Related
I thought I saw a .cab file here somewhere that would allow you to bridge the 3G/EDGE connection to the WiFi connection so I can share my 3G over WiFi to laptop or whatever.
Anyone seen this? I cant remember the name, thought it was something like WMBridge or something.
Thanks
G
GuardianZX9 said:
I thought I saw a .cab file here somewhere that would allow you to bridge the 3G/EDGE connection to the WiFi connection so I can share my 3G over WiFi to laptop or whatever.
Anyone seen this? I cant remember the name, thought it was something like WMBridge or something.
Thanks
G
Click to expand...
Click to collapse
internet connection sharing will allow you to share your 3G over bluetooth or USB to your laptop !!
and now that I think about it you can almost certainly go through the arduous and difficult task of getting activesync to connect over an adhoc wifi connection, once that is done you will be able to use the phone as a 3G modem for your laptop.
ice_coffee said:
and now that I think about it you can almost certainly go through the arduous and difficult task of getting activesync to connect over an adhoc wifi connection, once that is done you will be able to use the phone as a 3G modem for your laptop.
Click to expand...
Click to collapse
u can do it tht way but its hard, and requires a registry hack, which to be fair doesnt work all that well, disconns after a couple of mins at best, bluetooth is the way to go if u want wireless connecton, although i use the lead for security, u can use the 3g conn as a modem, but then if u like us use tmob wb and walk then u cnt use ur data package.
hope this helps
Peter
The app is called wmWifiRouter. Looks like they just came out with a new version the 10th. Forget bluetooth, its not secured at all, and only lets you share with one device. With wmwifirouter you can share with many. See the link below.
http://forum.xda-developers.com/showthread.php?t=341398
excellent that is exactly what I was looking for, I will play with it today and see if I can get it to work.
Thanks
G
Should be a simple matter of copying the exe to your device and running it. It takes care of all the registry settings, starting up Internet Sharing, keeping the connection alive, and with the latest version you can even put the unit to sleep and your connection will stay alive. About the only thing it doesn't do is set up a peer-to-peer profile with a fixed IP address, but the thread above walks you through that. Make sure you set the profile to use WPA encryption (NOT WEP or 'open') and set a password.
techntrek said:
The app is called wmWifiRouter. Looks like they just came out with a new version the 10th. Forget bluetooth, its not secured at all, and only lets you share with one device. With wmwifirouter you can share with many. See the link below.
http://forum.xda-developers.com/showthread.php?t=341398
Click to expand...
Click to collapse
I finally got around to trying this and have had no luck. I followed the directions as best as I could tell. Anyone verify if this works on the Athena? I used to have the method set up manually but hadn't set it up again since updating to AP3.0. This would be much handier... if works!
wgary said:
I finally got around to trying this and have had no luck. I followed the directions as best as I could tell. Anyone verify if this works on the Athena? I used to have the method set up manually but hadn't set it up again since updating to AP3.0. This would be much handier... if works!
Click to expand...
Click to collapse
Powell,
Why not build this into AP 4.0 ROM?
eaglesteve said:
Powell,
Why not build this into AP 4.0 ROM?
Click to expand...
Click to collapse
i was trying for 3.0 actually but couldnt get it to work at time bc of confusing instructions. i will though in 4.0 100%
I verify that it works with the Athena and it works great. Let me know if your having trouble. I've been using it everyday now with no problems.
Pawel062 said:
i was trying for 3.0 actually but couldnt get it to work at time bc of confusing instructions. i will though in 4.0 100%
Click to expand...
Click to collapse
The directions are confusing because the newer method was grafted onto the same thread as the older method. So it's hard to tell what's what. I put about an hour into this but made no progress. The exe file doesn't appear to do anything on the Athena...
MWillis561 said:
I verify that it works with the Athena and it works great. Let me know if your having trouble. I've been using it everyday now with no problems.
Click to expand...
Click to collapse
Sorry, just saw your response as I wrote mine. Here is what I did:
1. set up an ad hoc network on my Athena. IP address 192.168.0.1 (another place saide 192.168.0.7--tried both)
2. Set up on my client (MacBook Pro). A connection was established.
3. Ran the exe file -- nothing happened. One comment said to deactivate the network before running. I did this in various degrees with no success.
4. Also opened up the Internet Sharing applet and tried to connect manually -- "USB cable is not connected."
Clearly I'm missing something here. It would be very handy to have this capability. Can you clarify??
Not sure why you are having a problem - I unzipped the zip, transfered the exe to the athena and it ran on the first try after first setting up the ad-hoc wifi connection (settings, connections, wi-fi, network adapters tab, IEEE..., use specific IP address in the 192.168.x.x range; then go to the other tab and set up an ad-hoc connection).
I had an even worse experience. Everytime I ran the exe, my Athena locked up, needing a complete reset each time.
I gave up in the end .
I have got other methods to work using Mortscipts, but it does seem like something that would be well worth someones time sorting out for the good of us all.
Have you tried the latest version of wmWifiRouter? The developer released a new version of it earlier this month. Its on version 0.8 now.
Hey all,
So I've got a small issue. I've got a Verizon XV6800 with the MR1 Rom WM6.1, Valhalla GPS server, 3.42.50 Radio.
