Related
http://forum.xda-developers.com/showthread.php?t=991276&highlight=http://forum.xda-developers.com/+V6+SuperCharger!
http://forum.xda-developers.com/showthread.php?t=991276&highlight=[Script]+V6+SuperCharger!+HTK+%26amp%3B+BulletProof+Launchers!
I know quite a few roms that use this script.. That run awesome!!
I was hoping that more roms here would make use of it.
OmegaRED^ said:
http://forum.xda-developers.com/showthread.php?t=991276&highlight=http://forum.xda-developers.com/+V6+SuperCharger!
http://forum.xda-developers.com/showthread.php?t=991276&highlight=[Script]+V6+SuperCharger!+HTK+%26amp%3B+BulletProof+Launchers!
I know quite a few roms that use this script.. That run awesome!!
I was hoping that more roms here would make use of it.
Click to expand...
Click to collapse
I do use this script, and I can say that it is a success!
1.0.2 Using the MiniCM6 Nobodyatall!
One of the best roms in Big X10 xda land "Wolfbreaks" uses this.
I hope the roms here start using it... It rapes!
I must say.. this is works very well on my mini with MiniCM 2.0.5 GingerBread
Before: Active launcher and Zeam launcher is redraw everytime I finish to play NFS Shift or even after I open Application manager
After: No redraw (Active Launcher and Zeam) when finished playing Angry Birds, NFS Shift and other RAM eater games
Great ..
So I tried this script, and now my launcher is hard to kill / supercharged
but then after reboot it still says my launcher is hard to kill, but also that my prior minfrees don't match my current minfrees.
it then shows my curent minfrees as the default minfrees and the prior as what i selected. is that supposed to happen?
I mean exactly as the screenshot moedjs posted
like isn't it supposed to set current minfrees to what i selected, and not to default?
moedjs said:
I must say.. this is works very well on my mini with MiniCM 2.0.5 GingerBread
Before: Active launcher and Zeam launcher is redraw everytime I finish to play NFS Shift or even after I open Application manager
After: No redraw (Active Launcher and Zeam) when finished playing Angry Birds, NFS Shift and other RAM eater games
Great ..
Click to expand...
Click to collapse
Exactly.. makes multi tasking rock.. keeps the memory free, locks in the home app.
It works badass!
I did not understand the installation
ops , I did find a help, sorry
hey guys, does this works in SE android firmware 2.1?
Another question, in a tutorial it says :
P.S. When Installing Programs, MAKE SURE Script Manager are installed on PHONE and NOT in the MicroSD Card!
I have app2sd installed already , how can I do this? thanks
can someone who tried this give his values and his results?
sounds like a great tool
thnx in advance
I have the same problem as Carpe-Dimi above regarding new minfrees not sticking after reboot, although the Launcher is "Hard to kill".
I used option 6 in the script set up.
I followed help file advice to have Script Manager run /system/etc/init.d/99SuperCharger "at boot" and "as root" but problem persists.
Otherwise seems to work fine at keeping launcher in memory. I don't see any boost in Quadrant Score... or any other noticeable improvements to be honest.
MiniCM 7 is pretty good as it is
Any advice on settings or getting minfrees to stick?
Anyone know if it works on mini pro?
That number 1-17 is best for my phone?
alanllew said:
I have the same problem as Carpe-Dimi above regarding new minfrees not sticking after reboot, although the Launcher is "Hard to kill".
I used option 6 in the script set up.
I followed help file advice to have Script Manager run /system/etc/init.d/99SuperCharger "at boot" and "as root" but problem persists.
Otherwise seems to work fine at keeping launcher in memory. I don't see any boost in Quadrant Score... or any other noticeable improvements to be honest.
MiniCM 7 is pretty good as it is
Any advice on settings or getting minfrees to stick?
Click to expand...
Click to collapse
there are config files in the ramdisk.tar (can't remember name atm, but they are init.rc files) that have lines regarding the setting of ram optimizations.
however. these are definatley meant to do the same as the script, but the values in them don't correspond to the ones the script readsout, so I'm thinking another script runs on top of that which overrides those values again.
that's just a theory tho, since I can't edit the ramdisk file as I dunno how to set the permissions back when unpacking and repacking ramdisk.tar but I'll get back when I find out.
as for the launcher being bulletproof, that definately makes the home button respond a lot faster ^^
Carpe-Dimi said:
there are config files in the ramdisk.tar (can't remember name atm, but they are init.rc files) that have lines regarding the setting of ram optimizations.
however. these are definatley meant to do the same as the script, but the values in them don't correspond to the ones the script readsout, so I'm thinking another script runs on top of that which overrides those values again.
that's just a theory tho, since I can't edit the ramdisk file as I dunno how to set the permissions back when unpacking and repacking ramdisk.tar but I'll get back when I find out.
as for the launcher being bulletproof, that definately makes the home button respond a lot faster ^^
Click to expand...
