I have digged this forum looking for a solution to fix my phone and i cant seem to find anything....
Here is my issue
i rooted my phone, im still using stock rom with the latest update
then i flashed the voodoo lag fix via clockworkrecovery and now my phone
is stucked in the vibrant screen. I cant get into download mode or recovery
Please help.
I'm subscribing to this thread.
Can't wait to see the development of this project.
Is this a new ROM?
Here ya go.
Coming from the bionix thread and Som himself
This is done at your own risk.
1. Download Eugenes 'Froyo that does not brick' file.
2. Extract the files.
3. Open Odin, plug in your phone, then put it into download mode.
4. load the PIT file in appropriate area.
5. load the .tar file in the PDA area.
6. DO NOT check 're-partition'.
7. Click start, let it finish. Your phone will load and reboot into stock recovery. It will error out again. DONT panic! This is what's supposed to happen.
8. Now, pull your battery.
9. Download the 'True stock 2.1 firmware for the vibrant'.
10. Extract the files.
11. Once again, open Odin, plug in your phone, put into download mode.
12. Load the PIT file into the appropriate area and the .tar in the PDA area.
13. THIS TIME you want to check the 're-partition' box.
14. Now click start, let it finish, and this time your phone will load up just fine! BAM!
im willing to try that ^^ but i can get into download mode i tried every single possible way i been trying for 5 hours and i cant get into download
So, I'll be the first to say it then, please, in the future, post this in the appropriate thread. The Q&A or even General would be more appropriate. ::sigh::
Now with that, have you tried booting into Download mode through ADB?
sorry for putting it in this section, i didnt realize, yes i tried to use ADB since odin and my computer recognizes the phone while the phone is in the vibrant screen and no it wont work through ADB =(
You say your computer recognizes the device. So when you type "adb devices", it displays your device? If so, type "adb reboot download" and you're golden. Otherwise, the method that always worked for me to get into Download mode was:
1) Unplug from USB cable.
2) Power down device and remove battery
3) Hold Vol - and Power simultaneously
4) Insert battery while holding down the above keys.
Post back results.
luigi115007 said:
im willing to try that ^^ but i can get into download mode i tried every single possible way i been trying for 5 hours and i cant get into download
Click to expand...
Click to collapse
I've always been able to get into Download Mode with holding the vol up/down buttons while off and then plugging in the usb cable.
I had same issue and had to use a different usb to micro usb cable then my stock charging cable and it worked to get into download mode
Sent from my SGH-T959 using Tapatalk
I'm not trying to be mean but PLEASE read before posting. This is the developement section, not Q&A.
Pay attention to the part in asterisk
1) Unplug from USB cable.
2) Power down device and remove battery
3) Hold ***Vol UP & DOWN(press in the middle)*** and Power simultaneously
4) Insert battery while holding down the above keys.
Pay attention to the part in asterisk.
It will go into download mode. If you still have issue PM me.
This post needs to be moved to the Q&A or General
MStrawder said:
So, I'll be the first to say it then, please, in the future, post this in the appropriate thread...
Click to expand...
Click to collapse
Agreed moved to Q&A, Please post is the correct section.
In order for me to get into download mode I have to plug my phone in, wait for the charging icon to show up, and them press and hold vol down and power.Keep holding them until out shows up.
Sent from my SGH-T959 using XDA App
BabyBoi.JN said:
I've always been able to get into Download Mode with holding the vol up/down buttons while off and then plugging in the usb cable.
Click to expand...
Click to collapse
I have to hold them after the cable is plugged in, then put my battery in to get it.
DaSmittyman said:
Coming from the bionix thread and Som himself
This is done at your own risk.
1. Download Eugenes 'Froyo that does not brick' file.
2. Extract the files.
3. Open Odin, plug in your phone, then put it into download mode.
4. load the PIT file in appropriate area.
5. load the .tar file in the PDA area.
6. DO NOT check 're-partition'.
7. Click start, let it finish. Your phone will load and reboot into stock recovery. It will error out again. DONT panic! This is what's supposed to happen.
8. Now, pull your battery.
9. Download the 'True stock 2.1 firmware for the vibrant'.
10. Extract the files.
11. Once again, open Odin, plug in your phone, put into download mode.
12. Load the PIT file into the appropriate area and the .tar in the PDA area.
13. THIS TIME you want to check the 're-partition' box.
14. Now click start, let it finish, and this time your phone will load up just fine! BAM!
Click to expand...
