after a couple failed odin flashes
my PHONE is STUCK in DOWNLOAD MODE and i can't use ODIN because my PC now says USB NOT RECOGNIZED
ive uninstalled/reinstalled driver
different ports..different usb cables..different pc and still no luck..and yes ive searched xda..and i have yet to find anyone with similar issues..any ideas?
i finally got my phone to work
IT SEEMS LIKE WINDOWS DOESNT BOTHER TO TRY TO INSTALL THE DRIVERS SO YOU HAVE TO DO IT MANUALLY THROUGH DEVICE MANAGER
1) download http://www.multiupload.com/NMPX3KMWRS
this has the 64 & 32 bit driver folders..put which ever one u use on ur desktop
2) open device manager..plug your phone..if your pc says usb not recognized and unknown device shows in device manager..right click..properties..then uninstall it..
3) unplug ur phone..plug it back in then unknow device should show up in device manager..go to its properties then click update driver..the select own drivers..then browse to the 64 or 32 bit folder and click ok then next..it will try to install but you might get a error..
hopefully it will say install gadget serial and fail..that means ur pc kinda recognizes it
then all u ahve to do is from there is go to device manager..go to the properties of gadget serial..update driver..and browse to the driver folder..and it should install..then u have to do it a couple of more times for when it recognizes other samsung devices such as the adb and composite
Instructions here
http://forum.xda-developers.com/showthread.php?t=803492
First, download http://www.multiupload.com/NMPX3KMWRS
This contains Odin, the Samsung Drivers, stock odin rom, updated odin rom, pit file.
If you don't want to lose your settings, etc. you can skip to the second part. If your phone still doesn't work than start from the top.
-PART 1-
Step 1.) Make sure you have the appropriate drivers installed for your phone. If you are on 64bit then choose 64, if you are on 32 choose 32. You may already have the drivers installed and it will tell you after you try to install them.
Step 2.) Power your phone off
Step 3.) Open Odin.exe and plug a usb cable to your computer that will connect to your phone (do not plug it in to the phone yet, just the computer)
Step 4.) Hold down both volume buttons at the same time and while holding them down plug the usb into your phone. You should see a COM message show up in Odin.
Step 5.) To ensure your phone is back to stock, in odin you will want to check the repartition button. ONLY CHECK IT WHEN YOU ARE FLASHING BACK TO STOCK. Leave the other check boxes the way they are.
Step 6.) Click the PIT button and select the 512.pit file
Step 7.) Click the PDA button and select Original.tar and then click Start
It should go through a bunch of steps and then your phone will reboot. Below are the steps to update it to the latest release.
Close Odin and power your phone off.
-PART 2-
Step 1.) Open Odin.exe and plug a usb cable to your computer that will connect to your phone (do not plug it in to the phone yet, just the computer)
Step 2.) Hold down both volume buttons at the same time and while holding them down plug the usb into your phone. You should see a COM message show up in Odin.
Step 3.) Leave all check boxes the way they are. Do NOT check the repartition box.
Step 4.) Click the PIT button and select the 512.pit file
Step 5.) Click the PDA button and select T959UVJI6.tar and then click Start
Hope this helps!!!
thanks for the idea..but i know how to do all that...
MY PROBLEM
my PC doesnt recognize my phone and its in download mode so i cant use odin
He gave u the link to the drivers your computer doesn't recognize your phone because the drivers uninstalled themselfs it happed to me also just do it see if it helps k
SmartBrother90 said:
thanks for the idea..but i know how to do all that...
MY PROBLEM
my PC doesnt recognize my phone and its in download mode so i cant use odin
Click to expand...
Click to collapse
Sent from my SGH-T959 using XDA App
Thegreat520 said:
He gave u the link to the drivers your computer doesn't recognize your phone because the drivers uninstalled themselfs it happed to me also just do it see if it helps k
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
if you look in my first post i said
"ive uninstalled/reinstalled drivers"
and if i said i tried it on other pcs that would me i would have to install drivers there too..so the driver idea has already been tried..thanks anyway
Hey, I know u said Odin wont recognize your phone, but does your computer recognize that the device or an unknown device has been attached when u plug your phone into the USB. What version of windows are you using.
Jonathan Rubcic
Electrical Engineer
Sent from my SGH-T959 using XDA App
Sorry, u said your computer recognizes that an unknown device is plugged in. Let me see what I can find. If you can get Into download mode, your phone can be fixed!
Jonathan Rubcic
Electrical Engineer
Sent from my SGH-T959 using XDA App
jarubcic said:
Sorry, u said your computer recognizes that an unknown device is plugged in. Let me see what I can find. If you can get Into download mode, your phone can be fixed!
Jonathan Rubcic
Electrical Engineer
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
my phone is in the download mode..matter of fact..its the only mode i can get into..but i cant do anything because my pc wont recognize it
I know this seems simple.... But unplug phone, shut down ODIN, re-open ODIN, plug phone back in.
SmartBrother90 said:
after a couple failed odin flashes
my PHONE is STUCK in DOWNLOAD MODE and i can't use ODIN because my PC now says USB NOT RECOGNIZED
ive uninstalled/reinstalled driver
different ports..different usb cables..different pc and still no luck..and yes ive searched xda..and i have yet to find anyone with similar issues..any ideas?
Click to expand...
Click to collapse
same problem here
All~G1 said:
I know this seems simple.... But unplug phone, shut down ODIN, re-open ODIN, plug phone back in.
Click to expand...