Click to collapse
Somewhere in the original post it says that in some Custom Roms the minfrees won't stay after reboot so you HAVE TO select 'run at boot' for it to stay.
edit: From original post:
Note: For some reason, the minfree levels do not stick on some Custom ROMs. I don't know why this is. Maybe a bug in GingerBread?
........ You can check /res/user.log to see if it ran...
........ If this happens to you, use Script Manager to load /system/etc/init.d/99SuperCharger "on boot" and "run as root"
And I also have a question(just like the one 2 above)
What is the best one to choose (1-17)?
ThankYou
I tried:
'........ If this happens to you, use Script Manager to load /system/etc/init.d/99SuperCharger "on boot" and "run as root"'
and still could not get values to stick
Has anyone else tried this and had more luck?
how do you install this.. i could not understand
Carpe-Dimi said:
there are config files in the ramdisk.tar (can't remember name atm, but they are init.rc files) that have lines regarding the setting of ram optimizations.
however. these are definatley meant to do the same as the script, but the values in them don't correspond to the ones the script readsout, so I'm thinking another script runs on top of that which overrides those values again.
Click to expand...
Click to collapse
u r correct...the memory free settings are modified by some file not located in ram disk...i have examined the init.rc files and ramdisk settings are quiet different form the one that is set in the roms during runtime
now only if v knew what that file was!!!
The values are not equal with me, but I noticed a big improvement!
I am using the following values in the original 6,8,16,20,22,60 MiniCM6 Froyo!
It must have some kind of file it impossible values are equal, but it works it works!
I have done for mine and is awesome...
DareDan said:
I have done for mine and is awesome...
Click to expand...
Click to collapse
which values did you use?
please delete this post sorry
Hi,
I think in making this thread to discuss what is the optimal configuration for our beloved x10 minis/pros/x8
Best configuration, in my opinion, is when you can use the phone with maximum free memory(so, no lag), the maximun batery duration(so, no overclock and yes undervolt).
These options are completly harm free, if you dont like them you may just undo and be happy, no system files are harmed.
THESE WORKS ALSO WITH X8 and X10 mini pro. These three is the very same phone specs with diferente body shape.
The
Here is goes my configurations:
Cyanogenmod menu/ Performance.
CPU Configuration:
Governor Interactive X(it scales a lot the processor power, keepin it as mutch as possible in low frequencies without performance loss)
Undervolt Ticked
set on boot Ticked
Jit Ticked
allow purging of assets Ticked
Spare Parts program
Windows Animations FAST
Transition Animations FAST
Font Size EXTREMILY LARGE(im a bit blind, )
Programs That eat resources continuously
The is some of them bundled in rom.
I delete all, prefering programs that dont restart itself and eat the few phone resources.
Deleted:
DSP Manager
Gmail
Google Maps
Latitude
FOTA KILL (gOOGLE OVER THE AIR UPDATES)
Pico TTS (text to speech program/interface - if ypu arent blind u dont need it)
Voice Dial
Voice Search
Update:
Supercharger v8 Memory optimize script.
1 Download SCRIPT MANAGER FROM MARKET
2 Go to this thread and download SuPERCHARGER SCRIPT
3 Open program, load the script, Tick option run as ROOT.
4 in program dialog, type "1(fast)" and "enter"
5 In main Dialog, type "2" agressive one" and "enter"
6 Hit back button, click in run in background.
7DONE
Now i get a very Stable phone, fast as hell, with regulary 59mb free ram resources, no lag, batery lasting 1 day of heavy use and one day and a half of mediun use. BENCHMARK with ATUTU: 1608. As it should be.
link added to my FAQ, thx for this
any tests are welcome
what are these? Alow Resource Free Ticked, Set up in iniciation ticked ? i can't seem to find them.
Great tweak bdw
emmanuelcassar said:
what are these? Alow Resource Free Ticked, Set up in iniciation ticked ? i can't seem to find them.
Great tweak bdw
Click to expand...
Click to collapse
--> allow purging of assets
--> set on boot
pedrocel85 said:
Update:
Supercharger v8 Memory optimize script.
