Anyone here uses a solar charger? If so, which do you recommend?
telmoabff said:
Anyone here uses a solar charger? If so, which do you recommend?
Click to expand...
Click to collapse
I have one that came with my car.. to top up the battery I use that.. also there is one built into my sunroof..
Thinkgeek dot com has very useful phone chargers, manual and solar.
Sent from my rooted android over9000 x10i using swype on the xda app.
solar charger for laptop
telmoabff said:
Anyone here uses a solar charger? If so, which do you recommend?
Click to expand...
Click to collapse
This 16000MAH solar charger for laptop espow.com/wholesale-electric-eye-multicrystal-silicon-16000mah-solar-battery-charger-panel-for-laptop.html can be your smart choice. It just takes less than 3 hours of charging to fill it up and the internal battery provides 3 - 5 hours of run time for laptop with a full charge. It also comes with a voltage selection button to ensure full compatibility with a wide variety of electronic products, such as; MP3/MP4 players, portable DVD players, mobile phones, or any other USB powered device using the built-in 5V USB port.
solar chargers
Hi, I do own a Bicrystal solar charger, it really good one. I ordered it 6 months before from Chinabuye, they have wide collection of solar chargers and features. Its housed in a plastic case, and has an output lead to cigarette lighter plug, with a LED, which illuminates when the solar panel receives a charge.I was looking for one and i found thinkgeek is quite costlier.
Related
Already I have gone through 3 car chargers for my note 2 cheap ones and a Samsung charger none work well charging. The best one was the OEM Samsung but there must be a broken wire in there cause it charges then stops i move the cord and it works again. So I am looking for another car charger that actually charges and wont break in a month. Please post your opinions and links to the charger you refer (with best price of course ).
Here's what I use. About the best for any normal use. Had it since launch and so far so good.
http://forum.xda-developers.com/showthread.php?t=1522177
Sent from my SAMSUNG-SGH-I717 using XDA
Anyone get "MTP initialization" when using the moto rapid charger? How do you get rid of it?
Sent from my SAMSUNG-SGH-I717 using XDA
Thanks
Just ordered the car charger off Amazon for $7.00 http://www.amazon.com/gp/product/B005DCCCTW/ref=oh_details_o00_s00_i00 will try it out. I'm still interested if anyone recomends any other car chargers.
erick161 said:
Anyone get "MTP initialization" when using the moto rapid charger? How do you get rid of it?
Sent from my SAMSUNG-SGH-I717 using XDA
Click to expand...
Click to collapse
Open up the charger and solder the middle 2 pins together. Or short the data cable.
Sent from my SAMSUNG-SGH-I717 using XDA
hyukki said:
Open up the charger and solder the middle 2 pins together. Or short the data cable.
Sent from my SAMSUNG-SGH-I717 using XDA
Click to expand...
Click to collapse
Rather just buy a charger that doesn't require Modding.
Sent from my SAMSUNG-SGH-I717 using XDA
I've never had that happen with the Moto rapid charger.
Hockey37 said:
I've never had that happen with the Moto rapid charger.
Click to expand...
Click to collapse
I could have sworn it didn't happen at first. But now everytime it does that. And it charges so slow that its not even worth being charged. I've tried both ports in my car as well.
Sent from my SAMSUNG-SGH-I717 using XDA
I've found that stock micro usb cable or any other micro cable combined with 2.1Amp(ipad) car charger worked best (faster/rapid charge)
icce007 said:
I've found that stock micro usb cable or any other micro cable combined with 2.1Amp(ipad) car charger worked best (faster/rapid charge)
Click to expand...
Click to collapse
I would recommend this charger definitely. Charges 2 smartphones, 1 iPad plus my note, or just my note.
http://www.amzn.com/gp/product/B006...=1789&creative=390957&creativeASIN=B006SU0SX0
hyukki said:
Open up the charger and solder the middle 2 pins together. Or short the data cable.
Sent from my SAMSUNG-SGH-I717 using XDA
Click to expand...
Click to collapse
This really is the best option (but I WOULD NOT SHORT THE CABLE). I downloaded an app that measures incoming amps and tried several car chargers. Most of them only output .5 amps. You are better off buying a car charger for the iPad (2.1 amps) or modding a normal charger as suggested and using any data cable.
I use a modded Power-Bolt charger with a retractable USB cable. This combination takes up the least amount of space and rapid charges my phone even if I'm using Google Navigation at the same time.
The Note comes with a normal USB cable and a shorted wall charger. The Note knows to rapid charge when it senses the short.
