Hi,
can someone please help me.
On the sense builds (V3.1, V3.6, EVo v2.2), I cant get any internet connection at all (forget data drops, i havent got ANY connection / 3G)
I can set it up with Wifi, and it ALL runs perfectly.
I have 4 bars reception and can make calls.
if I turn WIFI off and I cant connect to any internet pages. where it should say 3G it has a little G with up and down arrows but can still make calls. On the V3.1 and v3.6 tried to switch to GSM auto as suggested in one thread, made no difference at all.
Am running ROm 3.14 with radio built in 2.15 i think.
check this - if I use an old build like froyostone 2.1 (non-sense) then it can connect to 3g no problem with internet, same ROM / Radio.
hope someone can help. I tried to put this up in the actual build threads and then nobody answers.
thanks
psg
use the search on the andriod threats
There are more post about it and they do explain how to edit your network connections of your phone provider
Related
Hello all,
Well stupid me decided to upgrade my Rogers branded Hermes200 (TtYN) to wm6 without knowing everything I needed to. Installed HardSPL and then the HK English rom.
Phone portion works great
After searching and reading, I found the settings for connecting to the Internet for Rogers. Great.
Tried setting up active synce and it gave me the certificate not vailid error.... installed the cert on the new rom and with the h200 hooked up via usb to the computer it syncs up with my exchange server perfectly.
When I disconnect from the PC, direct push stops working....
When I force a send/receive.... it sits at 'connecting...' for a few minutes and if I'm lucking enough to be watching, it comes back with a 'connection error' message on the status bar before it flips back to number of messages in the inbox display...
The one BIG thing (not sure if it is big) is with the original ROM I'd get a 3G connection with serfing the net, doing data transfers, now I get an H connection, not sure if that is the issue, but it is the only thing I can see right now....
Any suggestions?
obiwan05 said:
The one BIG thing (not sure if it is big) is with the original ROM I'd get a 3G connection with serfing the net, doing data transfers, now I get an H connection, not sure if that is the issue, but it is the only thing I can see right now....
Any suggestions?
Click to expand...
Click to collapse
I can't really comment on the others, but your H vs. 3G issue isn't an issue at all. The fact that your device shows H just means that you have access to Rogers' new Vision network (HSPDA). Cooked ROMs use an H to differentiate HSDPA (3.5 generations technology, faster) from the 3G for UMTS (3rd generation technology, fast but not the fastest). Because HSPDA is an enhancement of UMTS and is built on top of it, a lot of Windows Mobile 5 ROMS (like the stock Rogers ROM) don't differentiate the fact that it's an HSDPA connection, even though it is, and just show a generic "3G". So... rest assured, the H thing is not a bad thing.
i flashed the new 1.6 bamf rom and it works well. i also flashed the new radio and it said that the update was complete and all. the only issue is when i try to enable 4g option i cant get any connection but i can get 3g connection if i enable it to only have 3g. can anyone help me out?
Use the search button
Try a battery pull.
They are constantly working on the network, expect things like this, especially with the recent outage.
Hey, everyone. Using your AMAZING n00b guide and overall lurking of this website for several months since January I've done quite a few awesome things with this phone. Currently I am running Cyanogen Mod 7.1.0-Ba2tF-Olympus (any further information how I got there can be provided if necessary). I'm having a slight issue though. I've noticed that sometimes I'll randomly have no data or cellular service what-so-ever. To gain access to data and cellular service at that point I will then have to restart the phone, wait for it to boot, turn on WiFi, wait for that to connect, use an application like Browser or Facebook to test connectivity, if data transmits then I'm good, then AND ONLY after I go through all that can I disable WiFi and connect through regular data and cellular channels. I was wondering if this has happened to any of you and if anyone had any idea on how to fix it?
If you need clarification I'd be more than happy to try and sort my explanation out for you.
Thank you all in advance and I hope to hear from you soon!
Hello,
Did your APN settings are good ?
You can found it there : Setting / networks / Mobile Networks / Access Point Name.
Where are you from, what is your carrier ?
Regards.
I am thinking you need to flash a new radio.
As a newbie I am at a loss as to how i can resolve a number of issues i have with my flyer so please be gentle .....
My flyer says.it has
Android 3.2.1
HTC Sense 1.1 for tablet
Software Number 3.55.405.1
Kernel 2.6.35.10 Baseband 20.4801.30.0822u_3822.10.08.07_m Build 3.55.405.1 cl205068 releasekeys Browser WebKit 534.13
What I know.....
