Related
PLease can anyone let me know the process to load a rom onto a HD2 that will not boot up....? Windows mobile device center will not detect it either. Bootlogger screen says I have SPL-2.08.HSPL 8G XE, and underneath it says CotullaHSPL if that is any help. I would really appreciate any help!
lisah456 said:
PLease can anyone let me know the process to load a rom onto a HD2 that will not boot up....? Windows mobile device center will not detect it either. Bootlogger screen says I have SPL-2.08.HSPL 8G XE, and underneath it says CotullaHSPL if that is any help. I would really appreciate any help!
Click to expand...
Click to collapse
After task 29 you have to flash a ROM. Task 29 wipes your device so if you don't hold down the volume down key at the end of task 29 it will not have any operating system. Just remove the battery and hold down the volume down key till you see the bootloader screen. Then flash your ROM and all is ok.
after task29,when your device reboot
press botton "volume down" and will go in bootloader mode
now if you have your device stuck in white screen,remove battery cover
press red botton for softrest and press "Volume down" botton
bobsbbq said:
After task 29 you have to flash a ROM. Task 29 wipes your device so if you don't hold down the volume down key at the end of task 29 it will not have any operating system. Just remove the battery and hold down the volume down key till you see the bootloader screen. Then flash your ROM and all is ok.
Click to expand...
Click to collapse
opsss..sorry bob
i have look now your post
My problem is that the windows mobile says that the phone is not connected?
What do I do now?
Thanking you in advanced,
Henry
kikimax said:
My problem is that the windows mobile says that the phone is not connected?
What do I do now?
Thanking you in advanced,
Henry
Click to expand...
Click to collapse
It won't because you're in the bootloader. Does it say USB at the bottom of the bootloader screen? As long as it says USB when the phone is plugged into your computer, flash a ROM and be happy
Hello!
And what if my hd2 not entering into the boot loader?
Thanx in advance
There is only one way to get into the bootloader.
Hold down volume and keep it down....
After that press the start button and your phone will boot up.
Now you will see the tree colored screen and you're in the bootloader.
Goodluck.
same problem..connected to pc but wmdc doesn't discover it so i can't flash anything.and sd card flash doesn't help.what can i do now?
wopin80 said:
same problem..connected to pc but wmdc doesn't discover it so i can't flash anything.and sd card flash doesn't help.what can i do now?
Click to expand...
Click to collapse
When you are in the bootloader screen, connect the phone to the computer /with the usb cable/ on the same bootloader screen it will change to USB - look at the bottom of the screen:
Open the folder - on your computer - where the ROM you want to flash is:
find the "RomUpdate*.exe" or "Install.exe" /if Android it will most likely say "DAF.exe" - run it as Administrator/ file and run it. Do as it says on the screen.
Do not disconnect the cable, do not touch the device. When it is finnished it will restart the device, disconnect the cable and enjoy your new OS.
wopin80 said:
same problem..connected to pc but wmdc doesn't discover it so i can't flash anything.and sd card flash doesn't help.what can i do now?
Click to expand...
Click to collapse
use a <4gb or preferably <2gb sd card - class 4 or 2 with LEOIMG.nbh.
HSPL3_pkg after that - make sure .nbh (as above on sd root) is your stock and you CLEAN-reinstall bootloader.
ps:
Then hspl, then radio, then magldr, then windows 7, the hacks, then call M$= LIVE!
