UPDATED: FOUND A FIX! IF THIS WONT WORK I HAVE ANOTHER METHOD BUT ITS QUITE RISKY.
Please rate my thread if it helped
{Disregard my posts asking for help}
This guide is exactly what I did and it was very successful. Please don't blame me if it doesn't work. Keep in mind I did attempt every other option I could think of and this worked. I am not at fault if something goes wrong.
Begin by flashing to stock 2.1 through ODIN and make sure you repartition. Root the stock ROM so you can flash. Then install the latest Froyo by eugene373(you can try a JI6 ROM if you prefer). Now make sure to use a one click root method to re-root (or method of choice).
Download ROM Manager then install clockwork and reboot into it. Do a simple reboot back into your phone from clockwork. Now reboot your phone normally from Froyo ROM. Yes, it is a lot of rebooting, I know!
From here on, the USB saying its on while not plugged in should be fixed - hopefully! The new ROM seems to fix it because the USB settings are a little different..
After is where I think solved the USB problem when the phone isnt booted. Ok, now this is easy. Get back into clockwork, do the following: "Advanced-> Wipe Battery Stats" choose Yes of course. Then just reboot while plugged into USB so phone starts.
It "SHOULD" be fixed at this point!
Unplug from USB and shutdown completely. Now try to start phone without getting the boot looping battery icon. Reboot again to assure this worked for you. If it boots, jump up and down and hope it never happens again. Pull battery a couple times if necessary. This may help if the above failed.
When all is fixed you can install any ROM you wish granted you flash a 2.1 kernel if your not installing another Froyo ROM. Please make sure you understand this.
I only wrote this to help those who have encountered this nasty issue. I really hope it works for you. It is really worth a shot!
If anything was misunderstood, feel free to ask and I will do what I can to help. Ill respond as soon as I get the time.
I think I will make the guide a new thread if its successful. I need feedback. I will also add all download links and fix it up.
Sent from my GT-I9000 using XDA App which made it very difficult to type all of this!
*****FIXED*****
Hi.. I have the same problem. Can you please tell me how you made the USB mode off when the phone is on?
I turned off USB debugging and changed the settings to "Ask on connection" then restart the phone when plugged into your computer.
Sent from my GT-I9000 using XDA App
I also have the same problem... For me going to "Ask on connection" also helped - but USB does not work at all, the connections sign disappears when I plug in USB.
Additionally, I (mostly) could not boot the phone without having USB plugged in.
Yea its horrible having to boot while charging.
Sent from my GT-I9000 using XDA App
Try either flashing a rom with the JI6 update built in or using odin to flash the JI6 update. I talked with tech support and they said the "fix" was supposed to come in the update but if you are like me you didn't get teh update because you are on a third party rom. I found bionix 1.9.1 had the JI6 update in it and flashed it on a list ditch effort before i crushed the phone in frustration and since then i have been free of the USB annoyance. If that doesn't work though, it is a "known defect" and TMO wil replace the phone. You can also just go that route too if you don't want to try flashing all the rom's.
In my case this issue appeared at first after updating... actually thus I am trying to get completely back to stock, trying to fix it that way.
Sending the phone to T-Mobile is difficult since I bought it used on Ebay, isn't it? Or is it realistic to get some help from them?
Sent from my SGH-T959 using XDA App
*EDITED TO REDUCE CLUTTER*
Sent from my GT-I9000 using XDA App
First post now contains my fix. Just another edit to remove my old question.
Sent from my GT-I9000 using XDA App
I finally fixed the issue. After installing Eugenes Froyo port it fixed the USB from staying mounted when the phone is running. Then to fix the problem when the phone is off I booted into clockwork and wiped battery stats. After a reboot or two it was fixed. Dont know if this will work for everyone...post results if you try this. Thanks!
*Detailed guide in first post*
Sent from my GT-I9000 using XDA App
Hi,
Does the Eugene froyo have the JI6 update?
Thanks
B
It uses the JI6 modem but thats about it. You could flash it but in order to restore your JI6 ROM you must also reflash the 2.1 kernel. Read up on it. Its worth it to get rid of the USB problem. Perhaps you could flash Stock through ODIN then update back to JI6 through Kies Mini instead. That way I think would get you back to where you want to be without kernel issues? It may be worth a shot cause the USB problem makes the phone so horrible. Make sure to do a backup of everything you want with Titanium and save any files you want to external SD. Make sure you wipe everything if you do install Froyo cause that is how I did the process. I hope it works for you if you try. Post any questions...
