after first reboot hangs.... - HD2 Windows Mobile 6.5 Q&A, Help & Troubleshooting

Maybe stupid issue or doing something wrong but problem is that hd2 hangs after reboot.
I wrote 1.42hspl,and duttys,kwbr firmware,after flashing one time boots,works after reset or power off will newer work again,i have to do hard reset.Whats wrong?

Dikiz said:
Maybe stupid issue or doing something wrong but problem is that hd2 hangs after reboot.
I wrote 1.42hspl,and duttys,kwbr firmware,after flashing one time boots,works after reset or power off will newer work again,i have to do hard reset.Whats wrong?
Click to expand...
Click to collapse
I think you forgot to flash corresponding Radio - look for recommendations in the first few posts of ROM's thread.

Maybe,
But Always do a Task 29, then Flash new Radio (Warning .51 or .50 rom radio) , then Flash a Rom

Related

Flashed to no2chem's 6.1 rom and now phone reboots on its own, any suggestions

I've flashed to no2chem's rom and installed the 3.27 radio...phone works for a little then all of a sudden reboots and when i try to make calls it says its not authorized
now it just reboots before im able to even finish loading the device all the way
what should i do?
Just a few posts down from yours:
http://forum.xda-developers.com/showthread.php?t=374293
Not authorized issue also thoroughly discussed. Try searching a bit.
thanks but i've abanonded no2chem's rom. im still having problems calling (saying im not authorized) which im sure has been discussed but im having trouble finding it
The problem is not no2chem's rom, but most likely the wrong bootloader.
If you even try searching the word "authorized" you will find that you need to call Verizon.
you need to update the Radio to 3.27. Then it'll work.
I'm having the same problem just my Mogul is for SPrint.... Any sugguestion why It resets it self?
emillz615 said:
I'm having the same problem just my Mogul is for SPrint.... Any sugguestion why It resets it self?
Click to expand...
Click to collapse
For the Millionth time......
You MUST have matching bootloader, ROM, and radio!!!!
Read carefully.
http://forum.xda-developers.com/showthread.php?t=371314
quick note, this time there actually is a different possible reason (but it results, again, on not completely reading instructions *sigh*)
On no2chem's 6.1 rom 5050 and later, when you install you *must* do a hard reset and pull the battery for 2-3 minutes. This allows the dohicky to reset the thingermajig, causing everything to magically not reboot.
if you read his posts, he explains everything using slightly less technical terms, but if you do this, it'll work.
taxilian said:
quick note, this time there actually is a different possible reason (but it results, again, on not completely reading instructions *sigh*)
On no2chem's 6.1 rom 5050 and later, when you install you *must* do a hard reset and pull the battery for 2-3 minutes. This allows the dohicky to reset the thingermajig, causing everything to magically not reboot.
if you read his posts, he explains everything using slightly less technical terms, but if you do this, it'll work.
Click to expand...
Click to collapse
Yup. This step is the most crucial. Without it you won't get beyond the initial splace screen.
6700user said:
I've flashed to no2chem's rom and installed the 3.27 radio...phone works for a little then all of a sudden reboots and when i try to make calls it says its not authorized
now it just reboots before im able to even finish loading the device all the way
what should i do?
Click to expand...
Click to collapse
I had the same problem, i was using the wrong hard spl, i was using 1.20. The correct spl is 2.40 after using the correct one no problem at all. If it helps I'm new at this myself.
still not sure why anyone still uses the crappy, buggy, beta 3.27 radio. radio 3.35.04 is out and should be used with all new roms.

