New Voice Dialer++ (MS Voice Command 1.5 Is out)
1.5 is free to download for users of 1.0 & 1.1
go get it now :twisted:
Here is the link
so that no one will PM me to ask for it
http://www.microsoft.com/windowsmobile/downloads/voicecommand/updateversion.mspx
darren_the said:
Here is the link
so that no one will PM me to ask for it
http://www.microsoft.com/windowsmobile/downloads/voicecommand/updateversion.mspx
Click to expand...
Click to collapse
Weird, just installed the update without having MSVC installed and it works.
iggy said:
darren_the said:
Here is the link
so that no one will PM me to ask for it
http://www.microsoft.com/windowsmobile/downloads/voicecommand/updateversion.mspx
Click to expand...
Click to collapse
Weird, just installed the update without having MSVC installed and it works.
Click to expand...
Click to collapse
I've been trying all day and cant get the darn thing to download I keep getting
Service Unavailable
The server is temporarily unable to service your request. Please try again later.
Any chance of sending me the file ?
Just tried it and it again and it worked. I would be happy to send it if needed, do you have an email that can handle 5.5mb attachments?
Yes please please mail it to [email protected]
Many Many thanks
I tried this on my XDA II with the 2.06 2003SE ROM and found a problem - could someone else let me know if they have the same problem...
After installing I reset my device. After the reset, I found that I couldn't select any of my other input panels other than the default Block/Letter recognisers or the built in keyboard. IntelliPad (Phone Pad) and MessageEase were in the list but when I selected them it just switched to the default keyboard.
Can anyone help?
I've found the same problem with Intellidialler but finally managed to get Calligrapher working and never drew the connection with voice command. On top of that, there was an error the first time I tried the 1.5 upgrade setup and now if I try setting up 1.5 again it states that "No previous version of Microsoft Voice COmmand US PPC 1.50 was not found on this machine. The setup cannot continue" (yes you read the double negative right it's not a typo) I've tried uninstalling 1.0 and 1.5 and reinstalling to no avail. If anyone has an idea about either of these problems please share...
Hey pole_vaulter1,
I had exactly the same problem (No previous version etc).
It can be solved by copying the .cab file in c:\program files\microsoft voice command\ onto your xda\imate\mda and running the cab file from there.
Hope this helps.
Craig.
Craig,
Thanks a bunch - worked perfectly. I really should have thought of that myself but I suppose that's what a forum is for. Now if I could only get my Tengo and Intellipad to show up instead of the keyboard it would be perfect (until the next upgrade,tweak, software, etc.)
THANKS,
Travis
Craig,
in my case the installer does not create the \program files\microsoft voice command\ directory. Can I extract the cab file from the msi?
G'day Eddy,
I'm assuming you have 1.0 or 1.1 installed on your ppc.
Do you install files to another location? The file that went into the directory I mentioned is ... "Microsoft Voice Command.PPC420_StrongARM.CAB". You might be able to search your pc for that file?
As for extracting the cab from the msi - no idea sorry
Hope you find it.
Craig.
Craig,
no, I did not have version 1.0 nor 1.1. I got the impression that you installed without a previous version.
G'day Eddy,
No, I had the exact same problem as Travis a couple of posts up where I installed the upgrade, it gave me an error at the end of the setup on my ppc saying I already had voice command already installed (even though you had to have it installed for the upgrade to work) so I uninstalled it on my ppc - soft booted it to make sure it wasn't still resident, tried to re-install it and it gave another error saying that I didn't have the necessary software installed (version 1).
I'm not sure if you can buy version 1 of the software anywhere anymore but from other posts, apparantly handango will only let you buy it if you are a US or Canada resident.
Sorry for the bad news for you.
Craig.
Cab file MSVC 1.50
I found the cab file. Just copy it to you're device. :lol:
Dutchie,
could you mail this cab file to me or did you extract from the msi file?
@Dutchie - do you have any problems with any of your SIP's?
