Hey there, ...
I was trying to flash hspl to get a costum rom on a friends HD2, but it is somehow not possible. it wont recognize the usb connection after changinging to bootloader (windows does though). Ive got a german vodafone rom on there right now, the one that it was sold with (1.66). Also when I try to put another version, it wont work.
Are there other possible locks i might have forgot about?
thanks
Hanni
SirHanni said:
Hey there, ...
I was trying to flash hspl to get a costum rom on a friends HD2, but it is somehow not possible. it wont recognize the usb connection after changinging to bootloader (windows does though). Ive got a german vodafone rom on there right now, the one that it was sold with (1.66). Also when I try to put another version, it wont work.
Are there other possible locks i might have forgot about?
thanks
Hanni
Click to expand...
Click to collapse
Run the hspl as administrator.
also, when hspl.exe times out, leave the phone in bootloader, and run hspl.exe again (right click, run as administrator)
try all your different usb ports, , leave the phone in bootloader all the time. plug it in, wait 20 seconds for 'serial' to become 'usb' then run hspl.exe
SirHanni said:
Hey there, ...
I was trying to flash hspl to get a costum rom on a friends HD2, but it is somehow not possible. it wont recognize the usb connection after changinging to bootloader (windows does though). Ive got a german vodafone rom on there right now, the one that it was sold with (1.66). Also when I try to put another version, it wont work.
Are there other possible locks i might have forgot about?
thanks
Hanni
Click to expand...
Click to collapse
Try this.....
thank you very much for your help, ...
i'll try it as soon as I get my hands on the phone again
Related
I know it sounds noob´ish and it surely is, but I just cannot flash anything onto my Hermes right now. I´ve already WM6 and SPL1.13 on it. I also tried SPL1.09ds but all I get from the RUU updater is an Error260 when I try to flash a new WM6 version onto it. I also tried unticking USB connections in ActiveSync and manually starting the bootloader on my Hermes100. Can anybody give me a tip how it can be done?
PS.: Just tried the micro SD card flashing method which used to work here but doesn´t anymore! I´m really stuck now
what is your current SPL/IPL version??
to check press and hold the side ok button and the power button, then insert the stylus into the hole in the bottom of the device.
Hamudi2000 said:
I know it sounds noob´ish and it surely is, but I just cannot flash anything onto my Hermes right now. I´ve already WM6 and SPL1.13 on it. I also tried SPL1.09ds but all I get from the RUU updater is an Error260 when I try to flash a new WM6 version onto it. I also tried unticking USB connections in ActiveSync and manually starting the bootloader on my Hermes100. Can anybody give me a tip how it can be done?
PS.: Just tried the micro SD card flashing method which used to work here but doesn´t anymore! I´m really stuck now
Click to expand...
Click to collapse
For me, I have same experience. I have tried 1.09ds and 2.10 (Hard-SLP), it alos not work for flash rom, display error[260] at final.
Do you have admin rights onyour machine? Also if you dont try with Force SSPL option. I get that error form work when I am not logged in as admin.
were are you stuck? if your stuck in bootloader or splash, look here
If you can still boot to OS, try to flash HardSplv7. if this is successfull, try to flash the new wm6, instead of using autodetect, click spl2.10, and check "is it hard spl?".
good luck!
sorry, I am not stuck on my Hermes, it´s all good, but it won´t flash anything and yes, I have admin rights on XP. I´ve got IPL 1.00, SPL 1.13.Oli. I´d really like to update to a newer version of WM6 but I can´t. I even tried with force SSPL and even the HERMimg.nbh flashing method from card didn´t work.
What I can do off course is booting into WM6, but my WM6 version is a quite old one
PS: Troubleshooting info: When I try to flash HardSPLv7, my device is going into Tricolor mode (like it should) showing IPL-SSPL by Des and SPL-1.09.ds and XP hardware assistant is searching for drivers for an unknown USB device and after a while I´ll get the error260 :/
are you up to date on your .net framework? 3.0?
framework 3.0? no, I think I have 2.0, but thanks for the tip. But my problem is now solved I formatted my micro SD to FAT32 and that helped flashing directly from card. After that I tried flashing via USB and now that also works!
