Related
Hey guys and girls. I have a 8525 and the tip of the stylus broke off my phone while I was trying to remove it. Now the stylus is stuck in the phone and I need assistance in removing it without opening the phone.
Remember only the plastc tip on the end broke off. I tried tweezers but they were too large. Suggestions please.
Try an unfolded paperclip. If you can see the tip but still can't get it out, I would try some superglue on the end of the paperclip and put it on the tip until it sets...
Rif_Luna said:
Try an unfolded paperclip. If you can see the tip but still can't get it out, I would try some superglue on the end of the paperclip and put it on the tip until it sets...
Click to expand...
Click to collapse
I agree that a spot of superglue on the end of something is probably the way. Though personally I'd take the back off to remove it. I think a paperclip might be too thin and a bit hit or miss - but if you are not short of time then maybe you can spend the day fishing for it!!.
Just so we know where it is lodged - it is stuck in the white clip in these pictures (taken from another thread with a slightly different purpose).
http://forum.xda-developers.com/showpost.php?p=1206800&postcount=35
One thing you MUST avoid if you use a spot of superglue on a rod of some sort is hitting the rubber block on the way up the silo. If you touch that with superglue it will stick fast and will likely unstick the block if you try to pull it out again. If you use this technique it would be VITAL to keep the rod you are inserting against the back side of the slot to avoid hitting the rubber block.
Mike
Mike
Okay guys. Thanks for the advice. I'll let you know my results. Also only the tip of the stylus broke so I don't have to worry about the rubber pad. In fact, the rubber pad is what is keeping the stylus in the phone because I could never get a good enough grip to get past it.
Success!
What's up fellas? I have finally went to work and got the stylus removed from my phone. I used a very small screwdriver to slowly pull it out and did not need crazy glue, a safety clip or to take the phone apart.
Thanks for all the assistance. I have included a picture of the stylus so you can see where it broke. The picture is with it extended, but remember it was compact when it was in the phone.
Peace, love and sex!
addicus said:
What's up fellas? I have finally went to work and got the stylus removed from my phone. I used a very small screwdriver to slowly pull it out and did not need crazy glue, a safety clip or to take the phone apart.
Thanks for all the assistance. I have included a picture of the stylus so you can see where it broke. The picture is with it extended, but remember it was compact when it was in the phone.
Peace, love and sex!
Click to expand...
Click to collapse
Well done!
.... and I had misunderstood! I thought it was just the little greyish pointing tip that was stuck in the slot. Obviously the part that came off was at the opposite end. Not that it matters now
Mike
Mine broke like that on my old wizard, and the broken off plastic was still inside the stylus body, so there was nothing to grip. It was still in warranty, and I didnt want to have to send it off, so I had to drill into the stylus, and then stuck a small screwdriver through the hole and worked it out.
jez83uk said:
Mine broke like that on my old wizard, and the broken off plastic was still inside the stylus body, so there was nothing to grip. It was still in warranty, and I didnt want to have to send it off, so I had to drill into the stylus, and then stuck a small screwdriver through the hole and worked it out.
Click to expand...
Click to collapse
Finding a drill long and skinny enough to accomplish that must have been difficult. Granted I also have a Wizard (8125) and the stylus opening is slightly more accessible. I think that is a great option if it occurs again.
this happened to me on the same exact phone.. I used a paperclip and a lighter.. I heated up the paperclip with the lighter then pushed it into the plastic that was left in the broken end in the phone.. waited a few moments for the paperclip to cool down then simply pulled it out.
worked great.
addicus said:
What's up fellas? I have finally went to work and got the stylus removed from my phone. I used a very small screwdriver to slowly pull it out and did not need crazy glue, a safety clip or to take the phone apart.
Thanks for all the assistance. I have included a picture of the stylus so you can see where it broke. The picture is with it extended, but remember it was compact when it was in the phone.
Peace, love and sex!
Click to expand...
