file dates have been changed, the build.prop has been masked.
Please do not ask for an Odin. I will not give you one at this time.
Please enjoy yourself, I insist.
This ROM is ever so slightly tweaked. It is not a quality release by my standards (mostly because its stock). I recommend folks wait for the community rom to be finished. If you can't wait, by all means, flash away.
Does not include a kernel.
Debinged, browser included.
Debloated, yet contains most stock apps.
Custom boot animation, because I am not including the original kernel.
Dialer voicemail button points to Google Voice.
Your current kernel will be retained. So if you are using a Froyo kernel, you will be just fine.
Xoom boot animation because you will be using a custom boot animation supporting kernel.
Installation Instructions (read carefully)
---------------------------------------------------------
Make a nandroid backup.
Odin back to EB01 stock.
http://adbdev.com/danknub/CI500_VZW_EB01_FROYO_REL.tar.md5
Boot once, then Odin clockwork recovery.
http://adbdev.com/danknub/cwm-recovery-ALL-3-30-FIX.tar
Boot straight to clockwork recovery, and flash my kernel of choice from here:
http://forum.xda-developers.com/showthread.php?t=1003017
Boot once, convert to voodoo if need be.
Boot back to clockwork recovery and flash rom.
Boot once, then Odin the radio.
Please follow these directions. There are apparently some kernel/cwr issues that are causing boot loops. If you decide to flash another kernel afterwards, be my guest. Don't wipe, however. The above directions are after hours of testing by IRC folks, and I THANK all of them!!!!!
Radio:
http://adbdev.com/danknub/ec01_radio.tar
Rom:
http://www.multiupload.com/ETEG610SJR
Reserved.
Edify compatible version coming out tomorrow.
<3 your the man
Much thanks man. You're always coming through for us. Thanks for continuing to work on the fascinate.
Sent from my SCH-I500 using XDA App
excellent work man, i new you werent going to give up on us, im gonna have to get the tbolt just so i can continue to use your work. ive been with your roms since my omnia
edit-kernal links are down, both of them.
NM me. I followed your post to a T and I was able to flash a diff kernel then. THanks guys
Great work! Thank you for the work. I'll take your advice and wait for the community rom, but VERY much appreciate your work.
jrobinsky said:
for me, only your kernel works dude. I tried a few other ones after my initial boot and i get stuck on boot loops. IDK about anyone else, but thats my results.
Click to expand...
Click to collapse
I was able to get times_infinity's comavolt voodoo to work, but only if I ODIN'd back to EB01 stock, then ODIN'd ec01 radio, ODIN 03/30 cwm fix, boot directly to recovery, flash ec01 rom, flash comavolt kernel, boot was successful. Going to play with it a bit tomorrow.......errr later today after I get some sleep.
Copied from my "Most Thorough Method of Fixing Every Problem You Might Have" section in the recovery thread, and adapted to this post.
This will wipe your data, btw, so be sure to backup any important info. You can make a nandroid backup, but you will probably have issues if you try to restore the data to use with this ROM.
[SIZE=+2]Bestest Best Way to Install This ROM[/SIZE]
Download to PC
CWM-Recovery 3-30 Odin Package
MD5 Checksum: 00e90e790a70e2d66b6cba6a152de504
ec01_radio.tar Odin Package
MD5 Checksum: 099c7cf67e14fea5c9bbd886a83e48b1
CI500_VZW_EB01_FROYO_REL.tar.md5
MD5 Checksum: d04733ce540ab1af291cfa44d42c768e
atlas_v2.2.pit
MD5 Checksum: a0eaf496375cf72b90f7ceef4f0a4538
Place on /sdcard
ec01_rom.zip
MD5 Checksum: 30849feb8d53b05c611fc9b03263a414
The kernel of your choice
Step-by-Step Installation - Important!