Hi guys i have a similar problem. After task 29 i went into the bootloader but can't install any rom whatsoever. I have SPL 3.03 on my devide, mind no not hard spl but SPL. Can anyone please help me solve this issue? I also tried to flash using sd card but it doesn't work. Please help me save my hd2. Thanks in advance.
tmo-hd2 wont go into bootloader after task29
Hi guys, i am facing exact same thing which dannytgt faced (http://forum.xda-developers.com/show...count=1)...but with no luck what so ever.....was running a stock rom in my hd2 3.14....wanted to try wp7 and did a task29....after that...hd2 doesnt go into bootloader screen....tried all possible combinations with/without sd,sim, holding vol down, vol up, both with power tapped...power holded etc etc...hd2 always goes into stick together screen and doesnt progress as there is os to load....opened up the mobile and tried with a pin to push the vol down switch directly also....all hardware keys were working gr8 (including vol down and up and power keys) whn win 6.5/android was running.
i know for the fact that this is reversable....if only my hd2 can get to bootloader...i will hv os running in a jiffy....
any ideas ppl? my hd2 is 3 months old ...no warrenty cos i bought it in US and using it in india..
bootloader dont load
some more details...tried to task29 (doloop) with 100% success and then my tmo hd2 wont go into bootscreen what ever i do...its stuck for ever in "stick together"...i know there is no os to load...but i dont understand y cant my hd2 go intobootloader
so far i tried
with holding volume down and power key with a single tap
with holding volume down and holding power key
with holding volume down, volume up and power key with a single tap
with holding volume down and reset button
with/without sim
with/without SD
with/without plug in wall charger
with/without plug to pc via usb cable
observations...when i pull out the battery and put it back in and then connect to computer when the phone is still off....the charging indicator LED glows in orange.
when in this mode if i switch the phone on with power/end key....it doent start...i have to pull the usb out, the orange LED still glows...and if i tap the power/end key nothing happenes...i have to pullout the battery to get it to start and eventually get stuck in "stick together"..
would really appriciate if any1 can help me get my hd2 into bootloader screen...
gdsbalaji said:
some more details...tried to task29 (doloop) with 100% success and then my tmo hd2 wont go into bootscreen what ever i do...its stuck for ever in "stick together"...i know there is no os to load...but i dont understand y cant my hd2 go intobootloader
so far i tried
with holding volume down and power key with a single tap
with holding volume down and holding power key
with holding volume down, volume up and power key with a single tap
with holding volume down and reset button
with/without sim
with/without SD
with/without plug in wall charger
with/without plug to pc via usb cable
observations...when i pull out the battery and put it back in and then connect to computer when the phone is still off....the charging indicator LED glows in orange.
when in this mode if i switch the phone on with power/end key....it doent start...i have to pull the usb out, the orange LED still glows...and if i tap the power/end key nothing happenes...i have to pullout the battery to get it to start and eventually get stuck in "stick together"..
would really appriciate if any1 can help me get my hd2 into bootloader screen...
Click to expand...
Click to collapse
Isn't it ironic: Stick together!...
There is a guide on How to get back from WP7 here on the forum.
First i would sugest to reformat the card from WP7 bul...
If i understand correctly, you can't get into bootloader or magldr!?
So you can't do nothing?
You can try this sollution and if it doesn't work, go to the service center to reset it totaly.
There was a guy with the same problem here:
Originally Posted by splinters69 View Post
This (or something similar) happened to me. I powered down my phone but did not take out the battery and it restarted the part that loads the win 7 rom while I still got the screen with the coloured bands on.
Try, taking out the battery for 10 seconds or so then put it in while holding the volume down key and powering up.
Got stock ROM back in first time but kiss goodbye to the data on your SD card. I had to use a Canon camera to reformat the card to get back the 14GB it was hiding.
This WORKED. Thanks a TON splinters69.
For future uses, this is what I did.
1. Took out the battery for about 30 seconds.
2. Put one of the LEOIMG.NBH on storage card
3. After putting the battery held the volume down button and pressed power button.
4. It went into HSPL mode straight away and started loading the win 6.5 OS.
You saved the day Splinters69. Thanks to Clydeb1 too for that modelIDcheckbypass.
http://forum.xda-developers.com/showthread.php?t=913081
lms1407 said:
Isn't it ironic: Stick together!...
There is a guide on How to get back from WP7 here on the forum.
First i would sugest to reformat the card from WP7 bul...
If i understand correctly, you can't get into bootloader or magldr!?