1 Download SCRIPT MANAGER FROM MARKET
2 Go to this thread and download SuPERCHARGER SCRIPT
3 Open program, load the script, Tick option set on boot. there's a problem here, in the original thread it is written run as root but DO NOT run this script at boot!!!
4 in program dialog, type "1(fast)" and "enter"
5 In main Dialog, type "2" agressive one" and "enter"
6 Hit back button, click in run in background.
7DONE
Click to expand...
Click to collapse
trying now... tests results tomorrow
please man, correct that and it will be fine
matmutant said:
trying now... tests results tomorrow
please man, correct that and it will be fine
Click to expand...
Click to collapse
I can not change the version of busybox!
Every time I make the change, it always returns the old value!
Is there a secret to it, or is it impossible?
Gustavo RD78 said:
I can not change the version of busybox!
Every time I make the change, it always returns the old value!
Is there a secret to it, or is it impossible?
Click to expand...
Click to collapse
I just did not try
everything worked ^^
matmutant said:
I just did not try
everything worked ^^
Click to expand...
Click to collapse
Sorry but my English is very bad! : s
Let's get this straight ...
... you also failed to change the busybox?
The description says the supercharger need busybox 1.18.2 or lower, because there may be errors, which are not errors.
I'll try to run the script with the version you have (1.19.1-static CM71)
Gustavo RD78 said:
Sorry but my English is very bad! : s
Let's get this straight ...
... you also failed to change the busybox?
The description says the supercharger need busybox 1.18.2 or lower, because there may be errors, which are not errors.
I'll try to run the script with the version you have (1.19.1-static CM71)
Click to expand...
Click to collapse
i'm using embedded busybox of CM7 2.1.1 by nAa and his kernel
(don't know which one but i don't care since it worked without any problem ^^)
matmutant said:
i'm using embedded busybox of CM7 2.1.1 by nAa and his kernel
(don't know which one but i don't care since it worked without any problem ^^)
Click to expand...
Click to collapse
worked! ! Thank's
Sent from my X10mini using Tapatalk
pedrocel85 said:
Update:
Supercharger v8 Memory optimize script.
1 Download SCRIPT MANAGER FROM MARKET
2 Go to this thread and download SuPERCHARGER SCRIPT
3 Open program, load the script, Tick option run as ROOT.
4 in program dialog, type "1(fast)" and "enter"
5 In main Dialog, type "2" agressive one" and "enter"
6 Hit back button, click in run in background.
7DONE
Click to expand...
Click to collapse
now your tut is great
something i do in a different way you did :
1 Download SCRIPT MANAGER FROM MARKET
2 Go to this thread and download SuPERCHARGER SCRIPT
3 Open program, load the script, Tick option run as ROOT.
4 in program dialog, type "1(fast)" and "enter"
5 In main Dialog, type "2" agressive one" and "enter"
6 type 17 (exit) and then "enter" -->at the top you see: running becoming exit code0
7 press "close" (it was "kill" while the script was running)
8 reboot
9 now your phone uses supercharger, you don't need to run it again
if you want to undo this :
1 run the cript
2 choose 1 (fast)
3 choose 14 (UnSuperCharger)
5 wait
6 type 17 (exit) and then "enter" -->at the top you see: running becoming exit code0
7 press "close" (it was "kill" while the script was running)
8 reboot
9 now your phone uses no more supercharger.
i don't know if it is a better way, but it's mine
[email protected]
the supercharge stick after reboot or did u use 98kernel?
ChavitoArg said:
the supercharge stick after reboot or did u use 98kernel?
Click to expand...
Click to collapse
It sticks after reboot. It will only go away if you undo or instal new rom.
ChavitoArg said:
the supercharge stick after reboot or did u use 98kernel?
Click to expand...
Click to collapse
here is the answer
matmutant said:
9 now your phone uses supercharger, you don't need to run it again
if you want to undo :
1 run the cript
2 choose 1 (fast)
3 choose 14 (UnSuperCharger)
5 wait
6 type 17 (exit) and then "enter" -->at the top you see: running becoming exit code0
7 press "close" (it was "kill" while the script was running)
8 reboot
9 now your phone uses no more supercharger.
Click to expand...
Click to collapse
maybe it wasn't so clear :S
matmutant said:
here is the answer
maybe it wasn't so clear :S
Click to expand...