Click to collapse
well i guess it a issue ..8525 so i found easy way a toothpick fits righ in and conforms to the shape...
I was searching around and could not find a gel/TPU type clear case for the G1...for those of you who do not know...here is one example of a Nexus One case like what I would want:
http://cgi.ebay.com/2-Soft-Case-TPU...t=LH_DefaultDomain_0&var=&hash=item746a91e417
I know they do not show a completely clear one, but that is the material/type of case I would like. It is not like a typical silicone case -it is slightly like a hard case being that it does not bend as easily and it is not floppy at all.
Any ideas?
Heres the problem that I see...
How would you open the keyboard with that cover overlapping the front of the phone? That would probably be the reason those style covers don't exist for the G1.
As my fellow Oregonian said.. Soft cases and a slide keyboard won't really work.. If you look at the hard shells you'll see how the screen has it's own little part that clips on.. soft shells wrap instead of clip on...
I fail to see why they could not have a separate piece to put on the screen...?
If there is no such case... then could someone recommend a thin, yet tough, hard case? (preferably clear)
soft cases can't clip onto the screen part that has to slide up...
but here's something i found with decent reviews for the other colors.. clear hasn't been rated yet
T-Mobile-Pure-Crystal-Slip-Clear/dp/B002BVMSPG/ref=sr_1_3?ie=UTF8&s=wireless&qid=1274392674&sr=1-3
Kemekill Products said:
soft cases can't clip onto the screen part that has to slide up...
but here's something i found with decent reviews for the other colors.. clear hasn't been rated yet
T-Mobile-Pure-Crystal-Slip-Clear/dp/B002BVMSPG/ref=sr_1_3?ie=UTF8&s=wireless&qid=1274392674&sr=1-3
Click to expand...
Click to collapse
Yeah I understand what you mean and thanks for that info...but - I was thinking not of a soft case 'clipping' onto the screen but you could slip a cover over it or around it -I am SURE there is some way to do it....
I think this is what you are looking for:
http://cgi.ebay.com/Soft-Silicone-S...Accessories&hash=item1c0cb6b513#ht_3496wt_980
SolemnWishing said:
I think this is what you are looking for:
http://cgi.ebay.com/Soft-Silicone-S...Accessories&hash=item1c0cb6b513#ht_3496wt_980
Click to expand...
Click to collapse
LOL WOW THANK YOU!!!! How did you find that ? it should not be labeled as silicone (I think)..... wow that is exactly what I am looking for! I knew it was possible.... any way - I wish it didnt cost so much, the others I see like it(on other phones) is significantly cheaper (like under $5.00 with shipping included).... If I cannot find any cheaper ones I will order that one...
Thanks again, I cant believe you found just what I was looking for...
SolemnWishing said:
I think this is what you are looking for:
QUOTE]
Thank you as well. Been looking for one just like that.
Click to expand...
Click to collapse
yea that case is rocking . I as well was looking for something like this! Thanks!! hey erebusting did you order it? did ya like it?
I ordered the clear one, and it came in yellowish like it was old or like someone was smoking around it or something.... the seller gave me a refund because he said they had no more, but I think that all the clear ones were just as yellow ? who knows....
also when you hold the phone in portrait mode on the top right and left corners of the keyboard section the case left a small gap on each side maybe about 1-2 millimeters as if it was slipping off...
Other than all that I liked it, but would not use it because it makes my phone look yellow / ugly... if I had a case like that with these flaws fixed then I would use it.
erebusting said:
I ordered the clear one, and it came in yellowish like it was old or like someone was smoking around it or something.... the seller gave me a refund because he said they had no more, but I think that all the clear ones were just as yellow ? who knows....
also when you hold the phone in portrait mode on the top right and left corners of the keyboard section the case left a small gap on each side maybe about 1-2 millimeters as if it was slipping off...
Other than all that I liked it, but would not use it because it makes my phone look yellow / ugly... if I had a case like that with these flaws fixed then I would use it.