Sent from my GT-I9000 using XDA App
Thanks for the advice!
I will flash the Bionix-Mod, that also has another kernel I think. Yeah and I gonna take care with Voodoo
Updated w/ Solution and hopefully a working fix for others.
It happened to me, but after I flash back to tmobile stock via odin, root, rom manager and flash to bionix final via clockwork(read instalation guide) it's gone.
Sent from my SGH-T959 using XDA App
Yea I suppose any JI6 ROM would work instead of froyo but it wasnt that easy for me. This guide is for who cant make anything else work.
Sent from my GT-I9000 using XDA App
@deez1234
so can you share with us now your vibrant running smothly, power on off without connect usb cable and charger ?
i've same problem, when i turn on phone not powering just show rounds (cercles) turn of (like blinking)
but when i connect usb cable phone show charging so now i press power button, phone turn on,
if i remove usb cable from phone, but when phone fully loaded on desktop show USB IS CONNECTED,
i've spend 3 days for searching solution of my problem but still not luck,
i've follow all your posted procedure, i've flashed successfully froyo also have install rom manager and clockwork but when i try to rebot my phone by rom manager its not work at all, just ask to me wana restart in recovery, but phone not restart, i think rom manager and clockwork not working on 2.2
please suggest me what is need to do next ?
NOTE: my vibrant is brand new just received before 5-6 days, i'm out side of usa that way not able to ask warranty or something
This guide worked perfectly for me. I tried it without partitioning in Odin first (just for a test) and it did not fix it. I then re-Odin'd the phone (following directions with a partition) and it has worked perfectly. I did not reflash a Froyo ROM, I just reflashed Bionox 1.9 and all is well.
Thanks for the fix
I'm glad I could help. And @Ja, are you making sure your rooted cause both ROM manager and clockwork works perfect on 2.2. You can try a JI6 ROM in place of froyo and see if it helps. And yes my Vibrant is as good as new.
Sent from my SGH-T959 using XDA App
Related
I did all that rooting crap. Now when I press the power putton, it flashes the "Samsung Vibrant" Image, then plays the tmobile tone, but no "S" image appears. And it stays black. How do I fix this?
define "all the rooting crap"? Did you flash a Voodoo Rom and try to flash something else on top of it?
There is NO way to tell you what you need to do unless you tell us what you did.
But based on what you have described.. Gonna say u are SOL.
Use odin to flash stock rom then start over. I have been stuck on that screen a couple times. Lol
Sent from my SGH-T959 using XDA App
Truth be told
Anthony is right. i had this issue earlier this week when trying to flash a mod to my phone. Odin is the only choice at this point.
This has happened to me twice, most recently after "fixing permissions" in the oclf market program. Both times I've rectified by booting into recovery and "reinstall packages". Both times I also removed sim and sd and after a couple repetitions of package reinstall it comes back to life. Maybe dumb luck, maybe not, worked twice...
Sent from my SGH-T959 using XDA App
Correction, fixing permissions in Rom Manager...
Sent from my SGH-T959 using XDA App
Also...My Vibrant Wont Turn On
Dear All
I am new to this forum and need some assistance. I recently bought a T-Mobile Vibrant from a friend who had brought it with him for the US. I am using it in the Middle East where I live at the moment.
I have been reading a lot in the past few weeks about the Vibrant and almost everything there is to know. It seems there is always more to discover.
Back to the issue at hand. I had been having problems with getting my phone to reboot into recovery mode but I finally managed to do so last night. I wanted to flash my phone with Axura 2.1E, Nero V2 or the Macnut v14, so I can use the the Black Froyo theme on it.
First, I flashed the original firmware (T959...JDF) which I got off your site, using Odin v1.3. That worked as it should. Then I proceeded to follow instructions to download the ClockworkMod from this thread: [RECOVERY] ClockworkMod Recovery for Vibrant (FINAL! SAFE!)
After I copied the CWM file to the Internal sd card, I downloaded Rom Manager, rooted the phone with Z4root, chose the Samsung Vibrant in Rom manager and clicked install ROM from sd card. it rebooted into recover mode (blue writting), I clicked 'reinstall packages', which it did and it rebooted into the ROM recovery mode (green writting). I chose the option to install zip file from sd card, then chose Axura 2.1E and it installed until it said complete.