Click to collapse
OMG!!!! This Worked!!! Thank you thank you thank you thank you!!!
someone I know has the same issue as the op...so of course I'm in Charge of fixing it..
My question...did this save your data? Or was this a fresh flash?
The person is worried about having lost angry birds data LOL
Sent from my SGH-T959 using XDA App
Level 1
disturkis4u said:
someone I know has the same issue as the op...so of course I'm in Charge of fixing it..
My question...did this save your data? Or was this a fresh flash?
The person is worried about having lost angry birds data LOL
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
by the time that mine was done it was a clean wipe, and I'm guessing that with the re-partition in this method, it's going to be the same for anybody
Related
I googled how to reset my phone back to factory settings and they gave me this link
"[STOCK ROM] Odin3 One-Click Downloader"
(cant link links)
i misread that it was for the captivate, and i went through with all the directions.
now my phone keeps flashing an AT&T bootscreen and i cant get it in recovery mode..
help?
same here... that odin thing isn't working. Im just stuck at the vibrant boot screen. I know how to get into download mode but my pc or ODin doesnt recognize that i have my phone in. it's suppose to light up yellow or something. the tar files and all of that stuff is so confusing.
nevermind, i found the Odin program for the samsung vibrant and re did it.. but i still have BOTH at&t boot screen at the tmobile vibrant boot screen.. anyone know how to get rid of that? it would be much appreciated thanks!
http://forum.xda-developers.com/showthread.php?t=741027
where did u find it.. please share..
Edit: NVM..
stepinmyworld said:
same here... that odin thing isn't working. Im just stuck at the vibrant boot screen. I know how to get into download mode but my pc or ODin doesnt recognize that i have my phone in. it's suppose to light up yellow or something. the tar files and all of that stuff is so confusing.
Click to expand...
Click to collapse
You may have tried this but these are the steps that eventually worked for me.
1. Put your phone in download mode by plugging it in and then holding Vol Up+Down and Power. As SOON as the screen goes black release power but NOT Vol Up+Down.
2. Launch Odin
3. Unplug your phone.
4. Load the pit and pda files into odin.
5. Plug your phone back in. You should now see one of the small blocks turn yellow and show you the com port. If not, something is wrong with your drivers.
6. Click start. If it flashes, great. If it hangs at File analasys then repeat 1-5.
6a. If Odin hangs at cache.rfs then move on to 6b.
6b. Unplug your phone (Odin will say it was removed) and remove the battery. DO NOT SHUT DOWN ODIN!!!!!!
6c. Put the battery back in and plug it back into your computer and put it back into download mode using step 1.
6d. Press start on Odin and it should now flash.
Again, this worked for me, it may have been a fluke and I'm not willing to try it again. Good luck!!!
Does not boot!
What if the phone does not boot. All happened after I tried to flash the kernel back to the stock one. USB plugged in, battery is fully charged- still no sign of life. Any solution for that? No recover or download mode!
setzer715 said:
You may have tried this but these are the steps that eventually worked for me.
1. Put your phone in download mode by plugging it in and then holding Vol Up+Down and Power. As SOON as the screen goes black release power but NOT Vol Up+Down.
2. Launch Odin
3. Unplug your phone.
4. Load the pit and pda files into odin.
5. Plug your phone back in. You should now see one of the small blocks turn yellow and show you the com port. If not, something is wrong with your drivers.
6. Click start. If it flashes, great. If it hangs at File analasys then repeat 1-5.
6a. If Odin hangs at cache.rfs then move on to 6b.
6b. Unplug your phone (Odin will say it was removed) and remove the battery. DO NOT SHUT DOWN ODIN!!!!!!
6c. Put the battery back in and plug it back into your computer and put it back into download mode using step 1.
6d. Press start on Odin and it should now flash.
Again, this worked for me, it may have been a fluke and I'm not willing to try it again. Good luck!!!
Click to expand...
Click to collapse
i am completely lost when it comes to ODIN. I need to know the exact program to use. I have Odin Multi Downloader v4.03.. but it keeps giving me file path error and stuff. I have the right drivers i think because it does recognize my phone. im just so confused with this rar tar stuff. I would pay someone 20 dollars through paypal if they can walk me through this.
stepinmyworld said:
i am completely lost when it comes to ODIN. I need to know the exact program to use. I have Odin Multi Downloader v4.03.. but it keeps giving me file path error and stuff. I have the right drivers i think because it does recognize my phone. im just so confused with this rar tar stuff. I would pay someone 20 dollars through paypal if they can walk me through this.