Click to expand...
Click to collapse
LMAO...Reading this was funny for some reason
Can you post some pictures? And would you recommend it? I am looking for a new case for my phone, and this one is one that I am considering
I had this case. I had a screen protector on, and the extra height of the screen protector made the screen portion of the case slip off. If you don't use a screen protector, it might work for you. I bought a Seidio case and never looked back. Super thin, rugged plastic. Comes in black so it blends into the phone.
zinite said:
I had this case. I had a screen protector on, and the extra height of the screen protector made the screen portion of the case slip off. If you don't use a screen protector, it might work for you. I bought a Seidio case and never looked back. Super thin, rugged plastic. Comes in black so it blends into the phone.
Click to expand...
Click to collapse
zinite, I understand that, but see I do also have a screen protector on but the section of the case which goes on the screen is fitting fine, the section for the body is the part I have the complaint about. I will definately check out some Seidio cases now that you have mentioned that.
SolemnWishing, Here are some pictures of the case next to a clear hard case (which is actually clear and not yellow...)
Ace42, glad you got a laugh! haha...BTW I am wondering why you were laughing though, kind of odd to me ATM...
WOW! that case is really yellow. i was thinking about getting one thinking it wont be that yellow. but that is definitely gross smoker yellow
Dang... it looks like someone left that out in the sun for like a year or something..
Guess you know what happens to these cases when you have em for awhile... I've long given up on G1 cases: with a simple screen protector you should be on your way. I love the feel of the back of the G1, and a case would only screw that up.
mattv888 said:
Guess you know what happens to these cases when you have em for awhile... I've long given up on G1 cases: with a simple screen protector you should be on your way. I love the feel of the back of the G1, and a case would only screw that up.
Click to expand...
Click to collapse
I also love the feelings of the G1 without a case, but I have dropped my previous phones too many times to take that chance... haha
Any ways... Those pictures are from the same day of receiving that case, so it must be some fault on the seller....
its really a disappointment since there are no other cases (that I can find that is) like that for the G1...
any other recommendations/ideas?
Hi I have a question, can you give me the solution?
Look, the other day I dropped the phone, on the asphalt, I have some major bruises on the phone, in the case near the screen saver and power button in each of the four corners of the case and also to finish the play, a peck on the screen protector. The phone still works fine. But I wanted to leave it spotless, because the phone only has 1 month of life. I have found over the network, the OEM case for the x10.
I've been watching the tutorial to remove the phone, but my question is: I have to remove all components of the phone just to change the cover or there is some disassembly system so that it removed the motherboard and the screen to change the case?
I hope I was clear in my question, because my native language is not English.
Greetings and thank you very much in advance
It's definitely not an easy job.
What you should have done is bought a hard gel case/skin for your phone. It saved my phone a few times already. If you do decide to do this, get a case!
Take a look here to see what is involved in disassembly
http://forum.xda-developers.com/showthread.php?t=668132&highlight=upskirt
P.S. The search function works quite well here.
Overall I've really liked my Defender--I just found a "new" feature where the belt clip can stay open for even MORE kickstand options!--but it's a little bulky, the battery is a ***** to remove, and already, even though I've been very careful with the case (barely left the house since I bought it since I've been home studying all day!) there are noticeable white "specks" on the screen and the bottom latch that holds the two plastic pieces together has broken somewhat!
Again, I've loved the protection (though one last thing that bugs me is how the screen protector is cut a hair too low at the top). Think Best Buy will honor the return, no questions asked, etc? I've still got the receipt, box, etc., and it's within the return period (30 days).
Thanks for any advice, including alternate great-protection cases with less bulk and/or easier to take off to do a battery pull!
Panamaniac
PS: the "speck" is out of focus, sorry. There are several like this that I can't seem to remove. Cant even tell if they're on the inside, outside, are a scratch, or what!!
