As a newbie I am at a loss as to how i can resolve a number of issues i have with my flyer so please be gentle .....
My flyer says.it has
Android 3.2.1
HTC Sense 1.1 for tablet
Software Number 3.55.405.1
Kernel 2.6.35.10 Baseband 20.4801.30.0822u_3822.10.08.07_m Build 3.55.405.1 cl205068 releasekeys Browser WebKit 534.13
What I know.....
1. GPS never works, it is always 'searching' but never finds
2. WiFi works OK
3. Mobile HSDPA says Signal strength -75 dBm 18asu at the moment and I do not have a Wifi connection available so i was expecting all my connections would route through mobile connection (as i enabled 'Always on mobile data') but nothing that requires a connection is working ?!
4. I recently accepted an auto update for the OS and now I do not have the Icon target for the Pen even when i use the Pen tutorial !!
I have read the HTC user guide for the Flyer but it does not even come close to explaining how the connectivity works and all i want to be able to do is maintain a connection thru either wifi or GSM at all times yet is seems that even though i have a working SIM in the device (which has credit and says it is connecting) it never works when i don't have wifi. There is also no 'connection overview' page that i can find that tells me what connections are working on my flyer (GPS,wifi,GSM etc) and what strength signal they have !!!!
All advice, help or pointers gladly accepted at this point for any of the above queries
thnx
I am not sure if there is a solution short of gaining s off or HTC dev unlock or rolling back to gingerbread
Flyer
Thnx for the reply
Is how to do any of that detailed in this forum anywhere plz?
If you want to downgrade there is this
http://forum.xda-developers.com/showthread.php?p=26773618
I think either way you will want to gain s off so that you can freely flash roms and hopefully solve your problem. There is risk though.
So if I understand you correctly you have no WiFi and very weak data connection? Has it always been this way?
Flyer
Don't know how to 's off' ? Is that a setting on the Flyer somewhere?
I am sorry I was not specific enough. What I should have said was that the Flyer functions fine on a Wifi connexion as far as i have seen but when there is no Wifi connexion available then i expect it to use the SIM card data connexion (GSM). I had set this option on the flyer under 'Wireless & networks \ Mobile Network Settings
I also do not appear to have anyway to see what connexions are in use for any of the apps or what signal strength is currently available for 'active' connexions
Can you not just go under settings then check wireless and networks? And what was the bit about the pen?
S off is not a setting you just click off, it is the process of unsecuring your bootloader which I do not suggest for you.
Have these problems always been there or are they new? Did you just get the flyer?
Flyer
In the settings that i have it only says 'Turn On' wifi and 'notify when open network is available' but it gives me no idea of the signal strength of any network (wifi or GSM or even GPS)i am connected to so i never know when i am switching betwen wifi or GSM or even which i am using for any app (IE, Weather, SKYPE, etc)
The pen icon was appearing when i first got the flyer but now it does not appear anywhere at any time in any app!! funny thing is it actually works when i use the tutorial up to the point where the tutorial tells you to tap on the pen config icon ... it is not visible !! I think the pen got trashed when i accepted the last update from HTC
GPS never works regardless and i was under the impression that GPS does not need either wifi or GSM to function!!
Yes, i just got the flyer a week ago
This will be a stupid question but you have an active sim in and you are sure it is a 3g model? I would first suggest running the hc ruu for your device which I know you do not know what that means and it may be hard to find
Flyer
Regarding cell network connectivity: If the Flyer was purchased for anyone but your cell carrier, you probably need to manually enter the APN info for your carrier. This is a common mistake by people who buy unlocked phones, etc. from 3rd party sources. Its easily fixed, and much easier than S-Off, RUU, etc. (which won't fix your problem anyway, if its simply caused by missing APN). You can get your carrier's APN info often by just Googling for it, or just call your carrier and ask for it.
You should find the APN info in Settings>Mobile network, or something like that (I have the WiFI-only Flyer, and its also not with me, at the monent).
The missing pen icon is odd. Does the pen do anything if you touch the screen? Make sure the pen still has battery, and try taking the battery out and re-inserting it. Factory reset may also help.
Did not think of the apn angle
Related
I've been noticing that when I turn on the Wifi switch on my 6800m the EV icon turns into the wifi search antenna, but the wifi radio (maybe saying this wrong) doesn't try and connect to anything (access points, adhoc) I just sits there.
Used to get the "Radar" sound affect and I would be prompted to enter my WPA key, but now it just doesn't do it.