Internet connection sharing is not working at this point. I've gone through the winmodem and internet connection sharing cab installs, registry edits, etc. None seem to help.
I previously had a ATT tilt 8925 and had no issues whatsoever tethering it to my mac by just pairing the phone, selecting to "Using a direct Higher speed connection to reach your ISP". Starting Internet Sharing on the phone, selecting Bluetooth PAN & the default data connection, then selecting connect. Then selecting "Connect to network" On the mac through the my phone listed in the bluetooth connections. That simple.
Having installed the "Internet Sharing" cab onto the phone. Internet sharing appears to work, but the phone does not advertise this service, like the ATT tilt did on ATT's network.
I've also tried a few registry edits, and used all variations of modem scripts, and got all the dialup info from verizon directly (so I know it was right ) but could not get dialup to work either. Usually not detecting a carrier, other times lockups.
I truely want to get the bluetooth-PAN working again as it did on my tilt. Anyone have this working on the MAc with a XV6800 on verizon?
i did have it working before. I'm wondering if you might be more successful with a custom rom. Verizon installs software (at least previous roms, I haven't tested the MR1 rom) that reverts reg edits and keeps it working like VzW wants it to. This could be causing problems. First check after a soft-reset to make sure your reg edits still exist.
Also I'm sure you've tried this be in Leopard's bluetooth setup delete the phone and try again. You need to select the type of device as any device in order for leopard to see it. Can you connect the device to your mac? Try that first. If you get a BT connection non-internet connection and you change your settings delete the phone and try again. I forget some of the setting I used. Also Engadget had a how to article for BT pan using the xv6700 and Tiger most of the information is still useful. It's a couple years old so you might have a hard time finding it.
Hope some of that helps.
Cycomachead said:
i did have it working before. I'm wondering if you might be more successful with a custom rom. Verizon installs software (at least previous roms, I haven't tested the MR1 rom) that reverts reg edits and keeps it working like VzW wants it to. This could be causing problems. First check after a soft-reset to make sure your reg edits still exist.
Also I'm sure you've tried this be in Leopard's bluetooth setup delete the phone and try again. You need to select the type of device as any device in order for leopard to see it. Can you connect the device to your mac? Try that first. If you get a BT connection non-internet connection and you change your settings delete the phone and try again. I forget some of the setting I used. Also Engadget had a how to article for BT pan using the xv6700 and Tiger most of the information is still useful. It's a couple years old so you might have a hard time finding it.
Hope some of that helps.
Click to expand...
Click to collapse
As mentioned, I have tried a ton of different methods to try and use the data connection, from using dialup settings, to trying to get the Bluetooth Pan working. I've removed and re-paired the device from my mac, flashed roms, hacked away at the registry a ton of times. Nothing seems to give so far.
I've got one more suggestion, found here: http://forum.xda-developers.com/showpost.php?p=1794133&postcount=29
I'm going to give this a shot tomorrow and will let you know how it goes.
Eponymous069 said:
Hey all,
So I've got a small issue. I've got a Verizon XV6800 with the MR1 Rom WM6.1, Valhalla GPS server, 3.42.50 Radio.
Internet connection sharing is not working at this point. I've gone through the winmodem and internet connection sharing cab installs, registry edits, etc. None seem to help.
I previously had a ATT tilt 8925 and had no issues whatsoever tethering it to my mac by just pairing the phone, selecting to "Using a direct Higher speed connection to reach your ISP". Starting Internet Sharing on the phone, selecting Bluetooth PAN & the default data connection, then selecting connect. Then selecting "Connect to network" On the mac through the my phone listed in the bluetooth connections. That simple.
Having installed the "Internet Sharing" cab onto the phone. Internet sharing appears to work, but the phone does not advertise this service, like the ATT tilt did on ATT's network.
Click to expand...
Click to collapse
I was wondering if you be gracious enough to share the Internet sharing CAB i only need to get it to work thought the USB cable and on a windows box, and from what im getting you got that far... JUST not working on a mac...
if thats the case, i would be ever so greatful..
Thanks
thetaz01 said:
I was wondering if you be gracious enough to share the Internet sharing CAB i only need to get it to work thought the USB cable and on a windows box, and from what im getting you got that far... JUST not working on a mac...
if thats the case, i would be ever so greatful..
Thanks
Click to expand...
Click to collapse
You can use the link from the previous post here, and just copy the dll's and exe to the Windows directory, and place teh shortcut into the Device\Windows\Start Menu\Programs\ directory.
Eponymous069 said:
You can use the link from the previous post here, and just copy the dll's and exe to the Windows directory, and place teh shortcut into the Device\Windows\Start Menu\Programs\ directory.
Click to expand...
Click to collapse
hey, ok great, i just downloaded the file, Just one question..
The file i downloaded has about a page of Reg Key changes, you didnt mention that in your "thngs to do"
Just want to see if i am to make all those changes or not.
thanks
So, your problem is in getting the internet connection to work and not connecting it to the mac, right? Does your mac recognize the phone as a modem?
If you're using MR1 I think you might need to hard reset and the soft reset right before the Verizon customizations run. You won't be able to run their apps but there won't be software to cripple the phone.
i have the same exact issue i have a new macbook pro and the bluetooth connects however the speed is slower then dial up it works perfectly however on bootcamp apple has to change the drivers
So more results.
