Just a simple question.
By installing Toshiba english official rom, will the Language of the mobile + windows be changed to English entirely? because the one i'm about to buy is in French.
Please i need help right now.
You can change the language of a TG01 by flashing a new ROM. It will change all the language settings.
For information on how to flash a ROM look HERE. To flash a new language you may need to use the sddl+ method as the radio may differ from the original.
ROM flashing is safe IF done PROPERLY, Always make sure your battery is full, always make sure your battery is secure.
There is always the chance of a bad flash turning your phone into a brick. If you break it, it's down to you.
However i have flashed my TG01 well over 100 times and have never had a problem that the short pin method can't fix.
Happy flashing
http://www.toshibamobile-europe.com/Default.aspx?tabid=583
will this change the language of my TG01? and how would sddl+ method work? or would it guide me throughout?
Please,
search the forum for how to flash a rom! Sticky threads!
shad0wboss said:
http://www.toshibamobile-europe.com/Default.aspx?tabid=583
will this change the language of my TG01? and how would sddl+ method work? or would it guide me throughout?
Click to expand...
Click to collapse
yes, it will; just fine; no, read dedicated thread!
bib*oops said:
yes, it will; just fine; no, read dedicated thread!
Click to expand...
Click to collapse
Thanks alot for your reply. So now i can buy this mobile. And yes i have the link to the instructions. Thanks once again
Related
I've seen many people post his Bootloader are 1.01, 1.02, and 1.03
Someone could explain to me what is the different? And what is the advantage of the higher version?
I found a problem on my Xda II. It couldn't go back to the Original Asia ROM 1.60.00WWE. Althought i have cooked it! I Thought the problem came from the version of Bootloader.
Someone.... Plizz Help me to change my Bootloader version. Thanks!
for 1.01, 1.02, 1.03 I know how to make sdcards to flash the rom,
for the 1.06 version I have not yet found out how the sdcard update mechanism works.
unfortunately I also do not yet know how to downgrade the bootloader.
itsme said:
for 1.01, 1.02, 1.03 I know how to make sdcards to flash the rom,
for the 1.06 version I have not yet found out how the sdcard update mechanism works.
unfortunately I also do not yet know how to downgrade the bootloader.
Click to expand...
Click to collapse
Ok, then how to make SDCard to flash the ROM? Because when we get in to Bootloader, all buttons didn't response.
BTW, mine using 1.02 Version. But it's give me country ID error message when i wanna flash to 1.60.00 COOKED.
You don't know how to downgrade the Bootloader version, how about to upgrade?
1 more question. You tell me you can flash ROM by SD Card method. If i doing that, is nk.nbf and ms.nbf will be upgrade?
Thanks a lot!
Sorry for my BAD ENGLISH
use sdtool.pl http://wiki.xda-developers.com/wiki/RomTools/sdtool.pl
it is a very unpolished tool, not meant for use by people who don't understand what they are doing.
itsme said:
use sdtool.pl http://wiki.xda-developers.com/wiki/RomTools/sdtool.pl
it is a very unpolished tool, not meant for use by people who don't understand what they are doing.
Click to expand...
Click to collapse
Ok. Frankly speaking, i'm not the expert. :lol: So plis give your advice. Maybe short tutorial?
I thought SD Tool software use only for flash the ROM. How about the Bootloader? I really need to change my Bootloader. Plizzz....
Thanks a lot !
itsme said:
use sdtool.pl http://wiki.xda-developers.com/wiki/RomTools/sdtool.pl
it is a very unpolished tool, not meant for use by people who don't understand what they are doing.
Click to expand...
Click to collapse
Ok. Frankly speaking, i'm not the expert. :lol: So plis give your advice. Maybe short tutorial?
I thought SD Tool software use only for flash the ROM. How about the Bootloader? I really need to change my Bootloader. Plizzz....
Thanks a lot !
itsme said:
use sdtool.pl http://wiki.xda-developers.com/wiki/RomTools/sdtool.pl
it is a very unpolished tool, not meant for use by people who don't understand what they are doing.
Click to expand...
