I am unable to open the new updates. 20090811 or 20090906. I keep getting the error
"Microsoft Visual C++ Runtime errror" "The Application has requested the runtime to terminate in an unusual way"
I don't know what to do about this. the older versions work fine. I reflashed with the 20010801 just to see and it flashed fine.
This is the same computer I always flash from. Like I said i can flash the older roms. Nothing has changed on the computer. I have installed no new software or hardware. I ran a Microsoft update after this problem came up to try and resolve it... no difference.
I cannot get a response in the energy rom thread, probably because it's 600 pages long. I have searched and found nothing.
Any Ideas?
flash it using SD card
I just ran into the same problem... Unzip it again, make sure there is only 2 files in the folder, then rename the folder.. The folder name is too long so it wouldn't work.. Just flashed successfully Thanks NRG!!!!
tweakedlogic said:
I am unable to open the new updates. 20090811 or 20090906. I keep getting the error
"Microsoft Visual C++ Runtime errror" "The Application has requested the runtime to terminate in an unusual way"
I don't know what to do about this. the older versions work fine. I reflashed with the 20010801 just to see and it flashed fine.
This is the same computer I always flash from. Like I said i can flash the older roms. Nothing has changed on the computer. I have installed no new software or hardware. I ran a Microsoft update after this problem came up to try and resolve it... no difference.
I cannot get a response in the energy rom thread, probably because it's 600 pages long. I have searched and found nothing.
Any Ideas?
Click to expand...
Click to collapse
reinstall Microsoft Visual C++
http://www.microsoft.com/downloads/...ee-a3f9-4c13-9c99-220b62a191ee&displaylang=en
TNPaparazzi said:
I just ran into the same problem... Unzip it again, make sure there is only 2 files in the folder, then rename the folder.. The folder name is too long so it wouldn't work.. Just flashed successfully Thanks NRG!!!!
Click to expand...
Click to collapse
i got the same error, but renaming the folder and putting it on C: worked for me too
Do you guys ever search for solutions???
Guys,
A simple search in the NRG latest ROM thread would give you the solution in seconds.
Rename the folder so there are NO spaces in it (i.e. "EnergyROM_RAPHAEL_20090905_Standard") and just to be on the safe side, use a "Custom_RUU" from an older build.
Happy flashing!
Had the same problem, renaming the folder resolved it.
i just redownloaded it....and it worked
Related
The file "xx" cannot be opened. Either it is not signed with a trusted certificate...
I keep getting this error whenever I try to open a couple applications, like Navizon, HTC Home Customizer, MS Live Search, and a lot more (but googlemaps and a few work just fine). Anyways I flashed to a DCD 3.0.1 rom I cooked... I added a few apps from the titan kitchen by copying the OEM folders into the DCD OEM folder and it all went pretty fine....
has anyone ever encountered these errors? I think I'm gonna have to cook a clean rom with just the basics and have to install everything one by one again unless someone knows what to do..
I had the exact same problem.
you didn't include the .NET framework in your build.
re-cook with that option selected, and those apps will work.
nickles96 said:
I had the exact same problem.
you didn't include the .NET framework in your build.
re-cook with that option selected, and those apps will work.
Click to expand...
Click to collapse
im using dcd 3.0.1 kitchen, i dont even see it listed as an option and i thought it was already built in anyway
Did this ever get resolved? I am having the same issue with Garmin and I know I have .net installed
if you are installing to a memory card, try installing to main memory... that worked for me with MusicID
Bump having this issue helpplease
trying to install or try some different Radio cabs I keep getting this error few other programs as well fairly new so I am pretty confused. oh this is is on My Kaiser Tilt though was hoping not to have to start a whole new thread.
getting the same error message
i keep getting the following error message
"The file 'xx' cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. If the problem persists, try reinstalling or restoring this file."
every time i do a soft reset all my installed programs get like this, and i have to reinstall them for them to work. This only happens to the applications i've installed on my own, not the ones that come with the phone.
if there is anyone out there who has a solution, please let me know.
File Explorer error on MDA Vario 2
Hello ppl
i uninstalled a game & a worldmate live program from my windows mobile in the morning.. from the very next moment i'm unable to browse through my file explorer
i click
start>file explorer
i get the following error
"The file 'Start' cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. If the problem persists, try reinstalling or restoring this file"
help pls..... on this issue..
regards
Prasad
SOLUTION!!!
