X10Flash for 2.1 | Version: alpha - XPERIA X10 Android Development

Hi,
i recompiled the X10flash for the coming update.
I think now it SHOULD work, but because i can't know it's an alpha release.
This doesn't include anything, just the pure flasher.
Also i added directly the DevID64 to it and a Option to choose into batchfile.
This is what you need to use it after the update is here:
1.) Decrypted 2.1 Firmware including these files:
- amss_fs.sin
- cache.sin
- amss.sin
- fota0.sin
- fota1.sin
- dsp1.sin
- kernel.sin
- system.sin
- userdata.sin
2.) Because i don't know if SE releases a new loader.sin with the new firmware you will need a loader.sin which works for this. I think that they will release a new one. But if not i have uploaded the 1.6 loader.sin.
So let's wait. If someone gets the update before me, just decrypt upload and drop me a msg.
Regards
Bin4ry

I just wake up... man you are quic as .light thx
Sent from my X10i using XDA App

Hehe, i'm giving my best
Regards
Bin4ry

ya sure man
yaa sure man we will upload it if i get update soon

So now it doesn't matter which FW version we have on our phones ? We can just simply flash the decrypted 2.1 ROM once someone uploads it?

Desarth said:
So now it doesn't matter which FW version we have on our phones ? We can just simply flash the decrypted 2.1 ROM once someone uploads it?
Click to expand...
Click to collapse
Sure hope that's the case

Thanks Bin4ry just out of interest what's the difference compared to the old version for flashing 1.6?
Edit: had a look myself - just the way the loader is written to the handset

Do I need your "X10Flash for 2.1" for flashing the nordic eclair version? I have already installed the nordic flash tool and my phone is now "nordic combined"!!!

hey bin4ry i flashed my x10a with your nordic flash tool. So when the update comes out should use pc companion or should i use your flash tool?
Sent from my X10i using XDA App

@Bin4ry
How can I use your flasher (2.1) and place inside the .sin files (12 files) from your nordic flasher (again ) ?
I just placed the files (12 .sin files) but doesn't work
Why do need what? I use 64bit and 32bit pcs and this method is easily fom me (not need copy - replace DevID folder each time)
Code:
Wipe Userdata? (y/n): n
Do you have a 32-Bit System? (y/n): n
please connect Xperia in flash mode.
Press any key to continue . . .
31 ╧ΆΪ 2010 2:24:15 ΉΉ X10flash main
INFO: start
31 ╧ΆΪ 2010 2:24:15 ΉΉ X10flash readReply
INFO: <<< cmd=1,flags=1,length=46
31 ╧ΆΪ 2010 2:24:15 ΉΉ X10flash testPluged
INFO: <<<VER="R8A013";DATE="20100119";TIME="17:24:00";
31 ╧ΆΪ 2010 2:24:15 ΉΉ X10flash writeCmd
INFO: write(cmd=1) (finish)
31 ╧ΆΪ 2010 2:24:15 ΉΉ X10flash readReply
INFO: <<< cmd=1,flags=1,length=586
31 ╧ΆΪ 2010 2:24:15 ΉΉ X10flash testCmd01
INFO: <<<PROT_VER="01";DATE="20100119";TIME="17:24:00";VER="R8A013";UNIQUE_DEV_I
D="49BAAF96E56A023E481D20C7FC3A7B90BFA82934";CXC="1226-2253";TYPE="S1_EROM";SEC_
LOCK_STATUS="LOCKED";HASH_PUB_KEY="00000000000000000000000000000000";EROM_AID="0
001";LOADER_AID="0001";SW_AID="0001";CUST_AID="0001";SIM_LOCK_AID="0001";IMEI="3
5941903007053";MSN="CB511G7DH9";SIN_VER="0001";SIMLOCK_TAMP="";AID_TAMP="NOT_TAM
PERED";LOADER_ROOT="S1_Loader_Root_f851";EROM_ROOT="S1_EROM_Root_b15e";SW_ROOT="
S1_SW_Root_ac12";CUST_ROOT="S1_Cust_Root_5789";SIM_LOCK_ROOT="S1_SL_Root_f20d";H
W_CONF_ROOT="S1_HWConf_Root_ee5d";
31 ╧ΆΪ 2010 2:24:15 ΉΉ X10flash writeCmd
INFO: write(cmd=9) (finish)
31 ╧ΆΪ 2010 2:24:15 ΉΉ X10flash readReply
INFO: <<< cmd=9,flags=1,length=0
31 ╧ΆΪ 2010 2:24:15 ΉΉ X10flash writeCmd
INFO: write(cmd=10) (finish)
31 ╧ΆΪ 2010 2:24:15 ΉΉ X10flash readReply
INFO: <<< cmd=10,flags=1,length=0
31 ╧ΆΪ 2010 2:24:15 ΉΉ X10flash writeCmd
INFO: write(cmd=6) (finish)
31 ╧ΆΪ 2010 2:24:15 ΉΉ X10flash readReply
INFO: <<< cmd=6,flags=0,length=0
Exception in thread "main" java.lang.NullPointerException
at java.lang.String.<init>(Unknown Source)
at X10flash.testPluged(X10flash.java:103)
at X10flash.run2(X10flash.java:397)
at X10flash.run(X10flash.java:409)
at X10flash.main(X10flash.java:447)
Press any key to continue . . .
ps: System Variables (for 64bit) placed succesfully!

I don't get it. Why did you do that ? In the Nordic-Package the X10flash jar is inside.
The Version postet here should work with 2.1 but the Nordic Package is still 1.6.
That mix is odd.
Try with the x10flash of the Nordic_Flasher Package again as it worked for many these days.