1. GPS never works, it is always 'searching' but never finds
2. WiFi works OK
3. Mobile HSDPA says Signal strength -75 dBm 18asu at the moment and I do not have a Wifi connection available so i was expecting all my connections would route through mobile connection (as i enabled 'Always on mobile data') but nothing that requires a connection is working ?!
4. I recently accepted an auto update for the OS and now I do not have the Icon target for the Pen even when i use the Pen tutorial !!
I have read the HTC user guide for the Flyer but it does not even come close to explaining how the connectivity works and all i want to be able to do is maintain a connection thru either wifi or GSM at all times yet is seems that even though i have a working SIM in the device (which has credit and says it is connecting) it never works when i don't have wifi. There is also no 'connection overview' page that i can find that tells me what connections are working on my flyer (GPS,wifi,GSM etc) and what strength signal they have !!!!
All advice, help or pointers gladly accepted at this point for any of the above queries
thnx
I am not sure if there is a solution short of gaining s off or HTC dev unlock or rolling back to gingerbread
Flyer
Thnx for the reply
Is how to do any of that detailed in this forum anywhere plz?
If you want to downgrade there is this
http://forum.xda-developers.com/showthread.php?p=26773618
I think either way you will want to gain s off so that you can freely flash roms and hopefully solve your problem. There is risk though.
So if I understand you correctly you have no WiFi and very weak data connection? Has it always been this way?
Flyer
Don't know how to 's off' ? Is that a setting on the Flyer somewhere?
I am sorry I was not specific enough. What I should have said was that the Flyer functions fine on a Wifi connexion as far as i have seen but when there is no Wifi connexion available then i expect it to use the SIM card data connexion (GSM). I had set this option on the flyer under 'Wireless & networks \ Mobile Network Settings
I also do not appear to have anyway to see what connexions are in use for any of the apps or what signal strength is currently available for 'active' connexions
Can you not just go under settings then check wireless and networks? And what was the bit about the pen?
S off is not a setting you just click off, it is the process of unsecuring your bootloader which I do not suggest for you.
Have these problems always been there or are they new? Did you just get the flyer?
Flyer
In the settings that i have it only says 'Turn On' wifi and 'notify when open network is available' but it gives me no idea of the signal strength of any network (wifi or GSM or even GPS)i am connected to so i never know when i am switching betwen wifi or GSM or even which i am using for any app (IE, Weather, SKYPE, etc)
The pen icon was appearing when i first got the flyer but now it does not appear anywhere at any time in any app!! funny thing is it actually works when i use the tutorial up to the point where the tutorial tells you to tap on the pen config icon ... it is not visible !! I think the pen got trashed when i accepted the last update from HTC
GPS never works regardless and i was under the impression that GPS does not need either wifi or GSM to function!!
Yes, i just got the flyer a week ago
This will be a stupid question but you have an active sim in and you are sure it is a 3g model? I would first suggest running the hc ruu for your device which I know you do not know what that means and it may be hard to find
Flyer
Regarding cell network connectivity: If the Flyer was purchased for anyone but your cell carrier, you probably need to manually enter the APN info for your carrier. This is a common mistake by people who buy unlocked phones, etc. from 3rd party sources. Its easily fixed, and much easier than S-Off, RUU, etc. (which won't fix your problem anyway, if its simply caused by missing APN). You can get your carrier's APN info often by just Googling for it, or just call your carrier and ask for it.
You should find the APN info in Settings>Mobile network, or something like that (I have the WiFI-only Flyer, and its also not with me, at the monent).
The missing pen icon is odd. Does the pen do anything if you touch the screen? Make sure the pen still has battery, and try taking the battery out and re-inserting it. Factory reset may also help.
Did not think of the apn angle
Hey, so I have a Samsung Galaxy S running CyanogenMod 9.
I want to test if my 3g is actually working or not. I used to use the 3G internet on the phone until I changed plan without mobile internet and now I've changed back. The problem is there is no 3G connection now.
I've been onto my network's forums and followed their instructions for setting up APN's etc. and the settings are perfect (even though I never changed them since the last time it worked)
So my question is that is there some way to test if your 3G hardware is actually functioning?
Bump. Does anyone know anything to test if your 3G h/w is working?
Bump. Anyone?