I tried all the registry edits, (much easier with CD-Regedit so you can make the changes on your desktop) and now internet sharing does not even allow me to select a connection type, it had worked previously.
The only thing that was missing before I made the registry changes was that when I pair the phone, in the services listed, "Network Access Point" is not one of the listed services. My old phone has this service listed, and this is how I used it, where I started internet sharing on the phone, then selected the bluetooth device (phone) on the mac and selected: "Connect to Network) and it worked flawless.
Back to the drawing board. I'm going to try next to re-flash the MR1 rom and do as Cycomachead suggested and stop verizons customizations from happening.
bryanw17, what were the exact settings you used for dialup on the mac. The modem script used is probably the most important piece.
Number: #777
Username: Phonenumber (or [email protected]????)
Password: (We know this one, not sure if it's legal to post though)
Darn, I wish I could provide more help. It is indeed possible in Leopard, I had it going before I began flashing my phone - and I no longer have a data plan to test, otherwise I'd be using it a lot more!
aparently no one with a new macbook pro can get bluetooth pan to work. I have it connected however the drivers for the new macbook pro do not provide a good connection if you search the mac forums theyve been talking about it on there. I dont use a username n password however because i use the internet sharing app for the moment i am using wmwifirouter to connect online however my xv6800 doesnt charge at the same time for some reason so u can only use it till the battery dies
So some more results.
I installed ICS and all the registry edits. Then the internet Connection Sharing did not function at all. I verified the registry settings, all were fine. So no dice with me.
So back to the drawing board.
I installed a previous rom. DCD 3.2.6, and guess what? From initial flash of the phone and initial setup, no apps installed, no hacking, ICS runs and provides a network connection to my mac perfect. I also instantly notice when I pair it through bluetooth, it allows the option of "Access this device as a network port". And "Network Access point" is listed as an offered service.
I installed newer rom DCD 3.3.4, and the MR1 Rom. Neither have ICS installed initially. I can install the two files: intshare.dll and IntShrUI.exe into the windows directory without any reg edits, and then ICS works on the phone, but then pairing the phone to the Mac, and attempting to discover teh PAN service is unsuccessful. It only is discovered as a Dialup Access device, and not a "Network Access Point".
So, It appears I can get internet Sharing via Bluetooth PAN to function on the phone no matter which rom, but have not figure out how to tell the mac, or trick the mac, into thinking the "Network Access Point" service is available.
I have pulled completed registry dumps with CE-Regedit and compared the differences between the two, which there are quite a few, but not sure how to export these differences with the program so I can apply them to the other roms registry. I guess I might try a fukll backup and then restore to the new(er) rom and cross my fingers.
I'd stay with the 3.2.6 rom. and 3.42.50 Radio, with PRI 2.03, but I can only seem to make the GPS function successfully with the MR1 stock verizon rom.
Anybody want to take the two regs files compare, and see if they can find out where we can make the change to have the phone advertise the service "Network Access Point" when being paired to the mac or PC?
On one last note. I also tried the method of restoring the MR1 official rom, and then not allowing the customizations. ICS will function, but again, not advertising the service: "Network Access Point" when pairing, so it's not recognized as a valid networking method.
Where did you get those files (intshare.dll and IntShrUI.exe) to allow ICS via bluetooth?
Nevermind, I found it on PPCGeeks.
Don't know why DCD disabled the BT DUN on ICS.
I use Missing sync, and I turned on PAN then added my phone and it shoed it as a modem when I added it, but my BT connection is fairly Unrealible compared to the USB teather on Bootcamp
i was under the impression that bt pan has been whacked on macbook pro models starting from early 2008 on. anything earlier than that and it seems to work great. does anyone know why bt pan doesnt work on the newer machines and how to get it to work?
This really really pi##es me off, as where I live I get 1x data, & usually use my home wireless (wifi).
Recieved the pro, and activated it. It seems disabled by being activated by alltel. I even stumped the blackberry adept person at the local store enough that they switched out the phone, I walked to next door (motel) used the free wireless (to prove the wireless would even function) then let him activate it and headed home (30+ miles into the wilderness). got home and again I cant get Crap wifi to work.
Home is wireless b, it connects, can be seen on the 'simple' 2 wire wireless appliance but the PRO, will not see or try to send data through it. turned off security and everything on the wireless for testing. I can check, but I know the pass for the motel, and I could try again, but am definitely sure that this AINT the issue--> again the phone wouldnt connect at the motel (least not the pre exchanged one) with me or the rep at Altel either, while it was activated and on alltel.
who to call? Any help out there?
my 6800 will still wifi, at anyplace there is a signal and that I know the passcodes or is open.
yes I asked this, at alltel-howard forums, but would think you guys here know more (on second thought, when I remembered about all the stuff you do here, I know I probably should've posted here 1st, but Im kinda mad at the moment!)
Pretty adept at computers, I do IS as my real job, anything I can do to help trouble shoot? yeah the 6800 has been flashed & I even noobed around with cooking a few time. appreciate any help you guys
i Have a touch pro and a touch diamond, both under 2 weeks old and the wifi works fine with both of them, maybe you should try a custom rom and see if they changes anything. but there is no reason it shouldnt work with the stock rom
goonygugle said:
i Have a touch pro and a touch diamond, both under 2 weeks old and the wifi works fine with both of them, maybe you should try a custom rom and see if they changes anything. but there is no reason it shouldnt work with the stock rom
Click to expand...