@Lef.teris, although in theory this new version should work. It appears there is an error somewhere. As pietropizzi suggested - use the older version for now till Bin4ry has chance to look

pietropizzi said:
I don't get it. Why did you do that ? In the Nordic-Package the X10flash jar is inside.
The Version postet here should work with 2.1 but the Nordic Package is still 1.6.
That mix is odd.
Try with the x10flash of the Nordic_Flasher Package again as it worked for many these days.
Click to expand...
Click to collapse
Ok Sorry I believed that X10flash.jar it was work for all edition 1.6, 2.1.
I needed for a generic flasher who I can put the .sin files and flash my X10 with my X64 and X86 PCs
I replaced the .bat file, DevID folders and it works fine
Correct me if make any wrong!

gud work dude keep it up

@Lef.teris
I understand that the 32-64 bit thing makes life easier. From what I see the changes in the Flasher package are related to the jar file.
So if you're brave you can mix the new 2.1 package with the 1.6 jar file from the Nordic package.
So you may get the platform-independed devcon from menue and the right jar for the 1.6 Nordic sin's.
Not tested, but may work !
EDIT: I see you answered yourself ! Good work !!

Lef.teris said:
Ok Sorry I believed that X10flash.jar it was work for all edition 1.6, 2.1.
I needed for a generic flasher who I can put the .sin files and flash my X10 with my X64 and X86 PCs
I replaced the .bat file, DevID folders and it works fine
Correct me if make any wrong!
Click to expand...
Click to collapse
the jar file does the magic. It is adapted to the new 2.1 Structure!
So if you want the Trick with 64 and 32 bit. you can take all except of the JAR file.
Take the jar from an old flasher.
Mixing the new jar with old firmware won't work!
Regards
Bin4ry

Thanks pietropizzi & Bin4ry!!!
I understand now!

thanks guys

It is 5 p.m Can we assume that it's evening ? Hm, SE ?

I guess they'll wait till 11pm
to the very end of october

Related

Yellow exclamation mark! Tried all method but failed! Help PLS!!!