Click to collapse
thanks for the sarcasm, lol. but before whit the old versions of MiniCM those values doesnt stick after the reboot-
ChavitoArg said:
thanks for the sarcasm, lol. but before whit the old versions of MiniCM those values doesnt stick after the reboot-
Click to expand...
Click to collapse
sorry
i didn't try with miniCM6 or with miniCM7 2.0.8 and before ^^
i didn't know that didn't stay after reboot
that wasn't really a sarcasm,
i know my english isn't so good, you could have not understood
ChavitoArg said:
thanks for the sarcasm, lol. but before whit the old versions of MiniCM those values doesnt stick after the reboot-
Click to expand...
Click to collapse
They do sticky.
Do a litle test over there.
Open script manager, aply agressive settings, wait, close program, reboot.
After a reboot, open program again.
You will see the OOM values you set will still be there.
best,
pedro
matmutant said:
sorry
i didn't try with miniCM6 or with miniCM7 2.0.8 and before ^^
i didn't know that didn't stay after reboot
that wasn't really a sarcasm,
i know my english isn't so good, you could have not understood
Click to expand...
Click to collapse
No problem men, i speak spanish btw
with te previous versions of MiniCM7 the values doesnt stick after reboot, you have to use 98kickasskernel script to make it work. Now works just running the V6 script, and the values stick
is it best to enable compache? what's the effect on the device?
emmanuelcassar said:
is it best to enable compache? what's the effect on the device?
Click to expand...
Click to collapse
compcache works only if you have nAa04 and miniCM7-2.1.2
it will increase RAM (virtually) but uses CPU to "zip-unzip" the data in the compcached RAM part
Greetings - I have ADW launcher installed on my NT...I select the little box icon at the botom of the screen to get me to my apps...I select tgps_launcher and gets me to the home screen where(START/STOP box)... I select START which gets me to the Application settings(Unknown sources, Manage Applications, Running services, etc...)...Let's say I select Running services(doesn't matter which setting I select)...Then I select ADW.Launcher(again doesn't matter which one) & get a screen where I can click on Force stop, Uninstall, Clear data, etc...
I then double click the "n" to get me to my ADW home screen & start all over...
When I select tgps_launcher I no longer get the home screen(START/STOP box), but instead it gets me to the last operation I performed, which is the ADW screen where I can click on Force stop, Uninstall, Clear data, etc...
I'm forced to reboot my NT in order to get the /START/STOP screen when clicking tgps_launcher...How can I get back to the /START/STOP screen without having to reboot?...
Thank you...
Use NT HIDDEN SETTINGS app- developing section.
~ Veronica
Sent from XDA premium using my Nook Tablet
If you haven't installed the modified SystemUI.apk you can swipe right to left in the status bar to go back.
Edit: you can still do this with the modified SystemUI, but it's mostly useful if you haven't done that mod.
Sent from my BNTV250 using Tapatalk
Than you ckevinwelch...that did it...much appreciated...
(would be easier had the back arrow been visible in the status bar)...
i don't mean to be a pain, but have a couple of follow-up questions...
1) when i rooted my NT(indirect's method) the instr. indicated to un-check the box for "Auto Mount" under the "Development" section of the hidden settings...i noticed it is checked now...should it be?...is that an issue?...
2) when i select the "On SD Card" under "Running Services" i find the apps i had previously downloaded even though i don't have an SD card installed...why is that?...
Again, thank you for your help...
Not sure about number 2, but as for number 1, that is the normal (not necessarily "desired", but "normal") behavior.
download button savior from market
it will place a indiscreet back button permanently on the right side of your screen. it also has menu and home button on it.
to disable the automount from re mounting on reboot go here
http://forum.xda-developers.com/showpost.php?p=21874676&postcount=1
promek many thanks...greatly appreciate the instructions...
i will definitely try it out...one quick question: how do i set /system to read-write?
do you(or anyone) has any ideas about question #2?...
thank you everyone for the help...this is an awsome site!!!...
thesal523 said:
promek many thanks...greatly appreciate the instructions...
i will definitely try it out...one quick question: how do i set /system to read-write?
do you(or anyone) has any ideas about question #2?...
thank you everyone for the help...this is an awsome site!!!...
Click to expand...
Click to collapse
First, you might want to change the title of this thread since your question was resolved.
As for your second issue, I'm not exactly sure what you are seeing, but "On SD Card" and "Running Services" are two separate tabs of the Manage Applications program. Perhaps you are confused because there are two ways to get in there, one of which is titled "Running Services." I think "On SD Card" is really apps that have been installed to the internal B&N storage area (which is the default), though I'm not positive about that.
