Related
I dodged a big bullet when attempting to install Eugene's MacNut, to the point that I sortof bricked and had to first install his "FroYo that doesn't brick". It's actually very good except for the GPS issue. As he said in the install instructions, when it goes into recovery there is an error message and essentially stock recovery does not work. So, I put the MacNut zip onto my internal SD card and installed Clockwork Recovery but I am not able to figure out from the instructions how to actually flash it, as booting into recovery from Clockwork takes me back to the stock recovery which (again) does not actually allow flashing. Do I need to Odin back to stock, install Clockwork and then install from there? That's sortof what messed me up in the first place (trying to Odin back to stock from Eugene's Hybrid). Or, will it work with ADB if I rename it update.zip and put it in the tools folder? TIA.
wbexpress said:
I dodged a big bullet when attempting to install Eugene's MacNut, to the point that I sortof bricked and had to first install his "FroYo that doesn't brick". It's actually very good except for the GPS issue. As he said in the install instructions, when it goes into recovery there is an error message and essentially stock recovery does not work. So, I put the MacNut zip onto my internal SD card and installed Clockwork Recovery but I am not able to figure out from the instructions how to actually flash it, as booting into recovery from Clockwork takes me back to the stock recovery which (again) does not actually allow flashing. Do I need to Odin back to stock, install Clockwork and then install from there? That's sortof what messed me up in the first place (trying to Odin back to stock from Eugene's Hybrid). Or, will it work with ADB if I rename it update.zip and put it in the tools folder? TIA.
Click to expand...
Click to collapse
ODIN back to stock - that's the most surefire way, I think. CWM may or may not be on the phone still once you get back to stock - supposedly repartitioning with ODIN won't mess with your internal SD card, but mine was wiped when I did this. (Since then, I've successfully repartitioned with ODIN several times to get out of bad flashes, etc, and CWM was still on the phone so I could flash a new ROM straight away.) I ended up installing the one-click root, then installing CWM, then flashing a new ROM.
I have successfully been able to root and install everything on my Mytouch4G just fine, however, when I tried to install my wife's Vibrant, I am stuck. Here is what I have done:
1) I rooted successfully using superoneclickv1.9.1
2) I installed ROM Manager and also downloaded the Auxora ROM to get ready to install
3) When I flash CWM recovery, it says current and latest recover is 2.5.1.2 (concern here that my mytouch says 3.0.2.4 - do different phones install differently with CWM?). When I look at all CWM recoveries I also notice there is two seemingly more current versions available 2.5.1.3 and 2.5.1.4. I have left it at .2 but wondering why all the versions.
4) When I reboot into recovery, I always get the stock recovery and have not been able to get CWM recovery so I am unable to flash my Auxora ROM. I ran update packages numerous times, and get a signature verification error. I have tried a recovery 3e patch that does not work either. I also gave a try at downloading and SDK, but received temp root errors (phone is already rooted).
After reading many posts, I cannot seem to get a direct answer on what I should do to get CWM to actually boot properly, so I can flash a ROM. Someone said to flash the stock JDK rom, but if I can't boot into recovery, how can I flash anything.
Any help would be greatly appreciated.
You need to get a program for your pc called odin to get back to stock. you can find that and instructions on how to use it if you search for the daily updated vibrant bible its GREAT
http://forum.xda-developers.com/showthread.php?t=849028
going to stock eclair heres a a great guide
So going back to stock eclair will then allow me to install CWM recovery then load roms?
Every once n a while I haft do the install packages thing twice before it gives me clockwork green
. Hope this helps.. o n btw u should look at some of the other roms in the bible before u try auxora
yes u should go back to stock eclair for every rom, in my opinion. Then after that do the 3 button combo and install packages and u will have to do it twice and then the green screen will kick in and ready to rock a new rom.
i hope this helps
What is your current firmware?
I see you posted over in the "NOOB GUIDE" thread, you should really try to root using the method posted there and not any one click root apps.
This should be the root method everyone uses:http://forum.xda-developers.com/showthread.php?t=723479
After root your phone recovery should be blue. Choose "reinstall packages" gives you green recovery(this may need to be repeated multiple times to work possibly including flashing CwMRecovery with ROM manager. I recently did it 5 times b4 i got green recovery)Once you access green recovery chose "apply sdcard:update.zip" go into advanced and choose "reboot recovery" This should give you red recovery. Do a nandroid backup and flash away. Good luck!
Another option you could do is to download SGS kernel flasher from the market and flash a voodoo injected kernel with that app. Then when you boot into recovery you will have red voodoo recovery and you can flash away.
Odin to stock the best way to flash a new rom
Sent from my SGH-T959 using XDA Premium App
jman531 said:
So going back to stock eclair will then allow me to install CWM recovery then load roms?
