Hi guys,
After updating my ROM to 3.14 I have discovered a problem with the SMS-module and the phone keyboard and I wan't to know if I am the only one with this problem? (Maybe it is not a problem but just a change in how the Sense works now?!)
When typing the word showed in the message box is gibberish (e.g. "hello" shows as "gdjjm") while an actual word is only showed in the green suggestion box. Before the update the word in the message box and the green box was the same until you chose another one of the suggestions.
Thanks!
Related
Hello,
yesterday I quite successfully installed WM6 on my German SDA II. I used the 1010 ROM form this Thread: WM6 for SPV 550 and it was quite effortless. I had to restart mtty for a couple of times but finally it worked and the phone wasn't bricked. Greatest obstacle during the installation phase was to change the language from Chinese to English.
The phone works well, but since I bought it just yesterday I can't compare the OS to the previous one. To me it seems OK.
Until now I encountered some problems while using the phone:
First there is no Java included in the ROM, so I had to install and modify IBM's J9 (had a minor vribra issue with that).
Secondly, I cannot access voice commands, the phone just doesn't do anything.
And finally, t9 annoys me while writing messages. On my other smartphone, a Wm2003SE device, I can use the *-key to cycle through all input modes. This doesn't work with the 1010 ROM, instead it shows me a list of symbols in between which is annoying when you (at least try to) use correct upper and lower case writing.
Regards,
Dirk
Has anyone a solution for the t9 issue? That's a thing that really bugs me.
Dirk
read read read, it was be many times .....
Don't misunderstand me: I have t9. But on my WM2003 phone I was used to cycle through the options (abc/Abc/ABC/123/t9/T9/T9) by pressing the *-key. This still works for abc and so on but I cannot switch from t9 to T9 because then the same list of Symbols like on the #-key appears, meaning that I have to close the list, hit the key again.
Dirk
just hold "*" for the list ?
I was confused by the list. But now I just realized that I have to hit * once more, the list will go away and everything works as expected.
I also talked to the friend of whom I bought the phone and he tells me that it now works *much* faster; e. g. the camera took a while to start, now it's just a blink of the eye.
cu,
Dirk
Hi All,
Got my HTC hero and alls been well untill i got frustrated with the qwerty input! So I investigated how to swap over the settings to phonepad T9 mode, Success under the Text settings, under Chinese options. Untill i went to type a message and its gone back to qwerty !! Check my options and it still remains on the new setting. Why is this??? Also is it because my factory ROM is Singapore? If how would I get an offial HTC rom (European) to install on my device?
Thanks, Im running 2.7
Hi,
I have a problem when typing text on my x10 mini. The problem occurs when i want to change to an other word, and presses the little arrow so the drop down window appears. Or should appear, because sometimes that doesnt happen.
The box with the 2 most used words and the arrow, just dissapears and i have to deselect and select the word again to give it an other try. I sent my phone off to repair, and they replaced the whole screen, but still the same problem.
I found a few others on a danish forum with the same problem, but no solution. So i hoped that 2.1 would fix this. Debranded yesterday and installed 2.1, and still the same issue.
Is this a common (software)problem?
Or something hw related so it can be fixed?
Nobody that types on their phone?
The stock keyboard is pretty poor. I too have a similar problem selecting words.
Why don't you try another keyboard?
Sent from my E10i using XDA App
I have the EXACT same problem.
The reason why I don't switch to another keyboard is because this is the only one that I have tried that when pressed does not allow you shuffle through the other keys thus dramatically increasing my accuracy and speed.
The error only happens once per writing session.. In my case that is!
Sent from my E10i using XDA App
Thanks for the reply guys. I like the stock keyboard layout, and for me the screen is to small to use any other.
Im suppriced that its apparently a pretty common problem. Seems strange that it hasent been fixed, and the carrier and Xperia support also said that they had never heard about this problem before.
So im finally so mad about this, so threw the branded firmware back on and found the box to the phone, and off to repair once again it is. Cant see why SE dont fix it. Well okay, the one or two coders they have, has probably been busy with the 2.1 upgrade
Let me know if someone wants to know how this turns out.
Im Running the X10A with 2.1 update1 Build 2.0.a.0.504 and I've been having an issue with the keys sticking...It sounds odd I know, but when I turn the phone vertically, and start typing on it, the keys will stick, often pulling up all of the other characters (such as the A key with the ~ mark above it and so forth)
Is there a Fix for this, or is it just an internal problem with the phone? I'm about to send this one back to AT&T if it is something that can't be fixed either...
you can always install someother keyboards ( smart keyboard, HTC_IME...)
I find this problem mainly on the facebook app.
Usually its the space key that keeps skipping along the whole text box but sometimes as you say, it brings up the special character box.
I thought it was a Facebook app bug not a handset bug.
Hi all
Sorry if this is in the wrong forum but as it's a general Android issue i thought this was the best one to post in.
I have had this for a while since i have been using ICS Roms and I wondered if anyone else has had it
I use a abacus Bluetooth watch which among other things vibrates and displays when I receive a sms
Sometimes I have noticed that if I get a sms it displays on the watch but it does not appear on the phone at all, not in the message app or notification bar
But weird is that today it happened and as I saw the text on the watch but again it did not appear anywhere on the phone so I sent a reply and straight away their 2nd text appeared as normal so it's not even down to a certain contact
I've checked all settings that I can think of and it can't be anything to do with the watch software as that only displays what the phone receives
I used to have ARHD installed until I Tried Elegencia and have had the same issue with both, maybe it's a ics issue ?
I have posted this in the Rom thread but thought that this may be a wider issue
Would love to hear if anyone has the same issue
Thanks