Hi..
On my X10 is displayed, I can get an update. Unfortunately, this does not work on the SEUS
PC Companion works for me (nordic firmware)
Run it again, it said it was ready on the phone but not PC Companion or SEUS, so I ran PPC which gave me the same FW, so I've just run SEUS again and it said it was available. Just downloading now. 148.6mb
reinstall seus, it seem use temp file :-D
it goes. have re-installed the SEUS have to wait a bit I suppose
I just update the phone vias seus, new firmware available, 2.1, cheer guys... been looking too long for this update...
XperiaX10iUser said:
Run it again, it said it was ready on the phone but not PC Companion or SEUS, so I ran PPC which gave me the same FW, so I've just run SEUS again and it said it was available. Just downloading now. 148.6mb
Click to expand...
Click to collapse
Updating thrue seus and my file was 163.2mb
does anybody can confirm, that he is running 2.1 after the update ?
my finished with 1.6, trying second time now .
Installing Portugal (Nordic b)
mine is installing as we speak thru SEUS.
o meu está a instalar neste momento através do SEUS.
acho que não vou dormir !!
got same here, just 1.6 and if i let my phone check for new firmware i get the message up to date.
strix75 said:
Updating thrue seus and my file was 163.2mb
Click to expand...
Click to collapse
Yeah, had to try twice then got it.
i got something strange here
i upgrade now to 2.1 after use "Debrand to Nordic Combined (B) Quick and update to 2.1" method and now my phone isn`t reconized ????
i`ve try to install PCCompanio again and nothing....
enyone can help me?
thks
luisalhosilva said:
mine is installing as we speak thru SEUS.
o meu está a instalar neste momento através do SEUS.
acho que não vou dormir !!
Click to expand...
Click to collapse
Is your firmware Portuguese or is it nordik?
Sent from my X10i using XDA App
guys do u think in middle east they have already 2.1 thanxs
I have branded and unrooted X10i which I purchased from Singtel, Singapore. I was unable to update via SEUS in Singapore until 14 Nov before I left for Bali on the 15 Nov. I tried to update my phone via SEUS in Bali and YES, there was a software update about 164Mb and I ran the whole update process successfully. the phone now shows the following;
Build number: 2.0.A.0.504
Baseband version: 2.0.46
Firmware version: 2.1-update1
Kernel version: 2.6.29 [email protected] #1
IMEI SV: 46
My IMEI starts with 359************
Everything works well and perfect except for the unlocking screen (when the power button is pressed to get out of battery save), the words 'This phone belongs to' overlaps with the name of the carrier operator. Its looks like the alignment or the position for the words are out. I searched through the settings for any related setting for the unlocking screen and nothing was there to correct it...
Anyone has encountered this problem like mine? Please advise.
Related
because none of these others work..
one guy made a tutorial to flash uk generic, and claims it's nordic..
http://forum.xda-developers.com/showthread.php?t=824766
works 4 me
and for mini (not pro) same method but for me the good number was 1238-0549
so edit the build.prop with this number, restart your phone, connect it with PC Compagnion and surprise, it says the update is available
just downloading the upgrade from france after sooooooooooo long waiting!!
oh and follow the "indian"(lol?) method in this forum if you don't have the generic uk firmware before editing build.prop
A question and change the numbers
ro.semc.version.cust = XXXX-XXXX
ro.product.name = e10i_XXXX-XXXX
pc companion entered and told me that this date, have to modify something else in the build?
yes there are 3 lines where the numbers appear, modify all 3.
if you have x10 mini = 1238-0549 (which seems to be your case : E10i )
if you have mini pro = 1238-8536
After modifying the build.prop, shutdown your phone and restart it.
Connect to pc companion and the update notification should apper.
Also verify you have an up-to-date generic firmware as i don't know if branded phones can get the update right now.
Good luck!
i got MINI RPO from Claro CHILE, i change the numbers to what you say but pc companion or SEUS say "your phone is up to date", i need change Claro CHILE Firmware to UK generic???? if i have to, how i do it???
Regards!!!
Thanks, could not think it's because my phone is branded
xxxcazador said:
Thanks, could not think it's because my phone is branded
Click to expand...
Click to collapse
te resulto??? como lo hiciste??? (Work??? how you do it?)
jahsoldier said:
yes there are 3 lines where the numbers appear, modify all 3.
if you have x10 mini = 1238-0549 (which seems to be your case : E10i )
if you have mini pro = 1238-8536
After modifying the build.prop, shutdown your phone and restart it.