The second I install it from the CAB file I'm unable to select either IntelliPad or MessageEase for my input methods.
If yours is working then I'm wondering what I've done wrong!
No Wifi or Wordlogic after MSVC :-(
SH..... no WIFI or Wordlogic after I installed 1.5. I uninstalled it, and they work again. Anyone having the same problem with Voice command??? :?:
Does 1.0 the same??
I had quite a few problems after installing Voice Command 1.5. MS Reader would not run (out of memory error) and Calligrapher would not work either (still apeared in the bottom right) but only keyboard would load when Calligrapher chosen.
If I disabled Voice Command 1.5 (as opposed to removing it) everything was fin again.
From another forum I found that the problems I was experienceing was related to plugins in the Today screen (I had the Sprite monitor programming running). When this was removed, Calligrapher kicked back into life and Voice Command 1.5 worked fine.
MS Reader still gave the same out of memory error, but I found that if I added a shortcut in the Startup directory for MS Reader and made sure it loaded first then it would work fine after that.
Hope this helps
Mike
NinjaDonkey said:
@Dutchie - do you have any problems with any of your SIP's?
The second I install it from the CAB file I'm unable to select either IntelliPad or MessageEase for my input methods.
If yours is working then I'm wondering what I've done wrong!
Click to expand...
Click to collapse
NinjaDonkey said:
...do you have any problems with any of your SIP's?
The second I install it from the CAB file I'm unable to select either IntelliPad or MessageEase for my input methods.
If yours is working then I'm wondering what I've done wrong!
Click to expand...
Click to collapse
Interestingly, I have a similar problem, but I haven't touched MS Voice Command. I've had to make Intellipad my default input method, even though I use Fitaly more often. Once I change from Intellipad to anything else, I can't go back to Intellipad, or anything else, for that matter...
If I try to run a 3rd Person Application on my WM6 phone, I get the follow error:
"The file '[app]' cannot be opened. Either it is not signed with a trusted certificate, or one of its componenets cannot be found. If the problem persists, try reinstalling or restoring the file."
I'm entriely sure what the problem is. Any ideas?
Nanaki06 said:
If I try to run a 3rd Person Application on my WM6 phone, I get the follow error:
"The file '[app]' cannot be opened. Either it is not signed with a trusted certificate, or one of its componenets cannot be found. If the problem persists, try reinstalling or restoring the file."
I'm entriely sure what the problem is. Any ideas?
Click to expand...
Click to collapse
HAve you changed page pool through activesync? If you did, you picked the wrong tool for your rom.
cheers
Hi,
I've got an issue trying to use some software on my Rose.
Using GW PDA Connect, its installs and synchronises ok the first time (provided I install the software unlocker available from orange developers). Subsequent attempts to run it asks me to reinstall the software. If I attempt to reinstall the application which resides on the smartphone I get the following error:
cesetup.dll
\\Windows\230\XCPCSyncSvr.exe: Error 2
A bit of googling and it basically boils down to the fact this is a Tier-3 security level problem. In order to change the security level I was going to try a registry hack but can't use any registry editor as its not digitally signed for the device.
Any help much appreciated - thanks in advance.
Hi
I have exactly the same problème between my HTC Touch HD (WM6) and GroupWise PDA Connect.
IBM post a solution, but for Lotus Notes :
http://www-01.ibm.com/support/docvi...475&loc=en_US&cs=UTF-8&lang=en&rss=ct465lotus
I don't how to adapt this to Groupwise.
I still search ...
I find a ... solution.
Each time you want to sync with PDA Connect, delete or rename the rep \Windows\230.
It's not a clean solution, but I find anything else.
sweet!
thanks fella, will give it a try.
zoomee said:
Hi,
I've got an issue trying to use some software on my Rose.