I tried reading the thread, but its up to 55 pages and i just didn't see anything.
I've tried to install a completely rom, just what was provided, and I still cannot get the wifi radio to search for wireless networks to connect to.
Any ideal?
tharris297 said:
I've been noticing that when I turn on the Wifi switch on my 6800m the EV icon turns into the wifi search antenna, but the wifi radio (maybe saying this wrong) doesn't try and connect to anything (access points, adhoc) I just sits there.
Used to get the "Radar" sound affect and I would be prompted to enter my WPA key, but now it just doesn't do it.
I tried reading the thread, but its up to 55 pages and i just didn't see anything.
I've tried to install a completely rom, just what was provided, and I still cannot get the wifi radio to search for wireless networks to connect to.
Any ideal?
Click to expand...
Click to collapse
Try going to the connections settings and choose WiFi.
Make sure the Networks To access tab is set to Only Access Points or All Available.
While on that screen go to Menu and choose the Advanced option.
In this menu check the box that states "Turn On available network notification" and on the scroll menu choose never.
Then on the Network Adapters section make sure that the "My Network Card I connected to " is set to " The Internet " or what ever setting is made on your router.
If that doesn't work try to make sure that your Wireless Router is functioning properly. Like unplugging the power from it for a minute and letting it reset. Or if you have a Linksys router you can search for a Wifi device by pushing the Cisco Systems Button in the from ( If enabled ). This issues a broadcast to all wireless network cards but only the one with the proper key can connect to it.
I noticed that something is a little weird I guess .. besides my reference to Vzw Wife .. typing in the dark is dangerous .. especially with on contact.
Anyway
I don't think my "connections" are correct.
When I go to "Connections" with WIFI off i get
and Look at Network Nanagement I have 3 network options
Verion Wireless, My Work Network, My ISP
I have Verizon Wireless entered for both options.
I do not see "The Internet" or "Work" as options.
When I chose my network adaptor as you stated .. I can see "The Internet" and "Work".
All the other setting were as you said in regards to WIFE andthe network card.
The title of this made me laugh.
I think there is a bigger problem in that when I have the WiFi switch on ... my bluetooth disconnects. I'm going to try one of the older roms and see if it works.
Shouldn't "Internet" and "Work" be visible when I go to Network managment under Connections?
I guess there is something wrong with my phone. I tried NexVision's rom and I could search and connect to my Bluetooth headset with the WIFI switch on, but still cannot search for wifi connections.
show your wife where the router is so she doesnt have to look for it?
(sorry couldnt resist)
could you flash a stock rom and see if wifi works there? its bad news for you but i suspect hardware...
Yep ... I think its hardware also ... and the Wife has no clue what the Router is LOL.
I guess I have a semi Vogue for now.
edit:
I flashed alllll the way back to 2.1.0 and still doesnt work.
I'm downloading the radio for the stock. now and will load the stock verizon rom in a moment. I'll let cha know.
I have alltel and ever since I started using Radio 3.27 my WiFi stopped working (not sure if the radio is the issue). I hear lots of other peoples still work. When I turn the switch to on (with bluetooth off) the circle goes on around the antenna icon and then imediately turns off. I know I have several WiFi routers in the area. The laptop picks them up but the phone does not.
Any vzw users able to use wifi with the new Radio?
Ahh ... Thats interesting.
To be honest ... this is the first time I have attempted to use the wifi since on the new rom. Last nite I was at home and said, I never tested it so I tried and it did not work.
It would make since that the radio could be causing the problem, especially with the radio coming from a beta product if I'm not mistaken. Also that Beta Product being released from another carrier.
Maybe when the Official Verizon Rom is stripped down (or even the pending Sprint Rom Release), us VzW users can use the Wifi, GPS and RevA.
I'm so lazy and just dont wana reloc the bootloader, flash the stock radio, stock rom and be back at such a ... non-robust phone, just for wifi. Right now.
I wonder if any VzW users that are using the new radio and new Radio based roms are able to use wifi?
I have an xv6800 on vzw and everything works perfectly fine, including Wifi, GPS, RevA, MMS etc.
there goes my theory
Yeah that is why I stopped looking for an answer. i hear others peoples work but I have tried all the WM 6.1 roms and none of them work but I put the stock rom in and WiFi works.