Connect to pc companion and the update notification should apper.
Also verify you have an up-to-date generic firmware as i don't know if branded phones can get the update right now.
Good luck!
Click to expand...
Click to collapse
thanks very much now i update my phone
jahsoldier said:
yes there are 3 lines where the numbers appear, modify all 3.
if you have x10 mini = 1238-0549 (which seems to be your case : E10i )
if you have mini pro = 1238-8536
After modifying the build.prop, shutdown your phone and restart it.
Connect to pc companion and the update notification should apper.
Also verify you have an up-to-date generic firmware as i don't know if branded phones can get the update right now.
Good luck!
Click to expand...
Click to collapse
3 lines?
I just have two, can you please tell me the lines to edit?
edit: soz it is 3 lines changed but still nothing
kimb0 said:
3 lines?
I just have two, can you please tell me the lines to edit?
edit: soz it is 3 lines changed but still nothing
Click to expand...
Click to collapse
these line
PHP:
ro.semc.version.cust
wolframio74 said:
te resulto??? como lo hiciste??? (Work??? how you do it?)
Click to expand...
Click to collapse
No, no pude, al parecer es por que Esta con compañia claro y no liberado...
------------------------
No, I could not, it seems that this is clear and not to company released ...
xxxcazador said:
No, no pude, al parecer es por que Esta con compañia claro y no liberado...
------------------------
No, I could not, it seems that this is clear and not to comp any released ...
Click to expand...
Click to collapse
creo que da lo mismo el operador por que lo que esta bloqueado es la SIM, yo creo que hay que pasarlo a la version UK, y luego hacerle update.
-------------------------
Shoul i change my firmware to the UK version and then update to get 2.1? regards!!!!
jahsoldier said:
and for mini (not pro) same method but for me the good number was 1238-0549
so edit the build.prop with this number, restart your phone, connect it with PC Compagnion and surprise, it says the update is available
just downloading the upgrade from france after sooooooooooo long waiting!!
oh and follow the "indian"(lol?) method in this forum if you don't have the generic uk firmware before editing build.prop
Click to expand...
Click to collapse
Whats there to 'lol' so much ??? Huh?
Just incase you dont like 2.1 here is the decrypted E10i_1.6 1.2.A.1.174 406 world 1-8 for flashtool.
Download X10 mini 1.6 firmware:
http://filejumbo.com/Download/4EDC8FD29D348D07
http://www.multiupload.com/1IY5LUSRKY
NOTE THIS IS ONLY FOR MINI NOT FOR MINI PRO!!!
Cheers Bin4ry for your support.
Any chance of getting a Mini Pro version?
cocker80 said:
Just incase you dont like 2.1 here is the decrypted E10i_1.6 1.2.A.1.174 406 world 1-8 for flashtool.
Download X10 mini 1.6 firmware:
http://filejumbo.com/Download/4EDC8FD29D348D07
NOTE THIS IS ONLY FOR MINI NOT FOR MINI PRO!!!
Cheers Bin4ry for your support.
Click to expand...
Click to collapse
Thanks mate, I've been looking for this as I'm not really happy with the 2.1 update's performance ... Much appreciated!
EDIT: Flashed my phone back to 1.6 just now, works fine... Thanks again mate!
anyone got the e10a version of this?
vic256 said:
EDIT: Flashed my phone back to 1.6 just now, works fine... Thanks again mate!
Click to expand...
Click to collapse
no problem
cocker80 said:
Just incase you dont like 2.1 here is the decrypted E10i_1.6 1.2.A.1.174 406 world 1-8 for flashtool.
Download X10 mini 1.6 firmware:
http://filejumbo.com/Download/4EDC8FD29D348D07
NOTE THIS IS ONLY FOR MINI NOT FOR MINI PRO!!!
Cheers Bin4ry for your support.
Click to expand...
Click to collapse
Thank you so much.
bazalicious said:
Any chance of getting a Mini Pro version?
Click to expand...
Click to collapse
X10 Mini Pro version >> http://forum.xda-developers.com/showthread.php?t=827273
I need the version 1.6 for my x10a mini please!!!! =( i have problems whith the bands! =(
I've decrypted mine italian unbranded firmware. Someone is needing that?
Il Tulipano Nero said:
I've decrypted mine italian unbranded firmware. Someone is needing that?
Click to expand...
Click to collapse
I need the italian unbranded 1.6 firmware.
Can you tell me how to downgrade the firmware too? I just tried downgrading using the last release of Flashtool and I got my phone bricked in a starting loop.