Using GW PDA Connect, its installs and synchronises ok the first time (provided I install the software unlocker available from orange developers). Subsequent attempts to run it asks me to reinstall the software. If I attempt to reinstall the application which resides on the smartphone I get the following error:
cesetup.dll
\\Windows\230\XCPCSyncSvr.exe: Error 2
A bit of googling and it basically boils down to the fact this is a Tier-3 security level problem. In order to change the security level I was going to try a registry hack but can't use any registry editor as its not digitally signed for the device.
Any help much appreciated - thanks in advance.
Click to expand...
Click to collapse
Have you tried this: http://forum.xda-developers.com/showthread.php?t=496425
I am unable to open the new updates. 20090811 or 20090906. I keep getting the error
"Microsoft Visual C++ Runtime errror" "The Application has requested the runtime to terminate in an unusual way"
I don't know what to do about this. the older versions work fine. I reflashed with the 20010801 just to see and it flashed fine.
This is the same computer I always flash from. Like I said i can flash the older roms. Nothing has changed on the computer. I have installed no new software or hardware. I ran a Microsoft update after this problem came up to try and resolve it... no difference.
I cannot get a response in the energy rom thread, probably because it's 600 pages long. I have searched and found nothing.
Any Ideas?
flash it using SD card
I just ran into the same problem... Unzip it again, make sure there is only 2 files in the folder, then rename the folder.. The folder name is too long so it wouldn't work.. Just flashed successfully Thanks NRG!!!!
tweakedlogic said:
I am unable to open the new updates. 20090811 or 20090906. I keep getting the error
"Microsoft Visual C++ Runtime errror" "The Application has requested the runtime to terminate in an unusual way"
I don't know what to do about this. the older versions work fine. I reflashed with the 20010801 just to see and it flashed fine.
This is the same computer I always flash from. Like I said i can flash the older roms. Nothing has changed on the computer. I have installed no new software or hardware. I ran a Microsoft update after this problem came up to try and resolve it... no difference.
I cannot get a response in the energy rom thread, probably because it's 600 pages long. I have searched and found nothing.
Any Ideas?
Click to expand...
Click to collapse
reinstall Microsoft Visual C++
http://www.microsoft.com/downloads/...ee-a3f9-4c13-9c99-220b62a191ee&displaylang=en
TNPaparazzi said:
I just ran into the same problem... Unzip it again, make sure there is only 2 files in the folder, then rename the folder.. The folder name is too long so it wouldn't work.. Just flashed successfully Thanks NRG!!!!
Click to expand...
Click to collapse
i got the same error, but renaming the folder and putting it on C: worked for me too
Do you guys ever search for solutions???
Guys,
A simple search in the NRG latest ROM thread would give you the solution in seconds.
Rename the folder so there are NO spaces in it (i.e. "EnergyROM_RAPHAEL_20090905_Standard") and just to be on the safe side, use a "Custom_RUU" from an older build.
Happy flashing!
Had the same problem, renaming the folder resolved it.
i just redownloaded it....and it worked
Hello,
I've uploaded my first apk to Google Play, made with processing 2.03.
I used this guide to sign: http://www.akeric.com/blog/?p=1352
After a few hours, when the app was visible, when trying to install, I get the "package was not signed correctly".
I'v tried it on another device rather than the one used for testing and I have the same issue.
1. is there a way to test apk's faster? It could take up to 12-24 hours for the new apk to be updated on Google Play, and that's what I have to wait to see if I now signed my apk correctly.
2. can you download the app and see if you get that issue?
3. does it matter what information you input when you create the release key using jdk? I mean, does google check against information you use in your Google Play publisher's account and then gives that error?
4. is there an alternate way of signing my apk? obviously this manual method is no good for a noob.
I am using win 7 64 bit, latest jdk7 at the time of writing, latest android sdk with just api level 10 installed, latest version of apache ant (installed manually).
here's the fix
To anyone having this issue, STOP USING JDK 7 and install JDK 6.
Not only JDK7 outputs some warnings when you sign your apk that "the internets" say they're safe and should work anyway, but they will generate badly signed apks that malfunction when you try to install off google play saying the "package was not signed correctly".