Rather than butchering either of my Kensington PowerBolts ......yet I chose to use Current Widget to measure output of basic Samsung microUsb car charger. Depending on battery level it registered over .9A at times yet on 2 hour ride last week w/ Google Maps it wasn't enough. I use ProClip device mounts, but for the hell of it bought Samsung's car mount today to see output of its included charger. Top measurement on 80%+ battery was 1.092A ?????? I'll let battery drain down and report back....
¢ via SGH-i717
I actually just use a cigararette lighter/USB converter and use a USB/micro USB cable and it charges just fine.
Sent from my SAMSUNG-SGH-I717 using XDA
bluetoothless said:
Rather than butchering either of my Kensington PowerBolts ......
Click to expand...
Click to collapse
If you do decide to butcher your PowerBolt, you won't be dissappointed. I'm getting over 1 amp now regardless of battery life or Navigation. It's a bit tricky with the PowerBolt Duo, but you cannot tell it's been modded.
You have to peel off the top sticker, then unscrew the top. I did not have a torx driver that was small enough, so I just drilled out the torx screws. Then you remove the top, disassemble the charger, and solder the two inner USB leads on the 1 amp side only. Reassemble the charger, add a drop of glue to attach the top, and put the sticker back on. Now I can charge my iPad3 and my Galaxy Note at the same time, while they're running.
I own both the single 2.1A port and the Duo 3.1A. What are you getting out of 2.1 ports? I don't remember getting over .992A with it. Am I wrong to expect closer to 2.1A?
I didn't look under decal yet, but own mini torx set.
Even though I own ProClip mount I bought Samsung Car Dock on sale at CompUsa to see what charging output the included charger produced and Current Widget measured 1.059A while battery was at 73%. It's the first time I remember getting over 1.0A
When ever I drive, I have my phone hooked up to my Escort Red Line radar detector and my car's stereo via bluetooth (both). In order for me to use the radar detector effective, I need to have GPS and Blueooth enabled. This is a HUGE SUPER OMG battery drainer for my amaze. 20 minutes drive kills about 35% of the phone's power. My radar detector offers a slot to charge my phone BUT it still drains, not enough juice flowing in. Someone said it is because it's probably a .5amp.
So I am running a extension from the 12v lighter that's in the trunk to the front of my car. Amazon has a generic 2.1amp for 3 bucks.
http://www.amazon.com/Premium-Heavy...121&sr=8-1&keywords=htc+amaze+car+charger+amp
But on ebay, I found the original HTC car charger for 15 bucks which is a 1amp.
http://www.ebay.com/itm/HTC-Amaze-4...918506?pt=PDA_Accessories&hash=item27c867022a
What do you guys recommend? My logic says go for the 2.1amp, the phone will draw as much as it needs from it.
The 1amp.
Anything higher you'll damage the phone or the battery.
A wall plug power supply or a usb supply is 5.0v/1amp.
The 2.1 amp is probably 1 amp per port. Although it does not seem to specify.
F9zSlavik said:
What do you guys recommend? My logic says go for the 2.1amp, the phone will draw as much as it needs from it.
Click to expand...
Click to collapse
Right!:good:
---------- Post added at 09:23 AM ---------- Previous post was at 08:41 AM ----------
soundping said:
The 1amp.
Anything higher you'll damage the phone or the battery.
A wall plug power supply or a usb supply is 5.0v/1amp.
Click to expand...
Click to collapse
That means a higher capacity battery (more current NOT MORE VOLTAGE) will damage the phone?!!!!
Totally wrong!
A higher current will not damage the phone. A higher voltage will do it!
Please do not mix the current with voltage!
Voltage is same 5 Volts (±5%) for these “USB like” applications (1A or 2.1A power supply our case )They use USB socket/connector but usually only pin 1 and 4 (+ and-)
Regular computer USB port can supply max 0.5-0.9 A depending on version.
For battery charging devices the current can go to 5A.
Higher voltage will trip a warning window telling you to disconnect and use official HTC equipment.
The phone monitors input voltage to protect the equipment.
nyc_tdi said:
That means a higher capacity battery (more current NOT MORE VOLTAGE) will damage the phone?!!!!
Totally wrong!
A higher current will not damage the phone. A higher voltage will do it!
Please do not mix the current with voltage!
Voltage is same 5 Volts (±5%) for these “USB like” applications (1A or 2.1A power supply our case )They use USB socket/connector but usually only pin 1 and 4 (+ and-)
Regular computer USB port can supply max 0.5-0.9 A depending on version.