I bricked my X10 (so-01b) and got Yellow exclamation mark after I tried to debrand it by SEUS.
After that, I tried almost all the methods posted on the website.
1. Using the X10flash tools including unbricked method and root method(first step).
It seems flash is working, however the flash procedure last only around 3 minutes not 5 minutes as most people mentioned. It also ended up with a "test" which means the flashing is completed without any error.
However, after removing the cable, rebooting the phone, Yellow exclamation mark is still there.
2. Method of replacing the Java file into the plugins folder and adding x10a~~ files into the folder of the Update Service of the SESU, also deleting the db folder before flashing.
Restore/repair by SEUS, downloading and flashing was running smoothly and ended up with flashing successfully.
However, after removing the cable, rebooting the phone, Yellow exclamation mark is still there.
3. Deleted the SEUS , re-installed, and changed another brand new cable.Tried the method 2 mentioned above.
However, the result is the same. Failed.
4. Using Omnious. Flashing end up with "Failed" and an error code returned, which you can take a look as following. Result is the same as above three.after removing the cable, rebooting the phone, Yellow exclamation mark is still there.
Code:
Action journal
22:29:08 Flash
22:29:08 Allows to change languages supported by the phone and upgrade its firmware.
22:29:08 Operating system: Microsoft Windows XP Professional Service Pack 3 (build 2600)
22:29:08 Application version: 0.07.2279 (beta)
22:29:08 . The action name is 'Flash'
22:29:08 Selected phone type: Xperia™ X10
22:29:08 i Instructions
22:29:08 i 1. Make sure the phone battery is charged to at least 50%.
22:29:08 i 2. Switch off the phone!
22:29:08 i 3. Remove the phone battery and wait at least 5 seconds before reinserting it!
22:29:08 i 4. Press and hold the return back button, then connect the cable to the phone!
22:29:08 . The action started waiting for the user
22:29:25 . The action finished waiting for the user
22:29:25 Connecting via SEMC USB Flash Device (USB3)...
22:29:25 Device driver version: 2.2.0.5
22:29:25 Detected chipset: QSD8250
22:29:25 Boot mode: EROM
22:29:25 IMEI: [email protected]@@
22:29:25 Sending loader...
22:29:26 Establishing connection to the server...
22:29:29 Receiving news...
22:29:34 i No news
22:29:34 Actual credit: 0.00
22:29:40 Writing file phone.zip...
22:30:18 Writing file X10i_GENERIC_1234_8465R8A_R1FB001.zip...
22:33:38 e Failed!
22:33:38 . The action entered shutdown phase
22:33:38 . The action reported failure
Error code
# E39CDD9F86C3082E
Error details
---
61 C6 C0 A4 65 CB CD 00 FF 08 E1 72 F3 9F B5 AE
13 9B E7 8D E5 86 63 FA 78 BD E4 7E ED 5F 85 68
09 52 D0 4B 3E 18 6D E0 61 94 3A D6 3F 7D 06 ED
11 DB BB C5 11 03 FE 12 A2 17 E5 DB 4F B0 1E 0D
C5 5C E6 DF 47 8B A0 93 02 E4 6C 19 80 4D 59 91
46 C1 3B 15 F6 69 01 6B CA 64 A3 13 2E 26 7A 7C
7E AD 9A 9E 1D EB 00 E8 80 F0 7A 96 0F 25 D0 BA
D5 FD 93 6D 4B 5B 30 D9 6C D7 4D 92 B4 C0 04 64
F7 56 66 50 2A AA 3B E5 F3 13 07 8D EE A3 41 61
48 50 E9 72 04 6F 71 F5 55 D4 0A 0C 6D 2F 05 E8
77 58 E8 34 2A 17 BD A1 E1 9A FF 0A ED 48 D5 09
C7 38 25 15 95 C7 43 B0 6F 20 0C E7 BD 5C 0B 29
17 8E 39 EE F3 F9 7F 69 EF 5B A1 DC B3 74 21 FF
19 DE A7 ED 25 46 5D DE 0F B6 8F 34 FD F2 BB 58
E7 3F D9 C4 D5 24 2D E1 A1 DA BF 44 5B 79 BB 34
F9 22 57 42 85 66 03 14 99 C1 7C 7F
---
I can show you my hardware infomation identified by Omnious.
Code:
Action journal
23:48:43 Identify
23:48:43 Shows detailed information about the connected phone.
23:48:43 Operating system: Microsoft Windows XP Professional Service Pack 3 (build 2600)
23:48:43 Application version: 0.07.2279 (beta)
23:48:43 . The action name is 'Identification'
23:48:43 Selected phone type: Xperia™ X10
23:48:43 Selected connection method: USB EROM
23:48:43 i Instructions
23:48:43 i 1. Make sure the phone battery is charged to at least 50%.
23:48:43 i 2. Switch off the phone!
23:48:43 i 3. Remove the phone battery and wait at least 5 seconds before reinserting it!
23:48:43 i 4. Press and hold the return back button, then connect the cable to the phone!
23:48:43 . The action started waiting for the user
23:48:50 . The action finished waiting for the user
23:48:50 Connecting via SEMC USB Flash Device (USB3)...
23:48:50 Device driver version: 2.2.0.5
23:48:50 Detected chipset: QSD8250
23:48:50 Boot mode: EROM
23:48:50 EROM version: 1226-2253 R8A013
23:48:50 IMEI: [email protected]@@
23:48:50 Device ID: 7E2914576285FCBDDB99FD73DE3CC610FDEF4539
23:48:50 Minimum loader AID: 0001
23:48:50 Minimum software AID: 0001
23:48:50 Minimum EROM AID: 0001
23:48:50 Minimum customization AID: 0001
23:48:50 Minimum simlock AID: 0001
23:48:50 Serial number: CB511JJNU6
23:48:50 Color: Red SEMC
23:48:50 Simlock state:
23:48:50 Phone model (from TA): SO-01B
23:48:50 Current CXC (from TA): 1227-4612_R1EA018
23:48:50 Current CDA (from TA): 1233-7397_R16A
23:48:50 Current FS (from TA): 1227-4607_R1EA018
23:48:50 Sending loader...
23:48:51 Waiting for loader response...
23:48:52 Flash chip ID: 002C-00B3
23:48:52 Turning off the phone...
23:48:54 i Please disconnect battery and cable from the phone!
23:48:54 s Successfully done.
23:48:54 . The action entered shutdown phase
23:48:54 . The action reported success
Additional details
---
2C B5 7E 53 CE E0 A6 3F 3C 23 1E 6B 18 79 5E 29
34 FB 48 D0 90 2F EA 9F 2C DC 52 9B F8 29 3A 1E
72 19 76 4D 80 8F 86 61 E4 89 80 CF 76 E9
---