So far everything was working as it should, or at least that was the impression I got. I am not sure of this next step. It said installation complete, so i chose 'go back', then 'reboot device'. When it went into reboot, nothing happened...just a black screen. It wont start, neither normally, not into any other mode (recovery or download). i plugged it into the charger and not even the battery icon would come up. i assume that it is...'dead' and I just did the impossible. I tried several ways and combinations to get it back to life somehow, but I have a feeling that's it.
Any suggestions, advice, remedies, whatever help...even condolences would be much appreciated..
Much appreciated and all the best to all.
Cheers
What the heck is up with all these HARD BRICKs?
Past few days, I keep reading people who have appeared to truely HARD BRICK their phone.
Meaning they can not get into download mode, they can not use odin, they are truely hard bricked.
What is up with the sudden surge of hard bricks.
This guy sounds like he did everything correct.
Scary.
Ya I've seen a lot of those also... could it be a newer version of the Vibrant? Yes he did everything correctly... he could try a jig.. its only maybe 10 bucks? worth a try at least...
My Vibrant wont turn on
Thanks guys for the reply to my post. I was thinking today that even though I did follow instructions correctly, that I might have missed a step at the end.
My thoughts went to the fact that after the installation of my chosen ROM (Axura 2.1E) was complete, I was given the choice of installing update.zip again, along with some other ones which I forgot what they were and the option to 'go back'. I went 'back' and pressed reboot device.
If the installation was fully complete, would not the phone go into automatic reboot?
Anyways seem like the boot is screwed and I am getting help from a friend to get it back to life again.
Anyone can confirm what to do after I install a 'ROM' successfully. Is there another step afterwards which I must be aware of to fully complete the flash?
Cheers again
Hey I got a old stock rom from off one of these forms off xda... for my samsung vibrant... After i flash the rom odin said reset and the vibrant never turned on.... its been like this for a day now... the battery sign dosent even turn on... what can i do..
hellobitchdog said:
Hey I got a old stock rom from off one of these forms off xda... for my samsung vibrant... After i flash the rom odin said reset and the vibrant never turned on.... its been like this for a day now... the battery sign dosent even turn on... what can i do..
Click to expand...
Click to collapse
Get into download mode try again,
if not try getting the files from a different source
Sent from my SGH-T959 using XDA App
Sent from my SGH-T959 using XDA App
Hey everyone...
I need help.. And its not my phone nor do i have it in my possession... Kinda troubleshooting over the phone... My nephew got a samsung vibrant... Got his phone rooted and had Darky's v7.7 Gingerbread Edition rom running... It booted up ran for a bit had a LOGSPROVIDER error stopped unexeptedly message....
He shut the phone off then rebooted and it wont boot past the first boot screen... HE also cant get into recovery but download mode works fine..
Possible solutions..?
Well if he can get into download mode the he should just odin back to stock and reinstall the rom!
Sent from my SGH-T959 using XDA App
Thats what I was thinking... Im not familiar with samsung phones.. Whats the purpose of download mode?
Safety feature? I presume..
I find it odd though that it booted fine and was ok until he rebooted and it wouldnt load... Any specific reason that could happen
Nah if you read the disclaimers devs put up it clearly says "i am not responsible for bricking, etc."
So no, there should be no specific reason why your nephews phone won't boot, more unless he was running a lag fix and flashed the wrong zip or whatever then yeah...
But download mode is I guess a fail-safe for samsung if the phone bricks or anything, afterall the vibrant is nearly impossible to fully brick
Sent from my SGH-T959 using XDA App
Thank You for the help...
He opted to call tmo and there sending a replacement.. Then asked him if he bricked the phone... He played dumb.. and said he rebooted the phone and it wouldnt load...
And yes i know about the devs disclosure... Got myself a mytouch slide which just finally got s-off courtesy of ALPHAREV woohoo.. Also have a G1 from back when it first came out.. SO i got plenty of rom downloading under my belt
hellobitchdog said:
Hey I got a old stock rom from off one of these forms off xda... for my samsung vibrant... After i flash the rom odin said reset and the vibrant never turned on.... its been like this for a day now... the battery sign dosent even turn on... what can i do..
Click to expand...
Click to collapse
This same thing happened to me. I read about making a jig, yeah right. So I continued for the better part of three hours plugged into my computer with data cable continuing the same motion that I would to get into download mode. And finally I got the download dude. I used the s1.odin somthing .pit file I think it was the first .pit to come out. Not the 512.pit Along with the first .jar. Anyway keep trying to get into download mode even with a black screen, can be done.