Have you tryed changing the power bar for the wifi from best battery to best perforance I used to not beable to pick any thing up untill I did that then once done bam I got all kinds of routers around me. Just a thought
s10onn2o said:
Have you tryed changing the power bar for the wifi from best battery to best perforance I used to not beable to pick any thing up untill I did that then once done bam I got all kinds of routers around me. Just a thought
Click to expand...
Click to collapse
I just changed it, and rebooted and still cannot see our campus Router.
Oh well ... wifi wasn't a need right now ... just flipped the switch to give it a try.
tharris297 said:
I just changed it, and rebooted and still cannot see our campus Router.
Oh well ... wifi wasn't a need right now ... just flipped the switch to give it a try.
Click to expand...
Click to collapse
It seems as if you have a hardware issue. I have the XV6800 with a Custom ROM that enables GPS and Rev A. and it works great for me.
Other then telling you to make sure that your WiFi is searching for all access points instead of computers, I wouldnt know what else could be wrong with your phone. Might as well flash everything to stock and report it so you can get a new one, but it is very weird that it didnt work.
Who knows maybe the access point you are trying to access isn't available
I might just try putting the stock radio on and then re-flashing the 3.27 radio. Maybe it did not flash completely or maybe it got corrupted. Who knows.
Hate to say i think everones right about it being hardware problam
I forgot have you done a hard reset this has fixed alot of peoples problams in the past
I think mine is a drivers issue. I installed WiFiFoFum and it started to pick up AP's. It actually connected to my AP. I did a soft reset and it stopped working again. Not sure why it worked for that 2 minutes.
Edited: As of 3-06-08 I have installed Radio 1.40 and DCD 1.7.0 and I still have this issue. The next step is to put the stock rom back in the phone to see if it is a device issue for me.
Edit #2: Ok I put the stock rom back on the phone and my WiFi still does not work. I am figuring it is a hardware issue now. Looks like I am off to the phone store to get my replacement.
same problem, dont think its hardware...right?
my wifi was working fine VZW with dcd 2.2.6, but since the upgrade to 2.3.x ive been having issues with it. it doesnt connect to my network, or search for networks like it should. sometimes it tries to connect and stays with the wifi icon on and arrows continuously going back and forth, but wheb i tap the icon, all it shows is the cellular data connection as active and no no wifi access point. in the wireless LAN settings it lists my networks as unavailable and wheb i click add new it wont search for ones that i know are around, it just asks me to put in the name of a new one. sometimes i dont even get the flashing arrows back and forth, but just get the antenna without a circle around it.
i cant imagine it being a hardware problem that we are both having since the flash to the new rom. my phone is less than a month old and wifi was working flawlessly until i put on 2.2.3 even had remote desktop over my school network working.
Is it possible to use ICS with wifi connection instead of cellular connection? Would be useful for a makeshift wireless adapter if your regular NIC or wireless NIC fails.
It seems that even if I have a wifi connection already going and then I launch ICS and connect, it still tries to dial out and use the cellular connection. You would think if it can share cellular data it could share wifi data just as easily but maybe im missing something.
Back in the early days of WiFi internet sharing the private interface was changed to WiFi with a manual registry edit. It might be possible to change the public interface to USB instead of defaulting too the cellular radio. It would probably take a fair amount of troubleshooting, but I'd think it would be possible. I think the entries were at HKLM\Comm\ConnectionSharing. Might be a starting point...
Search for WMWifiRouter
WiFiRouter
WiFiRouter works by making your ppc into a virtual access point. Then you can share the internet through it.
Last time I looked however, the author had withdrawn the program from circulation at version 0.91. There must be some problems with it because the author indicated that he would release a new version once he ironed out some bugs. If it is not back in distribution yet, you might be still able to find it on a torrent site. If not, PM me and I will send you the cab. Some of the cab collections at ppcgeeks ftp have it inside too. One good collection to check is Alex's.
I have used it and it works.
-------------------------------------------------------------------
VZW XV6800 Stock 1.30 radio dcd 1.7.0 customized rom. freedom mini keychain gps
Edit/Delete Message
wmwifirouter is not what he's looking for. That is still using your phones internet. He wants to see how he could use the phone as a Network card, using the wifi connection, as oppossed to the sprintpcs connection.
I too would be very interested in this happening, if anyone knows of a way please tell.
ok, but why ??
Why would you actually want to do this anyway ??? I will look into it but it makes no sense when a USB WiFi dongle is $30 or so and does not run your phone down to use it, why would you want to use your phone as a very expensive USB WiFi card ??? Maybe I am missing some golden benefit ????
I dont get it either, but he did say in an emergency if your wifi went out.