So you can't do nothing?
You can try this sollution and if it doesn't work, go to the service center to reset it totaly.
There was a guy with the same problem here:
Originally Posted by splinters69 View Post
This (or something similar) happened to me. I powered down my phone but did not take out the battery and it restarted the part that loads the win 7 rom while I still got the screen with the coloured bands on.
Try, taking out the battery for 10 seconds or so then put it in while holding the volume down key and powering up.
Got stock ROM back in first time but kiss goodbye to the data on your SD card. I had to use a Canon camera to reformat the card to get back the 14GB it was hiding.
This WORKED. Thanks a TON splinters69.
For future uses, this is what I did.
1. Took out the battery for about 30 seconds.
2. Put one of the LEOIMG.NBH on storage card
3. After putting the battery held the volume down button and pressed power button.
4. It went into HSPL mode straight away and started loading the win 6.5 OS.
You saved the day Splinters69. Thanks to Clydeb1 too for that modelIDcheckbypass.
http://forum.xda-developers.com/showthread.php?t=913081
Click to expand...
Click to collapse
I hvnt even instaled MGALDR yet....task29 and hd2 went into trouble...need to get to bootloader to save it now
Tried this as well before posting....hv a 2gb sd card>formatted to fat 32> stock rrunbh to leoimg.nbh > moved to root of sd card....but this can only work if bootloader can be initiated right? i cant get to boot loader
resolved the problem myself.....hd2 is working like a charm....thanks for all your support.
SOLVED {bootloader dont load}
checkout the solution for my problem here....might help u as well.
http://forum.xda-developers.com/showpost.php?p=10644926&postcount=4
______________________________
if you feel this helped...thank me
hi there i have realy big problem i have done that task 29 trick with the blackstone advangeruu and there was something wrong after restart so i pulled the battery out.
now my phone wont do any thing when i hold nowd the start button en volume down i know it has no os. but is there any way to get in the bootloader screen hope some one can help me beceasue i need my phone.
DeAdMaNwa said:
hi there i have realy big problem i have done that task 29 trick with the blackstone advangeruu and there was something wrong after restart so i pulled the battery out.
now my phone wont do any thing when i hold nowd the start button en volume down i know it has no os. but is there any way to get in the bootloader screen hope some one can help me beceasue i need my phone.
Click to expand...
Click to collapse
Man, did you say blackstone? You should go into Blackstone forum
To go into bootloader, turn off the phone. Press volume down button and the POWER ON button (not start button) at the same time until the screen appear. It works on both Leo and Black Stone
Goodluck
I flashed hardspl and ran an android rom for about 2 hours. then the phone freaked out, and now it will not boot past the pink tmobile splash screen. so i try reflashing hspl as well as normal 2.08 spl and nothing, now the phone wont leave the 3 color screen saying rom error. what gives and how can i get back to stock? thanks for the help
Try installing an original rom from sd card.
Try this
Take batt out reinsert
Hold vol down and keep pressing it now press and release power button
In rgb screen bootloader connect usb to pc ( should change from serial to usb as u connect the cable)
Flash hspl again
Download task 29 and run it progress bar at 99% hold vol down button as phone reboots to rgb bootloader screen
Flash stock HTC Rom 3.14
This should get ur winmo back
vlx600d said:
I flashed hardspl and ran an android rom for about 2 hours. then the phone freaked out, and now it will not boot past the pink tmobile splash screen. so i try reflashing hspl as well as normal 2.08 spl and nothing, now the phone wont leave the 3 color screen saying rom error. what gives and how can i get back to stock? thanks for the help
Click to expand...
Click to collapse
Sent from my HTC HD2 using XDA App
Take a pic, your description is a bit confusing.
Take a pic of whatever screen(s) u get and maybe we can help.
sounds like the OP didn't flash a new radio when tried to run android, can we get some more info on what you did?