Click to collapse
tried that and still nothing
All~G1 said:
I know this seems simple.... But unplug phone, shut down ODIN, re-open ODIN, plug phone back in.
Click to expand...
Click to collapse
yea that doesnt work & it wouldn't. because the pc has to recognize the phone before odin can..an that the issue! thanks tho
I've also got this probem. Did you by any chance install the voodoo thing? Apparently it messes up your phone if you flash over it.
I think I might buy one with a broken screen for 200ish...............but I really hope I dont have to.
Anyone have a fix for this yet?
@xaymaca i finally got mines to work after 48 hours but it seems like it depends on luck
1) download http://www.multiupload.com/NMPX3KMWRS
this has the 64 & 32 bit driver folders..put which ever one u use on ur desktop
2) open device manager..plug your phone..if your pc says usb not recognized and unknown device shows in device manager..right click..properties..then uninstall it..
3) unplug ur phone..plug it back in then unknow device should show up in device manager..go to its properties then click update driver..the select own drivers..then browse to the 64 or 32 bit folder and click ok then next..it will try to install but you might get a error..
hopefully it will say install gadget serial and fail..that means ur pc kinda recognizes it
then all u ahve to do is from there is go to device manager..go to the properties of gadget serial..update driver..and browse to the driver folder..and it should install..then u have to do it a couple of more times for when it recognizes other samsung parts.
it seems like windows doesnt want to install the drivers itself
um, you just tried alot with those drivers and it eventually worked out differently?
RPGbig said:
um, you just tried alot with those drivers and it eventually worked out differently?
Click to expand...
Click to collapse
no basically first i uninstalled the "unknown device" through device manager
then i would plug the phone..go to device manager and update the drive manually..until gadget serial showed up..if not..i repeat the process..
then when gadget serial shows up..update its driver manually..then samsung adb should show up in device manager..it takes alot of time and patience
If your system still fails to recognize your phone. Try installing Mini Kies. Do a quick search there are plenty of download links for that software. Make sure you restart your system after uninstalling the device.
I had similar issues with myn. But eventually got over with by doing a clean install off the drivers.. Hope this helps.
so i did that and it recognized my phone. it says it on the computer and on odin it changed from 0:[COM4] to 1:[COM3]. but it still stays stuck on set PIT file DO NOT TURN OFF TARGET.
Jessejess87 said:
so i did that and it recognized my phone. it says it on the computer and on odin it changed from 0:[COM4] to 1:[COM3]. but it still stays stuck on set PIT file DO NOT TURN OFF TARGET.
Click to expand...
Click to collapse
what tar and pit files are you using, i had similar issues when i tried odin'ing back to ji6. however odin'ing to stock JFD worked beautifully. if you need help finding the proper odin files here is a mirror of them: Odin Mirrors
This happened to me before, and someone mentioned it earlier. Get into device manager on windows, go to the Universal Serial Bus (USB) section, and I uninstalled every option you see in there. Restart your computer and windows will automatically reinstall those items apon reboot. The phone should now be detectable...
EDIT: Fail, it appears you already got it solved...
hey im not sure what tar abd pit files are. im really new to this. question, with the mirror how would i use it? will it still work with my phone trippin lol and not being picked up on my computer.
Related
i picked it up used with stock rom, no mods. i rooted, then installed nero v3 with voodoo and then v5 with voodoo.... then i tried a custom battery mod and it screwed my phone up... cant get past the vibrant start screen, cant read the ext sd and the phone drivers will not work... computer detects it, but no drivers are installed. i have used the 32 bit driver 64 bit drivers, kies, kies mini, odin v1 and v1.7, still nothing... i can get into cwm recovery, but only with voodoo enabled, and can get into download mode, but i cant seem to get the computer to read it. have used 4 different computer, win 7 and 32 bit xp....also have tried drivers with pdanet and easy tether, but still no luck... can you offer any help to me??? thanks in advance.
as of u have done so much and nothing helped i would cry , and for not readin on how to unbrick your phone right on top of the forum you should cry too .
and if look good enough every 3rd thread that is made is how to unbrick the phone
@bartek
OK...OMG dude... you had like 5 posts 3 days ago...how are you helping this individual out other then giving him all your illegible ramblings that you are posting and ridiculing individuals as you go .. I'm sry, I don't mean to rant but damn...
Anyway OP, your just soft bricked. If you can get into d/l mode then I would either go ahead and ODIN back or if you can get into CWM recovery and you still have Nero 5 in your root, I would just reflash it and it should take care of it...enable voodoo when you flash Nero 5 ..you should be ok.
First off, I have been searching the forums for almost two weeks now and cannot find a solution....I have tried everything......the first problem is that no matter what drivers I use, the computer still says usb device not recognized, so I cannot get odin or heimdall to communicate, neither kies or kies mini.....
Well, now I turned it on this morning and I cannot get into cwm or dload mode.....just keeps bootlooping and linda talks and says riskful operation, then reboots......I am lost, don't know what else to do, I'm gonna throw this phone out the window
Sent from my HTC Vision using XDA App
bouzouki said:
First off, I have been searching the forums for almost two weeks now and cannot find a solution....I have tried everything......the first problem is that no matter what drivers I use, the computer still says usb device not recognized, so I cannot get odin or heimdall to communicate, neither kies or kies mini.....
Well, now I turned it on this morning and I cannot get into cwm or dload mode.....just keeps bootlooping and linda talks and says riskful operation, then reboots......I am lost, don't know what else to do, I'm gonna throw this phone out the window
Sent from my HTC Vision using XDA App
Click to expand...
