I`ve found today a new site from SonyEricsson were`s a couple of files opensouce and there`s a X10_Donout_ R1EA029.tar.bz2.
Could this be firmware for our X10? If so, how can i install this on mine R2BA026?
You can find HERE
Thks
rendeiro2005 said:
I`ve found today a new site from SonyEricsson were`s a couple of files opensouce and there`s a X10_Donout_ R1EA029.tar.bz2.
Could this be firmware for our X10? If so, how can i install this on mine R2BA026?
You can find HERE
Thks
Click to expand...
Click to collapse
Looks like it, but it's older fw, so not sure you want to install it.
Sent from my X10i using XDA App
XperiaX10iUser said:
Looks like it, but it's older fw, so not sure you want to install it.
Sent from my X10i using XDA App
Click to expand...
Click to collapse
29 is old?! i`m on 26....
witch one is the latest firmware? and how can i install it since trough Update Service i have the latest?
Thks
Mine is R1FA014. Is it very old?
Sent from my X10i using XDA App
I believe R1 or older than R2
Donout
you just wrote it: Donut.. its android 1.6 ... the update is 2.1 - eclair
I'm a new user here. And I never done any update. Wondering how to update.
Sent from my X10i using XDA App
well...
i think with these last post i think my idea becomes important...
http://forum.xda-developers.com/showthread.php?t=807401
Coolzmok said:
I'm a new user here. And I never done any update. Wondering how to update.
Sent from my X10i using XDA App
Click to expand...
Click to collapse
Settings > About Phone > Software update
Make sure you're connected to your wifi as the update will be 150mb or so.
Alternatively, you can download Sony Ericsson update Service SEUS and update it that way.
If there is no update available on your carrier then you should probably try debranding - although I'm not sure if it voids the warranty of the phone in your country.
Got a stupid question here What is debranding?
rendeiro2005 said:
29 is old?! i`m on 26....
witch one is the latest firmware? and how can i install it since trough Update Service i have the latest?
Thks
Click to expand...
Click to collapse
R1 is older than R2 ;-)
Sent from my X10i using XDA App
Coolzmok said:
Mine is R1FA014. Is it very old?
Sent from my X10i using XDA App
Click to expand...
Click to collapse
Yes, run seus or PCC.
Sent from my X10i using XDA App
R1E is older than R2B ..
So, we still have to wait.
tuxStyle said:
R1E is older than R2B ..
So, we still have to wait.
Click to expand...
Click to collapse
thank you all for the ifo
By the way can someone explain me what R1...R2... mean? is this due the fact dates, coutrys?
Can`t someone here try to organize firmwares by release? I think this way would be very helpfull for all of us 10 asses
There is a thread that exists here which has all the firmwares according to countties written down...the 029 version u hav mentioned is the chinese or japanese rom...not sure which...just check...
Sent from my X10i using XDA App
I don't think they mean anything.
Probably only versions.
The list so far:
R1EA018
R1EA025
R1FA014
R1FA016
R1FB001
R2BA020
R2BA023
R2BA024
R2BA026
Some of them are SO-01B only or X10a/X10i only.
Tnks for this info bro ;-)
Sent from my X10i using XDA App
tuxStyle said:
I don't think they mean anything.
Probably only versions.
The list so far:
R1EA018
R1EA025
R1FA014
R1FA016
R1FB001
R2BA020
R2BA023
R2BA024
R2BA026
Some of them are SO-01B only or X10a/X10i only.
Click to expand...
Click to collapse
US AT&T X10a is R2CA016 (my phone)
Coolzmok said:
Got a stupid question here What is debranding?
Click to expand...
Click to collapse
Debranding is basically giving you a generic device rather than for example being on Orange, in which they have put apps on that they want, ( in my case it was traffic tv).
If you have a branded phone then you do not get updates as fast as a generic one
R1EA029
h t t p : / / www.ptcrb.com/ctiastaff/complete/view_complete_request.cfm?modelid=16719
It`s actual one, but JP soft for DOMOCO SO-01B.
Related
Here are the list of branded rom which are already decrypted, meaning that you can use flashtools to flash back to your Xperia X10. So you can root, debrand and play around with your X10 without fear that you cannot go back to your branded rom for any purpose like warranty claim.
Some of the link i take from Decrypted x10 roms.
