OK, So last week I got Kies to recognize my phone....
this week I get back to the office and it just gets stuck in the "Initializing" mode while flickering back and forth between the home screen....sometimes it just stays on the home screen....
I have already picked Kies as my USB....
tried both enabling and disabling the USB Debugging....
....
So I started to give up on Kies...and just try to get the computer to pick it up as "mass storage"....
and it seems to work, but when I go to explorer and click on the drive (E: & F: on my computer).....it says there is nothing there.....
any help for a stupid idiot?
thanks
anybody got any advice for me?
I've searched the forums and tried everything they say to try to no avail.
Any sense of direction would be appreciated.
Thanks,
d
Related
Hi guys im not quite new when it comes to android.
last night i was trying to upgrade and flash a CWM on my friends vibrant whe it stopped. i turned off the phone when tries to turn it back on.... the phone quite turns hot and not like my phone when im flashing it.
i got all the files download and read all of the instructions before starting ofcourse.
first the phone doesnt turn on, then i manage to enter the DOWNLOAD MODE again but somehow the Laptop doesnt detect and gives a yellow punctuation mark on the device. i tried to install and flash the rom but it doesnt continue. i tried putting or plugging it to a diff port but still no luck.
can someone help me and answer this question? is this thing hard bricked = im screwed
any help would be gladly appreciated. thanks again guys in advance
Try a different USB cable as well as a different USB port.
http://forum.xda-developers.com/showthread.php?p=30831184
Read that post, then, read the thread from page 1, just so I don't feel like I've had the same conversation twice in 1 day.
Shouldn't take long its only a few posts. See if this applies to your situation.
thanks boss but i tried the cable with my galaxy mini and it worked when i tried to flash and went back to stock rom. changed the port as well but still no luck....
the phone as well doesnt turn on like the way of a soft brick. a picture of a phone wanted to be connected to a pc, black screen it is though but the phone goes to DOWNLOAD MODE
Try reinstalling drivers from AIO toolbox. Open Odin as administrator. What does Odin say exactly? Is there a yellow box, if so what does it say in it?
i tried reinstalling the drivers i have downloaded but still no luck, odin detects the phone and when it doesnt i re-install the driver so the computer would detect the COM port of the phone. the odin doesnt push through and no BLUE bar on the phone it self. such as the indicator for the flashing. i tried as well running odin as the administrator but still no luck. so do you think that this could be a hard brick, i dont think so cause i can still enter the DOWNLOAD mode of it. the phone turns hot when im on the download mode. could this be a hardware problem.
No its probably not a brick. I think its a communication issue. I would still think its possible to fix it. As far as it getting hot, not sure but the fact that it gets to download mode is a beacon of hope.
I've got to go to bed, will be back tomorrow to check on this.
yeah i hope thesame way too man. thanks for the reply.... time for you to take some rest. thanks again. i'll post the reply if ever the phone gets fixed
thanks for everything man, the phone now is resurrected after JTAGGING. but i know that those technicians who charged me 1000php just did the flashing on ODIN. i know the thing i've done wrong why it didnt work the first time. now it is running up again. the firmware that was flashed was for TELUS. it now shows T959D. i'll follow the guide fully on flashing and upgrading this thing
I had the same problem as you this morning. I tried driver, after driver, after driver and nothing worked. Eventually I gave in and used my sister's laptop and that did the trick. Mabuti ayos na ang cp mo. Ingat.
i know what most of you are thinking, i have already read through forum after forum for 4, going on 5, hours now. several people have similar situations to mine, but not similar enough to actually help me.
i rooted my s2 earlier today and it went perfectly. then i tried to use odin to flash jellybean to my phone, it was the stock rom. but since that little box wasn't yellow, it failed. my drivers were not properly installed. i forgot to install kies and get my drivers before i did this process. i thought i had already properly installed the drivers i needed, and i am still unsure of what the heck im supposed to have in order to make odin work. well i got this lovely little screen saying "firmware upgrade encountered an issue. please select recovery mode in kies & try again."