Click to collapse
goony,
Is it an Alltel? are you positive that wifi is working, not the "data" connection with alltel towers (cell call)? My proof is that if I goto my basment, I have no cell service so not any data connction, ONLY WIFI (that is where my wireless router is. that is when I found out the 1st time. Everything else looks right, on the phone it says it is connected, on the router I can see it on the connected devices list.
I have my issue that I believe, that it is some setting that Alltel is setting... like I said the phone would connect via wifi until the phone activated. When I activated (full unlimited data package is on this phone) the phone fully rebooted on its own, 3 times as if getting updated via data plan. Im not talking about the 1st time turn on customizations, those were done before I tested the wifi at the motel lobby... For instance, the volume control buttons - the display app were obviously modified, I am not positive what else was.
I'd LOVE to try custom rom, if I wasnt right in the period of time I can get my money back, or not. after that I will...
yes they are alltel, and to test the wifi i just connected it to my router and then turned of my alltel data and it stayed connected so i am positive the wifi works. you can still use a custom rom under your return period, if you want to return just relock it.
I wanted to double check myself sting to make sure i was realy getting wifi, so i connected and went to speedtest.net and did a speed test and sure enough it showed my isp as roadrunner(my home provider). Have you had this problem with multiple phones? are you checking the internet option when it connects? and do you have it diconnected from the pc? my wifi wont work on my diamond hooked to a pc.
Has nothing to do with alltel. Maybe with the rom or the phone. Now I hope you're not waiting for a pop up to show itself on the main screen asking if you want to connect because you could wait forever. Go to comm manager enable wifi/ go to start->settings->connections->wifi and make sure options are set to "all available." If you can even see wireless networks on the list, the wifi is functioning correctly and there is a router settings conflict. If you don't see networks on that list in wifi, then there is a rom/hardware problem.
Sweeny Russ said:
Has nothing to do with alltel. Maybe with the rom or the phone. Now I hope you're not waiting for a pop up to show itself on the main screen asking if you want to connect because you could wait forever. Go to comm manager enable wifi/ go to start->settings->connections->wifi and make sure options are set to "all available." If you can even see wireless networks on the list, the wifi is functioning correctly and there is a router settings conflict. If you don't see networks on that list in wifi, then there is a rom/hardware problem.
Click to expand...
Click to collapse
Hey thanks!
But, it is the Stock shipped rom, I have my HTC 6800 right next to this one, connected and surfing the web, both show up when in the home WIFI router config as connected, yet the pro sends NO DATA to ie or opera, (cant locate any webpages) or any app that uses internet/data.Unless there is something I need to do with PRO that I never had to do with the 6800 (mogul) that I just flashed back to stock shipped rom, ready to sell on ebay...
what I dont know is, well, most of the people wifi to tether a laptop or something, I dont! Sure that will be neat in the future, but RIGHT NOW, Just I use WIFI when I am at home and dont even have signal or evdo near me... (remote locations that I live, the tower coverage sucks out here in ks...) Got to fix this soon, or this Beyotch is going back to alltel.
Another thing, this bad boy pulled this crap, as soon as alltel activated the device (so I could use it as my phone!) when it was NOT activated, the wifi worked (proven at the motel next door to the Alltel store I exchanged this phone). BTW, I was able to test it on the 1st phone shipped to me, while it was activated, it pulled the same thing, when he unactivated the phone, we could almost pickup the wifi from the motel next door (distance was the only issue I think now looking back) but seemed like a chip problem.
Where I got screwed was we believed the wifi to be bad on the 1st phone. So he got out a new phone, and before we activated it, I went and tested the wifi, it worked on the 2nd phone. I thought wall was fine, it worked. then I had him activate it, assuming that proved I will be able to use the wifi. So I leave the store thinking OK wifi works. I get home, and again unable to use my home networking wifi to open web or apps. unacceptable. Yet the 6800 does and still works flawlessly (as long as you slide the wifi sider on side to on {inside joke}).
follw me better now?
What brand router do you have? How many devices are wireless? And it connects to other locations but are you sending and recieving data? Try this link http://www.wmwifirouter.com/trial/ and install on 6800 if you are not normally around hotspots. This will test the t-pro's ability to send and recieve information via wifi. Now it is sounding like an IP address conflict.
Sweeny Russ said:
What brand router do you have? How many devices are wireless? And it connects to other locations but are you sending and recieving data? Try this link http://www.wmwifirouter.com/trial/ and install on 6800 if you are not normally around hotspots. This will test the t-pro's ability to send and recieve information via wifi. Now it is sounding like an IP address conflict.
Click to expand...
Click to collapse
Sweeny, Im in the houshold router (made by 2wire) I can see it (the Pro as well as the 6800) each get an ip. (I work In IT, so I know what you are talking about in ip conflicts, all that.) I have even set the router to manually setup IPs now, then set the ip inside the Pro, as well as the default gateway, dns all that.) I'm telling ya, it is more like it doesnt know the DNS or the gateway (just like I disable internet surfing on the computers at work that I still must use networking)
I copied the DNS and everything from a working laptop (ipconfig -all) on a wireless laptop today, and still as if it was disabled.