Click to collapse
I would say Odin is your friend. go back to stock and start over Here is a start
http://www.youtube.com/watch?v=KyAIUOYufrU
Part 2: http://www.youtube.com/watch?v=33I-aNCypVM
hope this helps you
no dont throw the phoine out give it to mee ! or u can just remove your battery while phone is hooked up to computer with usb push volume up and volume down hold it put battery in , yellow android showed up ? u good to odin if he didnt redo repeat those steps until u will see him
how can i get odin to communicate when the computer wont read it?? it says usb device not recognized and no matter which drivers i install, it wont communicate.... and plus odin wont connect, i have tried multiple times.....heimdall drivers wont install either, it gives me a failed result.... i have used the 32 bit drivers, 64 bit drivers, kies, kies mini for vibrant, odin, heimdall, everything.... i have a g2 and have done so much to it with no problems, this phone has got me confused...
u need damn download mode for odin to see your phone damn could you just do those steps that i told you ? and btw open up odin so u can see when u phone is detected it will light up i nyellow
onc3 again
1. phone connected to computer
2.odin open
3.take out battery (out of your phone)
4.hold volume up volume down (allthe time)
5.put battery back in
6. put files in odin flash back
bouzouki said:
how can i get odin to communicate when the computer wont read it?? it says usb device not recognized and no matter which drivers i install, it wont communicate.... and plus odin wont connect, i have tried multiple times.....heimdall drivers wont install either, it gives me a failed result.... i have used the 32 bit drivers, 64 bit drivers, kies, kies mini for vibrant, odin, heimdall, everything.... i have a g2 and have done so much to it with no problems, this phone has got me confused...
Click to expand...
Click to collapse
I gotcha.... not to sound like an idiot but have you tried a different usb port? If your using one on the front, try ones in the back if your on a desktop.. if that doesnt work try running ODIN in XP SP3 compatibility mode
bartek25 said:
u need damn download mode for odin to see your phone damn could you just do those steps that i told you ? and btw open up odin so u can see when u phone is detected it will light up i nyellow
Click to expand...
Click to collapse
I think he's saying that odin doesn't detect his phone and therefore doesn't light up yellow. Happened to me too. I'm on the epic. I tried everything. But odin finally found my device. Try different usb ports, a different wire, reboot both phone and pc. Switch between usb debugging on and off. Try it with sideloading enabled and not. I eventually found a combimation that worked. These phones are fickle. It'll work eventually.
Sent from my SPH-D700 using XDA App
+1 on what he said above try connectin and disconection your phone lots of times 2 forgot it happend to me too once .sorry it was a while ago
i have used front usb ports, and the back ones, have even used 3 different computers. but same result. will odin connect even if the driver are not installed correctly and the computer doesnt recognize the usb device? and also, now i have the problem where i cannot get the phone into dload mode, it keep bootlooping to the samsung vibrant start screen and linda says riskful operation.
bouzouki said:
i have used front usb ports, and the back ones, have even used 3 different computers. but same result. will odin connect even if the driver are not installed correctly and the computer doesnt recognize the usb device? and also, now i have the problem where i cannot get the phone into dload mode, it keep bootlooping to the samsung vibrant start screen and linda says riskful operation.
Click to expand...
Click to collapse
As far as I know, ODIN wont recognize your phone without being in download mode and drivers installed on your computer.
bouzouki said:
i have used front usb ports, and the back ones, have even used 3 different computers. but same result. will odin connect even if the driver are not installed correctly and the computer doesnt recognize the usb device? and also, now i have the problem where i cannot get the phone into dload mode, it keep bootlooping to the samsung vibrant start screen and linda says riskful operation.
Click to expand...
Click to collapse
No I believe you need the correct drivers installed. At this point either your missing something or don't have the correct driver to install. Maybe someone can point out where all the proper drives are for you to download
speachless ....if u wont follow what i wrote im helpless.goodbye. and why u turning your phone on dude download mode is battery out phone connected to ANY usb port hold vol up vol down hold all time and puit battery in
if that doesent help your phones usb is **** or the cable is ****
btw, i have tried installing all the proper driver from the proper threads... 32 bit, 64 bit, ive tried kies and kies mini for vibrant, heimdall drivers also.... NOTHING WORKS...
i appreciate everones help... thank you.
This is what I do to get it working. I open odin first and load all the needed files.
I then plug the usb cord into the usb first before plugging it into the phone.
with odin open and the phone completely off. I hold down the volume rocker and plug in the usb. I get download mode to work almost everytime.
For me the stock cable I got with mine doesnt work. I have to use a different cord or it acts like it doesnt see my phone.
Hi all! The rooting guide of Intratech given here : http://forum.xda-developers.com/showthread.php?t=1075278 DOES NOT WORK! I have an SGS II Kernel version of KE8 (India) and I tried to follow the steps given in the guide, but when I open ODIN and connect my phone in Download mode with my laptop via USB Cable, ODIN is not connecting to the phone. The box meant to turn yellow does NOT change color. Nothing happens at all. Why is this so? I cannot post in the relevant thread because I am a newbie in the forun
Have you installed kies first to get the drivers?
Sent from my GT-I9100 using XDA Premium App
Yes, of course, I have the latest version of Kies installed on my laptop and I use it regularly to connect with my SGS II. I kept Kies closed when trying the rooting procedure as mentioned in Intratech's guide. Started phone in download mode. Opened Odin on laptop, then connected phone via USB........the box which is supposed to turn yellow on connection, doesn't light up. Nothing happens at all.