For battery charging devices the current can go to 5A.
Click to expand...
Click to collapse
and to add to that... unless you take the charger apart and short pins 2 and 3, it will only ever draw 500mA, as it assumes that it is hooked up to a regular powered USB port... I have bought multiple car charger usb adapters, and I have taken all of them apart and soldered the 2nd and 3rd pins together... otherwise charge time = forever, and sometimes it won't even charge if you have wifi or data/gps/bluetooth all going at once...
I recently got an Amaze and am generally happy with it. The biggest problem I have right now is finding the right car charger for it because the car charger I previously used (a 1A monoprice car charger) doesn't give it enough charge. I have been reading through the forums and some has been saying that if the charger is not working properly, it will recognize it as charging via USB rather than AC. In my case, the phone seems to be reading it as charging through AC, but there still doesn't seem to be enough current going through it. The phone will only charge if NOTHING is going on (i.e. screen's off, no GPS, etc.). I've been using CoPilot GPS and it draws the battery like crazy. Anyone has any idea as to which car charger would work properly with the Amaze such that I'll be able to charge (or at least maintain the charge) while using it as a GPS? Do I need to go up to a 2.1A charger?
I would look for a 4-5 star rated 2.1a car charger on Amazon.
Just read through the comments and feedback and you'll find one that's right for you.
I prefer the USB charger base itself and then using the OEM cable that came with the Amaze.
It seems to charge faster with that cable, at least to me anyway.
Remember though if it's rated 2.1a but has two USB slots that 2.1a will be cut in half if used to charge two different devices.
Hope this helps.
I couldve sworn we talked about this months ago. Let me see if I can find the thread.
nguyendqh said:
I would look for a 4-5 star rated 2.1a car charger on Amazon.
Just read through the comments and feedback and you'll find one that's right for you.
I prefer the USB charger base itself and then using the OEM cable that came with the Amaze.
It seems to charge faster with that cable, at least to me anyway.
Remember though if it's rated 2.1a but has two USB slots that 2.1a will be cut in half if used to charge two different devices.
Hope this helps.
Click to expand...
Click to collapse
you won't get the full 2.1a unless you usee a charge only cable or modify the charger as I stated above...
I ended up getting a 2.1A car charger and a USB charge only cable, and it's working perfectly. When I have the screen on full brightness and doing navigation with Co-Pilot GPS, my phone's no longer losing charge and is actually charging. The combo also works with my tablet as well.
blast0id said:
and to add to that... unless you take the charger apart and short pins 2 and 3, it will only ever draw 500mA, as it assumes that it is hooked up to a regular powered USB port... I have bought multiple car charger usb adapters, and I have taken all of them apart and soldered the 2nd and 3rd pins together... otherwise charge time = forever, and sometimes it won't even charge if you have wifi or data/gps/bluetooth all going at once...
Click to expand...
Click to collapse
This is damn helpful! So THAT is why when driving and using gps or whatnot I would always lose more battery even on charger.. So basically I can just solder the middle 2 pins together to trick it into thinking it is being powered like a home charger? No chance it will hurt anything I assume?
Silentbtdeadly said:
This is damn helpful! So THAT is why when driving and using gps or whatnot I would always lose more battery even on charger.. So basically I can just solder the middle 2 pins together to trick it into thinking it is being powered like a home charger? No chance it will hurt anything I assume?
Click to expand...
Click to collapse
I have done this to every single one of my USB car chargers... not a single issue...
Since I travel a lot, I prefer the detachable design of car chargers like this Satechi USB Car Charger and the
Palm Pre USB Charger. Although both of these chargers and many others that I have are rated at 1000+ mA, they all charge my phone very inconsistently. Sometimes while charging, my phone continues to drain when using GPS navigation and other times it just charges very, very slowly. However, the OEM Sprint charger usually produces better results even though it only puts out 850 mA. I've tested these chargers in different rental cars and the results are similar so I don't think it depends on the make and model of the car being used.
Any reason why the Sprint charger works better than all others?
Are you using a detachable USB car charger that always charges well while using GPS navigation? If so, which one?
sjamie said:
Since I travel a lot, I prefer the detachable design of car chargers like this Satechi USB Car Charger and the
Palm Pre USB Charger. Although both of these chargers and many others that I have are rated at 1000+ mA, they all charge my phone very inconsistently. Sometimes while charging, my phone continues to drain when using GPS navigation and other times it just charges very, very slowly. However, the OEM Sprint charger usually produces better results even though it only puts out 850 mA. I've tested these chargers in different rental cars and the results are similar so I don't think it depends on the make and model of the car being used.