How do I set /system to read-write?
I need to set /system to read-write in order to disable the AUTOMOUNT from re-mounting on reboot...How do I accomplish that?...Thank you...
There is a thread about disabling auto-mount. I don't know if it works, but you might want to read it. Link.
yes it works i did it on mine
on root explorer on top press mount r/w to enable read write.
How do I set /system to read-write?
I have ES File Explorer installed...Is that the same as Root Explorer?...
I select ES File Explorer and I can position myself on either /, /root, /system
directories but I don't see where I can select mount r/w to enable read write....
Sorry for the confusion, but I'd really like to get this resolved...
Thank you...
Hi guys,
just one question, search for it but didnt found a solution jet.
I set Under Settings -> Developer options -> Background process limit there is some options to choose. I´m unsig etc."At most, 3 processes". But, after rebooting the device, the option reset itself to "standard limit".
Is it possible to set any command as an startup file in the init folder, that after every restart it will be "4 processes" instead of "standart" ???
I hope to get some help, thanks !!!
Did you try SystemTuner Pro?
It have option to add int.d scripts at boot.Im using it and i'm almost sure that it have
and option to set and this you need or someting simmilar to that.
gencho81 said:
Did you try SystemTuner Pro?
It have option to add int.d scripts at boot.Im using it and i'm almost sure that it have
and option to set and this you need or someting simmilar to that.
Click to expand...
Click to collapse
I do not think it's on there, I need only script
gencho81 said:
Did you try SystemTuner Pro?
It have option to add int.d scripts at boot.Im using it and i'm almost sure that it have
and option to set and this you need or someting simmilar to that.
Click to expand...
Click to collapse
Hi! I'm loocking for this Script, but I don't find it.
Someone can Post it? Thanks in advance.
https://play.google.com/store/apps/details?id=ccc71.pmw
gencho81 said:
https://play.google.com/store/apps/details?id=ccc71.pmw
Click to expand...
Click to collapse
Thanks, but the App is understandable. Too much unnecessary settings for me.
I'm looking for a simple script to insert in init.d.
Inviato dal mio GT-I9000
Finally figured this out, man was it annoying.
I need it for my 2012 Nexus 7 running Android 5.1.1
It was running slower than molasseses until I changed the data partition to f2fs (make sure you have a kernel and ramdisk that support f2fs!) and enabled this tweak.
It can be done with root access with a single command.
service call activity 51 i32 x
Where x is the number of background processes you want.
If the API changes in the future, it's easy to look it up again.
http://grepcode.com/file/repository...4.4_r1/android/app/IActivityManager.java?av=f
Look for the line with SET_PROCESS_LIMIT_TRANSACTION
Then just extrapolate that info to http://grepcode.com/file/repository...ERSION/android/app/IActivityManager.java?av=f
Replacing DESIRED_ANDROID_VERSION with the version you're interested in.
Any solution you found?
I used to have this script,But now I do not have but him and I'm looking again, in case I remember him I'll share it here. I'm just here to warn you that it is possible and use the settings command, but I only remember that.
https://i.imgur.com/qfuKKFQ.jpg <- Here's what I get.
I downloaded release_Remix_OS_for_PC_64_B2016020201_Alpha_EFI.zip from the Official Website. Opened the tool inside, and copied the files into my USB 3.0 flash drive using it. Write speeds are higher than 20MB/s. I have a UEFI BIOS. I get the same thing on both Resilient mode and Guest mode. I selected Resilient mode on first launch and the system went through the first launch steps.
When you get to the boot choice of RemixOS remove 'quiet' from the line when TAB and then 'e' for editing it, to show what's going on @ boot time.
most time we solve this by deleting recreating data.img
I hope that helps you
ecksdeeay said:
When you get to the boot choice of RemixOS remove 'quiet' from the line when TAB and then 'e' for editing it, to show what's going on @ boot time.
Click to expand...
Click to collapse
I did that. But this is all I could take a picture of. http://i.imgur.com/7rseNNe.jpg I have no clue what any of it means.
I opened it in guest mode.
imadlatch said:
most time we solve this by deleting recreating data.img
I hope that helps you
Click to expand...