This thread serves as a list of branded roms, while the other decrypted x10 roms thread serves as a last up to date list of ROMS that you can use to upgrade your X10. Hope this thread does not conflicts with each other
2.1 Firmware
X10a Generic WORLD - http://www.multiupload.com/FK20OSO84H
X10i Generic INDONESIA - http://hotfile.com/dl/83414883/e69095b/2.1_ROM_X10i_Indo.rar
X10i Generic UK - http://www.multiupload.com/TVLQVFW4OA
X10i UK Orange - http://www.multiupload.com/K1XB74M1WO
1.6 Firmware
X10i - Telenor R2BA020 - http://hotfile.com/dl/50396515/a7d6e8a/i_WWE_R2BA020_DEK.rar.html
X10i - SingTel R2BA020 - http://hotfile.com/dl/56041035/e47fadd/SingTel_WWE_R2BA020_DEK.rar.html
X10a - Latin America RB2BA026 - http://www.megaupload.com/?d=JOE29DZ0
X10a - Telcel Mexico RB2BA026 - http://dl.dropbox.com/u/14953652/X10a_R2BA026_TELCEL.rar
See my thread about how to make your own branded rom and i hope you upload and post it here.
[GUIDE] Decrypting your own branded ROM
http://forum.xda-developers.com/showthread.php?t=730282
And also, if next root update come, which means i might reset my whole phone and root, and configure all over again, i might as well help you guys decrypt your branded ROM.
Please upload somewhere like megaupload or hotfile (except rapidshare) for me to download, and later i will decrypt and post to this thread.
Could some kind soul please upload the X10i - SingTel R2BA020 file to a different host? Hotfile is a pain in the S!!!
Please? Thank you.
pinkmota said:
Could some kind soul please upload the X10i - SingTel R2BA020 file to a different host? Hotfile is a pain in the S!!!
Please? Thank you.
Click to expand...
Click to collapse
get your self a hotfile premium account. its really worth. a lot ****s are hosted in hotfile
Does anyone have the decrypted rom or the build.prop codes for an at&t x10a? I can't seem to decrypt it myself using seus.
Sent from my X10a using XDA App
Here is more easy Tool for decrypting.
Regards
Bin4ry
Usage:
SEUSDECRYPT.BAT FILE_XXXXXXXX -> That gives you a FILE_XXXXXX.tgz -> Unzip -> Then Untar the File which comes out
If you SEUSDECRYPT the small 64kb File you get directly the loader.sin no need to unzip and untar
All I have is the firmware files right now. I can't get seus or pc companion to work long enough to create the files to decrypt.
Will the decrypter allow me to skip that step?
Sent from my X10a using XDA App
Here is the decrypted X10i UK Generic 2.1 ROM
http://www.multiupload.com/TVLQVFW4OA
and
the decrypted X10i UK Orange 2.1 ROM
http://www.multiupload.com/K1XB74M1WO
for anyone who needs/wants them.
1.6 Generic Russia R2BA026
http://rapidshare.com/files/428373592/R2BA026_ru.rar
syxxfiggaz said:
Does anyone have the decrypted rom or the build.prop codes for an at&t x10a? I can't seem to decrypt it myself using seus.
Sent from my X10a using XDA App
Click to expand...
Click to collapse
+1
Sent from my X10a using XDA App
fightingroost12 said:
+1
Sent from my X10a using XDA App
Click to expand...
Click to collapse
Whats the SI number on the label under the battery?
delbuenno said:
Whats the SI number on the label under the battery?
Click to expand...
Click to collapse
1203-8161
Sent from my X10a using XDA App
fightingroost12 said:
1203-8161
Sent from my X10a using XDA App
Click to expand...
Click to collapse
Thats the number ON the battery, the SI number is printed on the label underneath the battery, just above the serial number of the phone.
delbuenno said:
Thats the number ON the battery, the SI number is printed on the label underneath the battery, just above the serial number of the phone.
Click to expand...
Click to collapse
oh woops sorry ill try again
Sent from my X10a using XDA App
delbuenno said:
Thats the number ON the battery, the SI number is printed on the label underneath the battery, just above the serial number of the phone.
Click to expand...
Click to collapse
1237-4604
Sent from my X10a using XDA App
fightingroost12 said:
1237-4604
Sent from my X10a using XDA App
Click to expand...
Click to collapse
I can't find the CDA (number to alter build.prop to), if you upload the three largest files from the fs_blob folder in SEUS I'll decrypt it for you.
delbuenno said:
I can't find the CDA (number to alter build.prop to), if you upload the three largest files from the fs_blob folder in SEUS I'll decrypt it for you.