Click to expand...
Click to collapse
I don't want your money, but if you PM me I will try to type up a detailed how to.
mffu said:
What if the phone does not boot. All happened after I tried to flash the kernel back to the stock one. USB plugged in, battery is fully charged- still no sign of life. Any solution for that? No recover or download mode!
Click to expand...
Click to collapse
What have you done to put it in download mode? You should power off your phone, plug it into your computer. It should then enter the charge mode where you see a picture of your battery being charged (or if you were like me and screwed up somewhere you may see a little picture of a phone, computer and yellow triangle in between them). If you get either of those then press and hold all three VOL up, VOL down and power. AS SOON AS the screen goes black release ONLY Power and it should go into download mode.
If you plug your phone into your computer (powered off) and nothing happens then you just be bricked. Call TMO and play dumb and hopefully get a replacement.
Ok,
The_Chrome_Coyote really helped me!!!! Thank you so much and im back up and running. There was something missing from the original tutorial, not that we should be spoon fed but I didn't have the WinRAR program on my pc and didn't know I needed to extract anything. I was looking for exe. for it to be a program and just open it. It's a little more complicated than that. I added my additions in BOLD
The_Chrome_Coyote's Original post to me:
Odin isnt that hard, its just REALLY picky about working.
Firstly you need to download the Samsung drivers for your OS which can be found:
http://forum.xda-developers.com/showthread.php?t=728929
added:
Second you need to make sure you download WinRAR x86 (32 bit) 3.93 (google it and you should be able to get it) otherwise if your pc doesn't have a program to recognize rar and tar files, you are out of luck.
then read this thread from JAC:
http://forum.xda-developers.com/showthread.php?t=734475
1. Now, Extract ODIN from its .rar and place the .exe on your desktop
2. Extract the .pit file from its.rar and place that on your desktop
3. Place the JFD .tar file on your desktop but DO NOT EXTRACT
Now you can use ODIN
4. Start ODIN Odin3. [Android + SLP], through ODIN select the .pit file
5. Hit "PDA" button, and through ODIN select the .tar file
6. Plug your TURNED OFF PHONE into the USB cable
7. Wait for the Battery/ charging indicator to start
8. HOLD VOL UP+ VOL DOWN+ POWER, as soon as the screen goes black RELEASE POWER, and continue to HOLD VOL UP+ VOL DOWN Until it enters download mode. Which should happen quickly and looks like a men at work highway sign.
9. If a COM port has turned Yellow in ODIN, then the device has been recognized. If it hasnt, unplug and plug your phone back in.
10. Dont select any options other than whats set at default.
11. Hit Start and be patient, takes me maybe 5 minutes to get back up and running.
NOTE: If you do not see a blue progress bar on the phone's screen after a minute;
11a. Turn your phone off by pulling the battery.
11b. CLOSE ODIN
11c. Start at step 4 again.
ODIN needs to be open and ready to flash before the phone is plugged in, in my experience. Its very picking about this, and not everyone has this issue, but I did and following all these steps helped me flash my phone more times than I can count the other day haha.
Hope this helped! and your $20, donate it to Wes, JAC, or Eugene to keep them making great stuff for our phone.
Reply With Quote
Thank you thank you thank you
mffu said:
What if the phone does not boot. All happened after I tried to flash the kernel back to the stock one. USB plugged in, battery is fully charged- still no sign of life. Any solution for that? No recover or download mode!
Click to expand...
Click to collapse
Same thing happened to mine when i tried odin. Now all i get sometime when it come on. are 7 rows of text that seems to be a code on screen in amber. Ishipped back 2 samsung. Since t-mobile won't take it after 14 days.
ok I screwed up guys.
I installed ROM manager from the market, flashed clockwork, it asked me if I wanted to partition and I said yes.
Now I just get a black screen at boot. I've managed to run odin and it says success. But I still just get a black screen after boot.
Little help?
I do have to say that if YOU DO NOT KNOW HOW TO EXTRACT A COMPRESSED FILE (RAR, ZIP,ETC) YOU HAVE NO BUSINESS FLASHING YOU'RE PHONE!! Odin or otherwise.
I am not being mean but at least stick to update.zip files flashed through recovery and make sure you read reviews of other users first, and understand the instructions completely.
Sent from my SGH-T959 using Tapatalk
daddysays said:
I do have to say that if YOU DO NOT KNOW HOW TO EXTRACT A COMPRESSED FILE (RAR, ZIP,ETC) YOU HAVE NO BUSINESS FLASHING YOU'RE PHONE!! Odin or otherwise.