I've not uploaded my firmware yet but you can unbrick your phone flashing this one up here,root and change the build.prop with your old one, then repair with seus. It worked for me. Let me know if you need my firm, I'll upload it somewhere.
Sent from my E10i using Tapatalk
Il Tulipano Nero said:
...you can unbrick your phone flashing this one up here...
Click to expand...
Click to collapse
I unbicked my phone flashing firmware 2.1 again.
I didn't succeed flashing this 1.6 firmware. I tried with the last Flashtool 2.1.
Can you (or anybody else) give me a "how to" step-by-step in order to flash the 1.6 firmware?
No particular procedure. I've used the old one flash tool by binary and the decrypted firm. What is your exact problem? Does the flashing succeed?
Sent from my E10i using Tapatalk
Flashing succeeded, but the log reported that "userdata.sin" was not found and skiped.
When I turn my phone on it loops in starting.
Now tried three times, always solved with SEUS, but always in 2.1 firmware.
I will give it a try with an older Flashtool.
I'm back to 1.6 firmware. Thank you everybody.
I had some trouble because I didn't choose to wipe "userdata.sin".
I need to go back from 2.1 to 1.6 (1.1.A.0.8). But can't find 1.1.A.0.8
Can anybody help me?
I need to rollback the Update to 1.6 for E10a, does anybody have this one??
Thanks!!
I need to rollback the Update to 1.6 for E10a, does anybody have this one??
Thanks!!
nanoquintino said:
I need to rollback the Update to 1.6 for E10a, does anybody have this one??
Thanks!!
Click to expand...
Click to collapse
What you can do is isntall the 1.6 E10i from cocker80, then root your phone and replace the build.prop with your original build.prop, reboot and do a Seus Repair. and you should be good to go with your original rom
If you dont have your original build.prop ask for someone you know that has x10a mini same as your service provider. I could send you mine but its from claro honduras.
Hope everything goes well
Hi XDA. Please, help me to find the firmware for SE Mini E10a version 1.6 of Claro Chile. They are enormously grateful. With that, I plan to upgrade to a generic Latin American (if you know otherwise to change, please guide me.).
I am currently updated this E10a to version 2.1 with this operator, and I worry that when search networks, now can't find the 2100 MHz 3G operators.
Bye.
*****
Hola XDA. Por favor, necesito el firmware del Mini E10a versión 1.6 de Claro Chile. Se los agradeceré enormemente. Con eso, planeo actualizar a la versión 2.1 pero a la genérica Latinoamericana (si conocen otra manera mas sencilla, por favor responderme).
Actualmente mi SE Mini E10a lo tengo actualizado con esta compañía, y me preocupa que cuando busco las nuevas redes 3G 2100 MHz, ahora estas ya no salen , solo Entel, Claro y Movistar.
Saludos.
I was checking SE LAM and some1 from Bolivia updated his phone having the generic LAM 1.6
does anyone who hasn't updated to nordic has checked it?
thanks
EDIT confirmed LAM has 2.1 starting from yesterday
Just tried SEUS and PC Companion and LAM is not released.
augie7107 said:
Just tried SEUS and PC Companion and LAM is not released.
Click to expand...
Click to collapse
really? SE says it is o.0
alankstiyo said:
really? SE says it is o.0
Click to expand...
Click to collapse
Did you attempt an update?
If so, any luck?
I'm running generic LAM R2BA026 and it's telling me my phone is up to date.
nope no luck it sucks, already called SE mexico just to know wtf is going on
My bet is it will be release till the end of november, maybe even 2011...
SE doesn't care 'bout Latinamerica
I went NORDIC on sunday
and everything works a treat: NAM bands (3G) OK, teclado español OK, market OK, ALL OK
Sent from my Andoird 2.1 X10a using xda app
Whats this LAM????
Latin America.
I'm going to try when I get home.
Update: Nope, nothing new.
anyone had any luck?
called SE mexico (they control lam version) and said during the week of nov 15th but that is a step by step roll out o.0
alankstiyo said:
anyone had any luck?
called SE mexico (they control lam version) and said during the week of nov 15th but that is a step by step roll out o.0
Click to expand...
Click to collapse
Well I think I had luck, SE mexico's twitter is @MusicMonster and they answer me that the update will come in the middle of november...
I hope so...
And here is the evidence...
Here from Guatemala, I'm not waiting for LAM, that's a pain in all companies, that's why I have a nordic flashed rom
Thanks XDA.
Honestly guys, I'm in Brazil and was using lam 026 generic and flashed to 2.1 Nordic.... it's easy and everything works perfectly, including 3g...