Click to collapse
itsme... HELP!! How do i use these FILES?? With what and from where?? I only have USB craddle, mtty software, and SD Card reader.
PLEASE...
Hello... itsme??
http://xda-developers.com/~itsme/download/itsutils.zip
here they are
Hello Rudegar,
And can u guide me to use these files? Can i use USB cable? :wink:
Anyone??
Anyone??
i could use my usb cable
all the instructions i used were from
http://wiki.xda-developers.com/wiki/RomTools
Thanks for the reply Rudegar. Your responses did give some hint, but for beginners (like myself) that have limited experience with these opeartions do find the info helpful but not solving the problem.
My understanding is we first need to follow the steps in http://wiki.xda-developers.com/index.php?pagename=RomTools/sdtool.pl, and put the ROM back to the device by doing a s2d. Am I correct? So will running the script sdtool.pl unlock the bootloader? Or we have to pass in some specific parameters?
Any info will be helpful! I love experts posting their knowledge and help new comers as this is how a strong user community can be built!
-eldon
guys as i wrote in the wm6 upgrade guide.....which all of the ppl seem to not read for some reason...i need help...i have wm5 right now, but i am sorta tired of it so i decided to change to PV_4.0.0.0.6_Touch. now the problem is tht i dun know anything about upgrading...so can any 1 halp me...how to create an external rom? also in the new method where does the upgrade.bat go?? cse over there we only have to take the os.nb and combine it to he .nbf file....also if i decide to change back..(or if anything goes wrong to)the windows mobile 5 original rom where can i get it from?...plzz hepl i am a NEWBIE...so help from u ppl would be greatly appreciated! thank you!
ronn13 said:
guys as i wrote in the wm6 upgrade guide.....which all of the ppl seem to not read for some reason...i need help...i have wm5 right now, but i am sorta tired of it so i decided to change to PV_4.0.0.0.6_Touch. now the problem is tht i dun know anything about upgrading...so can any 1 halp me...how to create an external rom? also in the new method where does the upgrade.bat go?? cse over there we only have to take the os.nb and combine it to he .nbf file....also if i decide to change back..(or if anything goes wrong to)the windows mobile 5 original rom where can i get it from?...plzz hepl i am a NEWBIE...so help from u ppl would be greatly appreciated! thank you!
Click to expand...
Click to collapse
NO PAIN NO GAIN !!!
READ POST 1 !!!
(please follow my link in the signature hereinafter)
with all due respect...ur method is a bit more confusing......im totally confused...this is too difficult..:S
ronn13 said:
with all due respect...ur method is a bit more confusing......im totally confused...this is too difficult..:S
Click to expand...
Click to collapse
follow the steps from 1 to 13.... difficult?
that will take less than 20 minutes to flash......
Or you want to spend days in mistakes??????????
Well.... thats it ! You have the right to make choices, I will say no more.
dude, i didnt mean to piss u off....its just tht this is my first time doing this sorta thing so i am a bit apprehensive....ill try to do so...sorry if i pissed u off!
dioxda2....lissen ......the PV_4.0.0.0.6_Touch has the os.nb...so should i use the traditional method u used?....
Yes...Old method it is
ronn13 said:
dioxda2....lissen ......the PV_4.0.0.0.6_Touch has the os.nb...so should i use the traditional method u used?....
Click to expand...
Click to collapse
Dear dioxda2..I hope you forgive me for answering instead of you...Dear Ronn13...I'm currently using this Rom...I should say that:yes, you definitely have to use the old method...This ROM is great and almost without bug (almost ).Hope you do it successfully.
thnx amiromario...secondly...i have wm5 installed....do i need toi do the pv temp step..or can i directly upgrade the rom?
To be safe, perform Step1 anyway. It is the only way to get a predictable state on your Prophet before flashing. As there are almost no "pure" official ROM's, every vendor branded it to their ow liking, it is hard to tell if your WM5 isn't going to obstruct an update (afterall, we are hacking this stuff).