Most of the cases this is not a CERTIFICATE problem-
if you go to your file explorer and look for the PROGRAM FILES directory you will be surprise -
actually this happens when you install cabs on the storage card - those apps write temp files all the time - so when you take out your SD card - those apps continue writing this temp files -
in the bottom line = go to your device and rename the FOLDER storage card to storage old -
now you will see the icon for your SD CARD next to the name STORAGE CARD 2-
the last thing is to remove the SD CARD an re insert it again - now you will see that it return to its original name (STORAGE CARD) .
enjoy
Thank you mate, same problem here solved with your help
uZardWebP
I m not able to rename the storage card to storage old pls help and i m getting the same error message with uzard web browser.
http://www.yourmobileblog.com/2010/09/working-solution-for-errors-like-file-cannot-be-opened/
I got the solution here, check out yourself
Well, up until now, I have just used DCD's ROM's without customizing then, but I thought I would give the kitchen a shot. So, I downloaded DCD's latest and greatest kitchen of v3.2.2, also downloaded the .Net 2.0 link EXE fil from his page and tried to install it (cause you need it to run the kitchen) but I get an error, says that it is "incompatible with the previously installed version of .net"
so, i tried uninstalling all my .net stuff in add/remove, rebooting, and installing this, and still wont let me. i tried windows update and updated to 3.5, had 1.1 and 2.0 downloads as well, and nothing will work.....net will not install at all, no matter what version.
so i cannot get the kitchen to run...help....?
:: Connor
did you restart the computer? after, did you delete the entire extracted folder of the kitchen and re-extract it? that always works for me.
Using DCD's (BuildOS) Kitchen with Vista
If you have UAC active on Vista here is what I suggest. If you are seeing issues with default.hv, user.hv, boot.hv most likely you have a permissions issue. Delete your extracted directories - Create a Root folder, such as Kitchen - Select Properties of that folder in Explorer - Go to the Security Tab and choose Edit - highlight your Users group and choose full control and then OK. Extract your kitchen files into this location. Logic would tell you that you should be able to just change the permissions on your folder once you extract it - UAC and logic don't necessarilly run together.... So once you've created a Root directory, set the security, extracted the kitchen into this location - run buildNB.bat as you would anything else - good luck.
The same issue applies to Vista and .Net errors (.Net 2.0 is default in Vista)
lol @ Vista...who uses Vista? hehe.
crobs808 said:
lol @ Vista...who uses Vista? hehe.
Click to expand...
Click to collapse
Was that really necessary? You are asking for help, and decide to bash controversial/fairly useful software in the same thread. Use your brain, kiddo!
I use Vista. Works great. I also have an XP desktop.
Heck I still have a notebook running windows 95 on it.
Whats it to you?
Was that really necessary? You are asking for help, and decide to bash controversial/fairly useful software in the same thread. Use your brain, kiddo!
Click to expand...
Click to collapse
Yeah this is the same kid who claims he is the only one that has nevo remote working, even though it doesn't work on EVERY other Titan. He's also the one that says he can magically send MMS messages without any software to do so. I'm starting to smell the bs from all the way here in Boston.
crobs808 said:
Well, up until now, I have just used DCD's ROM's without customizing then, but I thought I would give the kitchen a shot. So, I downloaded DCD's latest and greatest kitchen of v3.2.2, also downloaded the .Net 2.0 link EXE fil from his page and tried to install it (cause you need it to run the kitchen) but I get an error, says that it is "incompatible with the previously installed version of .net"
so, i tried uninstalling all my .net stuff in add/remove, rebooting, and installing this, and still wont let me. i tried windows update and updated to 3.5, had 1.1 and 2.0 downloads as well, and nothing will work.....net will not install at all, no matter what version.
so i cannot get the kitchen to run...help....?
:: Connor
Click to expand...
Click to collapse
tried getting a new computer?
coffey_joshua said:
tried getting a new computer?
Click to expand...
Click to collapse
If you read his blog, he actually sells (overpriced) computers. Once again, I think gc has properly diagnosed what's going on.
I have a similar problem with 3.2.0 but my screen is stuck on the vzw screen stuck ...is there anything I can do to fix this ?
thanks
gc14 said:
I'm starting to smell the bs from all the way here in Boston.
Click to expand...
Click to collapse
Whoa and that's saying a lot, given the way that bean town must smell; I mean they call it bean town for a reason, right ?!
Yeah...though I think they should rename it Sports-town for the way that our sports teams beat everyone else's asses all the time....
gc14 said:
Yeah...though I think they should rename it Sports-town for the way that our sports teams beat everyone else's asses all the time....
Click to expand...
Click to collapse
... and he knocked that one right over the center-field wall
gc14 said:
Yeah...though I think they should rename it Sports-town for the way that our sports teams beat everyone else's asses all the time....
Click to expand...
Click to collapse
Now who's shoveling the bs.....