TheMegastar said:
Hi all! The rooting guide of Intratech given here : http://forum.xda-developers.com/showthread.php?t=1075278 DOES NOT WORK! I have an SGS II Kernel version of KE8 (India) and I tried to follow the steps given in the guide, but when I open ODIN and connect my phone in Download mode with my laptop via USB Cable, ODIN is not connecting to the phone. The box meant to turn yellow does NOT change color. Nothing happens at all. Why is this so? I cannot post in the relevant thread because I am a newbie in the forun
Click to expand...
Click to collapse
I suggest to you that the overwhelming majority of the people who use the guide will disagree with you and provide evidence to the fact that it does, indeed, work. The fact that it does not work for you suggest that you are doing something wrong or have a problem with your computer.
I would suggest that you ensure that KIES is also closed in the system tray of your computer before opening Odin and connecting the phone. Also ensure that your computer has an internet connection and is able to connect to windows update to download and install drivers. If that doesn't work then change USB port or computer.
By all means, if you find a way that works then feel free to write your own guide. More information is good and maybe others might find your method, if you discover one, easier to follow.
@Intratech: Hi. Thanks for your reply. Ok, so it is not working for me. Can you help?
My laptop is working on Windows 7 Home Premium which is upto date in all respects. My USB port is working fine as I am able to connect my SGS II to Kies through that. Kies was closed when I tried to connect to Odin. Odin version is 1.85. While the phone (in download mode) is connected to the laptop, and Odin is Open, nothing happens. Nothing.
TheMegastar said:
@Intratech: Hi. Thanks for your reply. Ok, so it is not working for me. Can you help?
My laptop is working on Windows 7 Home Premium which is upto date in all respects. My USB port is working fine as I am able to connect my SGS II to Kies through that. Kies was closed when I tried to connect to Odin. Odin version is 1.85. While the phone (in download mode) is connected to the laptop, and Odin is Open, nothing happens. Nothing.
Click to expand...
Click to collapse
Is kies closed in the system tray as well?
Yes, Kies is closed in system tray also. Fully closed. Odin opens, and I see the Odin screen as per your screen shots, but the box which is supposed to light up yellow, does not.
Are you using the Samsung USB cable or a HTC one?
Samsung USB cable which came with the phone box pack. I can see the Auto Reboot and F. Reset Time boxes checked. Nothing else is checked, not even the PDA button. The box saying ID:COM (which is supposed to light up) is blank.
u need to check pda and load the file u want to flash it
then click on start
Look in your program and features list, found in control panel, and see if you have a listing for Samsung USB driver for mobile phones there. If you do then uninstall it and uninstall KIES. Download a new copy of KIES from Samsung and install it. After installing it, make sure you don't have USB debug ticked, connect the phone and leave it until all the drivers install. After that remove the device and lose KIES. Put the tick in USB debugging and connect the phone and leave it so that any needed drivers install. After this put the phone in download mode and connect it, without opening KIES or ODIN, and leave it to download any drivers needed. If it downloads and install any drivers wait for it to finish, once it does then you can go ahead and use Odin normally.
If this doesn't work your PC is at fault, fix it.
cyberwarfare said:
u need to check pda and load the file u want to flash it
then click on start
Click to expand...
Click to collapse
How you going to flash without connecting to the device?
Turn USB debugging off on phone .USB connection should be to a motherboard port .
Reboot phone set phone to connect in USB mass storage mode .
Connect cable wait for Windows to load drivers . You should be able to browse phone via Windows explorer if USB drivers are correct .If so remove cable and reboot phone to download mode . Open Odin select files to load connect cable .
That fails then
Rooting guide of intratech does not work! for you your PC or your phone but for everyone else so give up .
jje
@cyberwarfare: Yes, I tried that. The file loaded, I pressed start. Yet nothing happened. I just saw one line notification in the left hand side column of Odin, which read something like "successes: 0/failures: 0". I am speaking from memory here. Nothing really happened even after loading PDA and pressing the Start button.
@Intratech: Yes, both Kies and Samsung USB Driver for Mobile Phones are there in my program list. I downloaded Kies from their India support site : http://www.samsung.com/in/support/d...1&prd_mdl_cd=GT-I9100LKAINU&srchword=GT-I9100
Worth mentioning here that the USB debug check box was ticked when I tried to Root with Odin.
So basically, you're asking me to uninstall & reinstall Kies and its drivers. Ok, will do. It will take time so will do it when I have a little more time on my hands. Thanks for your help & your time. I appreciate. If you have time, then look at my other post here which says, "7 major issues with SGS II" ...... and help with solving my other issues like that of bluetooth not connecting and phone ringer's erratic behaviour. Thanks a ton.
Mate I haven't used the Indian firmware so I'm not too sure about troubleshooting it. There is an Indian thread in the general forum where you may be able to get more help with the issues you have.
@JJEgan: Thanks for replying. All my USB Ports are on the motherboard itself, worth mentioning that the same USB port works fine when I connect the phone to the laptop. Am able to transfer files to and fro via the same USB port.
"set phone to connect in USB mass storage mode".....how do I do that? Where to find that in phone settings?
I am able to browse the contents/files on the phone very well...so this proves my drivers are fine. So which basically means, that Intratech's rooting guide does not work FOR ME! Happy? This may be a problem specific to the India specific phones....Kernel version is 2.6.35.7-I9100XWKE8-CL214845
[email protected] #2
PDA : I9100XWKE8
Phone : I9100DDKE2
CSC : I9100ODDKE2
Build Info : Wed May 18 13:55:45 KST 2011
@Intratech: Thanks mate. I've posted my problem in the India specific thread also.....lets see if someone replies. But the problem is not with the rooting procedure, the problem is that I can't even seem to get started with the procedure as there is no connection between Odin and the phone.