Click to expand...
Click to collapse
thnx but unfortunatly i dont have those files anymore, i changed my build file to read as generic latin american for the 2.1 update and i didnt save the original db folder
Sent from my X10a using XDA App
fightingroost12 said:
thnx but unfortunatly i dont have those files anymore, i changed my build file to read as generic latin american for the 2.1 update and i didnt save the original db folder
Sent from my X10a using XDA App
Click to expand...
Click to collapse
Edit:
CDA: 1237-3761
Decrypted ROM: X10a - AT&T R2CA016 - http://www.multiupload.com/TNDA6OG60U
Erofich said:
1.6 Generic Russia R2BA026
http://rapidshare.com/files/428373592/R2BA026_ru.rar
Click to expand...
Click to collapse
mirror
http://narod.ru/disk/27101039000/R2BA026_ru.rar.html
Telstra Mobile X10a 1.6 R2BA023 Decrypted with flash tool
Hi Guys,
Here's the Telstra 1.6 branded firmware decrypted and ready to go.
http://hotfile.com/dl/84102448/950ab0d/AUS_Telstra_Mobile_X10a_1.6_R2BA023_Decrypted_FINAL.7z.html
Cheers,
8MM
2.0.A.0.504 Russian firmware
http://hotfile.com/dl/84041187/4d328d0/2.0.A.0.504_RUS.rar.html
Hi guys, I've added some usefull application that can be installed separately.
1. Skype
2. SmartKeyboard Pro
3. Sms Back & Restore
4. AppsOrganizer
5. TitaniumBackup
6. Root Explorer
7. Gallery 3D
8. Swype
Hello guys
Today i got a update message in my notificationbar. I clicked on it and it says a new software update availble. But its can only installed with a pc (no OTA). I connect my phone with seus and seus said there are a new software avaible 141mb. Before the update i am on 026 with seus, and after the update still on 026.
Its 1th april today lol? Anybody the same update today recieved?
Greetz hph
Sent from my X10i using XDA App
OP - i checked for updates myself today, i have nothing.
Im running R2BA026 Rooted if that helps.
nothing for me but i have had it do it to me last month saying there was an update and it just kept it on 026, PC Companion also does it sometimes too.
Wich baseband?
The same here. 1.1.31
yes 1.1.31
since that we have 026 i am on it maybe a little update
Me too. Don't know what it is though. Not around a PC
I updated. Can't tell any changes, still same Baseband and 026. Was flashed on generic SE Rom.
does one click root still work?
hphhaze said:
yes 1.1.31
since that we have 026 i am on it maybe a little update
Click to expand...
Click to collapse
Sent from my X10i using XDA App
ballubas said:
does one click root still work
Sent from my X10i using XDA App
Click to expand...
Click to collapse
Yes !?
Sent from my rooted 026 x10i using XDA App
great!
PoTi_96 said:
Yes !?
Sent from my rooted 026 x10i using XDA App
Click to expand...
Click to collapse
Sent from my X10i using XDA App
Hi Guys,
My friend just got an X10i with Optus Firmware.
He uses Vodafone, so I was wondering if there is a Vodafone Australia Firmware out there to flash over the optus to enable OTA updates through Voda.
Any help would be great.
Thanks Heaps
Get generic instead - much better. See here!
SaintyUK said:
Get generic instead - much better. See here!
Click to expand...
Click to collapse
Do you know which one Australia uses? I'm currently using the UK one but it's beginning to annoy me.
Sent from my X10i using Tapatalk
OP, if it would be possible would you please be able to upload the latest Optus firmware for me?
Findee said:
OP, if it would be possible would you please be able to upload the latest Optus firmware for me?
Click to expand...
Click to collapse
Go to my previous post here;
http://forum.xda-developers.com/showthread.php?t=763452
dangerzau gave the best instructions.
SaintyUK said:
Get generic instead - much better. See here!
Click to expand...
Click to collapse
It looks like the latest X10i for anything close to a generic Australia FW would be the UK Generic X10i Firmware (R2BA020).
Though we're all up to R2BA026 now.
Will I be able to update UK Generic X10i Firmware (R2BA020) afterwards?
Thanks heaps.
Bourbon Brain said:
Do you know which one Australia uses? I'm currently using the UK one but it's beginning to annoy me.