I am not being mean but at least stick to update.zip files flashed through recovery and make sure you read reviews of other users first, and understand the instructions completely.
Sent from my SGH-T959 using Tapatalk
Click to expand...
Click to collapse
First: everyone was a noob at one time, so simmer down.
Second: Pleast post an update.zip that will make my phone work.
Cannot get past Galaxy S boot screen
I was using clockwork recovery installed through an update.zip file on my sd card. everything was working fine for about a day and then when i powered my phone off the next day and powered it back on it would not boot up past the Galaxy S screen. it goes to the Galaxy S screen and then goes blank but my hard keys stay lit up while my lcd is completely blank. I tried using the Odin method described in this thread and it seemed like it was going to work but i still cannot get past the boot screen. please help. willing to donate if needed
jmoney1017 said:
I was using clockwork recovery installed through an update.zip file on my sd card. everything was working fine for about a day and then when i powered my phone off the next day and powered it back on it would not boot up past the Galaxy S screen. it goes to the Galaxy S screen and then goes blank but my hard keys stay lit up while my lcd is completely blank. I tried using the Odin method described in this thread and it seemed like it was going to work but i still cannot get past the boot screen. please help. willing to donate if needed
Click to expand...
Click to collapse
If you can see the samsung logo you are fine. Load up recovery and try a full wipe first. If that fails then you can odin back to stock and root again.
Sent from my SGH-T959 using XDA App
1. If you have questions, there is a q and a forum for this device!!!!!!
2. THIS IS THE DEV PART OF THE FORUM. IE FOR DEVS POSTING STUFF FOR THE PHONE!!!!!
3. Learn how to Google. Not that hard. Example, you don't know what the *.rar extension is. GOOGLE IT!! Google knows everything.
4. If you don't have basic android or computer skills, don't try anything stupid. You do have a chance to brick your phone, even the pros like cyanogen have bricked their phones.
5. Don't offer cash for someone to fix your phone. Keep it in qna and some one will help you. Save your cash for the development that work hard on making these things work.
6. Can a mod please move this thread to qna.
7. THE MOST IMPORTANT THING. USE THE SEARCH FINCTION BUILT ONTO THE FORUMS. IT WILL SAVE YOU TIME AND THEN YOU WILL NOT LOOK LIKE NOOBS THAT JUST GOT THIS PHONE BECAUSE IT HAD AVITAR IN THE BOX!!!!!
Sent from my SGH-T959 using XDA App
cache.fs problem in odin
setzer715 said:
What have you done to put it in download mode? You should power off your phone, plug it into your computer. It should then enter the charge mode where you see a picture of your battery being charged (or if you were like me and screwed up somewhere you may see a little picture of a phone, computer and yellow triangle in between them). If you get either of those then press and hold all three VOL up, VOL down and power. AS SOON AS the screen goes black release ONLY Power and it should go into download mode.
If you plug your phone into your computer (powered off) and nothing happens then you just be bricked. Call TMO and play dumb and hopefully get a replacement.
Click to expand...
Click to collapse
I FOUND A SOLUTION TO THE CACHE.RFS PROBLEM!!
http://www.fractionalphones.com/?p=121
is there anyway to recover from a black screen that only shows a phone, yellow triangle and a computer? i was on the froyo test 3 rom and tried to go back to stock.
Works every time for me ..
nebur562 said:
is there anyway to recover from a black screen that only shows a phone, yellow triangle and a computer? i was on the froyo test 3 rom and tried to go back to stock.
Click to expand...
Click to collapse
1. Unplug USB
2. Pull battery
3. Open Odin
4. Plug in USB
5. Hold down both volume keys (do not let go)
6. While still holding both volume keys put battery in (this should put you in download mode), let go of vol keys
7. Unplug USB wait 5 seconds and Plug USB back in, Odin should then see it
8. Flash whatever you were trying to flash with Odin again
The above steps work for me every time, and I do have a hardware locked vibrant.
doesnt work
king101201 said:
doesnt work
Click to expand...
Click to collapse
Odd, works for me everytime ..
I wish I had more help for you ....
Works great for me as well make sure you are doing it the way he told you make take a few tries
Sent from my SGH-T959 using Tapatalk
This is the correct procedure but I cannot get anything I flash to take. I believe this is because the previous ROM had voodoo and I believe it needs to be disabled. What I can't do is find a way to disable it because I cannot access my internal sd card.