OH - wait, they kinda did spank my Lakers..... guess I'll go back to the corner now.....
No it is ok as Bean-town, only used as a verb. Still has the sports connotation, and can be used both offensively and defensively, and in all the sports Boston offers (Hockey, BB, Baseball, Football, etc).
Verb
To bean.
1. To hit with a projectile, accurately.
The pitcher beaned the batter, rather than letting him hit another home run.
I have tried to run DCD's latest kitchen on multiple computers and every time I run BuildNB, it crashes when it tries to start BuildOS.
I have tried it on WinXp Sp2, WinXp Sp3, a bare install of Winxp SP2. I have tried it on all versions of Dot Net....
Still no love for me!!! :-(
WTF am I doing wrong???
EDIT:
Ok the issue was a path problem, apparently there was an issue where if I tried to run it from My Documents folder or the Desktop folder that the path was too long.
I moved the kitchen folder to the root of C:\ and it ran perfectly.
Hope this helps others that have the same issue!
Thanks everyone for your help in figuring out the issue.
2K3GTP said:
I have tried to run DCD's latest kitchen on multiple computers and every time I run BuildNB, it crashes when it tries to start BuildOS.
I have tried it on WinXp Sp2, WinXp Sp3, a bare install of Winxp SP2. I have tried it on all versions of Dot Net....
Still no love for me!!! :-(
WTF am I doing wrong???
Click to expand...
Click to collapse
Have you installed Visual C++ 2008 Runtime?
http://www.microsoft.com/downloads/...34-3e03-4391-8a4d-074b9f2bc1bf&displaylang=en
It is required along with .net version greater than 2.0
Yes, I have installed it even though it is no longer required for DCD's latest kitchens, but BuildOS still crashes...
Sorry, that's all I've got. Hopefully someone else can chime in.
2K3GTP said:
Yes, I have installed it even though it is no longer required for DCD's latest kitchens, but BuildOS still crashes...
Click to expand...
Click to collapse
Is it crashing immediately.....have you run it before?
It worked when I cooked a DCD ROM a few months ago, now with the new kitchen it starts to move the modules then BuildNB calls BuildOS and it crashes immediately. I can click on BuildOS.exe and get the same result.
You're extracting the folder from the rar file and not just running BuildNB.bat from the archive correct?
Yes, that is correct. I am also an admin on these PC's and I am running it of a network drive but if I copy it locally it also fails so that is not an issue.
This is making me nuts.
2K3GTP said:
It worked when I cooked a DCD ROM a few months ago, now with the new kitchen it starts to move the modules then BuildNB calls BuildOS and it crashes immediately. I can click on BuildOS.exe and get the same result.
Click to expand...
Click to collapse
Have you downloaded it again? Sounds like a corrupted download......
This is what the debugger says:
An unhandled exception of type 'System.IO.DirectoryNotFoundException' occurred in mscorlib.dll
Additional information: Could not find a part of the path 'C:\Documents and Settings\user\Desktop\dcd_titan_kitchen_3.2.6\dcd_titan_kitchen_3.2.6\TOOLS\SYS
Did you re-download the kitchen again??
path too long?
try to extract the archive to a folder on the root of C:, like "DCD326" and run it from there. there may be a limit to the length the path to a file can be. good luck...
I've searched this and other forums for solutions (.cab and regedits), but none of them worked for me.
I'm trying to get PC Anywhere 12.5 mobile to run on a custom ROM on my VZW HTC Touch Pro. It works perfectly on the stock ROM, the "pre-release" linked in the stock section, Scott's "6.5 beta" post -- but I can't get the darn thing to properly work on any of Scott's 6.1 custom ROMs. It will install w/o errors just fine on the latter, but as soon as I reboot and try to run the program I get the dreaded "application cannot be found or not signed with a trusted certificate error."
Any help would be greatly appreciated.
Landlocked
I have the same problem with HTC Touch HD...
I´m having the same problem. I try everything that you can think.
My phone is a HTC Touch HD.
The strange thing is that my wife has an Sansumg Omnia with windows mobile 6.1, and I install PCAnywhere and works fine.
If you find a solution, please tell to everybody, i will do the same.
Thank you.
I'm also having an issue with pcAnywhere on my HTC Touch Pro.
It installs fine. However, when I go to connect to a host it sits there with a warning "Warning: Reducing encryption level." -- and it hangs. On the Host I can see the phone trying to connect, but it never makes it. I've tried changing the encryption level to none, tried adding encryption, made sure the phone (remote) and host match.. and nothing. It'll never connect.
The same version of pcAnywhere mobile (3.0.0 Build 123) works fine on my HP iPAQ and HTC Apache without any issues. I've also tried a newer build (from the pcAnywhere 12.5 CD) and I've come away with the same results.