Sent from my SGH-T959 using XDA App
Ok so im tryin to get the new update off of kies but when I plug up says unregistered device. Im runnin nero v3 with DOW and the ka6 modem. How do I make kies work?
Sent from my SGH-T959 using XDA App
You need to use Odin to get back t stock 2.1 first. do a search for odin 2.1 and you will find a thread that will guide you step by step through the process.
Once you are back to stock, then you can hook it back up and run Kies, and you will be offered the update.
heads up your phone needs to be fully charged for kies to start the update so plug it in.
If this helped hit thanks button
Do u no if its worth ypdatin or if I should just flash the ka7 rom?
Sent from my SGH-T959 using XDA App
I hope this is the right place for this question.
Every time I plug my phone in, I get a prompt that says "MiniApplication Launcher Has Stopped Working" and I have to close it out. The farthest I've gotten was having it recognize my phone once, then crash again.
I formatted my SD drives and did everything else I've seen to do. Is there something I'm just missing?
nnk61209 said:
Do u no if its worth ypdatin or if I should just flash the ka7 rom?
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
It is worth it for me only because I bought the Samsung car mount that requires OFFICIAL 2.2 for the audio out on the car mount to function the right way..
Other wise I would stick with Nero 5 with voodoo and Dragon 3.1 kernal
If this helps hit thanks
ok i m on stock rom that came on the phone .never haved flashed any rom .i am rooted for some apps i use but thats it .i am getting the unregistered device ? i don't have usb debugging is not checked any idea's not to thread jack thanks EDIT; ok i just uninstalled kies and the samsung drivers then reinstalled them and it worked im know on 2.2 froyo yaaaaaaaaaaaaaaaaaaaaa
Installed the DoW kernel over Bionix-v and wound up in a boot loop, unable to get into recovery, but I was able to get into download mode. Tried using ODIN to flash back to stock, but it won't boot past the 1st Vibrant splash screen.
The ONLY rom I've been able to boot is Eugene's JK2+2e Froyo ROM, but it's not recognizing both the internal and external storage (shows unavailable). I'm assuming this is due to ODINing with voodoo enabled, so I tried flashing one of SuperCurio's voodoo kernels on top, but that seemed to have no effect.
I've tried using Eugene's Froyo that doesnt brick and then downgrading to stock JFD, but it still refuses to boot, same as if I negated the Froyo step. I'm fairly lost as to what my next step should be besides randomly changing settings, but I dont want to get to a state where I can't enter download mode.
ANY help anyone can provide would be amazing and greatly appreciated, and I can of course provide any additional information that would be helpful.
Odin needs time. Odin is your solution.
Sent from my SGH-T959 using XDA App
Thanks for the response, but could you be more specific? I'm aware that ODIN is the solution, because I'm unable to flash anything in recovery.
torturedsoul802 said:
Thanks for the response, but could you be more specific? I'm aware that ODIN is the solution, because I'm unable to flash anything in recovery.
Click to expand...
Click to collapse
Sure. If it was me id download an older odin version. Just try it. Id also go back to stock.
Remember to back up a program to root.
I still use odin 1.3 myself. Works every single time.
Let me know.
Sent from my SGH-T959 using XDA App
Using Odin 1.7 now, I'll try 1.3 and report back on that. The problem is, every time I attempt to revert back to stock (JFD or JI6), the phone refuses to boot, shows Vibrant splashscreen for ~1.5 sec and then shuts off. No boot animations.
torturedsoul802 said:
Using Odin 1.7 now, I'll try 1.3 and report back on that. The problem is, every time I attempt to revert back to stock (JFD or JI6), the phone refuses to boot, shows Vibrant splashscreen for ~1.5 sec and then shuts off. No boot animations.
Click to expand...
Click to collapse
Keep trying. It will work eventually for no reason.
Sent from my SGH-T959 using XDA App
Leave it alone for at least 5 to 10 min on splash screen. Sometimes that takes a while.
Sent from my SGH-T959 using XDA App
mr.orange303 said:
Leave it alone for at least 5 to 10 min on splash screen. Sometimes that takes a while.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
15 max
Sent from my SGH-T959 using XDA App
Would you recommend flashing Eugene's Froyo that does not brick first and then flashing stock on top? Or straight to flash? And should "re-partition" be checked at any point, since the ext4 system needs to be rebuilt to RFS.
torturedsoul802 said:
Would you recommend flashing Eugene's Froyo that does not brick first and then flashing stock on top? Or straight to flash? And should "re-partition" be checked at any point, since the ext4 system needs to be rebuilt to RFS.