Nah, it's not with the firmware. The other Indians who use it have no issue following the guide.
Please try and reinstall everything as I've stated and see if that work. Also, when you go into download mode what do you see on the screen?
In download mode I see a static warning on the screen which tells me of the risk and tells me I have to press the VOL down button to cancel this, and there is a yellow triangle at the bottom. The screen stays there as I connect the USB cable to the laptop.
TheMegastar said:
In download mode I see a static warning on the screen which tells me of the risk and tells me I have to press the VOL down button to cancel this, and there is a yellow triangle at the bottom. The screen stays there as I connect the USB cable to the laptop.
Click to expand...
Click to collapse
You need to read the instructions start off by reading what it says on that screen .Do not read half of the instructions like you are its very dangerous flashing if you cannot read and follow the instructions and i advice you dont flash .
The screen message you are not reading is the sentence above the one you posted .
To install custom rom press Vol Up key .
jje
TheMegastar said:
In download mode I see a static warning on the screen which tells me of the risk and tells me I have to press the VOL down button to cancel this, and there is a yellow triangle at the bottom. The screen stays there as I connect the USB cable to the laptop.
Click to expand...
Click to collapse
Right this is your problem, you have not put the phone in download mode as yet. Press volume up at this screen to enter download mode and now you will connect.
Help mee.
I have bought a s3 that is locked to Orange, need to unlock, but odin does not see the phone in recovery/dl mode.
Odin see the phone in normal mode , but each time i put into start/+vol/home odin see nothing.
I have kies updated.
Thanks
crazydiamond1970 said:
Help mee.
I have bought a s3 that is locked to Orange, need to unlock, but odin does not see the phone in recovery/dl mode.
Odin see the phone in normal mode , but each time i put into start/+vol/home odin see nothing.
I have kies updated.
Thanks
Click to expand...
Click to collapse
I had a similar thing when i was plugged into a usb hub
Was ok when i plugged directly into the pc
Install Samsung Kies to be able your PC to detect your phone via Odin
also check the debugging mode in the developer options
bordikun said:
Install Samsung Kies to be able your PC to detect your phone via Odin
also check the debugging mode in the developer options
Click to expand...
Click to collapse
I have Kies, also tried debugging, i need root to unlock phone
Try to use the latest Odin
Odin v3.04
bordikun said:
Try to use the latest Odin
Odin v3.04
Click to expand...
Click to collapse
I have uninstalled the older Kies, re installed the latest.
I have installed the lastest odin.
Have tried to link up with and without debugging, odin still does not see phone when in recovery mode.
Only time odin see the phone when phone is in normal mode.
Starting to get annoyed now lol, i cant cut my sim to fit phone, untill this is done
I cant see my s2 on odin either, what am i doing wrong ????
1. Reboot PC
2. Ensure KIES is not running and kill any KIES processes in PC task manager.
3. Download mode
4. Connect USB directly to PC port (no hub)
5. Wait for any drivers to instal or load on PC
6. Start Odin in administrator mode
If still no good;
a) Different USB cable
b) Different PC USB port and wait for drivers
Sent from my GT-I9300 using xda premium
Thanks . Seems that I had been pressing volume up not down.
I have another question . I used chainfire Rom to debrand the phone but keis does not recognize . How can I solve this . Could it be because the phone is rooted ?
i am having this problem at the mo, I have tried all of the above, apart from a different pc.
oden worked fine with my galaxy s2
is there any more updates on how to sort this out please?
thanks
ian
I know this is a 7 day old thread, but I feel for you having been in the same situation. Firstly, have you installed the Android SDK? If not then I advise you to do so. Do a search on how to install the SDK. There maybe smaller downloads available with a package of the binaries you need to do some testing i.e. adb. The instructions will elaborate about how to set up your Environment settings in Windows. Essentially ADB needs to be called from within any part of your Windows system....or else you will have to cd to its location each and every time you want to do something like this. So once you have done that, open command prompt and type adb and see what comes up? If it says bad command or file name it means your environment settings for the ASK are incorrect, if it displays the adb help text in command prompt you are ready to proceed.
When you plug your device in (not in DL or recovery modes) is it detected by the PC? If so then your drivers are probably fine. If not then it maybe 1 of 2 things? 1 the device is detected but the MTP drivers have not been loaded or 2. No detection what so ever and all drivers need to be installed.
To determine how to proceed you will need to do a bit of investigating.
Note the USB drivers are included as part of the Android SDK.
Check in Device manager inside of Windows to see if anything is detected when you plug it in. If so but it has a yellow exclamation ! then it would indicate you need to update your drivers (but not always?). From here you can test to see if the phone is detected and you only need MTP drivers.
If not then I would suggest uninstalling Keis all together and downloading and installing the Samsung USB drivers separately. Install the drivers. Plug in the phone. If it is not detected straight away, then reboot the PC then plug the phone into a different USB port. From here you can determine how to proceed by using adb.
plug your phone in via USB and open command prompt and type this: adb devices
You should see 1 of 2 things.
1) The words "list of devices attached" followed by a 16 digit long ID number a gap and the word "device"
2) just the words "list of devices attached" and then blank and nothing else?
If a device ID is returned then you can proceed with the following. Otherwise you need to do some additional trouble shooting
Proceed here:
Once it is detected by Windows and shows up in Explorer then unplug the phone and go into settings and developer options and check enable USB debugging. Once you have done this it should allow your device to be seen in DL and recovery modes.