Phone not booting

Hello
First off not sure if I should post here so my appologies in advance if I made mistake.
I have been flashing my HTC Hero for some time now and lately I have been expiriancing that phone will not boot at all. It just hangs with HERO logo and its stuck there.
Sure I can reflash it again but same thing happens again after few days of use and I AGAIN needed to reflash my phone.
Right now I am using SuperHero rom but same error came up with VillainRom and Crons so I dont think its ROM related.
Radio is not flashed in a while now so I do not think thats the problem eather.
So my question is does anyone here has same issue as me and can it be fixed ?
Thanks
I don't have that issue but if you are using amon_RAs recovery you should wipe everything. factory reset, dalvik wipe, ext wipe if youre using a2sd. then flash a new radio image:
http://forum.xda-developers.com/showpost.php?p=4594434&postcount=2
the last one there "63.18.55.06JU_6.35.09.26"
unfortunately your issue can be related to anything and pretty much nobody can guess. still as I see in your signature your radio is pretty much outdated and some ROMs seem to have broken a few radios. I think it's pretty much recommended that you sometimes re-flash your radio because of some broken ROMs out there. That's just what I have read but as I am not a developer I can't tell. So if you're having issues with your phone re-flashing does not hurt you, but if everything works fine there is no need to do that.
in short: imho wipe _everything_ and re-flash _everything_ and _don't_ restore nandroid backups or so, that way wiping does not make much sense
Update your Radio and Recovery maybe?
Sorry guys, but my signature is outdated.Will be updating it right away.
Of course I updated RADIO (some time ago) and version that I am using now is 63.18.55.06JU_6.35.09.26.
I always wipe everything before I use new ROM and setup everything from scratch. No restores at all.
@Feeyo what do you mean by update recovery (radio part I understand) ?
Thanks guys, still need input, ideas
Moved as not Android Dev.
Same thing is happening with my hero, only happened recently after i started using overclocked roms however, maybe something is wrong with the CPU?

Having problems booting., freeze..

Had flashed my HD2 to Artemis and after some minor problems i decided to flash back to stock room and flash to lates Artemis.
Did as i allways do: Took out Simcard / SD card and flashed stock room.
The flash went as allways and finished but when the phone restarted it got stuck in the first screen (White background with HTC logo on, right before the red writings stating Radio version etc appears, and cant get any further. Phone stays there for maybe 20 sec then reboots and same happends.
Have tried to flash the stock room via SD card not, but same happends.
Any ideas?
Stock room is: _HTC HD2_RUU_Leo_HTC_NOR_1.66.409.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship
Up we go..
Thnx
if it rebooting itself, then its likely a bent battery pin.
PLus, as soon as you flash a stock rom from sd, (even if the flash hangs at 0%) then it removes hspl, so be aware of that when you get it working and try to flash a cooked rom again.
samsamuel said:
if it rebooting itself, then its likely a bent battery pin.
Click to expand...
Click to collapse
Non of the pins are bent, all of them are 100% perfect. Have also tried 4 different batteries to eliminate a problem with the battery, without any luck.
If the pin had been bent i would asume that it would reboot immediately, but the phone shows the HTC logo and the white background for 20-30 sec, then reboots.
samsamuel said:
PLus, as soon as you flash a stock rom from sd, (even if the flash hangs at 0%) then it removes hspl, so be aware of that when you get it working and try to flash a cooked rom again.
Click to expand...
Click to collapse
I'm aware of that, but cant even get the phone to boot right after i've flashed the stock rom, flashing went as normal without any sign of error, and rebooted with the red button after that.
Any other ideas guys?
Eggy88 said:
Any other ideas guys?
Click to expand...
Click to collapse
Were you able to perform Task29? Am just thinking loud here, it may help. I had a similar problem on my wizard and it came out to be that damn battery pins. I know you have tried alternatives but just my two pennies here.
similar problem, same artemis rom HERE
you should both post in the artemis rom thread.
nicedude_abad said:
Were you able to perform Task29? Am just thinking loud here, it may help. I had a similar problem on my wizard and it came out to be that damn battery pins. I know you have tried alternatives but just my two pennies here.
Click to expand...
Click to collapse
I have never been able to preform Task29 with the exe, i allways get an error before the program starts, but as i have flashed the stock room, and hard reset before flashing cooked room this should not be necessary (Flashing stock room also includes Task29 if i'm not wrong)
samsamuel said:
similar problem, same artemis rom HERE
you should both post in the artemis rom thread.
Click to expand...
Click to collapse
Could be, but i cant see any reason why Artemis should couse this. Note that this happend before i flashed the lates Artemis. Right after stock room was flashed. Used the same Stock room file as i have used before (have flashed close to 20 cooked rooms) so the file should not be damaged eather.
The other user you linked to got Artemis 23 up and running, and then the problems started after doing custom mods to it. This was not the case here.
had a similar issue also on the latest artemis, please post details, radio version, spl
RaiderX303 said:
had a similar issue also on the latest artemis, please post details, radio version, spl
Click to expand...
Click to collapse
Before the flashing:
Artemis 22WWE
Radio 2.12.50.02_2
HSPL2 1.66
Flashing stock room
_HTC HD2_RUU_Leo_HTC_NOR_1.66.409.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship
Radio: Stock in HTCNOR_1.66.409.1 (2.06.51.07)
HSPL2 1.66
How did you get yours up and running again, couse no matter what i do now the same problem happens