How do you access your internal sd card without a functional OS on your phone??
oo.shady.oo said:
This is the correct procedure but I cannot get anything I flash to take. I believe this is because the previous ROM had voodoo and I believe it needs to be disabled. What I can't do is find a way to disable it because I cannot access my internal sd card.
How do you access your internal sd card without a functional OS on your phone??
Click to expand...
Click to collapse
Did you try these steps yet?
Did You Flash Something Before Disabling Voodoo? 2 Fixes to Help You Out.
So you forgot to disable the voodoo lagfix before you flashed a new rom and now you're getting an error, similar to the one posted below. Even Odin won't allow you to flash back to stock. Well, pay close attention and with some luck, you'll be good as rain...or something like that.
Fix 1:
1. Download Eugenes 'Froyo that does not brick' file.
2. Extract the files.
3. Open Odin, plug in your phone, then put it into download mode.
4. load the PIT file in appropriate area.
5. load the .tar file in the PDA area.
6. DO NOT check 're-partition'.
7. Click start, let it finish. Your phone will load and reboot into stock recovery. It will error out again. DONT panic! This is what's supposed to happen.
8. Now, pull your battery.
9. Download the 'True stock 2.1 firmware for the vibrant'.
10. Extract the files.
11. Once again, open Odin, plug in your phone, put into download mode.
12. Load the PIT file into the appropriate area and the .tar in the PDA area.
13. THIS TIME you want to check the 're-partition' box.
14. Now click start, let it finish, and this time your phone will load up just fine! BAM!
Click to expand...
Click to collapse
silow said:
Did you try these steps yet?
Click to expand...
Click to collapse
Silow, THANK YOU SOOOOO MUCH!!! I panicked for about 8 hours before I found this and 1st attempt, phone boots up perfectly! Thank you for sharing!!
I cant get into download loader mode from the directions from the second post! All I get is some battery icon can someone help me!
Icedorb217 said:
I cant get into download loader mode from the directions from the second post! All I get is some battery icon can someone help me!
Click to expand...
Click to collapse
Remove the battery, select the down volume button while connecting the USB cable. this should get you into downloader mode, (Android with a shovel)
As sad as it is sometimes you just cant get into download nor will your computer see your phone. The only thing you can do is go through tmo tech support and get a replacement phone. This has happened to me a few other ppl
Try this
http://forum.xda-developers.com/showthread.php?t=749413
Doesn't work for me
pfcpt3 said:
Doesn't work for me
Click to expand...
Click to collapse
Have you tried making the usb jig? It has helped a lot of ppl and doesn't cost much to make
watcher64 said:
1. Unplug USB
2. Pull battery
3. Open Odin
4. Plug in USB
5. Hold down both volume keys (do not let go)
6. While still holding both volume keys put battery in (this should put you in download mode), let go of vol keys
7. Unplug USB wait 5 seconds and Plug USB back in, Odin should then see it
8. Flash whatever you were trying to flash with Odin again
The above steps work for me every time, and I do have a hardware locked vibrant.
Click to expand...
Click to collapse
i had the same problem, and these steps worked great for me!!!
I flashed a rom without voodo lagfix disabled so it messed everything so I reflashed the rom and it worked fine at first, everytime it turned off i had to re-flash a rom, so I decided to odin so it would work nomal and after the odin the phone boots then ges to black screen and only the touch buttons light up. I cant even get into recovery mode, only download. The phone just plays a little circle when trying to boot now. Also before I odined I formated the internal memory through setting-sd.. does that make a difference? Someone please help im terrified its a gonner..
Next time, these types of threads belong in Q&A.
Here's the fix I found in the BIonix thread. You were close by trying to use Odin, but you may want to try it in this order
"Did You Flash Something Before Disabling Voodoo? 2 Fixes to Help You Out.
So you forgot to disable the voodoo lagfix before you flashed a new rom and now you're getting an error, similar to the one posted below. Even Odin won't allow you to flash back to stock. Well, pay close attention and with some luck, you'll be good as rain...or something like that.
Fix 1:
1. Download Eugenes 'Froyo that does not brick' file.
2. Extract the files.
3. Open Odin, plug in your phone, then put it into download mode.
4. load the PIT file in appropriate area.
5. load the .tar file in the PDA area.
6. DO NOT check 're-partition'.
7. Click start, let it finish. Your phone will load and reboot into stock recovery. It will error out again. DONT panic! This is what's supposed to happen.
