Is there any way to change the carrier name in the notification bar, I've been searching forever and I havn't found anything. I've looked through framework-res.apk with no success. Does anyone know how to do this?
I'm using a HTC tattoo with cyanogenmod 6,
Android 2.2
Check here.
http://forum.xda-developers.com/showthread.php?t=708419
pamplinas said:
Check here.
http://forum.xda-developers.com/showthread.php?t=708419
Click to expand...
Click to collapse
I can't put my phone in diag mode since I have flashed cyanogenmod and diag mode seems to be something for htc.
Solved
Solved it! I edited "/system/etc/spn-conf.xml"
Holabalola said:
Solved it! I edited "/system/etc/spn-conf.xml"
Click to expand...
Click to collapse
excuse me... how did you modify that??
what should I modify to obtain the customed carrier name???
thanks a lot!!!
freakness51 said:
excuse me... how did you modify that??
what should I modify to obtain the customed carrier name???
thanks a lot!!!
Click to expand...
Click to collapse
Here is a link to an app i made that changes your carrier name: http://forum.xda-developers.com/showthread.php?t=901865
It's also available in the market for $0,99.
requires root to work
Holabalola said:
Solved it! I edited "/system/etc/spn-conf.xml"
Click to expand...
Click to collapse
Hello there.
I have an Motorola atrix 4g .
I searched in system and i didn't find that .xml file..
so i cant try what you did, and probably your apk in market wont work..
Any ideas? where to search and find that file?
i 've only found apn settings..
Edit: tried the newest version of the app and doesnt works!
http://forum.xda-developers.com/showpost.php?p=15895403&postcount=5
and you're done
Please use the Q&A Forum for questions Thanks
Moving to Q&A
Related
Hi all,
I have been looking around for long time and trying different solutions to add Arabic (BIDI or RTL) support to my vibrant but with no luck.the only thing is just adding the font so instead of showing squares it shows the letters but disconnected and in reverse order.
Have any one been successful in porting the language support from the i9000 middle eastern rom? I tried but my phone will not boot and I don't know how to access the log at that stage to see why or what is missing.
Do we have a better built in support in froyo? Or it is the same?
I have seen many threads in many forums but most are not active for long time.
Any help will be appreciated.
Sent from my SGH-T959 using XDA App
I managed to make an arabic 2.1 rom. Everything works fine with exception of GPS. Just do not know how to create a flashable zip file for the rom to post it.
arahma said:
I managed to make an arabic 2.1 rom. Everything works fine with exception of GPS. Just do not know how to create a flashable zip file for the rom to post it.
Click to expand...
Click to collapse
How did you do it?
Where did you get the files from? or you compiled your own?
Is it working now right-to-left and reshaping?
I would appreciate your help.
I am running now BIONIX1.6 rom (based on T959UVJI6). what is yours?
I have made a nandroid backup file. I can put it in online.
arahma said:
I have made a nandroid backup file. I can put it in online.
Click to expand...
Click to collapse
Please do i would greatly appreciate it ill even try to make an update from it. My friend would call you a life saver
i need hebrew support for this device 2 im using bionix 1.7 there is a script for fixing the framework.jar but after use with it the phone wont load the homescreen
arahma said:
I have made a nandroid backup file. I can put it in online.
Click to expand...
Click to collapse
That will be awesome, but would you also provide more details about what ROM you are running and what have you done and where did get the update files from.
oror494 said:
i need hebrew support for this device 2 im using bionix 1.7 there is a script for fixing the framework.jar but after use with it the phone wont load the homescreen
Click to expand...
Click to collapse
Can you provide us with that script or show where to get it from? maybe we can update it to work with the new rom.
There is an update rom running froyo 2.2 for Orange (I9000JHJP4) and has support for Arabic and hebrew, i tried to get some files from it to my 2.1 but did not work, i know i am missing more files that should be also integrated. that rom is for the international Galaxy S i9000 so it might not work with Vibrant
you can find the rom at samfirmware.com
windows
http://dl.dropbox.com/u/9085803/Hebrew 0.7/hebfix_script_0.71_win.zip
mac /linux
http://dl.dropbox.com/u/9085803/Hebrew 0.6/hebfix_script_0.64.zip
credit: classicaldude
oror494 said:
windows
http://dl.dropbox.com/u/9085803/Hebrew 0.7/hebfix_script_0.71_win.zip
mac /linux
http://dl.dropbox.com/u/9085803/Hebrew 0.6/hebfix_script_0.64.zip
credit: classicaldude
Click to expand...
Click to collapse
Thanks, i will see if i can fix or update this script. By the way what happens when you run it now? do you get an error or what?
fduraibi said:
Thanks, i will see if i can fix or update this script. By the way what happens when you run it now? do you get an error or what?
Click to expand...