Click to collapse
I dont know how to do that. I cant seem to be able to open the ISO that was in the zip file I downloaded. However, I formatted my flashdrive and used the included tool to reinstall Remix OS. It didnt help.
on the edit line you removed 'quiet' from, put 'DEBUG=1' or just put the '1' on the DEBUG= if it's showing ? I forget if it is but it will go through like before but this time will stop twice where you have to type 'exit' for it to proceed (twice-I repeat!) maybe that'll help? or @imadlatch is more than likely correct?
ecksdeeay said:
on the edit line you removed 'quiet' from, put 'DEBUG=1' or just put the '1' on the DEBUG= if it's showing ? I forget if it is but it will go through like before but this time will stop twice where you have to type 'exit' for it to proceed (twice-I repeat!) maybe that'll help? or @imadlatch is more than likely correct?
Click to expand...
Click to collapse
Here's what I got doing that. http://imgur.com/a/SL1rQ
I never got the second exit prompt. I just got the errors in this https://i.imgur.com/sGo2EQ5.jpg image over and over.
SELinux error. When installing on hardrive the selinux command is passed to the boot line (I'm only guessing here but if you could maybe add this) 'androidboot.selinux=permissive' worth a try?...what are you using as your machine? send feedback from here http://goo.gl/kt1bwC using the Google form https://goo.gl/pcRswT
ecksdeeay said:
SELinux error. When installing on hardrive the selinux command is passed to the boot line (I'm only guessing here but if you could maybe add this) 'androidboot.selinux=permissive' worth a try?...what are you using as your machine? send feedback from here http://goo.gl/kt1bwC using the Google form https://goo.gl/pcRswT
Click to expand...
Click to collapse
androidboot.selinux=permissive is present there by default. Im using a lenovo ideapad y510P with core i7 4700MQ, 8 Gigs of RAM and dual Nvidia GT 755M.
incognitonk said:
Nvidia GT 755M.
Click to expand...
Click to collapse
Nvidia is the problem then. ...
ecksdeeay said:
Nvidia is the problem then. ...
Click to expand...
Click to collapse
Really? Oh well, guess Im gonna be playing the waiting game then.
Thanks for everything up until now.
Search as I think there are work arounds @incognitonk
incognitonk said:
https://i.imgur.com/qfuKKFQ.jpg <- Here's what I get.
I downloaded release_Remix_OS_for_PC_64_B2016020201_Alpha_EFI.zip from the Official Website. Opened the tool inside, and copied the files into my USB 3.0 flash drive using it. Write speeds are higher than 20MB/s. I have a UEFI BIOS. I get the same thing on both Resilient mode and Guest mode. I selected Resilient mode on first launch and the system went through the first launch steps.
Click to expand...
Click to collapse
Its look like its because of your nvdia GPU isssue , don't worry we have solution for this
Select resident mode , don't press enter , press tab you will get into edit mode.
At the end after space write this line - " nomodeset vga = 0x34C "
Without the quote .
Press enter , enjoy remix ☺☺
Hit thanks if it help
mdezazrock said:
Its look like its because of your nvdia GPU isssue , don't worry we have solution for this
Select resident mode , don't press enter , press tab you will get into edit mode.
At the end after space write this line - " nomodeset vga = 0x34C "
Without the quote .
Press enter , enjoy remix ☺☺
Click to expand...
Click to collapse
Thank you, It definitely did help. However the resolution is all wonky now. I have a 1080p screen. The images are all grainy and stretched out. Also, i can see the linux prompt blinking in the background. Anything I type on the keyboard will be entered there. Hence, if i type "reboot" and hit enter, the system will reboot.
I also tried the workarounds in this reddit post: https://www.reddit.com/r/RemixOS/comments/42wylw/any_way_to_run_with_nvidia_gpu/czenutg
But none of them helped either. I get the same issues; the poor resolution and the blinking prompt.
incognitonk said:
Thank you, It definitely did help. However the resolution is all wonky now. I have a 1080p screen. The images are all grainy and stretched out. Also, i can see the linux prompt blinking in the background. Anything I type on the keyboard will be entered there. Hence, if i type "reboot" and hit enter, the system will reboot.
I also tried the workarounds in this reddit post: https://www.reddit.com/r/RemixOS/comments/42wylw/any_way_to_run_with_nvidia_gpu/czenutg
But none of them helped either. I get the same issues; the poor resolution and the blinking prompt.
Click to expand...
Click to collapse
I don't know the blinking error solution , my friend also have that same problem , but there is a easy solution for resolution -
Root remix os , open any rooted browser , go to system folder , then open build.prop , edit the file , just add a line at the end
"ro.sf.lcd_density=150"
Write that line without quote , save build.prop , and change the number between 140 to 210 , see which one looks better on your monitor , have fun exploring remix ☺