8. Now, pull your battery.
9. Download the 'True stock 2.1 firmware for the vibrant'.
10. Extract the files.
11. Once again, open Odin, plug in your phone, put into download mode.
12. Load the PIT file into the appropriate area and the .tar in the PDA area.
13. THIS TIME you want to check the 're-partition' box.
14. Now click start, let it finish, and this time your phone will load up just fine! BAM!
Fix 2: (use only if you know how to use adb commands)
1. Place the 'disable-lagfix' file in your sdk>tools directory
2. Get into clockwork recovery like you normally would
3. Follow these adb commands to push the 'disable-lagfix' file to you sdcard>voodoo
adb push disable-lagfix /sdcard/voodoo
4. File should now be on your sdcard in your voodoo folder.
5. Reboot phone and with luck, you should hear Linda the robot telling you your file system is being converted back to rfs.
6. Because your system directory has already been wiped, you'll still get a black screen when you reboot, but your file system is back to rfs. Just pull the battery, and reflash whatever rom you want. Then reboot again."
Any of the above files can be found in the Vibrant bible thread.
http://ip208-100-42-21.static.xda-developers.com/showthread.php?t=771111
Uhhh
I did the steps to step 14 and during the proccess the phone turned off and no buttons or anything will work?? ...what do I do?
beckhamsoccerman said:
I did the steps to step 14 and during the proccess the phone turned off and no buttons or anything will work?? ...what do I do?
Click to expand...
Click to collapse
try this
cross your toes cuz this takes almost all your fingers to do!
start odin
plug in your usb
take the sim+ battery + storage out of your phone
with battery out plug in the usb while holding both volume keys
with the volume keys held down put the battery back in should put you back into DL mode hopefully.
backward0 said:
try this
start odin
plug in your usb
take the sim+ battery + storage out of your phone
with battery out plug in the usb while holding both volume keys
with the volume keys held down put the battery back in should put you back into DL mode hopefully.
Click to expand...
Click to collapse
Does it work's ?
My Vibrant is still beside Samsung ... but I aspect, that they will refuse to repair a Vibrant out of US.... >> no words about this one -- international company and they refuse to fix a broken Mobile, because is not from the local market >> IT'S A MOBILE!!! If I received it broken back ( but must pay for nothing , I need to reached the DL Mode. This is the only one, what I haven't try... (Recovery Mode not reachable) DL-Mode - no luck till now
All you need to do is odin stock and if you get the black screen install the last kernel you were running, this happened to me back when I first got my phone using voodoo ocv4, you didn't brick so no worries.
Sent from my SGH-T959 using XDA App
xavyi said:
All you need to do is odin stock and if you get the black screen install the last kernel you were running, this happened to me back when I first got my phone using voodoo ocv4, you didn't brick so no
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
He's not talking about a soft brick if I understand correctly.
Sent from my SGH-T959 using XDA App
Please post questions in the Q&A sub-forum instead of the development sub-forum. This thread has been moved.
Thank you
P.S. I hope you get the issues worked out.
Try the following: Get an odin version of voodoo*** (if you can't find one, it's not too hard to create one, let me know if you need help figuring out how to make one), then flash it. Hopefully from there you can get to the recovery, then adb push the disable lagfix file, then reboot the phone with the disable lagfix file in it until it tells you it's completed, then reodin to a working ROM.
***It's important that you odin in a working VOODOO kernel.
Ok i now Odined True 2.1 stock and it works however every time the phone turns off a little circle just keeps spinning there. and i cant do anything i try putting it into recovery but it goes straight to Download mode.
And it also says usb connected when it's not connected to anything..
I had the same issue with Voodoo, I fixed it flashing Eugenes Froyo that doesn't brick then back to Stock 2.1, Worked wonderfully. Its usually the fix for people that Soft Brick from Voodoo.
http://forum.xda-developers.com/showthread.php?t=740558
Do those steps then flash back to Stock 2.1 afterwards with Odin. Hope this helps.
Thanks ill try when I get home. Ive done the froyo to true 2.1 steps and I still can't restart or it screws everything up and I have to re-odin
beckhamsoccerman said:
Thanks ill try when I get home. Ive done the froyo to true 2.1 steps and I still can't restart or it screws everything up and I have to re-odin
Click to expand...