The only complaint I really have is the height of the case next to the screen. It makes hitting those corners on the touchscreen too difficult.
Other than that, I have been pleasantly surprised. I will still probably switch it out when the Kraken II or Ballistic is unleashed.
Yes best buy will let you return it the otterbox defender rip off my invisible shield and best buy was like o sorry and she returned it
yeah the will. I returned mine with some nicks on it and they took no questions asked. I really dont need that much protection right now..once I start my job again then I will pick it up until then im rocking a TPU case and it works amazing. Ive dropped my phone onto my houses doorway edge and nothing was hurt or broken.
Ya touching the sides is difficult at times, and that's been annoying.
Thanks for the info on easy returns, I might do just that...
Snarebum, when you say TPU, I know that refers to a certain material (the fake silicone stuff right), but do you also mean a super-cheap one or what? what case did you get?
they are not super cheap material as far as I can tell..
heres the one I bought and I absolutely love it!
http://www.amazon.com/TPU-Cases-Flexible-Sprint-Retail-Packaging/dp/B0053NWDO0/ref=sr_1_1?ie=UTF8&qid=1310786932&sr=8-1
Im prolly going to get his name wrong but OneStepAhead on here makes them. thats who I ordered mine from.
heres his website: http://tpu-cases.com/index.php?main_page=index&cPath=7
Dear all,
I am here to just warn you of who ever owns a roxfit case, for those who have not stick it on to their phone you might want to reconsider before doing so. And for those who have it on already you might want to reconsider as well.
I bought this case like a month ago and used it for a month. Yes it is a good case "full protection" but when i tried to take it off today i realized the following:
1- it is a PAIN in the ____ to take it off, I am not even kidding. You might think why would you want to take it off? cause one day you want to clean up the dust, take out the sim card, or maybe switch case. I nearly had to break the top left corner, that little thin strand infront of the power button, and find something to stick into the top right.
Yes, i know it might not be the right way to take it off, but I have done some research and it seems like no one knows what is the "proper way" to take it off.
ANYWAY to get to the worst part
2- you know the inside of the case it has the black rectangle thingy with white words on it saying "roxfit?" Well, when i took off the case, i realized a bunch of little tiny black/grey dots on the back of my phone. No, I cannot rub it off, and i also tried erasing it off (which is not a good idea, cause it does rub off the anti-coating and causes it to look shiny which was described in another thread)
I know its just the back cover, but still...
Not trying to complain or anything, just keep your eyes open when choosing your case
LitoNi said:
Dear all,
I am here to just warn you of who ever owns a roxfit case, for those who have not stick it on to their phone you might want to reconsider before doing so. And for those who have it on already you might want to reconsider as well.
I bought this case like a month ago and used it for a month. Yes it is a good case "full protection" but when i tried to take it off today i realized the following:
1- it is a PAIN in the ____ to take it off, I am not even kidding. You might think why would you want to take it off? cause one day you want to clean up the dust, take out the sim card, or maybe switch case. I nearly had to break the top left corner, that little thin strand infront of the power button, and find something to stick into the top right.
Yes, i know it might not be the right way to take it off, but I have done some research and it seems like no one knows what is the "proper way" to take it off.
ANYWAY to get to the worst part
2- you know the inside of the case it has the black rectangle thingy with white words on it saying "roxfit?" Well, when i took off the case, i realized a bunch of little tiny black/grey dots on the back of my phone. No, I cannot rub it off, and i also tried erasing it off (which is not a good idea, cause it does rub off the anti-coating and causes it to look shiny which was described in another thread)
I know its just the back cover, but still...
Not trying to complain or anything, just keep your eyes open when choosing your case
Click to expand...
Click to collapse
I've have 2 of their products for my S, I have the hard shell, which I broke trying to take it off, those little this bits near the switches are a pain and a weak spot. This case had a thin felt patch inside to stop it rubbing the back of my S.