Click to expand...
Click to collapse
No to repartition on my end. But u may want to ask about the ext4 going back to rfs. Ive always done it in cwm honestly.
Someone else with more expirience will have to answer that.
But I have never and read it doesnt need to be done.
Sent from my SGH-T959 using XDA App
Tried, still wont turn on on stock, just vibrant screen.
torturedsoul802 said:
Tried, still wont turn on on stock, just vibrant screen.
Click to expand...
Click to collapse
Its not bricked. Keep trying.
Sent from my SGH-T959 using XDA App
mr.orange303 said:
Its not bricked. Keep trying.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
+1. If your phone boots at all it's in my experience 100% recoverable. I own a RIFF box as well so if you brick it dead then I can still fix it... . I'll be getting a video up on ODIN usage for Vibrant/i9000 owners tomorrow. Check out my Boot Logo video on my website for a little bit of ODIN usage to give you an idea. You just need to open ODIN. The put the phone in download mode and plug in via USB. Then select your PIT and PDA file and click start. Then you can reflash stock firmware. PM me as I offer this as a service as well.
Thanks for the reply. Usage of ODIN is not my problem, the problem is that flashing to JFD (whether I use Eugene's Froyo 1st or not) results in a failed boot. The phone shows the 1st Vibrant splash screen for ~2 sec and then shuts off. No process I have tried results in a successful stock boot.
Thinking about trying both of these:
http://forum.xda-developers.com/showthread.php?t=823300
http://forum.xda-developers.com/showthread.php?t=940671
HOPEFULLY, one of these will let me get into CWM or access the filesystem in order to disable Voodoo.
Once again, if anyone knows of a way to revert EXT4 -> RFS through ADB or download mode, please let me know!
Well I have been working on it for a day straight and no luck. I have talked to several people and the phone has readonly partition now so it is ****ed! Nand death! I called T-Mobile yesterday and told them I have know idea why but my phone won't turn on, blah, blah, blah. So they are going to replace it under warranty and it will be here in a few days.
torturedsoul802 said:
Thinking about trying both of these:
http://forum.xda-developers.com/showthread.php?t=823300
http://forum.xda-developers.com/showthread.php?t=940671
HOPEFULLY, one of these will let me get into CWM or access the filesystem in order to disable Voodoo.
Once again, if anyone knows of a way to revert EXT4 -> RFS through ADB or download mode, please let me know!
Click to expand...
Click to collapse
Hey, thank you so much for posting this up. These are great finds. I'd be more inclined though, to just call Tmobile and get another phone. I'm really tired of messing with the phone. I don't have time to be messing with this anymore.
The fact that I can get into download mode may be good news, but it does nothing for me right now. With what we know about bricking and unbricking phones, I've thrown every trick I know at it already. I hope you get it fixed, but I"m not messing with it anymore.
drewdude007 said:
Well I have been working on it for a day straight and no luck. I have talked to several people and the phone has readonly partition now so it is ****ed! Nand death! I called T-Mobile yesterday and told them I have know idea why but my phone won't turn on, blah, blah, blah. So they are going to replace it under warranty and it will be here in a few days.
Click to expand...
Click to collapse
Yeah man, me too. I'm getting this thing exchanged. It's a paperweight right now. My phone is doing exactly the same thing.
Can you recap one more time? You are only having problems flashing a custom ROM? You said ODIN is not the problem so I'm taking it you could flash back to stock if you wanted to?
Size matters.
Hey, I haven't posted in here before, I've been a member for a while, just never had anything to contribute. So I got the whole soft brick problem. I spent countless hours trying to get into download mode. The size of the usb cable matters, I was using an LG Optimus cord, and my buddy tried his blackberry cord which had much more gerth, and BAM download mode everytime no problem. Maybe this might help some of you out there.
Also I would like to say, thank you for everyones hard work. I had to roll back to stock roms, and just got the Froyo.UVKA7 to work. I love it, it's quick, it's got color in the settings menu. I wanted to cry... Everyone that has ever had anything to do with the developement to make Android better. THANK YOU!
Absolutely,
I am having problems with the phone starting up and loading what I flashed.