I feel really sad and frustrated, seems most of the guys here can solve the Yellow exclamation mark issue with one of the 4 methods I have tried. I really need your help!
Thanks a million in advance!
I had this yesterday, just connect now phone to seus and repair it. It helped and now everything is working
Sent from my X10i using XDA App
maxld said:
I had this yesterday, just connect now phone to seus and repair it. It helped and now everything is working
Sent from my X10i using XDA App
Click to expand...
Click to collapse
Tried at the very beginning, but failed......
Strange, does it connect in bootloader mode?
Sent from my X10i using XDA App
maxld said:
Strange, does it connect in bootloader mode?
Sent from my X10i using XDA App
Click to expand...
Click to collapse
Sure, every methods require the x10 connected in flash mode.
Remove battery, wait 15 minutes. Put battery in but don't turn on, just enter straight into bootloader mode when you need to.
Clear out content in SEUS folder and start over again.
Good luck!
So is your phone originally the SO-01B (docomo)? If so, then you should either be using SO-01B files or X10i (NOT X10a).
Can you try reflashing to SO-01B firmware to make sure that there isn't anything wrong with your phone? Just run step1 from the following (this is the original root package, which used docomo firmware). Don't run any other steps.
ROOT_F2v1.rar (borrowed from [GUIDE] Root your X10 R2BA023 !)
For the SEUS method, why did you replace the java files? That's only for decrypting ROMs, not for flashing your phone. Also, you should be using X10i files.
For the Omnius method, did you put the files in the correct order? Application should be X10i_GENERIC_1234_8465R8A_R1FB001.zip (large file, ~100MB) and Customization should be phone.zip (small file, ~15MB). Since you have the SO-01B, you could also try these files:
SO-R1EA025-DEK.rar (borrowed from Decrypted x10 roms - latest r2ba024 rom - with sin reconstructor)
mtechfan said:
Remove battery, wait 15 minutes. Put battery in but don't turn on, just enter straight into bootloader mode when you need to.
Clear out content in SEUS folder and start over again.
Good luck!
Click to expand...
Click to collapse
Hi, Dear friend, Thanks a million for your suggestion. I will take a trial and report the results tonight since it is already 4 am, I am live in Japan.
I already have the same problem and resolve it with SEUS.
Try to change USB port if you have an issue.
Grospolina said:
So is your phone originally the SO-01B (docomo)? If so, then you should either be using SO-01B files or X10i (NOT X10a).
Can you try reflashing to SO-01B firmware to make sure that there isn't anything wrong with your phone? Just run step1 from the following (this is the original root package, which used docomo firmware). Don't run any other steps.
ROOT_F2v1.rar (borrowed from [GUIDE] Root your X10 R2BA023 !)
For the SEUS method, why did you replace the java files? That's only for decrypting ROMs, not for flashing your phone. Also, you should be using X10i files.
For the Omnius method, did you put the files in the correct order? Application should be X10i_GENERIC_1234_8465R8A_R1FB001.zip (large file, ~100MB) and Customization should be phone.zip (small file, ~15MB). Since you have the SO-01B, you could also try these files:
SO-R1EA025-DEK.rar (borrowed from Decrypted x10 roms - latest r2ba024 rom - with sin reconstructor)
Click to expand...
Click to collapse
Hi, Dear friend, Thanks a million for your suggestions. My handset is originally the SO-01B (docomo). I have runned step1 from original root package with docomo firmware you suggested at the very beginning. However, I failed. I am supprised it only took 3 minutes to complete the flashing for the first step which normally take 5 minutes regarding the others comments. Although the cmd windows shows it completes with ~test in the end without any error, I am afraid it actually missd flashing some files. As for the second suggestion on SEUS method, I will take a trial and report here later. As for the third suggestion on Omnious, I thout I have made a mistake with the oder placing the two files. I have just re-flashed my X10 by Omnious tools according to your suggestion, which the application is with X10i_GENERIC_1234_8465R8A_R1FB001.zip (large file, ~100MB) and Customization is with phone.zip (small file, ~15MB), however I still got a failed results during the application file flashing.(the customization file flashing has not even started ). You may take a look at following log infomation.
Code:
Action journal
02:46:27 Flash
02:46:27 Allows to change languages supported by the phone and upgrade its firmware.
02:46:27 Operating system: Microsoft Windows XP Professional Service Pack 3 (build 2600)
02:46:27 Application version: 0.07.2279 (beta)
02:46:27 . The action name is 'Flash'
02:46:27 Selected phone type: Xperia™ X10
02:46:27 i Instructions
02:46:27 i 1. Make sure the phone battery is charged to at least 50%.
02:46:27 i 2. Switch off the phone!
02:46:27 i 3. Remove the phone battery and wait at least 5 seconds before reinserting it!
02:46:27 i 4. Press and hold the return back button, then connect the cable to the phone!
02:46:27 . The action started waiting for the user
02:47:10 . The action finished waiting for the user
02:47:10 Connecting via SEMC USB Flash Device (USB4)...
02:47:10 Device driver version: 2.2.0.5
02:47:10 Detected chipset: QSD8250
02:47:10 Boot mode: EROM
02:47:10 IMEI: [email protected]@@
02:47:10 Sending loader...
02:47:15 Establishing connection to the server...
02:47:19 Receiving news...