Troubleshoot: If not detected try the following:
1) Reboot the PC and plug into a new USB port that you have not previously plugged into.
2) Try disabling USB debugging plugging the device in and then unplugging it and reenabling USB debugging
3) From the status bar try switching modes between MTP and PTP modes. Wait a good minute or so between to allow Windows to detect the driver change. Tip a good indication is your notification tray Icon with green USB disk with a magnifying glass swirling around....Note if you cannot see this at all you probably should drag it into the notification panel so that you CAN!
4) Open up device manager again and ensure no yellow exclamation marks !
Once all this is right and you can get List of devices attached followed by an ID number then you can for sure be able to detect your device from Odin. Make sure you are running Odin 3.04, run it as admin (not necessary but have heard that it helps?)
Good luck
James
I have an S4 Active that NO MATTER WHAT I DO, Odin will NOT see phone in Download mode, it will with the phone on, and my PC will see the phone, but not Odin. I am stumped. I have tried 3 PC's, I have ALL the drivers and then some. I am Stumped.
rekamyenom said:
I have an S4 Active that NO MATTER WHAT I DO, Odin will NOT see phone in Download mode, it will with the phone on, and my PC will see the phone, but not Odin. I am stumped. I have tried 3 PC's, I have ALL the drivers and then some. I am Stumped.
Click to expand...
Click to collapse
have you tried factory resetting the phone?
afasayan said:
have you tried factory resetting the phone?
Click to expand...
Click to collapse
Several times
rekamyenom said:
Several times
Click to expand...
Click to collapse
You can try with minimal/no drivers i.e. uninstall kies if you have it and delete the drivers you might have installed on your own-it sounds counter productive but it has worked for me a few times.
You can also try to either install kies or the drivers separately.
Try the forum for your own phone, the people there might know better about this problem.
Also what OS are you on?
afasayan said:
You can try with minimal/no drivers i.e. uninstall kies if you have it and delete the drivers you might have installed on your own-it sounds counter productive but it has worked for me a few times.
You can also try to either install kies or the drivers separately.
Try the forum for your own phone, the people there might know better about this problem.
Also what OS are you on?
Click to expand...
Click to collapse
I will give all that a try. I'm on 4.4.2 build NH3. That's why I need Odin, to get back to build NE3
rekamyenom said:
I will give all that a try. I'm on 4.4.2 build NH3. That's why I need Odin, to get back to build NE3
Click to expand...
Click to collapse
By OS I meant the computer's OS.
afasayan said:
By OS I meant the computer's OS.
Click to expand...
Click to collapse
I have tried several computers using Windows 7 and Windows XP both 32 and 64
Everytime i try to use odin to return to stock firmware or anything else, it always gets stuck on "SetupConnection.."
how do i fix this?
yj121 said:
Everytime i try to use odin to return to stock firmware or anything else, it always gets stuck on "SetupConnection.."
how do i fix this?
Click to expand...
Click to collapse
Just please keep it in that thread. There was no need to make another
Also: http://www.google.com/search?redir_esc=&redir_esc=&hl=en&client=ms-android-samsung&source=android-browser-suggest&v=200400000&qsubts=1345330202052&action=devloc&q=odin%20stuck%20on%20setup%20connection
Sent from my SGH-I777
i tried the stuff on the links google gave me, still not working
I sure hope you're in the right forum, your Odin says Epic 4G for some reason.
Have you tried starting Odin on the PC before plugging in your phone?
karate104 said:
I sure hope you're in the right forum, your Odin says Epic 4G for some reason.
Have you tried starting Odin on the PC before plugging in your phone?
Click to expand...
Click to collapse
Mine said Epic 4g as well
Sent from Team Pirate
i have version 1.85 and it says epic 4g idk why though.
Huh. Maybe I just never had to use Odin that much and it really does say that. :silly:
Anyway, yj121 did you go ahead and try starting Odin first, then plugging your phone in? Did that not work?
karate104 said:
Huh. Maybe I just never had to use Odin that much and it really does say that. :silly:
Anyway, yj121 did you go ahead and try starting Odin first, then plugging your phone in? Did that not work?
Click to expand...
Click to collapse
should i put the phone into download mode prior to connecting it to my computer?
yj121 said:
should i put the phone into download mode prior to connecting it to my computer?
Click to expand...
Click to collapse
this is what comes up
EDIT: So I guess you have to plug the phone into the computer to get into download mode, but it should work so long as Odin is already running. Your picture seems to indicate that Odin is indeed recognizing your phone and attempting to write to it, so that's good.
You should tell us what you're trying to do, what packages you downloaded, what happened to your phone beforehand, what guides you're following, etc. More information will help us figure out what you're having problems with. Then maybe someone smarter than I can help you figure out what's happening.
karate104 said:
EDIT: Ignore this post for a sec while I try to figure out how to enter download mode again xD
Click to expand...
Click to collapse
plug in your phone to the computer (while its on) and hold down power, volume up and down buttons. when the thing pops up, let go of all the buttons and hit volume up, that should bring you into download mode.
OR
turn ur phone off, while plugging in your powered-off phone to the computer, hold the volume up and down button.
I edited my post again. Tell us what you're trying to do, someone else will hopefully help you out, because I'm pretty stumped at this point.
karate104 said:
I edited my post again. Tell us what you're trying to do, someone else will hopefully help you out, because I'm pretty stumped at this point.
Click to expand...