so i installed kies. immediately it said that no device was connected. so i unplugged and replugged my phone, said "connecting" but it never connected. not even twenty minutes later. so i rebooted my computer. nothing worked. i tried to boot my phone up to turn off "usb debugging" in case i had turned it on a few days ago without realizing it. the phone wont boot. its stuck on the screen that tells me "firmware upgrade encountered a problem".
however, i can get it to go back into downloading mode, but that doesnt really help me much since odin still cant flash my firmware correctly. it keeps bringing me back to that dreaded screen, im to the point of wanting to rip all my hair out. what else can i do?
someone must know how to deal with this situation. please please please help me! i dont want a $150 paperweight ):
thank you!
jennalking1992 said:
i know what most of you are thinking, i have already read through forum after forum for 4, going on 5, hours now. several people have similar situations to mine, but not similar enough to actually help me.
i rooted my s2 earlier today and it went perfectly. then i tried to use odin to flash jellybean to my phone, it was the stock rom. but since that little box wasn't yellow, it failed. my drivers were not properly installed. i forgot to install kies and get my drivers before i did this process. i thought i had already properly installed the drivers i needed, and i am still unsure of what the heck im supposed to have in order to make odin work. well i got this lovely little screen saying "firmware upgrade encountered an issue. please select recovery mode in kies & try again."
so i installed kies. immediately it said that no device was connected. so i unplugged and replugged my phone, said "connecting" but it never connected. not even twenty minutes later. so i rebooted my computer. nothing worked. i tried to boot my phone up to turn off "usb debugging" in case i had turned it on a few days ago without realizing it. the phone wont boot. its stuck on the screen that tells me "firmware upgrade encountered a problem".
however, i can get it to go back into downloading mode, but that doesnt really help me much since odin still cant flash my firmware correctly. it keeps bringing me back to that dreaded screen, im to the point of wanting to rip all my hair out. what else can i do?
someone must know how to deal with this situation. please please please help me! i dont want a $150 paperweight ):
thank you!
Click to expand...
Click to collapse
Disconnect the cable. Remove the battery and let it out for 10 minutes. Put it back in, go into download mode. Connect with odin and flash again. Hope this will work for you.
Verstuurd van mijn GT-I9100
Christiaan91 said:
Disconnect the cable. Remove the battery and let it out for 10 minutes. Put it back in, go into download mode. Connect with odin and flash again. Hope this will work for you.
Verstuurd van mijn GT-I9100
Click to expand...
Click to collapse
Also, remember to exit Kies using Task manager (and maybe disable Antivirus in ur PC) before connecting to Odin.
Sent from my SGS II
Hi everyone,
I'm sorry if ever I'm posting this on the wrong section cause I'm not sure if this is a problem from android or samsung.
I'm not good at all when it comes to phone troubleshooting so I will try my luck and ask questions about what have happened to my phone just awhile ago. I got this phone from Japan(Samsung Galaxy SII Wimax isw11sc) months ago and I only use it for multimedia purposes as it is region locked and I am at another country atm. everything is running fine until my phone asked for a software update(not really sure what upgrade that was) and I decided to give it a shot and let it download the updates. I left it to do some chores and when I came back to check on it, it reboot looped itself on the AU(mobile phone company from japan) logo.
I did some research and found some things like hard reset and download mode. I tried to do the hard reset(power/home/volume up) method but I can't seem to access the settings instead, the phone keeps on showing me this "Preparing for S/W update. Please wait." after a few seconds, the phone will reset itself back to the reboot loop.
I tried to do the download mode using odin mode but then, I realized that my phone and computer won' connect via USB port because well, my phone won't boot. Also downloaded the manual driver but my pc won't recognize it.(win7 if that helps.)
Please tell me what have happened and what I can do to fix this problem, I don't really care if i lose everything that I have stored on my phone, I just want it to work again. Help will be much appreciated, Thank you.
It's my beloved I9100P. Last night it strangely failed. I realised in the morning when the alarm didn't go off. The phone was switched off.