Just my 2 cents...
Well, I got the answer from my carrier...
And it says:
@JuaNMaNX Te sugerimos verificar la información directamente con la marca del equipo...Saludos!!!
http://twitter.com/#!/Telcel
This sucks...
-_____-U
If you guys can remove Rogers crap by yourself, it seems that Rogers will release 2.1 on Nov 8th.
Well, I will actually be surprised if they will do it in time but one can only hope...
I have flashed several ROM from neo v android development section. The result is that my phone doesn't recognise my default SI number. So does sony Ericsson update service, in order to get the latest 4.0.4 update. Please guys , any possible solution or mod to this?
SI
I've tried to mod my SI seen by SEUS through changing the xml files in SEUS. I believe that by doing so , everyone will be able to official upgrade
moving this to general section
toumpanos said:
I've tried to mod my SI seen by SEUS through changing the xml files in SEUS. I believe that by doing so , everyone will be able to official upgrade
Click to expand...
Click to collapse
dude why don't you try changing the SI nums in system/build.prop ?
It seems that SEUS can't load the info from build.prop. . . I've changed them all to 1254-6062, but still S1 tool can't show this SI number
buzzzy said:
dude why don't you try changing the SI nums in system/build.prop ?
Click to expand...
Click to collapse
Because SI number isn't in build.prop.
Madfysh said:
Because SI number isn't in build.prop.
Click to expand...
Click to collapse
I believe customization SI number is in built.prop and in default.prop.
But the software SI is not in there, i agree.
Can you help me Madfysh?
toumpanos said:
I believe customization SI number is in built.prop and in default.prop.
Click to expand...
Click to collapse
There is no customization SI number.
There is customization and there is SI number.
For more info read this thread: http://forum.xda-developers.com/showthread.php?t=1604559
so I don't need to repeat it all the time.
toumpanos said:
Can you help me Madfysh?
Click to expand...
Click to collapse
Why don't you just flash 4.0.4 .ftf? I mean, since you already flashed few ftf's you already lost your original software/firmware which you had on your phone when you bought it.
To be honest, I don't understand what you mean by "The result is that my phone doesn't recognise my default SI number".
I don't know for which CDF's is ICS out on PCC or SEUS, so can't tell you what number to put in build.prop.
Maybe you can explain your wish/goal a bit clearer.
Anyway, read my thread which I linked above, maybe you will get idea how PCC or SEUS works.
[/QUOTE]To be honest, I don't understand what you mean by "The result is that my phone doesn't recognise my default SI number".[/QUOTE]
I mean that my SI from the back of my phone and the SI found in build.pro and/or what is recognized by S1tool are not the same.
[/QUOTE]I don't know for which CDF's is ICS out on PCC or SEUS, so can't tell you what number to put in build.prop.[/QUOTE]
When update serviced is launched through SEUS, there are 4 xml files created in its folder. changing their values might hopefully change the download request from their servers.
Also, SEUS seems to autoload some data for the update process from phone when connected in MSC mode. I can't figure out what to change @Madfish. I want to try to trick the detection by seus, in order to get my phone straight again. Reverting everything to as it should be.
To be honest, I don't understand what you mean by "The result is that my phone doesn't recognise my default SI number".[/QUOTE]
I mean that my SI from the back of my phone and the SI found in build.pro and/or what is recognized by S1tool are not the same.
[/QUOTE]I don't know for which CDF's is ICS out on PCC or SEUS, so can't tell you what number to put in build.prop.[/QUOTE]
When update serviced is launched through SEUS, there are 4 xml files created in its folder. changing their values might hopefully change the download request from their servers.
Also, SEUS seems to autoload some data for the update process from phone when connected in MSC mode. I can't figure out what to change @Madfish. I want to try to trick the detection by seus, in order to get my phone straight again. Reverting everything to as it should be.[/QUOTE]
Tip: Just use Repair button.
Sent from my Sony Xperia Neo V using xda premium
also CDA number stored in TrimArea I am not sure but SEUS checks over there
I have got stock GB fw .62 and created ftf file. I will create ICS ftf too. And soon will upload and share.
It's India stock fw untouched.
For SI - 1254-8966
CFD - 1254-8478_R3D
Sent from my MT11i using Tapatalk 2
a1b2c99 said:
I have got stock GB fw .62 and created ftf file. I will create ICS ftf too. And soon will upload and share.
It's India stock fw untouched.
For SI - 1254-8966
CFD - 1254-8478_R3D
Sent from my MT11i using Tapatalk 2
Click to expand...