Click to collapse
http://www.multiupload.com/ZBK8NCMTDF
this is the log txt
oror494 said:
http://www.multiupload.com/ZBK8NCMTDF
this is the log txt
Click to expand...
Click to collapse
I tested this patch without any changes and got the same error
I am trying to understand this java disassembled code to be able to fix it for the new ROM.
The patch already cover the full range of unicode characters for hebrew and arabic + other rtl languages.
Can anyone help me with generally understanding the disassembled code or provide links to some resources that can help?
Sent from my SGH-T959 using XDA App
any luck?
.
oror494 said:
any luck?
.
Click to expand...
Click to collapse
nope
there is a lot of line reference shift and i am not sure what or where are these reference and how can i update the new code based on these values.
oror494 said:
any luck?
.
Click to expand...
Click to collapse
Look at this thread, one guy is trying the same thing and he is getting the same error, and i think he got a work around in a hebrew site which i could not understand so you might find the solution to your problem there http://iandroid.co.il/forum/topic5657.html but for me I still need the Arabic character reshaping so RTL alone is not enough
And this is the link to the XDA thread where they discuss the same issues, and it seems that they are about to integrate the BIDI solution into the AOSP and CM
http://forum.xda-developers.com/showthread.php?t=701281
Hi Guys,
Here in South Africa we have DSTV, our Digital Satellite TV. They have a Mobile App for Android on Google Play:
http://apps.dstvmobile.com/decoder
This application works on the following devices, running Android 2.2, 2.3, 3.x and 4.
Play store says this app will work on my phone, and it states its for 2.3. I have the HTC Evo 3D, which i imported. These DSTV developers (so they called) make this app specific to different HTC's, they have a supported phones list and my evo 3D is not on this list. I ave NO idea why they do this as it is Android 2.3??
I REALLY Need someone to unlock this app for the Evo 3D, when i install the app and RUN it, the reads this:
"Your Android Device is not supported by this application" It seems to do a server check before this message check.
Please let me know your thoughts? I know someone here did the previous app when it was still called Decoder.
Thanks guys!
This is the wrong section.
But you can try to edit your build.prop and change the device id to one of the devices that is on the "supported-list"
Flashmaniac said:
This is the wrong section.
But you can try to edit your build.prop and change the device id to one of the devices that is on the "supported-list"
Click to expand...
Click to collapse
I was not sure what section to post this in... any idea? I am not a developer :/
rethan2 said:
I was not sure what section to post this in... any idea? I am not a developer :/
Click to expand...
Click to collapse
of course you are not a developer. That's why you posted it in here.
Q&A would be the correct forum. But as I said, you can try to edit your build.prop and change the device ID
Flashmaniac said:
of course you are not a developer. That's why you posted it in here.
Q&A would be the correct forum. But as I said, you can try to edit your build.prop and change the device ID
Click to expand...
Click to collapse
Thanks for your reply, i don't have a rooted device so i cannot get the APK file or edit the build.prop...
rethan2 said:
Thanks for your reply, i don't have a rooted device so i cannot get the APK file or edit the build.prop...
Click to expand...
Click to collapse
It ain't gonna happen til you root, expecting otherwise is very noobish, root your device and ask again in q&a and il guide you on how to do it
get the apk from somewhere else and install it manually..
Why you dont use "apkoptic" to save the .apk on sd ? I think no Root required...
--- Sorry for my bad english, I'm French. ---
--- Skrived gant va Breizh evo 3D ---
You have to root your device to modify some system files in order to "fake" another device. I remember I faked my Evo3D as a Sensation in order to run some app.
The files in question are build.prop and some other xml (can't remember ).
Or someone could edit the app to not care what device it is? Its been done before..
Sent from my HTC Desire using xda app-developers app
rahditzz said:
Or someone could edit the app to not care what device it is? Its been done before..
Sent from my HTC Desire using xda app-developers app
Click to expand...
Click to collapse
Well i am not rooting my device for various reasons... anyway thanks for the info.
Maybe one day they will add the Evo 3D, till then bleh. If anyone is interested to help me with this app, as in downloading it from Google play, editing it please inbox me
Cheers :/
bzh_info said:
Why you dont use "apkoptic" to save the .apk on sd ? I think no Root required...
--- Sorry for my bad english, I'm French. ---
--- Skrived gant va Breizh evo 3D ---
Click to expand...
Click to collapse
Thanks this worked! Now to edit the apk file and give it a try.
guys, need your help! I do my firmware by jb lq4.
and now the problem: I want to insert your image into the background, I tried to change the image through smart apk tool, but when I tried to put the new framework, I was an eternal loading, let faq to replace the background or make me a framework.
thanks in advance)
I want to here a red background
Hmm...
Can you upload your framework-res.apk?
I will try to edit it
Azmi6298 said:
Hmm...
Can you upload your framework-res.apk?
I will try to edit it
Click to expand...