Thank you for the responses.
Yes, it would be useful if your wireless nic went out (or regular nic for that matter) just to have something to use for the moment. Or maybe you brought your computer to a friends house and hes out of ports or you dont want to run 50ft cable to his kitchen table
But the titan has wireless, it has internet sharing, why doesnt the wireless show up in the list of available networks? I'm not saying its an all important feature but it would be yet another cool thing your phone could do.
i looking to use my mogul as a wifi access point (sharing Spint Vision thru wifi)
i tryed the procedure to mod the registry to enable it but i cant get it to work.
anyone know the exact procedure for the mogul
btw i also checked out WMWifiRouter...looks like it's no longer free
I also wanna know
Look the idea is simple. So where is the phone ICS telling it to use the celluar line and not allowing the option of the wifi?
Pls any one contact me. Its a cool feature for a phone
Fr3nZy said:
i looking to use my mogul as a wifi access point (sharing Spint Vision thru wifi)
i tryed the procedure to mod the registry to enable it but i cant get it to work.
anyone know the exact procedure for the mogul
btw i also checked out WMWifiRouter...looks like it's no longer free
Click to expand...
Click to collapse
I bought software called Walking Hotspot, which essentially turns my Mogul/Titan into something like a Mifi, sharing my cellular data with my laptop. Otherwise known as tethering.
I only use it for emergencies because I am not sure if Sprint can tell that I am tethering. I believe if Sprint detects unauthorized tethering they will charge 4 cents per kilobyte of data .. which is very harsh!
-----------------------
Jav Atar
This really really pi##es me off, as where I live I get 1x data, & usually use my home wireless (wifi).
Recieved the pro, and activated it. It seems disabled by being activated by alltel. I even stumped the blackberry adept person at the local store enough that they switched out the phone, I walked to next door (motel) used the free wireless (to prove the wireless would even function) then let him activate it and headed home (30+ miles into the wilderness). got home and again I cant get Crap wifi to work.
Home is wireless b, it connects, can be seen on the 'simple' 2 wire wireless appliance but the PRO, will not see or try to send data through it. turned off security and everything on the wireless for testing. I can check, but I know the pass for the motel, and I could try again, but am definitely sure that this AINT the issue--> again the phone wouldnt connect at the motel (least not the pre exchanged one) with me or the rep at Altel either, while it was activated and on alltel.
who to call? Any help out there?
my 6800 will still wifi, at anyplace there is a signal and that I know the passcodes or is open.
yes I asked this, at alltel-howard forums, but would think you guys here know more (on second thought, when I remembered about all the stuff you do here, I know I probably should've posted here 1st, but Im kinda mad at the moment!)
Pretty adept at computers, I do IS as my real job, anything I can do to help trouble shoot? yeah the 6800 has been flashed & I even noobed around with cooking a few time. appreciate any help you guys
i Have a touch pro and a touch diamond, both under 2 weeks old and the wifi works fine with both of them, maybe you should try a custom rom and see if they changes anything. but there is no reason it shouldnt work with the stock rom
goonygugle said:
i Have a touch pro and a touch diamond, both under 2 weeks old and the wifi works fine with both of them, maybe you should try a custom rom and see if they changes anything. but there is no reason it shouldnt work with the stock rom
Click to expand...
Click to collapse
goony,
Is it an Alltel? are you positive that wifi is working, not the "data" connection with alltel towers (cell call)? My proof is that if I goto my basment, I have no cell service so not any data connction, ONLY WIFI (that is where my wireless router is. that is when I found out the 1st time. Everything else looks right, on the phone it says it is connected, on the router I can see it on the connected devices list.
I have my issue that I believe, that it is some setting that Alltel is setting... like I said the phone would connect via wifi until the phone activated. When I activated (full unlimited data package is on this phone) the phone fully rebooted on its own, 3 times as if getting updated via data plan. Im not talking about the 1st time turn on customizations, those were done before I tested the wifi at the motel lobby... For instance, the volume control buttons - the display app were obviously modified, I am not positive what else was.
I'd LOVE to try custom rom, if I wasnt right in the period of time I can get my money back, or not. after that I will...
yes they are alltel, and to test the wifi i just connected it to my router and then turned of my alltel data and it stayed connected so i am positive the wifi works. you can still use a custom rom under your return period, if you want to return just relock it.