I flashed JI5 Ji6, and Eugene's non bricking Froyo Rom
These 3 are the only ones I was able to find that is ODIN flashable
Why you ask?
I cannot get into Recovery, but I can get into Download mode. I can't get into any recovery at all. NOTHING. This is why ODIN seems to be my only option.
But regardless of any ROM i flash, my phone shuts off right after the Vibrant screen. No splash screen, no loading, no booting. .Nothing. It just shuts off.
I can't charge it either.
i get a Charging bootloop. HOurglass - battery shows up for a bit, then restarts over and over.
So in other words. it's ****ed.
Hope that explains it sufficiently. if you have any more questions or suggestions, Im open man, Im open.
Help me
connexion2005 said:
Can you recap one more time? You are only having problems flashing a custom ROM? You said ODIN is not the problem so I'm taking it you could flash back to stock if you wanted to?
Click to expand...
Click to collapse
Long story short is that my fascinate will not sync to the computer through usb. This usually was not a major issue for me until the phone started shutting itself off, and wouldn't power back on without being plugged in. I'm thinking hardware issue. So I need to take the phone in for a warranty exchange, but I have powerwashed on it.
Since I can't odin due to my damaged usb port, is there a cwm-flashable stock rom available that also gets rid of cwm itself?
Sent from my SCH-I500 using XDA App
the entity said:
Long story short is that my fascinate will not sync to the computer through usb. This usually was not a major issue for me until the phone started shutting itself off, and wouldn't power back on without being plugged in. I'm thinking hardware issue. So I need to take the phone in for a warranty exchange, but I have powerwashed on it.
Since I can't odin due to my damaged usb port, is there a cwm-flashable stock rom available that also gets rid of cwm itself?
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
Have you tried the following:
Different battery?
Cleaning the USB port on phone, both ends of cable and PC?
Uninstalling and re installing drivers?
I ask because I don't think you can get back to an official Verizon rom with out Odin, but I don't know for sure.
power washed is ed05 I believe, you may be able to find a stock kernel that is in a .zip file and flash with you're current recovery, reboot and allow the stock kernel to overwrite recovery but i'm not even sure if that's possible??
Sent from my SCH-I500 using XDA App
efan450 said:
Have you tried the following:
Different battery?
Cleaning the USB port on phone, both ends of cable and PC?
Uninstalling and re installing drivers?
I ask because I don't think you can get back to an official Verizon rom with out Odin, but I don't know for sure.
power washed is ed05 I believe, you may be able to find a stock kernel that is in a .zip file and flash with you're current recovery, reboot and allow the stock kernel to overwrite recovery but i'm not even sure if that's possible??
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
Yes, I've had the phone for a bit so I have a bunch of accessories.
different battery, check.
cleaned usb ports, and tried another cable
Drivers on 3 different computers (ubuntu, win xp, and win 7) too.
I haven't had a stock kernel on the phone in a long time, so that's a good idea for recovery.
I'm thinking if I can get an early build of a rom like geewiz(very close to stock) and reinstall the bloatware manually, then un root it, plus do the recovery thing, I can give it The appearance of being stock.
Or I can try to brick it and play stupid.
Sent from my SCH-I500 using XDA App
So just to be sure you've tried hooking up to Odin, putting the phone in download mode and see if you get"com"and a number in the box?
I ask this because I've had my PC(running vista home basic and Odin v 1.7) not see my phone but Odin would still see it and I could still flash...
I would not try to brick it and play stupid..I brought them a fully binged and bloated eb01...not even a official release, when I was having data issues...end result my modem was fried..got a new one free and returned old one with eb01 still on it and never heard a thing from Verizon
Sent from my SCH-I500 using XDA App
Yes I have tried hooking it up in download mode. Windows pops up with a dialog saying that the usb device connected has malfunctioned when in download mode. Never get a com port. When normally booted I can't get the sd card to mount, but it will tether via usb. I've just been using an app called software data cable to transfer files to the phone.
Also ubuntu pc with hemidall gets nothing, but I don't know if that's just from my own stupidity. I've never been able to get that working.
Sent from my SCH-I500 using XDA App
Just as an update, I'm downloading an old, bloated EB01 rom (http://forum.xda-developers.com/showthread.php?t=948943) to see if I can get that stock look. It's deodexed, but i doubt that will make a difference.
Tried the update, and guess what... Not edify compatible. is there anyone out there that can package a cwm 3.0 flashable, fully bloated , fully stock rom?