Hello i got a problem im not sure but i think i bricked my phone i dont really know how to expalin it either, well i want it to update it so i downloaded update from htc website for sprint but i think i had to download it for hero G2 with i found later so i installled it i had an error phone turned off now i cant do anything with it it wont turn on only vibrate 5 times? if i connect it with usb laptop wont see it i cant boot it or nothing but when i put it on charge it heats up? any ideas?
Sounds like a brick to me... Do you get any output on screen, what OS are you using on your PC, any response from it ?
nothing happens when i use usb cable and windows 7. Today when i was trying to turn my phone on again power on/off + home it vibrated 5 times?
Pull out your battery, plug it back in, hold POWER+VOL DOWN, and it sould take you to HBoot, if you cant do that then im very sorry and your phone is hard bricked...
i was wondering would that work?
How to flash stock ROM through SD-Card
*This only works with current stock ROM or newer version. Downgrading will fail till we have SuperCID. More about that in here!
1. Run the RUU and get the rom.zip from it. (Find it in here "c:\users\%usrename%\appdata\temp\")
2. Copy rom.zip to the SD-Card and rename it to PJ46IMG.zip
3. Put the SD-Card in the card reader.
4. Put the card reader onto the USB Y-Cable.
5. Plugin the USB Y-Cable to your One X.
6. Hold volume down and press the power button while keeping the volume down pressed. This will get you into HBOOT.
7. Wait a couple of seconds and you'll see that it finds PJ46IMG.zip
8. Follow the instructions on your screen =)
Barteko96 said:
i was wondering would that work?
How to flash stock ROM through SD-Card
*This only works with current stock ROM or newer version. Downgrading will fail till we have SuperCID. More about that in here!
1. Run the RUU and get the rom.zip from it. (Find it in here "c:\users\%usrename%\appdata\temp\")
2. Copy rom.zip to the SD-Card and rename it to PJ46IMG.zip
3. Put the SD-Card in the card reader.
4. Put the card reader onto the USB Y-Cable.
5. Plugin the USB Y-Cable to your One X.
6. Hold volume down and press the power button while keeping the volume down pressed. This will get you into HBOOT.
7. Wait a couple of seconds and you'll see that it finds PJ46IMG.zip
8. Follow the instructions on your screen =)
Click to expand...
Click to collapse
Biggest question is - can You go into fastboot mode? Because there is a way to flash Your phone is You can go into fast boot, and there should be a manual somewhere here, not using One X, but hero ;]
Let us know, does the phone respond by going into fastboot.
Additionaly : how did You downloaded firmware for sprint, as You should give IMEI number on HTC site.
brat.haneq said:
Biggest question is - can You go into fastboot mode? Because there is a way to flash Your phone is You can go into fast boot, and there should be a manual somewhere here, not using One X, but hero ;]
Let us know, does the phone respond by going into fastboot.
Additionaly : how did You downloaded firmware for sprint, as You should give IMEI number on HTC site.
Click to expand...
Click to collapse
i cant go in fastboot mode it only vibrates :/ and i went on to some forum and they had link to download it :x
Barteko96 said:
i cant go in fastboot mode it only vibrates :/ and i went on to some forum and they had link to download it :x
Click to expand...
Click to collapse
bricked
Hey i have the t mobile htc hd2, and i had it for quite a while. for the past year i had a windows 6.5 energy rom installed and from the last month a had battery issues. the phone whould be locked and die in 4-5 hours. i thought it was the energy rom and i decided to install magldr so i can install android on my htc phone. i have no idea whats the hspl or radio because i haven't flashed my htc in a long time.... i just installed magldr from the energy rom.... once i did that my htc would get stuck on ad recovery go go go and now i am only able to launch windows 7. when i try to nand android it gets stuck at boot. i want to change my phone back to its original state but i cant get to the tri color screen. i tried vol down then pressing power and i tried turning phone off and hold vol down and pressing the reset button, but my phone doesn't turn on when i press the yellow reset button.