This weekend i will test the dang thing tethering with my notebook i'll bring home from work (use the pro as the internet access). if it wont tether either, then I think allHell is doing something. Again if the device is DE-Activated I will wifi... {I'll bet you $$}. I might call alltel, tomarrow night, and try that. I'll have them inactivate it and if it suddenly works, then the question is, what do I do with alltel? they dont have the right to disable hotspot usage do they?
I feel I feel the presence of VERIZON already in Alltel, Luke is turning to the dark side. NOOOOOOOOOOOOOOOOOOOOOOOOO!
You all thought I was off my crock...
http://www.htcwiki.com/thread/2073117/Touch+Pro+WiFi?t=anon lots of folks posting same problems it looks like.
Need that group of people who can create a kitchen, and hcak tomtoms, to help us with this PLEASE!
No I don't, think you're off your crock I just know how frustrating problems like this can be. Here is what I suggest you do. And if this doesn't work exchange the phone or try a different router. I know what you're thinking....not the router. Truth is might be. Its just like wireless adapters in wii's and ps3's they simply will not work with a handfull of routers even though not clearly documented.
Anyway, change router to static Ip's, safer anyway.
Specifiy gateway, primary and secondary dns, and limit your ip's within 100 available obtainables. Use a 64 bit wep encryption. Change the channel of your router's broadcast to 1 or 11. Use only simple gateway ip range, not pure server. If you need me to provide you with example settings then pm me because I do not want to broadcast them via forum
Good luck.
Dont take this the wrong way....but are you positive that you are disabling the DATA Connection in Comm Manager?
I have had the alltel touch pro since the second they hit the store. I have used 3 of them since and they all work perfectly on wifi. I primarily use wifi and use diamond tweak to activate the wifi standby so wifi stays connected in standby like data does by default and use modaco nodata to disable data as I live in a house that gets a very lowsignal from the tower and eats my battery superfast if I use data. I have a router in the house and one in my office detached from my home and when I had my mogul it often would not switch between routers successfully requiring me to manually connect more often than not. All the Touch Pros connect superfast and switch automatically. I am running mightyrom 4.12 and telus radio which is light years better than stock with signal, speed and batterylife, but even when I was on stock for about 3 months there were absolutely no wifi issues.
ACoolGuy said:
Dont take this the wrong way....but are you positive that you are disabling the DATA Connection in Comm Manager?
Click to expand...
Click to collapse
Not sure which of us you are asking this queston of...
Thanks, for the help so far...
I was having the same issue (Alltel and all).
I found this post in the MS forums:
http://social.microsoft.com/Forums/en-US/windowsmobile/thread/561f18a8-5f64-4359-957e-adb003229f1d
Essentially, it says to "Navigate to START/SETTINGS/Connections Tab/Connections icon/Advanced Tab
Press Select Networks Button
At the top it says "Programs that automatically connect to the Internet should connect using:"
You want to press on the drop down and choose My Work Network"
You need to tell the system that the Work Network connects to the internet as well. While this doesn't seem like the ideal solution (there should be a faster way to switch it, or it should do it automatically depending on location), it did work for me. I'm sure there's a much more sleek solution out there, though.
Btw... I hope I'm posting this correctly. I'm more a reader than a poster.
Ooop... one more thing. Its non-sleekatude rests with the fact that when you want to switch between wifi and your data plan, you have to go through the whole process, and switch the active network from My Work Network to Alltell Wireless. This is where I was hoping for a better solution. As I say, it does work, but it seems like it should involve less hassle.
Might add this to the WIKI, I dunno but there could be a few more thousand users out there on ATT or SWB using the modem/routers that they shipped when you got DSL more than a year ago...
Everyone that has the older 2 wire brand, wifi modem/router that came with SBC (now ATT). Wierd I know. But Mine has just been replaced by the newer version of that modem/router. and I will be dammed, it works. but the phone wont work with the older ones. Mine was the 2WIRE 1000hw model. they are shipping new models, and finally the phone will work with the wifi on that new router.
Thought it might be nice to know...
alltel model uses wifi just fine
My TP from alltel works just fine with wi-fi all i ever do is turn it on and then select which connection i want to make ...really quite nice...maybe you need to exchange yours...
On further testing of my own setup, I'm thinking my issue was the router. I had done several fixes all at once, and cited the wrong fix as the working one. I happened to reset my router at the same time I did the above suggested fix.
I thought it had to be the device, as my HTC Apache never had an issue with the router, but after resetting the router, and going back to the original settings on the TP, I'm having no problems connecting to the network. I wish I could pinpoint the exact conflict between the two, but now that I have it working, I'm not messing with it.
My suggestion is to back up your router settings, reset the router, and see what happens. Or test your wifi on someone else's network.
Isolating a network conflict can be one of the least fun things to do, but from everything I've seen here and in other forums (and my experience with it) I'm going to say that's the issue, and not the TP alone.
I don't think it likes your router being wireless B, you should try it on a wireless G router before Ebaying it.