Sent from my SCH-I500 using XDA App
the entity said:
Tried the update, and guess what... Not edify compatible. is there anyone out there that can package a cwm 3.0 flashable, fully bloated , fully stock rom?
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
Here ya go...edify and amend script support in 1 recovery!...flash this zip with current recovery...select reboot recovery in the cwm menu after it should reboot into the 3-30 fix all recovery...I believe its 2.5.1 but don't quote me, the point is it supports both scripts, then flash the fully bloated rom you have...it should work
http://forum.xda-developers.com/attachment.php?attachmentid=556632&d=1301538910
Sent from my SCH-I500 using XDA App
when my phone entering usb storage mode my pc cannot show the sd card folder in the explorer..anyone can help? im on GeeWiz rom and OTB kernel
Is USB debugging selected in settings, application, development...it should be checked?..also you may have to select mount external storage or whatever it says in the pull down notification bar after you plug in to your PC to get it to recognize it.
And one last thing make sure you have the correct drivers...if you do, try uninstalling and re-installing them
Sent from my SCH-I500 using XDA App
Hey guys... I am not new to using odin, flashing roms, pushing stuff to sd, etc, but I have ran into a problem recently that I can't seem to fix. It doesn't matter what rom I flash and use, I keep getting random shutdowns on my phone, especially after it gets below 20%. Other people using the same roms do not have this trouble.
That being said, most of the time, I odin back to Froyo before flashing a new rom (and yes, I wait about 15 minutes without touching the phone after each flash, do factory reset/wipe, wipe dalvic cache, fix permissions, etc). The Froyo files I use are Eugene's 512.pit file and the JK2.tar file. I finally got to wondering if there was more of a problem with the base files I'm using, so then flashed the listed files using odin (which is what I use to "start fresh" before each new rom) and found out that I am still getting random shutdowns!
I really am not sure what to do... do I need to completely blow everything away (as in doing something that will erase everything - music, photos, etc. which normally doesn't happen), unroot, re-root, and take it from there? Am I using old files that are known not to work so well anymore? Any suggestions?
Try fixing permissions in CWM the wipe dalvac and cache. If that doesn't work try factory reset
Sent from my SGH-T959 using xda premium
i have done all that you listed... do it every time after i flash a new rom but it still shuts down...
When is the last time you calibrated the battery?
I remember someone else having g this issue and its related to the battery percentage. As if the phone thinks its at dead battery when its not.
Sent from my SGH-T959 using xda premium
well, i don't do the full calibration i don't think... what i do is: after i flash a new rom, i charge it all the way up, plug and unplug it a few times to make sure it stays at 100%, then (while it is still plugged in) i reboot into recovery and wipe the battery stats. most of the time that's it, i don't let it charge all the way to 0% and then charge all the way back up again.
but i don't think that's the problem because even when the battery says it is still at 50-75% i still have the problem... albeit not as often.
i'm thinking of usin odin to go back to the un-rooted stock and see if that fixes it... from there i can re-root and flash the rom i want.
Let me know if that works, im interested to see if it works! Good luck.
Sent from my SGH-T959 using xda premium
don't if it will help, but try odening back to jfd. I never odin back to froyo always jfd when I want a fresh start. Try running jfd and see if it still reboots. If so then your phone is defective. Also a while back I remember this happening on simply honey and other gb roms. I forgot what the fix was though.
thanks guys... am in the process of going back to jfd now, sure hope that works! i followed sn15's guide on this and actually reformatted both internal and external card as well to wipe everything. i will keep you all posted if it works...
Could it be a hardware issue? How 'bout on stock, does it still do it? Do you have a case on the phone that it might be pushing the power button down that its causing a forced shutdown? Is the power button getting stuck somehow? Have you tried cleaning the hell out of the contacts (battery & phone) and made sure that the contacts are in fact making a good contact? Luck homie.
Yeah definitely give JFD a shot. Root and reflash. I only really ever use Eugene's JK2 if my partitions get mess up or something. If it's still doing it after that then it could be a hardware issue like someone else said.
just wanted to give an update...
after i flashed JFD my phone was still randomly shutting down some, so i decided to give the battery a shot (as was mentioned above) just to see if that was indeed the issue. i switched batteries from the extended battery i was using back to the stock battery. i reconditioned it in JFD following s15n's advise. i have not had any more issues after this! i believe this worked... thanks for all the advise and help.