Sent from my X10i using Tapatalk
Click to expand...
Click to collapse
Why is the UK one annoying you????
kuri_2k said:
Go to my previous post here;
http://forum.xda-developers.com/showthread.php?t=763452
dangerzau gave the best instructions.
Click to expand...
Click to collapse
I have seen that but the links are dead for me.
Sent from my X10i using XDA App
Givenh how terrible Aussie carriers are at updating firmware, you'd be crazy to not go generic imho.
Sent from my U20a using XDA App
Actually, optus is quite good at it. They received updates regularly after the first one.
Sent from my X10i using XDA App
I've been wondering if the vodaphone AU package had an app to tell you your usage etc??
can anyone verify?
ta
Frank
Findee said:
I have seen that but the links are dead for me.
Sent from my X10i using XDA App
Click to expand...
Click to collapse
1. Register an account @;
http://www.omnius-server.com/
2. Then go to the following link;
http://www.omnius-server.com/download (Download Omnius v0.12 software and install)
3. Select Browse & Download
4. Select Flashes_SONY_ERICSSON
5.Select X10
6. Select R1FA016
7. Choose your desired Firmware and flash your mobile with Omnius (login to app using your registered account details).
8. Finally perform either an update OTA or through SE Update service, u'll have the latest branded FW afterwards.
ANYWAY... any voda firmware out there I can use to flash my friend X10?
If not, what generic FW would I use, the UK one huh?
Will SE Update software let me download the latest update afterwards?
Yes mate, you'll be able to update when the uk ota is sent out.
dangerzau said:
Yes mate, you'll be able to update when the uk ota is sent out.
Click to expand...
Click to collapse
OTA update with UK FWeven though im in Australia?!
Thats awesome!!! lol
Dude you're always answering my questions, you rock haha
I noticed that too. It's just you seen to have the same issues I've had previously. Lol
i used bin4rys flashtool to flash the nordic firmware onto my at&t x10a (it worked flawlessly btw) ive been seeing posts saying that because mine was originally an x10a i cant upgrade to 2.1 through pc companion. I also read that 2.1 will mess up my 3g, i have my 3g info written down and can manually put it in without any problems so would i still have a problem?
Sent from my X10i using XDA App
Same question here...
Sent from my X10i using XDA App
fightingroost12 said:
i used bin4rys flashtool to flash the nordic firmware onto my at&t x10a (it worked flawlessly btw) ive been seeing posts saying that because mine was originally an x10a i cant upgrade to 2.1 through pc companion. I also read that 2.1 will mess up my 3g, i have my 3g info written down and can manually put it in without any problems so would i still have a problem?
Sent from my X10i using XDA App
Click to expand...
Click to collapse
No, bin4ry says the radios are different and whatnot. You didn't read the other threads. Best to wait and let the devs take a look at the firmwares first rather than blindly flashing.
Go back to a legitimate x10a firmware and wait -- otherwise yes there is a possibility that you wont be able to upgrade through SEUS at all.
-.- well in a way this works out cause now i finally have "allow non market access" as an option. Soooo our best option is to wait for a flashtool for 2.1?
Sent from my X10i using XDA App
mik101 said:
No, bin4ry says the radios are different and whatnot. You didn't read the other threads. Best to wait and let the devs take a look at the firmwares first rather than blindly flashing.
Go back to a legitimate x10a firmware and wait -- otherwise yes there is a possibility that you wont be able to upgrade through SEUS at all.
Click to expand...
Click to collapse
grrr what would u reccomend ?? latin american?
Sent from my X10i using XDA App
fightingroost12 said:
grrr what would u reccomend ?? latin american?
Sent from my X10i using XDA App
Click to expand...
Click to collapse
Is there any Generic ones we can put on our phones?
can x10a people try and see if it works?
Nimche said:
Is there any Generic ones we can put on our phones?
Click to expand...
Click to collapse
theres a generic latin american one
Sent from my X10i using XDA App
lawonga said:
can x10a people try and see if it works?
Click to expand...
Click to collapse
lol im not being another guine pig
Sent from my X10i using XDA App
It does NOT. You can flash your phone with Nordic but you can NOT go anywhere from there on. Because SEUS will tell you that you have the latest FW and PCC says that can not download the file for you phone,
fightingroost12 said:
theres a generic latin american one
Sent from my X10i using XDA App
Click to expand...
Click to collapse
Could you link please?