mrflasha said:
Hey i have the t mobile htc hd2, and i had it for quite a while. for the past year i had a windows 6.5 energy rom installed and from the last month a had battery issues. the phone whould be locked and die in 4-5 hours. i thought it was the energy rom and i decided to install magldr so i can install android on my htc phone. i have no idea whats the hspl or radio because i haven't flashed my htc in a long time.... i just installed magldr from the energy rom.... once i did that my htc would get stuck on ad recovery go go go and now i am only able to launch windows 7. when i try to nand android it gets stuck at boot. i want to change my phone back to its original state but i cant get to the tri color screen. i tried vol down then pressing power and i tried turning phone off and hold vol down and pressing the reset button, but my phone doesn't turn on when i press the yellow reset button.[
1.First,download a stock t-mobile rom
2.Hold down volume down key while pressing the power key.
3.Connect cable to the phone and wait for usb to connect.
4.Run your rom and wait for it to finish, done.
Click to expand...
Click to collapse
First boot into magldr menu by pressing and holding the power key and scroll to usb flasher( 5 )
Connect the usb cable and wait for drivers to install,now flash your RUU,that's it. Good luck.
Click to expand...
Click to collapse
Sorry, wrong, thats for flashing android / wp7, it doesnt work for ruu's.
samsamuel said:
Sorry, wrong, thats for flashing android / wp7, it doesnt work for ruu's.
Click to expand...
Click to collapse
Thank you very much for pointing it out to me,really appreciate it boss.
Hi all
Today I received my freelander px2. I tried to follow the instructions posted here http://www.pandawillforum.com/showt...-PX2-MTK8389-Quad-Core-(update-Sep-6th-2013)/ to flash the device to the latest clean ROM. I got to the "Download" stage. I clicked the "Download" button and connected my Freelander PX2 with the USB cable.
I was having some issues making Windows 7 actually pick up the "MTK" device and load the correct driver. So I was playing around with the drivers and disconnecting and reconnecting the Freelander PX2 (Whilst leaving the Flash tool on DOWNLOAD mode, which was waiting for me to connect the Freelander PX2)
I must have reconnected it several times in the process of trying to make Windows 7 recognise the device. When I looked at the flash tool I noticed it had got to around 57% with the progress bar and stopped. I can only assume I managed to get the MTK drivers installed correctly at some point but tablet didn't really tell me new software was being uploaded to it. So basically I didn't know the flash tool was sending the new software to the tablet when I must have disconnected it during the process.
I can only assume I've interrupted the NAND flash process? When I try to reconnect the tablet now, it says "USB Device Not Recognized". There doesn't seem to be much support anywhere on the internet for this specific device or issue.
I've tried holding the power button for 30 seconds.. nothing happens
I've tried holding the power button plus volume up button for 30 seconds.. nothing happens
There's also no USB disconnect sound when I hold the power button down? Surely a hard reset should trigger a USB disconnect sound in Windows.
What are my options at this stage? Is it completely dead?
EDIT: Ok, this was a bit strange. I left it yesterday morning and declared it dead. Today I woke up, switched my computer on and plugged it in using a different USB cable and the driver was automatically installed as "MTK preloader". I didn't try to switch the device on yet though, as I wasn't sure if it being recognized was by chance. I didn't ask questions. I just immediately started up the flash tool, hit "download" and re-plugged the USB cable. This time the software finished upload with 100% and a green circle. Then it automatically disconnected from the computer. I hit the power button and it needed some time to charge again (maybe it drained itself last time). A few minutes later the OS booted completely fine. I don't know which one of those things made it worked, the new USB cable or leaving it to discharge for a day.. I just don't know. I'm not taking any chances though, the USB cable is being binned.
Have you flashed the CWM recovery for the px2 yet?
What do you think about the new firmware? I think its alot snappier than the old one. The CWM recovery works a treat (but you have no usb cable lol ) so you cant flash it. If you do want to put the recovery on it, let me know i can help. Cheers
PX2 Bricked
Hi,
Glad you got yours working :good:
I have exactly the same problem and now mine is not reconised :crying:
How long does the flashing actually take ?