Any reason why the Sprint charger works better than all others?
Are you using a detachable USB car charger that always charges well while using GPS navigation? If so, which one?
Click to expand...
Click to collapse
I went straight to amazon.com and purchased several OEM Motorola Wall chargers and the rapid car charger. To me the "portable" chargers that you linked to are cool if you are a person who needs to charge different types of USB devices but our phone uses a standard microusb adapter so the Motorola Rapid Car Charger can be used for many devices. I recommend you get one: http://www.amazon.com/Motorola-Vehicle-Adapter-micro-USB-Charger/dp/B000S5Q9CA
I use this: http://www.farmandfleet.com/products/737964-duracell-no-tips-mini-usb-car-charger.html#.UI15iDgpCSw. Only cost $8 at staples and charges like you're not doing anything while using navigation
Sent from my MB855 using xda app-developers app
sub2k1 said:
I went straight to amazon.com and purchased several OEM Motorola Wall chargers and the rapid car charger. To me the "portable" chargers that you linked to are cool if you are a person who needs to charge different types of USB devices but our phone uses a standard microusb adapter so the Motorola Rapid Car Charger can be used for many devices. I recommend you get one: http://www.amazon.com/Motorola-Vehicle-Adapter-micro-USB-Charger/dp/B000S5Q9CA
Click to expand...
Click to collapse
Yes, i have that one too but I'm trying to avoid using a charger with a spiral cord. For me, it doesn't pack as well as the detachable type.
JVital2013 said:
I use this: http://www.farmandfleet.com/products/737964-duracell-no-tips-mini-usb-car-charger.html#.UI15iDgpCSw. Only cost $8 at staples and charges like you're not doing anything while using navigation
Sent from my MB855 using xda app-developers app
Click to expand...
Click to collapse
Thank you, I couldn't find it at Staples but I did find it here at OfficeMax. Placing my order now...
Also, I found this review about a different product (which I'm also ordering) that explains the problem with Androids charging slowly with most car chargers. It looks like this charge only cable (which I'm also ordering) may allow all USB chargers to charge faster!
Device won't charge off of my portable ISound charger while on the go.
I use the ISound for my Samsung, Nexus, networks etc no problem.
I'm on the go all day and it's a necessity for my mobile devices.
Others have the same with portable chargers?
rockky said:
Device won't charge off of my portable ISound charger while on the go.
I use the ISound for my Samsung, Nexus, networks etc no problem.
I'm on the go all day and it's a necessity for my mobile devices.
Others have the same with portable chargers?
Click to expand...
Click to collapse
I'm not very familiar with the iSound charger, does it provide a high enough Amp output?
When I got my Galaxy Tab 10.1v a couple of years ago, I bought some adapters that feature a resistor and a swap some pins around to ensure the device goes into charge mode and not data mode when plugged into a PC. The resistor enables a higher Amp output than you get from a normal USB port. I've checked ebay recently and found that there are even better adapters out now than what I bought in 2011, much more low profile.
Maybe one of these could help?
RaindancerAU said:
I'm not very familiar with the iSound charger, does it provide a high enough Amp output?
When I got my Galaxy Tab 10.1v a couple of years ago, I bought some adapters that feature a resistor and a swap some pins around to ensure the device goes into charge mode and not data mode when plugged into a PC. The resistor enables a higher Amp output than you get from a normal USB port. I've checked ebay recently and found that there are even better adapters out now than what I bought in 2011, much more low profile.
Maybe one of these could help?
Click to expand...
Click to collapse
Thanks
rockky said:
Thanks
Click to expand...
Click to collapse
Had a quick look just now - found the right combo of search terms to use;
http://www.ebay.com/sch/i.html?_trk...ter+Adapter+Charger+tablet&_sacat=0&_from=R40
Hope that helps.
Thanks for your reply and link:
http://www.ebay.com/sch/i.html?_trk...verter+Adapter+Charger+tablet&_sacat=0&_from=
To understand : the Ultra won't charge when I put it's USB cable into that Isound mobile Charger.
Are these like, extentions that I'd add on to my USB cable to make it charge in said charger?!
Thanks for your help
the output opportunity of your mobile power bank to produce the current with enough power Is significant . As example u can see my mobile Iconbit charger which produces two current opportunities: 2.1 A and 1A.