[Q] Slide to Answer problem, anyone else?

The Intro: Hello everyone, my phone has a bit of a problem, I bought it about 1 month ago, and it didn't have this problem, so I hope your community can help me and other who have or will have this issue.
The problem: When someone calls my phone, I slide to answer the call, but when I reach the left margin, the bar turns from green to red/ignore and rejects the call, Also sometimes people call me and they cant reach me for some reason the operator sais my phone is off or out of coverage area. (Could be the network, it is pretty busy this time of year) so it's not yet confirmed as a problem.
The story: Skip this if you get bored
I purchased my HD2 from a close friend, unlocked, unbranded, it had HSPL 1.42 on it, and an old version of KWBR's rom. I installed hspl 2.08, and flashed the recent 3.14 version, and updated the radio as well. All was good, but since I flashed the final version I have been experiencing the problem, once every 5 or 6 calls it rejects a call.
What I tried: Hard reset, with no software instaled, Flashed another radio using task29, did flash a different rom also 3.14 based. Nothing worked
Solution:
1. Just use the hard answer button, not exactly comfortable, but hope its temporary
2. Being used to answering with slide, just calling everyone back and apologize
P.S.
I used the search function to find an answer, but no luck, If there is a solution please give me the link to it, and please be patient with me
If I made mistakes in the text, sorry, hope you can understand what I want to say. My english is not the that good.
Pocketshield has a slide to answer screen that can help
barbarosie_alexandru said:
I installed hspl 2.08, and flashed the recent 3.14 version, and updated the radio as well.
,I used the search function to find an answer, but no luck,
Click to expand...
Click to collapse
so you didn't find any of the LOADS of threads that say "you cannot run 3.14 rom with hspl or any spl lower than 3.03.0000"
either stop using 3.14 based roms or upgrade your spl to 3.03.0000
Well, I understand your frustration, but here is an answer for you:
Tryed a 2.13.531.1 based rom, with hspl 2.08. No change
Flashed spl 3.03.0000 with both based roms 2.13.531.1 and 3.14, still no luck.
I did read the LOADS of threads, but I also tried it as I read that it is posible, and it ran fine, still does...
Any other ideias?
rkrims said:
Pocketshield has a slide to answer screen that can help
Click to expand...
Click to collapse
I dont want to change the slide to answerscreen, just want it to work. Thanks for your sugestion.
Like samsamuel mentioned it before;
Don't use HSPL and Stock ROM 3.14 together.
Proposal; remove HSPL and flash stock ROM 3.14 again.
Hi
kurt-willems said:
Like samsamuel mentioned it before;
Don't use HSPL and Stock ROM 3.14 together.
Proposal; remove HSPL and flash stock ROM 3.14 again.
Click to expand...
Click to collapse
Done, stock spl, stock rom, no change.
BUT, I investigated the problem a bit more and this is what I discovered:
When I press the barr to slide to the left, I unintentionally press the right side of the screen, releasing the bar to answer, the right side of the screen is still pressed
Can anyone confirm that my habit is the problem?