I was instaling NBD_v8.3_8MB trough shelltool on my MDA Vario then something happened and my PC restarted I whink it is because of the electicity .... so now when I restardet my phone it is stuck on the T-mobile screen Where it is writen.....
IPL 2.21.001
SPL 2.21.Olip
GSM 02.19.11
OS 6.6.6.666
Thanks in advance
First of all, its not bricked. Bricked = doesn't turn on, nothing, blank screen.
I've looked to your info, you already have HardSPL, so you can flash directly using any RUU, don't use shelltools!
Enter bootloader (hold camera+reset), open up the RUU of the ROM you want (make sure it doesn't have any IPL/SPL) and flash away
well I looked all day what to do and I can not find solution
I just can not understand how to flash the phone
I found one solution via some kind of Wizard_love, but again I do not know what to do
Please help i am haveing the same thing just did it today i have the Cingular 8125....i have held camera+reset and got into these Red,Green,Blue,white screen and it says IPL 2.25 and SPL 2.25 now when i run the ROMUpdateUtility_Wizard_NoID it does not work i have my usb pluged in and my phone says USB please help
Thank you
PS.
I am running Vista
IPL 2.25
SPL 2.25
GSM 02.25.11
OS.6.6.6.666
_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-
Ok i have try everything. I have tried the RUU from the HTC site and even everything else when it is searching for the PDA and crashes idk why. I turn on my phone holding the camera and i get to the Red,Green,Blue,White...Plug the USB in and the phone says USB but not my computer??? so i don't know what i need to do please HELP i just got the phone and read you can do all this stuff
1. Please use a PC with Windows XP
2. Download your original carrier ROM (i.e. Cinglular stock ROM) and flash back to original WM5
3. Install HardSPL or use SSPL
4. Flash to WM6
starkwong said:
1. Please use a PC with Windows XP
2. Download your original carrier ROM (i.e. Cinglular stock ROM) and flash back to original WM5
3. Install HardSPL or use SSPL
4. Flash to WM6
Click to expand...
Click to collapse
Were can i get HardSPL,SSPLand the flash back up?
all i have is the original rom
You guys wanna see bricked? I have a BRICKED! phone... My MDA was the unfortunate victim of a car accident. When my car went carreening off the road, my MDA went flying through the air and ended up on the floor of the car but not before hitting virtually every surface on the inside of the car.
Now my charge port is completely snapped off and my battery shorted out when I was trying to hold the charge port in place to charge it and fried the main board. DEAD. NO MORE.
THAT MY FRIENDS, IS BRICKED....
No worries though, I already ordered a TyTN II
Cool can you help?
Oh and i had the same problem with my mda and i got it replaced from tmobile. - the easiest way to reapair an MDA is getting it replaced ^^
offtopic
@dharvey4651
Why didn't you buckle up your phone?
Well i got mine up and running agian just used XP and install the RUU from HTC YES.......Now when i go to install WM6 when i press update were it should show me the Ver. of the one i am installing on my phone it does not say why please help and what do i need to install WM6 on my phone?
Just a quick question did you read the other threads there are already. They basicly explain everything clear and good
i have just still stuck on some stuff
dferreira said:
First of all, its not bricked. Bricked = doesn't turn on, nothing, blank screen.
I've looked to your info, you already have HardSPL, so you can flash directly using any RUU, don't use shelltools!
Enter bootloader (hold camera+reset), open up the RUU of the ROM you want (make sure it doesn't have any IPL/SPL) and flash away
Click to expand...
