[email protected] i flashed my german nike300 several times. the last times especially with rataplans very well done roms. but now, the on-off-standby-button on the top of the cell works strange. right now i flashed the last german stock-rom (2.09xxxx). the cell works as it shout, but if the cell goes for the first time in standby and the display went black, i´m not able to reactivate it by this button. the only possible way to do this, is to slide the hardware-keyboard out. some flashes before, this button works as it should. if i try to reactivate the display after a few seconds been black, it worked with this button, but not, if it spents more time. could it be a software-problem, that comes because of to many flashing? or could it be a hardware-defect? is there any solution? may be a disambley-guide or so?
best regards
kowalskie
Hi buddy, that is bad, it has nothing to do with my roms because you also have a problem with the original, I think your powerswitch is broken and you need to repair it, I have a spare nike with a broken motherboard but the powerbutton is ok, so if you are interested just send me a pm, fyi itś for free
Sorry but thatś all I can do for you.
Regards,
Rataplan said:
Hi buddy, that is bad, it has nothing to do with my roms because you also have a problem with the original, I think your powerswitch is broken and you need to repair it, I have a spare nike with a broken motherboard but the powerbutton is ok, so if you are interested just send me a pm, fyi itś for free
Sorry but thatś all I can do for you.
Regards,
Click to expand...
Click to collapse
@rataplan. hi buddy, it would be great. i´ll send you an pm. thank you very much.
regards
kowalskie
the reason is the flex-cable
[email protected] i figured out, that the damn flex-cable ist the reason for the malfunction of my cell. i´ll try to change ist with a sparepart. i´ll see, if it than works, as it should.
best regards
kowalskie
Related
Hi,
I have 2 Mda1 , and i have to change the displays.
Is there an Howto ,already written for peaple like me, or could somebody give me some help how to do this?
The mdas are already open, i only dont know how to get the display away from the motherboard.(the connectors). And i dont want to make a mistake.
Would be very nice to help me :lol:
and sorry for my bad english, i`ll hope you understand my problem....
Think this answers the question, worked well for me.
http://forum.xda-developers.com/viewtopic.php?t=15622
Hi, thanks it worked well.
But now i`v got the problem that everytime i touch the mda near the sim-card-holder, the mda goes off.
That means, nearly everytime i take the mda in my hands it turns off.
Is it possible, that the Problem ist the small black thing that is in the right down corner in the batteri-cover ?
What is it for?
Thanks
Imilan
There is a small Micro switch there, that should turn off the device when the SIM-Card is released or entered.
I think this causes your trouble...
Stefan
I'm experiencing this too, but not so often [few times at week my MDA turns off just by touching it].
I agree with Stefan that the micro-switch [in polish it has got a beautiful name "krańcówka"] is the cause of this problem.
So far I don't see any solution 'cause this thing is too small to do anything with it without destroying it [or maybe I've got too shaky hands ]
xpq said:
[or maybe I've got too shaky hands ]
Click to expand...
Click to collapse
Maybe drinking some pints of beer before would helg getting smooth hands... ;-)
*SCNR*
Stefan
Yes it is this micro-switch...
but how to solve this problem?
What happens if i will fix this switch with tape?
I think, the only thing is that i have to turn of the mda myself if i change the sim the next time...?
Is this right?
Or could i damage something?
Thanks for your answers!
Imilan said:
What happens if i will fix this switch with tape?
I think, the only thing is that i have to turn of the mda myself if i change the sim the next time...?
Is this right?
Or could i damage something?
Click to expand...
Click to collapse
You could try it.
As you said, you have to remember turning the device off manually when changing the sim....
Stefan
Hi,
Thanks for your answer,
I looked the switch with "Power Knete" some glue- plasticine.
And it is now good.
But now my question:
What means turning of?
Is it only power off?(with the key on the top?)
Hard reset?
or what?