Click to collapse
Here, take this framework: d-h.st/0cv(please copy it into your browser), because I am a new user and has not yet 10 posts)
Аnd more, you can give me instructions on how to do it, and I want to understand myself and how to change the images) I will be very grateful
rus_koshel said:
Here, take this framework: d-h.st/0cv(please copy it into your browser), because I am a new user and has not yet 10 posts)
Аnd more, you can give me instructions on how to do it, and I want to understand myself and how to change the images) I will be very grateful
Click to expand...
Click to collapse
its something like this.. http://forum.xda-developers.com/showthread.php?t=1478758&highlight=aarun..
that is just the basic..
it is many HOW TO thread to done that..just use the search option..
joehanh88 said:
its something like this.. http://forum.xda-developers.com/showthread.php?t=1478758&highlight=aarun..
that is just the basic..
it is many HOW TO thread to done that..just use the search option..
Click to expand...
Click to collapse
I'm sorry, just looking for information in the subject line of the device, about the global search I didnt think:laugh:
rus_koshel said:
I'm sorry, just looking for information in the subject line of the device, about the global search I didnt think:laugh:
Click to expand...
Click to collapse
LOL..
joehanh88 said:
LOL..
Click to expand...
Click to collapse
I check the link you posted, and tried but failed. What folders do I put the background.png into? Thanks in advance
bobfrantic said:
I check the link you posted, and tried but failed. What folders do I put the background.png into? Thanks in advance
Click to expand...
Click to collapse
try this http://forum.xda-developers.com/showthread.php?t=1811755&page=14..
scroll above..you'll see someone post something about it..
or this http://forum.xda-developers.com/showthread.php?t=1571870..its for ICS..but with some knowledge, you'll know what to do..LOL.. if your background failed, try to use 240x400 png resolution instead of 480x800..
hope this help you..
rus_koshel said:
guys, need your help! I do my firmware by jb lq4.
and now the problem: I want to insert your image into the background, I tried to change the image through smart apk tool, but when I tried to put the new framework, I was an eternal loading, let faq to replace the background or make me a framework.
thanks in advance)
I want to here a red background
Click to expand...
Click to collapse
Here is it
http://d-h.st/2ku
Just flash the zip on CWM
Done
community friends install a rom and root access does not work in it.
says you have to change the binary file to another folder, but as I do? but I have access to the system and the application root checker tells me I have no access
another is not whether to decompile and recompile I have no idea how.
the rom is this: http://forum.xda-developers.com/showthread.php?t=1906446
please help! and sorry for my English.
I erased if something is wrong tell me so I correct.
Greetings from Argentina
Read every word of an OP.
some ppl report root access problems (patch and steps to solve this are at the download section)
quickpanel 2g/3g switch button not working.
Please report any bugs you find. ThanX!
Click to expand...
Click to collapse
XperienceD said:
Read every word of an OP.
Click to expand...
Click to collapse
not worth it since I gave up has important flaws that rom, so if you want to delete this post.
no problem
yes i have seen the post all over the forum, but i didn't figure how to fix the problem. i have a stupid MT6628 mobile phone with android 4.0.4 with kernel version 3.0.13.
i have read somewhere about changing something in the packages.xml file so i attached mine in case anyone would be kind enough to tell me what exactly i have to delete/add/edit/whatever
thank you
oh and yes it is a rooted device
RockyAJ said:
yes i have seen the post all over the forum, but i didn't figure how to fix the problem. i have a stupid MT6628 mobile phone with android 4.0.4 with kernel version 3.0.13.
i have read somewhere about changing something in the packages.xml file so i attached mine in case anyone would be kind enough to tell me what exactly i have to delete/add/edit/whatever
thank you
oh and yes it is a rooted device
Click to expand...
Click to collapse
are you on custom rom?
usually custom roms show that notification
sangalaxy said:
are you on custom rom?
usually custom roms show that notification
Click to expand...
Click to collapse
it is a chinese mobile phone.and i saw a workaround for it,but didn't know how to fix it myself, hence i attached my packages.xml for someone to be generous enough to just tell me what changes i have to make to the file
RockyAJ said:
it is a chinese mobile phone.and i saw a workaround for it,but didn't know how to fix it myself, hence i attached my packages.xml for someone to be generous enough to just tell me what changes i have to make to the file
Click to expand...
Click to collapse
sorry friend Idk to edit the package too
if you are rooted you can try flashing the latest gapps package that should fix this and try fixing permissions
if you are not rooted then wait for someone to edit it for you or do a search and do it yourself
sangalaxy said:
sorry friend Idk to edit the package too
if you are rooted you can try flashing the latest gapps package that should fix this and try fixing permissions
if you are not rooted then wait for someone to edit it for you or do a search and do it yourself
Click to expand...
Click to collapse
i am rooted and i tried flash the gapps but it gave an error.something like wrong package or something...
so no one is kind enough to just do this which would take a practiced one, less than a minute? how sweet