The first allows to charge my phone very fast, the second allows not to lose phone battery chargе during walking with maps enabled.
So, may be your's power bank is not quite good to output good current. may be it was very good in past but battery have lost the capacity and opportunity to produce current.
Also I've throwd to the garbage a lot of adapters which had lost their opportunity to put goodie high current, a lot of famous brands also. During the year and half of Note 1 I've changed five batteries and three wall chargers. some changes I have bought to replace did not charge my phone.
Sent from my C6802 using xda app-developers app
Sergey_TSA said:
the output opportunity of your mobile power bank to produce the current with enough power Is significant . As example u can see my mobile Iconbit charger which produces two current opportunities: 2.1 A and 1A.
The first allows to charge my phone very fast, the second allows not to lose phone battery chargе during walking with maps enabled.
So, may be your's power bank is not quite good to output good current. may be it was very good in past but battery have lost the capacity and opportunity to produce current.
Also I've throwd to the garbage a lot of adapters which had lost their opportunity to put goodie high current, a lot of famous brands also. During the year and half of Note 1 I've changed five batteries and three wall chargers. some changes I have bought to replace did not charge my phone.
Sent from my C6802 using xda app-developers app
Click to expand...
Click to collapse
Some good points here - particularly about charges and cables to degrade and lose their capability to provide a quality current - I've had to dispose of a few cables and chargers as well.
Still, the adapters that discussed earlier can help to a certain extent.
So I have started using an application on my Note 3 that is pretty much a battery muncher, GPS, Data, Processing, Graphics the works. I am looking into some options for extending battery life with some accessories. I was originally planning on getting 2 batteries with a charger but I'd like to also consider a portable battery pack so I can share the power with friends. What I am curious about is whether or not the charger can support the 900ma/h charging rate. I was wondering if the standard usb port can support the power as long as its a micro usb 3.0 connector. To simplify I just need to know that if I have type A usb connector to a micro usb 3.0 connector can I charge my phone at the fastest rate. And does the output of the charger have to be at least 1A?
Xproplayer said:
So I have started using an application on my Note 3 that is pretty much a battery muncher, GPS, Data, Processing, Graphics the works. I am looking into some options for extending battery life with some accessories. I was originally planning on getting 2 batteries with a charger but I'd like to also consider a portable battery pack so I can share the power with friends. What I am curious about is whether or not the charger can support the 900ma/h charging rate. I was wondering if the standard usb port can support the power as long as its a micro usb 3.0 connector. To simplify I just need to know that if I have type A usb connector to a micro usb 3.0 connector can I charge my phone at the fastest rate. And does the output of the charger have to be at least 1A?
Click to expand...
Click to collapse
I own two battery packs. Both are from a company called PowerGen and I picked them up on Amazon.com. One pack is 12,000mah the other is 5,200mah. You just plug your regular charging cable into one of the standard USB jacks in the battery pack and turn it on. The larger pack has a 2A jack and will charge at a fast rate. When I was using the Note 2, I used a special heavy duty charging cable that I picked up on Amazon.com and that cable allowed the Note 2 to charge at a faster rate. I have not tried to use the cable on the Note 3, but I might soon. I feel that battery packs are a much more flexible approach than extra batteries. You can get more than one recharge on the battery pack. I addition, I use the battery packs with a large number of other devices. If you get a new device, the battery pack can still be used.
Xproplayer said:
So I have started using an application on my Note 3 that is pretty much a battery muncher, GPS, Data, Processing, Graphics the works. I am looking into some options for extending battery life with some accessories. I was originally planning on getting 2 batteries with a charger but I'd like to also consider a portable battery pack so I can share the power with friends. What I am curious about is whether or not the charger can support the 900ma/h charging rate. I was wondering if the standard usb port can support the power as long as its a micro usb 3.0 connector. To simplify I just need to know that if I have type A usb connector to a micro usb 3.0 connector can I charge my phone at the fastest rate. And does the output of the charger have to be at least 1A?
Click to expand...
Click to collapse
YUp. I have an old anker external battery with 1a and 2a ports, the 2a port charges my note 3 at 1800. To be fair it is picky over the cable used (a decent quality non ribbon cable) and the temperature of the phone and battery (thermal throttling which is perfectly sensible to avoid cooking the battery and phone). It appears that there is a lot of variables that can potentially screw up a decent charge rate for some folks some of the time. My experience with the anker battery pack has been excellent, even nearly 2 years later after daily use.