I wanted to double check myself sting to make sure i was realy getting wifi, so i connected and went to speedtest.net and did a speed test and sure enough it showed my isp as roadrunner(my home provider). Have you had this problem with multiple phones? are you checking the internet option when it connects? and do you have it diconnected from the pc? my wifi wont work on my diamond hooked to a pc.
Has nothing to do with alltel. Maybe with the rom or the phone. Now I hope you're not waiting for a pop up to show itself on the main screen asking if you want to connect because you could wait forever. Go to comm manager enable wifi/ go to start->settings->connections->wifi and make sure options are set to "all available." If you can even see wireless networks on the list, the wifi is functioning correctly and there is a router settings conflict. If you don't see networks on that list in wifi, then there is a rom/hardware problem.
Sweeny Russ said:
Has nothing to do with alltel. Maybe with the rom or the phone. Now I hope you're not waiting for a pop up to show itself on the main screen asking if you want to connect because you could wait forever. Go to comm manager enable wifi/ go to start->settings->connections->wifi and make sure options are set to "all available." If you can even see wireless networks on the list, the wifi is functioning correctly and there is a router settings conflict. If you don't see networks on that list in wifi, then there is a rom/hardware problem.
Click to expand...
Click to collapse
Hey thanks!
But, it is the Stock shipped rom, I have my HTC 6800 right next to this one, connected and surfing the web, both show up when in the home WIFI router config as connected, yet the pro sends NO DATA to ie or opera, (cant locate any webpages) or any app that uses internet/data.Unless there is something I need to do with PRO that I never had to do with the 6800 (mogul) that I just flashed back to stock shipped rom, ready to sell on ebay...
what I dont know is, well, most of the people wifi to tether a laptop or something, I dont! Sure that will be neat in the future, but RIGHT NOW, Just I use WIFI when I am at home and dont even have signal or evdo near me... (remote locations that I live, the tower coverage sucks out here in ks...) Got to fix this soon, or this Beyotch is going back to alltel.
Another thing, this bad boy pulled this crap, as soon as alltel activated the device (so I could use it as my phone!) when it was NOT activated, the wifi worked (proven at the motel next door to the Alltel store I exchanged this phone). BTW, I was able to test it on the 1st phone shipped to me, while it was activated, it pulled the same thing, when he unactivated the phone, we could almost pickup the wifi from the motel next door (distance was the only issue I think now looking back) but seemed like a chip problem.
Where I got screwed was we believed the wifi to be bad on the 1st phone. So he got out a new phone, and before we activated it, I went and tested the wifi, it worked on the 2nd phone. I thought wall was fine, it worked. then I had him activate it, assuming that proved I will be able to use the wifi. So I leave the store thinking OK wifi works. I get home, and again unable to use my home networking wifi to open web or apps. unacceptable. Yet the 6800 does and still works flawlessly (as long as you slide the wifi sider on side to on {inside joke}).
follw me better now?
What brand router do you have? How many devices are wireless? And it connects to other locations but are you sending and recieving data? Try this link http://www.wmwifirouter.com/trial/ and install on 6800 if you are not normally around hotspots. This will test the t-pro's ability to send and recieve information via wifi. Now it is sounding like an IP address conflict.
Sweeny Russ said:
What brand router do you have? How many devices are wireless? And it connects to other locations but are you sending and recieving data? Try this link http://www.wmwifirouter.com/trial/ and install on 6800 if you are not normally around hotspots. This will test the t-pro's ability to send and recieve information via wifi. Now it is sounding like an IP address conflict.
Click to expand...
Click to collapse
Sweeny, Im in the houshold router (made by 2wire) I can see it (the Pro as well as the 6800) each get an ip. (I work In IT, so I know what you are talking about in ip conflicts, all that.) I have even set the router to manually setup IPs now, then set the ip inside the Pro, as well as the default gateway, dns all that.) I'm telling ya, it is more like it doesnt know the DNS or the gateway (just like I disable internet surfing on the computers at work that I still must use networking)
I copied the DNS and everything from a working laptop (ipconfig -all) on a wireless laptop today, and still as if it was disabled.
This weekend i will test the dang thing tethering with my notebook i'll bring home from work (use the pro as the internet access). if it wont tether either, then I think allHell is doing something. Again if the device is DE-Activated I will wifi... {I'll bet you $$}. I might call alltel, tomarrow night, and try that. I'll have them inactivate it and if it suddenly works, then the question is, what do I do with alltel? they dont have the right to disable hotspot usage do they?
