Ok so im tryin to get the new update off of kies but when I plug up says unregistered device. Im runnin nero v3 with DOW and the ka6 modem. How do I make kies work?
Sent from my SGH-T959 using XDA App
You need to use Odin to get back t stock 2.1 first. do a search for odin 2.1 and you will find a thread that will guide you step by step through the process.
Once you are back to stock, then you can hook it back up and run Kies, and you will be offered the update.
heads up your phone needs to be fully charged for kies to start the update so plug it in.
If this helped hit thanks button
Do u no if its worth ypdatin or if I should just flash the ka7 rom?
Sent from my SGH-T959 using XDA App
I hope this is the right place for this question.
Every time I plug my phone in, I get a prompt that says "MiniApplication Launcher Has Stopped Working" and I have to close it out. The farthest I've gotten was having it recognize my phone once, then crash again.
I formatted my SD drives and did everything else I've seen to do. Is there something I'm just missing?
nnk61209 said:
Do u no if its worth ypdatin or if I should just flash the ka7 rom?
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
It is worth it for me only because I bought the Samsung car mount that requires OFFICIAL 2.2 for the audio out on the car mount to function the right way..
Other wise I would stick with Nero 5 with voodoo and Dragon 3.1 kernal
If this helps hit thanks
ok i m on stock rom that came on the phone .never haved flashed any rom .i am rooted for some apps i use but thats it .i am getting the unregistered device ? i don't have usb debugging is not checked any idea's not to thread jack thanks EDIT; ok i just uninstalled kies and the samsung drivers then reinstalled them and it worked im know on 2.2 froyo yaaaaaaaaaaaaaaaaaaaaa
Related
My Samsung vibrant thinks it connected to usb when its not connected to anything Also everytime it turns off completely wont boot back up normally, it just shows a little circle spinning like its connected to charge
Did you try powering off then take the battery, simm and sd out, put them back then power back up?
Sent from my SGH-T959 using XDA App
Fraijo11 said:
My Samsung vibrant thinks it connected to usb when its not connected to anything Also everytime it turns off completely wont boot back up normally, it just shows a little circle spinning like its connected to charge
Click to expand...
Click to collapse
Check if you are hardware locked by trying to get into recovery . If you can get into recovery , then i would say backup your apps with titanium , then flash to stock with true stock firmare from here http://forum.xda-developers.com/showthread.php?t=739091 . Use 512pit and tar provided . Dont use Odin v 1.0 use Odin3 v 1.3 .
I have odined my phone and evrything, I've even nandroid it and nothing is seemin to work.
Were you on a custom rom ?
Sent from my SGH-T959 using XDA App
Yeah hybridR3 with voodoo lag fix. Everything messed up when i tried using metamorph
Its probly the voodoo lagfix if you can get adb to work you can push the disable file .
Sent from my SGH-T959 using XDA App
Well ive already disabled the lagfix. But it keeps thinking its connected to usb when its not connected to anything.
Did you try the unbrickable froyo to stock fix ?
Sent from my SGH-T959 using XDA App
Yeah i did i dont know what else to do
Try flashing the stk kernal just the tar in pda section .
Sent from my SGH-T959 using XDA App
UPDATED: FOUND A FIX! IF THIS WONT WORK I HAVE ANOTHER METHOD BUT ITS QUITE RISKY.
Please rate my thread if it helped
{Disregard my posts asking for help}
This guide is exactly what I did and it was very successful. Please don't blame me if it doesn't work. Keep in mind I did attempt every other option I could think of and this worked. I am not at fault if something goes wrong.
Begin by flashing to stock 2.1 through ODIN and make sure you repartition. Root the stock ROM so you can flash. Then install the latest Froyo by eugene373(you can try a JI6 ROM if you prefer). Now make sure to use a one click root method to re-root (or method of choice).
Download ROM Manager then install clockwork and reboot into it. Do a simple reboot back into your phone from clockwork. Now reboot your phone normally from Froyo ROM. Yes, it is a lot of rebooting, I know!
From here on, the USB saying its on while not plugged in should be fixed - hopefully! The new ROM seems to fix it because the USB settings are a little different..
After is where I think solved the USB problem when the phone isnt booted. Ok, now this is easy. Get back into clockwork, do the following: "Advanced-> Wipe Battery Stats" choose Yes of course. Then just reboot while plugged into USB so phone starts.
It "SHOULD" be fixed at this point!
Unplug from USB and shutdown completely. Now try to start phone without getting the boot looping battery icon. Reboot again to assure this worked for you. If it boots, jump up and down and hope it never happens again. Pull battery a couple times if necessary. This may help if the above failed.