Hi,
I want to do something like that: I want to use last OEM WWE Niki Rom, and cook(rebuild) with more apps and better video drivers. No need to change anything else. So, I need an advice. I've searched in this forum and I found this cooking guide that seems to be very good:
http://forum.xda-developers.com/showthread.php?t=372469
The problem is, it's for kaiser. So, my first question is (the first of many) can I use the same method with (and for) our Touch Dual's? Or there's another software that I've not found?
yes they are simillar
marek77 said:
yes they are simillar
Click to expand...
Click to collapse
But there's any software or guide here in Nike upgrading? Honesly, I didnt found it...
what exactly do you need?
marek77 said:
what exactly do you need?
Click to expand...
Click to collapse
I just need the kitchen so I can cook (im my case I just want rebuild).
Htc Iolite WWE has english language
By flashing RUS rom using gold card all goes right, by finishing and rebooting it says that rom not desighned for this region.
I've tried to disassemble russian rom in QMAT and assemble it with OS only without radio and spl, and it hangs on "loading" in bootloader... I understand, that firmware must be original shipped, or sighned by Htc, otherwise, it wont flash via gold card. Maybe another way to do it? I've found firmware that contains OS only, named "IOLITE_WWE2RUS_HTC__032_signed.nbh" it flashes via gold card and flashing and works, but i seriously doubt, that Htc done this version. You wrote that Rom must be patched to remove region lock. How to do it? Sorry for bad English...
No way. Only HTC private key.
Redional lock
spaceball said:
Htc Iolite WWE has english language
By flashing RUS rom using gold card all goes right, by finishing and rebooting it says that rom not desighned for this region.
I've tried to disassemble russian rom in QMAT and assemble it with OS only without radio and spl, and it hangs on "loading" in bootloader... I understand, that firmware must be original shipped, or sighned by Htc, otherwise, it wont flash via gold card. Maybe another way to do it? I've found firmware that contains OS only, named "IOLITE_WWE2RUS_HTC__032_signed.nbh" it flashes via gold card and flashing and works, but i seriously doubt, that Htc done this version. You wrote that Rom must be patched to remove region lock. How to do it? Sorry for bad English...
Click to expand...
Click to collapse
To my knowledge,QMTA will temporarly make your device super CID to let you flash another ROM, but you still have to modifiy the shipped ROM by using NBHutil to take the shipped ROM apart and rebuild it.
Once you have an RUU_singed.nbh built by NBHutil, then, and only then you can flash without problems usinng the Iolite special RUU found in the Iolite forum.
correct, so only HSPL will help. I also have my own program to make the regionid patch.
And how goes the hardspl progress?
All here waiting for a hardspl for lolite.
EDIT:
Nevermind. I just saw your other post.
Thanks for your efforts.
dancer_69 said:
And how goes the hardspl progress?
All here waiting for a hardspl for lolite.
EDIT:
Nevermind. I just saw your other post.
Thanks for your efforts.
Click to expand...
Click to collapse
Animelover from HTC-DEVs works hard, maybe this week! (today, tomorrow...)
Greetings!
Great! Waiting for this day.
Great!!!
Not cool
Greetings. First of all, I'd just like to say I have the utmost respect for cookers, since they develop their applications and programs on their own time. I can relate to that. Everyone is good at something and takes pleasure in doing it. And I also appreciate forums such as XDA-Developers, that are based on one helping the next out.
But... It's just not cool to leave us drooling over something for 2 times in a row:
1 - like saying "will get around to releasing HSPL soon" and then not hearing word from for 2 months;
2 - Saying that it is done and you're just going out to lunch and then you're gonna upload it, then a week passing and no word from, yet again.
I can understand that unexpected things can happen and you might not be able to do the Hard-SPL, but at least let us know that it won't happen, so we can go ahead and sell our Iolites and buy some other HTC that has Hard-SPL available. Just let us know once and for all if we should abandon all hope.
Best regards,
Bruno Santana.
billabongstaff said:
Greetings. First of all, I'd just like to say I have the utmost respect for cookers, since they develop their applications and programs on their own time. I can relate to that. Everyone is good at something and takes pleasure in doing it. And I also appreciate forums such as XDA-Developers, that are based on one helping the next out.