02:47:22 i No news
02:47:22 Actual credit: 0.00
02:47:30 Writing file X10i_GENERIC_1234_8465R8A_R1FB001.zip...
02:50:33 e Failed!
02:50:33 . The action entered shutdown phase
02:50:33 . The action reported failure
Error code
# E39CDD9F86C3082E
Error details
---
4B B3 B7 81 D4 A0 1C 73 C2 C5 F8 25 C2 05 14 45
22 C8 3E 2E F6 CF F4 37 F9 CC B3 85 FC 8A 04 EB
6A 93 97 D6 31 F3 FC 13 5E A7 6D 6B B0 C8 5F 7E
8C 06 02 D8 7E 88 D1 41 5F E4 82 A6 DC 1B 27 CE
18 DF 1F FC F6 E0 77 1E 43 57 F5 22 4F 46 86 82
19 E0 9C 4E E5 DC EE C6 4B 17 FA 16 C1 8D 85 81
9F 90 1D 7D 92 00 EF 1B 3D 43 DD AB 00 6C F1 29
C8 5C B4 F6 D8 AE E1 14 6D D8 5A EF DB E9 3D A7
D6 57 61 8B 9B 3F EA 68 CC DC 1E CE 21 D6 E0 72
E9 F3 30 29 17 26 E0 26 2A A7 53 09 80 06 84 95
16 99 51 A9 25 02 D2 AC DE 55 58 B7 9E 15 74 77
5A E2 15 9C F8 4E 94 E3 6E D1 65 9A 2C 09 32 EA
CA 0D 40 CB 42 6E AE 64 50 14 C8 E7 7E 83 F8 E2
44 FD FE 4E 36 F1 B4 73 8E C5 D8 C9 12 59 BC AB
F8 FE 60 DF A6 31 C4 2C 1E 6B E8 79 56 30 9A A9
E6 7D 70 DF EA 91 D4 D9 9A CE 65 04
---
Flashing with DoCOMO SO-R1EA025-DEK, Failed too.
Code:
Action journal
03:11:20 Flash
03:11:20 Allows to change languages supported by the phone and upgrade its firmware.
03:11:20 Operating system: Microsoft Windows XP Professional Service Pack 3 (build 2600)
03:11:20 Application version: 0.07.2279 (beta)
03:11:20 . The action name is 'Flash'
03:11:20 Selected phone type: Xperia™ X10
03:11:20 i Instructions
03:11:20 i 1. Make sure the phone battery is charged to at least 50%.
03:11:20 i 2. Switch off the phone!
03:11:20 i 3. Remove the phone battery and wait at least 5 seconds before reinserting it!
03:11:20 i 4. Press and hold the return back button, then connect the cable to the phone!
03:11:20 . The action started waiting for the user
03:11:35 . The action finished waiting for the user
03:11:35 Connecting via SEMC USB Flash Device (USB4)...
03:11:35 Device driver version: 2.2.0.5
03:11:35 Detected chipset: QSD8250
03:11:35 Boot mode: EROM
03:11:35 IMEI: [email protected]@@
03:11:35 Sending loader...
03:11:40 Establishing connection to the server...
03:11:43 Receiving news...
03:11:45 i No news
03:11:46 Actual credit: 0.00
03:11:54 Writing file FILE_277398338_1275040924000_1274947104000_277398125_112659344_INFILE_LONGTERM.zip...
03:14:56 e Failed!
03:14:56 . The action entered shutdown phase
03:14:56 . The action reported failure
Error code
# E39CDD9F86C3082E
Error details
---
6F CF 37 25 E8 9C D0 F1 4A 7F 34 00 0E B5 A8 80
E4 4C 92 CA 2A 2D E0 AB ED 76 EF 5F 30 F8 98 07
22 29 7B B2 CD F1 10 AF 96 63 E9 0F 7C 44 DB 12
18 C2 F6 82 A2 6A 3D 23 4B 5E D6 42 10 69 B3 1C
EC 1B CB 58 36 22 A3 E2 4B 6D 39 F8 03 CA 3A AE
71 5A C8 D4 45 3E C2 A4 5F 2D 2E CC 8D 01 E9 ED
2B 54 B1 99 EE 7C 63 59 F5 07 D1 B1 4C E0 0D 3B
A0 E6 D8 AC 84 B2 0D 88 85 E2 7E 75 97 65 A9 75
5E 13 35 D1 5B 03 26 EA 44 66 2A EA ED 5A AC A0
7D C9 9C 33 CB 3A 0C 44 3E E3 07 2D B0 74 E8 79
5E DD 45 33 D9 FE 3E 10 16 91 2C D3 AE 66 08 27
32 3F AB 7B 24 52 80 81 86 6B C1 7E 1C 85 A6 C6
C2 37 14 6F 7E 52 62 98 58 2E F4 C3 32 0F 4C CE
2C 47 52 2A 6A 13 A0 EF 66 FF 04 ED 5E D5 28 C7
4C C4 F4 3B 26 B3 B0 90 D6 2F EC 63 E6 42 66 45
72 C7 E4 7B B6 73 C0 BB 8E F4 B1 60
---
I will report more results later since it is already 4 am in Japan. I have to go to bed.
Thank you again for your big help.
Battosai94 said:
I already have the same problem and resolve it with SEUS.
Try to change USB port if you have an issue.
Click to expand...
Click to collapse
Hi friend, thank you four suggestion. i will take a trial and report here later.
when flashing with x10flash deal, step one of root, you have to wait till it says press any key to continue, or you have only flashed a portion of the full rom, it will read like it's done several times throughout the process
mtechfan said:
Remove battery, wait 15 minutes. Put battery in but don't turn on, just enter straight into bootloader mode when you need to.
Clear out content in SEUS folder and start over again.
Good luck!
Click to expand...
Click to collapse
Unfortunately, I do the process according to your suggestion, but the result is the same as before.
dan-htc-touch said:
when flashing with x10flash deal, step one of root, you have to wait till it says press any key to continue, or you have only flashed a portion of the full rom, it will read like it's done several times throughout the process
Click to expand...
Click to collapse
Yes, I did exactly what the "howto" file told us to do, but failed. The flashing time is only 3 minutes.
Battosai94 said:
I already have the same problem and resolve it with SEUS.
Try to change USB port if you have an issue.
Click to expand...
Click to collapse
I have even tried with every usb ports on my PC and even tried with a different PC.
lazy i hope that you have more luck than me, my X10 was dead and send to SE to repair, you can see my history
http://forum.xda-developers.com/showthread.php?t=714538
alucine said:
lazy i hope that you have more luck than me, my X10 was dead and send to SE to repair, you can see my history
http://forum.xda-developers.com/showthread.php?t=714538
Click to expand...
Click to collapse
Hi alucine, thank you for your reply.
OMG! I have exactly the same situation as your experienced.
If it is a nand failure issue, is that mean I should give up and send my phone to SE center rather than do any trial.