If anyone has any ideas....
Any updates?
Same problem on my htc touch pro
Beefheart36 said:
Same problem on my htc touch pro
Click to expand...
Click to collapse
That sucks, as this is one of the programs that I actually did use. Hopefully someone will figure it out. I'd be willing to donate some $ to the cause.
can you upload the cab so i can take a look at the files and see if i can find an issue...if you want pm me so you dont have to post in the open public...
Any news on these invalid cert. messages? I am having the same issue. Is there a way to turn off certificate on programs??? Wouldn't that be much simpler?
Please follow this link:
The problem is 100% solved with Security Configuration Manager
http://forum.xda-developers.com/showthread.php?t=404170
I had the same problem. At least for me, the fix was to delete all the files that were MFC80xxx.dll. Then I could reinstall this.
I posted this fix a long time ago, but for anyone that may need it again, the way to get this program to work (at least for me):
After install - reboot the device.
Then, look for all the MFC80xxx.DLL files
Rename them to MFC80xxx.dll - it is important that these are all lowercase (the .dll extension).
It should work indefinitely after that fix.
For whatever reason, when pcAnywhere installs, after initial use or after reboot all the MFC80xxx.dll files have a capital .DLL extension. This will make it so that they cannot be read correctly for any application (including my backup applications). But changing it to smaller case .dll works. If you are concerned, reboot and check if it is still in lower case. It should be, but if not, just rename it again - it should stay for good.
Good luck for all that use this program.
So I am trying to get Album 3 to work with my ROM. I have tried many different packages with the same results. The menu text is way too small and now the screen just turns red. I have checked everything I could think of, was actually working on it for a good part of the day and I am so stuck. If I install it via cab it works fine.
Any ideas...anyone?
Can catch me on AIM, Yahoo or MSN. Use the same screen name as here and/or add live.com or yahoo.com
Thanks!
At0mAng, been a while since I made Legacypackages, but can you give this one a try? If you are having problems you may need the Album package to be introduced to the ROM at the end of the process. I forget with Legacy, but does OEM run last? might need to make it an OEM instead of Package with option(which I am attatching). Good luck
jmckeejr said:
At0mAng, been a while since I made Legacypackages, but can you give this one a try? If you are having problems you may need the Album package to be introduced to the ROM at the end of the process. I forget with Legacy, but does OEM run last? might need to make it an OEM instead of Package with option(which I am attatching). Good luck
Click to expand...
Click to collapse
Thanks I will try. I am thinking it might be one of the OEM packages in my OEM folder causing a problem somewhere. Since I have been not cooking for awhile I am not sure what packages I can safely remove from OEM folder since TF3D2 and some other stuff have different dependecies. Tried a few things but nothing works. Does Album 3.X work on 6.1? I am running 21051.
At0mAng said:
Thanks I will try. I am thinking it might be one of the OEM packages in my OEM folder causing a problem somewhere. Since I have been not cooking for awhile I am not sure what packages I can safely remove from OEM folder since TF3D2 and some other stuff have different dependecies. Tried a few things but nothing works. Does Album 3.X work on 6.1? I am running 21051.
Click to expand...
Click to collapse
I believe it does. I seem to recall having it working on a 6.1 ROM. But I think I had that font issue when I didn't have Media Toolkit (photopicker) included. Or maybe you just have an incompatible version? (or maybe I don't know what I'm talking about)
Captain_Throwback said:
I believe it does. I seem to recall having it working on a 6.1 ROM. But I think I had that font issue when I didn't have Media Toolkit (photopicker) included. Or maybe you just have an incompatible version? (or maybe I don't know what I'm talking about)
Click to expand...
Click to collapse
I gave up on Album 3. I thought photopicker had to be included. I tried many versions...
If it installs from CAB, it works well so everything that it needs is in ROM. The packages I tried must be missing a file. I thought it was the mui file, tried a few but with no luck. If you are anyone has the mui that works properly with it please post it
The only file that was missing was the mui so I am guessing it is that or a combo of things...
Try mine my friend, i found these ones with 0409 mui files, these ones always worked fine on my kitchens.
Cheers.
ark666 said:
Try mine my friend, i found these ones with 0409 mui files, these ones always worked fine on my kitchens.
Cheers.
Click to expand...
Click to collapse
Thank you very much! Will give them a shot and see what happens.
I am rebuilding my kitchen from scratch to try to find what the issue is
I believe that the issue is to do with an xml file in the album package, ha_skin_*.xml these need replacing or deleting. I cant remember which now. Do a search and this should bring this answer up