Click to collapse
Hey so that trick did bring your phone alive again? did i understand the OP correctly? the phone was completely dead, no power no nothing right? im not sure about why the usb port would be doing that.
backward0 said:
Hey so that trick did bring your phone alive again? did i understand the OP correctly? the phone was completely dead, no power no nothing right? im not sure about why the usb port would be doing that.
Click to expand...
Click to collapse
Yeah for a little it was completely broke. I held volume buttons for like 2 minutes straight and it finally went into download mode. I've just got a rom flashed right now and im too scared to turn it off to see if it will work. Every time I do it, i get the little circle thing like its plugged in but it does nothing. Ill just leave it on till I find a solution.. No matter what thing I odin it doesnt fix the circle of death
Hmm. That's strange. Did you check repartition after flashing back from froyo?
Sent from my SGH-T959 using XDA App
Yea I did. No results. It's my buddies vibrant it's not even mine
So, I decided to root my phone and put J16ROM Bionix 1.7 OCUV Voodoo J16. I back up my old ROM just in case. After successfully flashing the new rom, I was really happy with how fast my vibrant became w/o lag. However, I forgot to write down contact info and my password from password safe. So, I was kinda glad that I backed up old ROM. I tried to recover my old rom from ROM manager and thats where my phone gave up on me. It was recovering just fine until it hit data session. It has been there since yesterday and has not moved. I turned it off this morning and it automatically turned back on and went into recovery mode.
So, as of right now, I have access to phone recovery boot menu and clockwork recovery menu. I tried doing the same recovery method but it froze on me at the same exact spot. Did I mess up my phone???
Did you disable Voodoo before you tried to go back to stock?
Sent from my SGH-T959 using XDA App
i would say no, thankfully if you can get to recovery your phone is far from dead, but you should prob flash a stock rom through odin, READ Bionix fix for flashing without disabling voodoo, let me know if you need more info. but you should be alright, remember that your stuff (contacts, etc) are backed up to gmail.
You didn't disable Voodoo before trying to do the restore... did you.
This is the only way to save it now, good luck.
Did You Flash Something Before Disabling Voodoo? 2 Fixes to Help You Out. So you forgot to disable the voodoo lagfix before you flashed a new rom and now you're getting an erro you'll be good as rain...or something like that Fix 1 1. Download Eugenes 'Froyo that does not brick' file. 2. Extract the files. 3. Open Odin, plug in your phone, then put it into download mode. 4. load the PIT file in appropriate area. 5. load the .tar file in the PDA area. 6. DO NOT check 're-partition' 7. Click start, let it finish. Your phone will load and reboot into stock recovery. It will error out again. DO s what's supposed to happen 8. Now, pull your battery. 9. Download the 'True stock 2.1 firmware for the vibrant'. 10. Extract the files. 11. Once again, open Odin, plug in your phone, put into download mode. 12. Load the PIT file into the appropriate area and the .tar in the PDA area. 13. THIS TIME you want to check the 're-partition' box. 14. Now click start, let it finish, and this time your phone will load up just fine! BAM Fix 2: (use only if you know how to use adb commands) 1. Place the 'disable-lagfix' file in your sdk>tools directory 2. Get into clockwork recovery like you normally would 3. Follow these adb commands to push the 'disable-lagfix' file to you sdcard>voodoo adb push disable-lagfix /sdcard/voodoo 4. File should now be on your sdcard in your voodoo folder. 5. Reboot phone and with luck, you should hear Linda the robot telling you your file system is being con rfs 6. Because your system directory has already been wiped, you'll still get a black screen when you reboot system is back to rfs. Just pull the battery, and reflash whatever rom you want. Then reboot again.
Yea I did not disable Voodoo. I thought I would not need to do that since I am going back to original stock. Can you explain it to me how to get back to stock version and how to disable voodoo from recovery mode? Thanks!
read the first page of Bionix thread, it explains everything.
OP this is posted in the wrong section . Belongs in in Q&A .
sorry.. I was panicing and did not know where to post it obviously. One last question, how to get my phone to download mode.
turn phone off, insert usb , wait for battery to start charging, hold down both volume up and down, press power button until screen goes black, then let go of power button but keep holding vol up and down, you'll then see the yellow digger.
kiladubz said:
turn phone off, insert usb , wait for battery to start charging, hold down both volume up and down, press power button until screen goes black, then let go of power button but keep holding vol up and down, you'll then see the yellow digger.
Click to expand...
Click to collapse
Man.. I feel bad to keep asking questions. My computer won't recognize the phone even though my phone is in download mode.
disconnect usb, open Odin, load .pit and .tar, then reconnect usb, com should appear.