[Q] Please Help a Dying HD2

Hello everyone, hopefully you can help me figure out what's wrong with my HD2.
.:BACKGROUND INFO:.
I bought a used TMoUS HD2 a couple months ago and it was working fine up until last month. At first, it would freeze and I would have to do a battery pull, but as time went on, it froze more and more often. One day, I think it froze around 20 times in a row. Eventually, I let the phone sit without the battery for a few minutes before I tried booting it again. When it did boot, I figured maybe there's something wrong with the software, so I did a hard reset. After the hard reset, the phone will boot into the desktop and then freeze (If I'm lucky) or sometimes it will just freeze on the T-Mobile "Stick Together" screen. I tried flashing a the stock ROM and it would always stop at 8%.
I've always used the stock ROM since I got the phone, not sure if the previous owner flashed it before, but it does have HSPL 2.08. The only thing I've done to the phone are the registry tweaks I got from these forums. Here's a list of applications I installed to my HD2:
Chainfire 3D Driver Update
Co0kie's Home Tab
appelflap HTCRamDisk
ATT WAP MEdiaNet and MMS Settings
Band Switch V2.8 Auto Disconnect Data
Battery Increment Display 1.66 ROMs
CleanRAM
ClearTemp v1.3.1
GoogleMaps
JayVee Disable Clock Flip
Long Press Send Key Alt Tab
RAMDisk Opera Cache
TCPMP v2 Video Audio Player
TX Opera Mobile 10 Flash Support
WM Long Life 0.66. 0302
Not sure if this is relevant or not, but the last thing I remember installing was Co0kie's Home Tab before the freezing started.
.:HD2 SPECS:.
OS Version: 5.2.21892 [21892.5.0.89]
Manila Version: 2.5.20121412.2
Rom Version: 2.13.531.1 [90963] WWE
Rom Date: 04.28.10
Radio Version: 2.10.50.26
Protocol Version: 15.39.50.07W
.:THINGS I'VE TRIED:.
Flashing a Custom ROM via USB will stop randomly at different percentages depending on which ROM I flash. I've tried a few different ones.
Flashing the stock ROM
(RUU_Leo_1_5_TMOUS_2.10.531.0_Radio_Signed_15.34.50.07U_2.08.50.08_2_Ship) via USB always stop at 8%.
Flashing the stock ROM
(RUU_Leo_1_5_TMOUS_2.10.531.0_Radio_Signed_15.34.50.07U_2.08.50.08_2_Ship) via SD card will give me an error (RADIO_V2 - RSA Fail). I've attached a picture of this error.
Since flashing the stock ROM via SD Card gives me an error (RADIO_V2 - RSA Fail), I decided to flash a new Radio (Radio_Leo_2.15.50.14), but it gives me the same error. (I've also attached a picture of this error) I haven't tried other ones because I'm not exactly sure which ones to try and I don't want to brick my phone...if it isn't already bricked yet.
Can anyone suggest some Radio that's safe for me to try flashing for my TMoUS HD2? I'm really out of ideas on what to do besides that, any suggestions would be greatly appreciated!
***EDIT 1*** (01.21.11) - Tried Task29, went all the way to 100% but the phone fails to reboot. Flashing a ROM after Task29 doesn't work Also added a picture of the bootloader screen.
***EDIT 2*** (01.21.11) - Added a list of radio and ROMs I've tried flashing in post #9.
You can flash any radio with .50. in the name.......
NEVER flash a .51. these will brick your phone.
However this doesnt sound like a radio problem. The only thing I can think to suggest is to read up on "Task 29" this will completely format your device memory and should allow you to reflash a new ROM.
Best of luck........
Thanks for your reply, Conantroutman! I just tried Task29 and it was stuck at 58% the first time, and the second time it completed all the way to 100% (With a success message from my PC) but my HD2's screen just goes black instead of rebooting. After a battery pull, I tried installing the stock ROM and the same thing still happens. It stops in the middle of updating and says there's a communication error.