However, I am wondering most of the guy who came across the Yellow exclamation mark after updating by SEUS finally saves back their phones by using one of the methods. How can Bin4ry expected our issue is related to the NAND failure issue. How can we confirm whether we have the NAND failure issue or not after we got the Yellow exclamation mark. Is it exactly related to the battery condition when flashing the x10 with any method?
Can we draw the concultion that, the X10 user will got NAND failure(HW related) if the flashing was under poor battery condition.
Hi,
please be so kind and upload the log of the X10flash program. Because i personally dont know the Omnius Program
Like you said the falsher finishes the progress, if its 3 minutes or 5 minutes , i dont know I never measured the time of the process
If you upload the flashlog maybe we can help you.
The problem is following:
Maybe you have a bad nand, then X10flash, Omnius, SEUS or whatever try to flash your phone, all data is send correctly but the phone doenst write it to nand correct.
So what happens now after flash ? The bootloader checks and validates the firmware which is on your phone, if the calculated checksum is not correct the bootloader sends you to semc recovery (you see the triangle and the exclamation mark ! )
If nothing helps and X10flash runs correctly etc. then the last option is that your nand is ****ed up (this happens sometimes , you can compare it to faulty ram on PC or smth.). This is not too bad for you because SE has to exchange your device into a new one.
But first of all, please upload your X10 flashlog, and lets see what happens there
Regards
Bin4ry
Hi Bin4ry, thanks a million for your reply. I just re-flashed the x10 according to the first step in your tutorial. (http://forum.xda-developers.com/showthread.php?t=711907)
I attached the log code in my cmd windows. Pls take a look. seems there are three error info. in the end of the log files. I belive you understand well what is that mean. BTW, I still got triangle mark after this flashing. Thank you in advance for your great help. I also appreciate your great work for us in XDA forum.
Code:
2010-7-20 19:10:15 X10flash main
信息: start
2010-7-20 19:10:15 X10flash readReply
信息: <<< cmd=1,flags=1,length=46
2010-7-20 19:10:15 X10flash testPluged
信息: <<<VER="R8A013";DATE="20100119";TIME="17:24:00";
2010-7-20 19:10:15 X10flash writeCmd
信息: write(cmd=1) (finish)
2010-7-20 19:10:15 X10flash readReply
信息: <<< cmd=1,flags=1,length=586
2010-7-20 19:10:15 X10flash testCmd01
信息: <<<PROT_VER="01";DATE="20100119";TIME="17:24:00";VER="R8A013";UNIQUE_DEV_ID="7E2914576285FCBDDB99FD73DE3CC610FDEF4539";CXC="1226-2253";TYPE="S1_EROM";SEC_LOCK_STATUS="LOCKED";HASH_PUB_KEY="00000000000000000000000000000000";EROM_AID="0001";LOADER_AID="0001";SW_AID="0001";CUST_AID="0001";SIM_LOCK_AID="0001";IMEI="35949603234196";MSN="CB511JJNU6";SIN_VER="0001";SIMLOCK_TAMP="";AID_TAMP="NOT_TAMPERED";LOADER_ROOT="S1_Loader_Root_f851";EROM_ROOT="S1_EROM_Root_b15e";SW_ROOT="S1_SW_Root_ac12";CUST_ROOT="S1_Cust_Root_5789";SIM_LOCK_ROOT="S1_SL_Root_f20d";HW_CONF_ROOT="S1_HWConf_Root_ee5d";
2010-7-20 19:10:15 X10flash writeCmd
信息: write(cmd=9) (finish)
2010-7-20 19:10:15 X10flash readReply
信息: <<< cmd=9,flags=1,length=0
2010-7-20 19:10:15 X10flash writeCmd
信息: write(cmd=10) (finish)
2010-7-20 19:10:15 X10flash readReply
信息: <<< cmd=10,flags=1,length=0
2010-7-20 19:10:15 X10flash writeCmd
信息: write(cmd=5) (finish)
2010-7-20 19:10:15 X10flash readReply
信息: <<< cmd=5,flags=1,length=0
2010-7-20 19:10:15 X10flash writeCmd2
....................................................
....................................................
....................................................
The content is the similar, so I delete large amount of log info. here,
....................................................
....................................................
....................................................
2010-7-20 19:12:29 X10flash readReply
信息: <<< cmd=6,flags=1,length=0
2010-7-20 19:12:29 X10flash writeCmd
信息: write(cmd=6) (finish)
2010-7-20 19:13:18 X10flash readReply
信息: <<< cmd=6,flags=0,length=0
2010-7-20 19:13:18 X10flash writeCmd
信息: write(cmd=5) (finish)
2010-7-20 19:13:18 X10flash readReply
信息: <<< cmd=5,flags=0,length=0
2010-7-20 19:13:18 X10flash writeCmd
信息: write(cmd=7) (finish)
2010-7-20 19:13:18 X10flash readReply
信息: <<< cmd=7,flags=1,length=93
2010-7-20 19:13:18 X10flash testCmd07
信息: <<<ERR_SEVERITY="MAJOR";ERR_CLASS="PROTOCOL_CLASS";ERR_STATIC="UNVALID_COMMAND";ERR_DYNAMIC="";
2010-7-20 19:13:18 X10flash writeCmd
信息: write(cmd=6) (finish)
2010-7-20 19:13:18 X10flash readReply
信息: <<< cmd=6,flags=0,length=0
2010-7-20 19:13:18 X10flash writeCmd
信息: write(cmd=7) (finish)
2010-7-20 19:13:18 X10flash readReply
信息: <<< cmd=7,flags=1,length=93
2010-7-20 19:13:18 X10flash testCmd07
信息: <<<ERR_SEVERITY="MAJOR";ERR_CLASS="PROTOCOL_CLASS";ERR_STATIC="UNVALID_COMMAND";ERR_DYNAMIC="";
2010-7-20 19:13:18 X10flash writeCmd
信息: write(cmd=13) (finish)
2010-7-20 19:13:18 X10flash readReply
信息: <<< cmd=13,flags=0,length=0
2010-7-20 19:13:18 X10flash writeCmd
信息: write(cmd=7) (finish)
2010-7-20 19:13:18 X10flash readReply
信息: <<< cmd=7,flags=1,length=93
2010-7-20 19:13:18 X10flash testCmd07
信息: <<<ERR_SEVERITY="MAJOR";ERR_CLASS="PROTOCOL_CLASS";ERR_STATIC="UNVALID_COMMAND";ERR_DYNAMIC="";
2010-7-20 19:13:18 X10flash writeCmd
信息: write(cmd=10) (finish)
2010-7-20 19:13:18 X10flash readReply
信息: <<< cmd=10,flags=0,length=0
2010-7-20 19:13:18 X10flash writeCmd
信息: write(cmd=4) (finish)
2010-7-20 19:13:18 X10flash readReply
信息: <<< cmd=4,flags=1,length=0
2010-7-20 19:13:18 X10flash run
信息: ###test end.
Hi, i've got the same case on my phone!
So what we should do?