Click to collapse
jukata
first of all,as dferreira has assured u that ur device is not bricked,secondly ,you already have HardSPL,that means your device is unlocked,just follow his instructions,download any wm6 Rom and flash,it'll good to go,but if u still want to be sure,download WST Tool from the below given thread read carefully and apply the tool to verify the status of ur device,
http://forum.xda-developers.com/showthread.php?t=329170
u can flash NBD rom which u have or any other wm6 rom,goodluck
NVM i am on the Other Page! Thanks
Ok, i have read everywhere and can't help myself, so if someone would be kind enough to help it would be much appreciated
Ok, Used SoftSPL and tried flashing the ROM. It manages to get to 99% and then just goes RED. I have tried 3 different ROMS and same story it goes RED at 99%.
When i remove the battery, it goes to the RUU Red, Green and Blue screen. SPL version is 2.16.0001. Not Oli's new one.
What do i do from now?
kastro said:
Ok, i have read everywhere and can't help myself, so if someone would be kind enough to help it would be much appreciated
Ok, Used SoftSPL and tried flashing the ROM. It manages to get to 99% and then just goes RED. I have tried 3 different ROMS and same story it goes RED at 99%.
When i remove the battery, it goes to the RUU Red, Green and Blue screen. SPL version is 2.16.0001. Not Oli's new one.
What do i do from now?
Click to expand...
Click to collapse
Soft SPL only allows you ONE update, so phone is CID unlocked only when Soft SPL is loaded.
It's normal for the RUU to stick on 99 % for a couple of minutes, The whole update will take aprox 10 minutes.
You can try the hard SPL from there you are semi-permanently CID unlocked.
Good luck,
EquinoXe
Hey guys today i downloaded the latest shipped rom from htc for advantage not knowing that the spl was 1.10! and mine was 3.50 so now i'm stocked in bootloader screen now knowing what to do and cant flash any rom! i tried some cmds with mtty but not working. tried removing battery but not working and still stocked in bootloader... i know that this can be fixed but dk how. plz help guys and gals.
before upgrading i was usin Sogarth's base rom and now i get spl 3.50 olinex on the screen.
the ruu cannot connect through usb with bootloader... stocked! anxious
you may want to try this
check that spl3.5 is still in your device (it says in bootloader)
If 3.5 is there
disconnect your device
switch off computer
reset device ( it probably boot stray into bootloader)
switch on your computer
connect the device
install appropriate room for your SPL
that worked for my
( I believe that enable rapi is there to allow for usb comms, but when you connect the device bootloadeR will change from serial to USB
As long as spl 3.5 is in the device OK you should be able to recover
p.s. if room install comply follow recovery procedure, (remove battery)
good luck
room = rom?
hirad_sabaghian said:
room = rom?
Click to expand...
Click to collapse
yeah
anyway, yes please tell us what your SPL version is now. I'm sure it is still 3.50.
also, have you tried reflashing the OS? the RUU can most certainly connect to bootloader. just run it in the normal way..as if the Athena was running WM
the only prob was that pc couldnet connect through usb with bootloader tnx PBL1 and tnx cmon... i solved it! i was shocked cause i thought i mixed up the device! tnx anyway
Originally Posted by hirad_sabaghian
room = rom?
Click to expand...
Click to collapse
Lol never trust a spell checker, they are treacherous criters and will get you in the most embarrassing situations at the lest expected moment.
Any way glad you problem is solved, some times the PC mess up the usb connection.
Hi there... I bought my T-Mobile Touch Plus from UK a year ago, and have been trying to follow this forum ever since... but have had trouble understanding most of it, due to my limited understand of hardspls, roms, and all that stuff.
The phone has been very disappointing, as I had a much faster and reliable experience on my Magician.
Been to lazy to do anything about it until now...
My phone is still 100% stock standard from T-Mobile UK and its model is a NIKI200.
Can someone tell me what I need to do to make it a half decent phone?
I have also tried to get the official 6.1 OS update... but have been unable to due to my serial number not being right or something. Will it matter if I try upgrading it anyway with those files?