ODIN the full stock EB01 package in PDA, the atlas_v2.2.pit in PIT, and "Re-Partition" checked
Let your phone fully boot into the OS and verify everything is working correctly
Remove your battery
ODIN the CWM Recovery package
Close odin, Unplug/replug the phone from USB, re-enter download mode, Re-open odin.
ODIN the modem
Unplug USB Cable, THEN reinsert your battery
Hold both of the volume keys and the power button down until a second after you see the Samsung boot logo, then let go
It should now boot into red CWM recovery
Wipe Cache only. Flash the ec10_rom.zip
Flash the kernel of your choice
Reboot. If you have installed a voodoo kernel, then you should hear a Sexy Robot lady telling you that she is converting your partitions. This process will take 10 minutes or so. If you pull the battery, you will have to start all over again.
Let your phone fully boot into the OS and verify everything is working correctly
I can't stress enough how important it is to check your files for the correct checksum to verify that your download did not get corrupted (you can also use it as a way to make sure you have the right version). Also, follow these instructions exactly. You could potentially be wasting your time and anyone else's who is trying to help you fix whatever random issue you might be having, merely because you didn't follow the instructions.
I've been scanning threads for news of this mystery drop since your first hint and just as I'm about to cash out for the night... OMFG! You f'ing rock mate! Now, if I can only find the strength to hold out for the community brain child... I know it will be worth the wait. Oh, but a tasty new radio sure sounds delicious right now!
Thanks again Adryn for everything you've done to make this phone great!
Sent from my #@&$ing SCH-I500 using my %!#@ing XDA App
justin94 said:
excellent work man, i new you werent going to give up on us, im gonna have to get the tbolt just so i can continue to use your work. ive been with your roms since my omnia
edit-kernal links are down, both of them.
Click to expand...
Click to collapse
For now you can just get them from the superclean thread. Same ones.
Might be a silly question, but is it safe to odin just the modem and nothing else? I want to hold off on flashing the ROM and kernel.
Sent from my SCH-I500 using XDA App
tripacer99 said:
Might be a silly question, but is it safe to odin just the modem and nothing else? I want to hold off on flashing the ROM and kernel.
Click to expand...
Click to collapse
Yes, I believe it was verified to work just fine.
is there a reason why after i odin in the first step then go to odin recovery ... it just sits on "setup connection..."
lucas.scott said:
is there a reason why after i odin in the first step then go to odin recovery ... it just sits on "setup connection..."
Click to expand...
Click to collapse
Are you using Adrynalyne's steps or GizmoDroid's steps? Did you reboot phone and let it fully boot into OS before powering down to pull battery to start new ODIN session?
of course ... and im no stanger to odin or anything .. new problem for me
lucas.scott said:
of course ... and im no stanger to odin or anything .. new problem for me
Click to expand...
Click to collapse
Oh, ok, sorry. I didn't run into that problem when testing it before release so that's a new one on me. Only thing I can think of is trying to download the cwm-fix file again and try flashing it in ODIN again. Maybe you got a bad download. Try this one, different link location:
http://www.mediafire.com/file/06al8prkgj29gps/cwm-recovery-ALL-3-30-FIX.tar
landshark68 said:
For now you can just get them from the superclean thread. Same ones.
Click to expand...
Click to collapse
Which kernel are you using from the superclean thread? eb01 or eb16?
DeezNotes said:
Which kernel are you using from the superclean thread? eb01 or eb16?
Click to expand...
Click to collapse
Neither. EC10
landshark68 said:
Oh, ok, sorry. I didn't run into that problem when testing it before release so that's a new one on me. Only thing I can think of is trying to download the cwm-fix file again and try flashing it in ODIN again. Maybe you got a bad download. Try this one, different link location:
http://www.mediafire.com/file/06al8prkgj29gps/cwm-recovery-ALL-3-30-FIX.tar
Click to expand...
Click to collapse
thanks for the link man . that did the trick . bad DL i guess . thanks .

Categories

Resources