X10 Mini 2.1 incl. Flashtool (Updated Flasher 14.11.2010)

Hi,
With the flashtool you should be able to flash the phone to newst 2.1 Firmware.
Download flashtool: (Update: 14.11.2010) GUI VERSION!!
http://www-stud.uni-due.de/~sfanmakr/X10Flash/X10Flash-2.1.zip
HOWTO for Flasher here:
http://forum.xda-developers.com/showpost.php?p=8976947&postcount=1
Download X10 mini 2.1 firmware:
E10i:
http://www.multiupload.com/GM4VW1LNVV Nordic
http://forum.xda-developers.com/showpost.php?p=9067949&postcount=1 UK (download from cocker80's Thread)
www.multiupload.com/0YT1RGO52C French (thanks to shokmah)
http://www.multiupload.com/EGLS7WNRRF German
NOTE THIS IS ONLY FOR MINI NOT FOR MINI PRO!!
Note: You have to disable Vista/7 UAC! If not you are running in problems !
You HAVE TO WIPE USERDATA! If Not you will be stuck in booting Loop!
Regards
Bin4ry
I can confirm this works on X10 mini!! e10i
installed without a hitch (took about 1-2min)
Just testing all the features now.. but so far seems to be in ordnung
Bin4ry you are a machine! beers heading your way my friend..
Very nice Thanks for feedback. so everyone can use this now
Regards
Bin4ry
Can u tell me if it has portuguese language?
is it branded or unbranded ?
all data will be lost?
thanks
On all Android devices there are all languages on every firmware included.
This is unbranded Nordic rom.
And yes to upgrade to 2.1 a wipe of all data is neccessary.
Regards
Bin4ry
Yup, like a 'normal' upgrade, you loose whatever you have that is in not on the sdcard or backed up...
I am downloading but the download is SO SO slow :-( it says it will last 3 hours to download :-( can u put in a dropox for example?
so it means this unbranded nordic is the same as buying a new phone only with SE applications, right? than i install MMS and acess points from my operator and its ok...thats it?
thanks
thanks a lot
Thanks a lot man !
It's work very good and it's very easy !
Cannot put on dropbox, but i have uploaded to multiupload. You have a few options where to download.
I can download this file in 30 seconds from rapidshare for example.
So there is no branding, this is like you have bought the phone directly in sweden.
SE added 1 Swedish newsapp to the phone, nothing more. (Localization).
If anyone wants to make more mirrors its okay for me!
Regards
Bin4ry
Hi Bin4ry
If i try to flash i get this:
Please choose:
1.) 32-Bit Windows XP
2.) 64-Bit Windows XP
3.) 32-Bit Windows Vista/7
4.) 64-Bit Windows Vista/7
Please choose: (1-4): 4
please connect Xperia in flash mode.
Press any key to continue . . .
'java' is not recognized as an internal or external command,
operable program or batch file.
Press any key to continue . . .
Here are the log file output:
31.10.2010 17:39:52 X10flash main
INFO: start
31.10.2010 17:39:52 X10flash readReply
INFO: <<< cmd=1,flags=1,length=46
31.10.2010 17:39:52 X10flash testPluged
INFO: <<<VER="R8A013";DATE="20100119";TIME="17:24:00";
31.10.2010 17:39:52 X10flash writeCmd
INFO: write(cmd=1) (finish)
31.10.2010 17:39:52 X10flash readReply
INFO: <<< cmd=1,flags=1,length=586
31.10.2010 17:39:52 X10flash testCmd01
INFO: <<<PROT_VER="01";DATE="20100119";TIME="17:24:00";VER="R8A013";UNIQUE_DEV_ID="CC9C75B8AB7D0AA1136F5DDF3E09FF021FDC9853";CXC="1226-2253";TYPE="S1_EROM";SEC_LOCK_STATUS="LOCKED";HASH_PUB_KEY="00000000000000000000000000000000";EROM_AID="0001";LOADER_AID="0001";SW_AID="0001";CUST_AID="0001";SIM_LOCK_AID="0001";IMEI="35941903054717";MSN="CB511GLY6V";SIN_VER="0001";SIMLOCK_TAMP="";AID_TAMP="NOT_TAMPERED";LOADER_ROOT="S1_Loader_Root_f851";EROM_ROOT="S1_EROM_Root_b15e";SW_ROOT="S1_SW_Root_ac12";CUST_ROOT="S1_Cust_Root_5789";SIM_LOCK_ROOT="S1_SL_Root_f20d";HW_CONF_ROOT="S1_HWConf_Root_ee5d";
31.10.2010 17:39:52 X10flash writeCmd
INFO: write(cmd=9) (finish)
31.10.2010 17:39:52 X10flash readReply
INFO: <<< cmd=9,flags=1,length=0
31.10.2010 17:39:52 X10flash writeCmd
INFO: write(cmd=10) (finish)
31.10.2010 17:39:52 X10flash readReply
INFO: <<< cmd=10,flags=1,length=0
31.10.2010 17:39:52 X10flash writeCmd
INFO: write(cmd=6) (finish)
31.10.2010 17:39:52 X10flash readReply
INFO: <<< cmd=6,flags=0,length=0
please help me
you have to overwrite the loader.sin with the one of the firmware package!
Regards
Bin4ry
Hi
Ayone knows if there's a 1.6 flash tool, I think I might want to revert to 1.6 due to some issues Im havin, in particular som video performance issues....
Rgds,
Vic
Bin4ry said:
you have to overwrite the loader.sin with the one of the firmware package!
Regards
Bin4ry
Click to expand...
Click to collapse
Hi
I did that again, as soon as the green light comes up(confirming flash mode) i get the java msg and PC Companion start, the green light turns orange and the phone starts to charge
Work great for me !!
Big thanks..
I'm French, with a french "free" smartphone (x10 Mini)
Now i'm on 2.1 with your way..
Thanks again..
can anyone upload to a dropbox ? i cannot download from any of the servers :-(
kimb0 said:
Hi
I did that again, as soon as the green light comes up(confirming flash mode) i get the java msg and PC Companion start, the green light turns orange and the phone starts to charge
Click to expand...
Click to collapse
i had this issue too.
keep "back" held on the phone while you click flash
it should work then
kimb0 said:
Hi
I did that again, as soon as the green light comes up(confirming flash mode) i get the java msg and PC Companion start, the green light turns orange and the phone starts to charge
Click to expand...
Click to collapse
Try to prevent PC-Comp from starting and get a little timing with flashing =)
vic256 said:
Hi
Ayone knows if there's a 1.6 flash tool, I think I might want to revert to 1.6 due to some issues Im havin, in particular som video performance issues....
Rgds,
Vic
Click to expand...
Click to collapse
You can use the same tool for 1.6 and 2.1 on the X10 minis. It's different to the big X10!
Regards
Bin4ry
Mini-Pro?
So this will not work on the Mini-Pro??
Can you make one for X10 Mini-Pro please?
Hai.teach how to update my current 1.6 to 2.1 software..i need a detail
Sent from my E10i using XDA App
HELP, I keep getting the java exception, I did all the above
HELP, I keep getting the java exception, I did all the above,
what can it be????????????
UPDATE::I forgot to root it again!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
SOOOOOOOOOOOOOOOOORRRRRRRRRRRRRRRRRRRRYYYYYYYYYYYYYYYYYYY