I feel I feel the presence of VERIZON already in Alltel, Luke is turning to the dark side. NOOOOOOOOOOOOOOOOOOOOOOOOO!
You all thought I was off my crock...
http://www.htcwiki.com/thread/2073117/Touch+Pro+WiFi?t=anon lots of folks posting same problems it looks like.
Need that group of people who can create a kitchen, and hcak tomtoms, to help us with this PLEASE!
No I don't, think you're off your crock I just know how frustrating problems like this can be. Here is what I suggest you do. And if this doesn't work exchange the phone or try a different router. I know what you're thinking....not the router. Truth is might be. Its just like wireless adapters in wii's and ps3's they simply will not work with a handfull of routers even though not clearly documented.
Anyway, change router to static Ip's, safer anyway.
Specifiy gateway, primary and secondary dns, and limit your ip's within 100 available obtainables. Use a 64 bit wep encryption. Change the channel of your router's broadcast to 1 or 11. Use only simple gateway ip range, not pure server. If you need me to provide you with example settings then pm me because I do not want to broadcast them via forum
Good luck.
Dont take this the wrong way....but are you positive that you are disabling the DATA Connection in Comm Manager?
I have had the alltel touch pro since the second they hit the store. I have used 3 of them since and they all work perfectly on wifi. I primarily use wifi and use diamond tweak to activate the wifi standby so wifi stays connected in standby like data does by default and use modaco nodata to disable data as I live in a house that gets a very lowsignal from the tower and eats my battery superfast if I use data. I have a router in the house and one in my office detached from my home and when I had my mogul it often would not switch between routers successfully requiring me to manually connect more often than not. All the Touch Pros connect superfast and switch automatically. I am running mightyrom 4.12 and telus radio which is light years better than stock with signal, speed and batterylife, but even when I was on stock for about 3 months there were absolutely no wifi issues.
ACoolGuy said:
Dont take this the wrong way....but are you positive that you are disabling the DATA Connection in Comm Manager?
Click to expand...
Click to collapse
Not sure which of us you are asking this queston of...
Thanks, for the help so far...
I was having the same issue (Alltel and all).
I found this post in the MS forums:
http://social.microsoft.com/Forums/en-US/windowsmobile/thread/561f18a8-5f64-4359-957e-adb003229f1d
Essentially, it says to "Navigate to START/SETTINGS/Connections Tab/Connections icon/Advanced Tab
Press Select Networks Button
At the top it says "Programs that automatically connect to the Internet should connect using:"
You want to press on the drop down and choose My Work Network"
You need to tell the system that the Work Network connects to the internet as well. While this doesn't seem like the ideal solution (there should be a faster way to switch it, or it should do it automatically depending on location), it did work for me. I'm sure there's a much more sleek solution out there, though.
Btw... I hope I'm posting this correctly. I'm more a reader than a poster.
Ooop... one more thing. Its non-sleekatude rests with the fact that when you want to switch between wifi and your data plan, you have to go through the whole process, and switch the active network from My Work Network to Alltell Wireless. This is where I was hoping for a better solution. As I say, it does work, but it seems like it should involve less hassle.
Might add this to the WIKI, I dunno but there could be a few more thousand users out there on ATT or SWB using the modem/routers that they shipped when you got DSL more than a year ago...
Everyone that has the older 2 wire brand, wifi modem/router that came with SBC (now ATT). Wierd I know. But Mine has just been replaced by the newer version of that modem/router. and I will be dammed, it works. but the phone wont work with the older ones. Mine was the 2WIRE 1000hw model. they are shipping new models, and finally the phone will work with the wifi on that new router.
Thought it might be nice to know...
alltel model uses wifi just fine
My TP from alltel works just fine with wi-fi all i ever do is turn it on and then select which connection i want to make ...really quite nice...maybe you need to exchange yours...
On further testing of my own setup, I'm thinking my issue was the router. I had done several fixes all at once, and cited the wrong fix as the working one. I happened to reset my router at the same time I did the above suggested fix.
I thought it had to be the device, as my HTC Apache never had an issue with the router, but after resetting the router, and going back to the original settings on the TP, I'm having no problems connecting to the network. I wish I could pinpoint the exact conflict between the two, but now that I have it working, I'm not messing with it.
My suggestion is to back up your router settings, reset the router, and see what happens. Or test your wifi on someone else's network.
Isolating a network conflict can be one of the least fun things to do, but from everything I've seen here and in other forums (and my experience with it) I'm going to say that's the issue, and not the TP alone.