I also have the leather flip over case , i've had to stop using this because unlike the hard shell there is no felt patch inside to stop it rubbing , now I have marks on the back of my phone.
For the money I paid for these items, you'd think a bit more thought would go into the design...
I know, matte coating is not a cool thing, it just feels nice.
i dont know about your XPS but on mine the front bottom part where it says "xperia" that part is also glossy shiny, obviously that part's anti coating is rubbing off just by putting in my pockets.
this is what i am planning to do instead of making the same mistakes again.
the best thing to do is to get the zagg full body kit and protect the [ top, bottom, and the "xperia part" on the front ] and then get a case that only covers the sides and the back.
I had a roxfit and never had such problems.
Sent from my LT26i using Tapatalk 2
Thanks for the warning. In the case thread there was someone saying something about the shell feeling loose. (maybe it was you, dont remember).
I guess thats what you get with a hard shell that covers the phone's back and sides completely unless it was made of two parts or from soft material like TPU. I thought of buying this on long time ago because none of the TPU cases had a good fitt (and the buttons still usable).
I never did buy this one, but thougt about it since it's for me the best next to my TPU preference. I'm using a (little reshaped with hot water) 'Nillkin' TPU case at the moment. I also have a 'Gimmick Five' hard case, but i don't like the edges (like almost all hard cases) , its not smooth when putting it in and getting it out of my pocket for a phone with this size. I also do't think those cases offer much protection.
If you're planning on buying a ZAGG invisibleShield read this too: http://forum.xda-developers.com/showpost.php?p=27896421&postcount=6
and remember this skin is only for scratches not fall damage duh (cases/covers/shells might help a little with low height falls)
---------- Post added at 03:19 PM ---------- Previous post was at 02:57 PM ----------
superlimau said:
I had a roxfit and never had such problems.
Click to expand...
Click to collapse
Can you give us some more info? how is the fit? is it easy to take out? do you have any little scratches of the coating on the edges?
@LitoNi The case is a little flexible, maybe it has also to do with how someone tries to pull of the case?
I took my case many times off. Yeah it's not easy, that's for sure but I can't confirm your other complaints.
My phone slipped once out of my hand and landed on hard ground. I just have a few scratches on the top right corner and bottom left corner.
without the case the damage would have been probably much worse.
The case also was damaged in the bottom.
Currently I'm waiting for my nillkin flip leather case. Hope it will protect the front as well now.
Edit: that is now a little embarrassing. I actually have a krusell case, but the should be the same
I have the roxfit hard shell as well. It fits perfectly and doesn't feel loose at all. As for taking it off, well yeah it's a snug fit, so taking it off requires a bit of fiddling. But it is definitely not impossible to take it off without breaking it. Then again you shouldn't have to take it off daily, so for me it's not a problem.I usually just push the bottom corners of the case down, then you can stick your nail through the hole on the bottom and just push the phone out completely. Not that hard to do.
Also mine does not leave any traces on the phone. I'm pretty happy with this case.
Sent from my LT26i using xda app-developers app
i guess i was just the unlucky one with the stains.
anyway i changed the title so it wont be directly talking about roxfit, but cases in general
taking it out is slightly a pain in the ass... you need to flick it out from the powet button corner follow by volume side... one you flick it past both the 2 buttons, the rest is a breeze...
no there's no stain on the phone....
thanks
Thanks for the warning..
superlimau said:
taking it out is slightly a pain in the ass... you need to flick it out from the powet button corner follow by volume side... one you flick it past both the 2 buttons, the rest is a breeze...
no there's no stain on the phone....
Click to expand...
Click to collapse
i start with the left side and bottom, then top side and last the right side. works everytime
Let me add that there is also a slider shell case: Incipio EDGE Hard Shell Slider Case
But please talk about this on the Xperia S Case show thread and let this thread be only for the Roxfit and Krusell shells :fingers-crossed:
It has done exactly the same to my phone....It's a joke!!!!!