I feel like I need to 1st explain that although I don't post here often I'm not an absolute noob. I load a new ROM about every 30 days and used Tierman before advancing to Sashimi. Ever since the 6.5 roms dropped I've been unable to see my Titan from ANY laptop/desktop. I'm looking for others with the same issue and/or if this is a known issue that has been resolved.
Tried RyanMogul6800 2.2 Heavy
Tried JUSTPCTECH 6.5 Rom
Tried an un-named 6.5 Rom prior to the 21501 release
Same issue on all of these roms, SSID/PPC not visible
Device is a 6800 Alltel branded on the Alltel network
WMWifirouter version is 1.35
Tried deleting the wifi listing on the pc's/laptops
Tried re-installing WmWifirouter
Tried rebooting everything
Tried changing hardware switch to control ringer on/off instead of wifi
Tried manually powering on wifi via Comm Manager
I know wmwifirouter started out testing here so I hope they see this post but I will be accessing my paid support with wmwifirouter to submit a support ticket.
Has anyone else experienced this?
What did you do to fix it?
Try going into settings, connections, Wireless LAN, change power mode to best performance. Then go into settings, connections, wifi and if any connections are in there delete them. Make sure no connections are attempting to connect. Now turn on wifi switch and go back into wifi settings. Pick to see ad hoc only and create new. Make a name and make it an ad hoc connection, pick open connection no security protection. Finish. Now using wifi on a laptop/desktop refresh the wifi and you should now see your connection. Quick tip when using WmWifirouter. Make sure nothing is connected to your PPC's adhoc connection. Have the wifi switch enabled BEFORE turning on WMwifirouter, Once its connected you can then use a desktop or laptop and connect to the PPC, and dont turn the WIFI OFF until you have quit WMwifirouter. I use the network plugin to access shared folders on my PC to transfer music etc.. Also make sure the wifi on the PC is not set up to share its own connection. That will interfere with the networking with the wifi on the PPC. Let me know if you get wi-fi working.
Thanks and I'm trying that now..only thing is I've been using WMWifirouter cince before it was 1.0 and it always worked fine. While i'm trying your suggestion is their anything different with 6.5 that would have me manually connecting.
I'm used to setting up wmwifirouter in the office and letting 2 otherppl access it and just GO! This happens on Vista, XP, and Windows 7 (I'm an MSDN subscriber). Anyhow trying your suggestions and let me know about 6.5 if you goet a sec.
Thanks
Tried it and my network showed up for a sec but when I tried connecting it timed out and then never showed up again. USB to 3G works fine and I tried ur suggestion on Vista & XP. Still pokin away. Hope sumthin works out!
Just a side note. My wifi IP on the 6800 is always all 0's 0.0.0.0 Shouldn't it be 192.16.3.1 and DHCP is enabled BTW
I'm experiencing a similar problem and have tried several 6.5 builds, including my own from the ppckitchen. WIFI will work for some time and then stop. It will work again for a short time after rebooting but then will stop once more.
So after JustPCTechs (I prefer Ryans Rom) rom i am back on RyanMogul's heavy & it's still not working. I like many people looked at others with this issue like it's something they are doing wrong but I am an EVERY DAY user of wmwifirouter. I cancelled my itnernet at the house simply because Alltel's unlimited was so fast. I even had the kid's Xbox 360 running through it.
So I'm still stuck with no wifi for wmwifirouter. Even after Ryan's suggestions. I know other people have this problem. I just wish you guys would speak up so we can collect data on this issue and resolve it for real.
No disrespect to the very talented individuals whom have assisted me so far. You and your work are greatly appreciated.
I'm also verifying the problem exists. Also I cannot connect my home pc's internet through the USB cable to the phone anymore. I have verified this same problem with all 3 of the 6.5 roms I've tested. I tried ryan's suggestion but to no avail. Looks great though!!
For the issue of the PPC not being able to use your PC's internet through USB cable you may want to try going into settings/connections/connection settings/select network. Make the top drop down menu My work network and the bottom drop down menu make your Carrier ex:Cricket, MetroPCS, etc.. That way should use your WAP when unplugged and use the PC's home connection when plugged in. That would then be normal operation.
SOLVED:
So I was poking around in the 6800 and I never use wifi because Alltel is SOOO fast. I saw a saved network connection ON THE 6800 to wmwifirouter. I thought it was odd since I asked wmwifirouter to dynamically create the network each time instead of storing it.
After doing that I was able to consistently see the 6800 from any device.
So Comm Manager / wireless Lan/ delete wmwifirouter
I've had the usb issue a long time ago and it is not the same.
RyanMogul6800 said:
Then go into settings, connections, wifi and if any connections are in there delete them. Make sure no connections are attempting to connect.
Click to expand...
Click to collapse
If you notice i already said to delete existing wi-fi connections. So my first responses were your solution. you just overlooked it.. take care glad your sorted out.
I guess I did and let me make this real clear for anyone reading this later on. Wmwifirouter creates a wifi connection ON YOUR PPC DEVICE - TO YOUR PC DEVICE.
So when people tell you to delete all wifi connections and you delete the one on your laptop/desktop don't forget (like i did) to delete it on the ppc as well. I never knew thats how wmwifirouter worked. Learn somethin new every day. Thanks to all that helped.
ebonygirl said:
I guess I did and let me make this real clear for anyone reading this later on. Wmwifirouter creates a wifi connection ON YOUR PPC DEVICE - TO YOUR PC DEVICE.