Click to collapse
hiii can u upload n post me that link of GB fw
say2munna said:
hiii can u upload n post me that link of GB fw
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=24983670&postcount=246
Madfysh said:
http://forum.xda-developers.com/showpost.php?p=24983670&postcount=246
Click to expand...
Click to collapse
thanq bro.. :laugh:
Hello,
There is a way to get the desire ROM from what do you want from Sony Companion PC
Just Change the Si-Number?
Now the question is How exactly change the Si-Number?
simply you should change the SI number in build.prop ,
but simplest is to a program do it for you,
So I had written a small program with c++ that will do it:
Here's the link of it : Sry: had messed up with something, will try to fix it
Just open 34.exe and follow the instructions,
Or simply change si number in build.prop
SI number is different from Customization number. It won't work. SI stands for Sales Item and it describes the hardware, not the software.
Also, even though you locked the bootloader, the DRM keys are still wiped and that can be seen by Sony Serice Centres.
lollylost100 said:
SI number is different from Customization number. It won't work. SI stands for Sales Item and it describes the hardware, not the software.
Also, even though you locked the bootloader, the DRM keys are still wiped and that can be seen by Sony Serice Centres.
Click to expand...
Click to collapse
For SI number, Well that's why i said Update your phone via SUES or PC Companion after changing SI number ... it download the whole thing deppends on your SI number ... and about DRM keys ... i didn't know , thanks for sharing this ...
lollylost100 said:
SI number is different from Customization number. It won't work. SI stands for Sales Item and it describes the hardware, not the software.
Also, even though you locked the bootloader, the DRM keys are still wiped and that can be seen by Sony Serice Centres.
Click to expand...
Click to collapse
well just search for it ... how about this one? http://unlock-bootloader.com/unlock/
Doesn't work on 2012 devices.
SI is not the same as CDA. Unless Sony have merged the two recently (which I doubt).
So this is not working on Xperia U?
Odp: Change your Si Number in an easy way!
alvarorojas4 said:
So this is not working on Xperia U?
Click to expand...
Click to collapse
And you refreshed old thread only to ask this? You have answer above. Use this what you have inside in your head.
Sent from my LT22i using xda-developers app
sijav said:
Hello,
There is a way to get the desire ROM from what do you want from Sony Companion PC
Just Change the Si-Number?
Now the question is How exactly change the Si-Number?
simply you sould change the si number in build.prop ,
but simplest is to a program do it for you,
So I had written a smal program with c++ that will do it:
Here's the link of it : http://www.mediafire.com/?fdc89jh4gbb4436
Just open Ejra.exe and folow the instructions,
Click to expand...
Click to collapse
will this work on xperia j because my carrier is slow with the latest update 7.8 but sim free hand sets have it
So will it work finally? i flashed a FTF that changed my SI and I want to go back to my stock SI
ilgreco112 said:
So will it work finally? i flashed a FTF that changed my SI and I want to go back to my stock SI
Click to expand...
Click to collapse
Yes this will work! try it, (you can redo your work at anytime by pressing 2 with usb connected on either recovery or the rom with usb debugging enabled!)
good luck
please help me 1261-1054 sola
sijav said:
Yes this will work! try it, (you can redo your work at anytime by pressing 2 with usb connected on either recovery or the rom with usb debugging enabled!)
good luck
Click to expand...
Click to collapse
i am using sony xperia sola si 1261-5054(written on battery).i flashed it with other country rom,but now have a problem in it so now i want to get original firrmware,i rooted my phone and changed its si to 1261-5054.but when i connect to pc companion it will say no update available since i am in gb 2.3.7 and i gave repair my phone then it will prepare >then will ask for connecting in flash mode and then says no software awailable for your phone .but when i change my si code to 1261-7078 the it will show android 4.0.4 update available
shamshuddin said:
i am using sony xperia sola si 1261-5054(written on battery).i flashed it with other country rom,but now have a problem in it so now i want to get original firrmware,i rooted my phone and changed its si to 1261-5054.but when i connect to pc companion it will say no update available since i am in gb 2.3.7 and i gave repair my phone then it will prepare >then will ask for connecting in flash mode and then says no software awailable for your phone .but when i change my si code to 1261-7078 the it will show android 4.0.4 update available
Click to expand...
Click to collapse
try to downgrade to a lower frimware like .168 instead of .182 (just flash a .168 firmware) then change your si number to 1261-5054 in that way you will get an update for your si number (1261-5054) and you can install that update via pc companion