I don't think it likes your router being wireless B, you should try it on a wireless G router before Ebaying it.
ok so my evo is Boosted and ive been trying to get faster speeds so i said F%*(%& it and i had a clear account for my Gaming needs and now i got Comcast so i said let try and get my phone on this account and finally last night they took it as an ( INTEL HANDHELD DEVICE ) and it is stupid fast im happy but when i try to use the 4G hotspot its NO GO BRO! it gives an error saying
"
ATTENTION:
Our records indicate there may already be an account for this device or that the incorrect network provider was selected in the Connection Manager.
You will need to select the correct network provider from the list of available networks in the Connection Manager.
The Connection Manager is currently looking for any new network providers that may have been recently added. Please wait at least 3 minutes for this update to take place prior to performing the steps outlined below.
Note: If you still experience issues obtaining a subscription on your network provider of choice, it may be necessary to install an updated version of your Connection Manager.
If using the Intel PROSet/Wireless WiMAX Connection Utility:
Perform a "Wide Area Scan" to select the correct network provider. "
( and there is a big picture here with some signal and whatever ) then it says follow these instruction ???
"
Select Disconnect to disconnect from the current network provider.
Select Show Network List or "Show network list" to perform a Wide Area Scan.
Select Search Networks to search for available networks.
Select the network to which you are subscribed.
Select Connect to connect to your subscribed network.
Refresh or restart your browser to access the internet.
Follow the instructions of your connection manager to scan for additional networks:
Disconnect from the current network provider.
Follow the instructions of your connection manager to search for all available networks.
Select the network to which you are subscribed.
Follow the instructions of your connection manager to connect to your subscribed network.
Refresh or restart your browser to access the internet. "
and in the box with the picture it says something about intel ??? should i try and call back and tell them its a dell mini or can someone here help me PLEASE ADVISE! thanks to all
PS
if you have to move feel free i just put it here cause i felt that it was a development Question but maybe im wrong thanks and sorry
What on earth?
On your Sprint Evo 3D, you're trying to use
- Clear WiMax 4G (not Sprint's)
- on the Boost Mobile network
- with a Comcast modem
- to play video games
This makes absolutely no sense -- slow down, son! What exactly are you trying to do here?
If you mean you just want to get your 4G hotspot working (regardless of provider), you obviously shouldn't use the built in Sprint hotspot (even the hacked one). You're going to have to screw around with Wifi Tether for Root (google it) or Barnacle, potentially in ad-hoc mode. Some tools (including the official hotspot tool) and some tethering modes pretty much tell the WiMax tower to assign a new IP to the broadcast, effectively giving your computer or laptop a distinct IP from the phone. This is why they don't work, and it's also how the company finds out. Clear probably sees this secondary IP request produced by the tethering app, notes that it isn't the IP configuration you set up with them (or paid for), and blocks your service.
Your solution? Get the phone working again, then use a different form of tethering or a different mode. Ad-hoc mode (Barnacle) and wired tether (PDANet) are practically guaranteed to work, unless Clear has a way of sniffing packets for routing protocols.
curiousGeorge said:
What on earth?
On your Sprint Evo 3D, you're trying to use
- Clear WiMax 4G (not Sprint's)
- on the Boost Mobile network
- with a Comcast modem
- to play video games
This makes absolutely no sense -- slow down, son! What exactly are you trying to do here?
If you mean you just want to get your 4G hotspot working (regardless of provider), you obviously shouldn't use the built in Sprint hotspot (even the hacked one). You're going to have to screw around with Wifi Tether for Root (google it) or Barnacle, potentially in ad-hoc mode. Some tools (including the official hotspot tool) and some tethering modes pretty much tell the WiMax tower to assign a new IP to the broadcast, effectively giving your computer or laptop a distinct IP from the phone. This is why they don't work, and it's also how the company finds out. Clear probably sees this secondary IP request produced by the tethering app, notes that it isn't the IP configuration you set up with them (or paid for), and blocks your service.
Your solution? Get the phone working again, then use a different form of tethering or a different mode. Ad-hoc mode (Barnacle) and wired tether (PDANet) are practically guaranteed to work, unless Clear has a way of sniffing packets for routing protocols.
Click to expand...
Click to collapse
So what im running is HTC evo 3d on Boost Mobile and i added a Clear account its fast but when i tether it wont let me gives the error ? ive read your suggestions/instructions and im a bit lost so any more help you can provide is cool! PLEASE ADVISE! thanks
just use barnicle tether or wifi tether
they work fine with phones running on clear.