Any thoughts?
Sorry, the only thing left to suggest is to try the whole process again on another PC. Also try uninstalling active sync / wmdc from your PC and trying again.
Chipped From The Bunker Via A Sandwedge
No need to be sorry I really do appreciate the help! Would upgrading/downgrading the HSPL do anything?
If it stops working using the pc then try using the sd card method.
Do a search for hd2 sd card flashing and you should find out how...
Might be more lucky without the pc in the mix, especially if there are communication errors involved...
Cheers...
ultramag69 said:
If it stops working using the pc then try using the sd card method.
Click to expand...
Click to collapse
I've actually done that as well. The flash also fails but at least it gives me an error (which I've posted a screenshot of in my first post). Not that I know what it means though Hopefully someone with more knowledge can help me decipher it.
Just a question, did you changed previously your radio? If yes to witch one?
kurt-willems said:
Just a question, did you changed previously your radio? If yes to witch one?
Click to expand...
Click to collapse
I've been reading up on how to flash stuff since I got the phone last year, but I never tried to flash anything until the beginning of this week. I'm not sure if the previous owner did though.
These are the radio I've tried this morning:
-2.10.50.26
-2.11.50.20
-2.11.50.26
-2.12.50.02.2
-2.14.50.04
-2.15.50.14
I used the SD card method to flash all the radios above. Some of the radios failed before the progress bar finished, but some actually went all the way. The phone doesn't reboot itself after it finishes though, so I have to do a battery pull. It doesn't seem to make a difference since I still can't flash any ROMs after I flash the radio.
And these are the ROMs I've tried to flash:
-CR192 Desire HD v6.5.3.0.9 Beta
-RUU Leo 1 5 TMOUS 2.10.531.1 Radio Signed 15.34.50.07U 2.08.50.08 2 Ship
-RUU Leo 1.5 TMOUS 2.13.531.1 Radio 15.39.50.07U 2.10.50.26 Signed LEO Ship
-RUU Leo 1.5 TMOUS 3.14.531.1 Radio Signed 15.42.50.11U 2.15.50.14 2 Ship
After leaving the battery out of the phone for a day, I tried Task29 again and managed to complete it (all the way to 100% and a proper restart) without freezing. So then I tried flashing a stock rom, but that stopped at around 8%. When I go into bootloader now, it seems that my HSPL has been removed and I'm reverted back to regular SPL.
If I decide to use Task29 again or flash a stock rom, do I need to install HSPL? Should I install HSPL first or just leave it alone and flash normally?
kin869 said:
After leaving the battery out of the phone for a day, I tried Task29 again and managed to complete it (all the way to 100% and a proper restart) without freezing. So then I tried flashing a stock rom, but that stopped at around 8%. When I go into bootloader now, it seems that my HSPL has been removed and I'm reverted back to regular SPL.
If I decide to use Task29 again or flash a stock rom, do I need to install HSPL? Should I install HSPL first or just leave it alone and flash normally?
Click to expand...
Click to collapse
Yes, install the right HSPL first. Then, do task 29, then you install the correct radio, lastly you can install custom rom.
Good luck
silverwind said:
Yes, install the right HSPL first. Then, do task 29, then you install the correct radio, lastly you can install custom rom.
Good luck
Click to expand...
Click to collapse
Thanks Silverwind, I'm using HSPL3 to install HSPL 2.08, but it always fails. I can install regular SPL 2.08 perfectly fine though. I'll leave the battery out for a day and try again to see if it makes any difference.

Categories

Resources