When all is fixed you can install any ROM you wish granted you flash a 2.1 kernel if your not installing another Froyo ROM. Please make sure you understand this.
I only wrote this to help those who have encountered this nasty issue. I really hope it works for you. It is really worth a shot!
If anything was misunderstood, feel free to ask and I will do what I can to help. Ill respond as soon as I get the time.
I think I will make the guide a new thread if its successful. I need feedback. I will also add all download links and fix it up.
Sent from my GT-I9000 using XDA App which made it very difficult to type all of this!
*****FIXED*****
Hi.. I have the same problem. Can you please tell me how you made the USB mode off when the phone is on?
I turned off USB debugging and changed the settings to "Ask on connection" then restart the phone when plugged into your computer.
Sent from my GT-I9000 using XDA App
I also have the same problem... For me going to "Ask on connection" also helped - but USB does not work at all, the connections sign disappears when I plug in USB.
Additionally, I (mostly) could not boot the phone without having USB plugged in.
Yea its horrible having to boot while charging.
Sent from my GT-I9000 using XDA App
Try either flashing a rom with the JI6 update built in or using odin to flash the JI6 update. I talked with tech support and they said the "fix" was supposed to come in the update but if you are like me you didn't get teh update because you are on a third party rom. I found bionix 1.9.1 had the JI6 update in it and flashed it on a list ditch effort before i crushed the phone in frustration and since then i have been free of the USB annoyance. If that doesn't work though, it is a "known defect" and TMO wil replace the phone. You can also just go that route too if you don't want to try flashing all the rom's.
In my case this issue appeared at first after updating... actually thus I am trying to get completely back to stock, trying to fix it that way.
Sending the phone to T-Mobile is difficult since I bought it used on Ebay, isn't it? Or is it realistic to get some help from them?
Sent from my SGH-T959 using XDA App
*EDITED TO REDUCE CLUTTER*
Sent from my GT-I9000 using XDA App
First post now contains my fix. Just another edit to remove my old question.
Sent from my GT-I9000 using XDA App
I finally fixed the issue. After installing Eugenes Froyo port it fixed the USB from staying mounted when the phone is running. Then to fix the problem when the phone is off I booted into clockwork and wiped battery stats. After a reboot or two it was fixed. Dont know if this will work for everyone...post results if you try this. Thanks!
*Detailed guide in first post*
Sent from my GT-I9000 using XDA App
Hi,
Does the Eugene froyo have the JI6 update?
Thanks
B
It uses the JI6 modem but thats about it. You could flash it but in order to restore your JI6 ROM you must also reflash the 2.1 kernel. Read up on it. Its worth it to get rid of the USB problem. Perhaps you could flash Stock through ODIN then update back to JI6 through Kies Mini instead. That way I think would get you back to where you want to be without kernel issues? It may be worth a shot cause the USB problem makes the phone so horrible. Make sure to do a backup of everything you want with Titanium and save any files you want to external SD. Make sure you wipe everything if you do install Froyo cause that is how I did the process. I hope it works for you if you try. Post any questions...
Sent from my GT-I9000 using XDA App
Thanks for the advice!
I will flash the Bionix-Mod, that also has another kernel I think. Yeah and I gonna take care with Voodoo
Updated w/ Solution and hopefully a working fix for others.
It happened to me, but after I flash back to tmobile stock via odin, root, rom manager and flash to bionix final via clockwork(read instalation guide) it's gone.
Sent from my SGH-T959 using XDA App
Yea I suppose any JI6 ROM would work instead of froyo but it wasnt that easy for me. This guide is for who cant make anything else work.
Sent from my GT-I9000 using XDA App
@deez1234
so can you share with us now your vibrant running smothly, power on off without connect usb cable and charger ?
i've same problem, when i turn on phone not powering just show rounds (cercles) turn of (like blinking)
but when i connect usb cable phone show charging so now i press power button, phone turn on,
if i remove usb cable from phone, but when phone fully loaded on desktop show USB IS CONNECTED,
i've spend 3 days for searching solution of my problem but still not luck,
i've follow all your posted procedure, i've flashed successfully froyo also have install rom manager and clockwork but when i try to rebot my phone by rom manager its not work at all, just ask to me wana restart in recovery, but phone not restart, i think rom manager and clockwork not working on 2.2
please suggest me what is need to do next ?
NOTE: my vibrant is brand new just received before 5-6 days, i'm out side of usa that way not able to ask warranty or something
This guide worked perfectly for me. I tried it without partitioning in Odin first (just for a test) and it did not fix it. I then re-Odin'd the phone (following directions with a partition) and it has worked perfectly. I did not reflash a Froyo ROM, I just reflashed Bionox 1.9 and all is well.