Click to expand...
Click to collapse
The stock 2.2 that Samsung distributed with their Kies tool has a recovery that checks signatures. Everything earlier does not check signatures. So either use something earlier to get CWM running, or use a ROM that doesn't have the stock 2.2 recovery in the first place, or mod your recovery using the method described in http://forum.xda-developers.com/showthread.php?t=833423
Using Odin to go back to stock Eclair between your flashes of modded roms has the benefit of taking care of this, and also can clear up left over bits and pieces that may interfere with the proper function of your new ROM.
ok, i followed the instructions and am back to eclair, however, whenever I install packages, it just reboots the phone, not even back into stock recovery. I use the 3 key method and get into recovery, run install packages, and the phone just boots back up...its like it isn't running the update.zip file...
UPD: When i load rom manager and try to reboot into recovery, it says the application superuser permissions has stopped unexpectedly and keeps force closing now....titanium backup wont run now either, my root permissions seem whacked after going back to eclair?
UPD2: I followed instructions to unroot and reroot here: http://forum.xda-developers.com/showthread.php?t=739300
It removed superuser, then added it back again, but I still get the unexpected error and it appears my root is not in place. I am back to eclair, and now need a certain way to get my root fixed, so I can try and flash CWM recovery. Without root working, it is not letting me. My wife hates me now for doing this to her phone, so those of you that are married, I would appreciate your assistance to get back on her good side...before Mother's day...please? =)
Ok, thanks for all the help, however, I am really back where I started. I can only get stock recovery, and for the life of me, cannot get CW recovery to load. I used ODIN to go back to eclair on the vibrant, have a good root on the phone now, and no matter how many times i reinstall packages i cannot get clockworkmod recovery to load, ever. Any more thoughts out there?
I had this trouble a few months back. Things to check before going into recovery:
You gotta have root access.
Make sure you have debugging on
Install busybox FIRST
Try uninstalling Rom manager and reinstalling the latest version.
apply the recovery for vibrant and let it boot into recovery.
When it boots into recovery Don't try to install packages yet. Just reboot.
Look here for the files:
http://forum.xda-developers.com/showthread.php?t=833423&highlight=3e+recovery
When it boots up push the update.zip to the sd card on the phone, not the external card.
Run the script and it should reboot back into recovery.
You should now be able to install packages.
This way has always worked for me.
starkiller86 said:
I had this trouble a few months back. Things to check before going into recovery:
You gotta have root access.
Make sure you have debugging on
Install busybox FIRST
Try uninstalling Rom manager and reinstalling the latest version.
apply the recovery for vibrant and let it boot into recovery.
When it boots into recovery Don't try to install packages yet. Just reboot.
Look here for the files:
http://forum.xda-developers.com/showthread.php?t=833423&highlight=3e+recovery
When it boots up push the update.zip to the sd card on the phone, not the external card.
Run the script and it should reboot back into recovery.
You should now be able to install packages.
This way has always worked for me.
Click to expand...
Click to collapse
thanks...It is rooted, but not sure about busybox...the stock recovery is 2e now since I went back to eclair, so not sure i should follow that link as it talks about modifying 3e and making it backwards compatable. I did use that process before I went back to eclair, and it didn't work for me. I have uninstalled rom manager, and reinstalled...and it is different in that it shows a flashed recovery 2.5.1.2, and never asks me for my phone type anymore...it used to ask me and i had to select vibrant....is the recovery supposed to be 2.5.1.2? when I show all recoveries it lists .1, .2, .3, .4 so wondering if I should use .3 or .4...why does it stay at .2?
starkiller86 said:
I had this trouble a few months back. Things to check before going into recovery:
You gotta have root access.
Make sure you have debugging on
Install busybox FIRST
Try uninstalling Rom manager and reinstalling the latest version.
apply the recovery for vibrant and let it boot into recovery.
When it boots into recovery Don't try to install packages yet. Just reboot.
Look here for the files:
http://forum.xda-developers.com/showthread.php?t=833423&highlight=3e+recovery
When it boots up push the update.zip to the sd card on the phone, not the external card.
Run the script and it should reboot back into recovery.
You should now be able to install packages.
This way has always worked for me.
Click to expand...
Click to collapse
OK>>> I GOT IT... Thanks to everyone who helped...Here is what was needed:
1) Install ODIN, install back to eclair
2) uninstall ROM Manager, reinstall
3) I needed to select the 2.5.1.2 recovery from the list again (this was important as it somehow knew of the previous load, but files were missing, or something was just wrong.) It finally loaded properly, and asked for phone type again, so selected vibrant
4) I rebooted into recovery, and instead of install packages, i rebooted once, as starkiller suggested
5) After reboot, went back into recovery from rom manager, and this time installed updates, and it showed that it replaced the recovery with CWM.