Imilan
i need help please somebody help
ive posted like four times here and one person(the previous owner of my phone replied back, alex3211) reply and he didn't help
can someone help me out? please??
http://forum.xda-developers.com/showthread.php?p=2092553#post2092553
vasilli said:
i need help please somebody help
ive posted like four times here and one person(the previous owner of my phone replied back, alex3211) reply and he didn't help
can someone help me out? please??
http://forum.xda-developers.com/showthread.php?p=2092553#post2092553
Click to expand...
Click to collapse
If flashing back to the original ROM, per alex3211's suggestion, didn't help as you say, then you have a hardware problem. Button's are bad.
Iff there are bad buttons, maybe the flexcabel off the keypad didn't fit? Ore ther is some "dirt" in stake
holmanm said:
If flashing back to the original ROM, per alex3211's suggestion, didn't help as you say, then you have a hardware problem. Button's are bad.
Click to expand...
Click to collapse
ive already replaced the keyboard with a brand new one from an 8125
still the EXACT KEYS wont work?
vasilli said:
ive already replaced the keyboard with a brand new one from an 8125
still the EXACT KEYS wont work?
Click to expand...
Click to collapse
Hmm. than there must be something wrong in the mobo. ;-(
Maybe one chip isnt ok.
I dont think it is the software
... GWES.exe Anyone know what this is all about please and if there is a cure / fix?
This seeme to come up pretty regular when the phone is in hibernation mode and you power it back up yourself. Very strange and pretty odd.
TSS
If you can a port more info that is go be great?
bojan6 said:
If you can a port more info that is go be great?
Click to expand...
Click to collapse
There's not a lot more i can say really mate. The message is as i have said really. White screen, message along the top and then some rubbish about sending to Microsoft, send or don't send. That's it!
I've had this before, from what I gathered on the net it is something to do with the drawing of the graphics on the screen. The advice I found was to simply turn off Windows Error Reporting so that you can ignore it. Its all I did and it worked for me
And if the graphics on the screen look alright to you, then there is no problem anyway!
SteveYorks said:
I've had this before, from what I gathered on the net it is something to do with the drawing of the graphics on the screen. The advice I found was to simply turn off Windows Error Reporting so that you can ignore it. Its all I did and it worked for me
And if the graphics on the screen look alright to you, then there is no problem anyway!
Click to expand...
Click to collapse
That's one solution, yes. However, that it only 'masking' the issue. It'll still remain in the system won't it. All you're doing is like... well, ignoring the fact there is a fault which solves nothing!
Yes, but it's such a minor fault. And after a couple of days of not seeing that annoying message you'll find that you start sleeping well again.
The only other way to get rid of it is to remove recently added programs to see which one caused it, it will only be a minor incompatibility issue.
SteveYorks said:
Yes, but it's such a minor fault. And after a couple of days of not seeing that annoying message you'll find that you start sleeping well again.
The only other way to get rid of it is to remove recently added programs to see which one caused it, it will only be a minor incompatibility issue.
Click to expand...
Click to collapse
That its just see witch recently program you add.
Other solution full reset
bojan6 said:
That its just see witch recently program you add.
Other solution full reset
Click to expand...
Click to collapse
Hard reset will not help. This has done this fault since day 1!
TheShowStopper said:
Hard reset will not help. This has done this fault since day 1!
Click to expand...
Click to collapse
May be is a bug from ROM. Try you to change the ROM? I mean put everything from 0. with other copy of ROM.
I find something. You tried to uncheck "Enable Clear Type"?
bojan6 said:
I find something. You tried to uncheck "Enable Clear Type"?
Click to expand...
Click to collapse
Ok matey. Remember my other thread for keypad
Never had it checked ever mate.
bojan6 said:
May be is a bug from ROM. Try you to change the ROM? I mean put everything from 0. with other copy of ROM.
Click to expand...