Click to collapse
I'm trying to go to stock rom, like firmware that came out-of-the-box but everytime i try to use ODIN it doesnt let me, ive tried mutiple ways such as disabling debugging, trying to use different .tar files, different versions of odin, different ways of going into odin (starting odin first, plugging phone in/out of odin) restarting my phone several times, pulling out sim/sd card, making sure kies isnt running in the background, etc. none of these ways work for me. everytime i go, ODIN gets stuck on SetupConnection.. or it goes after SetupConnection but then fails at Complete(Write) operation failed. i have also tried using a one click thing where i just plug in the phone, and then i hit start and it should go (Picture attatched) but that doesnt seem to work either. ive been doing this the ENTIRE day and its starting to frustrate me because there is no way to go back to stock firmware in case i have to give in my phone for repair or something.
I didn't say this earlier because its obvious. But u do have the proper drivers already installed for the phone I assume....
Sent from my SGH-I777 using Tapatalk 2
yea i already have the right drivers installed, i checked in device manager before i started
This could be due to a number of possible issues: The computer you are using, USB port, USB cable, usb driver, user error. Those are the main things to look at.
In Windows 7 "Uninstall or change a program" dialog (or Add Remove Programs in earlier versions) you should see SAMSUNG USB Driver for Mobile Phones. If you suspect it is a driver issue, uninstall this item, reboot and reinstall, then reboot again.
However, first I would suspect a bad cable or a bad port. Just changing ports, or changing to a good cable (the one that came with the phone is usually the best choice) could solve the problem. Or using a different computer.
Just to make sure it's not user error, here is a set of checkpoints:
How to use stand-alone Odin3 to flash firmware:
Follow and recheck each of the following steps. Do them in order listed, as some steps are dependent on previous steps. Instructions are for Odin3 v1.85. It should work with any version of Odin, but some details, like color of items, may be different.
1.) Open Odin on the Windows Desktop.
2.) Have the USB cable plugged into USB port on the computer, but *Not* plugged in to the phone.
3.) Shut the phone off.
4.) While holding down the vol+ & vol- keys, plug micro-usb plug into phone.
5.) In Odin, you should get the yellow box under where it says ID:COM with the text 0:[COMx], and in the Message area, <ID:0/00x> Added!! where x is some number, usually 1-8.
6.) In Odin, make sure Auto Reboot and F. Reset Time are checked and all other items are not checked.
7.) Click on the PDA button. Browse to the tar file you want to install and select it so its path appears in the text edit box next to the button.
8.) Make sure the check box next to the PDA button is checked.
9.) Click the Start button.
10.) You should see the green progress bar advancing. Success!
creepyncrawly said:
This could be due to a number of possible issues: The computer you are using, USB port, USB cable, usb driver, user error. Those are the main things to look at.
In Windows 7 "Uninstall or change a program" dialog (or Add Remove Programs in earlier versions) you should see SAMSUNG USB Driver for Mobile Phones. If you suspect it is a driver issue, uninstall this item, reboot and reinstall, then reboot again.
However, first I would suspect a bad cable or a bad port. Just changing ports, or changing to a good cable (the one that came with the phone is usually the best choice) could solve the problem. Or using a different computer.
Just to make sure it's not user error, here is a set of checkpoints:
How to use stand-alone Odin3 to flash firmware:
Follow and recheck each of the following steps. Do them in order listed, as some steps are dependent on previous steps. Instructions are for Odin3 v1.85. It should work with any version of Odin, but some details, like color of items, may be different.
1.) Open Odin on the Windows Desktop.
2.) Have the USB cable plugged into USB port on the computer, but *Not* plugged in to the phone.
3.) Shut the phone off.
4.) While holding down the vol+ & vol- keys, plug micro-usb plug into phone.
5.) In Odin, you should get the yellow box under where it says ID:COM with the text 0:[COMx], and in the Message area, <ID:0/00x> Added!! where x is some number, usually 1-8.
6.) In Odin, make sure Auto Reboot and F. Reset Time are checked and all other items are not checked.
7.) Click on the PDA button. Browse to the tar file you want to install and select it so its path appears in the text edit box next to the button.
8.) Make sure the check box next to the PDA button is checked.
9.) Click the Start button.
10.) You should see the green progress bar advancing. Success!
Click to expand...
Click to collapse
I got this error ODIN now that i changed USB ports (see picture)
yj121 said:
i got this error odin now that i changed usb ports (see picture)
Click to expand...
Click to collapse
nevermind!!! I switched usb ports again and it worked!!!! Thanks sooooooo much!!!!!
yj121 said:
nevermind!!! I switched usb ports again and it worked!!!! Thanks sooooooo much!!!!!
Click to expand...
Click to collapse
THANK YOU!
yj121 said:
I got this error ODIN now that i changed USB ports (see picture)
Click to expand...
Click to collapse
hey u seem resourceful can u help me. ive done the odin process but wen my phone rebooted it goes to Samung GALAXY S2 GT-19100 screen it wont load up or anything ive tried the odin thing again an it wont i can get to the downloader screen but thats abt it im stuck i really need this phone any way i can fix it?
ok guys, first things first. YES i did search, i read threads for hours. So if your just gonna come to bash on me... get off it.
So i had a bad flash, oh no. Phone was stuck in a bootloop, got it to download mode and put it thru odin. Well odin said FAILED. now i can still get into DL mode but its no longer a bootloop, now its a lil picture of a phone linked to a computer when i turn it on.