Thanks for the fix
I'm glad I could help. And @Ja, are you making sure your rooted cause both ROM manager and clockwork works perfect on 2.2. You can try a JI6 ROM in place of froyo and see if it helps. And yes my Vibrant is as good as new.
Sent from my SGH-T959 using XDA App
I have a t-mobile vibrant that I had rooted with Galaxy One Click Root, when the new 2.2 update came out, I unrooted and removed CM, updated via Kies Mini now I keep getting freezes, it says "usb connected" when its not and just keeps looping my desktop, but when I plug the USB cable in it becomes stable, some help will be appreciated as I am about to take my phone back!
Did you already try factory reset?
Sent from my SGH-T959 using XDA App
yes i try everithing, any other advise
Root it back install cwm and install bionix-v or flagship v3. That should correct your issue and these roms are better than stock.
Sent from a Galaxy S far....far....away.
uninstall kies ? lol
Uncheck USB debugging..if it isnt checked, check it and uncheck it and reboot.
ok i will try to do what jbatysmallville says and i put a reply because i already do Uncheck USB debugging. thanks
I did the factory rest but the problem is the same!
I tried the USB debug and it worked everything works but now I have a 10 second lag any ideas?
I have some up of the same problem. It shows the USB icon, even when I do not have it connected. I am unable to put a check for debugging because of this. what can I do to fix this?
hektek2010 said:
I tried the USB debug and it worked everything works but now I have a 10 second lag any ideas?
Click to expand...
Click to collapse
If you're still on Stock 2.2 from Kies, the best thing you can do for yourself if to get rid of it. It's full of crap, just flash a custom 2.2 ROM and you'll be fine. Even that first flash will be a pain just because you're on the sucky 2.2 from Samsung.
roumenjr said:
If you're still on Stock 2.2 from Kies, the best thing you can do for yourself if to get rid of it. It's full of crap, just flash a custom 2.2 ROM and you'll be fine. Even that first flash will be a pain just because you're on the sucky 2.2 from Samsung.
Click to expand...
Click to collapse
I am on a custom ROM, Trigger 2.6.3.
I rooted my galaxy vibrant with superoneclick root.After flashing cynogenmod 7 nightlies,I m stuck on cwm 3...I can't even flash other roms ..help..=[
Sent from my SGH-T959 using XDA App
turn off phone and get into download mode and odin back to stock and if u cant do that then try usb jig.
2 only options
If you are not familiar with using odin, try the "going back to stock" link in my signature.
s15274n said:
If you are not familiar with using odin, try the "going back to stock" link in my signature.
Click to expand...
Click to collapse
After i have return to stock from cm7 nightly will it be 2.1 or 2.2?
Cause its my first time trying to odin my phone ....Thx =/
You'll be on stock JFD meaning 2.1
Abu-7abash said:
You'll be on stock JFD meaning 2.1
Click to expand...
Click to collapse
I saw YouTube that some YouTube video shows that Odin fail when ur hardware is locked.How can I tell if my phone is lock?Btw is there any way to go to 2.2 without rooting it?Thx
P.s Since I'm using superoneclick to root can I just unroot using superoneclick?btw I'm stuck in cm7 nightly 8..Thx very much.=]
Sent from my SGH-T959 using XDA App
nettoxx7 said:
I saw YouTube that some YouTube video shows that Odin fail when ur hardware is locked.How can I tell if my phone is lock?Btw is there any way to go to 2.2 without rooting it?Thx
P.s Since I'm using superoneclick to root can I just unroot using superoneclick?btw I'm stuck in cm7 nightly 8..Thx very much.=]
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
If your hardware is locked then you can't get into download mode and consequently not being able to go to stock. To know if you're hardware locked, take the SD card and SIM off, now insert back the battery while pressing the volume buttons and plugging in the USB cable. This should get you to the yellow download screen.
And yes, you don't have to be rooted to go back to stock 2.2, you can use Odin to and flash JK2.
Oh and yes you can unroot with superoneclick. I think there's an option there next to root if Im not mistaken.
Thx for replying fast.=)um if I use superoneclick to unroot sill it go back to stock 2.1 or cm7 the Tom I'm using nw?sry real noob here..just got my vibrant last week n screwed it.=_=
Is there any other way to downgrade/replace cwm 3 to 2 other then flash to stock?Thx really much.=D
Sent from my SGH-T959 using XDA App
Abu-7abash said:
If your hardware is locked then you can't get into download mode and consequently not being able to go to stock. To know if you're hardware locked, take the SD card and SIM off, now insert back the battery while pressing the volume buttons and plugging in the USB cable. This should get you to the yellow download screen.
And yes, you don't have to be rooted to go back to stock 2.2, you can use Odin to and flash JK2.