Click to collapse
No matey. Not got another rom to try. Wish i had
SteveYorks said:
I've had this before, from what I gathered on the net it is something to do with the drawing of the graphics on the screen. The advice I found was to simply turn off Windows Error Reporting so that you can ignore it. Its all I did and it worked for me
And if the graphics on the screen look alright to you, then there is no problem anyway!
Click to expand...
Click to collapse
how do i turn it off ??
To suppress Error Reporting- go to Start/Settings/System and open Error Reporting, then disable it.
TheShowStopper said:
No matey. Not got another rom to try. Wish i had
Click to expand...
Click to collapse
If it's done this from day one then is does sound like a corrupt ROM. You'll need to either ask for another TG01 under warranty or wait till xda release a ROM.
SteveYorks said:
If it's done this from day one then is does sound like a corrupt ROM. You'll need to either ask for another TG01 under warranty or wait till xda release a ROM.
Click to expand...
Click to collapse
Time to ring Orange and get them to do a diagnostics test then. Now you can see why my patience is wearing thin with this thing! :lol:
TheShowStopper said:
Time to ring Orange and get them to do a diagnostics test then. Now you can see why my patience is wearing thin with this thing! :lol:
Click to expand...
Click to collapse
Results - Orange diagnostics test shows handset as FAULTY based on power test. Replacement arriving tomorrow.
Someone on Orange... do me and yourself a favour... ring 150, option 1, option 3 and tell them from time to time your phone is rebooting every now and then (even if it is not doing this) and could they run a test. I wanna know if they are ALL bugged in some way or another.
The good thing is, if you have any probs with your phone in the future, you can quote them that is was diagnosed as faulty so you have comeback so it's a win-win situation
If you decide to do this and they DO find a fault, great, no problem but if you've personalized your phone, be polite and tell them 'well, i think i'll stick with it another week but you have it on record now anyway eh' and they'll be fine with it.
Honesty eh... damn, what a concept!
Yep, check out my post about GPS problem. Orange said that was a fault and a replacement was sent next day, guess what, I still have the same fault on this one. Hope you have better luck!
SteveYorks said:
Yep, check out my post about GPS problem. Orange said that was a fault and a replacement was sent next day, guess what, I still have the same fault on this one. Hope you have better luck!
Click to expand...
Click to collapse
Ahhh you on about tomtom and it not linking directly to the internal GPS mate cus if so, i can help there. Shout me back dude
Try this
"Start->Settings" , System tab, Screen->ClearType tab, and uncheck the "Enable ClearType.
http://social.msdn.microsoft.com/fo.../thread/b26267d5-27d3-4b95-9c35-c3d9c44d818c/
well... some days ago my touch screen started to tilt.... some times it works, some times it don't...
my cel is an HTC Touch Dual Niki100...
i instaled another roms to correct the problem, but now it don't work anymore... =/
any ideas ???
it might be hardware problem, doesn't it ??
=/ i'm scary about having to change my screen... =/
DarkWz said:
well... some days ago my touch screen started to tilt.... some times it works, some times it don't...
my cel is an HTC Touch Dual Niki100...
i instaled another roms to correct the problem, but now it don't work anymore... =/
any ideas ???
it might be hardware problem, doesn't it ??
=/ i'm scary about having to change my screen... =/
Click to expand...
Click to collapse
I'm afraid it is a hardware problem, it happens to me a couple of days ago, the only solution is to change the motherboard.
Succes,
gee...
that's it then.... i'll see where i can find a tecnical support to do it for me =/
thx for the answer! ^^
Rataplan said:
I'm afraid it is a hardware problem, it happens to me a couple of days ago, the only solution is to change the motherboard.
Succes,
Click to expand...
Click to collapse
Where do you buy these spares rataplan?
DT
d_train said:
Where do you buy these spares rataplan?
DT
Click to expand...
Click to collapse
Hi, that's just the biggest problem, because the imei number is in the motherboard they simply don't sell them, so I bought a second hand phone with a broken screen and made one phone out of two.