Personally I am getting a little tired of the whole charging the battery twice a day so I am looking at a larger battery. The zerolemon allegedly affects signal quality, the 6400mah ones from elsewhere seem to come with shocking cases so I am still looking. It would be great if samsung came out with an extended battery and case. You think they would be after that money.
richym82 said:
YUp. I have an old anker external battery with 1a and 2a ports, the 2a port charges my note 3 at 1800. To be fair it is picky over the cable used (a decent quality non ribbon cable) and the temperature of the phone and battery (thermal throttling which is perfectly sensible to avoid cooking the battery and phone). It appears that there is a lot of variables that can potentially screw up a decent charge rate for some folks some of the time. My experience with the anker battery pack has been excellent, even nearly 2 years later after daily use.
Personally I am getting a little tired of the whole charging the battery twice a day so I am looking at a larger battery. The zerolemon allegedly affects signal quality, the 6400mah ones from elsewhere seem to come with shocking cases so I am still looking. It would be great if samsung came out with an extended battery and case. You think they would be after that money.
Click to expand...
Click to collapse
How do you check what the charging rate is And id like a cable that bends with no resistance unlike the factory cable .
Theres a free app "galaxy charging current lite", seems to be pretty accurate compared to time taken to charge.
As for the cables. I checked quite a few cables and I noticed that the higher quality cables, more expensive, thicker, better connectors etc were far more likely to charge at a higher rate. I would not be shocked if some of the cheaper cables, especially the flat noodle types were skimping either in the cables or the shielding. I could be entirely wrong of course but I did attempt to limit any other variables like being in airplane mode, low room temp, battery not near fully charged.
Don't get me wrong, I find it a huge PITA using a stiffer cable but that is why I am looking for an extended battery that doesn't leave me with the worlds worst case or stuff up the signal.
Can anyone recommend a good car charger and a battery pack around 10,000 mah
Xproplayer said:
Can anyone recommend a good car charger and a battery pack around 10,000 mah
Click to expand...
Click to collapse
I just posted the car charger I am using with the charging cable that provides a 1800 mA charging rate on the note 3 http://forum.xda-developers.com/showthread.php?p=48626737
I just won a bid for a 12000 mah floureon portable charger 12.99 on ebay free shipping should be here today
Sent from my SM-N900T using Tapatalk
richym82 said:
YUp. I have an old anker external battery with 1a and 2a ports, the 2a port charges my note 3 at 1800. To be fair it is picky over the cable used (a decent quality non ribbon cable) and the temperature of the phone and battery (thermal throttling which is perfectly sensible to avoid cooking the battery and phone). It appears that there is a lot of variables that can potentially screw up a decent charge rate for some folks some of the time. My experience with the anker battery pack has been excellent, even nearly 2 years later after daily use.
Personally I am getting a little tired of the whole charging the battery twice a day so I am looking at a larger battery. The zerolemon allegedly affects signal quality, the 6400mah ones from elsewhere seem to come with shocking cases so I am still looking. It would be great if samsung came out with an extended battery and case. You think they would be after that money.
Click to expand...
Click to collapse
I bought a floureon 12000 portable battery I was wondering what the 1 and 2 usb are for thanks for clarifying is it bad if I use the 2.a every time I charge fast will that effect my phone heating up etc?
Sent from my SM-N900T using Tapatalk
2 a is not bad. That is what the oem charger is. Depending on how much juice the app is using 1a won't cut it.
papabear said:
2 a is not bad. That is what the oem charger is. Depending on how much juice the app is using 1a won't cut it.
Click to expand...
Click to collapse
So what's 1.a for?
Sent from my SM-N900T using Tapatalk
troyd28 said:
So what's 1.a for?
Click to expand...
Click to collapse
... for devices that only need 1A or less....
I use myCharge Amp 6000xt when I'm travelling. Plugs right into any US outlet to rechage, and can charge at up to 2.1A, with 3 USB ports available (1200mA typical charge rate on my Note 3 using a generic USB cable, according to my charge current app).
troyd28 said:
So what's 1.a for?
Sent from my SM-N900T using Tapatalk
Click to expand...
Click to collapse
Most phones only come with a 1A charger, while most tablets (and Note 3) come with a 2-2.1A charger. I have an Power Bank battery with a 1A port and a 2.1A port. The 2. 1A port is the only one I use to charge my Note 3, and I use the 1A port for other phones and/or my blue tooth headset.
SwiftKey'ed from my White Sprint Note 3 via XDA Premium