Thanks
soggybiscuit said:
Hi there... I bought my T-Mobile Touch Plus from UK a year ago, and have been trying to follow this forum ever since... but have had trouble understanding most of it, due to my limited understand of hardspls, roms, and all that stuff.
The phone has been very disappointing, as I had a much faster and reliable experience on my Magician.
Been to lazy to do anything about it until now...
My phone is still 100% stock standard from T-Mobile UK and its model is a NIKI200.
Can someone tell me what I need to do to make it a half decent phone?
I have also tried to get the official 6.1 OS update... but have been unable to due to my serial number not being right or something. Will it matter if I try upgrading it anyway with those files?
Thanks
Click to expand...
Click to collapse
1. download the spl files (flash-uspl-niki.zip & sspl-1.16-nike).
2. REMOVE SIM and SD CARDS !!
3. connect usb cable
4. copy sspl-1.16-nike.exe to your device and run it (usb cable must be connected!)
5. after a few seconds "USB" appears on the display
6. unplug and replug the usb cable
8. you can now flash the USPL by running ROMUpdateUtility.exe from flash-uspl-niki
9. after installing the uspl the phone will reboot
10. after that you can flash the new HTC rom update.
Download the HTC rom update from the following location:
http://www.megaupload.com/?d=MX5GHOXC
http://www.filefactory.com/file/a00...831_3_Radio_NikeMR_1_65_29_22_signed_Ship_exe
http://rapidshare.de/files/41219609..._Radio_NikeMR_1.65.29.22_signed_Ship.exe.html
THANKS!! I will give it a go!
Seems a lot better now thanks!
Does that take the network unlock away as well?
Can I now try flashing most of the NIKI100 or NIKI200 roms onto it?
Purchased the Raphael in Hong Kong, it does not have SIM lock.
It was HARDSPL by myself, done.
Then I flashed other rom - just OS, and the phone worked well. Yesterday, I saw the screen stayed on TRI colors, I made soft reset for couple time, the device is able to load Windows. Thus, I thought the ROM - OS is not good, so I flashed other ROM (OS) bt micro SD card, and it said the job was done and succeed.
But the phone cannot enter Windows anymore, just stayed on the TRICOLORS screen.
What can I do?
Thanks!!
Did you try a hard reset?
did you used the right hardspl?
because there are olso different for wm 6.5
greetz
n3m3s1s said:
did you used the right hardspl?
because there are olso different for wm 6.5
greetz
Click to expand...
Click to collapse
What? HardSPL is HardSPL. It's device specific, not OS specific. As long as his device has been HardSPL'd he's good to go. shgman, when you're at the tricolor screen, connect the phone to your computer. You can't use activesync so don't try. At the bottom of your screen, does it say USB? If so, try to flash again. Sometimes I get incomplete flashes from my SD card.
silentP said:
What? HardSPL is HardSPL. It's device specific, not OS specific. As long as his device has been HardSPL'd he's good to go. shgman, when you're at the tricolor screen, connect the phone to your computer. You can't use activesync so don't try. At the bottom of your screen, does it say USB? If so, try to flash again. Sometimes I get incomplete flashes from my SD card.
Click to expand...
Click to collapse
SlientP, I agree with you. HardSPL is hardSPL, then OS is OS. Yes, the device is able to Laptop while the USB cable is plugged in, the bottom of screen - white area say USB.
I had downloaded official ROM from HTC Hong Kong, and tried to flash the device back to factory default, the package is including Radio, done again. But......... the screen is still stayed at TRICLOLOR screen.
Thanks, shgman
I appreciate somebody who can help me?
I remember having a corrupted ROM install and had to manual enter into the bootloader. From there I was able to flash from my computer just fine... Wanna try that?
Try flashing stock rom then flash custom rom. It the custom rom fails again then its a bad rom or hardspl is not working right.