Help with flashing to 2.1

Hi,
I am having a slight issue, not sure what is causing it.
Every time I try and flash to 2.1 from my 1.6 device I get this error:
Code:
Please choose:
1.) 32-Bit Windows XP
2.) 64-Bit Windows XP
3.) 32-Bit Windows Vista/7
4.) 64-Bit Windows Vista/7
Please choose: (1-4): 4
please connect Xperia in flash mode.
Press any key to continue . . .
Jan 9, 2011 4:24:17 PM X10flash main
INFO: start
Jan 9, 2011 4:24:18 PM X10flash readReply
INFO: <<< cmd=1,flags=1,length=46
Jan 9, 2011 4:24:22 PM X10flash readReply
INFO: ### read filed : checksum err! FFFFFFFF!=00000000
Jan 9, 2011 4:24:22 PM X10flash testPluged
INFO: <<<
Jan 9, 2011 4:24:22 PM X10flash writeCmd
INFO: write(cmd=1) (finish)
Exception in thread "main" java.lang.NullPointerException
at java.lang.String.<init>(Unknown Source)
at X10flash.testCmd01(X10flash.java:142)
at X10flash.run(X10flash.java:380)
at X10flash.main(X10flash.java:421)
Press any key to continue . . .
Does anyone know a fix for this?
Also - I've noticed that the solid green light seems to disappear and the phone will just boot up normally after 10 seconds
Thanks,
Vijay Pather
What happened to your other thread? And please don't start new threads about the same thing, and issues like this have been answered a thousand times, it's actually on the first page of the first link I gave you what to try if you have this issue, so browse the threads I suggested yesterday on your other thread.
Vijay Pather said:
Hi,
I am having a slight issue, not sure what is causing it.
Every time I try and flash to 2.1 from my 1.6 device I get this error:
Code:
Please choose:
1.) 32-Bit Windows XP
2.) 64-Bit Windows XP
3.) 32-Bit Windows Vista/7
4.) 64-Bit Windows Vista/7
Please choose: (1-4): 4
please connect Xperia in flash mode.
Press any key to continue . . .
Jan 9, 2011 4:24:17 PM X10flash main
INFO: start
Jan 9, 2011 4:24:18 PM X10flash readReply
INFO: <<< cmd=1,flags=1,length=46
Jan 9, 2011 4:24:22 PM X10flash readReply
INFO: ### read filed : checksum err! FFFFFFFF!=00000000
Jan 9, 2011 4:24:22 PM X10flash testPluged
INFO: <<<
Jan 9, 2011 4:24:22 PM X10flash writeCmd
INFO: write(cmd=1) (finish)
Exception in thread "main" java.lang.NullPointerException
at java.lang.String.<init>(Unknown Source)
at X10flash.testCmd01(X10flash.java:142)
at X10flash.run(X10flash.java:380)
at X10flash.main(X10flash.java:421)
Press any key to continue . . .
Does anyone know a fix for this?
Also - I've noticed that the solid green light seems to disappear and the phone will just boot up normally after 10 seconds
Thanks,
Vijay Pather
Click to expand...
Click to collapse
Try switching the usb ports. It usually helps. Btw there is a new method ti root the device that too by a single click method. I'll post the link when I access my comp
Sent from my X10i
XperiaX10iUser said:
What happened to your other thread? And please don't start new threads about the same thing, and issues like this have been answered a thousand times, it's actually on the first page of the first link I gave you what to try if you have this issue, so browse the threads I suggested yesterday on your other thread.
Click to expand...
Click to collapse
Just to rectify this is a separate issue the first thread was help rooting the phone and this is help I need flashing to 2.1 - I followed the advice with the post putting the Device ID into the text file - the issue I am having (I think) is that the Solid Green light seems to disappear after some time.
If anyone can help it would be greatly appreciated.
I was also wondering if there was a way I could flash the phone to 2.1 through the phone using my memory card. As in a way I could root my v1.6 then use some tool to upgrade it seeing as my device keeps dropping out when in flash mode.
Thanks.

[Q] Looking for venue version numbers

I'm looking to make a list of known DT versions for the venue, unlike the streak the venue actually displays the version number
101: Unknown
302: Unknown
303: Unknown
304: Unknown
307: y3.027 Dec 21 2010, 11:37:11
319: Unknown
321: y3.033 Mar 21, 2011 18:27:39
323: y3.038 Sep 22, 2011 01:27:06
324: Unknown
325: y3.036 May 21, 2011 00:41:22
406: Unknown
407: Unknown
408: Unknown
How to find version:
Finding your baseband version:
Turn Device on
Go to Settings -> about phone -> baseband version
GTOUB1A1xxxyy-zz
Finding your DT version:
Turn Device off
Move ringer to up position
Enter recovery mode (vol up/down + power)
Version is the two strings at the bottom
My Dell unlocked Ver,
Dell Venue:
Oem Ver: GTOUB1A130730
Baseband Ver: GTOUB1A130730-AWS
Maybe I can help you test new software sice I have backup images of Venue.
Maybe we can have Ice Cream running on the Venue.
Question:
How are you developing for the venue ?
On linux or Win ?
What software are you using to build new images can you point me in the right directions.
Thanks
Rob
I mainly need the DT versions, the baseband version is to match which is what as dt versions do not consistantly go up.
Except for compiling code, everything I do is on win7
Dell Venue:
Oem Ver: GTOUB1A132300
y3.038 Sep 22, 2011 01:27:06
Mine
408: y3.038, Sept 22, 2011, 01:27:06
OEM - GTOUB1A140814
BB - GTOUB1A140614-US
This Venue began life as 307/13505 buld though. Not sure if flashing 408 caused the DT version to change or if the DT I have is actually a carryover from 307.
BB - GTOUB1A130730-US
Build - 13505
DT: y3.027
Date: Dec 21 2010, 11:37:11
After installing BB 325:
BB- GTOUB1A32500-US
Build - 17232
DT y3.036
Date: May 21 2011, 00:41:22
michaeljwestii said:
408: y3.038, Sept 22, 2011, 01:27:06
OEM - GTOUB1A140814
BB - GTOUB1A140614-US
This Venue began life as 307/13505 buld though. Not sure if flashing 408 caused the DT version to change or if the DT I have is actually a carryover from 307.
Click to expand...
Click to collapse
Are you sure the bb was 406, and have you ever installed 406? I've been told that the bb in 408 is also 408
TheManii said:
Are you sure the bb was 406, and have you ever installed 406? I've been told that the bb in 408 is also 408
Click to expand...
Click to collapse
I did install 406, then 408, then the deoxed 408. Looks like Royoni had the same issue: http://forum.xda-developers.com/showpost.php?p=20563440&postcount=8
Baseband version:
GTOUB1A130730-AWS
DT: y3.027
Date: Dec 21 2010, 11:37:11
Refurbished Venue from Dell with stock 2.2

firmware for MCTB-JY

Dear forum members,
I am looking for a firmware file for my android car radio
I want to install android auto
who can help me with that?
__________________________________________________________________________________
MCU version
MCTB-JY-V2.08
Nov 04 2014 08:53:14
Model number S07
S/N 000D18A14437
Android version 4.2.2_06112014
Kernel version 3.0.36+
[email protected]#1118 Thu Nov 6 08:44:45 CST 2014
Build number rk30sdk-eng4.2.2.2 06112014 15:07:40

Categories

Resources