Oh and yes you can unroot with superoneclick. I think there's an option there next to root if Im not mistaken.
Click to expand...
Click to collapse
Can u put a link on the latest JK2 file?can't seem to know which is the [email protected]@thx
Oh if my phone is locked what shud I do? Pls thx…=(
Sent from my SGH-T959 using XDA App
nettoxx7 said:
Thx for replying fast.=)um if I use superoneclick to unroot sill it go back to stock 2.1 or cm7 the Tom I'm using nw?sry real noob here..just got my vibrant last week n screwed it.=_=
Is there any other way to downgrade/replace cwm 3 to 2 other then flash to stock?Thx really much.=D
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
No, unrooting doesn't effect your rom/kernel. And no there isn't any other way right now, sadly.
nettoxx7 said:
Can u put a link on the latest JK2 file?can't seem to know which is the [email protected]@thx
Oh if my phone is locked what shud I do? Pls thx…=(
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
Here.
Look for the *** ALT METHOD ***
STOCK JK2 W/ ROOT & RECOVERY.
If I unroot using superonclick I will still be at cm7 not stock?=\
All I did was flash cm7 nightly 1 vibrant from trigger rom and now I'm stuck with this cwm3 problem.=_=Damn.
Is the latest Odin is odin3 very 1.7?Is it save?I'm kinda scared I would brick my new phone..=[
Thx..u have been very helpful.=]
Sent from my SGH-T959 using XDA App
For the thousand times, rooting/unrooting doesn't change whatever rom you're on. Regardless of what that maybe. If you do as per the guide you'll be ok, check the youtube video and do as he does, it aint rocket science.
Besides, JK2 aint called "Froyo that doesn't brick" for nothing
im stuck with the same probelm,
if i'll flash a 2.2 kernel on top will it restore/enable the option to flash other 2.2 roms using clockworkmod?
Abu-7abash said:
For the thousand times, rooting/unrooting doesn't change whatever rom you're on. Regardless of what that maybe. If you do as per the guide you'll be ok, check the youtube video and do as he does, it aint rocket science.
Besides, JK2 aint called "Froyo that doesn't brick" for nothing
Click to expand...
Click to collapse
So now all i have to do is follow S15274n back to stock guide n install Jk2 and I'm ok?THX
Sent from my SGH-T959 using XDA App
Your also stuck on clockworkmod 3?0.0
Sent from my SGH-T959 using XDA App
1. Have a 2.2 rom on your SD card
2. Download the file attached at the end.
3. Put it on your sd card
4. When you get to CWM, click apply update.zip from sd card, you should then find yourself in CWM 2.5.1.2 where you can flash 2.2 roms.
ok so i went from com rom the version b4 this most recent one. to jts cm7. i dodnt install ec09 bc i didnt do my research and was half asleep. now my phone when connected to pc it doesnt recognize my phone and odin doesnt either. i have drivers installed . didnt have this prob last night so i doubt its my cable. i have fascinate drivers installed to be more clear. i read some post saying if i on cm7 i might need to use nexus drivers. i am not sure if that true or not since i have also trie that route. any input or guidance is greatly apprecviated
davzava said:
ok so i went from com rom the version b4 this most recent one. to jts cm7. i dodnt install ec09 bc i didnt do my research and was half asleep. now my phone when connected to pc it doesnt recognize my phone and odin doesnt either. i have drivers installed . didnt have this prob last night so i doubt its my cable. i have fascinate drivers installed to be more clear. i read some post saying if i on cm7 i might need to use nexus drivers. i am not sure if that true or not since i have also trie that route. any input or guidance is greatly apprecviated
Click to expand...
Click to collapse
I'm on cm7 and my pc recognizes my phone...I'm using vista home edition and odin v1.7 I don't know if that matters but my pc at work runs xp pro and I haven't tried to hook up to that one yet..what version of windows are you running??
I'm still on the original drivers I downloaded a year ago when I flashed my first custom rom and I also didn't go to ec09, I came straight from ukb2.1 which was ed01 or ed04...can't remember
Sent from my SCH-I500 using XDA App
I am also on windows7 ...hmm but I using the old Odin 1.3 I guess I need to switch to newr one
Sent from my I500 using XDA App
davzava said:
I am also on windows7 ...hmm but I using the old Odin 1.3 I guess I need to switch to newr one
Sent from my I500 using XDA App
Click to expand...
Click to collapse
Just want to make sure you didn't mis-read it...I'm on vista home, not windows 7...I would think it is more a problem with your pc's current
o.s. more then with your odin version...I'm just trying suggestions just because I'm running the same setup other then windows difference between us, but have never had that problem
Sent from my SCH-I500 using XDA App