I mean Odin won't recognize my phone even though I was following the step
are you using odin 1.0 or 1.3? 1.0 i remember had issues recognizing the device, 1.3 works flawlessly. also, do you have the usb drivers installed? everything can be found in the Vibrant "Bible".
kiladubz said:
are you using odin 1.0 or 1.3? 1.0 i remember had issues recognizing the device, 1.3 works flawlessly. also, do you have the usb drivers installed? everything can be found in the Vibrant "Bible".
Click to expand...
Click to collapse
Thanks I am trying it right now with odin 1.3.
i had to install drivers to get odin 1.3 to recognize the phone, sounds like you need to do the same
Yes, install the samsung drivers, then do odin
Seems like 1.3 is doing the trick for me.. Its going!!!
Man.. I can't seem to download truestock 2.1 firmware for vibrant.. Anyone can upload it for me? Thanks.
yeah i noticed a few days ago that the links were dead, i have it in my downloads.......ok, uploading it now, will provide link when done.
Flash Eugene's Froyo that won't Brick... it will repartition your phone and get rid of everything, including bad kernels... then flash back down to JFD...
Or send your phone to me... $20 bucks since it's a brick...
My phone is stuck at the SAMSUNG boot screen part, it displayed the boot sound but that was it.
I downloaded the wrong phone version of this http://forum.xda-developers.com/showthread.php?t=892297
I can't get back into my phone, is there anyway to restore what I had.
I made a titanium backup and a nandroid backup aswell.
I've made relatively stupid mistake like you. (Not that we are stupid, but Newbie @ this whole phone stuff).
The best way to unbrick the bricked phone is by reinstalling the rom, which will wipe out the data on your phone (but better than having bricked phone eh?)
This step only applies if your phone is "ROOTED"
Follow the instruction in this post
"http://forum.xda-developers.com/showthread.php?t=948679"
If you do exactly what is says you will have your phone back!
If you could, go over this in plain english for me.
I am in download mode but this dosen't make any sence
"and flash modem via Odin. Use pda button"
Ok now I went in the recovery mode and reset factory settings.
was that a bad idea?
Onlyonebowman said:
If you could, go over this in plain english for me.
I am in download mode but this dosen't make any sence
"and flash modem via Odin. Use pda button"
Click to expand...
Click to collapse
You need to download the odin file onto your computer, then get your phone in download mode and open up odin on your computer. Next use pda button to flash the modem file that you downloaded. Sorry, can't give you links as I am not at my computer.
Sent from my SCH-I500 using XDA App
Would doing a factory reset on the phone (via the button method) void any chance of flashing the TW rom?
You are probably still going to have to use ODIN to get your phone back.
Download the 3 files from the link in post #2
Open ODIN on your computer. Pull out battery from phone, hold DOWN VOL and plug phone into USB. Once ODIN recognizes your phone, click PDA and select the modem file and click start.
Once finished, put battery back in, hold UP VOL, DOWN VOL, and power to get into CWR. Select install zip from SDcard, choose zip, scroll down to the correct file and hit the power button to install the ROM.
Do step 2 for the CW package and reboot.
That should get you going.
Harbo99 said:
You are probably still going to have to use ODIN to get your phone back.
Download the 3 files from the link in post #2
Open ODIN on your computer. Pull out battery from phone, hold DOWN VOL and plug phone into USB. Once ODIN recognizes your phone, click PDA and select the modem file and click start.
Once finished, put battery back in, hold UP VOL, DOWN VOL, and power to get into CWR. Select install zip from SDcard, choose zip, scroll down to the correct file and hit the power button to install the ROM.
Do step 2 for the CW package and reboot.
That should get you going.
Click to expand...
Click to collapse
I kniw s/he said it but to clarify on this part make sure you use the PDA button. This is very important. It's very easy to mess that part up if you are still new.
Sent from my SCH-I500 using XDA Premium App
Now I'm having a problem with Odin, it's stuck at the stage that says
<1> setup connection...
it sits here for some time, is there anything I'm doing wrong that would cause this?
Ok guys I fixed it.
For future people reading this thread.
I used Odin v1.3 and the D101.package3.tar.md5 files.
Congratz on your fix. I'm sorry I didnt state how to Unbrick ur phone clearly. I was In hurry .
This method applies to all of the BRICKED phone. Take it from someone who bricked twice and soft brick.
Sent from my SC2.8/EB01 Fascinate using XDA Premium