So when people tell you to delete all wifi connections and you delete the one on your laptop/desktop don't forget (like i did) to delete it on the ppc as well. I never knew thats how wmwifirouter worked. Learn somethin new every day. Thanks to all that helped.
Click to expand...
Click to collapse
In my instructions it is telling you to delete the connections off of the PPC.. Any connection on your PC would not automatically connect unless u had a matching ad hoc connection on ur PPC. I provided the fix and u overlooked/misunderstood it. I am glad you got ur wifi back up and running.
Anyone successfully tethered an Archos 5 Internet Tablet with Android to Verizon Touch Pro, so as to get that lovely EVDO Rev A displayed on that nice 4.8 inch screen?
I have an old SSK ROM (probably a good year old). I've tried WMWiFiRouter (Bluetooth and WiFi) and ICS (BT) to no avail. All of these work from my Win7 laptop. Bluetooth option requires just pairing; no config at all.
Apparently one issue is that Android (at least the 1.6 Donut on the Archos) can't connect to WiFi in Ad Hoc mode.
Don't know for sure what the BT issue is. Two things do jump out:
1. phone doesn't show NAP or PAN in the supported profiles in BT settings
2. laptop sees DUN as a profile. Archos doesn't show any listed after pairing
Any idea if one of the nice ROMs out there will help?
Thanks!
Kevin
This would make my year if I can get this working..
Archos 5 (fw:1.7.33)
Verizon Touch Pro 2(wm6.5)
When I try to turn the tether on (on the archos), "Dial-up Networking" in the bluetooth settings of the TP2 appears for the duration of it trying to connect. If the DATA Connection is connected, it will disconnect when you attempt to tether and not even try to reconnect.
So.. The phone sees a dial up connection from the bluetooth but theres a missing link between there and it actually dialing out. I tried wmwifirouter.exe but I cant get the bluetooth to work in that.
Weird thing: While tethering was tring to astablish a connection, I opened IE on the TP2 (to manually connect data) and got the Verizon tethering page (yes, on my phone) asking me sign up.. huh?
I heard from my coworkers that it is possible enable Ad-hoc in Android.. anyone try it with the archos?
jdamore said:
This would make my year if I can get this working..
Archos 5 (fw:1.7.33)
Verizon Touch Pro 2(wm6.5)
When I try to turn the tether on (on the archos), "Dial-up Networking" in the bluetooth settings of the TP2 appears for the duration of it trying to connect. If the DATA Connection is connected, it will disconnect when you attempt to tether and not even try to reconnect.
So.. The phone sees a dial up connection from the bluetooth but theres a missing link between there and it actually dialing out. I tried wmwifirouter.exe but I cant get the bluetooth to work in that.
Weird thing: While tethering was tring to astablish a connection, I opened IE on the TP2 (to manually connect data) and got the Verizon tethering page (yes, on my phone) asking me sign up.. huh?
I heard from my coworkers that it is possible enable Ad-hoc in Android.. anyone try it with the archos?
Click to expand...
Click to collapse
Actually, with the latest Archos firmware (1.7.71? last week), it works great for me. After updating, I unpaired and repaired the devices. I use Internet Connection Sharing with BT, and use Archos Tether, and it works quite nicely. The power control widget is helpful here too; sometimes I need to power-cycle the Archos BT, then turn on tether, to get it to work.
kevinsneel said:
I use Internet Connection Sharing with BT, and use Archos Tether, and it works quite nicely.
Click to expand...
Click to collapse
Internet Connection Sharing is a program/setting? Or are you just saying you share internet through bluetooth.. Sorry just being thorough.
haha I'm not surprised there has been an update since 1.7.33. Hopefully that will fix my random reboots.. Ill report later tonight if the update to 1.7.71 helps. Thanks!
jdamore said:
Internet Connection Sharing is a program/setting? Or are you just saying you share internet through bluetooth.. Sorry just being thorough.
haha I'm not surprised there has been an update since 1.7.33. Hopefully that will fix my random reboots.. Ill report later tonight if the update to 1.7.71 helps. Thanks!
Click to expand...
Click to collapse
Internet Connection Sharing is a standard Microsoft WinMo program, but it is often dropped from carrier phones. It's pretty easy to find online.
WMWiFiRouter likely also should work in BT mode with 1.7.71, but I haven't tried it.
Kevin.. I'm being an idiot. You have the touch pro and I have the touch pro 2.
Bluetooth on wmwifirouter and on ICS (maybe i have the wrong ICS) seem to be not supported on the TP2. The only options is wifi/usb with wifirouter and usb with ICS
I'm assuming I need a program like those two that will work with bluetooth? I get the message on the TP2 "this device is attempting to connect to the internet" and I accept but still nothing... is this where wifirouter and ics come into play?
BT for ICS and WMWiFiRouter on TP2 vs TP
Odd that ICS and WMWiFiRouter should have less functionality on TP2 WinMo 6.5 than on TP WinMo 6.1...
Maybe you'll want to ping Morose Media (WMWiFiRouter folks) to see if they have any thoughts, as well as ask general ICS question on this site.
What version of WMWiFiRouter (I have 1.25, build 600) do you have?