SO heres the prob, i can get into DL mode, but odin refuses to recognize my phone. Ive tried other usb ports, other cords, unistalled and reinstalled odin and the drivers. USB debugging is off says aio toolbox. So what do i do now? any suggestions im not thinking of?
Any help is greatly appreciated and will b thanked. =)
Phone to PC screen still should be able to flash through.
Have you tried a different computer? One that your phone has never been in contact with?
What was the FAILED error when you tried to ODIN initially?
Can you get into recovery by chance?
i have tried a different computer, but not one it has never been on b4.
And toast, i actually dont know if i can get into recovery. Im about to look up how and try that
WhiteBoyAwesome said:
i have tried a different computer, but not one it has never been on b4.
And toast, i actually dont know if i can get into recovery. Im about to look up how and try that
Click to expand...
Click to collapse
Gingerbread bootloader uses this combo:
For Recovery - Lower Volume Key + Power Button
For Download - Upper Volume Key + Power Button
If you have Froyo bootloader:
For Recovery - Both Volume Keys + Power Button
For Download - Both Volume Keys and Connect USB Cable
alright, i can use the hardware buttons to get into download just fine. But when i try to get into recovery it only gives me the Phone -- ! -- Computer icon. ITs getting annoying lol
Ok. I didn't figure that would work, but it wasn't going to hurt anything to try do you have any friends with Macs? You could try it on one of them with Heimdall. That would be another option to try.
Also, check out this thread: http://forum.xda-developers.com/showthread.php?p=8149503
Read all the posts, there is some good stuff in there.
+1 on recommended thread. It sounds just like your issue. Definitely try the Heimdall AIO one click t959 for Windows.
sent from the depths of helly bean
nothin yet :/
Google eugenes froyo that does not brick, read the op carefully, because after you odin the tar file, you will have an error message, thats ok, odin eclair and you should pass.
Read it 10 times, you'll reboot in cwm with an error message, ok, reboot, download, eclair.
stupid question sorry, but do you have sdk platform tools installed?
im not sure. i downloaded something called sdk manager, but it closes the moment u open it.
SDK platform tools is a large program, But if your computer has recognized your phone up till now, you probly have the right drivers, by the way have you cleaned your usb port? toothbrush and an electronics cleaner or alcohol very lightly, never know.
ok guys. heres the update. I tried all the links you guys have kindly tossed my way. nothin. Im on a different computer even and downloaded the drivers, odin, toolbox, etc. The phone still isnt recognized. I Have no clue why, is the reason cause usb debugging is off? the only 2 screens i can get to r download and phone ! computer. Am i bricked for good??? =(
WhiteBoyAwesome said:
ok guys. heres the update. I tried all the links you guys have kindly tossed my way. nothin. Im on a different computer even and downloaded the drivers, odin, toolbox, etc. The phone still isnt recognized. I Have no clue why, is the reason cause usb debugging is off? the only 2 screens i can get to r download and phone ! computer. Am i bricked for good??? =(
Click to expand...
Click to collapse
You are putting your phone into download mode before using odin right? You must have your phone in download mode for odin to recognize it. I'm guessing you have done this but I wasn't sure after reading through this thread, hope you get up and running again.
Sent from my SGH-T959 using Tapatalk 2
iTz KeeFy said:
You are putting your phone into download mode before using odin right? You must have your phone in download mode for odin to recognize it. I'm guessing you have done this but I wasn't sure after reading through this thread, hope you get up and running again.
Sent from my SGH-T959 using Tapatalk 2
Click to expand...
Click to collapse
yep. tried multiple combos as well
Hey I think you should follow this..
1. Connect your phone with computer without battery
2. Press volume down and power button simantaniously for getting download mod
3. After 30 or 60 second pull back battery into phon with holding buttons
4. Odin ditect your device almost surely...
Thanks..
Sent from my GT-I5510 using xda premium
Ok, I just went through this over the past weekend with a spare Vibe that I have. Odin would not recognize it at all for my. I would here the Ding and then nothing. No yellow COM box, no driver installation, nothing.
Here is what I did:
First I went into Device Manager and with the phone plugged in (needs to be plugged in so you can see the yellow!), I uninstalled everything with Samsung's name tagged to it (including my SGS3 and SGS2 drivers).
Then I went here and downloaded and installed Heimdall (take note that you have to make sure that libusb-1.0 is correctly installed). There is an exe file in there (might be in the Heimdall thread here in the Vibe section), that allows you to update the drivers. That is where you would replace the Windows with libusb-1.0.
Then I plugged in my USB to PC and to phone and put it in Download mode. Nothing. So I left it plugged into the phone still but unplugged from PC and move ports. I have 3 ports and believe it or not, the one farthest from the power source/MB was the one that work. As soon as I plugged it in, I heard the Ding and saw the box pull up auto-installing the drivers.
After that, I went to Utilities in Heimdall to make sure detected. It was and I flashed Mr_Psycho's package (no pun intended ) via the normal Heimdall instructions.
Believe me, I have spent a ton of time on this and troubleshooted everything from dead USB to dead motherboard. It was a real PITA.
Edit:: If you need any of the files, Heimdall version or Drivers, just PM me and I will send them to you. You are not Bricked, just your PC's vision is clouded a bit.
woodrube i greatly appreciate the mass amount of help. i will try all the above as soon as im home and report back to u
alright, i deleted everything, reinstalled, tried heimdall still nothing. I am in download mode but laptop wont recognize anything. it says the correct drivers are installed but then says usb device not recognized, this is killing me as i need my phone imma post a video tonight of what im doing, hopefully someone sees im doing something wrong