I know thats not a seamless integration but you can try custom roms as well....
I usually just use wifi tether it seems to be better for "boosted" phones
esp the ones i get on clear
Zarboz said:
just use barnicle tether or wifi tether
they work fine with phones running on clear.
I know thats not a seamless integration but you can try custom roms as well....
I usually just use wifi tether it seems to be better for "boosted" phones
esp the ones i get on clear
Click to expand...
Click to collapse
well thanks for the help but i am running custom thats all ill run! im on Steal25 now and ive used the android tether before and it just seems not to like me ive always had better success with the hacked sprint hotspot! but i am desperate as if i cant get it fixed then its no purpose to have the clear account as i got comcast at home but when on the go i'm N THE NEED FOR SPEED! also as far as Barnacles it's always worked great but i guess i forgot about it Either Way i am glad for the responses and input to this problem
PS
can you tell me what you connected your phone to clear as ??? mine is labeled a intel handheld device ? and when i hit the page it says something about INTEL??? please advise
The Sprint WiFi tether does not work with 4G (clear). You'll need to use WiFi tether or the others. Wi-Fi tether works great and it's free. Check the boxes that say MSS clamping and routing fix (something like that).
Sent from my PG86100 using Tapatalk 2
moonpie28 said:
The Sprint WiFi tether does not work with 4G (clear). You'll need to use WiFi tether or the others. Wi-Fi tether works great and it's free. Check the boxes that say MSS clamping and routing fix (something like that).
Sent from my PG86100 using Tapatalk 2
Click to expand...
Click to collapse
I dont like Moonpies but your A Real HUKELBERRY much love to you man it F^(&(*&ing WORKED!!!!!!!! i was just about to call CLEAR and just MOVE my USB stick back on the account and i read your response i tried it and BADA BING BADA BANG it WORKED thanks alot to you and everyone who responded!
BUT KNOW HERE'S the new HEADACHE how do i SPEED IT UP as on the phone im getting anywhere from high 3's to 10meg but tethering the fastest so far has been 680 kb's faster then my 3g tether but REALLY NOW WHAT I WANT OR EXPECTED so is there a way to speed it up cause the clear is really fast but if im still near 3g speeds when i tether i will have to go back to my usb device PLEASE ADVISE!
I've noticed that whenever my wifi is on, and also the "always scanning" option is on - my phone suddenly connects to a network called "0x".
It doesn't really work - there is no internet. It happened in different places, inside and outside my country.
Does anybody know what it is?
UP
Old post, but happened something similar to me. Sometimes when I have just connected to my wifi network and I look on the menu it displays "0x". Your phone was probably connected to a public wifi or just bugged.
Still doesn't explain it though
In my understanding, the 0x is a garbage SSID that indicates that WIFI configuration data is obsolete.
Ite wonderful if u ask me ☺?
I booked a hotel room and when i arrived thr...my device got connected to Ox wifi and it has over 2Mbps speed...so i was curious about this Ox wifi hotspot so i searched on google and i found ur post and now i am more curios about it. What the hell is going on lol...
.
In my opinion it may have some connection with rooted devices bcz my device is rooted and i have samsung s8 as well and it neither finds this Ox wifi nor gets automatically connected☺:fingers-crossed:
Edit: As far as I see, it might a bug of Android with special cases of bad connection. Like it connects somehow, but can't get SSID. Turning on "avoid poor wifi" seems to fix it.
Same here. I've saved two wifi connections: one is my home network, other one is a network of free wifi transmiters offered by my ISP (UPC Wi-Free). My phone is Motorola Moto G with Android 5.1. It's not rooted and never has been.
I live around elder people and there were no strangers so I doubt some grandma suddenly established malicious network. Probably a bug, but the bug of what? Android? Some external software? I use Nova Launcher and Wigle Wi-fi. Do you?
0x seems to be prefix of hexadecimal numbers, but it doesn't make much sense. It wouldn't mean "hexadecimal zero" (which would be 0x0), but "hexadecimal nothing".
danagu said:
I've noticed that whenever my wifi is on, and also the "always scanning" option is on - my phone suddenly connects to a network called "0x".
It doesn't really work - there is no internet. It happened in different places, inside and outside my country.
Does anybody know what it is?
Click to expand...
Click to collapse
I've seen it too, then the actual SSID of my home network appears. Maybe Android shows '0x' when it doesn't know the name of the network it's on.