And where di you get your ICS?
kevinsneel said:
Odd that ICS and WMWiFiRouter should have less functionality on TP2 WinMo 6.5 than on TP WinMo 6.1...
Maybe you'll want to ping Morose Media (WMWiFiRouter folks) to see if they have any thoughts, as well as ask general ICS question on this site.
What version of WMWiFiRouter (I have 1.25, build 600) do you have?
And where di you get your ICS?
Click to expand...
Click to collapse
Oh, I see the following on WMWiFiRouter page. Too bad. Another reason to hold off getting TP2 .
# HTC Touch Pro 2
* AT&T Tilt 2
* HTC Rhodium
* Sprint Touch Pro 2
* Support from version 1.50. Sharing using Bluetooth not currently supported.
Odd that ICS and WMWiFiRouter should have less functionality on TP2 WinMo 6.5 than on TP WinMo 6.1...
Click to expand...
Click to collapse
I tried it with both WM6.1 and WM6.5 and its the same thing.
What version of WMWiFiRouter (I have 1.25, build 600) do you have?
Click to expand...
Click to collapse
Running 1.6
There must be something unique about the BT on the TP2. Is there a reg hack that Morose Media hasn't even found yet? I'll write to support and see if they have any comments.
And where di you get your ICS?
Click to expand...
Click to collapse
sorry i'm a noob.. I cant post links yet but its from ppcgeeks[dot]com
I hope there will be an update for wmwifi.
Might be easier to hack ad-hoc onto the Archos.. know anything about that lol?
jdamore said:
I hope there will be an update for wmwifi.
Might be easier to hack ad-hoc onto the Archos.. know anything about that lol?
Click to expand...
Click to collapse
You may want to check out the following thread. I think some of the Android users (e.g. G1) folks may have made some progress, but I don't know if that was on client or server side.
I wrote to morose about the TP2.. heres what they said:
We are looking into supporting the new non-Microsoft Bluetooth stack that comes with the new HTC devices, however unfortunately I cannot give you a date when we might have a beta of this available. All I can say is that the development team is working on it.
Click to expand...
Click to collapse
As soon as they have it working ill purchase that minute. In the mean time, I'm going to see if I cant get ad-hoc on the archos..
thanks for the help kevin
jdamore said:
I wrote to morose about the TP2.. heres what they said:
As soon as they have it working ill purchase that minute. In the mean time, I'm going to see if I cant get ad-hoc on the archos..
thanks for the help kevin
Click to expand...
Click to collapse
My pleasure... Good luck!
By the way, I asked them about supporting multiple devices over bluetooth, and the next day they gave me a prototype that does it, and they say they will put that into the main product. Now that's service! I love it -- much lower power usage and heat than WiFi, and plenty fast enough for my uses. Should run much longer that way. I'm psyched!
I am in the same boat with an archos 5 android tablet, the HTC touch PRO and sprint as a carrier. let me know if you come up with a work around. I'll do the same.
OKay . maybe i miss read all the posts. Its the HD PRO 2 thats having trouble connecting. I just updated to the 1.7.77 which allowed me to change to PAN and i made sure that PAN was selected in WMWIFIROUTER. All of the other things i left blank, and it connected right up showing a tiny cell phone icon next to my bluetooth icon. It was a very happy moment. I love finding those hidden icons.
Archos 5 Programming problem with PAN/DUN
The problem, and no one take this wrong, is that the technicians at Archos are a bunch of backwards idiots. I emailed them, explained to them that, if they would just rewrite the PAN/DUN menu to be selected previous to pairing, the problem would be solved.
My Sprint Touch Pro will do PAN bluetooth (all day long) even upside down but the idiotic software on the Archos 5 isn't smart enough to detect it so you don't get to use the PAN (which they claim is there), all you see is DUN.
I've used PDANet and gotten results but the connection is SO unstable it's just too irritating to bother.
If more people would write Archos, tell them to change the architecture of the tethering, this tablet would be more along the awesome line.
HOWEVER, because of this little quirk, some electronics magazines wrote the Archos 5 as "One of the tablets that should have NEVER been created" and it's gotten a bad rap because of the engineers.
Heck, even the whole GPS issue, they used an independent software from another company to make it work and while it DOES work, it's often slow to lock-in while standing still sometimes.
Basically i saw write in and tell them to change it. PAN is so much easier to deal with. I've had better luck with the G1 and the HERO but the problem is my current phone is using Windows Mobile 6 and they actually removed the DUN some versions ago for some reason i can't explain and the Microsoft tech couldn't tell me either.
You can hack the DUN in with registry tweaks and support software but there's no guarantee it will work.
#777 to start DUN connection?
I know I am late to this party, but on my 3rd AIT 5 (clearance at Best Buy for 150, but I got open box unit for 125) attempting this with XV6800, and now a new Imagio that tethers (Verizon) just fine with Linux/WinXP/Nokia N810.
The thing I have found with DUN is that it requires the tethered device (PC/AIT/etc) to send the #777 to connect, then authenticate with <phone number>@vzw3g.com for Id, and password of vzw. The tethering setup on the AIT appears to let you do the Id/Password part, but I see no way to get the #777 sent in the first place. Has anyone figured out that part?
TIA
RO