When I tried to switch on, it got stuck in boot loop. The carrier animation and samsung logo will keep repeating. So I thought I will go into recover mode and do a factory reset. Phone went into factory mode the first time. I thought let me do a restart from there, just to see what happens. At this point, I noticed a lot of red errors on recovery mode screen, most of which saying something like "unable to mount /cache". I restarted it, but unfortunately the phone again went into boot loop.
Now when I tried, it refused to go even to recovery mode. I tried several times, but every time it got stuck on Samsung Galaxy logo.
It went into download mode fine, so I thought I will flash Orange UK carrier ROM. I downloaded the ROM and tried flashing with ODIN. ODIN recognised the device, but the flashing failed with error "Complete (Write) operation failed".
I don't know what to do now, have exhausted all option that I knew.
Any help in reviving my phone please?
@kaushal101 Keep yourphone phone connected to your pc and keep it in download mode. Dont disconnect it it could turn into a hardbrick which you can't fix without jtag repair service.
What you could do is see or you have installled all drivers, kies is disabled, right odin version. Google the problem and you would probably find an answer fast. I hope this message isnt too late..
wulsic said:
@kaushal101 Keep yourphone phone connected to your pc and keep it in download mode. Dont disconnect it it could turn into a hardbrick which you can't fix without jtag repair service.
What you could do is see or you have installled all drivers, kies is disabled, right odin version. Google the problem and you would probably find an answer fast. I hope this message isnt too late..
Click to expand...
Click to collapse
Interesting. After trying several things, I did unplugged it from the machine. It shows the upgrade failed warning message whenever I try to switch it on now, which was expected.
I can still go to download mode and restart the ODIN flashing original Orange firmware process, but it fails with the same error. The only difference is, the first time it failed on CACHE step. Now it is failing one step earlier, at NAND writing stage.
Is there any hope? I had kies disabled etc., but will give it another shot. My phone was accessible with kies and I could also upload my development APKs from Android studio. So I think drivers shouldn't be a problem.
@kaushal101 I dont really have much knowledge about the s2 anymore, so the only good thing I can suggest is to google the problem and get more people to your thread here to help you and or find other threads about the same thing.
It is good that your phone can still go into downloadmode, I think there is still hope to fix your phone
wulsic said:
@kaushal101 I dont really have much knowledge about the s2 anymore, so the only good thing I can suggest is to google the problem and get more people to your thread here to help you and or find other threads about the same thing.
It is good that your phone can still go into downloadmode, I think there is still hope to fix your phone
Click to expand...
Click to collapse
Thanks for keeping the hope alive!
Have followed XDA's S2-ODIN troubleshoot guide, with no luck so far. Tried different versions of ODIN, reinstalled USB drivers, made sure KIES is removed from processes etc. None has helped so far. I'll keep looking!
kaushal101 said:
Thanks for keeping the hope alive!
Have followed XDA's S2-ODIN troubleshoot guide, with no luck so far. Tried different versions of ODIN, reinstalled USB drivers, made sure KIES is removed from processes etc. None has helped so far. I'll keep looking!
Click to expand...
Click to collapse
Did you tryed another stock rom version?
Try other usb cable.
Sounds weird but try to leave the battery out of your phone for like a couple minutes
Try other usb port.
Try other computer:silly:
These are the things I can think of atm.
Have tried other USB port. Have tried a different firmware.
Am going to try a different PC today, will also give different cable a shot. But the cable I'm using is Samsung official one which came with the phone. And I've been uploading APKs using this cable fine, so am quite sure the cable is fine. But still, will give it a shot. Thanks for replying
Hi! I searched all over the web, and no one has had a problem similar to this, so I decided to post it in hopes someone can help.
So yesterday I found my tablet (SM-T210R) and went to recharge it. It worked fine. I noticed that there was a firmware update, so I went to install it. Everything was normal until I hit 93%. The Android guy fell down and over it had a red triangle with an exclamation mark. The device then rebooted and did the same thing over and over and over. Turning it off and on didn't help. I tried to access the menu to factory reset it, but it didn't work, the update would override it or something. The only thing I can access was download mode, but my PC couldn't detect the device even after installing the Samsung drivers and Kies. So basically I'm stuck. My device was unrooted, so I dunno what is wrong. Help appreciated. Thanks!