When I connected it again this morning it it reconised it and the flash toll started to work.
The green bar and red bars both went to 100% then nothing after 5 mons so I unplugged it.
Now its bricked again :crying:
Any advice guys please ?
Reset
Hi mate sorry to here of your problems. Try pressing the little button between the sim slots, if that doesnt work, press volume + and then power button and keep pressed until it starts. When you flashed it did you get the green circle at the end?
If you get it recognized again do this: ENSURE YOU HAVE FULL BATTERY AND DO NOT INTERUPT THE FLASHING
1/ Start tablet and connect usb data cable, ensure it is connected as Media device (MTP).
2/ Unpack PX2_PC_24-10-13 update to a folder of your choice.
3/ Start Flash tool and click scatter loading on the right, and go to your unpacked folder you made earlier and select MT6589_Android_scatter_emmc check ALL boxes at the bottom are selected.
4/ Now click on downlod button, then switch off tablet. It will either ask to load drivers or start the flashing process.Wait until you see the green circle.
5/ Restart tablet. ENJOY
If you want to put clockwork recovery on it do the following:
1/ Download Freelander_PX2_130717_CWM_recovery.img in post #162 at pandawill put it in a folder and copy MT6589_Android_scatter_emmc from the folder above to the same folder.
2/ Start tablet and connect usb data cable, ensure it is connected as Media device (MTP).
3/ Start Flash tool and click scatter loading on the right, and go to your Freelander_PX2_130717_CWM_recovery.img folder you made earlier and select MT6589_Android_scatter_emmc only recovery option should be checked. Dont worry about the red writing.
4/ Click download and switch off tablet, dont worry about the warning just go ahead anyway, it will only take a couple of seconds and you should see the green circle again.
5/ To check it worked press vol+ and power button to get to recovery ( should be blue text ) if it is congrats you have clockwork recovery.
6/ Enjoy your tablet
Hi,
Thanks for your help but I fear it may be terminal,as when I plug the usb in now I get nothing.
gonna try on a different computor later.
If that fails I fear my PX2 will be leaving via the upstairs window
---------- Post added at 04:43 PM ---------- Previous post was at 03:57 PM ----------
Well it wont even charge now !
I wonder if this could mean a hardware problem or a software not sure ?
Any Ideas guys ?
:crying::crying::crying::crying::crying:
PX2 revival
Hi bazza500, try pressing the reset button between the sim slots it has saved me a couple of times when i thought i had bricked mine.
If you go to the pandawill forum under MTK tablets you will find a thread there dealing with an updated by users flashable firmware with cwm recovery.
Then later if you get it up and running there is a solution to extend the internal memory from 1Gb to 2Gb which reduces the storage by 1Gb. Hope you get it running buddy. Cheers
A few tips
Windows 7 has a glitch where by if the path has Chinese characters in it the flash tool with crash/error. Extract everything to your desktop and delete the chinese characters in the folder names.
Also there's a driver error in Windows 7. Make sure you use the driver install tool to install the MTK drivers. Also make sure the driver is installed and the tablet is recognised before you run the flash tool. That's the error I made, I tried to get the drivers installed whilst running the flash tool and the firmware started flashing when I hadn't realized.
Unlike Samsung and Apple, most Chinese devices don't give you a fancy progress bar on the device. There's almost no feedback the tablet or phone being flashed in most cases.
Thanks for the help guys................
Got my replacement today but have hooked it up to updrade and there was about 3 x colours went to 100% on progress bar now nothing for 15 mins !
Is this normal ?
Well a massive fail again.
Gonna send thos one back and get my money back.
Always a bad idea to by cheap o suppose u het what u pay for.
Sent from my GT-N7000 using xda app-developers app
Ok been awhile but I now have a new one and managed to upgrade the rom.
Only one problem I keep losing phone signal ?
Any ideas?