But... It's just not cool to leave us drooling over something for 2 times in a row:
1 - like saying "will get around to releasing HSPL soon" and then not hearing word from for 2 months;
2 - Saying that it is done and you're just going out to lunch and then you're gonna upload it, then a week passing and no word from, yet again.
I can understand that unexpected things can happen and you might not be able to do the Hard-SPL, but at least let us know that it won't happen, so we can go ahead and sell our Iolites and buy some other HTC that has Hard-SPL available. Just let us know once and for all if we should abandon all hope.
Best regards,
Bruno Santana.
Click to expand...
Click to collapse
you know, I've just realised that this retard has posted the same **** in 3 different threads.
Olipro said:
you know, I've just realised that this retard has posted the same **** in 3 different threads.
Click to expand...
Click to collapse
What happens, not longer. He will sell his Iolite.
Yet again
Originally Posted by Olipro
you know, I've just realised that this retard has posted the same **** in 3 different threads.
Click to expand...
Click to collapse
This so called retard, as you so eloquentely put it simply expressed his opinion in the correct threads, as I've just explained in another thread were you TRIED to write something smart, but utterly failed.
Ever tried growing up?
Best regards,
billabongstaff said:
This so called retard, as you so eloquentely put it simply expressed his opinion in the correct threads, as I've just explained in another thread were you TRIED to write something smart, but utterly failed.
Ever tried growing up?
Best regards,
Click to expand...
Click to collapse
it's still usually against forum rules to post the same thing several times.
guys im really sorry if this has been asked amillion times before but i have read a lot of posts here and i still dont fully understand what i need to do....
i got a G4 o2 XDA mini S, i have established that now could somebody please put in plain english (i mean n00b langauge so i can understand) exactly what i need to do.
or provide me with an up to date link on a working tut and possibly a link for i think windows mobile 6 crossbow edition.......jeez i probably sound like a complete tool.
really hope someone can help me as id love to give WM6 a whirl
thanks
yes... indeed
Stabata said:
guys im really sorry if this has been asked amillion times before but i have read a lot of posts here and i still dont fully understand what i need to do....
i got a G4 o2 XDA mini S, i have established that now could somebody please put in plain english (i mean n00b langauge so i can understand) exactly what i need to do.
or provide me with an up to date link on a working tut and possibly a link for i think windows mobile 6 crossbow edition.......jeez i probably sound like a complete tool.
really hope someone can help me as id love to give WM6 a whirl
thanks
Click to expand...
Click to collapse
hi there, sure we can help you, 1st use the search button, and you will be able to find what you look!
good luck then!
ok I have reflashed my wizard 4 times tonight. I have tried the newest TNT rom, Hornet 5 and Touch HD. On flashing TNT and Hornet, it says that the updater is not new enough and leaves my wizard in the 3color bar state. I also have been unable to connect to my home wifi network through my wizard, through either the love rom, or the touch hd. anyone have suggestions?
tigrisimo said:
hi there, sure we can help you, 1st use the search button, and you will be able to find what you look!
good luck then!
Click to expand...
Click to collapse
ok i appreciate the time you took to post but i did say that i have read a lot of threads and posts and not many of them make sense to me, i am a n00b at flashing these devices and i don't mind admitting it, all i asked for was some help not a derogatory remark.
Stabata said:
ok i appreciate the time you took to post but i did say that i have read a lot of threads and posts and not many of them make sense to me, i am a n00b at flashing these devices and i don't mind admitting it, all i asked for was some help not a derogatory remark.
Click to expand...
Click to collapse
but you have to read HOW TO UNLOCK, HOW TO FLASH and thats it, once you read you wll be able to unlock/flash
be sure to know if you have a G3 or G4 device, always have a fully charged battery to unlock, flash etc.
Better to use a xp based PC, use the lastest activesync, have a USB cable in good conditions, never ever touch the screen/cable in the unlock/flash, do not run another programs while unlock/flash.
Ok those are just some advices, all you migth need is in the forum..
GOOD LUCK!