6) It rebooted into stock recovery however, so I once again selected install updates, and it went right into CWM recovery, and now I am flashing happy!!!
Thanks again everyone...this was soooooo different than my mytouch4g!
If you have the Kies update of Froyo, the 3e mod will sometimes not work. I've gotten to CWM though , but its best to downgrade then flash a ROM from there.
I just wanted to bump this thread because it really helped me.
I've messed around with numerous android phones, and I've never had thie issues I've had with this phone getting into recovery to flash ROMs
Thank you!
This is my first time posting.
I am a noob, but I am trying to get beyond that. I have flashed kernels and ROMS to my GT-I9100, with success. The other day, I was going to flash a new ROM, and I tried to make a Clockworkmod backup of my current ROM...while the phone was charging. Is this a major blunder?
The reason that I ask is that CWM crashed in the middle of the backup, and now I can't enter CWM recovery and the phone doesn't boot properly. I just get stuck in a bootloop. I can get into download mode. I used Pistachio's post about how to fix a soft-bricked GS2 to flash back to stock thru Odin. Then I used CF-ROOT to re-root the phone. After that, everything works fine, and I can get to Android recovery mode. Then when I try to flash a ROM, Titanium Backup must be restoring the previous version of ROM Manager, and I get stuck in the same bootloop when trying to get into CWM recovery.
Is Clockworkmod corrupted? Did the recovery partition get corrupted? Should I flash back to stock, delete ROM Manager, then re-install it? Should I bite the bullet and delete my Titanium Backup folder, then re-install everything from scratch? Should I flash back to stock with Pistachio's .PIT file and tick RE-PARTITION?
I looked for an answer specific to this problem, and cannot find the exact same scenario in any other threads. There are similar problems, but I think that I have a CWM app or recovery partition problem, or I may have a NAND rw corruption. I don't think that it is a NAND rw corruption though, because I can flash different kernels and ROMs.
I have been using Resurrection Remix versions 2.2, 2.4.1, and 2.5.3.
I have been using Siyah 3.3.2 kernel.
Please help, and excuse my noobness if I am beating a dead horse with this question.
Sounds like Rom Manager borked CWM/CWRecovery, which it seems to do on SGS2 quite a lot.
Most of the scenario you outlined in para.3 of your post (back to stock, delete ROM Manager) sounds like a good WTG, but do not reinstall it.
If you're going to use a kernel which has CWM/CWRecovery (like Siyah), do not use Rom Manager at all. Uninstall it & keep it that way. CWM/Recovery can do pretty much everything Rom Manager can, and you're playing with fire having both on the phone. Eventually Rom Manager will bork CWM again if you use it.
In the first instance, go back to stock, re-root your phone & reinstall the rom/kernel you're wanting to use. If Rom Manager is installed by default, uninstall it before you do anything else. With a bit of luck, you shouldn't have to do anything else (like messing around with PIT's which you also mentioned in para.3). If you batch restore your apps with TI, make sure you don't restore Rom Manager.
Thanks for the speedy reply.
I will try what you have suggested, but how do I flash the .zip file from my phone without ROM Manager? Do I have to do it through Odin?
Yep, that's right. Get an Odin flashable rom from Intratech's thread (search for it on here). If links in that thread don't work, search here or Samfirmware.
Edit - And once you've got your phone back up & running the way you want, use CWRecovery to do all your flashing.
My apologies, I should have been more specific. I want to flash the RR 2.5.3.zip. Should I still download it to the PC, then flash through Odin, or can I use Android recovery to do it through the phone?
OK. Let's rewind a bit.
What state is your phone in right now ?
I am flashed back to stock, and about to use CF-ROOT.
OK. Root the phone, CWM/Recovery will be installed by default. Once the phone is rooted, reboot into CWRecovery, flash your RR zip & you should be GTG. Just remove Rom Manager if it's installed as part of that process before you do anything else (including backing up). If you're going to restore a backup, again, uninstall Rom Manager immediately after you restore.
OK, after I flash CF-ROOT, I will re-install Titanium Backup, and delete ROM Manager to be safe before proceeding. Then I will flash the ROM.zip and test CW recovery and reboot again. I will reply after doing so.
Thanks
ARRRGH!
After flashing CF-ROOT I cannot get to the splash screen upon reboot. I made sure that I ticked USB debugging before flashing the kernel. I can still get into download mode and CWRecovery, so I flashed back to stock, and tried again to no avail. I tried flashing the RR 2.5.3.zip, in CWRecovery, and it flashed. I get to the splash screen but no further. I feel like a terrible noob now, because yesterday I had the phone flashed to stock and rooted no problem. Is there something that I am missing? I made sure that I used the proper CF-ROOT kernel.