Regards
DarkWz said:
that's it then.... i'll see where i can find a tecnical support to do it for me =/
thx for the answer! ^^
Click to expand...
Click to collapse
Here http://www.mikechannon.net/
touch problem
jest jakaś wersja softu bez kalibracji wstępnej ekranu dotykowego? dzienks
hii
i`v got the same problem still unsolved help and i think its a software thing because when u do the alignment screen thing it comes back to normal!
wolero36 said:
jest jakaś wersja softu bez kalibracji wstępnej ekranu dotykowego? dzienks
Click to expand...
Click to collapse
Plse use English, my Polish is really bad , It is possible to pass the bootscreen without calibration but I'm not sure you can find a rom who don't use it.
Sukces
kauazake said:
i`v got the same problem still unsolved help and i think its a software thing because when u do the alignment screen thing it comes back to normal!
Click to expand...
Click to collapse
Can you tell me more about the rom you are using.
It might not bee the mothelboard. Had this problem for a few months until my screen just went black one day!
Had to change the screen cable. It's a design flaw, each time you open the phone the cable gets scratched and soon the wires get clipped. I bought a new niki100 flex cable on ebay and open the phone and replaced it and put a small extra tape over the cable to be sure it would happen again...
problem
there is some version of software without the preliminary calibration of the touch screen of some time I hit on so... perhaps somebody will give bearings... thanks
placing a file name welcome.not on sdcard should bypass the welcome thing
hi, i'm new her.
but i had this problem to.
i bought an touch screen on dealextreme.com
it works great!
sorry for my bad english.
Hi all,
I was wondering if perhaps someone might be able to provide the stock firmware for Lemfo's Lem5? Really like the look and functionality of this Rom and would like to try to port it to another watch.
Thanks
i just got this watch. Amazing piece of hardware. I can do this. in what format you need it?
Timeku said:
i just got this watch. Amazing piece of hardware. I can do this. in what format you need it?
Click to expand...
Click to collapse
Oh. That would be great!
I think if you are able to provide a SPTOOLS flashable package that would be most flexible for me, however if your only able to do TWRP backup that would be fine too.
Thanks a lot. I'll let you know how it goes.
Lem5 Firmware
Timeku said:
i just got this watch. Amazing piece of hardware. I can do this. in what format you need it?
Click to expand...
Click to collapse
Hi there,
Hope your holidays were enjoyable!
Just wanted to touch base to see if you are still able to provide the firmware for the Lem5?
Thanks
Stark_Inc said:
Hi there,
Hope your holidays were enjoyable!
Just wanted to touch base to see if you are still able to provide the firmware for the Lem5?
Thanks
Click to expand...
Click to collapse
Sorry i Dint have the time busy day's christmas etc but i will look into it tonight. I let you know.
Need help with Lemfo Lem5 - keyboard symbols problem
Hello everyone,
I'm new and I hope I'm posting in the right area, I just purchased this with and I think its an amazing watch....however just one little nagging problem. I'm trying to connect to my WiFi at home and when it brings up the keyboard, for the life of me, I cannot find the "@" symbol.
I tried everything from changing keyboards in the input settings and I just can't find it!! Can someone please help or telling what I'm doing wrong?
Thank you all,
Ray
I got the same problem.
Can't use symbols neither writing password, web directions nor user names.
But it's working on adress book...
Any solution?
raycaldwell73 said:
Hello everyone,
I'm new and I hope I'm posting in the right area, I just purchased this with and I think its an amazing watch....however just one little nagging problem. I'm trying to connect to my WiFi at home and when it brings up the keyboard, for the life of me, I cannot find the "@" symbol.
I tried everything from changing keyboards in the input settings and I just can't find it!! Can someone please help or telling what I'm doing wrong?
Thank you all,
Ray
Click to expand...
Click to collapse