Nimche said:
It does NOT. You can flash your phone with Nordic but you can NOT go anywhere from there on. Because SEUS will tell you that you have the latest FW and PCC says that can not download the file for you phone,
Click to expand...
Click to collapse
boo that means i have to wait
Nimche said:
Could you link please?
Click to expand...
Click to collapse
i got this from the tutoral at xperiax10.net unfortunatly i dont know how to flash this thing on my phone http://www.megaupload.com/?d=HUBU6M9D
Sent from my X10i using XDA App
fightingroost12 said:
i got this from the tutoral at xperiax10.net unfortunatly i dont know how to flash this thing on my phone http://www.megaupload.com/?d=HUBU6M9D
Sent from my X10i using XDA App
Click to expand...
Click to collapse
All developers know that, and I am still to find out. I bet there should be an instruction to do it with out debranding method whichdoesn't work anymore.
Thank you
anyone able to get seus to update/repair nordic firmware with some proxy server trickery?
Nimche said:
All developers know that, and I am still to find out. I bet there should be an instruction to do it with out debranding method whichdoesn't work anymore.
Thank you
Click to expand...
Click to collapse
np i have the flash tool but im afraid to do it, i dont want to brick my phone again
Sent from my X10i using XDA App
dan-htc-touch said:
anyone able to get seus to update/repair nordic firmware with some proxy server trickery?
Click to expand...
Click to collapse
could you share your proxy informaiton. Bin4ry told me about it but I could;t figure out. Do you mind shareing.
fightingroost12 said:
np i have the flash tool but im afraid to do it, i dont want to brick my phone again
Sent from my X10i using XDA App
Click to expand...
Click to collapse
do you have flash tool for what FW? I don't mind bricking more.
Nimche said:
do you have flash tool for what FW? I don't mind bricking more.
Click to expand...
Click to collapse
i have the x10flash but idk how to use it, i used the nordic flash bin4ry made yesterday and it bricked my cell, i reran it and it fixed my cell, but still i was s.o.o.l. because seus and pc companion wouldnt help, so idk what to do (yea i shouldve looked this stuff up before blindly flashing i know)
Sent from my X10i using XDA App
Can anyone with x10a verfity that the nordic flash method gets you 2.1?
do i need to unroot it before updating or is it okay?
its branded singtel...not using any custom rom...just rooted it.
You don't have to unroot to upgrade....but when u upgrade you will lose root....which is easily solved using super one click.
Sent from my X10a using XDA App
thanks a lot!
updating now
its a 162 mb update.
dunno if i ll get multitouch
Nocturnal310 said:
thanks a lot!
updating now
its a 162 mb update.
dunno if i ll get multitouch
Click to expand...
Click to collapse
If it's .435 firmware you will have multi touch
Sent from my X10a using XDA App
Mr Patchy Patch said:
If it's .435 firmware you will have multi touch
Sent from my X10a using XDA App
Click to expand...
Click to collapse
how i wish
its 2.0.2.A.0.24
Nocturnal310 said:
how i wish
its 2.0.2.A.0.24
Click to expand...
Click to collapse
Why don't you just flash the .435 firmware then? Then no more wishing
Sent from my X10a using XDA App
Nocturnal310 said:
how i wish
its 2.0.2.A.0.24
Click to expand...
Click to collapse
Since you have already rooted, change your SI number to 1237-0334 which is Singapore Generic (unbranded). No operator crap and pure SE firmware.
how do you change your SI?
http://forum.xda-developers.com/showpost.php?p=8975093&postcount=6
prathaban said:
Since you have already rooted, change your SI number to 1237-0334 which is Singapore Generic (unbranded). No operator crap and pure SE firmware.
Click to expand...
Click to collapse
i opened the default.prop
which values do i need to edit can u tell me?
there is no such text as mentioned here: http://forum.xda-developers.com/showpost.php?p=8975093&postcount=6
ro.semc.version.cust=****-****
ro.product.name=X10_****-****
edit: i went to build.prop in system folder and edited the above mentioned values
but its not working.
i also heard changing SI no longer works
I upgraded a few days ago to .435 and had to re-root but it was definitely worth it.
I used Super One Click to root and installed Busybox from market, Titanium Backup and Xrecovery. Worked like a charm.
Ken
so whats new in .435 other than multitouch?
Nocturnal310 said:
so whats new in .435 other than multitouch?
Click to expand...
Click to collapse
Nothing special : ....