So you're getting bootloop when you flash RR ? Have you tried booting into recovery & doing a wipe/factory reset ?
I believe that I am fixed.
I restored a Nandroid backup of my stock ICS from right after my original rooting, and the phone booted fine. I did a wipe/factory reset and wiped cache. Then I flashed RR 2.5.3. The phone rebooted fine again. I IMMEDIATELY uninstalled ROM Manager and made sure it was out of Titanium Backup as well. I have rebooted several times, normal, download, and CWRecovery, and everything works as it should. I think that I am getting over my noobness.
I WILL NEVER INSTALL ROM MANAGER AGAIN...DOWN WITH ROM MANAGER!!!!!!!!!!!!!! Except for the Little Alex icon, that's still pretty cool.
A thousand thanks for your help. At least I was on the right track when I first asked for help. I was pretty sure it was a problem with ROM Manager, because when it crashed, it started this whole mess. I'll be sure to press the THANKS button for your help, and I'm going to thank Pistachio for his thread as well.
Not n00bness, stuff happens sometimes ;-) You weren't the first person to get tripped up by Rom Manager (I did not long after I got my phone), and you won't be the last.
Yep you had a fair idea of what might have caused it, and your detailed OP certainly made it a lot easier to work out WTF was causing the problems.
No probs. Glad you got it sorted ;-)
I installed TWRP on my phone, and went into Bootloader an hit RECOVERY so I can get to the program (the first time I did this it brought me to the TMRWP program). THIS time, it completely wiped my friggin' phone... after I sat there like 4 hours re-setting up everything PERFECTLY how I wanted it.
What's weird is it kept ALL my apps that I converted to SYSTEM APPS, but all my user stuff is gone.
Lesson learned... Don't click recovery from Bootloader.
That has yet to happen to me with any recovery and 3 devices currently with twrp. Might be a step missed with the install or maybe you left a bootloader update zip and ran it when you rebooted? Or it can be a bug as going to recovery from bootloader via a cold start is how to get there traditionally. I would email teamwin and try to sort it out or redo the recovery install, making sure to check the md5 of the file after you download it.
Sent from my Transformer TF101 using Tapatalk 2
Your supposed to click recovery at bootloader. Thats where you do backup, restore and flash new roms.
HTC Sensation z710e
ICS 4.0.3
Sense version 4.0
Software Sense-o-maniac v1.3
Kernel. 3.0.30 Bricked
Radio 11.68.3504
That's what I thought too. If I'm not mistaking, I flashed the new firmware after I did the TWRP, so maybe that screwed it up somehow. I take it TWRP must be the LAST image you flash? Only flashes I remember doing were:
Customize bootloader screen
TWRP.
firmware update
Do I need to re-flash the new firmware before re-flashing TWRP, or is the firmware going to remain no matter what I do from this point on?
Just adb flash recovery. Put the recovery image in your platform tools folder. Adb reboot bootloader. when you are rebooted adb flash recovery recovery.img.
Or use one of the many tools made to do that on our forums
Sent from my ADR6425LVW using xda premium
Well I went ahead and used the GOO Manager to flash TWRP again, and this time it worked fine. I'm going to re-setup my phone again then before I customize it back like I had it, going to try to get to recovery and see if it works.
With it now being installed, does that mean I can't flash anything directly from SD Card or modify the bootloader anymore without it causing problems?
What I mean, moreso, is... if I ever put factory reset. will it reload the factory rom + keep the newest firmware I installed (etc.) or do I nee to back up the phone with TWRP and recover from that when I want to load it back?
Factory reset just puts things back to the way they were without the stuff in the data partition or any user apps or settings. This means that say you flash a custom rom, it will reset to as if that custom rom was freshly installed since the custom rom has replaced the factory rom in the /system/ parition and anything else related to it.
With that said it is usually a good practice after rooting a fresh device to do the nandroid and then transfer it to a computer before you do anything else. Note that while you probably won't be switching recoveries a lot, that nandroid backups generally work only with the recovery that generated them so don't get them mixed up.
Hoping someone can tell me how to save my data. I was running custom recovery TWRP and switched to CWM after the phone would randomly hang on reboots. After flashing back now in TWRP I couldn't get anything to work. Everything would fail. Long story short I have now did the ODIN back with the odin file that doesn't wipe data. Problem is the phone just hangs at Samsung splash screen. I can get to stock recovery and I can get into ODIN, I feel like if I wipe my device it will be back up and running. There anyway to get my daughters pics off the phone before wiping. thanks in advance and I feel like I already know that there is no way but was holding out hope....
If there is some way for you to get a custom recovery back, which I believe there is if you have the old ME5 through ODIN, you should be able to mount USB storage from Recovery and transfer them to a computer